I tried install old CM7 version but the same s***... Tried to restore via CWM and Titanium Backup. But no difference - Wi-Fi is not working. When I back to EmaNon it again works. Any suggestions?
lietuva said:
I tried install old CM7 version but the same s***... Tried to restore via CWM and Titanium Backup. But no difference - Wi-Fi is not working. When I back to EmaNon it again works. Any suggestions?
Click to expand...
Click to collapse
hi, wifi wroking fine for me..i m on cyanogen music edition!!
-=LT-United=- said:
I tried install old CM7 version but the same s***... Tried to restore via CWM and Titanium Backup. But no difference - Wi-Fi is not working. When I back to EmaNon it again works. Any suggestions?
Click to expand...
Click to collapse
I have the same problem
Sent from my GT-S5570 using xda premium
I had the same problem. To fix it reflashed my phone to KPK firmware. Put Clockword Mod. CLeared user data and cache and installed CM7. It was fixed.
-=LT-United=- said:
I tried install old CM7 version but the same s***... Tried to restore via CWM and Titanium Backup. But no difference - Wi-Fi is not working. When I back to EmaNon it again works. Any suggestions?
Click to expand...
Click to collapse
Related
My O2X had some problems recently and I decided to use "fix permissions" in the CWM recovery to try to solve it. Before this, I did a Nandroid backup using the latest ROM Manager (with CWM recovery 3.0.2.8).
After the backup, I did "fix permissions", then reboot. But most of the texts on the screens and menus are missing!! that's very strange. Luckily I had my backup.
So, I reboot into recovery and then did a complete restore. But the worse thing happened... the phone hanged at the boot screen with the LG logo (before the animation). It just stopped there... I tried to restore some earlier backup as well, it's the same!
I'm totally lost, because CWM recovery had been so reliable before... I had used Paul's version many times before and it worked without problem... is the newer version buggy?
Anyone know what's wrong? and how to recover??
Dunno whats wrong but if you want ur phone to work again use smartflash.
Sent from my LG-P990 using XDA App
It happens when restoring CM from backup as well, the solution then is to reflash after restoring.
Rusty! said:
It happens when restoring CM from backup as well, the solution then is to reflash after restoring.
Click to expand...
Click to collapse
you mean reflashing the baseband?
No, the cm zip file. Obviously not what you want if you're on a stock ROM though.
But even if you're on a stock ROM, you can download and reflash a stock ROM over the top .
Rusty! said:
No, the cm zip file. Obviously not what you want if you're on a stock ROM though.
Click to expand...
Click to collapse
Thanks all for your kind advice. I have flashed the whole firmware and restored an older backup.
And i have reverted to use v10a rom as the v10d and the new baseband seems causing a lot of issues.
Sent from my LG-P990 using XDA App
Changing the ROM doesn't touch the baseband. You need to flash that separately.
So, I am using CM7 on my i9000 and I want to simply try the MIUI.
I have just wanted to make a nandroid backup, install MIUI zip and then restore back to CM7
Will it work, or MIUI uses the custom Kernel?
superstepa said:
So, I am using CM7 on my i9000 and I want to simply try the MIUI.
I have just wanted to make a nandroid backup, install MIUI zip and then restore back to CM7
Will it work, or MIUI uses the custom Kernel?
Click to expand...
Click to collapse
Just do a data wipe and flash Miui via cwm.
To go back, wipe data again, install the new cm7 nightly, then restore your nandroid.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
Just do a data wipe and flash Miui via cwm.
To go back, wipe data again, install the new cm7 nightly, then restore your nandroid.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
But doesn't nandroid backup EVERYTHING, including the rom itself? So, shouldn't I restore, and then update the Nightly?
I wanted to try different kernel so I preformed full backup via recovery. Now when I restore from backup, all apps restores however data doesn’t (i.e. whatsapp) . I have also tried previous (3) backups and same problem with them as well.
Any suggestion what I need to do?
FYI:
ROM- Froyo Cream Sandwich FBL (FroyobyLaszlo)
ATZ-007 said:
I wanted to try different kernel so I preformed full backup via recovery. Now when I restore from backup, all apps restores however data doesn’t (i.e. whatsapp) . I have also tried previous (3) backups and same problem with them as well.
Any suggestion what I need to do?
FYI:
ROM- Froyo Cream Sandwich FBL (FroyobyLaszlo)
Click to expand...
Click to collapse
sounds like your clockworkmod is causing the problem, is there a diffrent clockworkmod you can flash from rom manager?
Android311 said:
sounds like your clockworkmod is causing the problem, is there a diffrent clockworkmod you can flash from rom manager?
Click to expand...
Click to collapse
Thanks for your reply.
I currently have ClockworkMod Recovery v2.5.0.7
As far as I know, this is the latest version.
Is there a way you can download another version for your device?
Sent from my HTC_A510c using XDA
ATZ-007 said:
Thanks for your reply.
I currently have ClockworkMod Recovery v2.5.0.7
As far as I know, this is the latest version.
Click to expand...
Click to collapse
I always had installed the latest amon ra recovery and never have problems with backups & restores
Enviado desde mi LG-E730 usando Tapatalk 2
hi Guys, am new in this custom rom but have one problem i just install AbyssNotekernel in my note through CMW i was on custom ICS rom was planing to install KingDroid ICS rom but after installing this kernel it got stuck in startup showing Samsung Galaxy Note GT-N7000
please help:crying:
sandy_thegame said:
hi Guys, am new in this custom rom but have one problem i just install AbyssNotekernel in my note through CMW i was on custom ICS rom was planing to install KingDroid ICS rom but after installing this kernel it got stuck in startup showing Samsung Galaxy Note GT-N7000
please help:crying:
Click to expand...
Click to collapse
Reboot into recovery and flash ROM or a safe ICS kernel like Speedmod or Notecore.It will all up again
Cheers
tried Notecore
i tried Notecore but its showing Can't open and installation aborted :crying:
sandy_thegame said:
i tried Notecore but its showing Can't open and installation aborted :crying:
Click to expand...
Click to collapse
Are you trying with cwm flashable .zip file for Notecore?
I hate it when that happens
But i usually try and clear all caches, and try again... And then i try to install what ever was on the phone, before the problem arose...
thanks guys for quick respose i flash speedmod kernel and now it working fine, and but now my phone is not going in deep sleep mode and how can i flash custon rom (Kingdroid rom) and with which kernel suits it because have stock ICS 4.0.4 rom :fingers-crossed: and what about backup of my stock rom
please bare with me am a new comer
sandy_thegame said:
thanks guys for quick respose i flash speedmod kernel and now it working fine, and but now my phone is not going in deep sleep mode and how can i flash custon rom (Kingdroid rom) and with which kernel suits it because have stock ICS 4.0.4 rom :fingers-crossed: and what about backup of my stock rom
please bare with me am a new comer
Click to expand...
Click to collapse
Turn On the Airplane Mode
Switch off your phone
Take the battery out for a minute or two
Put it back and switch it ON
Wait for everything to load
Turn off the airplane mode
This will sort out your deep sleep problem
Thanks pal and what about installing custom rom and backup my stock rom
Thanks pal and what about installing custom rom and backup my stock rom.
sandy_thegame said:
Thanks pal and what about installing custom rom and backup my stock rom
Click to expand...
Click to collapse
Which ROM you want to install ?
i want to install kingdroid rom
sandy_thegame said:
i want to install kingdroid rom
Click to expand...
Click to collapse
So first boot into recovery and mqke a backup under backups and restore.
This will backup your current rom.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
ok i will try and what about application backup i backup all my application through titanium backup but it backup half application only some application like antiv-virus, what-app didnt backup:crying:
sandy_thegame said:
ok i will try and what about application backup i backup all my application through titanium backup but it backup half application only some application like antiv-virus, what-app didnt backup:crying:
Click to expand...
Click to collapse
Above method also backups your applications
ya it backup my app and i restore it too but the problem is it didnt backup all the application is this because am using normal version or should i go for pro ver.
sandy_thegame said:
ya it backup my app and i restore it too but the problem is it didnt backup all the application is this because am using normal version or should i go for pro ver.
Click to expand...
Click to collapse
I am tqlking about nandroid backup in CWM. For titanium backup you have to buy the pro version.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
nandroid backup in CWM didnt get up how can i use both together and will this backup all application and contact/sms.
sandy_thegame said:
nandroid backup in CWM didnt get up how can i use both together and will this backup all application and contact/sms.
Click to expand...
Click to collapse
For a nandroid backup you have to boot into recovery(CWM) and under backup and restore you can backup the rom as well as applications on your external SDCard.
There is no need to use Titanium if you are using CWM.
However if you don't know how to backup with CWM and your device is rooted then you can use Titanium Backup Pro to take backup of System+Apps Data.
got it and now have done with backup now what next and i have speed mod kernel will its go with king droid rom
sandy_thegame said:
got it and now have done with backup now what next and i have speed mod kernel will its go with king droid rom
Click to expand...
Click to collapse
It's good that you have backup now, but why don't you download stock firmware as backup of ROM and use titanium backup for backup of apps? And yes, you can flash Kingdroid rom with Speedmode, it will be then replaced by the kernel you will choose in Aroma while flashing kingdroid.
Can u update from cm9 to cm10 by using goomanager? Just like the way i updated my nightly? I already have a nandroid backup.
mdav07 said:
Can u update from cm9 to cm10 by using goomanager? Just like the way i updated my nightly? I already have a nandroid backup.
Click to expand...
Click to collapse
Maybe if there was an update build...
yes, tried to install CM10 from CM9 and work; the problem is no sound on CM10.
so far so good. when i tried to downgrade to CM9, touchpad won't boot on android, i get an unresponsive tablet: boot looping..... what can i do to downgrade back to CM9 (installed TWRM)
thx.
calin
rareshutzu said:
yes, tried to install CM10 from CM9 and work; the problem is no sound on CM10.
so far so good. when i tried to downgrade to CM9, touchpad won't boot on android, i get an unresponsive tablet: boot looping..... what can i do to downgrade back to CM9 (installed TWRM)
thx.
calin
Click to expand...
Click to collapse
Did you make a backup before installing CM10 ?
nope... It's a must to make a backup?
klinutzu said:
nope... It's a must to make a backup?
Click to expand...
Click to collapse
To go back to exactly the way things were, yes. You can still back up your apps from CM10 and restore them on a clean CM9 flash.
I don't need any app. Tried to install a fresh cm9, but the tablet won't start: it remain on boot animation...
klinutzu said:
I don't need any app. Tried to install a fresh cm9, but the tablet won't start: it remain on boot animation...
Click to expand...
Click to collapse
Did you wipe everything: /system, /data, and /cache? (Just making sure.) Did you check the md5sum of the CM9 ROM?
yeap, wipe everything, installed fresh cm9, checked md, but still problems..
klinutzu said:
yeap, wipe everything, installed fresh cm9, checked md, but still problems..
Click to expand...
Click to collapse
Could just be a bad flash. Did you try reflashing? You're sure you're using a CM9 version for tenderloin? (Just covering all the bases.)