Database Develop

[Q] CM7 15-11-2011 Version on S5570 Help

Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"

try to wipe dalvik cache too before falsh.
there a re new version of CM7, cm 7.1 17112011 and 7.2, you could try this version too!

This is all I can say....assuming u really are stuck there or boot looping.
Wipe data and cache before flashing and not after...though this should not be a prob.
Doing what I told works,

Flash cm7.x once again.. I'm got this problem from emanon to cm7.2, then i did reflash cm7.2 again...and now...cm7.2 on my phone and ....waiting RC.2 .... B-)
Sent from my GT-S5570 using xda premium

Flash it again, wipe data and cache, take out your SD Card then reboot.
Sent from my GT-S5570 using XDA App

GPS\NAVIGATION APPS does not work!!!
can enyone please help!
I've installed CM7.1 and every GPS app does not work.
I have the XXKPL version!
10X.

This happened to me,too! I just reflashed it. Sometimes this happens. I've read its called a 'bad flash'.
Reflash. That oughta work!

I've tried this for several times and yet not good!
any other suggestions??

ghost0815 said:
Hi peeps. I just need a little help if you guys can help me here. I recently just bought a Samsung Galaxy Mini S5570 with stock Froyo 2.2.1. I already updated to the latest Gingerbread 2.3.4 and I wanted to install a custom ROM using CM7.
1) I already rooted the phone.
2) Checked "Unknown Source"
3) Installed Clock Work Mod
4) Copied the latest CM7 (update-cm-7.1.0-GalaxyMini-KANG-signed-15112011) to root of SD card.
5) Booted to recovery mode and followed the following steps:
A) Wipe data and cache from the options
B) Select the option ‘install zip from sdcard’ then select ‘choose zip from sdcard’
C) Selected the zip "update-cm-7.1.0-GalaxyMini-KANG-signed-15112011"
D) Waited for installation to finish. After completion I wiped data & cache again.
Now here is my problem:
I followed all the steps over and over from yagyas way and other forums and even tried to clear only cache after installation but still my when my phone boots I am stuck on a screen with only "ANDROID" shown.
Could it be the latest CM7 that I am using that is not compatible with my unit? Or am I doing something wrong? Please help. I really want CM7 and any help here is greatly appreciated.
If you can help, and have the patience, please give me specific details on installing CM7 on my S5570. Thanks for all the help here.
By the way, my version of 2.3.4 Gingerbread is S5570DXKPD_S5570OLBKPD (Asia) and I was wondering if could this be 1 of the problems? Because in 1 of the forums I saw "FIRMWARE S5570XXKPI OR XXKPL OR XXKPK !!!!!! THIS IS FOR CWM USERS ONLY!!!!"
Click to expand...
Click to collapse
try flashing once again but without wiping data cache please re flash the gb firmware and recovey

Fussy GT-S5830

Hello all. I'm having trouble with a galaxy ace, in that it seems very fussy about which ROMs it will run. Bought it about 6mo ago from Optus Australia on prepaid and unlocked it to use on another network. I tried at the time to upload a custom ROM, but failed and ended up having to re-load it with Odin 4.38 and the only images I could then find, which are these:
APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
CODE_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
CSC_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
MODEM_S5830XXKPH_CL260130_REV03.tar.md5
Just recently the device has been unstable so I looked around and found the stable CM 7.2 ROM recently released (cm-7.2.0-cooper.zip) so I grabbed that, installed CWM 5.0.2.6, ran a backup and tried to install it. Device only got as far as the black boot screen with the word Android in uppercase doublespaced and hung.
Booted back into CWM and tried to restore, got the MD5 checksum error. Fixed the nandroid.md5 and tried again, and the device then hung at the initial boot screen for the stock rom (says Samsing Galaxy Ace GT-S5830 or similar).
Back to Odin. Found a recent version (4.42) and a one package ROM, S5830XWKT7_S5830OPPKS6_S5830XWKT3_HOME.tar.md5 and loaded this to the handset. This one gives me an Optus spashscreen followed by the sort of pulsing SAMSUNG text in an infinite loop.
Eventually tried the flasher and ROM I used six months ago (at the top of the thread) and was able to get the phone to boot successfully. Reinstalled the rooting package, reinstalled CWM5 and managed to restore just data out of the advanced backup/restore menu.
So I'm back to where I started, only six hours worse off Has anyone got any idea why this isn't working for me, or any good suggestions of how to proceed?
Cheers,
Alex

Are you sure you are using the GT-S5830 and not the Gt-S5830i ?
This was sent from a Galaxy Ace.

damn, that would be a stupid mistake
No, I'm not absolutely positive. The sticker under the battery says GT-S5830, but from a look at google images the two handsets appear identical? How can I establish for sure?

4lex said:
damn, that would be a stupid mistake
No, I'm not absolutely positive. The sticker under the battery says GT-S5830, but from a look at google images the two handsets appear identical? How can I establish for sure?
Click to expand...
Click to collapse
Alright , then that's weird.....what are your key combinations for DL Mode ?
This was sent from a Galaxy Ace.

Vol- & home ?

4lex said:
Vol- & home ?
Click to expand...
Click to collapse
Alright , I hereby conclude you have a problematic device and that I can't find services
"As a friend, just....put an end to me" - Ventus

Did u wiped data after the flash?
Sent from my brain using my GT-S5830

Marco Chung said:
Did u wiped data after the flash?
Sent from my brain using my GT-S5830
Click to expand...
Click to collapse
His system is still in ext4 file system he has to wipe data after the flash! You will no longer stuck in bootloop!

Oh god why
I forgot stock = RFS
"As a friend, just....put an end to me." - Ventus

thanks. How can I find out more about this file system issue? is there an app that will tell me how it's currently configured?

4lex said:
thanks. How can I find out more about this file system issue? is there an app that will tell me how it's currently configured?
Click to expand...
Click to collapse
Unfortunately , no.....
"As a friend, just....put an end to me." - Ventus

Use Odin 4.38, download any one package firmware from sammobile with your backup's android version (ie 2.3.4, 2.3.5 or whatever).
Flash it, wipe everything after Flash (from stock recovery), then root, install cwm and restore your backup.
Boot loops are mostly caused when you don't wipe after flashing. Connection issues can be fixed by flashing your region's modem.
Also, restore backups using the appropiate cwm version (backups of cwm5 restore with cwm5)

Cheers. Dunno if I'm being a bit simple here, but I'm only finding 10 most recent FWs here, all of which are 2.3.6 ?
I didn't do as much wiping as you suggest last time though, so i'll give it another whirl and see if I do any better.

I was being simple. Hadn't selected a region.
trying now.

Flash DXKPB 2.3.4 Asian firmware first. If you flash that, it will format all of your partition back to rfs
And after that you can just flash newer firmware like XWKT7 2.3.6 and wipe data. Voila!
Sent from my GT-S5830 using Tapatalk 2

i had stock 2.3.6 and i decided to download and flash Jellaxy
it works, but sometimes its slow, lagging and apps crashing
i have nandroids of both (stock and jellaxy)
i tried restoring stock 2.3.6
error restoring /system
advanced restore just system didnt work, too
i flashed 2.3.5 italian through odin (download mode)
odin didnt finish because of bootloop
i dont remember exactly, but i did wipe, factory reset, cache and/or other
it booted, finally (in italian)
then i formatted /data and recovered old data
bootloop
i tried wiping all at once: dalvik, cache, data, factory reset
bootloop
now i cant go to download / recovery by holding vol down/up and home and power, it goes to ramdump
recovery is now home + power
i can restore jellaxy, but not stock
what to do? i'm stuck on jellaxy

trogper said:
i had stock 2.3.6 and i decided to download and flash Jellaxy
it works, but sometimes its slow, lagging and apps crashing
i have nandroids of both (stock and jellaxy)
i tried restoring stock 2.3.6
error restoring /system
advanced restore just system didnt work, too
i flashed 2.3.5 italian through odin (download mode)
odin didnt finish because of bootloop
i dont remember exactly, but i did wipe, factory reset, cache and/or other
it booted, finally (in italian)
then i formatted /data and recovered old data
bootloop
i tried wiping all at once: dalvik, cache, data, factory reset
bootloop
now i cant go to download / recovery by holding vol down/up and home and power, it goes to ramdump
recovery is now home + power
i can restore jellaxy, but not stock
what to do? i'm stuck on jellaxy
Click to expand...
Click to collapse
To restore a stock rom your file systen to rfs !!!
And all custum rom are ext4!!
Meaning ... Use stock recovery to wipe data causing the system to become rfs again then install cwm and ONLY !!! Restore ! Otherwise if u format it will convert to ext4 again !
U can also use chainfire ext4 app to change file system in jellaxy and then restore.
Take care
Sent from my GT-S5830 using xda premium

SnowPluralism said:
To restore a stock rom your file systen to rfs !!!
And all custum rom are ext4!!
Meaning ... Use stock recovery to wipe data causing the system to become rfs again then install cwm and ONLY !!! Restore ! Otherwise if u format it will convert to ext4 again !
U can also use chainfire ext4 app to change file system in jellaxy and then restore.
Take care
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
what about that ramdump?
can i use mobile odin?

Help !!! Booting loop problem can't fix ..

I had a working stock firmware until I decided to install this http://forum.xda-developers.com/showthread.php?t=1793511
First it worked after few application installation and restart, I had booting loop problems, the Samsung Animation at start up then the Samsung Text and stuck in it for ever ..
I used Odin to flash to stock firmware DDKQ7_annson08.tar.md5, previously it worked. I did factory reset and wipe cache, but still the same problem,
I tried flashing for three times but no luck. I did the factory reset and wipe cache both before the flashing and after the flashing but no luck.
Please give me some ideas to fix it.
Whenever I quit the default stock firmware recovery it says Can't mount data partition
E: failed to mount /data invalid argument something like this.
Help

Have you installed it through ClockWorkMod recovery?
The steps needed to follow precisely is:
- Install Stock GB Firmware through Odin (You'll get it from Sammobile)
(It would be helpful if you specified the link where you installed the stock firmware)
- Install CWM recovery through Odin
- Boot into recovery and wipe data/cache/dalvik-cache/battery stats
- Install Zip from SD card
- Again wipe data/cache/dalvik-cache/battery stats
- Reboot
EDIT: I guess you installed/updated to GB from this link:
http://forum.xda-developers.com/showthread.php?t=1551586
If you updated from Froyo to GB with that link, it won't work because the bootloaders are removed from them. In order for Gingerbread/ICS/JB to work you need to have GB bootloader. So search in Sammobile and install stock firmware from there.

download stock fw from yagyagaire.blogspot.com
n then to move further..
Sent from my GT-S5570 using xda app-developers app

flash 4 package file it will write /data partition

coolsandie said:
Have you installed it through ClockWorkMod recovery?
The steps needed to follow precisely is:
- Install Stock GB Firmware through Odin (You'll get it from Sammobile)
(It would be helpful if you specified the link where you installed the stock firmware)
- Install CWM recovery through Odin
- Boot into recovery and wipe data/cache/dalvik-cache/battery stats
- Install Zip from SD card
- Again wipe data/cache/dalvik-cache/battery stats
- Reboot
EDIT: I guess you installed/updated to GB from this link:
http://forum.xda-developers.com/showthread.php?t=1551586
If you updated from Froyo to GB with that link, it won't work because the bootloaders are removed from them. In order for Gingerbread/ICS/JB to work you need to have GB bootloader. So search in Sammobile and install stock firmware from there.
Click to expand...
Click to collapse
Yes I used the one from the url you mentioned but previously it worked I don;t know how ? I always used the same to revert back to stock firmware.
Then I downloaded the official stock firmware for india from http://yagyagaire.blogspot.com/2012/01/official-samsung-firmwares.html#.UCPX3PbibOs
S5570DDKQ7
PDA: S5570DDKQ7
CSC: S5570ODDKQ6
OPS: TASS.OPS
Version: Android 2.3.6 Gingerbread
Country: India
Released: November 2011
I flashed it but still the same problem can anyone please give me step by step guide.. am lost and nothing getting in my head
I also flashed cwm recovery via Odin and Installed the custom firmware but still stuck in the logo,
the dalvik cache flush option doesn't work in cwm recovery is this the reason ?

Bump.. my mobile is NP can I flash this one this has boot files also ? http://www.androidaddicted.com/firm...read-2-3-6-s5570jvkt1-firmware-update-38.html please help

camelgrg said:
Bump.. my mobile is NP can I flash this one this has boot files also ? http://www.androidaddicted.com/firm...read-2-3-6-s5570jvkt1-firmware-update-38.html please help
Click to expand...
Click to collapse
Yes, its okay to flash that.

camelgrg said:
I had a working stock firmware until I decided to install this http://forum.xda-developers.com/showthread.php?t=1793511
First it worked after few application installation and restart, I had booting loop problems, the Samsung Animation at start up then the Samsung Text and stuck in it for ever ..
I used Odin to flash to stock firmware DDKQ7_annson08.tar.md5, previously it worked. I did factory reset and wipe cache, but still the same problem,
I tried flashing for three times but no luck. I did the factory reset and wipe cache both before the flashing and after the flashing but no luck.
Please give me some ideas to fix it.
Whenever I quit the default stock firmware recovery it says Can't mount data partition
E: failed to mount /data invalid argument something like this.
Help
Click to expand...
Click to collapse
Hello camerg,
There can be many indication of the problem that you are facing... It looks like you are from India, so I suggest you to flash this latest official Indian firmware using Odin. Full instructions are at : http://yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
After flashing the rom, wait till Odin says PASS and then go to recovery and do a data and cache wipe and reboot your handset. Your galaxy mini should boot fine.
If your handset doesn't boot still then, install CWM using Odin and then flash any custom rom using clockwork mod recovery. Now after flashing the rom wait for few minutes and your handset should boot fine.
Good Luck and Happy flashing!

Hey man, how are you doin'?
were you able to flash it using odin and followed all of the steps these guys informing you and the links given to you.
which one, if you are stuck on the Samsung logo and it doesnt wanna go all the way through, you either go and visit the service center or if you know a repair shop, go there and your phone needs JTAGGING. if your phone is stuck on the SAMSUNG logo.
if you can access the stock recovery mode, install the latest CWM, go to the mounts and storage > select format data, cache, system, and SD-ext. this similarly happened to me. i selected the wipe data/factory reset option but it didnt resolve the problem and it is saying something like E: error cant mount yada yada yada.... i wiped them one by one and worked.
your phone wont be needing JTAGGING if you can access the recovery mode of it. it means that your phone's system (Hardware) has no damaged in it, it is your phone's software. do these steps in order for the phone to wipe everything by doing it one by one
give us a reply if this worked.

Hi
Go and flash a stock 2.3.6 ROM from Samfrimware.com using odin after you get pass sign from odin if you get boot loop clear data an cache from recovery and reboot if you get boot loop flash the file that is same to your ROM with Odin from here like if you downloaded gt-s5570 jpkt2 then the jpkt2 PDA file
http://forum.xda-developers.com/showthread.php?t=1398797
And partion your SD card to ext4 to be your new data partion and the secondary partion that you must fat if you have a 2gb SD or smaller and if you have 4gb SD or larger select fat32 and the two partions must be primary then pot your SD in the phone and reboot this will make the phone mount the ext4 partion as your phones data partion so if there are a problem with the phones data partion it will make the work again
Sent from my GALAXY mini using xda premium

[Q] Galaxy S Plus black screen, CWMrecovery says "can't mount...

I'm a noob I know and yes I watched the noob-video. But I need help! Cuz I'm too dump! So please help me
I wanted to update my Galaxy S Plus to the newest CM 10 (Beta 4) (before it was the Beta 3) over the CWM recovery it suddenly says
"symlinks failed"
"error in /sdcard/cm-10-20130324-invendor-beta4-ariesve.zip"
"(Status 7)"
"installation aborted"
so I looked to the CWM recovery and I saw that I don't have the latest version....okay I downloaded the latest one and installed it over the CWM recovery. The same error .... with friends. Now I got when I went into the CWM recovery: (after I tried to wipe data/factory reset or wipe cache)
"E:Can't mount /cache/recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount /cache/recovery/last_log"
"E:Can't open /cache/recovery/last_log"
I tried to restart the phone...black-screen after the samsung cyanogen mod screen.
Okay
So I tried to flash a older firmware "I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5" with Odin. I restarted the phone...nope black screen. I installed the newest CWM recovery again and tried to flash again the CM 10. Black-screen. So I tried the old version of the CM which I had before (Beta 3) -> black-screen and still errors in the recovery mode.
I can still go into the download mode and the recovery mode. The charging symbol is not working when i connect it (just the battery but bot moving)
My device:
Samsung Galaxy S Plus
Provider: Vodafone IT
ROM: CM 10 (Beta 3) installed but not working
Kernel: Phenom 3.2 UV (updated after the symlinks failed error)
I hope some genius out there can help me
And sorry for my bad english...I don't use it often (Italy)

Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have

Thanks!
Hey! Thanks a lot! I'll try it out and report it if its working :good:

EwOkie said:
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Click to expand...
Click to collapse
!!!!!!!!
dont download the files there!
i think they are for i9000, but the thread starter has an i9001
!!!!!!!!!
have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco
edit: just found
http://forum.xda-developers.com/showthread.php?p=39640245
Regards

Okay
Okay! I didn't do it yet sooo ... I'll try that one and thanks for the link! :good:

then...?
"have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco"
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?

Imanidiot said:
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Click to expand...
Click to collapse
take your time...
what errors does the cwm 5.5.0.4 recovery shows without doing anything?
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu

Hi everybody I'm new.
My situation is exactly the same, I did the same things, got the same problems... got stuck with no solutions yet if not to send it to samsung assistance.
Flashad many other android phones in the past and never had issues like this... it's a nightmare...

try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Click to expand...
Click to collapse
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7

Imanidiot said:
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Click to expand...
Click to collapse
I also tried the broodROM RC5, succesfully flashed with Odin but still the same problems as before.
Can't format /data.

Stock-Firmware
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/

Imanidiot said:
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Click to expand...
Click to collapse
I already did that too but it didn't work...
I'm gonna go to the samsung assistance in the afternoon... :crying:

Well....Nothing is working...Anyone who could help me? ... Or better us..

If my guide is no use to you as its for i9000 : try this HERE
If that helps you in any way let me know.

I did this already... I flashed it with the newest stock-FW but it doesn't do anything...and the stock-recovery can't make a factory reset. It always freezes....

other things that could be worth a try:
try flashing different recoveries - not only feamod... also cwm,...
for me cwm5.5.0.4 works
look: our wiki-page -> un-brick
if all doesnt help you could try to reset all partitions

I tried already a few recoveries...like the CWM or the TeamWin... How can I reset them? Can you give me a link please? ^^

Flash BroodROM RC 5... flash this multiple times without touching any buttons like repartion etc..
After that, wipe system and data via the recovery provided in the ROM.
Then flash the newest stock FW from samsung..
This solved all my issues multiple times xD

thanks for the reply, but my phone is now finally brocked....it doesn't even start....and I don't have any idea what i can do now...

??
So, now Samsung, no Samsung Galaxy S Plus GT-I9001? No nothing. Not even the soft brick image (see wiki)

Galaxy i9000 upgrade went wrong

Hey everybody!
I have a big problem! I tried to upgrade my samsung galaxy i9000 4.2.1 to kitkat, but it failed. i know where the problem was, but now, i have a different problem.
My phone doesn't want to start. when i press the power button it just pups up the intro screen Galaxy s GT i9000 and nothing happens. I can go to download mode and clockwork recovery mode.
Since the first failed attempt i have many times factory reseted, wiped cache partition and dalvik cache.
i hope that i didn't screw up my phone and that somebody will help me.
Sorry for bad english

petek92 said:
Hey everybody!
I have a big problem! I tried to upgrade my samsung galaxy i9000 4.2.1 to kitkat, but it failed. i know where the problem was, but now, i have a different problem.
My phone doesn't want to start. when i press the power button it just pups up the intro screen Galaxy s GT i9000 and nothing happens. I can go to download mode and clockwork recovery mode.
Since the first failed attempt i have many times factory reseted, wiped cache partition and dalvik cache.
i hope that i didn't screw up my phone and that somebody will help me.
Sorry for bad english
Click to expand...
Click to collapse
Okay, the fact you can go to download mode and CWM is excellent. The factory reset and wiping wont fix as their isn't an OS there due to it not installing properly. Just download another ROM to your SD as your current one appears to have an error and flash through CWM.
If that fails use odin and download mode to flash stock ROM on to your phone for a usable device

TechMinerUK said:
Okay, the fact you can go to download mode and CWM is excellent. The factory reset and wiping wont fix as their isn't an OS there due to it not installing properly. Just download another ROM to your SD as your current one appears to have an error and flash through CWM.
If that fails use odin and download mode to flash stock ROM on to your phone for a usable device
Click to expand...
Click to collapse
I used odin and flash stock ROM and it worked!
Do you have a toturial how to upgrade my galaxy i9000 GT gingerbread to kitkat? )
I tried many of them, but always is a step missin or something goes wrong
thank for the hel!
Se yaaa

petek92 said:
I used odin and flash stock ROM and it worked!
Do you have a toturial how to upgrade my galaxy i9000 GT gingerbread to kitkat? )
I tried many of them, but always is a step missin or something goes wrong
thank for the hel!
Se yaaa
Click to expand...
Click to collapse
To be honest its pretty much a generic tutorial for all, just download the KitKat ROM for your phone allong with its Gapps.
Now download the CWM verson for your phone and flash it like before
Once flashed boot your phone up to make sure it works, then copy the ROM and Gapps across. Now boot back into recovery and make a nandroid backup, then select the wipe data/factory reset option and the wipe cache options. Then flash the ROM and Gapps and your phone should have Kitkat