[Q] new to cyanogenmod + Titanium Backup + Link2SD - Nexus One Q&A, Help & Troubleshooting

Hey,
I have decided to give CyanogenMod a go for the first time.
I've been rooted for some time now - running a stock Gingerbread 2.3.4 rooted.
I've heard so many good things about CyanogenMod and I have had an itch for a bit of a change, that I decided now is a good time to give it a try.
I was hoping you guys might be able to help me clarify a few things first though.
I have Link2SD installed and setup. I have linked a couple of apps using and I was wondering if anyone knows how it works with Titanium Backup?
What I was hoping to be able to do was:
Code:
1)
Make a back up of some of my apps + their data using Titanium Backup - Some of these apps have been moved using Link2SD
2)
Install ClockworkMod Recovery and make a full nandroid backup.
3)
Make a backup of all the contents on my SD card - from the fat32 partition primarily.
4)
Install CyanongenMod using ROM Manager
5)
Redo the ext2 partition on my SD card and reinstall Link2SD once CyanogenMod has been installed
6)
Reinstall Titanium Backup and restore all the apps I backed up.
I was hoping that by doing the above I could hang onto all the custom settings I have in some of the apps.
For the apps that have been linked using Link2SD, will Titanium backup restore them properly as long as that ext2 partition on the SD card is there?? Or am I going to run into issues?
I have done some searching on these forums but there seems to be no clear cut answer.
Any help or advice would greatly be appreciated!
Thank you

You'll be fine - just make a full Titanium backup and a nandroid (just in case).
Do a full wipe, install CM with gapps, install your apps2sd, then restore your Titanium backup...

Titanium Backup will just restore the apps to the /data partition (or the ext if you have app2sdext enabled), but since link2sd is setting up individual symlinks for each app, those probably won't be carried over when you restore with Titanium Backup. You will have to redo those apps. But this may be time to look into a full app2sdext option. It is much simpler than link2sd and there aren't any noticeable performance hits (unless you do data2sd).

Good catch bass - I missed the Link2SD detail!

@danger-rat @bassmadrigal
Thank you guys for giving me some advice.. it is much appreciated!
So the app2sdext option can be done using dark tremor?
I was looking at dark tremor previously when I was trying to decide what method to use to relink apps.
Do you guys know of a good tutorial to go about setting it up? Is it done pre install of Cyanogen? Or post install?
My other concern about moving apps to the SD card using methods like link2sd and dark tremor is recently I had a situation where my ext2 partitions filesystem actually became corrupted. I ended up having to a 'fsck' on it to repair it ( I am pretty sure I got lucky with that ). Using the app2sdext do I still have the options to decide what I move to my SD card?

You can use Darktremor or S2E as the popular methods. S2E is a bit more intuitive (its an app in the market, with a front end GUI).
Install after you've installed CM.
As far as corrupt cards, just make sure you backup from time to time. Titanium or nandroid should do the trick. The advantage of having an ext partition is that once you have the partition, you can reformat it without losing your regular SD partition...

i would also recommend S2E, recently went from dt to
s2e and its working great.
Sent from my Transformer TF101 using Tapatalk

I remember seeing you mention s2e once before! At the time though I couldn't use it since I wasn't running CyanogenMod
That sounds like a good plan.
What do you think of this
Code:
1)
Do a Titanium Backup of my apps+their data
(including ones that have been moved using link2sd)
2)
When I install CyanogenMod, setup and install s2e
3)
Install Titanium Backup and start recovering my apps.
Since Titanium Backup should restore apps linked via
link2sd back to the default /data directory, I should just
be able to relink them using the s2e method?
I was wondering something else to actually.
@danger-rat you have mentioned in the past that you do not like the most recent version of the ClockworkMod recovery due to stability and reliability issues (I have seen a few other people say this as well). If this is still the case, can you recommend a version to install? From Rom Manager itself, can you choose a different version of ClockworkMod recovery to install?
Sorry for all the questions!
EDIT ------------------------------------------------
Just after I posted this I noticed there is an option in Rom Manager "All ClockworkMod Recoveries" - It looks like this option will allow me to install older version of ClockworkMod?

I use CWM 2.5.1.4 and install via ROM Manager, just as you suggested...

Thank you sir for suggesting a version and confirming I can do it via ROM manager.
Hopefully I can try this in the next couple days. Will report back success/epic failures!
Thank you baseballfanz as well!
Sent from my Nexus One using Tapatalk

Why posting a question in general section???
Thread moved.

hey sorry I wanted to ask one more question...
Since I plan on implementing s2e I will have to reformat my ext2 partition to ext3 or 4 (I think it said ext4..)
My question is, what should I do with my fat32 partition?
After I backup all the data on it, should I reformat it as well? Then after I get CyanogenMod installed, move back only what is important - Titanium backup directory for example? Or copy everything that was on it. There will probably be a lot of useless/old files on there that aren't really useful.
EDIT ---------------------
Sorry Mr.Clown for posting in wrong section.. I'll post correctly next time!

i went from dt a2sd to s2e with no need to redo anything on my sd card. i had ext4 already.
if you use amon ra you can change ext 2 to ext 3 or ext 4.

Sorry, I was gone all day and away from a computer. Glad others chimed in. But to start, S2E and DarkTremor's a2sd both are not selective on which apps are installed to the sdcard. It is an all or nothing approach. That is the difference between app2sdext and link2sd. With S2E, you just install it and open the app. Select the checkboxes to move apps to the sdcard and then I recommend moving the dalvik cache as well (as it takes a lot of space). Reboot, and any apps you install/restore will be automagically put on the sdext partition.
And to answer your last question, if you already have an ext partition on your card, there is no reason to change it. It may say ext 3 or 4 is needed, but I am running ext2 on mine without any issues (I have been too lazy to take the time to change it). Just make sure the ext partition is wiped (which can be done in recovery under Mounts and Storage). The fat32 can be wiped, but it isn't necessary. Although, if it has been awhile, you may want to consider it, just to get rid of some of the stupid folders that devs can't figure out how to keep them out of the root of the card.

@bassmadrigal
thanks for the response man!
All or nothing eh? I will give it a try and hope for the best! At least then I will have more flexibility in the amount of apps that I can have!
I think I will just reformat the entire card since it has been a while. There is so much stuff on the card now I don't really know what is what anymore. I will keep a back up of it though juuuust in case.
I think the ext2 partition might have some files left over from link2sd so I think I might wipe it out as well and start again.
I have since removed all the apps I moved using link2sd just to calm my nerves a little bit (ha!).
I am currently trying to purchase titanium backup but it looks like maybe the market is having issues. It is stuck on "Authorizing purchase..." seems like a few people have had this.
In the mean time I will install the recovery image and do a nandroid backup!

Just as an FYI, if you redo your partitions (ie repartitioning your sdcard through the recovery), that will erase and format both partitions. I think by default, clockworkmod will do an ext2 partition, whereas Amon_RA gives you the option between ext3 and ext4. One thing to keep in mind, in the past, with ClockworkMod v3.x, it had been known to cause issues with partitioning cards. I don't know if that has been fixed in the v5.x, but I know it doesn't exist in v2.x and it also works properly in Amon_RA.
All or nothing really isn't a bad approach. I have a class 4 32GB Sandisk, and I don't seem to have any speed problems. Then, with some of the apps that have a large amount of data, I will move those individually with Titanium Backup. Two big ones are Google Earth (16MB of frickin data), and Firefox (I don't remember how much, but it is still a large amount). But I had to move those because I was running out of room in my internal memory (I have a lot of apps installed).

I was actually just about to update this thread!
I have been busy since my last post!
I have since installed clockworkmod recovery, done my backups, installed cyanogenmod, and am just in the process of going through it.
I FINALLY got titanium backup pro key to install.. I think there must have been something wrong between google and the titanium backup app, but after like 2 hours of trying it finally went through!
I think I am okay with the "All or nothing approach" as well. I know now that I need to start to take backups WAY more serious! So if I ever run into a situation where my ext partition dies, I won't be devastated!
I think what I will end up doing is reformatting it all tomorrow at work. I will turn the phone off, remove SD card, format using a Linux system at work, place card back in and go from there.
To restore my ROM Manager backup and my Titanium Backups I just have to copy those folders back to the SD card (after the format) from the backup I made of the SD card prior to formatting it (sorry if I am sounding repetitive, I can't tell if what I am saying will make sense to anyone other then myself lol + plus I am EXHAUSTED!)
That's awesome though its working for you. I have a class 10 8 gig kingston SDcard and so far its been great!
So when I setup s2e (I have it installed, but not configured!) I should select the check boxes "Applications, Private apps, and Dalvic Cache"?
You mentioned that you use Titanium Backup to move certain apps like Google Earth... I was just wondering in what direction you were moving them? From the phone to the SDcard, or from the SDcard to the phone? Sorry for probably another really stupid question I just wanted to make sure I was following you correctly!
Thank you again for all your help though. Things have gone smoothly so far

In S2E move applications, private apps, dalvik cache and optional too download cache.
As for moving data to sd card individually by Titanium, you are moving the data from internal memory to sd card

Yes, all you need to do is copy those folders back, but if you restore any of your nandroid backups, you will reset everything in your system back to the time before you installed S2E. So, I would only do that as a last resort. But, Titanium Backup does not have that limitation. It is just restoring the data to whatever the system is setup to do.
Once you do get everything up and running properly, it would be beneficial to do a nandroid. But as far as a lot of backups, you can set TB to run on a schedule to back up your phone every so often while you are asleep. And then, I just make sure I do a nandroid before I flash ANYTHING.
And ditto for what baseballfanz said. I never bothered with the download cache, as that is stored on a different partition within the phone (the /cache partition). Unless you resize all your partitions, it is probably pointless to move it. And yes, I am moving the data (ie the saved games/settings etc) for the app to the sdext partition with Titanium Backup, but you probably won't need to do this for a while (I have 213 user apps installed according to TB).

@bassmadrigal and @baseballfanz
Thanks guys for all your advice!
Sorry for the million's of question, I'm learning a lot from you guys though!
So.. Cheers!
Nandroid is similar to Acronis (imaging software) for PC so I definitely follow you when you say that restoring an Nandroid backup will erase anything I have done since doing that particular backup.
Good to know that moving those folders back onto the SDcard is all I have to do so now reformatting the card isn't as scary! Oh and I have to make sure I grab the Titanium Backup License file - Sorry I just read this is the old method!
I will definitely take your advice and produce a Nandroid backup once everything is up and running just in case! I have been thinking about it and I figured I could automate a backup of the Titanium Backup folder and the clockworkmod folder by using the rSync app. I could just copy everything to my NAS during the night, which would ensure I have two physical copies just incase my SD card decides to dead.
thanks for clarifying the direction of the data being moved using titanium backup. I figured it was that but wanted to be sure. I still have a lot of learning to do with that app to get fully familiar with it!
I'll be setting up my two new partition today and hopefully I can start restoring apps later this afternoon. Will report back my status.
Thanks again for the help!
cheers

Related

nandroid only partially backing up/ restoring

Hi all, I did a nandroid restore and it only partially restored my phone content, for example it did restore
- hotkeys
- sms
- wallpaper,
but didn't restore
- contacts
- homescreen setup
- applications (and data).
It worked perfectly well when I tried it, but last time it didn't. Here is what I did:
Installed 6.1 per ClockworkMod without Google Apps and did a nandroid backup as I was asked, booted into 6.1, rebooted, flashed Gapps tiny 201020 something, rebooted, didn't come past "tap the android to begin" (don't know why tapping didn't do anything), so I restored the backup I did prior to installing 6.1 and it restored only what I wrote above.
Any help will be greatly appreciated guys!
Unrelashade said:
but didn't restore
- contacts
- homescreen setup
- applications (and data).
Click to expand...
Click to collapse
1. Contacts get restored from Google.
2. Did you use alternative launcher before (i.e ADW or LP). If so, the only way Nand would restore it, if you still have it on your phone but what you say is that it did not restore any apps which leads me to next point.
2. Did you have your apps on SD card? Did you do Nand+Ext backup or just Nand? Regular Nandroid back-up will not touch your ext partition. If you did just a Nandroid backup and wiped your ext partition - your apps are gone for good.
borodin1 said:
1. Contacts get restored from Google.
2. Did you use alternative launcher before (i.e ADW or LP). If so, the only way Nand would restore it, if you still have it on your phone but what you say is that it did not restore any apps which leads me to next point.
2. Did you have your apps on SD card? Did you do Nand+Ext backup or just Nand? Regular Nandroid back-up will not touch your ext partition. If you did just a Nandroid backup and wiped your ext partition - your apps are gone for good.
Click to expand...
Click to collapse
Thank you for your answer! Yes I had 6.0 before 6.1 with ADW. Nandroid did restore one or two apps, but not all... (just found that out). Yes I had some apps on my sd card but nandroid didn't recover them, neither the others. Just the few I mentioned before, but I had more on my SD and more on my internal flash storage. And no, I had no ext partition of sd card (copied some of them via froyo apps2sd). Also, I didn't remove any of my files from my SD (except for some songs to make more free space).
It seems like Clockwork didn't warn me that I had not enough free space on my SD and the backup had not enough space... However I managed to get the data I needed with this tool from a German forum: http://www.android-hilfe.de/root-ha...6339-nandroid-backup-auslesen.html#post592908
Copy your .img to your computer, open with and choose the unyaffs.exe, works perfectly well
Now I still don't know why I wasn't able to get past the "Getting Started" Android first steps, but I'm going to flash again (this time with everything safely backed up) and see if it works this time.
Glald you figured it out. Hopefully you'll have better luck with it next time around.

[Q] Possibly quick noob question? Help needed! :)

Right now I'm using CM 6.1.1 on my Nexus One. When I flashed CM for the first time I wiped my SD card right after I installed the ROM, so I really don't remember too much about what happened to my apps or anything like that. So, my question is, if I want to install CM 7, can I just wipe my phone with ROM manager right before installing it, and then not wipe my SD card afterwards? Will the apps, pictures, ect., that is on my SD card right now magically appear untouched on CM 7? I guess I'm just not sure how the SD card contents will be affected when flashing ROMs, and I'm not sure if after you flash a new ROM, the ROM can use all of the stuff that's on your SD card just like the ROM you had before did.. Does that kinda make sense? I feel dumb for asking all this. Also, when I save a backup of my ROM, the backup will just be a copy of all of my phone's internal memory and the operating system, right? And when I wipe my phone and install a new ROM, the new ROM just replaces all of my phone's old contents? So if I ever flashed my original ROM again, it'd bring back all of my phone's contents, system memory, operating system, apps installed on the phone, ect?
Thanks for taking the time to read my long, poorly written batch of questions Help would be very very appreciated!
SD card isn't touched when flashing ROMs.
You can restore your backup and it'll be all like it was.
If you use DT A2SD - things start being more complicated.
Yumunum said:
can I just wipe my phone with ROM manager right before installing it, and then not wipe my SD card afterwards?
Click to expand...
Click to collapse
Yes, you can leave your SD contents as is, they won't be touched.
Will the apps, pictures, ect., that is on my SD card right now magically appear untouched on CM 7?
Click to expand...
Click to collapse
Pictures, Music, Videos etc that are stored on the SD card will remain untouched by flashing a new ROM, however apps are a different story. Basically you've got two main types of Apps on SD cards. The first is froyos implementation which is basically used to free up space on the phone memory but will not survive a wipe or flashing a new ROM. The alternative is Dark Tremors A2SD which uses a dedicated partition on your SD card (Created through recovery) to store apps by tricking the system into thinking the folder on your SD card is actually on internal memory. Once a new ROM is installed over the current (Which obviously must use DT A2SD also) these apps should be available again with their settings etc remaining.
I guess I'm just not sure how the SD card contents will be affected when flashing ROMs, and I'm not sure if after you flash a new ROM, the ROM can use all of the stuff that's on your SD card just like the ROM you had before did
Click to expand...
Click to collapse
Again, all data/media remains but apps require A2SD or its variants.
Also, when I save a backup of my ROM, the backup will just be a copy of all of my phone's internal memory and the operating system, right?
Click to expand...
Click to collapse
When you backup/nandroid you take a screenshot of sorts of your system. By default I think most recovery images save the boot, system, data and cache partitions when a backup is being made. Certain recoveries offer to backup other partitions such as sd-ext (Where A2SD stores the apps). Backups are designated by folders with a time stamp, I personally rename these to reflect the contents e.g. MM.v.20 tells me this is MicroMods v.20 of his GB ROM. Obviously yours will differ but I find this keeps things organised. Basically think of nandroid as the Android equivalent of Acronis true image or Norton Ghost for the PC. It lets you create any number of backups which will restore your device to the exact state at the moment of backup.
And when I wipe my phone and install a new ROM, the new ROM just replaces all of my phone's old contents?
Click to expand...
Click to collapse
A newly flashed ROM will basically restore your device to factory settings but on the new ROM. Once you've signed in to your Google account certain settings and content will be automatically downloaded e.g. Calendar appointments, Contacts. Other settings will not be restored e.g. Display brightness, alarms.
So if I ever flashed my original ROM again, it'd bring back all of my phone's contents, system memory, operating system, apps installed on the phone, ect?
Click to expand...
Click to collapse
Nope, again it would return to the factory settings. However you can restore nandroid backups you have made of your original ROM which would return the system exactly to its previous state.
Basically if you're on a stock ROM it won't have A2SD. If you wish to use A2SD from now on then find a ROM which uses it, partition your SD card appropriately (Plenty of guides around) and you'll have minimal problems moving from ROM to ROM. As for Nandroid you'll find that most ROM devs recommend wiping all data from the phone (Not SD card) before flashing their ROM. Otherwise files or settings from other ROMs can cause some undesired effects on your current one.
Good luck and get reading the Nexus wiki, it's very helpful for these types of questions
Note: For some reason I vaguely remember someone noting that Froyos A2SD can be used to move apps to another ROM or at least the base app itself (If not the individual setup/settings) but I can't seem to find any info after a quick Google and it never interested me enough to look into it further. Perhaps someone can clear this up?
Hollow.Droid said:
Note: For some reason I vaguely remember someone noting that Froyos A2SD can be used to move apps to another ROM or at least the base app itself (If not the individual setup/settings)
Click to expand...
Click to collapse
I dont think thats true.. suppose it's formatted during a wipe.. titanium backup serves the purpose like a charm.. (with all the settings for the apps and the resumes for the games)
Sent from my Nexus One
I have a similar question to the OP. I use a 1GB EXT through DT's A2SD. If I wanted to flash a new ROM would the following be my step-checklist?
1 - Nand backup (just in case)
2 - Backup apps with Titanium
3 - wipe system data & cache
4 - flash new rom
5 - restore apps?
I'm just wondering what the procedure is to keep the apps in A2SD on a new flash without re-setting up.
Wiggz said:
I have a similar question to the OP. I use a 1GB EXT through DT's A2SD. If I wanted to flash a new ROM would the following be my step-checklist?
1 - Nand backup (just in case)
2 - Backup apps with Titanium
3 - wipe system data & cache
4 - flash new rom
5 - restore apps?
I'm just wondering what the procedure is to keep the apps in A2SD on a new flash without re-setting up.
Click to expand...
Click to collapse
yeah that would be fine..
btw 1: if you upgrading a cm nightly, you need not wipe system n cache..
2: if you do a titanium backup before, then you can finish all the steps in the recovery in one go..
n I dint quite get what you are asking. but from what I know, apps 2 sd folder (ie android.secure) is erased in a wipe.. that isnt changing
Sent from my Nexus One
shreyas - thanks for your help.
I understand the A2SD (EXT) partition onthe sd will be wiped, but I'm assuming I would have to do nothing to get the new rom to see the ext and use it?
That's really my question. Would recovering my apps from Titanium push them back on the A2SD location or would I need to install A2SD again?
i don't think so..
I suppose that the pro version must support the direct a2sd.. but give it a try.. if it dosent work then you have do manually..
Sent from my Nexus One

[Q] Moving from Nookie Froyo to CM7

I'm planning moving to eMMC CM7 from Nookie Froyo, and want to make sure I have my ducks in a row before committing:
1) I have made Titanium Backups of all my apps to the SD card,
2) I have made a ROM manager backup of the whole system. (just in case I want to bail out)
Anything else to do?
My question is whether I will be able to read the Froyo SD card from CM7 to reinstall the apps? Does the ext4 format extend to the external SD card or just to the internal storage?
Also, does restoring apps via TB restore the settings for those apps as well? For example, will I have to start playing Angry Birds from the beginning again, or will it pick up where I left off (I hate Angry Birds )?
Thanks,
Derek
The format of the SD card does not change.
TB gives you the option of restoring apps with or without their data, such as settings, save-games, etc. It's normally safe to restore app data. Just don't select the option to restore system data. If you encounter problems with any specific apps, you can then use TB to wipe their data back to the default settings, as if you had just installed them.
CM7, along with every other android rom, uses the external SD-card as storage and storage alone. I actualy went from nookie froyo to CM7 and used titanium backup to reinstall all of my apps. There were however, a couple apps that would for some reason not install. I don't remember which ones, so don't be surprised. EXT-4 only applies to the eMMC (or internal rom), and will only apply once you format /system /data /cache within CWM 3.0.1.0
As far as I know as long as you select to backup the app + data , then restore apps + data Titanium backup will restore the exit state of the apps.
Hope you like and have fun with CM7.
The NEWness (updateing it at least once a week) and ruff around the edges implementation sort of gives it a charm.

Move from one Milestone to another (different ROM & SD-Card)

So, I finally have got my hands on another Milestone which means that I can play around with different ROMs as much as I like and still be able to be sure that people can call me on my stable phone. But, installing ~20 apps by hand and restore of messages every time is a pain in the as and therefore I would like to simply make a backup on the SD card and apply all the apps.
I thought that I could simply make a backup via Titanium Backup to SD-Card 1, copy that content to SD-Card 2, install TB on my other Milestone (which uses SD-Card 2) and just restore that way as you do every time you install a new ROM but no, TB can't find anything to restore.
Any thoughts how I should do?
*Milestone 1 uses CM 7.1.5 and Milestone 2 uses CM 9 4.0.4
TB allows you to change to change the directory on the SD card it uses for backups. Make sure it's looking in right one on the 2nd Milestone.
Dave Lister said:
TB allows you to change to change the directory on the SD card it uses for backups. Make sure it's looking in right one on the 2nd Milestone.
Click to expand...
Click to collapse
Thx man, turned out the folder with the backup was inside the TB folder (sd/TitaniumBackup/TitaniumBackup/"all backup files").
Well, TB manages to restore some of the apps but not all of em...hmmm...
Think I'm going for installing all the apps by hand insted, takes longer but at least works. Hehe.
As my understanding is with app2ext (default with Kabaldan's CM ROMs) to install all apps you need only copy them from MM1's ext into MM2's ext. During restart all apps should get installed. Obviously its just apps no data, but here the TB may help...
One command, if moving from one ROM to an other do not copy the lib dir from the ext partition.

Re-flashing a ROM Question

I just have a quick question. I have a Samsung Galaxy Exhibit T599n and running Beanstalk 4.4+ rom. I am having a few issues with the rom after a few month, such as random reboots, issues with PC connection (Phone only runs in Charge only mode, and phone does not pop up the option to use charge only, camera, or media mass storage modes when I connect to PC) and also no longer connects to Kies.
My question is, if I re-flash the SAME version of the rom that I have installed (I have the most recent version) over the current version I have installed, will I lose my apps and settings? Just want to know what to prepare for if I reflash. Should I do that and get to keep my apps and settings? Or is a factory reset necessary to fix my errors?
Do a factory reset that should do it .. if not it might be hardware problem.
EDIT: You can use Titanium Backup if you have root acess to backup all your apps.
steff00 said:
Do a factory reset that should do it .. if not it might be hardware problem.
EDIT: You can use Titanium Backup if you have root acess to backup all your apps.
Click to expand...
Click to collapse
Excellent, thank you.
One other question, I had a problem with this last time I did a factory reset. I have my SD card partitioned to install my apps on there (Phone only came with 1GB internal, and would only hold a couple apps) so my SD card is 32GB, with 8GB partitioned to install my apps on. I remember having trouble with them last time I tried to flash a new rom and ended up having to reinstall Beanstalk from scratch and completely wipe the app partition as well.
Ok soo if i understood , you rom that you gona flash on your 32 gb sd card and flash from that also you can get app link2sd i think its called which let you transfer apps to sd card, correct me if i am wrong.
Code:
I already have it set up that way. I have the rom installed, I have the 2nd partition on my SD card, and have the apps linked to it with Link2SD. But, I last time I tried backing up roms that were installed on that partition, I have a bounty of issues. When I went to reinstall the apps, the files were still on that 2nd partition, there were dormant files left over everywhere, so when I'd try to restore the apps from backup, I got a plethora of errors and the rom began crashing. Just wondering if there's any way to backup and use roms that are installed on that 2nd partition using Link2SD?
partyboynx2 said:
I already have it set up that way. I have the rom installed, I have the 2nd partition on my SD card, and have the apps linked to it with Link2SD. But, I last time I tried backing up roms that were installed on that partition, I have a bounty of issues. When I went to reinstall the apps, the files were still on that 2nd partition, there were dormant files left over everywhere, so when I'd try to restore the apps from backup, I got a plethora of errors and the rom began crashing. Just wondering if there's any way to backup and use roms that are installed on that 2nd partition using Link2SD?
Click to expand...
Click to collapse
I see, well since you have only 1 gb of internal storage for use i dont think i can help you with that.. because backup itself take a lot of space and not sure if you can make it to backup on your 2nd partition.
Or you can try transfer your backup files to your PC/laptop and delete everything then ty doing it and transfer back to phone after.

Categories

Resources