Related
I'll do a more detailed review tonight and switch out the photos with better ones too.
First impressions: Holy crap this is huge!
It is very reminiscent of the commuter series for the HTC Hero (of course). However, this one feels a bit more "rugged".
The case has the standard plugs for the headphones and microusb ports. It also has the raised areas for the volume rocker and on/off button. The front is well protected and thick enough to not really have to worry about placing the phone face down.
It was much easier to attach than the Sedio Innocase! And conversely, it's a PAIN to remove (which is a good thing!)
It takes about the same amount of force to slide open the keyboard. It's borderline too hard for me.
Oh, the keyboard lights aren't completely covered either! Granted you still can't see them looking directly down at the phone, you can see them if you tilt the phone back a little.
My initial qualms are:
1) The case is slightly too long for the phone. The top of the case that is around the keyboard is loose. Not just a little, but it looks like it wasn't even meant for this phone.
2) Like the mini-usb plug on the Hero's commuter series, the micro-usb plug on the Shift's commuter series doesn't want to stay in.
3) Since the back side is beveled and it's semi-hard to slide out, it sometimes takes a couple tries because it keeps slipping out of my hands.
Nit-picks:
1) Backside cover is off-center (flash/camera/speaker aren't centered in their respective cutouts)
2) No silicone on the front so when it's face down it slides around easily (compared to the hero which had silicone bumpers on the front)
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Rooster85 said:
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
Click to expand...
Click to collapse
Otterbox.com EVO Shift 4G Commuter Series
southernstyle said:
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Click to expand...
Click to collapse
It's does a very good job of covering up the phone and not being loose.
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
got mine in today, very pleased. although it was a little bit of a b*^&h to put on. After getting it on I noticed the usb plug being a pain, and the power button seems to need a lil extra force to actually click, but other than that love it. I feel safe now
Good review, disappointed, love my Otterbox's for my EVO and HD2. The split covers though, Shift and Tilt (from experience), just do not seem to provide the same kind of coverage but I do not know what else they could do to make them better.
nativ73 said:
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
Click to expand...
Click to collapse
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Rooster85 said:
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
kbrn said:
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
Click to expand...
Click to collapse
Oh well, too late. The microusb doesn't need to be covered really anyways
Sent from my MiuiSpeedy
I just always wiggle the flap into the port, best case by far would definately recomend. ORDER FROM OTTERBOXS WEBSITE, when it first came out I tried it from amazon (it was $10 less) but the expected shipping date was in june.
No I'm not using Tapatalk... I'm using the XDA Premium app, cause I got balls.
Be careful with the otterbox guys, dropped mine for the first time today and 3 of the 4 clips to hold the back on broke, making the case absolutely useless..... waste of 30 bucks!
Sent from my MiuiSpeedy
When. That happens call otterbox and they will no auestions asked replace it usually takes 1week shipping I've had 5 so fardo this and most recently they sent me 2x so I don't need to calll next timeill. Be prepared...love this company
Sent from my PG06100 using xda premium
+1 to that . They have like you said Replaced mine about 4x's. Never once asked for anything but my address. Best company ever . Have since bought Otter Boxes for all my Devices.
I got this case mid August, and about a week ago, I dropped it. While in free fall, the top of the case just fell off my phone and broke in half. Sad thing is, I dropped it from about 2 feet. But yes, I called it in, and they are sending me in another, just have to watch out for my phone a bit more! (At least I get to replace the screen protector, put it on kinda bad, XP
http://www.otterbox.com/DROID-3-by-..._color=20&start=1&cgid=motorola-droid-3-cases
It's been out for weeks
My apologies, I meant out as available to order directly from otterbox.com.
The product was previously shown as "Coming Soon" from their site.
Just got my confirmation email from Otterbox last night 8)
Wonder if it will be too bulky for an already semi bulky phone?
somemadcaaant said:
Just got my confirmation email from Otterbox last night 8)
Wonder if it will be too bulky for an already semi bulky phone?
Click to expand...
Click to collapse
Does it work with the car or media dock?
Sorry mate not sure, i wont get the dock, car mount or otterbox case untill a reliable source in Aus gets these for me which will be months away.
The Dock has a removable base that the phone sits in so I would probably think it should fit, I remember some1 else having some snap on cover for the D3 which worked in the Media Dock. Not sure about the car dock tho.
-smc
Does anybody know if the OtterBox can be used with the extended battery? Also, does it make the phone REALLY bulky? How's the top row of the keyboard?
I was expecting chunkier, but I think I'd still rather use my phone "naked"
mmcgee91 said:
Does anybody know if the OtterBox can be used with the extended battery? Also, does it make the phone REALLY bulky? How's the top row of the keyboard?
Click to expand...
Click to collapse
i have the extended battery as well as the otterbox case. both work well. i got tge case pretty cheap on amazon.
jesusishere said:
i have the extended battery as well as the otterbox case. both work well. i got tge case pretty cheap on amazon.
Click to expand...
Click to collapse
You got it to fit with the extended battery? I received my Otterbox earlier today and I can't seem to get it.
Just got the Otterbox today and I can confirm it does fit with an extended battery. However the battery, which also came today, is a cheapo 2200mAh from amazon. It a bit bigger than the standard not sure if its the same size as the extended. I use it with the standard back and is not bulging out. Hopefully this is an extended and not labeled incorrectly.
[edit] This battery is not getting hot while charging. Its 77 and the standard it usually over 100. Though it may be misreported.
Let me know how the battery does compared to the stock! Mainly if its lasting longer than it or if the cheap batttery isn't worth the money.
Sent from my DROID3 using Tapatalk
geigerm said:
Let me know how the battery does compared to the stock! Mainly if its lasting longer than it or if the cheap batttery isn't worth the money.
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Well the battery's not likely 2200mAh. It gets about the same life as the stock 1500. Still worth the 5 bucks I paid. It's GTMax brand if anyone's interested.
I'm kind of mad I bought the shell/holster they offered, thing's great. But, this looks badass, lol.
wootizzle said:
I'm kind of mad I bought the shell/holster they offered, thing's great. But, this looks badass, lol.
Click to expand...
Click to collapse
The vzw holster is crap as far as i'm concerned. When I got a replacement for a vibrate motor problem I noticed how the new one was much more sturdy when sliding out the keyboard. The case caused it to come loose. The clip near the back of the front camera is too tall and the screen pulled upwards.
Decided to take off the battery cover and see how it fits in the Otterbox. There's no problems it even feels a bit smaller almost as though there's no case on the back. Even tried dropping it from about a foot to see if the battery or sim or sdcard would fall out, didn't move at all. So there should be no problem with an extended battery. Someone at androidforums cut the battery cover to make the extended battery fit. Doesn't sound like a very good idea but I guess it's another option.
Hmm. I have no issues with the vzw one *knock on wood* and its on my hip all day. I have bumped into a few doors at work directly on it (as well as some stupid people in the metro) its held its ground so far.
eww245 said:
The vzw holster is crap as far as i'm concerned. When I got a replacement for a vibrate motor problem I noticed how the new one was much more sturdy when sliding out the keyboard. The case caused it to come loose. The clip near the back of the front camera is too tall and the screen pulled upwards.
Decided to take off the battery cover and see how it fits in the Otterbox. There's no problems it even feels a bit smaller almost as though there's no case on the back. Even tried dropping it from about a foot to see if the battery or sim or sdcard would fall out, didn't move at all. So there should be no problem with an extended battery. Someone at androidforums cut the battery cover to make the extended battery fit. Doesn't sound like a very good idea but I guess it's another option.
Click to expand...
Click to collapse
Sent from my DROID3 using XDA App
Nice. Just wish they had it in
The OtterBox case can be found on amazon for around $25 shipped, it's well worth it. Best case I ever had for a phone. I got it to work with the Motorola extended battery, I just modified the stock battery cover with a dremel and alot of patience.
How much was actually 'shaved'? Did it go through the cover all the way and expose the insides at all?
afturburn said:
How much was actually 'shaved'? Did it go through the cover all the way and expose the insides at all?
Click to expand...
Click to collapse
Oh yeah almost the whole battery is exposed, but the inside of the otter box is silicon and it seal everything up and holds it tight. The original battery cover sacrificed his life so that I could use my extended battery. I still have the extended battery cover if I ever choose to take off the ottterbox. There's a thread at droidforums.net that I posted pics and all in.
Just a word of warning. I was seeing my battery at 120F whenever I was multitasking, like uploading stuff to dropbox & streaming music, which shouldn't be that intensive, it was making me crazy. Finally popped off the case, no more heat, I never see it over 100F anymore.
I do not know the model or anything, the turd at verizon unboxed it and discarded the box. It's the silicone one with some sort of reinforcement built into it. It cost like 20 dollars, and they won't take it back now without the box. Jerks.
So... just worth mentioning. Wouldn't have them throw in the case, if I were you. I'm off to search for a very thin silicone one, or something like that.
EDIT:
This case:
http://www.motorola.com/Consumers/U...n-for-DROID4-by-MOTOROLA-from-PURE-GEAR-US-EN
I would avoid that. At least it gave me issues.
punkonjunk said:
Just a word of warning. I was seeing my battery at 120F whenever I was multitasking, like uploading stuff to dropbox & streaming music, which shouldn't be that intensive, it was making me crazy. Finally popped off the case, no more heat, I never see it over 100F anymore.
I do not know the model or anything, the turd at verizon unboxed it and discarded the box. It's the silicone one with some sort of reinforcement built into it. It cost like 20 dollars, and they won't take it back now without the box. Jerks.
So... just worth mentioning. Wouldn't have them throw in the case, if I were you. I'm off to search for a very thin silicone one, or something like that.
EDIT:
This case:
I would avoid that. At least it gave me issues.
Click to expand...
Click to collapse
Was your phone plugged into your charger while doing these tasks?
I have found that when my phone is fully charged, and I am doing a lot of tasks on the phone while it is plugged in, my phone gets really hot. I think it has to do with the charger doing small charge pulses to keep the battery at maximum capacity. I have the otterbox case which sounds very familiar to yours (inner silicon mold with an outer plastic shell), and when I am using the phone hard, I do not get these problems when disconnected from the power outlet.
I could imagine as a little dyi fix, you could cut slits into the silicon so that you still get most of the reinforcement and protection, but now it has a little bit of breathing room. (like a heatsink, but inefficient).
If you are just going to throw the case away, this is an interesting option.
Did you ever find something thin and silicone? I have the pure gear, my phone gets hot and its way too sticky in my pocket.
I think it'd be really interesting to see if the slits would work.. Is anyone willing to try it and post their results? I have the case too.
Sent from my DROID4 using xda premium
I have a hard plastic case that i got off Verizon and it also get's super hot on and off the charger, but the official verizon kickstand case http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=50277 doesn't really heat up. The verizon case is way thinner and covers less of the phone, so maybe some holes will help.
My droid 4 gets up to 135°+ when I'm tethering. just don't let it get too high, there's a point where the battery won't charge unless its under a certain temperature
Look at this, Ultra slim TPU Case, Helps to cool down
Yooboo26 said:
Look at this, Ultra slim TPU Case, Helps to cool down
Click to expand...
Click to collapse
Anyone got one of these? Are they actually hard or that soft rubber?
I have the verizon kickstand case and my phone only hits around 117ish. I dont like going over 120 so i have warnings to let me know when it hits 117. I think the vzw kickstand case helps the temp when the kickstand is being used since it opens 3 large holes in the back.
Hope this helps
Sent from my DROID4 using xda app-developers app
maddeath said:
I have a hard plastic case that i got off Verizon and it also get's super hot on and off the charger, but the official verizon kickstand case http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=50277 doesn't really heat up. The verizon case is way thinner and covers less of the phone, so maybe some holes will help.
Click to expand...
Click to collapse
shadownekos said:
I have the verizon kickstand case and my phone only hits around 117ish. I dont like going over 120 so i have warnings to let me know when it hits 117. I think the vzw kickstand case helps the temp when the kickstand is being used since it opens 3 large holes in the back.
Hope this helps
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
I too have the kickstand case. I use my droid for everything, from driving directions in my car using the car mount while listening to slacker radio, to checking emails and facebook while away from my PC. My temperature has hit 130 degrees F. I use a temp monitor to keep an eye on my internal and battery temp. I also point my A/C vent in my car towards my phone to keep it cool during the summer months. Lastly, when using it away from car, as in to tether, i remove my case and slide the keyboard up to keep the most surface area exposed to keep the phone as cool as possible. I use FoxFi to tether my Xbox, PS3, PC, and Asus Transformer 101 all at once.
After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.
iamsupreme said:
After trying several cases for my Nexus 7, knowing there aren't any specifically for the Nexus 7 at any retail stores, this was the best one I've come across. It will hold me over until an official case comes out (I've kept the receipt so I can return it). I just can't have such an awesome piece of tech sitting around without a case and without the ability to use it as a stand for viewing. The leather is genuine and the case is simply gorgeous. I love the way if holds the tablet without the clamps/rubberized holding mechanism actually rubbing or touching the bezel. All ports are accessible while it is in the case and the power/volume buttons are very easily accessible.
Found it at Fry's this morning on the way to work but it will set you back $59.99. One of the best portfolio stand cases I've ever owned for any of my devices. High end.
http://www.frys.com/product/7190052?site=sr:SEARCH:MAIN_RSLT_PG
Here are some pictures I just took of it from various angles.
Click to expand...
Click to collapse
Nice! Any negatives that you can tell aside from price?
brianbrain said:
Nice! Any negatives that you can tell aside from price?
Click to expand...
Click to collapse
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.
This case looks really nice. I personally want a colored case though and not the standard brown/black. Also, I'd rather pay a bit more for a case that I really like and thats going to last me a while then buy a cheap case that I'm not that into, deciding that Im not satisfied with it and having to buy more. So if I see something that I fall in love with then I don't mind pulling the trigger as long as its not 100+
iamsupreme said:
None, which is hard to say about most cases. I've always had something I've disliked about a case but have dealt with it. I've also always went for the cheaper the better in the past. This case is truly a "you get what you pay for" case. The way it holds the very edges of the tablet is my favorite part. It looks like it is floating in the case and the parts that hold the tablet in place never really become part of the view. The access to all buttons and inputs as well as the quality of the leather are great. The actual stand aspect allows for infinite viewing angles and never feels cheap, like the stand portion is going to collapse at any moment.
Click to expand...
Click to collapse
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.
brianbrain said:
Nice. It fits perfectly? Usually cases with the plastic clips are pretty picky about what they'll work with. If so, I'm thinking about buying one of these gtab 2 7.0 cases and adding a "smart cover" magnet to it.
Click to expand...
Click to collapse
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!
are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged
iamsupreme said:
Here's how well it fits Very securely! I'm actually shaking the case while I hold it upside down. Talk about making your heart jump a bit!
Click to expand...
Click to collapse
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:
darthchilli said:
are you sure? I tried the same case and it doesn't fit too well, but its the best one
the corners are still lodged
Click to expand...
Click to collapse
I just pulled the edges on the 4 rubber ends out slightly, if that makes sense, and when the tablet was in place, they wrapped perfectly around each corner of the tablet. It takes a tiny bit of "fitting", but once it's on, it's all good.
brianbrain said:
haha, very nice. I may have to see how some of the gtab 2 7.0 cases fit myself. Nice to see you also brought your new baby to work with you today :good:
Click to expand...
Click to collapse
I had to bring it to work! It definitely is my new baby. Tethered 4G connection from my Galaxy Nexus Streaming music while getting my work on.
Sexy! The case too!
Thanks for sharing, that case looks made to order on the Nexus 7. :good:
How about the speaker in the back, is it covered or are there holes for it?
There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app
iamsupreme said:
There are no holes for the speaker. I did a test at max volume and I have no idea why but it sounds louder with it in the case then out of the case. It could be the way it's configured with the speaker near flush but with a decimeter or so gap. I know with my phones and tablets that they tend to sound louder when they are angled near a wall and I seem to get the same effect with this case.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
A decimeter is 10 centimeters...
mewantnexus7 said:
A decimeter is 10 centimeters...
Click to expand...
Click to collapse
Okay. My point is that it's less than a centimeter. Maybe a millimeter or so. Enough tiny space to actually amplify the sound
Sent from my Nexus 7 using xda app-developers app
rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.
qpqpqp said:
rediculous price! that's 25% of the tablet. I've seen much better looking case off amazon.
Click to expand...
Click to collapse
Link? Cause I haven't seen any. All those cheap amazon cases look cheap and tacky IMO.
http://www.amazon.com/gp/aw/d/B0083...4&linkCode=as4&ref_=as_li_ss_til&tag=noref-20
i bought this elcheapo case for now, at least they have 2 day prime shipping
This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.
masterofmayhem said:
This case is very similar to the one you bought, but is significantly cheaper.
http://www.yourpoetic.com/p/157/hardback-samsung-galaxy-black
The company has a case specifically for the N7, but no pictures of the N7 in a case. I'm guessing their N7 is waiting to be delivered too. Haha. Anyway, I really like the floating look, and will probably be getting this one.
Click to expand...
Click to collapse
People on other threads have been linking to Cases listed on Amazon and Ebay with that very similar look (they probably all use the same stock photos) with prices ranging from $10 to $20. Even cheaper.
http://www.amazon.com/MoKo-Slim-fit...?s=electronics&ie=UTF8&qid=1342489646&sr=1-12
http://www.amazon.com/i-Blason-Google-Tablet-Leather-Orange/dp/B008H3PAP2/ref=reg_hu-rd_add_1_dp
http://www.amazon.com/Poetic-HardBa...turer/dp/B008IEGS9W/ref=sr_1_24?s=electronics
I don't know, may be not the same quality but it's hard to judge from photos, or even the prizes.
Only way to judge is hand-on experience like the OP's case, his case looks good also because when the back holds on to four corners only, whereas these ones are a bit 'uneven' (when viewed in portrait mode) : p
I would perfer something that holds on to the edges of Nexus 7 only, like the Official Case or this:
http://www.amazon.com/MoKo-Folding-...ction/dp/B007SA0F7S/ref=sr_1_22?s=electronics
Guys, I'm going to be launching a wireless charging phone sleeve on Kickstarter (Novelsys ampere) in January for the Nexus 6. The unique selling point will be the Smart app that communicates with the sleeve.
I'm doing research for the launch now to determine what features to incorporate in this app:
Display estimated battery life in hrs of phone and ampere
Control when charging starts
find your phone or ampere when one is missing
notifications to recharge at time or location
What other features would you like to see? I've recently posted in the S5 and Nexus 5 forums too, and I've been told not to dilute the product, which I agree with heartily. These are the features I've narrowed it down to. What other things do you think we need to bake in? It will probably be open to developers post-Kickstarter.
I myself use a Nexus 4 with Qi built in but I haven't found a satisfactory wireless charging solution yet... that's kinda why I worked on my own.
See more about the product: http://kickstarter.novelsys.co
Just subscribed on your website
Okay so this is meant to protect the phone and charge it at the same time? Im assuming there is a battery inside the case as well as a qi transmitter?
That's right. Paired with an app. And higher build quality than from your typical Qi charger. What do you think about the idea?
Subscribed as well...if you need a beta tester let me know.
Sent from my Nexus 5 using XDA Free mobile app
Looks excellent, but you need to figure out a solution to why sleeves suck, they either have no top and don't hold the phone well or are too tight.
As long as it comes in black so I can keep it on with my uniform!
I'll beta if I need to as well!
Would you like my wallet now, or later?
Seriously, I hope this will be as good as it sounds.
Yes its black, and the internal colour has been changed from orange to grey so its more suitable for corporate environments!
That's an interesting perspective on sleeves. Yes will take that into account when testing.
aiight, im jumping on the bandwagon too. :fingers-crossed:
just subb'ed and am following you cats on instagram...
I think I'm getting a QI enabled power bank for Christmas..... But a sleeve makes much more sense! I think its a great idea. Definitely more secure and will keep the QI aligned to ensure it stays charging.
Any info about the mah of the sleeve for the Nexus 6. Would need to be enough to charge the device at least twice in my opinion.
What about a using magnets to help secure the phone inside the sleeve instead of just tension?
Sent from my Nexus 6 using XDA Premium HD
honestly seems like a pretty good idea, the potential problems I see for this are targeting the correct consumer base. The phone is already big, this will make it huge, therefore its not going in anyones pocket. So, who carries phones around not in a pocket? People that have other places to put them, who has other places to put them?
1. Women (in their purse)
2. Older executives in a briefcase maybe?
3. College kids who might carry a backpack?
I may be wrong, but as much as I would like something like this, its just too inconvenient not to have my phone in my pocket. There's still some clip phone people out there, maybe adding a clip would help? Just my 2 cents, love the idea, just concerned its not being designed for the right demographic aesthetically.
The problem for me as others have mentioned is the bulkiness of the sleeve. When you add in the 3,000mah battery (assuming it would at least be this size) and coils for qi charging it's going to pretty thick. I'm Ok with that because this would be on my visor in my work truck, but wouldn't go great in pocket.
if you are taking the no idea is a bad idea approach, what if you incorporated this into a car mount with the display revealed, so every day I got into my car I could slide it in, and it would charge, then I could slide it out and take it with me, or if I KNEW i was going to need extra battery, I could detach the whole thing and clip it to a belt or throw it in a pack?
ejkeebler said:
if you are taking the no idea is a bad idea approach, what if you incorporated this into a car mount with the display revealed, so every day I got into my car I could slide it in, and it would charge, then I could slide it out and take it with me, or if I KNEW i was going to need extra battery, I could detach the whole thing and clip it to a belt or throw it in a pack?
Click to expand...
Click to collapse
Agree with this idea!
I don't mean to intercept, but in the meantime and between time...
I've received this pouch/sleeve (handmade) and posted a bit about it here:
http://forum.xda-developers.com/showpost.php?p=57285596&postcount=42
This pouch/sleeve has a front pocket and I slid in one of the Fone Qi Stone+ wireless portable chargers I use in that pouch and boom! Portable charging on the go.
Very cool idea man. I'll back that.
It looks promising, is there rough price range for the sleeve?
ejkeebler said:
if you are taking the no idea is a bad idea approach, what if you incorporated this into a car mount with the display revealed, so every day I got into my car I could slide it in, and it would charge, then I could slide it out and take it with me, or if I KNEW i was going to need extra battery, I could detach the whole thing and clip it to a belt or throw it in a pack?
Click to expand...
Click to collapse
That's a pretty sweet idea! Maybe that could come as a stretch goal or in the next iteration of ampere. I originally included a pocket at the back of the sleeve for cards and cash but didn't like the aesthetics/ bulk of it. That could actually have been space for a belt clip. Hmm. I could find some way to hack around it maybe.... thanks for the brilliant idea.
marctronixx said:
I've received this pouch/sleeve (handmade) and posted a bit about it here:
http://forum.xda-developers.com/showpost.php?p=57285596&postcount=42
This pouch/sleeve has a front pocket and I slid in one of the Fone Qi Stone+ wireless portable chargers I use in that pouch and boom! Portable charging on the go.
Click to expand...
Click to collapse
Please, feel free to share. I've been searching tirelessly for potential competitors too so I can learn how to improve ampere's user experience.
You know what, that's where I got the idea for ampere too, but I think I've made ampere sufficiently sexy, slim, and seamless with alignment + smart charging app that you'll at least consider it over that? If you must know, that was what I put together for the MVP (prototype) to prove product validation. So I guess you can say you just recreated ampere v1.
Pilz said:
It looks promising, is there rough price range for the sleeve?
Click to expand...
Click to collapse
Too soon to say. Saving the reveal for Kickstarter. Trust you understand
kkl0wn said:
I think I'm getting a QI enabled power bank for Christmas..... But a sleeve makes much more sense! I think its a great idea. Definitely more secure and will keep the QI aligned to ensure it stays charging.
Any info about the mah of the sleeve for the Nexus 6. Would need to be enough to charge the device at least twice in my opinion.
What about a using magnets to help secure the phone inside the sleeve instead of just tension?
Sent from my Nexus 6 using XDA Premium HD
Click to expand...
Click to collapse
I thought about magnets too, but the sleeve itself helps with securing the phone and alignment. Magnets would make it harder to get the phone out of the sleeve, and would necessitate some kind of strap to lift the phone out, which in turn adds some to bulk.
tongrhj said:
Too soon to say. Saving the reveal for Kickstarter. Trust you understand
Click to expand...
Click to collapse
I completely understand, either way it looks like a nice idea, and a convenient way to charge your phone.