Database Develop

Review: U-BOP BoldFLEX Silicone Skin for HD2

Hi all,
My new silicon case just arrived.
If you're wondering, or looking, it's this one.
I thought I give a small review
Ordered the case via U-Bop's Amazone shop on dec 10, arrived today dec. 17. Not bad for normal airmail shipping I guess. total price 11,23£ shipping included.
Now, about the case:
Grip feels good, not slippery but the nice feel of rubber but a little smoother.
All cut-outs seem ok, there's enough room in the front for all sensors located around the speaker on the top. I was a bit scared that the bottom "rounding" would interfere when you try to use the hardware keys but that is ok*.
On the left side, where your volume buttons are, the case has a special bevelled surface so you still feel where the buttons are. Very nice touch I think making it easy to find the volume buttons without have to make a cutout for the buttons which would result in another dust-gathering trap
The down side of things then: although the case is advertised as being "skin-tight" and "form-fitting" the truth is: it sits to loosely to my liking. I would think that if you make something that is supposed to be form-fitting and skin-tight etc then it would need at least some effort to slip my HD2 in there and it would be as tight as .... well think "men in tights" (was the first thing that slipped in my mind) ...
Honestly. I think if I drop my phone it would be well protected for the first bounce.... but I'm scared it might just be thrown out of the case on impact!
It just feels a bit to 'light' and not much of the tight etc is noticeable.
Another small think I immediately notices was that the moment I had slipped it on and carried it around for a few hours in my pocket, dust appeared out of nowhere, clinging on to my screen where I had never seen it before?!? Strange as I always carry it in my pocket and I can't really remember ever having dust there that clearly... I'll see if that clears after a few days use.
I took some pictures and a small movie to give a general idea of what I mean.
So overal:
the PRO's
- good feel
- anti slip
- drop protection (100% for the first impact... guess % goes down with each consecutive bounce )
- all sensors, camera, flash leds, 3.5mm jack and micro USB are reachable
- volume keys can still be located through touch feeling
- cheap
the CONS
- not at all skin tight as advertised
- dust-magnet?
hope you liked the review. I'm interested en opinions of people using other types of silicon cases that do feel skin tight and secure so let me know what you have!
link to youtube for the movie : http://www.youtube.com/watch?v=YZ3fMmOg-zs

Thanks for the review. It looks cool for the most part other than it's not skin tight...

To be honest, I'm getting more and more dissatisfied by the day
Taking the phone out of the pocket is a sure way to get at least 1 corner of the silicone case dislodged from the phone. Sometimes even the two top corners come off so you end up fetching the phone without case
And I can also confirm that the case is a dust magnet in the meantime... so no good there either...
I think I will be filing for the 14 day money back guarantee on this one and trying another one...
DicE
galaxys said:
Thanks for the review. It looks cool for the most part other than it's not skin tight...
Click to expand...
Click to collapse

Yep I'd have to agree 100% with your review, bought one of these cases on ebay and initially thought it was good, but as you say it's not skin tight it's more "underpants tight"...so the case does come off sometimes when you take the phone out of your pocket as it sticks to your pocket...and if you are looking for a static dust magnet this wouldn't go amiss...

Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas

shrink? you sure about that? Haven't tried that.
case could do with a wash though since it has been sucking in dust like a black whole for the past couple of days so... let me give that a try
If we're sure of one thing then it's that it wont break the case
DicE
Lukasss said:
Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas
Click to expand...
Click to collapse

DicEvsTytnII said:
shrink? you sure about that? Haven't tried that.
case could do with a wash though since it has been sucking in dust like a black whole for the past couple of days so... let me give that a try
If we're sure of one thing then it's that it wont break the case
DicE
Click to expand...
Click to collapse
Did you try it? Coz now I'm curious myself...

Lukasss said:
Just an idea guys, but does silicone shrink when exposed to heat? If so, you could try bathing it in hot water to shrink it a little... ?
Grtz
Lukas
Click to expand...
Click to collapse
I very much doubt it will shrink. They use silicone like this as baking trays!!

HTC hard case

I bought a blue hard case made by HTC at radioshack. It is nice but it makes the keyboard hard as heck to slide out.
seen here
Still, decent case for now.

EricSS619 said:
I bought a blue hard case made by HTC at radioshack. It is nice but it makes the keyboard hard as heck to slide out.
seen here
Still, decent case for now.
Click to expand...
Click to collapse
I got it too, seems like the keyboard is equally hard to slide out either way(with or without the case) for me, just a thought. I like the case though.

I've got it too. I like it a lot. I've never been a fan of cases on sliders, but this works pretty good.
Sent from my PG06100 using XDA App

And the rubberish back on it I would think make it less likely to slip out of your hand.

herbthehammer said:
And the rubberish back on it I would think make it less likely to slip out of your hand.
Click to expand...
Click to collapse
The back is like my favorite part of it. Makes setting it down very nice and secure.

Does it protect the camera lens well? My only complaints so far are the volume rocker and when I put the phone down face up, the camera lens rubs up against whatever surface I put it on.

numsey said:
Does it protect the camera lens well? My only complaints so far are the volume rocker and when I put the phone down face up, the camera lens rubs up against whatever surface I put it on.
Click to expand...
Click to collapse
Yeah the camera is back from the case so when you set it down its completely off the ground.
Sent from space!

That's the case my g/f got for her Shift. I actually don't like how the rubber provides a little bit of resistance when you pull it out of your pocket. Do you notice that? Or am I making that up?
I'm holding out for an offering from either Otterbox (Commuter or Impact) or Seidio (Active or Surface).

I don't notice it, but when I pull out my phone my hand covers the back.
Sent from my bathroom, with toilet paper.

Funny you post this actually. Ordered this same exact thing from un-heard of website. It was on back order though, and sadly sprint didnt have this listed when the phone first came out. Wish I ordered it from them. Would have been tons faster.

got my wife this case and hers slides out fine.

got two of these (wife and I) I'm really liking these cases, nice and snug, and I like that it holds the kb firm without stressing it (don't really use it anyway) most of the slider cases have those flimsy clips that hold it on, but these are nice and wide so they don't look like they'll crack any time soon. And yes the rubbery part on the back is very nice, gives it a solid grippy feel.

Samsung flip cover, Some thoughts and mini review... On the fence? Read this

First off... The Good:
It seems to protect the screen really well, I like that I can put it in my pocket and not worry about the screen. Even though I carry just my phone in that pocket, I still manage to get scratches on a screen protector. I know the protectors scratch easier, but its still the only thing in there...
Its slim and does not add bulk to an already very large phone.
The lining helps keep fingerprints to a minimum.
It looks really good.
The Bad:
It only protects the screen... and only when in your pocket. It does not latch closed in any way, so if you drop the phone it can come open during the fall, or if you put it in a pocket or purse with other objects, they can work under the cover. Flat objects (say an MP3 player, would probably be fine)
The back and sides are not protected in any way, so some may not like that.
The Ugly:
Its designed all wrong... it is... Most of the worlds population is right handed, yet this cover is designed to best work for a left handed person. (and even the copies, and heck even the iPad "smart" cover do this)
As a right handed person, when I use my phone, I usually hold it in my left hand, and interact with the screen with my right hand... this is doubly true for this phone due to the stylus.
Even when using it one handed, the case flips open the wrong direction. It opens toward my thumb when holding it in my left hand. So instead of grabbing the phone, and using my thumb to just flip it open and let it hang there as I type out a quick text, IM, or other such actions, I must use both hands to open the cover.
I also keep my phone in my left front pocket, because it allows me to grab the phone with the hand that holds it the most, as I want my right hand free to do other things or to interact with the phone. If I kept the phone on my right side, this issue would admittingly be less a hassle, but I have other important things over there... My Space pen (as it is compact and slips in my key pocket easy) Keys... a pocket knife with a pocket clip... I even started carrying other things in my right pocket that normally went into the left, before phones became too large, and in-pocket slip cases with clips became extinct.
Think I am full of it or just complaining? If you have a flip cover, try this little experiment.
Put the phone down, cover closed, and pick it up with your left hand, and then open the cover.
Now put the phone down, and place it upside down (top of phone pointing down, so the screen is upside down when looking at it) so the cover opens to the other direction.
Pick the phone back up with your left hand and open the cover again.
See how much easier it is to manipulate?
Final thoughts:
I really want to like this thing... and I do in a lot of ways, but I will definitely need to spend a little time with it to see if I can overlook its major shortcoming.
Why Samsung didn't make two versions, one that opened each direction, I don't know...
They have some TPU style cases that include a flip cover, and the Note II is fairly symmetrical, so a little modification might allow one of those to be put on backwards, and then work as I want.
Edit:
Returned the flip cover today... it just didn't work for me. If you like it and it works, good on you and stick with it.
I ordered a TPU case and will see how that does.
I am having issues with the larger size of this phone, one handed operation is not easy. Mostly it is getting to the back button, and the "send" button for messages. (as the enter button does not send) I may or may not be keeping the phone... we will see.

I always use my phone with my right hand, but I rarely use the stylus. Landscape keyboard typing is faster and I don't care to draw or hand write much. I'm surprised it doesn't have a way of staying shut - that really defeats the purpose of it.

I work aviation... and quite often I find myself crammed into small places working, and can't spare or get my right hand to my pockets (or where ever I placed the phone) very easily. Plus just general moving around about the house, I use my phones with my left hand. I like having my right hand free just in case I need to do something.

So far, I'm always holding the Note with my left hand, and writing with the s-pen with my right hand (or thumb typing in portrait with both hands).The flip cover makes sense to me as the edge of the cover isn't digging into my (left) palm when my left hand is cradling the phone.
To each their own!

Marine6680 said:
I like having my right hand free just in case I need to do something.
Click to expand...
Click to collapse

What about taking pictures though. Seems like it may be a hassle to take pictures with the flip case

Um...which is my left hand and which is my right?:cyclops:
JK...yeah OP I agree with a lot of what you say...I'm not a huge fan of the cover.

omgitswes said:
What about taking pictures though. Seems like it may be a hassle to take pictures with the flip case
Click to expand...
Click to collapse
Seems like anything with the flip cover on the phone is a hassle, still like it but needs some side protection

omgitswes said:
What about taking pictures though. Seems like it may be a hassle to take pictures with the flip case
Click to expand...
Click to collapse
That's a pretty good point. I bet a lot of people don't think about that before buying it.

I agree with the OP, but I have to say the stock flip case is the coolest case I have ever seen. It adds almost no bulk to the phone and protects the screen perfectly. I, and everyone who has seen mine, LOVE it.

I have one and can use it with right or left hand no problem, you just get use to it. It's not ideal for everything, but it's workable.
As for using the camera, I just let it hang down out the way for landscape and hold it out the way for portrait. The ability to use voice to take photos is a big plus here
I also have a ShockSock which protects the whole phone when I'm out and about.

I'm learning to use it... but I am still unsure.

Marine6680 said:
First off... The Good:
It seems to protect the screen really well, I like that I can put it in my pocket and not worry about the screen. Even though I carry just my phone in that pocket, I still manage to get scratches on a screen protector. I know the protectors scratch easier, but its still the only thing in there...
Its slim and does not add bulk to an already very large phone.
The lining helps keep fingerprints to a minimum.
It looks really good.
The Bad:
It only protects the screen... and only when in your pocket. It does not latch closed in any way, so if you drop the phone it can come open during the fall, or if you put it in a pocket or purse with other objects, they can work under the cover. Flat objects (say an MP3 player, would probably be fine)
The back and sides are not protected in any way, so some may not like that.
The Ugly:
Its designed all wrong... it is... Most of the worlds population is right handed, yet this cover is designed to best work for a left handed person. (and even the copies, and heck even the iPad "smart" cover do this)
As a right handed person, when I use my phone, I usually hold it in my left hand, and interact with the screen with my right hand... this is doubly true for this phone due to the stylus.
Even when using it one handed, the case flips open the wrong direction. It opens toward my thumb when holding it in my left hand. So instead of grabbing the phone, and using my thumb to just flip it open and let it hang there as I type out a quick text, IM, or other such actions, I must use both hands to open the cover.
I also keep my phone in my left front pocket, because it allows me to grab the phone with the hand that holds it the most, as I want my right hand free to do other things or to interact with the phone. If I kept the phone on my right side, this issue would admittingly be less a hassle, but I have other important things over there... My Space pen (as it is compact and slips in my key pocket easy) Keys... a pocket knife with a pocket clip... I even started carrying other things in my right pocket that normally went into the left, before phones became too large, and in-pocket slip cases with clips became extinct.
Think I am full of it or just complaining? If you have a flip cover, try this little experiment.
Put the phone down, cover closed, and pick it up with your left hand, and then open the cover.
Now put the phone down, and place it upside down (top of phone pointing down, so the screen is upside down when looking at it) so the cover opens to the other direction.
Pick the phone back up with your left hand and open the cover again.
See how much easier it is to manipulate?
Final thoughts:
I really want to like this thing... and I do in a lot of ways, but I will definitely need to spend a little time with it to see if I can overlook its major shortcoming.
Why Samsung didn't make two versions, one that opened each direction, I don't know...
They have some TPU style cases that include a flip cover, and the Note II is fairly symmetrical, so a little modification might allow one of those to be put on backwards, and then work as I want.
Click to expand...
Click to collapse
This is probably the most intelligently written and concise review I have ever read, both on this forum or on an actual review by a professional.
I totally agree with the left hand using it as a right handed person. I just received mine about an hour ago and I love the look, but I think I will be selling it as I don't want to screw it up so I can say it is indeed new. What a shame really. And yes the camera becomes a big issue.
I do think I would tire of opening the cover constantly as well. To each their own.
Sent from my SPH-L900 using xda premium

CitizenLee said:
I have one and can use it with right or left hand no problem, you just get use to it. It's not ideal for everything, but it's workable.
As for using the camera, I just let it hang down out the way for landscape and hold it out the way for portrait. The ability to use voice to take photos is a big plus here
I also have a ShockSock which protects the whole phone when I'm out and about.
Click to expand...
Click to collapse
As if we didn't look silly enough already when holding it up to take pictures lol

I love the flip case. After just a few days I've gotten used to handling and have adjusted completely to it. It's just natural at this point.
Sent from my SAMSUNG-SGH-I317 using xda premium

I was set on getting one. I only wanted a case that matched the color of the phone. When I went to the AT&T store to buy one, the rep said most of what you said. And how it got on his nerves to have to flip it around to ever use the phone. He had a S III (man I wish the Note was available in that garnet red). I played with a display that had one, and while it was soft and seemed like it would help wipe finger prints off like my TouchPad case does, it did worry me about flipping it open each time.
Just finally got the Samsung TPU case and my vinyl sample today. I am liking the case. Not bad for $18 with the Samsung coupon. Really tight, snug, and doesn't impede the S-Pen. Not as rubbery as I thought, I was worried it would be rubbery and sticky in the pocket.
I'm still getting used to the idea of a phone that isn't naked. After all these years of phones I haven't used a case before this phone.
Sent from my Note ][

jdyowa said:
This is probably the most intelligently written and concise review I have ever read, both on this forum or on an actual review by a professional.
Click to expand...
Click to collapse
I try... but I don't think I'm that good.
quarlow said:
I'm still getting used to the idea of a phone that isn't naked. After all these years of phones I haven't used a case before this phone.
Click to expand...
Click to collapse
As phones have gotten larger and even heavier, clumsiness increases... having a slick feel and no texture increases this.
After using this thing a couple days... I really think a case with some shock protection is in order. So I ordered a matte clear TPU case, matte for a little extra grippiness... and the TPU is stiff but absorbs a lot of shock when dropped.

I use my phone with my left hand, pretty much 100%. As such, I knew the stock flip would be a problem for me. I looked high and large for a vertical flip, and the best I found was this one:
http://www.amazon.com/gp/product/B009VKSVEW/ref=oh_details_o01_s00_i00
I have never been a fan of cases, but this thing is so large it is inviting danger, so I figured I'd give one a chance. I also dislike the rubber cases. I like clean, smooth, and easy to use without having to rethink my entire phone operation. I thought the flip at the bottom might get in the way, but I find myself holding the entire thing between my middle and little fingers, and I actually have better reach one handed now. I still don't keep it on all the time, but I won't leave home without it now. It does add some bulk, but it was the only vertical flip that had a latch that didn't add even more bulk. My wife laughed when I made a phone calk and let the flap just hang under the phone since it hung to my chest...the front has a squishier padding over the stiff inner piece, the back is much firmer. The flap actually stays shut, but I can flick it off with one finger and be using my phone, even when walking two puppies.
I'll put up some pics of it on my phone, once I find some time.

I like the looks of the flip case but functionally it hinders my use of the phone. First time some one called me I about dropped it trying to hold it appropriately up to my ear for talking.
And especially the price...I returned mine within a day.

Im right handed and always hold with my right hand. I have had the flip case on the last 3 devices ive had.. love it! Its not for everyone, but I think its awesome.. and for the record, im willing to bet if you started a poll, right handed ppl hold their note (or ANY phone) right handed and do other things with their left (im holding a cup of coffee right now). If you can thumb type real well with your left hand then you are probably not right handed.. the reason I say this is because I believe Sammy does their homework with things like this.. a righty holding with left is probably in the minority.
Sent from my AT&T Galaxy Note II /w wireless charging.

Review- Artech 21 Vintage Full Grain Leather Wallet Case

I received this case by requesting it here
With that said, here's my initial thoughts on the case:
It arrived well packaged from Amazon, as most items I order are.
The case itself feels nice in the hand and does not really bulk the phone up like I expected it to do. Its stitched all the way around with no fraying and the edges are rolled over allowing for an appealing look. It has the magnet clasp that does cause a bit of havoc with the s-pen, but no too bad and thats to be expected with a magnet. I attached an image showing lines drawn and the magnets field to give you an idea of what to expect. Overall the exterior of the case is nice, feels good in hand and I like it.
Moving inside, it does have 4 slots for cards and an opening for bills on the left side, my cards slid in and out without issue and just enough is left exposed so you can grab them easily, the same stitching in used on the inside, however, around the card slots it appears to be rolled and glued, its neatly done so hopefully the edges will remain rolled over as the cards are slid in and out, time will tell.
The actual part you put your phone in is like a rubber material. Not hard at all but seems to to an adequate job of retaining the phone, it shouldn't scratch anything and all the ports are easily accessible. I do not like how it makes the volume and power buttons recessed as it makes them a bit difficult to use but not unusable at all, just a bit harder is all.
Drop protection? Honestly, I don't know. I have never used a case like this before as I tend to need rugged ones for my line of work but looking at it, I think it would do good. No obvious weak areas, with that said I'll call it adequate seeing as I am not willing to test it.
Lastly, my wireless charging works fine with this case installed, it also doesn't interfere with my tempered glass screen protector, no issues at all. I would say it's a good quality case that should protect decently and I appreciate the workmanship that went into making it. I have never had a leather case prior to this one so I don't have a whole lot to compare it with, I don't know how it will wear, if it will or really what to expect...time will answer that one.

more pictures
more pictures

couple more

s-pen magnet distortion

Just an update here, I don't know what's triggering it but when using this case I would say probably 40% of the time when I remove it from my pocket and open it, the camera will be running. It wasn't like that the first day or so but it's becoming an issue. I swap cases and problem goes away, I don't wear tight pants or anything so don't know. Anyways, might just be mine doing it for some reason but felt it a significant enough issue to post here.

Ducter said:
Just an update here, I don't know what's triggering it but when using this case I would say probably 40% of the time when I remove it from my pocket and open it, the camera will be running. It wasn't like that the first day or so but it's becoming an issue. I swap cases and problem goes away, I don't wear tight pants or anything so don't know. Anyways, might just be mine doing it for some reason but felt it a significant enough issue to post here.
Click to expand...
Click to collapse
Do you have the "double tap on home to launch camera" enabled? This might be a culprit if it only happens on this case. Perhaps when you pull the device out of your pocket the home button is being pressed.
Also - I submitted a request via that thread about two weeks ago and still heard anything back. Honestly, I am kind of put off that they replied asking for a post and likes and then haven't had the decency to uphold their end of the deal.

palosjr said:
Do you have the "double tap on home to launch camera" enabled? This might be a culprit if it only happens on this case. Perhaps when you pull the device out of your pocket the home button is being pressed.
Also - I submitted a request via that thread about two weeks ago and still heard anything back. Honestly, I am kind of put off that they replied asking for a post and likes and then haven't had the decency to uphold their end of the deal.
Click to expand...
Click to collapse
Good call, I'll check when I get home. Also, I got it by asking via message on Facebook. I replied to that thread then messaged them. If you haven't, give that a try. They seen like a nice enough company.

Ghostek atomic 2.0 Samsung Galaxy S7 edge

Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks

This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?

thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com

I found this one
But would like to hear more, from someone hier
Hier some comments :

vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks

Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.

Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.

s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?

tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app

https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.

s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks

Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app

Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.

Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app

s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?

Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app

Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.

Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.

Hello friends, my question is, is that possible to call someone while using this case?

dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.