[Q] Receiving Server Error after Secure Full Erase - TouchPad Q&A, Help & Troubleshooting

About a week ago I did a Secure Full Erase on my 32GB HP Touchpad.
Then after finishing it rebooted and I started going through the initial setup. I select English then United States and then confirm that is my selection. I then get taken to the Wi-Fi Setup screen, in the background I can see the HP Terms & Conditions, where I select my network and type in my password. For about 1/2 a minute it sits there and states "Cannot connect to the internet through this connnection. Try another network." It then decided it will go but then I receive a Server Error which says "Please visit http://hpwebos.com/support to help resolve this problem". I have tried this multiple times many different ways. I've used other networks and even tried making mine unsecured. I've tried selecting different languages and countries. I've tried using WebOS Doctor which did the reinstall of the WebOS 3.0.4 and even tried going back to 3.0.2 but same thing.
I've been working on this now for the past 8 hours and have tried everything that I have came across out there on the net.
Anyone else have any other ideas?
Any help is welcome.
Thanks.

Well... 100 have checked out my post and yet to have any ideas.
I really just want to get it up and running so I can run Android on it.
Sent from my SPH-D710 using xda premium

The wifi does not seem to work with certain configurations of WPA2 on the setup screen.
Set your router to wpa TKIP (or weaker) and reduce the speed to 54 mbps. I am not sure which on of these fixes it but it does. Once you are setup you can put the router back to WPA2 and it works.
Took me a while to figure that out on my system include modem resets.
BTW I have a netgear wndr3700 as my primary router, do you happen to have the same?

That worked!!! Can not believe that is all it took was to drop the speed to 54mbps, I didnt change the security. And yes I have the exact same router.
One thing I did notice is when I switched my router back it would not connect to the system related sites like System Update and App Catalog. So what I did was use the fact that the router is a dual band to set up a second signal with the lower speeds, was not using the 5Ghz band anyway, so this way the lower speeds would not affect when I stream to my Epic Touch or my SqueezeBox.

I'm having same problem how do I fix it

Related

[Q] Wi-Fi Woes

Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
When you have wifi on, go to menu settings and 'Wireless and network'. In Wi-Fi settings you can change the Wi-Fi timeout.
nickbarbs said:
Ok I have a very iritating problem.
My captivate works amazing in all ways... except one. When I'm at home connected to Wifi, within a few mins of me putting the phone down, or even mid use, the wifi will just stop working. The icon still shows it to be connected however no apps are able to actually get internet. A quick pulldown of the quick access menu and tapping wifi off and back on again gets it going great... for another 5 mins. Then the same thing happens.
Its been like this ever since I got the phone, even after flashing different roms. Now i'm running a Linksys Wireless - N router - maybe they're not playing nice?
I dont think its a hardware fault because when I serve wifi, IE the captivate is an infrastructure mode access point for 3g, it stays on consistently and my laptop can tether for 2 hours or more.
Anyone know what might be causing this?
Thanks
Click to expand...
Click to collapse
Try goin to settings->wireless and networks-> wifi settings (menu key)advanced and set the sleeping policy to never
I've done that...
i *Think* i've fixed it. I was using WPA2 IPK encryption or whatever.. Switched back to the 64 bit crappy WEP. Wifi was on all night and all morning with no cut out.
Might be just another linksys-is-crap situation.
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
gluvox said:
HI, I figured I keep my wifi woes within a singe thread so.
I have an old D Link WBS 2310 router.
I recently got a message from AT&T that I'm near my data limit. This surprised me as my last cycle I barely got near 500mb. Since my bill isn't ready yet, I can't see exactly what it is I'm doing to use so much data.
TO be safe I figured I'd pull out my old router and set it up. After hours of hassle getting it to work on my new computer, I wasn't able to get my Captivate to hook up to it.
My laptop works fine. It gets a fast wifi signal, but my phone just says "Obtaining IP address" for a while and then gives up.
My phone gets wifi at work, at friends', at coffee shops - but not at home.
I've tried this with no encryption, WEP encryption and WPA2 encryption.
Each time my laptop would hook up to the wifi but my phone wouldn't.
I searched some other forums and found similar problems with HTC phones.
Some answers say that D Link sucks. But that answer applies to other brands as well.
Do I need "n" wifi, rather than "g"?
I don't want to buy another router only to find it still doesn't work.
Any help?
Click to expand...
Click to collapse
part of the IEEE 802.11n standard is backward compatibility with all previous 802.11 standards IIRC, so there should be no need to buy a new n device.
HOWEVER, i am also having issues with my wi-fi and my g capable router. i will meddle around with some phone and router settings to see if i can fix this, this is one area were i can actually be of some use on this forum
Hi. It turned out the wifi was broken on my captivate. I reset it to stock and it's all better. It had been working up to the previous day so I assumed that it was still working. The router goes down intermittently in general, so I've ordered a new one to see what's up.
Hi, I'm back! So after resetting the phone and getting wifi to actually connect (rather than being stuck searching for IP address), I'm now having the exact same problem is the OP. The OP seems to have solved this by switching to WEP. I tried this and it doesn't work. My timeout is set to never. Also, it's the same at home (I replaced my router) as well as at Starbucks and a friends house.
I'm connected, but can't download or sync. It works initially and then stops, and then comes back in briefly and then stops, all the while "connected." Sometimes I can fix it temporarily by turning off wifi and then turning it back on.
SO what's the deal? Is it a hardware problem? Is there some secret magic code?
edit: Just disabled encryption - same problem.

[Q] Wifi Sharing on Tmobile Woes

I run CM7 nightlies on my Tmobile N1. Recently I killed my cable Internet/TV connection at home and have been using the built in WiFi tether for my home devices.
While it typically works great (for free), the data on my N1 will lock up. I have full 3G/HSDPA at my house. Using #*#*4636*#*# it states I am connected but fails to ping or load up any data on the phone or through its shared connection.
The only way to fix the problem is to toggle airplane mode and re-enable the WiFi Tether or sometimes a reset is required.
I've changed to several Gingerbread roms, flashed various radios, and even exchanged SIM cards.
Is this behavior normal or not? For regular web surfing I can live with it, but the main problem is that I cannot download anything without it getting interrupted (like updated nightlies or 50mb+ files).
Bumpity
No one has any problems with their WiFi sharing?
i used my phones internet as my regular home internet for a month. i used up about 25 gigs. i streamed videos, downloaded videos and podcasts with no interruptions. don't know what your problem could be. i was using cyan 6.1.1
I occasionally have experienced that issue, but it seems as if you have it much more frequently than I ever did. I would mainly get it when I tethered from areas with bad reception.
You state that you have full 3G/HSPA at your house. I am wondering how many bars of reception you happen to have. Also, try setting your phone to WCDMA Only in that 4636 menu. That seemed to decrease the frequency at which it happened for me.
I also found that once in a while, I could get tethered data working again by simply using the phone's native web browser to access any data. Good luck with the issue.
player911 said:
While it typically works great (for free), the data on my N1 will lock up. I have full 3G/HSDPA at my house. Using #*#*4636*#*# it states I am connected but fails to ping or load up any data on the phone or through its shared connection.
The only way to fix the problem is to toggle airplane mode and re-enable the WiFi Tether or sometimes a reset is required.
Click to expand...
Click to collapse
I typically have full bars of signal usually reading around -100dbm. When the internet drops, it drops completely; maps, browser, apps, etc all fail and I can't "jump start" it other then toggling airplane mode or resetting the phone. Typically a reset is best.
Perhaps I'll flash back to CM 6.1 and test it over the weekend. I'll do a backup of my current setup if things aren't fixed.
The purpose of this thread was simply to see if others have experienced the same issues and if it was worth "trying" to fix.
It might be a case of overheating device - it'll be good to test different ROMs and kernels.
I don't think the device is over heating at all rather then just a carrier issue. I flashed to CM 6.1.1 over the weekend and immediately found I was still having data issues (where it would work for like 5 minutes then drop out).
I did find that EDGE was a solid connection and stayed connected while I downloaded CM7 and GAPPS. I put a call into Tmobile and yacked at them for several hours. They escalated it up several times in their engineering department and so we'll see. I spoke to HTC a few times in there and they didn't think it was a handset problem either.
I guess we can close this thread as it doesn't seem to be a wide spread problem. I am running a stable version of CM7 now and we'll see.
@above: I have tested different radios, roms, and kernels. This thread started out as a issue with WiFi Tethering but ended up being the phone simply dropping its data connection. I originally was curious if this wifi sharing behavior was normal or not.
player911 said:
I put a call into Tmobile and yacked at them for several hours. They escalated it up several times in their engineering department and so we'll see.
Click to expand...
Click to collapse
+1 for this part..
Sent from my Nexus One

Wifi Issues?

Is anyone else having an issue where your device will be hooked up to a wifi network, will still indicate you're connected but no data will sync? I email myself and nothing happens. Happens with FB, Email, Gmail, and Voice Controls don't work.
ShamanicEnzan said:
Is anyone else having an issue where your device will be hooked up to a wifi network, will still indicate you're connected but no data will sync? I email myself and nothing happens. Happens with FB, Email, Gmail, and Voice Controls don't work.
Click to expand...
Click to collapse
I have that issue with my gNex and my wife's DNA on our home network. I don't think it is necessarily this phone, but I am not convinced (yet) that it is my router, either...
TheKaz said:
I have that issue with my gNex and my wife's DNA on our home network. I don't think it is necessarily this phone, but I am not convinced (yet) that it is my router, either...
Click to expand...
Click to collapse
It comes and goes, it looks almost app specific. I say Hello Google Now, and it seems to lock up on recognition or says it can't connect to google....but I'm able to browse the internet.
Yeah I've been having a ton of WiFi issues with this phone.
Slusho said:
Yeah I've been having a ton of WiFi issues with this phone.
Click to expand...
Click to collapse
I called Moto and after dealing with their terrible level 1 support I got the following:
HERE ARE THE INSTRUCTIONS FOR DOING THE WIPE CACHE PARTITION:
This will remove any temporary files that may be causing the problem, but will not delete your files or settings.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to select this option
8. The device will then perform the partition wipe
9. The device will reboot and start the normal power up sequence
Ever since it hasn't had any problems, but it's only been a few hours as well.
The issues started happening again...turned off wifi and everything resynced perfectly...
ShamanicEnzan said:
The issues started happening again...turned off wifi and everything resynced perfectly...
Click to expand...
Click to collapse
Have you tried it on a different router?
Sent from my Nexus 7
phositadc said:
Have you tried it on a different router?
Sent from my Nexus 7
Click to expand...
Click to collapse
I haven't been able to yet, I'm hoping to at work, but my current router works with my laptop and my old HTC
ShamanicEnzan said:
I haven't been able to yet, I'm hoping to at work, but my current router works with my laptop and my old HTC
Click to expand...
Click to collapse
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
phositadc said:
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
Click to expand...
Click to collapse
It was set to auto, I set it to 2.4 ghz...now to wait if it happens again.
phositadc said:
If it doesn't work properly with a different router try exchanging it. Also have you gone into advanced WiFi settings and forced the moto x to 2.4 GHz? If give that a try.
Sent from my Nexus 7
Click to expand...
Click to collapse
The force to 2.4ghz actually made the problem occur a lot faster, any reason it might be due to the massive amount of wifi networks around? When I set to scan 5 ghz there was only one still open, I might go into my router and see if I can change the atenna settings.
EDIT: Turns out if I go to 5 ghz my computer can't connect, but I changed the channel to something less populated in the area to see if that helps.
DOUBLE EDIT: It appears to occur after I'm supposed to get a Facebook notification, at that point I don't get any more notifications....attempting to clear out facebook data and cache to see if that does anything
Try disabling WMM on your router.
drilus said:
Try disabling WMM on your router.
Click to expand...
Click to collapse
Forgive the stupid, but what's WMM short for in case that's not readily apparent?
Edit: I've also noticed the problem is exponentially worse after I upload pictures to facebook
Edit Edit: Found WMM, turned it off, let's see what happens.
I has this kind of issue before and did a cold boot but nothing happaned. so my last option was to do a restore. After that, my WIFI connection got okay again. problem solved :silly:
alicepattinson said:
I has this kind of issue before and did a cold boot but nothing happaned. so my last option was to do a restore. After that, my WIFI connection got okay again. problem solved :silly:
Click to expand...
Click to collapse
You mean full reset? It looks like I may have to do that with the idle battery drain issue anyways....so that's the last resort.
Hey guys I'm having a similar issue with my moto x on the 2.4ghz band. Speeds are very slow and sometimes cut out completely. Im getting a download speed of about 300kb/s on 2.4 both on auto channel and it doesn't rlly change once I change it manually to an open channel using WiFi analyzer app. My download speeds on 5ghz hit 4000kb/s even with a much lower signal strength.
YouTube and Netflix is unusable and growing the internet sucks. I usually just use the 4g network while at home cuz its a thousand times faster but I'd like this to be fixed regardless. Has anyone found a solution or explanation?
2.4 ghz wifi issues
matt87n said:
Hey guys I'm having a similar issue with my moto x on the 2.4ghz band. Speeds are very slow and sometimes cut out completely. Im getting a download speed of about 300kb/s on 2.4 both on auto channel and it doesn't rlly change once I change it manually to an open channel using WiFi analyzer app. My download speeds on 5ghz hit 4000kb/s even with a much lower signal strength.
YouTube and Netflix is unusable and growing the internet sucks. I usually just use the 4g network while at home cuz its a thousand times faster but I'd like this to be fixed regardless. Has anyone found a solution or explanation?
Click to expand...
Click to collapse
I'm having these issues too. Got the GSM Developer Edition on 11/29. It immediately updated to Kit Kat OTA so I'm not sure whether it had the issue prior to Kit Kat or not. This only happens on 2.4 ghz wifi and only with one of my routers at home, a Netgear WNDR3700v2 running OpenWrt Attitude Adjustment (I tried upgrading from Backfire to see if it would help, it did not). The other router is a Linksys WRT350N and when the phone is connected to that one the problem does not happen. Note, that there are 2 laptops, a Samsung Galaxy S2, and a Kindle Fire HDX that have zero problems with the WNDR3700. All can transfer data perfectly fine and at high speeds. Thus I do not think the router is bad. Have not checked work routers. 5 ghz wifi is totally fine and indeed very good with this phone.
For me, the problem is that the phone seems unable to receive data at high speed (over 1Mbps) on 2.4 ghz wifi in any area where the signal isn't perfect and sometimes even in the same room as the router (although usually it is fine there). Oddly in many cases when it has trouble receiving it can send data much faster. It almost seems like it might be some kind of interference as it is rather random.
At this point I'm wondering if the phone has a defective 2.4ghz subsystem, though that seem unlikely due to good transfer with the WRT350N, or if this is some kind of wifi tuning software bug in the phone.
Any info would be appreciated. Does anyone have this issue who did not have the issue on Jellybean? Am wondering if anything changed with wifi for the update? Note, I have tried clearing the cache in recovery as noted in another thread with no luck. Anyone have the WCNSS_qcom_cfg.ini file from Jellybean for this phone? Would rather not reflash just for 1 file.
Thanks.
glimmer00 said:
I'm having these issues too. Got the GSM Developer Edition on 11/29. It immediately updated to Kit Kat OTA so I'm not sure whether it had the issue prior to Kit Kat or not. This only happens on 2.4 ghz wifi and only with one of my routers at home, a Netgear WNDR3700v2 running OpenWrt Attitude Adjustment (I tried upgrading from Backfire to see if it would help, it did not). The other router is a Linksys WRT350N and when the phone is connected to that one the problem does not happen. Note, that there are 2 laptops, a Samsung Galaxy S2, and a Kindle Fire HDX that have zero problems with the WNDR3700. All can transfer data perfectly fine and at high speeds. Thus I do not think the router is bad. Have not checked work routers. 5 ghz wifi is totally fine and indeed very good with this phone.
For me, the problem is that the phone seems unable to receive data at high speed (over 1Mbps) on 2.4 ghz wifi in any area where the signal isn't perfect and sometimes even in the same room as the router (although usually it is fine there). Oddly in many cases when it has trouble receiving it can send data much faster. It almost seems like it might be some kind of interference as it is rather random.
At this point I'm wondering if the phone has a defective 2.4ghz subsystem, though that seem unlikely due to good transfer with the WRT350N, or if this is some kind of wifi tuning software bug in the phone.
Any info would be appreciated. Does anyone have this issue who did not have the issue on Jellybean? Am wondering if anything changed with wifi for the update? Note, I have tried clearing the cache in recovery as noted in another thread with no luck. Anyone have the WCNSS_qcom_cfg.ini file from Jellybean for this phone? Would rather not reflash just for 1 file.
Thanks.
Click to expand...
Click to collapse
For what it's worth I have this same Netgear router and have had the same connectivity issues on both 4.2.2 and 4.4.
I did some reading today and found a couple possible fixes I plan on trying out. First one is to disable WMM. Secondly I found on the official netgear forums that they have had major issues (some of which you've described) with all firmwares ending in the .30s and went so far as to pull them from their download section.
My router was running firmware .36 and I successfully downgraded it to the latest stable firmware .12 that netgear now recommends.
Hopefully 1 of those 2 fixes improves the performance, at any rate I really think it's something with the router itself and not the moto x.
Sent from my XT1060 using xda app-developers app
Thanks for letting me know this was also an issue on 4.2.2. Saves me the trouble of flashing back just to test.
I will be interested to know if your using official netgear 1.0.0.12 firmware fixes the issue for you. I haven't actually ever used the official firmware as I've run OpenWRT since I got the router a year or two ago. 10.03.1 had the issue, and it appears 12.09 does as well. I may try a trunk build at some point to see if that changes anything.
I had previously written that all was well on the 5 ghz band. This appears to not be 100% correct. Yesterday evening and this morning I found myself "connected" to the 5ghz band without actually having working internet. Toggle wifi on/off fixes it, but I shouldn't have to do it.
Not sure if this helps, but on the 2.4 ghz side things do work better on one side of the house vs the other. Also it seems that I can get a very fast connection at times and then it stumbles and gets stuck going under 1 Mbps. I still suspect either a defect or some kind of low level radio issues with the moto or the router regarding interference from neighboring wifi access points (there are a lot around me, single family houses on small lots). However, keep in mind no other device has these issues but the moto. In the rare instance I venture into a bad signal pocket the signal indicator goes down and speed slows or they lose connection vs the moto where it can show excellent signal and have no/nearly no connectivity.
I haven't tried it for long, but switching to wireless g mode vs ng may improve stability though I only briefly tried it. I did walk around part of my house checking the Mbps with the app "WiFi Speed Test" and while way slower than N mode it was far more stable. Even if this does work it is a definate downgrade in speed though.
Well its only been a day or two so it may be too early to tell, but so far my wifi seems much better after making those two fixes I mentioned above. This is on 2.4 band, the 5ghz band doesn't provide me enough signal strength to use all the time (router is too far from my bedroom).
The main issue I was having was my wifi signal would cut out even though it still showed a good connection. I could swipe down on the status bar and see no download arrow next to the wifi icon so I knew I wasn't receiving data. However a simple disconnect and reconnect to my wifi would fix the problem until it happened again. This seemed to be most common while watching YouTube videos, in fact it happened far too often which is why I went searching for a solution.
So as I mentioned things seem to be better for sure so far but I need to give it a week or so to see how much it is really helped, but so far I can't remember any wifi cutting out since I've made those two fixes.
Sent from my XT1060 using xda app-developers app

Wifi signal drops to "poor" and won't connect with 2014 moto x

I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
mikekory87 said:
I just received my gen 2 moto x last night and am having trouble connecting to Wifi at work. It connects to my home network and one of my work networks just fine, but when I try to connect to the work network I need it to connect to the signal strength drops to "poor" as soon as I press connect. My home network and work network both are password protected. I've verified the password and have the same connection settings as my friend's gen 1 moto x, which connects properly. The work network has excellent signal at all times when I am not trying to connect to it. It just keeps cycling from "connecting" to "saved."
Has anyone else experienced this or know a workaround? I found this but this is for a gen 1 (I'm not sure if that would help) but I'm not rooted so I don't have access to phase 2 authentication. http://forum.xda-developers.com/moto-x/moto-x-qa/wifi-signal-drops-trying-to-connect-t2872241
Thanks,
Mike
Click to expand...
Click to collapse
Exact same problem. Fine at home and everywhere else. Spent a couple hours this week on the phone with Moto. They keep saying it's the network, yet everyone else is on it. They say update firmware and open MAC. Both of which are done.
This is the message in the Access point every 3 seconds when my phone is trying to connect...
"Client Deauthenticated: MACAddress:9c:d9:17:a1:c8:51 Base Radio MAC:b8:62:1f:ad:5e:90 Slot: 0 User Name: unknown Ip Address: unknown Reason:Unspecified ReasonCode: 1"
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
bradley26 said:
My wife's phone drops WiFi in favor of 4G LTE at home. I have to turn off data to connect to WiFi but it eventually drops the WiFi. I'm still waiting on my pure edition so I'm not sure if its just her phone or if its a common problem.
Click to expand...
Click to collapse
This!
I have this problem all the time ON multiple networks, its very frustrating
Mines will disconnect from my 5ghz when the screen goes off and reconnects when turned on, works fine on 2.4ghz. I have a Nighthawk ac1900 so the phone is definitely the problem.
Sent from my Hammerhead
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
giovannirc said:
This is related to 802.1X, We have it implemented Radius and 802.1X at work and it doesnt connect. But the same AP has a guest SSID which has no protection and a separate vlan which has access only to internet and it works fine.
Click to expand...
Click to collapse
Sounds like this could be my problem. We have 4 networks we can login to, but they are all broadcast from the same access point. One says "secured with 802.1x" and is for laptops, two say "secured with WPA/WPA2" and are for cell phones/other, and the final is unsecured. I can only connect to the unsecured network.
So does it sound like it's the phone that's refusing the network, the network is refusing the phone for something the phone is sending back to it, or the network is refusing the phone for another reason?
I'm having this same issue. 1st Gen Moto X sitting right next to 2nd Gen, and the 1st Gen is connected while the 2nd Gen can't.
I'm having the exact same issue. It appears the problem is that older Cisco firmware doesnt support 802.11w, which is what the moto x 2014 uses by default. Here is a thread where a moto rep explains it to Cisco - https://supportforums.cisco.com/discussion/12331486/connectivity-issues-cisco-controllers-and-pmf-enabled-moto-x-gen-2
My girlfriend and I have this phone and we had a similar problem. It would connect/reconnect like a billion times before staying connected on our home network but connect fine on other networks. I tried several solutions but the one that worked was changing the channel on the router. I live in an apartment building and there are a lot of WiFi networks around me so I figured that might be causing some interference. I changed my channel from 6 to auto (it automatically jumped to 11) and now it connects instantly and is solid. What's weird is I tried channels recommended by WiFi analyzer and my other devices would connect just fine but the Moto X's couldn't even see the network in the list when it was on a lot of channels like 12, 13, and 14.
Seems like a weird WiFi radio firmware bug to me.
Is there a client side fix for this?
I just ran into the problem at my work. It is a major hospital. They are not going upgrade their cisco firmware so a couple of people's personal phones are able to connect to the network.
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
What!? Really?
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
will54880 said:
WiFi in general is bad on the X2014 and I am reading the same in the Droid Turbo forums.
Sent from my XT1095 using XDA Free mobile app
Click to expand...
Click to collapse
Wutang200 said:
I've not had a single issue with WiFi connectivity. I'm an IT professional so heavily reliant on WiFi.
Click to expand...
Click to collapse
I never had a WiFi problem with the Moto X 2014 until today at work. It wouldn't connect to a few different clients Wireless APs. At the first client site I power cycled the phone and WiFi still wouldn't connect. I then went to another client site and once again it would no longer connect. I power cycled again and this time it connected just fine albeit Bluetooth was acting funny and not connecting to the Moto 360. After cycling Bluetooth off and on again the 360 finally connected. Not sure if this is an actual issue or just dumb luck. I wonder if anyone that was having WiFi issues with this phone also has a Moto 360 connected via Bluetooth?
I don't own a 360 and my bluetooth is normally switched off unless I'm streaming music at home.
I know none of what I am about to write will solve anyone's issue but sharing my experiences mught help understand you're not alone. I wander between as many as a dozen different wifi networks daily. I manager a 63 room hotel on 7.5 acres where we are currently running EnGenius EAP350 AP's broadcasting in 2.4mhz band ONLY using .11bgn. I set the entire network to use one SSID so roaming is, in theory, problem free. My XT1095 has not had any issues at all here on property.
I also have my personal network in the lobby and main building under 2.4/5/.11AC side by side with out guest network. No issues bouncing around. I honestly expected issues but have found none.
There is one issue I have found in Android in general which can happen randomly, or I have not been able to induce the behavior only recognize it. Occasionally when I move from one building to another Android (ICS forward for sure) will forget which actual AP it's after and just hang. My solution is to tell the device to forget that node then once forgotten the network, of course, shows up in the list. I then select it and boom we're back in business.
I do have issues when I visit a network at say, the grocery store which requires accepting an EULA...the device simply will hang Wifi wize, even when I delete and reconnect I won't get the note to open the authorization page. I end up just killing wifi and going with LTE.
I get the same behaviors from all my phones ICS though Kitkat, don't have Lollipop yet darn it!!
I have long been frustrated with this weirdism from Android but have reached a point of M.A.D. with my devices but never found a solution.
I have noted I have the most issues by far with Cisco/Linksys devices. It has been almost assured that if I have an issue it's one of those routers running an older firmware version (amazing how many AP/routers use default password settings...I mean, really???)
Not 100% sure it's a firmware only issue but I do think it's some common bit of hardware in an AP/Router which can go spastic for some reason preventing Android from figuring out how to remain or get connected. I even had one of the EnGenius AP's go nuts, a fast swap with a freshly configured AP resolves but, again, still does not identify or solve the problem
I also sense there is some oddness deep in the bowels of Android's wifi/networking subsystem which just was never written correctly and may never be fixed.
Last I run and app called Wifi Analyzer by Kevin Yuan, it helps me a GREAT deal because I can target a specific AP/node to connect with. Android versions often defeat this by not remaining connected to that desired target AP and switching to something else. Here is where I think some of the issues with wifi connectivity live...Google MUST spend some time refining their wifi subsystem.
No matter this is a Very frustrating issue when it happens. My best solution has always been to forget the current connection then reconnect with it again once it reappears. Better yet use Wifi Analyzer or similar app to target a specific AP/node and connect/forget from inside the app, that really does seem to help, mostly...sigh, I know, sorry...
This WiFi issue is really aggravating. I have tried so many things:
1. Rebooting Router
2. Powering Off/On Phone
3. Turning WiFi Radio Off/On
4. Resetting Phone Cache Partition
5. Using WiFi analyzer and setting my router to various channels manually
6. Changing Router SSID
7. Forgetting SSID on phone and re-adding it
8. Verifying MAC Filtering is not enabled
9. Enabling MAC filtering and specifically allowing phone MAC address
10. Disabling "Avoid Poor Connections" in WiFi settings
11. Manually setting WiFi frequency band to 2.4ghz in phone settings
12. Disabling "WiFi Optimization" in phone settings
23. Changing WiFi direct and BT phone names (yeah, a big stretch, but I read somewhere that this worked)
24. Installed updated firmware on my ASUS RT-N12D1 (3.0.0.d.376_3602)
25. Disabled WPS on router
26. Switched router between Auto, Legacy and N-Only
27. Disabled Authentication and Encryption on router, just an "Open" connection.
After all of this, the phone still has WiFi connectivity issues. Sometimes after a phone power cycle it will connect to WiFi, but never for very long. Every other device I have connects to the WiFi without issues. I just got the Moto X a few days ago (AT&T version) and this is the first time I have ever had a device with WiFi connectivity issues like this. Very aggravating. There is clearly something wrong with either the hardware, or software on the phone.
There are some other oddities. When it won't connect to WiFi, there is something strange with the phone. Its not like it just can't connect or stay connected to WiFi, but somehow it seems like the WiFi is in a stalled state. Sometimes it won't show any WiFi networks and just says "Searching for WiFi networks..." until I turn off wifi and turn back on again. Then as soon as it turns back on, it will show the nearby SSID's, and try to auto-connect to my router, but after a few seconds it shows "Disabled" under the SSID. Then after a few seconds the disabled goes away, and it just shows the SSID name. It also won't let me change the WiFi Direct phone name while the WiFi is in this state, it gives me an error saying "Failed to rename device", followed by "Group Creation Failed". However, when I am actually connected to WiFi, I can rename the WiFi direct name just fine. So its not just simply an issue with bad radio signal or something, but something more serious, like the WiFi state is hung or something. If I can't resolve this in another day or two, I am going to have to return the phone, and hopefully a replacement will work. If not, I might have to get something other than a MotoX because I can't not have WiFi while at home and work.
---------- Post added at 12:29 PM ---------- Previous post was at 12:10 PM ----------
I found a way that seems to work to connect to WiFi. To clear, this isn't a fix for the data-sync issue that some people are having, or poor signal, but the issue where you can't connect to an SSID, and there is no error or anything.
1. Hold Down Power Button
2. Turn Airplane Mode On
3. Turn Wi-Fi On
4. Connect to SSID
5. Press Power Button down again
6. Turn airplane mode "Off"
I have now tried this several times, and it works everytime. If I turn off Wi-Fi and back on again, it won't connect, until I do the airplane mode trick. I don't know who to give credit for this, I have spent days and hours searching, and I remembered reading that from somebody else, but not sure where, so this is not my fix, I am just posting it here as it seems to work.
This issue is strange, and must be some combination of Android, and Motorola software/hardware/firmware configuration. I hope they get this fixed, but it at least now, this temporary fix will work whenever WiFi is not connecting.
For those of you getting WiFi connectivity problems, it could be related to your router setup. Download an app called InSSIDer and run a scan, then choose a channel that's not being used but make sure it's 5 channels higher or lower. For example, if it detects 3 networks on channels 3, 5 & 6, then you want to choose channel 10 or 11. If it detects one network on channel 6, then you should choose channel 1 or channel 10 or 11.
I noticed issues like this when I bought my Nexus 4 after my iPhone 4. Android devices seem to ship with rubbish WiFi radios.
Like I've mentioned before, I've not experienced a single disconnection with my phone either at home, work, in laws, coffee shops or anywhere else ever. Same with my first gen Moto X.
Mine is slightly different. Now and then, after power cycling or rebooting, it forgets all the WiFi passwords. Not every time. Just now and then.
Also sometimes it's quite fast, some slow. My wife's firs gen is pretty constant.

Galaxy Note 5 N920W8- Wifi Cuts In And Out

Wicked wakelocks and WiFi issues
Just yesterday I started having wicked WiFi issues, where both 5GHz and 2.4GHz networks would connect, then immediately disconnect, then connect again a few seconds later for it to just do the same thing, over and over. It keeps sending reports everytime it does it. I haven't factory reset though, but I'm going to have to.
Also, I keep getting insane wakelocks. Android OS is the worst, causing 7h+ of wakelocks in a 10h day. Google Play Services is pretty bad too, around 6h+ in that same 10h day.
Anyone else having major issues like this with their Note5? I have the N920W8 model, which I can't really find any info about anywhere
Im having similar wifi issues. Initially trying to connect to my 5ghz N home network (wpa2 psk) connect attempt, drop, connect attempt drop rinse and repeat. After a while it connects and stays connected, however, connecting to any web pages is painfully slow (like a super slow dns lookup), and i frequently get failed web page loading errors or failed to download apps from teh app store. Wifi calling is useless in this state. The same thing happens on an open hotspot network at work (2.4ghz) and the corporate (5ghz n) network. The note will ususally eventually drop wireless and force me back onto LTE. I looked at my data counter after just 3 days, and had used 27gigs of LTE, which is more data than I've used on tmobiles network since last year. Had some spotty wireless issues with teh note 4 rev 3 5.1.1 as well prior, but only had that phone for about 10 days before swapping for teh note 5. Prior to that I had the nexus 6 and no wireless issues on the same networks.
J'ai le même problème avec le 5g damn!!!
Luckily i have a dual dualband router, I set up the alternate AP 2.4ghz N wpa2 psk and the phone appears to be working fine at the moment on that network.
I ended up factory resetting and it appears working for now. A static IP address (DHCP reserved in the router) seemed to help.
Another issue I have though is when disconnecting from WiFi and connecting to mobile data, it seems to have DNS resolution issues until I turn data off and then back on. Not sure if it's the phone or the carrier (Wind Mobile) but it's pretty consistent
Not seeing these issues on my W8.
Sent from my SM-N920W8 using Tapatalk
I'm just having dreadfully slow WiFi on my att model, but it doesn't drop connection
Dial *#0011# and click "wifi settings" from the menu at the top right corner. Turn off power saving mode and restart the phone, see if that does the trick.
If not, google search "note 3 wifi issues" and/or "note 4 wifi issues"and look for answers there. In all likelihood the problems that are being experienced with Wi-Fi on the note 5 are similar to the Wi-Fi issues that the predecessors experience when they launched.
Sent from my SM-N910T using Tapatalk
It's Lollipop. It's a known bug in the software since Nov 2014 and Google hasn't addressed it. I too had issues with my WiFi when I first purchased it. But I found the work around. The bug is in the security software. The WpA2-PSK with TKIPS or AES which is a catch all, reeks havoc on our WiFi chips. It doesn't allow the phone to have proper DNS addresses resulting in severely slow internet or dropped connections.
Solution: Change your security standard to WPA/WPA2-PSK without AES or TKIPS.
Sent from my SM-N920V using XDA Free mobile app
Is that a phone setting or a router setting?
Hey guys,
I've got an Australian Samsung note 5 that has wifi problems. It started not working all of a sudden so i decided to go along with it but after a while i felt the need to try and make it work again. So i went into recovery mode and factory resetted (thinking that it would help) but then on the boot up after i came to the setup screen and found out that i was screwed. The samsung setup screen doesnt let you go past the setup screen without any wifi. Please help, i wanted to post a thread but im new to this community so i am restricted.
Thanks
p.s wifi networks can be detected but only when the phone is held right next to the router.
I fixed same problem of wifi, its a setting in phone, but you need to root phone, its system setting in system folder.
Any updates on this? Im running one 920g completely stock and another 920g with hybrid n7 port v9. Both have this same issue.

Categories

Resources