Backtrack5/Ubuntu v10.04 Up & Running On Tab 10.1
StatementHave this on my Samsung Galaxy S2 and working perfect so i figured i would give it a try on the Tab 10.1. There were alot of people who helped get this running for other devices i will mention them so dont worry. Alot of modifications had to be made in order to get this to run on the Tab because it was really made for a phone not a tablet so please follow all the steps cause there is certain code that i had to right to get the screen size to fit. Everything is fully functional and working. Finally i think this would be a nice addon to your Tab esp if your a big Ubuntu fan, I am currently working with other developers to see if we can update this so it has the new Ubuntu v11.10 but for now follow the steps and enjoy and if theres any questions or requests just write on the thread and PM me. ENJOY!!!
Disclaimer
I am not responsible for damaged devices, bricked devices, Soft bricked devices, and if you run wrong code ETC
Thanks To:DooMLoRD, anantshri, n1nj4dude, KingOfThaJungle None of this would be possible without these guys and if im missing anyone please let me know and im sorry
Before We StartThere are going to be 10 files attached at the bottom you need to download all 10, place them on your desktop for now i will explain what your going to do with them after. Next you need to download 7Zip heres the link http://www.7-zip.org/download.htmlOk now those 10 files waiting on your desktop extract ONLY 1! i chose to extract bt.7z.001 once you extract you will be given a .img file create a folder called bt and put all ten of the files inside bt including the .img so you now should have a folder on your desktop called bt with 11 files in it. Take this folder and put on the root of your Tab.Now there will also be another file attached called bt5_sgs2_shell_scripts_v2 take this file and put it on the root of your Tab. Reboot into recovery mode and wipe cache and davik cache and then flash that file once complete reboot your Tab.Once your rebooted use some kind of file explorer i used root explorer and check the /sdcard/bt folder for the following it should look like this when you explore it./sdcard/bt/bt/sdcard/bt/bt.img/sdcard/bt/installbt.sh/sdcard/bt/startbt/sdcard/bt/stopbtOnce your verify that the above if correct you can proceed
Instructions On Launching BTStart Terminal Emulator on your Tab and enter the following commands step by step.sucd /sdcard/btsh installbt.shstartbtbtNow your in Back Track 5 shell! You should see [email protected]:
Instructions On Launching VNC ServerDownload VNC Server from the marketThen still in terminal typevncserver -geometry 1280x700You then will be presented with [email protected]: againThen look under it were it says new 'X' desktop is localhost1 that it the last digit in your port number if you ever exit VNC or close terminal or reboot you will have to run some commands to get back witch i will show you in a minute but always look at that localhost # cause it will change if you reboot so pretty much if it says localhost2 your port would be 5902 get it?
Now Launch AndroidVNCEnter the following into AndroidVNCNickname: btPassword: 12345678Address: 127.0.0.1Port: 5901Username: (Leave Blank)Color Format: 24-Bit Color (4bpp)
Getting Back In After RebootType the following commands to get back insustartbtbt
Screenshots & LinksAt Bottom Thank you and Enjoy!!!
Go to this page for the 10 files http://www.mediafire.com/?f9gk3p3t9wip5
Uhm... file bt.7z.001 is corrupted!? Please check. However, thank you.
go onto the original thread and get the files from there sorry i only posted the mirrors heres the link and your welcome hope you enjoy
http://forum.xda-developers.com/showthread.php?t=1331419
Haven't tried yet but looks great, sweet!
works good. nice guide. i suggest people download bt5_sgs2_shell_scripts_v2 from the link in the 3rd post
Cool. Does the wireless "card" in this device support injection?
FillTheVoid said:
Cool. Does the wireless "card" in this device support injection?
Click to expand...
Click to collapse
I would love to know this
Sent from my GT-P7510 using Tapatalk
i believe it does but im not 100% on that
I cannot get this to work. Every time I try to install the bt5_sgs2_shell_scripts or bt5_sgs2_shell_scripts_v2, it says installation aborted. Needs to be Nandroid restored otherwise it won't boot. Any ideas?
So can i use both of honeycomb and ubuntu alternatively or together? Because in screenshots i can still see honeycomb taskbar at bottom over Ubuntu.
Nice work. And how to uninstall it?
Ok for JAYDAWGX7: are you wiping cache and davik cache before flashing and is your cwm up to date? if so and still having problem try a different kernal and get back to me
Ok for PARAG31: yes you can run bolth all backtrack5/ubuntu is doing is running threw vnc you are not loosing honeycomb you still have that as a base platform backtrack/ubuntu is just running threw vnc so to answer your question this does run bolth
I try with two diferents kernels and roms first task650 in paris v5 and other with task650 new honecomb 3.2 stock and no luck to install the zip file in recovery instalation aborted allways display. please post your roms and kernels info to migrate and run this on my gt
celtichazard said:
I try with two diferents kernels and roms first task650 in paris v5 and other with task650 new honecomb 3.2 stock and no luck to install the zip file in recovery instalation aborted allways display. please post your roms and kernels info to migrate and run this on my gt
Click to expand...
Click to collapse
Yep, same problem here. Any ideas? Any one else try this?
P7500 running Overcome 10.1 Rom, with Pershoot Kernel 2.6.36.4, with CWM v5.1.2.3. Yes with wipe of both cache.
EDIT:
After further investigation, the zip file only contains the files found in the bt folder. Just extract it to the /sdcard/bt dir. Assuming that it makes no other changes to system.
Got to [email protected], haven't done the rest yet! Will update post later.
EDIT:
Everything works after this.
Plus, i dont think monitor mode or injection works. Not without modified drivers (STILL HOPING ITS NOT THE CASE). Maybe usb? Hows usb hosting on this? Hope someone can answer these questioms.
I have a compatible wifi adapter, but no usb adapter for the tablet! I'll put it on my buy list.
Will this work on the 3G version also?
Edit: Awesome! It works perfect, thanks! Only remember to have busybox installed guys!
The correct resolution is 1280x752, so it is : "vncserver -geometry 1280×752"
also ur script isnt flashable. only thing in /data is busybox, just install busybox from market and change script
will work on 3g and wifi versions
very nice, also works on GTab 7310 (8.9 Wifi 3g)
heaven, thank you!
Awesome, works like a charm, and it blows everybody's mind.
I spent a little time on try to get capture mode to work, but gave up with the original network drivers.
I hoped it would be possible to use a normal usb wifi stick connected to the adapter, compile the drivers, and load them as modules, but i'm getting error messages when doing that, and that's where my knowledge of linux ends.
Anyone tried this yet? Any pointers? (currently flashing overcome 2.0, will try to post errormsg later)
Also, I read in one of the CarrierIQ threads that one of the pieces of the app actually uses libPcap to snoop on our asses. Would it be any help (or problem) that that's enabled in the parent OS?
Just one question: Can I use bluetooth keyboard/mouse with it? And will TrueCrypt run?
Related
This thread is about installing Android natively on your Vogue so it completely replaces Windows Mobile.
[size +1]Important: This thread is now out of date, if you want to flash Android, use the new "norootfs" NBHs.[/size]
There are 2 installation methods:
If you are already running android from your sd card then use method 2, if you want a fresh install of android 1.5 from a windows machine use method 1.
For both methods, you must have a HardSPL installed, if you have flashed a custom wince rom before then you will, otherwise read one of the other threads on XDA about how to do this.
Method 1:
------------------------------------------------------------------
download the following:
http://www.mediafire.com/?zldjhfnkzk2
Unzip it and follow the instructions in README-ANDROID.txt.
All you have to do is copy the androidinstall.tar file to your sd card and run ROMUpdateUtility.exe on your PC.
Now Donate:
https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
Method 2:
------------------------------------------------------------------
Check here for NBH files containing a linux kernel and initrd to allow you to flash android to your vogue and wipe windows completely.
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
The ROMs are dated and there are three versions.
They are identical except the resolution; 240x320, 320x428 and 320x480.
You will also need a new rootfs:
http://it029000.massey.ac.nz/vogue/files/rootfs.zip
This rom will copy your rootfs, system and data to nand (the internal storage of the phone) so you will only be running from nand. To do this, make sure you have a working setup (using system.sqsh and data.img without partitions) and install the new rootfs. Make sure it still works.
Make sure you have a carrier rom to go back to. Android currently doesn't let you change any of the radio parameters so you would have to flash back to a carrier rom to re-provision your phone.
Now create 3 empty files in the root of your sd card called:
rootfstonand
systemfstonand
datafstonand
These must be all lower case with no extensions and they will be deleted once each fs has been copied.
Now flash the rom corresponding to your resolution and wait.
There are 3 ways to flash a rom.
1. Use ROMUpdateUtility under windows (this may not work on these roms, i haven't tried it). Rename the nbh file to RUU_signed.nbh.
2. Use HTCFlasher under Linux, this is what I have been doing and although a bit quirky, it does work. A binary that fixes a few things with HTCFlasher is on the website.
3. Rename the nbh file to VOGUIMG.NBH, put it on an SD card and boot the phone while holding down the power and camera keys.
When it starts, it should be running from nand. The tmp and cache dirs are still mounted from sd, so you do need the sd card in there but it's not really used much.
If something goes wrong or you haven't copied the correct files, press volume up while it is booting (after the two vibrates preferably). It will display a message saying that its in recovery mode. You should be able to plug the phone into a computer and the sd card will appear as a usb drive. You can also connect using adb.
There are a few limitations, rootfs must be less than 13M, system must be less than about 90M and data must be less than about 128M. This means unless you use a very stripped down system with apps2sd, hero probably won't work.
I've put a linux adb binary on the files page that fixes the annoying history 'feature' too.
Remember, this will completely wipe windows mobile and all your data from the phone. Run android from SD first to make sure you like it and don't want to be able to easily go back to windows mobile.
I've spent a lot of time on this so I would like people to donate if they use it.
This is my paypal:
https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
Woot!
Doing this now =)
dzo said:
I've spent a lot of time on this so I would like people to donate if they use it.
This is my paypal:
https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
Click to expand...
Click to collapse
I'm paypaling 5 bucks right now.... and I dont have a Vogue, I have a kaiser, but hey, $5 is long overdue for all the work you've done for the kernel... if NAND support hits the kaiser, I'll probably throw another $5-10 your way.
*paypaled - I normally dont do this kind of stuff, but its the holiday season, the MSM Android project has made SO much progress cause of DZO, if everyone just donated $5-10, it would at least be a nice gesture for all the work he's done*
I just registered to say thanks for all the hard work! I'll paypal you some cash once I get it up and running! I have a couple questions...
First, what works and doesn't work with this version? Bluetooth, tethering, nav?
Second, what version of android is this?
After flashing android using this method, can you still force the phone into the bootloader? I am assuming this is how you would flash back to windows.
Thank you, dzo. This is incredible work!
Now that you've gotten this far, can you answer some questions for those of us considering making the switch to Android:
What is/is not working in this build?
What version of Android is this?
What are the advantages of running one resolution over another?
Will we require new drivers to sync to our PCs when running Android instead of WinMo? Are they available for all OSes? (XP, Vista, 7, OSX, Linux)
How can we return to WinMo if necessary?
What's next in your development goals? With any ideas, can you give any sort of time frame on what we can expect and maybe when?
If I understand correctly, theres "NO" build in here, you play with builds in your DS, and when you are ready and like one..you just use that system.sqsh data.img rootfs (provided) and..the nbh, all in the root of the sd card. And it will flash the nand with your files! So..thats it!
Nice one dzo, hoping for you to get to kaiser
Hey Martin, I can't even use these flashable images, but if it weren't for you I wouldn't even be running Android via haret, plus you've answered so many of my questions and I've never donated. So, since you're actually now, I'll donate $10.
flashing from windows
Can someone try flashing from windows, then use mtty and run
Code:
set 16 0
task 3
I had to do that to get my test phone out of bootloader last night even after flashing from Linux. But it's up and running 'the new old fashioned way' now.
gswarriorfan said:
I just registered to say thanks for all the hard work! I'll paypal you some cash once I get it up and running! I have a couple questions...
First, what works and doesn't work with this version? Bluetooth, tethering, nav?
Second, what version of android is this?
Click to expand...
Click to collapse
nothing that hasnt already worked works there is no change...
dj13241 said:
After flashing android using this method, can you still force the phone into the bootloader? I am assuming this is how you would flash back to windows.
Click to expand...
Click to collapse
yea camera + power + reset hole
Shidell said:
Thank you, dzo. This is incredible work!
Now that you've gotten this far, can you answer some questions for those of us considering making the switch to Android:
What is/is not working in this build?
What version of Android is this?
What are the advantages of running one resolution over another?
Will we require new drivers to sync to our PCs when running Android instead of WinMo? Are they available for all OSes? (XP, Vista, 7, OSX, Linux)
How can we return to WinMo if necessary?
What's next in your development goals? With any ideas, can you give any sort of time frame on what we can expect and maybe when?
Click to expand...
Click to collapse
i can answer a few
1 nothing that wasnt already working this isnt a build!!!, this is a way for VOGUE users to be able to put a working build "data.img and system.sqsh" they already have working on their phone and to be able to get rid of android
2 this isnt a build
3 320x240 shows more on screen 320x428 and 320x480 show more on screen but it is a little blurry
4 you will require adb drivers located on http://code.google.com/p/vogue-android and as far as i know they work on vista 32 and win 7 32 bit and there are different ones also located at vogue-android for win 7 64b
there are adb drivers for linux in the android SDK located here http://developer.android.com/sdk/1.6_r1/index.html make sure you download 1.6r1 though! 1.5r3 doesnt work for our devices in linux
5 just reflash any wm rom (that works with vogue of course)
mrkite38 said:
Can someone try flashing from windows, then use mtty and run
Code:
set 16 0
task 3
I had to do that to get my test phone out of bootloader last night even after flashing from Linux. But it's up and running 'the new old fashioned way' now.
Click to expand...
Click to collapse
you could also use the bootloader cmd prompt in htc flasher and do:
Code:
set 16 0
ResetDevice
Does this have lcd density set? Because eclair is density 120, but looks better in 320x428 with 160 density. If not, is there a way to set density after flashing?
Ahhh ok I get it now. I'll still donate when I get it up and running. Thanks!
OMFG!!!! dzo you are something else!!!
I just got my Vogue a few weeks back and I am surprised on how well Android runs on this thing (I have a Raphael as well, but no comparison to this)
Having a flashable rom to a WM device... unbelievable...
Kudos for your work man!!!!
I guess the question on a lot of people's minds right now is this... how do you go back to WM?
you could also use the bootloader cmd prompt in htc flasher and do:
Code:
set 16 0
ResetDevice
Click to expand...
Click to collapse
I tried that and it came back in bootloader with 'RUUNBH' in the upper right corner. Then I added the task3 and it booted normally. Who knows, maybe I did something else funny.
I used htcflasher on my newly-reloaded ubuntu laptop, but I wasn't able to get it to work under windows. So I thought that maybe flashing from windows was ok, but it just needed a kick through mtty to get going.
What do those two bootloader commands do? Not that it really matters since dzo says the newest version should work from windows anyway...
egzthunder1 said:
I guess the question on a lot of people's minds right now is this... how do you go back to WM?
Click to expand...
Click to collapse
Boot back to bootloader and flash it! Did that myself last night.
Also, how do we make a smaller data.img? I keep getting 256MB versions.
scizzle said:
Does this have lcd density set? Because eclair is density 120, but looks better in 320x428 with 160 density. If not, is there a way to set density after flashing?
Click to expand...
Click to collapse
There's no density set on the kernel cmd line, I'd have to make another nbh for that.
However, since system can now be made r/w you should be able to edit /system/default.prop to change density.
Do:
adb remount
adb pull /system/default.prop .
edit the file and change ro.sf.lcd_density
adb push default.prop /system/
reboot
Thanks you so much dzo. i got this working, now im going through all my android files on my computer to find a build that i like, and wanna keep as my main build, but one thing, does the data really have to be less than 128mb? because almost all my android builds are alot bigger which is annoying.
but other than that it worked like a charm. thanks so much.
p.s. once i get some $$ (the 15th of december [my payday]) and find a permanent build i'll send some donations for you hard work.
dzo said:
There's no density set on the kernel cmd line, I'd have to make another nbh for that.
However, since system can now be made r/w you should be able to edit /system/default.prop to change density.
Do:
adb remount
adb pull /system/default.prop .
edit the file and change ro.sf.lcd_density
adb push default.prop /system/
reboot
Click to expand...
Click to collapse
Legend! Thank you. I will try it as soon as I can figure out the data.img haha.
scizzle said:
Also, how do we make a smaller data.img? I keep getting 256MB versions.
Click to expand...
Click to collapse
jamezelle said:
i used the following commands to make a new data img
Code:
dd if=/dev/zero of=~/data.img bs=1048576 count=128
mke2fs -F ~/data.img
to make a blank 128 mb data.img file in my home folder
Click to expand...
Click to collapse
- I can now confirm that flashing the nbh with the ruu works from Windows.
- dzo, I have a panel type 3 us sprint vogue. everything booted up fine, the buttons work, but the touchscreen isn't. Will post logcat / dmesg in a bit.
edit: uploaded zip w/ logcat and dmesg
Happy new Year and thank you for yor feedback, I may be late to the party but my work is killing my spare time. So, Iam trying to update the walkrthough to cope with the ongoing developments.
On a side note I've upgraded my xperia to an android device but Iam keeping it for jailbreaking purposes
Lets get it on!
Assuming your device is covered in the compatibility list you have to have the device rooted.
For how to Root (HARD-SPL) Your Xperia X1 check Here!!
Then its a matter of OS, in this thread we are talking about HTC Devices that run WinMo as a native Operating System. This hack works only in Linux enviroment so we need Android to run on the device.
How to run android depends on the particular device so one must go to the respective thread.
For Xperia its this thread
The Froyo Development has stopped but the current version is far superior than what we used some months ago.
In short dowload the xdandroid stuff, put the unrared files on your sd's root and boot through HARET once.
-
We now should be at a point that our device boots normally to The 2.2 froyo android version through Haret. Then we have to replace the module and zImage files with the PSfreedom respective ones plus the psfreedom.ko file. All these should be placed and overriten in the root folder of the SDCard.
Here is the latest Payload for Xperia
(need some help with the changes, but Iam impressed so far with the outcome)
All the preliminary work is done, now for the ****ty "do this everytime you wanna play back ups" job
Assuming the phone is off...
Turn it on
Wait for winmo to boot then run HARET from the device's file manager
Wait till android fully boots and navigate to the menu->DevTools->Terminal Emulator
in the terminal you must enter the following lines...
su(enter)
cd(space)/sdcard(enter)
insmod(space)psfreedom.ko(enter)
Click to expand...
Click to collapse
At this point the phone is ready
Pull out the power cord of the PS3 (or flip the backswitch to off)
insert the phone at the first usb port (preferably with the shortest USB cable you can find)
flip the switch or insert the power cord
wait 3 to 4 seconds
press power on followed quickly by eject
you should hear 3 short blips
it takes 5 seconds for PS3 to boot
and DONE.
if it doesnt succed just repeat the process. if it never suceeds then you don't run @ 3.41 FW
[UPDATE#0] I Updated the PSFreedom Files link from the "Homebrew only" Free version to the Backup Enabled "Full" Version. Still Ver 1.0 though...
[UPDATE#1] It definatly needs 4,5 tries, I cannot get it to work in the first try...
[UPDATE#2] Everytime I try to run a backup my FAT PS3 Freezes... and to think I came this close...
[UPDATE#3] Stupid me, didn't check it out in the above compatibility list... tried another one works like a charm
[UPDATE#4] If you are 100% sure you did everything right and still you cannot perform the exploit on the console you should not turn off the device and boot it again, you can have it in terminal mode as long as you wish and perform the exploit on the PS3 again and again... This is also usefull when the console freezes or crashes, you just perform the power cycle only!!
Well There goes one day of my life I think I covered more than the basics, If you thing I helped you I would appreciate a line or two
[UPDATE#5] Went out today and felt like spending 300 Euros, got my self a Slim one. I will be testing it later today...
[UPDATE#6] I found out that the PS3 Slim model has a much greater success rate for the hack to work. Also, I tried all the steps and bypassed the active sync stuff and I can confirm that by bypassing it, IT WILL NOT WORK
[UPDATE#7] 5 Days into this and 3 with the slim model, slim works better BUT, the problems occure because of the xperia hardware/xdandroid port... it works but not always, its nerve wracking I know, so do the Developers of PS Freedom as they updated their wiki Raphael page page in the problems worning section.
aaaanyway, Tomorow Iam upgrading my HDD my old one is full.
[UPDATE#8] 11 days later and I have updated my fat ps3 to 3.42 and kept my slim hacked. Its a tedious work to enable every time xdandroid and the psfreedom hack but as I said it is free, anyway, having the slim console AND a very short cable (mine is 10cm) works EVERY SINGLE TIME, no probs with that. I had though 2 issues of console freezing... I don't know if it is the hack or my new HDD (7200rpm) nothing serious though...
[UPDATE#9] I've tried to replace the active sync step and connected the device to ps3, first time it worked, second time it failed...
[UPDATE#10] Well, thats it for me, I could no longer cope with the tedious steps in order to play for an hour, I've bought a jailbreak clone and flashed my xperia with a diffrent rom and formatted my SDcard. for the time being, Iam no longer using the Raphael hack...
[UPDATE#11] As it turns out my jailbreak clone is not upgradable (it was damn cheap after all). Anyways, I browsed to PSFREEDOM.com to see the development of the raphael hack and to my surprise i found out two things...
a) This thread is hotlinkedvia this page http://psfreedom.com/wiki/Sony_Ericsson_XPERIA_X1, which is kinda cool I guess...
b) I found out (probably need to read my thread a little bit more ) that more recent hermes payloads are been released for xperia...
So, I will refresh any broken links, start again, and keep updated this first post agains the willings of our beloved sony
[Update#12] The true reason that I returned is that my fat PS3 pulled a YLOD on me and left me empty handed this holiday season, so I dusted off my jailbreaked one
Click to expand...
Click to collapse
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
ldghn said:
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
Click to expand...
Click to collapse
The same thing happened with me the first few tries, this message means that the process is not right, I solved this issue by re formatting xdandroid again and carefully placing and overrighting the files...
When you are 100% certain that the procedure is right (according to my walkthroug) then its only a matter o timing... keep trying mate.
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
ldghn said:
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
Click to expand...
Click to collapse
I think its very clear that you have to boot on android at least once with the original files....
(the initial install and calibration)
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
ldghn said:
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
Click to expand...
Click to collapse
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Jim P said:
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Click to expand...
Click to collapse
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
ldghn said:
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
Click to expand...
Click to collapse
Then you didn't do the exploit... back to the drawing board my friend
Thank You soo much! It works on first try
error
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
What I have gathered together in this walkthrough is what many people suggested and some other people including me found usefull and working.
You probably don't have the proper file arrangement in your SD card
and the actual command line is "cd sdcard" to access the sd card and thed "cd andboot" to access the "andboot" folder where the PS Freedom files reside.
hope I helped
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
hi mr i while insert cd andboot write in terminal can't cd to andboot and while connect to ps3 write an unknwon device is connected please help me thanks
teksound said:
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
Click to expand...
Click to collapse
yeah. earlier I placed EVERYTHING in the root instead of making a folder called "andboot" so I'm going to do that again and see what I get. I think it's a bad psfreedom.ko file.
People...
When you installed xdandroid on your xperia the guy who made the port said that you have to create an andboot folder to place the android kernel inside...
so by default you have an andboot folder.
then its a matter of overiting 2 files there... simple as that.
Finally i did it
It works for me now
Perhaps i am stupid, but i cannot get it to work. This is how i do it:
Copy the android files to the sdcard and boot it in the phone with the haret.exe (takes a loooong time to boot). Reboot the phone back to WM, copy over the files module and zImage file, boot back into android with haret, startup terminal, write in the commands and so on. I start up the PS3 as instructed but i only get the message unknown USB and I cannot see any install pkg file.
I have tried and read all the instructions but I cannot understand what I am doing wrong, anyone have a tip?
helps needed
i have been trying make it work all day with no luck. mine is a uk version X1 with original rom. i followed instruction step by step and even reinstall the andriod port several times. however, still not working. always appear unknown usb device on ps3 screen. the only thing i didnt do is that flashing the SPL. is it a necessary step? what's the purpose for flashing the SPL?
actually, the module files from android and the one from psfreedom didn't have the same name... is this an issue ? witch name we have to keep ?
thx for the tuto !
Ok, so following on from the MeeGo thread, I have Ubuntu booting on the Nexus S using the same method and same kernel.
The Ubuntu image used is the HD2 Ubuntu image (v 0.3), loaded from a file on the internal memory (again, no flashing required - you can thank me later).
The touchscreen isn't yet working, but that's my kernel at fault. Will fix that with the MeeGo stuff.
If you want to try this yourself, first grab yourself a copy of Ubuntu for HD2, and take just the rootfs.ext2 file and drag it to your Nexus S (put it in a folder called 'ubuntu' - lowercase is important!).
Then use fastboot to boot the following image (or flash it to recovery partition if you're daring and know how dangerous that can be):
http://dl.dropbox.com/u/8657343/bootUbuntu.img
You will need to do one minor edit once the device is booted; you will see the screen output is very weird; ADB push the following file to /etc/X11/xorg.conf, and then reboot Ubuntu:
http://dl.dropbox.com/u/8657343/xorg.conf
If you're in any way interested, please click the thanks button! Otherwise, enjoy!
nice!
the next thing we'll need after getting the touch screen working
is to have a calling app daemon, and make sure internet works on both 3G and WiFi
nice, look same at Ubuntu Netbook Edition
What about Galaxy S?
Njcki said:
What about Galaxy S?
Click to expand...
Click to collapse
In theory the same stuff should work; I don't have a Galaxy S to test on or I'd try it. I don't know anything about the Galaxy S' bootloader, or how much the kernel would differ (I'm guessing not at all, since this is a stock Samsung kernel from the Android kernel source)
I did an article on my site http://www.android-ita.com/dev-port-di-ubuntu-sul-nexus-s/
Maybe some italian devs, will help you
Thanks for this, gonna have a play now
Why is it dangerous to flash the boot image to recovery? Isn't fastboot lower level than recovery, or have I got that wrong?
nice, thanks. trying this as soon as my wife gets off my phone.
Oh my god.. You are awesome good sir. Will give it a run when touch is up and running!
I'd love it to be run from Android....i dont want it natively, just to test it...booting for example from an android app
I would love to know if this will work on Epic 4G. I'm going to give it a shot to see what happens.
Great job
Could you give us the sources of your kernel ? Is it patched ?
Tyruiop said:
Great job
Could you give us the sources of your kernel ? Is it patched ?
Click to expand...
Click to collapse
There are no changes to the kernel at all so far. I changed the config file to enable VTs, that's it.
Ok, thank you, I'll try to build one myself
can this method be used to install android 2.3 on a phone running android 2.1,
especilly in the case when upgrading is difficult because of kernel and locked bootloader (like motorola devices) ? excuse me if it is a silly question, i'm not a coder.
would it be possible to make an app that re-boots into fastboot and runs the fastboot command. since we dont always have a comp available to run fasboot which makes this useless if your not at home, or have a laptop (in which case you dont need ubuntu on a phone)
works on Nexus One right now ?
--> ok I'm trying
It blocks on X screen of my nexus one.. before the classic bootanimation.zip
Someone have any idea about that ?
Ok, so I've got wifi working . Here is my solution. A little bit crappy but... hey... it's a start ! Also, I tried compiling the kernel with the module built in and it wont boot, and I don't know why ?
Howto get wifi :
1) Boot Ubuntu following stroughtonsmith indications
2) Download http://tyruiop.org/~tyruiop/wifi_nexuss_ubuntu.tar.bz2
3) push the vendor directory at the root. The path must remain (/vendor/firmware etc...) and the bcm4329.ko file wherever you want.
4) reboot under ubuntu
5) *optional, only if ifconfig -a doesn't show eth0* type insmod /path/to/bcm4329.ko
6) Type "ifconfig -a". An eth0 interface should appear. It's wireless. You can configure it with wpa_supplicant without a problem .
Uhm.. with Nexus One, Ubuntu blocks on X SCREEN (before the classic bootanimation).. Maybe something that I do is wrong ?
- Download HD2 Ubuntu
- mkdir ubuntu/
- put in ubuntu/ the fs on the archive I downloader
- put ubuntu/ in the SDCARD
- adb reboot bootloader
- fastboot boot bootUbuntu.img
Is it correct ?
First, please forgive me if this is posted in the wrong section. It seemed most appropriate.
Second, I take no credit for anything here except for writing the .bat file here used to do the work, as well as assembling the files as per the original post.
All credit goes to djmwj and his article found here:
http://rootzwiki.com/topic/8722-lenovo-ideapad-k1-rooting-guide-messy/
As the title states, it was very messy. The OP figured out how to make it go, but it was a bit fuzzy to follow. So, I thought I'd help folks out a bit and clean things up.
So, I took the instructions presented in the OP, and condensed them into one download with one .bat that does everything from start to finish, minus installing the respective drivers for ADB and NVFlash. However, the drivers are included in the download.
Instructions:
1. Extract K1Root.rar to the directory of your choosing.
2. Connect your tablet to your PC with the USB cable.
3. With your tablet off, press POWER+VOL_UP+VOL_DOWN until the screen turns on, but displays only black.
4. Windows should detect the device, but not install drivers.
5. Go into device manager, select the APX device, choose update drivers, and install the drivers from the aptly named NVFlash_Drivers folder.
6. Open up the NVFLASH_HOME folder and run the file K1Flash.bat
7. Make your desired choices when prompted, and enjoy.
Notes (PLEASE READ BEFORE USING):
THERE MAY BE BUGS! I used it on my own stuff before releasing, and all of the essential components work as they should, however, there may possibly be a minor hiccup somewhere in the script. This should not damage anything. If you have doubts, you're welcome to examine the .bat and check it for yourself.
Please be gentle. I am not a full-time developer. I just wrote this to help make the process simpler for people.
The OP suggests you download and read the partition table, and then name the backup files based on that. This script names the backup files based on the flash.cfg script referenced in the OP, which is what controls the flashes used anyway. So, there shouldn't be any irregularities, however, I can't speak for every device on the planet.
This does NOT use the latest OTA updates. The rooted files being flashed are the default ones from the original download. You can easily adapt this to any files generated from the latest OTA files by simply dropping them in the NVFLASH_HOME file.
To install the SU properly, you have to install ADB drivers midway through the script. There's probably a way around this, but I didn't find it to be too inconvenient.
The ADB drivers are also located in the NVFLASH_HOME folder. Just do like you did when installing drivers in step #5, but instead point to NVFLASH_HOME.
Um...um...
That should be it. Obviously, use at your own risk. Let me know if there are problems with the script, and I will fix them.
Oh, and party on, Wayne.
http://www.megaupload.com/?d=AG10XE25
EDIT:
Attached is an updated .bat file which fixes a few errors in the original script, plus adds more userability. Just extract to the NVFLASH_HOME folder and run.
digitalhigh said:
First, please forgive me if this is posted in the wrong section. It seemed most appropriate.
Click to expand...
Click to collapse
You may want to change the title to Ideapad K1, I don't know if this will work for the Thinkpad tablet.
Thanks for this, I just picked up this tablet ($250 at staples) and was worrying about having to tackle linux and "compiling" just to be able to get hulu.com working. You're a lifesaver.
gallahad2000 said:
You may want to change the title to Ideapad K1, I don't know if this will work for the Thinkpad tablet.
Thanks for this, I just picked up this tablet ($250 at staples) and was worrying about having to tackle linux and "compiling" just to be able to get hulu.com working. You're a lifesaver.
Click to expand...
Click to collapse
Wow. Yeah, I'm pretty sure the key used is just for the Ideapad. Thanks for pointing that out. My dumb a$$ must've blanked out and just used the group name when posting.
And just to be fair, the original poster does include everything needed to do stuff in windows as well - it's just very hard to discern from the post.
question
Is anyone working on a custom ROM for this tablet? I am hopeing that there will be at least a few custom roms available at some point in the near future.
jfkerekes said:
Is anyone working on a custom ROM for this tablet? I am hopeing that there will be at least a few custom roms available at some point in the near future.
Click to expand...
Click to collapse
We need to be able to root and unlock the bootloader first.
Does the root method work on the 121211 update?
Or is there a way to flash back to the older firmware?
the OTA update 12 12 11.... seems to be update.zip style with no .img files inside. just loose files like normal rom updates. doesnt seeem like you can drop the files in as suggested. or i have the wrong OTA....
oh and is this for LINUX as the OP or work in windows too??
Hi, I was wondering, is this procedure works for the Lenovo ThinkPad 1838-25U? I'm thinking to buy it to give a test ride, i sold my Transformer 101 to buy the Prime but it seems like Asus is taking vacations on the delivery shipments. Is this a good tablet? or is better to wait for another version?
READ THE POST
IDEApad not THINKpad. no it wont work.
First of all- thank you so much for creating this script! I have been putting off rooting this device due to the "messy" nature of the original post.
I was hoping you could help me troubleshoot, I have tried both the new K1 root application and the original .bat file. I know the drivers are working because the script makes it as far as creating and formatting partitions and successfully pushes the bootlooder.bin but then:
bootloader.bin sent successfully
file not found: recovery.img
failed executing command 2147483647 NvError 0x4
command failure: create failed
I've tried everything I can think of... any ideas?
Thanks again.
I found problem.
after root done follow step. I cannot factory reset and update any ota.
anyone can help me ?
taiz said:
I found problem.
after root done follow step. I cannot factory reset and update any ota.
anyone can help me ?
Click to expand...
Click to collapse
Yes you have to roll-back to 04 stock and then apply the OTA's
Backup of the stock lenovo .apks!
File 1:http://www.mediafire.com/?r7iskr3wrfx4u01
File 2:http://www.mediafire.com/?fymdv9e9kmj332s
File 3:http://www.mediafire.com/?w33k205ej4fpbcl
A big thanks to Khanning who was nice enough to walk me through the adb commands and bear with me when I couldn't get adb over usb to work.
This may fix your issues http://forum.xda-developers.com/showpost.php?p=21309379&postcount=50
Can someone help I used this and I installed drivers from the drivers folder fine ....I ran option 1 fine and it said completed but said something about nvflash error make sure drivers are installed ....but on my tablet it said phone update success ....when I try option three to flash image it just stays at nvflash started and goes no further and when I try to install Su it won't connect adb , probably cause adb drivers wouldnt install ....any advice ....device is booting and seems stock ....it did not wipe my files either
Sent from my HTC EVO 3D X515a using XDA App
maek_it_happen said:
Can someone help I used this and I installed drivers from the drivers folder fine ....I ran option 1 fine and it said completed but said something about nvflash error make sure drivers are installed ....but on my tablet it said phone update success ....when I try option three to flash image it just stays at nvflash started and goes no further and when I try to install Su it won't connect adb , probably cause adb drivers wouldnt install ....any advice ....device is booting and seems stock ....it did not wipe my files either
Sent from my HTC EVO 3D X515a using XDA App
Click to expand...
Click to collapse
It means you are not in APX mode. Read the PDF and follow the instructions for installing the APX drivers. This should fix your issues.http://forum.xda-developers.com/show...9&postcount=50
I just completed step 3 flashing the image went fine up to bootloader .bin sent successfully ...then it says
File not found recovery.img
Failed executing command 2147473647 Nverror 0x4
Command failure : create failed
Edit the link u posted is not working and the drivers are installed
Edit 2 I just downloaded ur v2 root tool in ur other thread ....for some reason ur flash me Command actualy went past the recovery img error I was having with this tool .... But yours is flawless
Sent from my HTC EVO 3D X515a using XDA App
maek_it_happen said:
Edit 2 I just downloaded ur v2 root tool in ur other thread ....for some reason ur flash me Command actualy went past the recovery img error I was having with this tool .... But yours is flawless
Click to expand...
Click to collapse
Glad to hear it worked for you.
TD
I recently got this device and looking for a way to root this device without having to roll back to the factory default rom and then having to update again using OTA.
Question, am I in luck, is that at all possible or do I have to really rollback and reinstall everything again?
Thanks!
Sent from my K1 using Tapatalk
Anyone have the root? Megaupload is down forever.
Welcome to the CM10.1 for the Lenovo Ideapad K1
Legal disclaimer: I'm not responsible if you brick your tablet, or have other damages in the process.
Features:
Multi User support (max. 5 User)
WIFI
Overclocking ( max. 1,4 GHz)
GPS
Bluetooth
Camera front/back
HD video/audio
externe SD-Card
USB-Stick support
Gyro
Auto brightness (bugy)
Hardware / Software Rotation Lock
VPN Support
3G support
Home button
CWM 6.0.3.3
Install Procedure 1
You come from CM10, no wipe needed
1. Download Update and Gapps and save to SD card
2. Reoboot into Recovery Mode
3. Once in recovery, select the update file to be flashed
4. select the gapps file to be flashed
5. Reboot
Install Procedure 2
You come from a stock or other CM version
Full Wipe, all data will be gone
1. Download the nvflash and save it on your PC
2. Power down and enter APX mode on your tablet, with the USB cable connected to the PC
3. Run flash-win.bat or flash-linux.sh (depending on what your PC runs)
4. After table has booted, enter settings and select about tablet. touch 7 time on build number. Your developer option are visible.
5. Go to settings, Developer options and select Advanced reboot
7. connect your tablet to the pc and save gapps on your sd card. Or download gapps via liink.
6. Go in Recovery via long press of Power, and select "Reboot" then "Recovery"
5. Flash the gapps package that you downloaded in step 1.
6. Reboot
Downloads:
First update 3G Version or
NVFlash 3G or Mirror
First Update Wifi Version or
NVFlash Wifi or Mirror
Important. Only that Gapps version will work !!!
Google Apps alias GApps or Mirror
Current Releases (date 2013-09-26):
Wifi Version
3G Version
Bugs:
light sensor (never worked correct)
Wifi (works just with "keep Wi-Fi on during sleep, always")
Headset detection
Credits:
KHanning
Krook1
Breeder (Testing)
Koshu
and finally Codeworkx for so many tips !!! :good:
Info / Tips
- Developer settings: go in settings and select about tablet. Press 7 times on build number
Recovery Update
The Recovery will be updated with nightly version of the 18-07-2013.
Awesome work buddy !!. Downloading it. But will flash over the weekend.
Thanks for continuing work on this device.
Nice work! I've flashed it yesterday when you posted it on goo.im and it's running nice so far. Got sod but I put wifi to always on, anyways it doesn't seem to drain too much battery. Also maybe you should update the recovery as this one cause 0 folder nesting when flashing(I got emulated/0/0/0...) and this is repaired with newer recovery, I don't remind wich number. Everything else seem to be working perfectly, some little strange thing but I think it's due to CM nighlties and could be working correctly later. I'll thank you so much for keeping our device alive. Keep it going.
Edit: The recovery issue is fixed since cwm 6.0.2.3 and we got 6.0.1.1 so that's why it's nesting but that isn't dangerous or anything, it can be deleted and the data are simply at the bottom of the 0 folders tree.
kaschemme said:
Welcome to the CM10.1 for the Lenovo Ideapad K1
Click to expand...
Click to collapse
Thank you, kaschemme! Will download and flash when I get home as my tablet does not have too much data. THANK YOU!!!
ti-pich said:
Nice work! I've flashed it yesterday when you posted it on goo.im and it's running nice so far. Got sod but I put wifi to always on, anyways it doesn't seem to drain too much battery. Also maybe you should update the recovery as this one cause 0 folder nesting when flashing(I got emulated/0/0/0...) and this is repaired with newer recovery, I don't remind wich number. Everything else seem to be working perfectly, some little strange thing but I think it's due to CM nighlties and could be working correctly later. I'll thank you so much for keeping our device alive. Keep it going.
Edit: The recovery issue is fixed since cwm 6.0.2.3 and we got 6.0.1.1 so that's why it's nesting but that isn't dangerous or anything, it can be deleted and the data are simply at the bottom of the 0 folders tree.
Click to expand...
Click to collapse
Where can I get this recovery file to flash on my tablet? Thanks! :good:
Mordred69 said:
Where can I get this recovery file to flash on my tablet? Thanks! :good:
Click to expand...
Click to collapse
It isn't made for our device yet so we can't flash it. It need to be updated and compiled from the rom source then it can be flashed so for now we have to live with this version.
Way to go!!
On goo.im for devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
"The file you requested was not found. Lets see if we can find that for you..."
Mordred69 said:
On goo.im for devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
"The file you requested was not found. Lets see if we can find that for you..."
Click to expand...
Click to collapse
There isn't nvflash folder in kaschemme. For me kaschemme/CM10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip download without any issue.
Hey, kaschemme, thanks so much for the update! I am looking forward to giving it a try, although I do use the USB Storage function a lot (it's the easiest way to copy movies onto my K1), so I might wait until after my vacation to do the update. I'd also like to see how the GPS functions are working, since I use my K1 a lot when I go geocaching. But it's wonderful to see that the K1 is still moving forward! :good:
K1Andy said:
Hey, kaschemme, thanks so much for the update! I am looking forward to giving it a try, although I do use the USB Storage function a lot (it's the easiest way to copy movies onto my K1), so I might wait until after my vacation to do the update. I'd also like to see how the GPS functions are working, since I use my K1 a lot when I go geocaching. But it's wonderful to see that the K1 is still moving forward! :good:
Click to expand...
Click to collapse
USB connection to a computer do work for me on ubuntu 13.04 better than it ever worked. I think by USB storage he is meaning USB OTG, like plugging a usb key directly in the K1 with the almost inexistant lenovo adapter.
ti-pich said:
USB connection to a computer do work for me on ubuntu 13.04 better than it ever worked. I think by USB storage he is meaning USB OTG, like plugging a usb key directly in the K1 with the almost inexistant lenovo adapter.
Click to expand...
Click to collapse
Right, USB host support (attaching a USB flash drive to the K1) is exactly what I mean, and what I use. I was fortunate enough to get one of those non-existent adapters.
ti-pich said:
There isn't nvflash folder in kaschemme. For me kaschemme/CM10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip download without any issue.
Click to expand...
Click to collapse
The problem is the NVFlash links.
The file is not at http://goo.im/devs/kaschemme/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
The file is at http://goo.im/devs/kaschemme/cm10/nvflash/nvflash_CM10.1_Wifi_Kaschemme_v1.zip
Means it is inside the CM10 directory (linkage truncates whole sentence)
Thanks, ti-pich! Thanks Kaschemme!
K1Andy said:
Right, USB host support (attaching a USB flash drive to the K1) is exactly what I mean, and what I use. I was fortunate enough to get one of those non-existent adapters.
Click to expand...
Click to collapse
You are really lucky then, this is probably the only thing missing on this tablet, and that's why I'm waiting for google to release their nexus 7 full hd with a regular micro usb. Anyway, sorry I misunderstood what you said.
Kaschemme,
nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt. Downloaded 4 times.
Great job Kaschemme!
So far all my apps that I have reloaded are working. Thanks for your hard work.
Mordred69 said:
Kaschemme,
nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt. Downloaded 4 times.
Click to expand...
Click to collapse
I downloaded it, and it does appear to have the correct MD5 hash signature, but if I try to open or extract it using Windows Explorer, I also get a message that it is invalid or corrupted. However, if I use 7-Zip, it seems to open and extract with no problem. Perhaps it was built using some type of zip compression that isn't supported by the built-in Windows compression tools?
K1Andy said:
I downloaded it, and it does appear to have the correct MD5 hash signature, but if I try to open or extract it using Windows Explorer, I also get a message that it is invalid or corrupted. However, if I use 7-Zip, it seems to open and extract with no problem. Perhaps it was built using some type of zip compression that isn't supported by the built-in Windows compression tools?
Click to expand...
Click to collapse
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
hei Kaschemme.
thanks u so much!!!
this rom run so well.. the performance got better from the previous one.
i dont found any bug yet, but i read ur first post, that there is a bug on Headset detection...
let me try when i got home
anyway, great job!
Edited :
i just try to plug my headset on my K1..
And it works well..
So up to now, i dont found a bug yet...
Cool!
Mordred69 said:
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
Click to expand...
Click to collapse
Take a nandroid backup and try doing a clean flash (factory reset then flash), in case you did a dirty flash.
Mordred69 said:
Thank you. I was using winrar which is what I always use. In any case, I flashed this rom's cwm version over krook1's nvflash starter v2 and it worked, but gives me the same errors as krook1's version 6.1, which are random apps closing with no explanation whatsoever... Not even a "sorry, xyz app has forced closed" message. Keep in mind this is a fresh install.
This flash also started complaining that email had closed right from the start, too. I hope this helps you guys...
Click to expand...
Click to collapse
Would you please let me know which version of 7-zip you used to extract the files from nvflash archive?
I tried 9.20 and 9.30alpha and both give me 'unsupported compression method'
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2