Related
Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.
The cyanogen rom 4.2.3 has USB tethering support, but I can not get it to work, mainly because of missing information/documentation.
In 'settings' 'wireless controls' there is a nice 'Internet tethering' option to switch it on. When I switch that on then my Windows XP PC shows an unknown device 'Andriod Phone' and would like to install drivers for it. Where can I get these drivers from ?
Markus
I would also like to know how the usb tethering works for a mac as well. Didnt find any information on that. Thanks in advance.
You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7
Under Ubuntu Linux (from an end-user perspective), when a G1 is connected with USB tethering enabled, network manager connects as if the phone were a standard, ethernet connection.
Shane2 said:
You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7
Click to expand...
Click to collapse
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus
markusb said:
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus
Click to expand...
Click to collapse
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.
Nothing happens on Mac OS X 10.5.8 neither on 10.6.1
dumfuq said:
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.
Click to expand...
Click to collapse
Isnt this Q&A? but I think this is it.... http://handheld.softpedia.com/progDownload/HTC-Sync-Download-81096.html
Im trying to get this to work also
I couldn't get it to work on my Windows XP SP2 computer at work. I get a code 10.
Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
bassderek said:
If you're running windows XP the driver isn't included on your computer. Some people have installed HTC Sync to get the drivers, personally I got them from this post:
http://forum.xda-developers.com/showthread.php?t=445436
I can confirm that the driver from that post works, I am using tethering with my laptop right now to write this post!
Click to expand...
Click to collapse
bassderek said:
Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
Click to expand...
Click to collapse
The search doesnt always give you what your lookin for if you dont word it a certain way man................
I think im gonna need a step by step.... I got the file... the computer recognizes the device.... But it doesn't register as a connection....
To everyone that is having problems tethering:
I was having the same issues. At first I wasn't able to get it to install, and then it would just keep saying the device couldn't start.
i found a very simple solution. I went into device manager, uninstalled all of my usb ports, and restarted my computer.
When it restarted, it automatically installed the usb drivers, and the tethering has worked ever since.
I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....
badaphooko01 said:
I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....
Click to expand...
Click to collapse
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?
nmw407 said:
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?
Click to expand...
Click to collapse
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?
Binary100100 said:
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?
Click to expand...
Click to collapse
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.
nmw407 said:
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.
Click to expand...
Click to collapse
That's your problem then. Yeah update to sp3 and you will be good. I promise.
I'm running into the same tethering trouble, but appear to meet all the criteria mentioned in this thread and other threads i've come across. the bottom line is i can connect with ADB access and mount my phone's SD card via the usb connection, but tethering doesn't work under several versions of Cyanogen on my laptop. currently I have CM 4.2.12.2 on my rooted Dream. I have windows SP3 installed (installed it twice because problem persisted). I've uninstalled all the USB ports per an above post, rebooted and plugged my phone in. The laptop reinstalls the USB ports, and finds the phone as an "ADB Interface" named "HTC Dream Composite ADB Interface". I can update the drivers with the google SDK USB drivers which makes the device an "Android Phone" named "Android Composite ADB Interface" instead. With either set of drivers installed, once I go to Settings on my phone and enable tethering, the device under windows goes away and instead i get yellow question mark "Other Devices" named Android Phone. I can try to force it to use the same USB drivers but it won't install them.
With tethering turned off, i can successfully type "adp devices" on my laptop console and see that my phone is there. once i turn tethering on, the same command shows no devices.
The Dream works with tethering just fine on my windows pc and shows up as a "Network adapter" named "Windows Mobile-based Internet Sharing Device".
My laptop is a compac presario in case that matters. what do i need to do on it to make tethering work?
just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!
hamx0r said:
just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!
Click to expand...
Click to collapse
+1
This is totally the problem. I spent hours trying different ways then finally googled it and came here
Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.
The standard Samsung USB driver that PDAnet had listed for the Samsung Moment worked for me as well, will give these new ones a try on my other system.
thank you
I added a link to this thread in the sticky
EDIT: Nevermind the n00b question. I was able to get the drivers installed and I am good to go.
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
skater4690 said:
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
Click to expand...
Click to collapse
have the same problem. i'm on 7, 32bit
did you enable USB debugging?
Gunnman from Galaxy S
yes of course. first thing I did after I rooted
I'm drunk so bear with me. go into device manager and browse for the driver manually ,include subdir. point to programfiles\samsung.
if that don't work use the 64bit drivers on 32bit windows. don't run setup just browse to the extracted dir from the unknown device in device manager. it worked for me at work. good night
Gunnman from Galaxy S
since i had issues w/ the 32bit driver exe, i extracted it and zipped it up incase others have the same issue.
http://rapidshare.com/files/408470448/Samsung_Usb_Drivers_x32.zip
this thread should be stickied since W7 doesn't come with the drivers, it seems.
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Beast84 said:
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Click to expand...
Click to collapse
Anyone?? I can't get get adb to recognize my device for the life of me
Try both 32bit and 64 bit drivers. At work I have 32bit win7 and the 64bit drivers fixed it up. Dont run setup just go through device manager chosse the unknown device and point it to the 64bit driver directory and check include sundirs.
Try using correct drivers for your win version but turn the phone off, connect and then power up while connected....worked fine for me after messing with both lots of drivers first and no luck
Make sure you select "USB debugging" for ADB to work folks.
Where can I get the mac driver..i looked everywhere please help
this thread is legit!
thanks for all of your help so far guys.. BUT i still cannot get my laptop to sync up with the phone properly (win xp pro, sp3)...
I've downloaded and installed both drivers and the computer is recognizing the external drives, but they are showing as removable disks E: and F:. when i double click to open, it is telling me to insert a disk? i feel like i'm almost there, but there is somethign i'm missing!
usb is mounted and usb storage is off. usb debugging enabled.
any help would be appreciated.
Windows drivers issue
Have you tried mounting the drives. Same thing happened to me when you have it connected to the computer drop down the usb notification and mount. The your drives should be accessible.
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
p.sandeepreddy said:
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
Click to expand...
Click to collapse
Why don't you take the time do first do some reading and find the drivers and then second team on how to install and use this email drivers.... If I give you the links you won't learn a thing but I can tell you they are here in so many different threads started by folks like you that wanted the info spoon fed to them that it goes me a headache..... So show some initiative
Sent from my cm_tenderloin using Tapatalk 2
Reply
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
p.sandeepreddy said:
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
Click to expand...
Click to collapse
If you installed Dell Sync correctly and the Fastboot and ADB drivers correctly the your problem is driver related.... Do you not see a yellow exclamation in your device manager for you to update the driver?
You should probably be install the Android SDK with the Google USB drivers also
Sent from my cm_tenderloin using Tapatalk 2
reply
Yes i saw and yellow xlamatory in device manager..Could you Please guide me what exactly i could download or from where ..like which version Android SDK and Google USB drivers ..
I believe you are trying to connect your Streak 7 to your computer so that you can transfer musics and files onto your Streak 7, right? If that is the case, Honeycomb does not support USB as mass disk device. You need to upgrade to Win 7 or use an app from the marketplace to do this.
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
giveen said:
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
Click to expand...
Click to collapse
You need the WMP11 runtimes (as that has MTP support).
Then you need the specific mtp driver for the S7, which is included in Fastboot+ADB.zip
It's much easier just to use an app and do a wireless transfer.
All HC and newer devices only officially support MTP
(at least that's what goog wants, new devices that dont support MTP are in the minority)
I believe the WMP11 runtimes are offered via windows update, the only thing you need to specifically download are the device specific mtp drivers.
(They're not even drivers per-se, you can force install a generic mtp driver and it'll work fine, but that's besides the point)
reply
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
p.sandeepreddy said:
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
Click to expand...
Click to collapse
If you have Win 7, just plug the DS7 in and it will be recognized as an MTP device in Windows Explorer or the Devices and Printers folder.
Or you can use an app like Wifi File Explorer or File Expert to wirelessly transfer file to/from your computer and your DS7. You need to have a Wifi network. Consult instructions and support through these apps on how to use them.
Yes I was able to see the DS7 in my computer on windows 7,and was able to transfer musica and movies but,when i transfer books they get transferred but not visible on the device unless i open them a App Called "Quick Office" where it shows all the loaded files on DS7,any idea how to get them as different folder or see them seperately ,Also i saw the drivers.zip but did not extract it as did not feel the use of it !is there a specif use of it!
If you have problems from any Android 4.0 an higher to connect to Windows XP MTP & PTP in yellow question mark you can download Microsoft User Mode Driver Framework 1.0 and last work 1.9 for Windows XP without Windows Media Player 11 to work Samsung/LG/SONY/Huawei/Xaomi/Nokia/BlackBerry/Motorola. I highly recommened install Windows Media Player 10/11 because some programs like Samsung Kies/Kies 3/SmartSwitch not work at all to update android without PC Windows XP if you not update you phone with your router (PC faster update even Windows XP update connect USB even 2.0 than update connect you Wi-Fi). Also recommened install Visual C++ 2010/2012 to connect some program like HiSuite 10.0.0.510 still work Windows XP. Do you help you?
I recommened also install exFAT for Windows XP.
I am highly thankful to you for giving me a clue for my solution and I connected galaxy grand neo to PC via USB and that phone displayed a message that please install sp3 and windows media player 11 on your PC to get mtp access and I already have sp3 but I found that I have no windows media player 11 in my PC so I thought that user mode driver framework is my solution and it is attached to windows media player 11 so I installed your attached files and also media player 11 and now when I connect my android to PC now I get a dialog saying open in windows explorer or take no action I selected open in windows explorer and my phone opened in explorer and I am now able to access all of its files at last highly thanks