Related
Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?
Is there maby any way to get 2e recovery mode without usb connection?
Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[
Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?
i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.
Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje
Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.
Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.
Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?
Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !
Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?
I have a problem... my galaxy s doesn boot up...wheni try to go into recovery it doesn t work... so i tried to go into download mode and it works... the only solution woould be to flash a new ROM via Odin but i have a problem... when i connect the phone via USB my computer doesn t recognizes the phone (i tried on several) so what can be the problem...?
ps: i tried to close the antivirus but the problem persists...
PLS help!
reinstall kies and all samsung drivers then try it
huzi7868 said:
reinstall kies and all samsung drivers then try it
Click to expand...
Click to collapse
hey man i did this on 3 different computers... trust me...
Try changing the USB cable.
Sent from my GT-I9000 using Tapatalk
Bro ha very short time ago had the same problem when I tried to install a ROM via Odin, the solution was to send the mobile phone for warranty.I tried a jig and nothing my mobile was dead. So i think this is only solution. Sorry about you
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now
lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.
eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!
use the update service
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!
how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel
Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.
X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D
Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum
I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA
eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped
I think i bricked my galaxy mini. when i bought it,i had 2.2.1 on it.unfortunately i did not update it step by step,i mean i updated it to 2.3.5,and didn't update it to 2.3.4 at first.now the screen turns on and off,i can not get in to cwm,or downloading mode,and my pc and odin don't detect it.is there any way except taking it to service center?
johnypersian said:
I think i bricked my galaxy mini. when i bought it,i had 2.2.1 on it.unfortunately i did not update it step by step,i mean i updated it to 2.3.5,and didn't update it to 2.3.4 at first.now the screen turns on and off,i can not get in to cwm,or downloading mode,and my pc and odin don't detect it.is there any way except taking it to service center?
Click to expand...
Click to collapse
Hey..what do u mean by screen turns off and on ? Are u talkin about a boot loop ?
Did u install kies in pc?
Check wether ur usb cable and port are working or not..
freakyfriday said:
Hey..what do u mean by screen turns off and on ? Are u talkin about a boot loop ?
Did u install kies in pc?
Check wether ur usb cable and port are working or not..
Click to expand...
Click to collapse
no it's not a boot loop,phone wants to turn on,the screen goes white but after a few seconds phone turns off! i installed kies,odin,android pc suite,but the pc does not detect the phone(i think there is no enough time for pc to detect it).and yes usb cable and port works,as i connect my motorola photon using it.
johnypersian said:
I think i bricked my galaxy mini. when i bought it,i had 2.2.1 on it.unfortunately i did not update it step by step,i mean i updated it to 2.3.5,and didn't update it to 2.3.4 at first.now the screen turns on and off,i can not get in to cwm,or downloading mode,and my pc and odin don't detect it.is there any way except taking it to service center?
Click to expand...
Click to collapse
How did you update your mini?Through KIES or CWM?
johnypersian said:
no it's not a boot loop,phone wants to turn on,the screen goes white but after a few seconds phone turns off! i installed kies,odin,android pc suite,but the pc does not detect the phone(i think there is no enough time for pc to detect it).and yes usb cable and port works,as i connect my motorola photon using it.
Click to expand...
Click to collapse
Sorry mate..its a brick. Samsung centre is the only answer
Try to put phone in download mode through adb !
R.A.G.E said:
How did you update your mini?Through KIES or CWM?
Click to expand...
Click to collapse
using odin.
Sorry mate..its a brick. Samsung centre is the only answer
Click to expand...
Click to collapse
i hope so.thanks for attention ,and you're time.i don't know why i didn't see any warning which says i have to update to 2.3.4 before updating to 2.3.5
Try to put phone in download mode through adb !
Click to expand...
Click to collapse
thanks.is it possible when pc does not recognise it?
Just bring it to the center they will not know that you flashed a single thing but never mention about flashing because your warranty will be void
johnypersian said:
I think i bricked my galaxy mini. when i bought it,i had 2.2.1 on it.unfortunately i did not update it step by step,i mean i updated it to 2.3.5,and didn't update it to 2.3.4 at first.now the screen turns on and off,i can not get in to cwm,or downloading mode,and my pc and odin don't detect it.is there any way except taking it to service center?
Click to expand...
Click to collapse
use usb jig.. it will help definetily help you to go into donwload mode,,, as you are saying screen is turning off and on.. see on ebay.com usb jig,,
HIT THANKS IF I HELPED YOU ...
If you can still get into download mode, then ODIN should be able to detect your phone and thus you should be able to flash again.
Good luck.
johnypersian said:
using odin.
i hope so.thanks for attention ,and you're time.i don't know why i didn't see any warning which says i have to update to 2.3.4 before updating to 2.3.5
thanks.is it possible when pc does not recognise it?
Click to expand...
Click to collapse
Yup adb is the way .. I dont know much about it but you can google it
Adb recognises the device !!
Try ASAP
avilove4u said:
Yup adb is the way .. I dont know much about it but you can google it
Adb recognises the device !!
Try ASAP
Click to expand...
Click to collapse
i think it is not possible to use it as pc does not recognise phone!
If you can still get into download mode, then ODIN should be able to detect your phone and thus you should be able to flash again.
Good luck.
Click to expand...
Click to collapse
as i mentioned before,no i can not get to download mode,and about usb jig,i think it is the way,but in my country i can not buy from ebay. i think this video can help people with bricked galaxy mini
johnypersian said:
i think it is not possible to use it as pc does not recognise phone!
as i mentioned before,no i can not get to download mode,and about usb jig,i think it is the way,but in my country i can not buy from ebay. i think this video can help people with bricked galaxy mini
Click to expand...
Click to collapse
have u googled ??
avilove4u said:
have u googled ??
Click to expand...
Click to collapse
no,i use it for my motorola photon but now,galaxy is turned on only for afew seconds! so there is no time for using adb,and sure it does not work.i think jig cable is the solutuion
johnypersian said:
no,i use it for my motorola photon but now,galaxy is turned on only for afew seconds! so there is no time for using adb,and sure it does not work.i think jig cable is the solutuion
Click to expand...
Click to collapse
may be
Same problem ..
i was Rom Manger And Got Bricked
The phone Almost Dead .. Can`t get into Download mode or any Thing
and My Computer Can`t Detect it .. So i can`t Use Odin
any Other Solution ??!
Ur screen flicker???!when turn on
Sent from my GT-S5570 using XDA
I encountered this kind of sh**. I bricked my SGM and lasted for a year. We went to Samsung Service Center and they said that they will fix it and we're going to pay P6,000 ($140) and we're shocked. I did not left my phone to SCC and instead, my Mom brought my phone to her friend. After 5 days, it's fixed.
Jig Usb will work over here....
It will help u 2 boot in download mode...
Aftr dat flash the STOCK FROYO 2.2.1 NOT GB ... PLZZ ONLY STOCK FROYO let it be of any region...
Ur phone will start.. aftr dat flash 2.3.6
Thn go on wit any othr custom rom...
DNT FLASH DIRECTLY 2.3.6
Sent from my GT-S5570 using XDA
johnypersian said:
i think it is not possible to use it as pc does not recognise phone!
as i mentioned before,no i can not get to download mode,and about usb jig,i think it is the way,but in my country i can not buy from ebay. i think this video can help people with bricked galaxy mini
Click to expand...
Click to collapse
U can make your own usb JIg at home,, check this video
http://www.youtube.com/watch?v=jKRrTZayRxU
HIT LIKE IF HELPED U
When i connected my mi410 to my lattop, the notification keep showing 'usb device not recognize'.
But, if i connected other set of mi410, the problem doesn't occured.
is it something happened to my phone?
is there any one could help?
P/S: i've already installed the correct usb driver on my lattop and it could recognize mi300 & other mi410.
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
install SUT LR flashing tool.It have USB drivers of our phone packaged with the software.It will help you .
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
ezio2 said:
tell me which are the roms you are using on each of your device ( on other mi410 too ) ???
also which OS on your laptop ????
don't forget to Hit Thanks bro
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3). the other 2 set i tried is on Sharp Rom & also Edowar CM7
My lattop is running Windows 7 Ultimate.
vivekb said:
dude please uninstall drivers ... restart lappy and install again .... check if this work ...
also if possible provide more details like are you on stock ROM or any custom ...which OS is with your lappy and anything more if you want to share
Click to expand...
Click to collapse
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Eric1665 said:
my mi410 is on Edowar CM7 latest update (27/3).
My lattop is running Windows 7 Ultimate.
i've already tried to unistall the drivers & reinstall for couple times. still same, and ONLY my device was not recognize.
Click to expand...
Click to collapse
seems to be a hardware problem with your cell maybe :cyclops:
ezio2 said:
seems to be a hardware problem with your cell maybe :cyclops:
Click to expand...
Click to collapse
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Eric1665 said:
what the.......argh..
is there anyway to solve it or flash back to stock rom?
Click to expand...
Click to collapse
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
ezio2 said:
You can always use SUT LR 1.8.2 to flashback stock rom...
JUst put cell in Download mode using Vol UP + Power
open SUT from programs list
connect using usb cable ( while in Download Mode )
if it recognizes the phone Use Erase all User Data option
Hit Next button and wait for process to finish
it will take around 2 minutes..
Then you ll be on Stock os..
Hope i have helped you .. Don't forget to HIt Thanks
Click to expand...
Click to collapse
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Eric1665 said:
i've tried it for times. it doesnt work
the device is still not recognize.
i think i have to send it to the service centre..
Click to expand...
Click to collapse
Problem with your Windows / SUT installation...go to device manager and delete all device relevant USB controllers and other devices showing anything as "Qualcomm".
Uninstall SUT.
Restart windows, connect device and let it install the drivers first. Install SUT, install should go through without any issues and without prompting any error messages, in other words it should be complete uninterrupted install. Connect device and check if you see "a phone is connected"
Try with SUT 1.7 version also. Let us know if you still have any problems