Database Develop

[ROM][Stock][ICS]LG P990 v28g Stock ICS flashable zip by harsh & tonyp [DISCONTINUED]

[ROM][Stock][ICS]LG P990 v28g Stock ICS flashable zip by harsh & tonyp [DISCONTINUED]
LG P990 Stock ICS flashable zip [DISCONTINUED]
​
This ROM is discontinued.
If you're looking for a stable ROM I recommend this ROM as an alternative: ParanoidAndroid CM10
It's more up-to-date and smoother than Stock ROMs - but at the same time still rock stable and qualifies as a daily driver.
If you want to continue using a Stock ROM on the GB bootloader I'd recommend to use the updated and actively maintained v30a/b Stock ROM by rugglez.
Some of the work of this ROM went into it - especially the heavily reworked ramdisk.
Using this ROM with the kowalski oldbl kernel does work as well (and fixes the callbug).
I've never intended to support a Stock ROM in the long term - I prefer CM based ROMs by far.
The initial intention of the first version of this ROM was to provide an easy way for people to test the SU660 leaks - back when we didn't even have P990 ICS leaks.
Nowadays that's easy, thanks to tools like the AIO toolbox by spyrosk, but back then it was more complicated for the users - especially with a SU660 ROM as base.
Then harsh & I decided to work on it together and update the initial SU660 base to a P990 v28 one.
​
A big thanks to harsh with whom I've been working closely together.​
What is this?
This is a flashable zip version of the official LG v28g ROM by LG.
It's a Stock LG Android 4.0.4 ROM which uses the default ("old") bootloader and stock ("old") partition layout.
I prefer to stick with the GB layout and old bootloader as pretty much all ROMs, including CM10, are build for that.
If you have used the NVFlash ICS ROM you need to go back to the GB partition layout.
There are two versions. The standard version will fit into the stock GB partition layout.
To make it fit in there we had to remove some apps, including LGEmail, LG Calendar, LGMemo (QuickMemo is still there, don't worry) etc.
If you want to have the full ROM you can use the extended version, but need to increase the /system partition size to 512mb+ beforehand (see here for instructions).
Note that by only changing the partition size the partition layout won't change - so you still can flash other ROMs like CM10.​
What's working?
This ROM is considered stable. harsh and I are using it as a daily driver currently!
Full hardware accelleration including:
Working Videocamera
Google Chrome
Videodecoding
etc.
In-call audio
Playstore
LG UI 3.0 & LG 4x lockscreen (THE MOST demanded feature in every dev thread )
Bluetooth
2G/3G
FM Radio
Everything else you can expect from a stable ROM (data, wifi, sms etc.)
What's not working?
slow charging on usb computer connection. Wall charger does work.
Workaround: Power off phone, attach usb cable, boot.
Screenshots (Power + Vol down) are empty. Just use Quickmemo (Vol up + down).
LG Application Manager not fully working and thus not included
The call issue of CM10 ROMs is present for some people.
If you reboot the phone once a day (e.g. at the morning) it usually won't occur during the whole day.
Credits:
Besides harsh thanks (especially for the old versions) to the following people:
(alphabetical order)
Someone missing? PM me asap!
aremcee
bihariel
ergoen
Kostja_V
wkpark
​

Due to the continuous misunderstanding: This ROM requires you to run the GB (aka the "old") bootloader and partition layout.
If you flashed a ICS ROM (kdz etc.) with NVFlash you need to go back to the old layout and bootloader, for example with this tool:
[TOOL] Full Brick Repair (Clean & Easy)http://forum.xda-developers.com/showthread.php?t=1975274
If you're coming from CM7, CM10, PA, GB (Android 2.3) Stock ROMs etc. this warning does not affect you.​
Note:
I fixed the error which required you to use CWM 5.0.2.x for this ROM so you can now use any recovery you want now.
I'd recommend the official CWM 6.0.1.5 Touch or the newest TWRP.
How to install the new CWM:
You can use the ROM Manager to install CWM. But you need ROM Manager premium (or an in-app purchase for ~2$) to be able to flash CWM Touch with it.
You can use this flashable zip to install CWM 6.0.1.5 Touch easily: http://forum.xda-developers.com/showpost.php?p=34263577&postcount=1083
You can use my freshly zipped NVFlash CWM6 touch Recovery flasher (based on Rusty!'s method):
http://goo.im/devs/tonyp/P990-stuff/various/CWM6.0.1.5 touch NVFlash-tonyp.zip
Remove battery, hold both Vol - & Vol +, connect the phone to your notebook and use the "install_cwm6.bat" file (or the matching linux sh install script). APX driver is included.
This will flash CWM without touching any other partition.

Installation (follow carefully!):
Read post 1 and post 2 completely before you're doing anything with your phone!
If it doesn't exist, yet: Create the folder "external_sd" on your internal sdcard.
Reboot once.
Reboot into your recovery.
If you are coming from another ROM than my Stock ICS:
wipe data/factory reset(!)
Install zip from sdcard (flash the ROM)
Reboot (can take a couple minutes)
After fully booting up and going through the setup wizard: Restart your phone once again
Don't touch the RIL! And don't mind the "Unknown baseband" if everything works. This just means you got one of the older basebands which aren't displayed properly anymore. Nothing to worry about.
If automatic time if off you can either flash the v28g baseband (see my stickyied thread) or disable automatic time and use ClockSync.
Download:
standard version (fits into GB's /system partition):
http://goo.im/devs/tonyp/P990-stuff/ICS
extended version ("full" version requires /system of 512+ mb):
http://d-h.st/CVb
Changelog:
Code:
[u]version 3.01[/u]
[LIST]
[*]build.prop lines added to identify it as P990 device in the ROM Manager
[/LIST]
[u]version 3.0[/u]
[LIST]
[*]updated to v28g
[*]CWM Encryption error fixed (you can use any recovery now)
[*]kernel updated. fixes the bluescreen issue and some bugs & memory leaks
[/LIST]
[u]version 2.0[/u]
[LIST]
[*]complete new version based on the v28e leak
[*]no more korean SU660 files, pretty much all bugs are fixed
[*]thanks to harsh who build this version!
[/LIST]
[u]version 0.98[/u]
[LIST]
[*]bsod on screen off fixed (thx arcee!)
[*]huge update to the updater-script
[*]now pre-rooted
[*]Playstore updated
[*]Stock Messaging app replaces LG's one
[*]added Stock LG Browser
[*]added LGAlarm
[*]removed Google TTS
[/LIST]
[u]version 0.81[/u]
[LIST]
[*]typo fix in the updater-script
[/LIST]
[U]version 0.8[/U]
[LIST]
[*]initial release
[*]A mix between the final SU660 v30c ROM and the P990 ICS leak
[*]custom kernel to let it boot with the old bootloader
[/LIST]
Old installation instructions for versions prior to 3.0 (which was way more complex):
Installation (follow carefully!):
Read post 1 and post 2 completely before you're doing anything with your phone!
Create the folder "external_sd" on your internal sdcard.
You need to use ClockWorkMod 5.0.2.x
TWRP & CWM 6.x will result in encryption errors (something to investigate later)
use e.g. RomManager, scroll to the bottom, choose "older recoveries" and install 5.0.2.0
Backup your current ROM
wipe data/factory reset
mounts and storage - format /system
Install zip from sdcard (flash the ROM)
remove the usb cable from the mobile phone!
(if you boot with the phone connected to your PC the PC will either freeze or show you a bluescreen!)
Reboot (can take a couple minutes)
After the setup wizard go to Settings - Connectivity and change the USB connection type to MTP
(now you can attach the phone back to your PC).
Restart your phone
Don't touch the RIL! And don't mind the "Unknown baseband" if everything works. This just means you got an older baseband which aren't displayed properly.
If automatic time if off you can either flash the v28e baseband or disable automatic time and use ClockSync.

Thanks man.

i'll try this and feedback later

thx i'm test:good:

Thanks man. I'll try whether the USSD code is usable or not. This is important for a prepaid user like me.
Sent from my LG-P990 using xda app-developers app

yeah baby
tonyp said:
It's possible that in-call audio is not working! It's too late to call someone to test it.
Click to expand...
Click to collapse
downloading now, will flash and call myself (landline) and report back
I get almost 40kb/s so I think it's gonna be a while

Thank u. Will try
Sent from my LG-P990 using xda app-developers app

flashing...

Damnit, I had it at the USB cable the whole time. I just realized the ROM will bsod when going into deep sleep.
This is a kernel issue due to the GB bootloader.
So this is mainly a "let's check out how ICS works" ROM at the moment
Doesn't deserve an own thread. I can't yet close my own thread, will have to ask a mod about it.

no go then
will check tomorrow for any news

dont worry, you did a amazing job by make it flashable
go get some sleep you deserve it and thanks you again for your hard work :good: :fingers-crossed:

unkown function "uassert"
I wanted to try this anyways(despite the BSOD issue). Installation aborted with (Status 6). Logs show
Code:
line 1 col 89: unknown function "uassert"
1 parse errors
I wiped data and was on CM9 PA rom before. Tried toggling script asserts in recovery but same results.
Let me know if I am missing something? [busybox maybe?]
Edit: Maybe this is a recovery issue, I am on 5.0.2.7, but never had this issue before with any other roms.
Fix: Just use the 0.81 build or modify the update-script as described in the post below.

Aj264 said:
I wanted to try this anyways(despite the BSOD issue). Installation aborted with (Status 6). Logs show
Code:
line 1 col 89: unknown function "uassert"
1 parse errors
I wiped data and was on CM9 PA rom before. Tried toggling script asserts in recovery but same results.
Let me know if I am missing something? [busybox maybe?]
Click to expand...
Click to collapse
This is a simple mistake I made resulting of me being tired.
I did some last minute modifications of the update-script file (to ensure no P999 or SU660 users try and install it) and unfortunately wrote uassert instead of assert.
You can either fix it yourself: Goto META-INF/com/google/android/updater-script and remove the first character (the "u").
Or download v0.81.
goo.im is a great hosting service and offers me remote ssh access via a linux terminal - so I just unzipped the ROM, fixed the line and rezipped it as v0.81. No need to re-upload
Please reply if it works.

v0.81 of this rom is release i didn't even finish to download the first build and another build is uploaded thanks tonyp download speed is 40kbps so it take a while to test it

Tonyp is one of my favourite guy, there is a reason behind and thats he is simply amazing!
Thank u man. Now ppl can flash it w/o worries and fear
Sent from my LG-P990 using Tapatalk 2

grimmyrippy said:
v0.81 of this rom is release i didn't even finish to download the first build and another build is uploaded thanks tonyp download speed is 40kbps so it take a while to test it
Click to expand...
Click to collapse
Oh, goo.im slow again. A couple hours ago I had full speed.
If someone wants to provide a mirror feel free to do so, I'm out now really.
The v0.81 zip is untested, I hope it works the way I did the change remotely. If it doesn't use 0.80 and apply the manual fix I posted in my last post.
Open the updater-script with a texteditor like Notepad++.

Use build 0.81
tonyp said:
This is a simple mistake I made resulting of me being tired.
I did some last minute modifications of the update-script file (to ensure no P999 or SU660 users try and install it) and unfortunately wrote uassert instead of assert.
You can either fix it yourself: Goto META-INF/com/google/android/updater-script and remove the first character (the "u").
Or download v0.81.
goo.im is a great hosting service and offers me remote ssh access via a linux terminal - so I just unzipped the ROM, fixed the line and rezipped it as v0.81. No need to re-upload
Please reply if it works.
Click to expand...
Click to collapse
thanx, i'll modify the update script and try. I also thought it should be assert but refrained on commenting lest you had defined your own macro.
Thank you for your hard work. :good:
Edit: Can confirm that modifying updater-script manually works. Using stock ICS now. Cheers.

Somebody who has installed it, could try running playing song through music player before screen lock?
Does music/song keep playing continuesly after screen locks and after 2-3 mins does the phone wakeup by pressing unlock key or still BSOD?
Definately unplug usb cable before doing this
Sent from my LG-P990 using Tapatalk 2

[L5][E610/E612] Discussion thread for Official CM10 Nightlies

By example of this thread, I thought it would be convenient to also create a separate thread for our L5. I will update this first post with relevant information and links when needed.
Info
CyanogenMod's site: http://www.cyanogenmod.org/
Announcement on Google+ by CM: link
Screenshots by luKi13223: link
Screenshots by Sirrocco with dpi lowered to 130 and theme applied: link
Requirements
Properly unlocked boot loader (here, a guide on top of first post)
Root/working CWM
Ability to read and common sense
Downloads
Nightlies started building. You can get the latest build from http://get.cm/?device=e610 OR http://10.cmxlog.com/?device=e610
CWM Recovery by Ricardo Cerqueira (CyanogenMod): Direct download. Alternatively you can download the flashable zip provided in the attachment, it's the same, but easier to install if you already had a recovery installed.
Google Apps (GAPPS) for Jelly Bean/CM10: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Short Installations guide
Make sure you meet the requirements
Download needed files (see above) and place them on your internal sd card
Update your ClockWorkMod Recovery to v6.0.2.8 (you can do this by using terminal, adb (guide) or use the flashable zip I've attached
This will avoid status(7) error messages and prevent issues with ROM Manager.
Flash "cm-10-build date-NIGHTLY-e610.zip" from your internal sd card with CWM (or if you prefer with ROM Manager)
[*]Optional: Flash custom kernel by PinkFlozd: link to thread WARNING: Don't install this kernel with builds created on 21 april 2013 or later (at least not untill someone updates the kernel)
Optional: Flash "gapps-jb-20121011-signed.zip"
After first boot see if your receiving any signal (provided your normally have any signal on that spot). If not, don't worry, a simple reboot might fix it.
Enjoy
Bugs:
Considering these are the very first nightly builds of CM10 for our device, the dev did a pretty great job. Almost everything is working. Thanks to him :highfive:
Network / data is not working after 1st boot. A simple reboot after a few minutes might fix this
Multi-touch not fully working (dual touch works)?
SD card is full error, while there is still room left (up to at least 300 MB). I haven't experienced this bug in a while, it may be fixed, but I'm not sure.
Accelerometer
Small mods/Fixes
Wake with Home key
Pinkflozd's custom kernel[/COLOR]. Supports multi-touch and allows for overclocking. His kernel doesn't work with builds after April 14th
Overclocked kernel for builds made after April 14th
Workaround to make accelerometer work
:

i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.

Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
same here...

Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.

Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)

E.jr said:
Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.
Click to expand...
Click to collapse
I don't know if he will look here. We could inform him about it, when we have more clarity about the bugs.
My main purpose was to concentrate talk about CM10 in one place, because in the other thread also other subjects were discussed and it got messy. And we might help each other here with CM10 related problems.

ldeleeuw said:
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)
Click to expand...
Click to collapse
thank you buddy..but where can we get recovery provide by CM?

For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm

Kisloo said:
For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm
Click to expand...
Click to collapse
it's not working buddy.

delete this lane :
assert(getprop("ro.product.device") == "e610" || getprop("ro.build.product") == "e610");
Click to expand...
Click to collapse
and it will work

Thanks buddy.. it worked on my phone!! but first boot took so long..i was stuck on CyanogenMod boot logo!! untill now!

Ianuz1320 said:
thank you buddy..but where can we get recovery provide by CM?
Click to expand...
Click to collapse
check first post

The new nightly does seem to lag a little as opposed to the original one.
The first one was smoother I've noticed.

E617
Has anyone tried CM10 for the E617 version of the L5? I'm to much of a newb to try it myself, I wouldn't be able to find my way back if I screwed-up my phone.

Bootlop
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP

I noticed that this cm10 for e610 has a kind of problem with multitouch,I have played shadow gun,modern combat 3 and modern combat 4 and six guns and in all these 4 games, I noticed that I can't move at the same time that I shoot,I wait that they solve this problem in next updates ;p
Sent from my LG-E610 using xda premium

Kisloo said:
delete this lane :
and it will work
Click to expand...
Click to collapse
thanks a lot mate!
---------- Post added at 08:57 PM ---------- Previous post was at 08:53 PM ----------
DodoKoce said:
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP
Click to expand...
Click to collapse
E: I found out why there is a bootloop, we didn't took the right bootloader, see here my tutorial: http://forum.xda-developers.com/showthread.php?t=2186161 - if you do everything like i did, everything will work properly

Use older build, idk - new is more bugged :/ Old working smarter than new.

OK, I've got it installed (nightly 20130310), first I installed the provided CWM (6.0.2.8), had to do that manually though, because for some reason Rom Manager destroyed the 6.0.2.5 version I had when I tried to install CWM through Rom Manager.
It's running smoothly, although I also see a little graining in the screen. I had no data issues.
Also, booting didn't take that long.
One strange phenomenon:
I had FreeL5 running before CM10. Before flashing CM10 I did a factory reset from CWM, cleaned cache and Dalvik cache. After booting CM10 for the first time, my WiFi settings were still there... hadn't expected that, but since I'm on a corporate WiFi connection which needs a username and password to connect, it was nice not to have to retype it :victory:
---
Previous devices:
HTC Desire - MIUI
HTC Desire HD - MIUI
Sony XPeria S - FreeXPeria JB
Current devices:
Samsung Galaxy Tab 2 7.0 - Stock JB (because my girlfriend doesn't want me 'messing' with it)
LG Optimus L5 (E610) - CM10 nightly

Bootloop too, any way to solve?

Flashing Werewolf rom

Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.

Hallako said:
Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.
Click to expand...
Click to collapse
install cwm 6.0.3.1

How
Flying_Bear said:
install cwm 6.0.3.1
Click to expand...
Click to collapse
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup

Hallako said:
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup
Click to expand...
Click to collapse
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom

but
Flying_Bear said:
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom
Click to expand...
Click to collapse
But i cant boot now when formatted system

Re flash official 20a with kdz flasher then

Flying_Bear said:
Re flash official 20a with kdz flasher then
Click to expand...
Click to collapse
i am now trying but when i start update flasher crashes when extracting kdz.
log
oblem signature:
Problem Event Name: APPCRASH
Application Name: KDZ_FW_UPD.exe
Application Version: 1.0.4.4
Application Timestamp: 4ac2a689
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7bafa
Exception Code: e06d7363
Exception Offset: 0000b727
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1035
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck

Flying_Bear said:
><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck
Click to expand...
Click to collapse
Oh right ill try all i can.
Thanks for helping and that luck is needed.
i got it working after adb push latest cwm and then cm.

nightly cyanogen 10.2 rom is getting stuck installing

Hello,
I tried to update my galaxy s via the integrated update screen on cyanogen mod to todays nightly rom update but during the android install animation it got about a third through and then went into quick recovery screen data which i couldnt read and then rebooted but to my existing version...in other words it didnt install properly.
Can anyone guide me through how to get this to update properly?
Thanks
Pete F

A few nightlies ago there was a bug in the integrated CM-updater...
Have you tested it with download the zip-file ,put it on your device and flash it via CWM-Recovery ??? That`s my favorite way ...
ukppete said:
Hello,
I tried to update my galaxy s via the integrated update screen on cyanogen mod to todays nightly rom update but during the android install animation it got about a third through and then went into quick recovery screen data which i couldnt read and then rebooted but to my existing version...in other words it didnt install properly.
Can anyone guide me through how to get this to update properly?
Thanks
Pete F
Click to expand...
Click to collapse

Thanks, I have not done this before so im not sure if it will work if i keep trying downloading the nightly every day...maybe it will work one day? If it doesnt then i will have to flash it i guess. Just wierd that it downloads fine but doesnt install properly.
Pete F
freakymod2120 said:
A few nightlies ago there was a bug in the integrated CM-updater...
Have you tested it with download the zip-file ,put it on your device and flash it via CWM-Recovery ??? That`s my favorite way ...
Click to expand...
Click to collapse

It should work ,but i know with some of CM10.2-nightlies there was a bug and pawitp (the dev) makes a warning not to use the inbuilt updater ...but i think with the last nightlies it should work ...my way is flashing over CWM with the zip-file and not "over the air" ...
Is there any error?
You need 2 posts then you can report a bug here http://forum.xda-developers.com/showthread.php?t=2385178 or i would do it for you ...
ukppete said:
Thanks, I have not done this before so im not sure if it will work if i keep trying downloading the nightly every day...maybe it will work one day? If it doesnt then i will have to flash it i guess. Just wierd that it downloads fine but doesnt install properly.
Pete F
Click to expand...
Click to collapse

SOLVED
Thanks for your help.
I managed to flash via CWM and now everything is great - and it sorted out my earlier problems which included lack of mobile internet, constant rebooting when turning on and problems with receiving sms texts.
For all those people having similar problem - here are the easy steps to get the new nightly 10.2 rom up and running on your Galaxy S:
1) Download the latest zip file for nightly ROM and latest GAPPS zipp file onto your computer.
2) Connect your mobile to computer and turn on the storage function so that you can see your phone's storage option on my computer.
3) Copy your 2 zip files from above to your phone's storage as zip files without extracting.
4) unplug your phone from the PC, turn off and then go into CWM via volume down/home and power buttons.
5) Select install zip from SD Card and then you should see error message something like 'partition is incorrect/different and you need to wipe data - don't worry about this as you will keep all your apps, ringtones, pictures etc.
6) Install zip from SD card a second time - this should now start the install process. Install the GAPPS file once this is done.
7) Reboot and you should be faced with a Cyanogenmod registration page. Go through the completion process and then your ready to go.
8) check in about phone in your settings to see the latest update in your settings.
I hope this works for you all but as always...this is what worked for me on my Galaxy S and any mod is at your own risk and I wont accept any abuse.
Pete F
freakymod2120 said:
It should work ,but i know with some of CM10.2-nightlies there was a bug and pawitp (the dev) makes a warning not to use the inbuilt updater ...but i think with the last nightlies it should work ...my way is flashing over CWM with the zip-file and not "over the air" ...
Is there any error?
You need 2 posts then you can report a bug here http://forum.xda-developers.com/showthread.php?t=2385178 or i would do it for you ...
Click to expand...
Click to collapse

No Prob...
Nice to know i could help ...
Good instruction about flashing ...:good:
ukppete said:
Thanks for your help.
I managed to flash via CWM and now everything is great - and it sorted out my earlier problems which included lack of mobile internet, constant rebooting when turning on and problems with receiving sms texts.
For all those people having similar problem - here are the easy steps to get the new nightly 10.2 rom up and running on your Galaxy S:
1) Download the latest zip file for nightly ROM and latest GAPPS zipp file onto your computer.
2) Connect your mobile to computer and turn on the storage function so that you can see your phone's storage option on my computer.
3) Copy your 2 zip files from above to your phone's storage as zip files without extracting.
4) unplug your phone from the PC, turn off and then go into CWM via volume down/home and power buttons.
5) Select install zip from SD Card and then you should see error message something like 'partition is incorrect/different and you need to wipe data - don't worry about this as you will keep all your apps, ringtones, pictures etc.
6) Install zip from SD card a second time - this should now start the install process. Install the GAPPS file once this is done.
7) Reboot and you should be faced with a Cyanogenmod registration page. Go through the completion process and then your ready to go.
8) check in about phone in your settings to see the latest update in your settings.
I hope this works for you all but as always...this is what worked for me on my Galaxy S and any mod is at your own risk and I wont accept any abuse.
Pete F
Click to expand...
Click to collapse

How to solve random reboots and other issues in Lollipop ROMs in S2 hd lte

UPDATED
Since these issues have been fixed in newer builds but as a s2 hd lte users, we have no option but to use older builds which have many issues. I found a workaround for them. If you are having wifi or other radio related issues, contact the ROM developer. This post can't help you. Flashing latest baseband helped me and could work well for you as well. Lets talk about two of the most common bug that haunts our device
1 Apps auto closing->( only for LMY48G builds,if you have newer builds,just flash gapps and reboot. to check go to about phone-> build number)
This is a webview related bug.
Download latest gapps from opengapps.org.
I prefer aroma installer as smaller packages don't have webview included,which will make the bugs worse.
Flash gapps. Dont forget to select 'android system webview' from the aroma installer.
Download the zip file from the
link
https://mega.nz/#!0d5Tiaja
Decryption key !JAG5Im-T75YN1CKIOiOcyDDaBH2ILD6dzwxw4xnhrBc
Extract "libwebviewchromium.so" and "libwebviewchromium_plat_support.so"
It is taken from stock samsung ROM and only works on armv7 devices.
Copy them to /system/libs using ESfile explorer or any other root explorer.
Overwrite the original file if asked.
give permission (-rw-r-r) to both file
Reboot to recovery
Flash this file "cm12.1 android system webview" from this thread(only for cm12.1, will cause bootloops in Xenon hd and resurrection remix)
http://forum.xda-developers.com/xperia-m/themes-apps/mod-google-android-webview-t3109216
Apps will now no longer auto close in your face without warning
((-> After testing for a month, I concluded that these steps are optional and use only if you want to have google android webview instead of cm12.1's built in 'android system webview'))
2) Now the most important part, random reboots.
This was reported on earlier builds of lollipop by many users.This is mostly caused by minfree that android uses to manage memory. If you navigate to sys/modules/lowmwemorykiller/parameters you can see 4 or 5 files. two of those files have wrong permissions. They are "adj" and "minfree".
If you give them (rw-r-r) permissions, you can adjust minfree values. the stock values are too aggressive and would cause constant reboots, freezes. Download romtoolbox, navigate to task manager, swipe left. you can choose to use any presets. i use 8,12,24,60,70,80 as minfree values.
Dont check "auto apply on boot" because you need to repeat this whole process after a reboot as those two files"adj and minfree" will be replaced from boot.img on boot by kern
Permanent fix: unpack boot.img. Navigate to ramdisc and open init.rc file in notepad. Find the line
chmod 0220 /sys/module/lowmemorykiller/parameters/minfree
chmod 0220 /sys/module/lowmemorykiller/parameters/adj
Change both values to 0644
save and close
Repack boot.img
Put it back inside the zipfile using winrar or use flashify from playstore to update boot.
I found tool to unpack qualcomm boot.img from this website. Full credits to the developer who made this tool.
http://www.droidbeep.com/how-to-unpa...-img-qualcomm/
download ROM toolbox and apply your preferred values
3. Low storage and optimizing apps(configuring ART compiler)
After google updated android runtime from JIT to ART, apps take up huge space and "optimizing app" takes forever. But there is workaround for that too.
1)Open build.prop in any text editor.
2) find these two lines:
dalvik.vm.image-dex2oat-filter=........(blah blah)
dalvik.vm.dex2oat-filter=...(blah blah)
3) Change both of these lines to
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=Verify-none
If these lines doesn't exist, in your build.prop,you have to add them manually
4) save your build.prop file
5) reboot to recovery and wipe dalvik cache
After this check your storage space, You will have plenty of storage left and optimizing apps should be faster. It works just like old JIT compiler from older android versions.
if this doesn't work for you, you have to edit these same lines from default.prop by unpacking boot.img

I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.

diabolicalprophecy said:
I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.
Click to expand...
Click to collapse
please, for e120s

OIAUser said:
please, for e120s
Click to expand...
Click to collapse
Please extract Boot.img from the zip file and send it. I don't have boot.img for e120s, or i can tell you how to do it yourself if you are interested.

Tell me how, I'll try to do it myself.
I will be very grateful

any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!

OIAUser said:
Tell me how, I'll try to do it myself.
I will be very grateful
Click to expand...
Click to collapse
I have updated the post on how to do it. You can find the required tool here with detailed instructions
http://www.droidbeep.com/how-to-unpack-and-repack-boot-img-qualcomm/

kdlinh said:
any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!
Click to expand...
Click to collapse
You can try wiping phone efs through odin in order to fix radio issues
1 Download stock jb rom
2 Check "phone efs clear". This is most important.
3 Click pda
4 click start
5 wait for phone to boot up
6 go to settings->software update to check if you are running latest jb build. Soft reboots and radio issues are usually caused by old baseband version.
7 Proceed with usual old way to install lollipop.
This way odin will wipe your efs settings to rebuild from scratch.

still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,

kdlinh said:
still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,
Click to expand...
Click to collapse
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.

diabolicalprophecy said:
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.
Click to expand...
Click to collapse
i have checked this efs box but failed :crying::crying:

kdlinh said:
i have checked this efs box but failed :crying::crying:
Click to expand...
Click to collapse
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version

Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?

OIAUser said:
Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?
Click to expand...
Click to collapse
you get "libWebviechromium .so" file while installing gapps package. Go to opengapps.org and download aroma installer.
there are two files in the archive i uploaded, libwebviwechromium_loader.so and libwebviewplatsupport.so. You need to extract and replace those files in system-> libs after flashing gapps package. The built in webview will cause random apps shutdowns. this file is critical. You need libwebviewchromium_loader to start webview app. your system will not function properly without it.

diabolicalprophecy said:
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version
Click to expand...
Click to collapse
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom

kdlinh said:
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom
Click to expand...
Click to collapse
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.

diabolicalprophecy said:
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.
Click to expand...
Click to collapse
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom

kdlinh said:
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom
Click to expand...
Click to collapse
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.

diabolicalprophecy said:
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.
Click to expand...
Click to collapse
can you give me the links , at least what i can do now is tried to install your baseband

it will brick your phone. Its for E120L only