Database Develop

[Q] Help: Bootloop after installing CWM (video) (tried google)

So I brought myself in a bad situation.
Here's a video showing what the phone does and me trying to get into CWM:
http ://www .youtube. com/watch?v=5F2Gg_eU7Yw
I was trying to root my sony xperia z1 compact using this guide: http ://techglen. com/2014/02/05/root-xperia-z1-compact-d5503-4-3-14-2-a-1-114-official-firmware/
Following the steps it asked me to CWM 6 using this guide: http ://techglen. com/2014/02/05/install-cwm-6-on-xperia-z1-compact-d5503-4-3-14-2-a-1-114-official-firmware/2
I checked firmware and version of my phone and everything was correct.
I must admit I have no clue as to what I'm doing but I'm normally ok with tech stuff and the guide seemed detailed and trust worthy so I thought I could do it following the guide.
I got the bootloading unlocked just fine and started to install CWM. I made it this far:
- After downloading CWM kernel zip (Its not the actual name of file, just a reference name), place it in internal or external SD Card of your smartphone
- Now extract CWM kernel zip on your PC’s desktop and copy boot.img
- Paste this file inside the folder where you have installed Minimal ADB and Fastboot
- Now turn off your smartphones completely
- Plug in mobile’s USB in cable in PC port only
- Hold Volume up button and plug in USB cable in mobile’s port
- LED will turn blue (If it does not remain blue for long, then read Optional part in bootloader unlocking method explained above
- Once you are successfully in fastboot mode, then you can continue
- Now type Fastboot flash boot boot.img and press Enter
- It will flash boot.img file on your device
- Now unplug the device and boot it up
- As soon as you see purple colored LED, start pressing volume up and down buttons repeatedly, until you are in CWM mode
- In CWM Mode, select “Install Zip”
Click to expand...
Click to collapse
I downloaded CWM .img file, placed it in my ADB folder and placed a copy on my phone. Using ADB I flashed the CWM .img (bolded step), unplugged the phone and the CWM screen came up and I was able to navigate using the volume buttons. So far so good.
At this point I realized that the CWM .img file I had downloaded and placed on my phone was not a zip file and I couldn't find it. So I hit reboot to boot up my phone normally so I could place the .img packed as a .zip file on the phone. Some error message came up, but I didn't manage to read it but caught something saying root I think.
As it rebooted the sony logo came up but then the purple led turned on and it seemed to boot into CWM again. A brief screen explaining how to navigate came up as you see in the video below (but with no menu options to actually navigate) before it rebooted and repeated.
I can still use ADB and fastboot, but I can't get into CWM and I can't boot normally.
Edit: Just tried "adb devices" and it says "list of devices attached" and then it's just blank. I can't push files onto the phone (error: device not found) but I can still reboot the device fusing fastboot and there's no error when I try and reflash cwm. Reading up on this it would seem that usb debugging has somehow been turned back on so adb can't acces the phone but fastboot can. Any way to turn on usb debugging through fastboot?
I tried a forced shutdown using the off button next to the sim card but it didn't help.
The phone is not recognized by my computer so I can't place or delete files from it.
Here's a video showing what the phone does and me trying to get into CWM:
http ://www .youtube. com/watch?v=5F2Gg_eU7Yw
If I don't press the volume button it will just keep looping in the sony logo and purple led light.
What I want to do is get back to a normal boot, remove the CWM .img file and put the .img file packed as .zip file onto the phone and retry the process.
I have googled a lot of options, but most results are a year old and I hardly understand half of what is being suggested. If anyone could please walk me through the process in a language that a total idiot can understand I would be so grateful and hopefully get my sleep back.

ravneravn said:
So I brought myself in a bad situation.
Here's a video showing what the phone does and me trying to get into CWM:
http ://www .youtube. com/watch?v=5F2Gg_eU7Yw
I was trying to root my sony xperia z1 compact using this guide: http ://techglen. com/2014/02/05/root-xperia-z1-compact-d5503-4-3-14-2-a-1-114-official-firmware/
Following the steps it asked me to CWM 6 using this guide: http ://techglen. com/2014/02/05/install-cwm-6-on-xperia-z1-compact-d5503-4-3-14-2-a-1-114-official-firmware/2
I checked firmware and version of my phone and everything was correct.
I must admit I have no clue as to what I'm doing but I'm normally ok with tech stuff and the guide seemed detailed and trust worthy so I thought I could do it following the guide.
I got the bootloading unlocked just fine and started to install CWM. I made it this far:
I downloaded CWM .img file, placed it in my ADB folder and placed a copy on my phone. Using ADB I flashed the CWM .img (bolded step), unplugged the phone and the CWM screen came up and I was able to navigate using the volume buttons. So far so good.
At this point I realized that the CWM .img file I had downloaded and placed on my phone was not a zip file and I couldn't find it. So I hit reboot to boot up my phone normally so I could place the .img packed as a .zip file on the phone. Some error message came up, but I didn't manage to read it but caught something saying root I think.
As it rebooted the sony logo came up but then the purple led turned on and it seemed to boot into CWM again. A brief screen explaining how to navigate came up as you see in the video below (but with no menu options to actually navigate) before it rebooted and repeated.
I can still use ADB and fastboot, but I can't get into CWM and I can't boot normally.
Edit: Just tried "adb devices" and it says "list of devices attached" and then it's just blank. I can't push files onto the phone (error: device not found) but I can still reboot the device fusing fastboot and there's no error when I try and reflash cwm. Reading up on this it would seem that usb debugging has somehow been turned back on so adb can't acces the phone but fastboot can. Any way to turn on usb debugging through fastboot?
I tried a forced shutdown using the off button next to the sim card but it didn't help.
The phone is not recognized by my computer so I can't place or delete files from it.
Here's a video showing what the phone does and me trying to get into CWM:
http ://www .youtube. com/watch?v=5F2Gg_eU7Yw
If I don't press the volume button it will just keep looping in the sony logo and purple led light.
What I want to do is get back to a normal boot, remove the CWM .img file and put the .img file packed as .zip file onto the phone and retry the process.
I have googled a lot of options, but most results are a year old and I hardly understand half of what is being suggested. If anyone could please walk me through the process in a language that a total idiot can understand I would be so grateful and hopefully get my sleep back.
Click to expand...
Click to collapse
I hope you made a backup of your phone.
It may be worth wiping everything and flashing the Z1 stock firmware on to your phone. Stock firmwares can be found relatively easily by using Google. There are also lots of different video tutorials on YouTube on how to how to revert back to stock firmware and on how you can escape bootloops. Try this: www. youtube. com/watch?v=j4gm9VeQCHA

You're on the wrong forum, this one is for Xperia Z, for Xperia Z1 Compact go here:
http://forum.xda-developers.com/sony-xperia-z1-compact

Xperia Z1 wont start? Solution

After flashing a Kernel I could not turn on my Xperia at all.
I tried pressing every button but nothing.
I found an answer here
http://forum.xda-developers.com/xperia-z/help/xperia-z-booting-flashing-kernel-t2363288
that lead me to this link
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
NOTE: in that post is mentioned that you have to install the device drivers, but the drivers didn't install; always merked error; still I managed to get my device on and running without those drivers.
Using this firmware (place it in the installation folder of Flashtool (example: C:\Flashtool\firmwares )
Name: C6906_14.4.A.0.108_Stripped.ftf
Link http://www.4shared.com/file/eaV6T1gsce/C6906_144A0108_Stripped.html
If the lilnk isnt working anymore ( is not my file) just search on google for the " C6906_14.4.A.0.108_Stripped.ftf " file, is around 20mb in size.
Download it and place it in the C:\Flashtool\firmwares folder.
Download flashtool here:
http://www.flashtool.net/index.php
Get the flashtool from that link, there are other pages that download some weird version of flashtool, which doesn't do anything at all.
----
Once you have flashtool installed, and the firmware " C6906_14.4.A.0.108_Stripped.ftf " on the folder mentioned above, do this:
1. turn on Flashtool.
2. connect your "off" device to the computer by USB
3. On the Flashtool screen, click on the thunder (located on the top left corner) and select "flashmode"
4. Select the firmware you added to the folder (you will know which by checking the device version on the list)
5. Once selected, on the right side of that window, you will see an area " exclude" and several options to click under it.
6. Click on everything, just leave the kernel clear. This means it wont install anything else but the kernel.
7. flash it
8. after this my device was turning on again!
My guess is that it works too for other Sony Z1 versions, just find the firmware for yours.

Thanks, but this is the Z section, not the Z1.
Sent from my C6603 using Tapatalk

Micromax canvas A1 bricked, pls help!!!

hi,
my micromax a1 was runnning marshmallow 6.0.1 when during a security patch update installation got stuck and failed to boot again. now just booting into "dead android with exclamation mark". upon pressing power button and volume up and going into recovery(Android stock recovery) menu , cant wipe partition or data as it throws error "E: failed to mount/ cache" errors..
upon trying to install with any SD card also throws same error.
then i tried to install through ADB, while connecting to PC , PC not detecting mobile in recovery mode but detecting in bootloader mode. with fastboot flash command (for installing TWRP/CWM) in bootloader mode, error coming as "sending recovery failed(unknown status code)" .
Kindly help...

same happened to me yesterday . do you find any solution ??

Hi there !
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
HIT THANKS IF HELPED
if link do not work here properly then just google 'canvas a1 stuck on startup' ... and follow link in associated with xda

Device is dead
My phone is neither switching on, nor charging.
I flashed the stock ROM due to some problem with the rooted device through SP Flash tools. It completed successfully, but the device is not switching on or charging.
KIndly help

Back to emui 8.0 stock

I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Huawei Multi-tool
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.

Thanks, man. You are really helpful...
---------- Post added at 06:01 PM ---------- Previous post was at 06:00 PM ----------
Could you upload the Huawei multi tool in any other platform. Mega.nz is not responding.

Will this relock the bootloader?

Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting

AnantNigam said:
Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting
Click to expand...
Click to collapse
To lock bootloader.. go to the bootloader tab in multitool and there you can find an option as lock bootloader for that you will need the same unlock code that u used to unlock the bootloader in the first place.. follow the instructions which is given in the app.. its simple

hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.

Praveen Jeykar said:
hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.
Click to expand...
Click to collapse
Just follow every step from my tutorial and you won't have any problem.

How to unroot honor 9i?

sir my honor 9i not working
sknoman1 said:
I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.
Click to expand...
Click to collapse
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number

yogeshyadavv143 said:
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number
Click to expand...
Click to collapse
did you follow the exact procedure?
if you have missed a single part that give you the exact message as no os installed

Hi guys, really sorry to ask, but how do I install Multi Tool on Mac OS? Thanks in advance!

This will work on Nova 2i? As this is same as Honor 9i.

[GUIDE] How to return to Stock/Flash Images with QFIL

Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot

Mine just in case

Awesome, thanks for this post! it will really help us in upcoming projects!

Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.

ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.

My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.

I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.

Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.

000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse

it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls

Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8x​Please help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted