Database Develop

Help!! Rooting problem...i think

Okay, I've been trying to root my sprint hero for 3 days now. I flashed it to Cricket service actually. So here are the commands I am using:
C:\Users\Ashton>cd\
C:\>cd AndroidSDK\Tools\
C:\AndroidSDK\tools>adb devices
List of devices attached
HT02AHF00747 device
C:\AndroidSDK\tools>adb shell chmod 0755 /data/local/asroot2
C:\AndroidSDK\tools>adb shell
$ /data/local/asroot2 /system/bin/sh
/data/local/asroot2 /system/bin/sh
[+] Using new pipe_inode_info layout
Opening: /proc/627/fd/3
SUCCESS: Enjoy the shell.
#mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
#cd /system/bin
cd /system/bin
#cat sh > su
cat sh > su
# chmod 4775 su
chmod 4775 su
#
Okay, that's exactly what's displayed on my screen. I didn't put the # or $ signs in there. That's just what appeared as I was typing the commands. When I try to flash a recovery image, it won't install. I get a Signed Failure error. Any ideas? What am I doing wrong? Also, does a cricket rom for sprint hero exist? Or should I use a Non-Sprint ROM? I mean, it's a sprint hero, but it has been flashed. Thanks Everyone!

This has nothing to do with Development.

...sorry, i thought...
I'm not sure where else to post it. I thought it did, since the rooting guides and roms are posted under Development.

Would the General are be more appropriate? I'm not trying to post in the wrong places. But I don't want to post there and get the same response. lol, Just need help. Not looking to tick anyone off.

This has nothing to do with Development.
Click to expand...
Click to collapse
Not being mean but who made you the cdma hero police.. you never actually help anyone. just tell them they are wrong for posting here.
to the OP, try to type
exit
adb shell
then the rest of flashing instructions
Sent from my HTC Heroc using the XDA mobile application powered by Tapatalk

Thanks Jus10o. I'll try that. Sometimes I miss windows mobile. Lol, flashing android is a pain.

ashton2091 said:
Thanks Jus10o. I'll try that. Sometimes I miss windows mobile. Lol, flashing android is a pain.
Click to expand...
Click to collapse
I came from WinMo as well. Trust me, once you get the hang of it, it's easier and faster than RUUing every time.

Okay, I tried the above. Here's what I happened. I am rooted (i think). I used a file explorer to to backup the recovery image. It said it was successful. Then I rebooted into the Recovery Menu. Still looks like the stock one. Three lines of options with blue fonts. I try updating the image from there, but all I get is "Can't open /cache/recovery/command". fustrated, It sucks to be a noob all over again.

I forgot to mention, I also did a factory reset before trying to write the image as suggested in the instructions.

Thread moved.

Jus10o said:
Not being mean but who made you the cdma hero police.. you never actually help anyone. just tell them they are wrong for posting here.
to the OP, try to type
exit
adb shell
then the rest of flashing instructions
Sent from my HTC Heroc using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
ROFL ROFL ROFL You GO Girl! What rock have you been under? I do nothing BUT help in these forums. Also, I DID tell the OP they posted in the wrong section. Im pretty sure when I said "This has nothing to do with Development." that meant he posted in the wrong section. By the way, the mods made everyone the CDMA Hero Police. Apparently, you cant read the forum rules and guidelines either. Here, let me help you,
http://forum.xda-developers.com/showpost.php?p=6372744&postcount=2
From Ryan's quote,
Mods, including myself, are not here to keep the forum organized after the fact, we need your help to keep it organized, clean and grouped.
To the dedicated members that care to keep this forum, subforums included, clean and organized and grouped.
Please start reporting threads to the mods to take action. Using this button.
Click to expand...
Click to collapse

Look everyone, don't get at each other like that. It's not cool. Lol, it's okay. I really didn't know. I mean, the fact that the rooting section was here, I thought it was okay to post here. But hey, it's in the right place now. I understand the forums can't be trashed with everything posted everywhere. Lol, really it's cool.

ashton2091 said:
Look everyone, don't get at each other like that. It's not cool. Lol, it's okay. I really didn't know. I mean, the fact that the rooting section was here, I thought it was okay to post here. But hey, it's in the right place now. I understand the forums can't be trashed with everything posted everywhere. Lol, really it's cool.
Click to expand...
Click to collapse
Dont boot into recovery, just boot up your phone and do this....
Put the New recovery image on your sdcard, by either opening it up on your computer. Or put the file into your c:/android-sdk/tools folder and type this
adb push NameOfRecovery.img /sdcard/ (make sure you name recovery the exact name as it appears on your computer or rename it to just "recovery" so its easy to remember)
once its on your sdcard and your phone is on charge only.. Not mounted to the computer type this
adb shell
cd /sdcard/
flash_image recovery NameOfRecovery.img

Okay, I think I know what the prob is now. Even if it's not the prob, it will have to be fixed. I have the wrong stock image. I have v1.56 which I think blocks rooting. Trying to downgrade. Thanks Everyone

X is Rooted

According to a new thread in the General section posted by Zanix, the Droid X has been rooted. Birdman has achieved root and here are the instructions.
We haz Rootz!
WE HAZ ROOTS!. Thanks to Birdman. Here is the directions.
Step 1: Set up ADB
Step 2: Push exploid to /sqlite_stmt_journals "adb push exploid /sqlite_stmt_journals"
Step 3: type "adb shell"
Step 4: type "cd sqlite_stmt_journals"
Step 5: type "chmod 755 exploid"
Step 6: type "./exploid" and follow directions on screen
Step 7: type "rootshell"
Step 8: type in password "secretlol"
Step 9: your in root!
Step 10: mount your sdcard to pc and put Superuser.apk and su in the sdcard
Step 11: unmount sdcard
Step 12: in adb (make sure your still in root with the # sign) type in:
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- chmod 4755 /system/bin/su
your done! feel free to kill the bloat apps snd such ;
NOTE: it might be a smart idea to do "rm /system/bin/rootshell" after you have su and superuser in place as ANY program will have access to your root if you leave it (cause everyone will know the password)
Credits:
- Sebastian Kramer for this blog post - http://c-skills.blogspot...07/android-trickery.html
- Birdman - for editing Sebastians work for the droidx
- [mbm] - for answering birdmans many questions while root was tried (and failed xD)
The blog list:
- Birdman - @mrweeeedbirdman - http://stevenbird.info Donate to him here - http://tinyurl.com/32tj73j
You can find the files here along with the instructions which I have reposted from Droid X forums
http://www.droidxforums.com/forum/droid-x-hacks/1314-we-haz-rootz.html
I take no credit for any of this.
Another link for those that may have issues with these instructions above. Make sure you put the Superuser.apk and Superuser on your SD card b4 beginning. http://alldroid.org/default.aspx?g=posts&t=493

dscottjr81 said:
According to a new thread in the General section posted by Zanix, the Droid X has been rooted. Birdman has achieved root and here are the instructions.
We haz Rootz!
WE HAZ ROOTS!. Thanks to Birdman. Here is the directions.
I take no credit for any of this.
Click to expand...
Click to collapse
works like a charm! let the bloat-unloading begin!!!

My X should be here this afternoon! WOOT!

hey guys, im at my work computer and dont have abd shell on it, could you point me to the best place to download it?

wardo5757 said:
hey guys, im at my work computer and dont have abd shell on it, could you point me to the best place to download it?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html

This is fantastic news, and very unexpected TBH. One question though:
1. How much does rooting the phone contribute to unlocking the boot loader? I want Cyanogen .

switt said:
This is fantastic news, and very unexpected TBH. One question though:
1. How much does rooting the phone contribute to unlocking the boot loader? I want Cyanogen .
Click to expand...
Click to collapse
Birdman did say that milestone and droid x have same security measures.
Which probably means that DX just caught up to where milestone has been for months.
I guess that's a start, but I highly doubt unlocked bootloader, personally.

**nevermind**

I installed setcpu.and it allowed me to change the min value and updated to the new value. How can i test to see if it really increased it? Going to info shows the new value by cpu freq as well.
Sent from my DROIDX using XDA App

this is excellent news... ^_^

OMFG! DROID X, here we come!! it works like a charm

XDA RULEEESSSS!!!!!
Wow fantasticcccc!
XDA You're the BEST!

For those having trouble:
I couldn't get the damn thing to unmount in Windows so after I copied su and Superuser.apk to the SDCARD I just unplugged my phone, loaded a terminal emulator from the market and finished the rest of the commands directly on the phone.
Worked like a charm, thanks to all involved with the root!

Mike919 over at irc was the first bricked droid x that they say provided some good info. Well he bricked for the overall betterment of droidkind. Here's to u mr. Cellphone bricker man, this roots for u!
Sent from my DROIDX using XDA App

ksizzle9 said:
Mike919 over at irc was the first bricked droid x that they say provided some good info. Well he bricked for the overall betterment of droidkind. Here's to u mr. Cellphone bricker man, this roots for u!
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
LOL, i'm gonna pour one out for my bricked homey

HA now i've decided between the incredible and droid x, X it is!!

Simple Process. Way to go everyone.

So now that we're rooted, what can we do other than removing apps with adb? Is it even worth the rooting without an unlocked bootloader? Like if all people care about are removing apps, why don't they just use Startup Auditor?

iRMac said:
So now that we're rooted, what can we do other than removing apps with adb?
Click to expand...
Click to collapse
Free WiFi tether for one.

Could all of this be done from the phone? Can exploid and superuser be downloaded from somewhere? I am at work and want to root badly!

[HowTo] ClockWorkMod Recovery

Thanks to Trekfan422991 for cluing me in on the Optimus 3D recovery.
Working:
Nandroid
ADB (after special driver install, need to tweak recovery for it to work with normal drivers)
Mounting USB to computer
Flashing zip files
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
I am in the process of making a recovery specifically for our device, it is mostly done and will be posted here when it is ready!
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
If you don't understand something in that list, DO A SEARCH AND LEARN, don't clutter the thread with crap!
Lets get started!
Lets start by getting the recovery.img file on the phone. Open up a cmd prompt and type:
Code:
adb push recovery.img /data
The rest of this will be done on the phone shell. In the cmd prompt type:
Code:
adb shell
We will need to have su access, In the cmd prompt type:
(If you haven't allowed shell su in SuperUser now would be a good time to accept the root request on the phone.)
Code:
su
Now we are going to backup your current recovery to your sdcard. In the cmd prompt type:
(make sure your sdcard is not mounted to your computer)
Code:
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
After that is done we are going to flash ClockWorkMod Recovery! In the cmd prompt type:
Code:
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
Congrats! You now have ClockWorkMod Recovery! In the cmd prompt type:
(each line is single command)
Code:
rm /data/recovery.img
reboot
How to enable ADB access: (only if it's not working already)
Download and install: (unzip and install the 2 exe files)
http://www.mediafire.com/?j5m1plnvzb8r0zc
While booted into ClockWorkMod Recovery, go into your device manager, you should see an "LGE Android Composite Device" with a yellow triangle on it.
right click on it, update driver software...
select browse my computer for driver software
select let me pick from a list of device drivers on my computer
click the "Have Disk" button
click the "browse" button
browse to;
for 64bit:
C:\Program Files (x86)\LG Electronics\LG Android Driver\64BitADB
for 32bit:
C:\Program Files\LG Electronics\LG Android Driver
and select lgandadb.inf
click "ok"
From that list select "Android Sooner Single ADB Interface"
click "next"
click "yes" on the popup
Click to expand...
Click to collapse

Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose. Good thing I am having issues with permissions with this didn't notice the SD Card Mounting issue till just now. That I can't deal with atm.

malickie said:
Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose.
Click to expand...
Click to collapse
I found a few modes, but no drivers yet so I don't know what they are. Even if we break stuff the kernel and recovery are separate, so technically we should always be albe to get back into recovery to fix stuff.

thankyou DG for getting this started..
so now with my clockworkmod i just made a backup of stock rom... if i say change the framework and I get boot loop.. will this clockwork mod be able to restore the original rom without any problems???

tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...

Trekfan422991 said:
tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...
Click to expand...
Click to collapse
I got mixed up as to what partition to flash, you just flashed a recovery image over the kernel... its ok tho.
follow my instructions to the su part, then do this.
// this will restore the kernel
dd if=/sdcard/mmcblk0p5.backup of=/dev/block/mmcblk0p5 bs=4096
// this will backup recovery
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
// this will flash cwm
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
OP is fixed!
edit--
and you have no adb access, this is going to get interesting!

haha... i shoulda noticed
____

LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha

Trekfan422991 said:
LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha
Click to expand...
Click to collapse
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.

47r0n1n said:
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.
Click to expand...
Click to collapse
sorry just side note:
how you liking your thrill compared to the evo 3d???

designgears said:
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
Click to expand...
Click to collapse
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?

Komodo Rogue said:
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?
Click to expand...
Click to collapse
I took it down for now, working on some issues.

Woohoo, got Trekfan422991 all fixed!

its true... i tested out my framework mod and it works great!!! look sway better then stock!!!

designgears said:
I took it down for now, working on some issues.
Click to expand...
Click to collapse
Ah, gotcha. I thought I was going crazy Thanks!

Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!

designgears said:
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
Click to expand...
Click to collapse
After CWM is installed and working on our device, would it be safe to fix permission in "ROM Manager," or does that just fix permissions through whichever recovery is currently installed?
I'm guessing someone here knows how ROM manager works in this regard, but if not, I'd be happy to be a guinea pig... after all, I can make/restore backups now! : )
gtg465x said:
Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!
Click to expand...
Click to collapse
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be

Komodo Rogue said:
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be
Click to expand...
Click to collapse
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.

Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?

gtg465x said:
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.
Click to expand...
Click to collapse
Oh, good to hear! Man I really have to sit down and try to learn some more technical stuff sometime, because ROM creation, and not even just the theming aspects, is so appealing to me.
Maybe you can create a thread placeholder and describe what you've done so far? We're really getting OT, sorry all.
timbrendelaz said:
Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?
Click to expand...
Click to collapse
Oh, I thought you could flash zips through adb after doing the fix? Or no? (((edit: wait, no, I was thinking about pushing .apks through ADB, not flashing .zip files))) Hopefully this is something DG's new recovery might address. If no to both, could you distribute ROMs via nandroid backup files of a fresh ROM installation? It would be incredibly inefficient, but it would work, right?

Flash recovery with adb

Really didn't want to start a new topic, but couldn't find an answer anywhere. I'm trying to flash dg's recovery with adb. When ever I try to push the file I get permission denied. I have su working with adb, and adb is working correctly. What am I doing wrong? Thanks to any one that can help.
Sent from my LG-P925 using XDA App

I am having the same exact problem you are. I am running windows 7 and even tried cmd and run as admin but that didn't work either. Anyway yea any help would be appreciated. Also yes my phone is rooted and in Debug Mode when trying to push recovery.img.

Hmm, sorry I don't know. Fix permissions maybe, if you can? Stupid little things like making sure usb debugging is on?
Just a heads up, questions belong in a different section ("Q&A for Thrill" if it exists, or general I think), they take that stuff pretty seriously around here, and if you end up reading and learning here for a while, you'll understand why!

switch to your ADB directory (or at a command line if you already set your environment variables) and type adb root then try again. It might work

Komodo Rogue said:
Hmm, sorry I don't know. Fix permissions maybe, if you can? Stupid little things like making sure usb debugging is on?
Just a heads up, questions belong in a different section ("Q&A for Thrill" if it exists, or general I think), they take that stuff pretty seriously around here, and if you end up reading and learning here for a while, you'll understand why!
Click to expand...
Click to collapse
I dont think we have a q&a as of right now lol....I dont even know if we have a moderator
Sent from my SAMSUNG-SGH-I997 using XDA App

Sorry if this is the wrong section. No q/a for the thrill. And i didn't know if the general forum was the place for adb question. Again sorry my fault. Thanks for all replays but im still stuck with the same thing.

adb root didn't work. Said adbd cannot run as root in production builds. Also I do have USB Debugging enabled as well as Rooted the device. As for fixing permissions I would need CWM First to be able to get to that option

malickie said:
adb root didn't work. Said adbd cannot run as root in production builds. Also I do have USB Debugging enabled as well as Rooted the device. As for fixing permissions I would need CWM First to be able to get to that option
Click to expand...
Click to collapse
Do this:
open command prompt and type:
adb shell
su (click allow on phone if prompted)
chmod 777 /data
ls -l (then look at the data directory and it's permissions should now be drwxrwxrwx)
Try it again after that. It's because the /data directory is not set to R/W by default.

timbrendelaz said:
Do this:
open command prompt and type:
adb shell
su (click allow on phone if prompted)
chmod 777 /data
ls -l (then look at the data directory and it's permissions should now be drwxrwxrwx)
Try it again after that. It's because the /data directory is not set to R/W by default.
Click to expand...
Click to collapse
Thank You, that did it .

malickie said:
Thank You, that did it .
Click to expand...
Click to collapse
Cool beans

Thanks so much!!!

00mred00 said:
I dont think we have a q&a as of right now lol....I dont even know if we have a moderator
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
It says Mr. Clown is the moderator, and his sticky says not to ask questions. I don't know if I've actually seen him on here though, so I see where you're coming from, the thrill isn't getting much traffic! But you're right, no q&a section.
fn1046 said:
Sorry if this is the wrong section. No q/a for the thrill. And i didn't know if the general forum was the place for adb question. Again sorry my fault. Thanks for all replays but im still stuck with the same thing.
Click to expand...
Click to collapse
Oh hey no worries mate. I really couldn't care less, considering how empty Thrill Development is, and I would have came to the same conclusion as you. All I meant to do was give you a heads up that some people get angry about that kind of thing

Well my issue is i cannot get the recovery.img pushed to the phone...ive downloaded it and don't know where to place it for it to send...when i do adb push recovery.img/data it just gives me a list of all the adb commands. I was gonna try to use root explorer and manually push it but i dont know where to place it...any suggestions?

Put the recovery.img in your android-sdk tools folder before you try to push
Sent from my LG-P925 using XDA App

Hey can one of you guys possibly upload a stock recovery backup. I think mine is borked as I tried to go back to stock and it keeps going into clockworkmod recovery when setting up factory defaults in the stock rom. It would be much appreciated.
thanks

install ubuntu 12.04 on HP Touchpad

hi all. i'm new in android and i dont like that,
many person can install ubuntu 12.04 on TouchPad. but i cant.
how can help me for installing that ( doual Boot).
in android os.after entring this command:
Code:
cp 4GBPartition.sh /tmp
that say:
Code:
/tmp - Not a directory.
i have tmp in root directory but i cant access into that.
Code:
-rw-rw-rw- root root 1824 DATE TIME tmp
after entering this command:
Code:
ls -d */
i cant see tmp in list and i cant create that
i have this problem now:
Code:
/system/bin/sh: cd /tmp - Not a directory

1) Boot on Webos
2) Install preware (many docs on google)
3) open xecutah, then xterm
4) cd /media/internal
5) cp 4GBPartition.sh /tmp
6) cd /tmp
7) sh /tmp/4GBPartition.sh
Click to expand...
Click to collapse
Be carefull... This PORT of Ubuntu isn't for beginners... It's not like your desktop PC, many thing don't work..

Mystikal57 said:
Be carefull... This PORT of Ubuntu isn't for beginners... It's not like your desktop PC, many thing don't work..
Click to expand...
Click to collapse
then can i use keaybord usb and mouse usb?
can i install libreo office - firefox?

tux-world said:
then can i use keaybord usb and mouse usb?
can i install libreo office - firefox?
Click to expand...
Click to collapse
OK I'm not trying to be rude here but you started a new thread that is a little misleading in the title to ask for help that you already asked about in the other thread? This is not a novice install... The instructions are clear, if you can't get it installed by following the clear guide... You may not want to install this. Sorry Devs but when you take your time to make CLEAR guides for us... yet people can't follow instructions then spam.It irritates me.

kicker22004 said:
OK I'm not trying to be rude here but you started a new thread that is a little misleading in the title to ask for help that you already asked about in the other thread? This is not a novice install... The instructions are clear, if you can't get it installed by following the clear guide... You may not want to install this. Sorry Devs but when you take your time to make CLEAR guides for us... yet people can't follow instructions then spam.It irritates me.
Click to expand...
Click to collapse
The instructions may be clear, but are almost always only available in English. XDA is international and judging from his sentences, English is probably not his primary language.
It bothers me too when people create pointless threads (esp with misleading titles). I try to imagine myself on a non-English forum, desperate for help. Even with Google translate, I doubt I could make sense of their rules or "clear" guides.
エイトリックス から 送ります

in install progress that ask you must press 0 or 1, after downloading and install kernel of ubuntu , what key must be pressed?
i dont see any line like umount. i see data lose :|
message is this:
Code:
Repartition to create ext3 volume for Ubuntu.
umount: can't umount /media/internal:Invalid argument
Did the pervious line say somthing about not being able umount /media/internal? if so, press 1, otherwise press 0.
DO NOT PRESS 0 IF DID SAY SOMTHING; THIS CAN LEAD TO DATA LOSS! If it did say somthing,reboot and try again.
after reboot i see this line. external memory may be data loss?