Database Develop

USB device not recognized:Cant connect to laptop..??

laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia

a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao

thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;

its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.

Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia

bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.

USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.

axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?

I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia

I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.

USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.

replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay

really? 4 years later?

[Q] Can't connect my Captivate through USB anymore

Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!

Hmm. You have Mass Storage selected and up-to-date USB drivers. Try selecting USB-Debugging and Stay Awake in the Development option of your phone. If that doesn't fix it, then I have a few other ideas.

Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.

I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?

catire said:
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
Click to expand...
Click to collapse
I'm sure usb door is completely opened

Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.

Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.

jgchaval said:
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
Click to expand...
Click to collapse
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!

climber1872000 said:
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Click to expand...
Click to collapse
A friend of mine, who bought the same phone on the same day as I did, plugged in his phone on my computer using my cable to the same port my phone was connected, and he did get the "USB Connected" notification on his phone
govgeek said:
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
Click to expand...
Click to collapse
No, i'm using the default launcher that comes with the Captivate

jgchaval said:
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Click to expand...
Click to collapse
I just did the new AT&T update and mine is now having this problem. I have to manually go into manage applications > usb settings > mass storage to get it to work now

a.n said:
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
Click to expand...
Click to collapse
I did all that yesterday, but the device ain't listed in the USBDeview nor it shows up in the Device Manager

did you finally fix this problem? because I'm having the same issue here

Same here. It was working fine, I could connect to Kies, transfer music in Media mode and see both sd drives in Mass Storage mode. Then I rooted today and now I get nothing. In anything but Kies mode I get the Windows Bong of Recognition, but still not visible in Explorer. Also, my Home screen stays active instead of switching to the USB animation like it did before. I know this can't be a consequence of rooting the phone, can it?
EDIT: More weirdness, with the phone connected in Mass Storage mode if I look at My Computer in Explorer there are 2 extra drives showing, but they are greyed out and when I click on either of them it asks me to insert a card as the drive is empty. WTF???

UPDATE: I unrooted and managed to get my USB connection back to working. It is still a bit flaky as I sometimes have to disconnect/reconnect several times before it works, but at least it now works although it sometimes loses sync in the middle of transferring a file. Can't imagine why simply rooting the phone would cause the loss of USB connectivity. I am going to reroot and see if it occurs again.

OK, a rerooted the phone and this problem is now back. I have no problem connecting while in debugging mode. I installed OCD (non-Market apps mod) and when I turn off debugging and connect I get the Windows bong and see the USB icon in the Notification bar, but the MTP screen never comes up and I can't see the phone in Explorer (Mass Storage mode) or in WMP (Media mode). Kies can;t see it in that mode, either. I really don't want to have to unroot every time I want to look at the phone contents. Any ideas? PLEASE!

I'm having a similar problem - I installed the Perception ROM and immediately afterwards I can't see the USB connection at all from my PC or my Mac. The USB icon on the phone does not come up either.
I'm trying to get my hands on a different cable - but the weird thing is when I plug the USB into my computer the phone starts charging for like half a second and then stops.
This is really annoying. I tried changing the rom to Cognition 3.02 but that didn't change anything.

There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.

avgjoegeek said:
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
Click to expand...
Click to collapse
This isn't my first rodeo... But to answer your questions:
I used the rooting method posted in XDA forums - the one-click rooting.
I've used the drivers included in the xda-forum. Not the kies software.
The only thing that changed was the loading of a new custom rom. The cable works (confirmed on my friend's phone). I can't get odin to restore back to stock because I can't get the computer to recognize the phone in either normal or in download mode. I've restored to stock using the jh7 in the stickied q&a thread
I don't think it's a hardware issue either - I think it's software-based. I'm going to try to take it to an at&t store today at lunch to see what they say.

I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.

greeto4 said:
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
Click to expand...
Click to collapse
What rom are you on

[Q] USB Connection Issues

I have an issue with my PC not recognizing my Captivate. When I plug in the USB cable to my PC, I can choose to activate USB mode and it prompts me to mount the drive, I say yes but nothing shows up in My Computer. I was able to do all this fine just a few days ago.
I have uninstalled/reinstalled the drivers. I installed Samsung Kies and it doesn't recognize the phone. I tried my phone on another PC and it won't show up there either. I've factory wiped the phone twice now.
Is it a problem with the phone or is there something I can do to get this to work?

I'm having the same issue. Did you get this resolved & if so, how? Tried both ports on my MB Pro & work PC...tried Samsung cable & another USB cable. Debugging is on.

Try Settings -> Applications -> USB Settings -> (select) Mass Storage
I found that when my captivate was set to Kies my computer wouldn't pick it up.

Mine was set to ask on connection. Tried mass storage mode (debugging off) & no dice. Back to ask on connection with debugging on, and still nothing. I've tried all 3 USB ports on my work laptop and both on the MB Pro. Any other ideas?

Did u try enabling "debug mode" and seeing if the PC recognizes it.

The main issue is usually your USB cable. I had the same issue. You need to find an OEM mini usb cable for it to work properly. The one that came with my phone works fine, but when i went to ATT and bought one for my work, it only lets you charge the phone and does not put your phone into USB connection mode.

cajuntigerbait said:
The main issue is usually your USB cable. I had the same issue. You need to find an OEM mini usb cable for it to work properly. The one that came with my phone works fine, but when i went to ATT and bought one for my work, it only lets you charge the phone and does not put your phone into USB connection mode.
Click to expand...
Click to collapse
The ones from MonoPrice work for me and they were like $1.50

Diablo: Been in debugging mode most of the time trying to get it to work. Main issue is getting my personal MB Pro to recognize, so I won't be able to check/tinker much until after work tonight.
cajuntigerbait: I've been using the provided Samsung cable – tried a work Blackberry cable (works fine with my work BB) to no avail as well.
Will update tonight. Any tried & true methods for cleaning the phone port while I'm at it? Thanks for the quick responses, everyone

richhy said:
The ones from MonoPrice work for me and they were like $1.50
Click to expand...
Click to collapse
Thanks, will check the site & order a few when I get a chance. Couldn't hurt to have a couple spares, right?

[Q] Computer connection problem

Hi,
I have searched, I have trown, I have do many things but cant fix this one. I was up till 5 in the morning last time but nothing. The problem I am getting appeared when I changed the usual samsung cable (which I got in box) with Nokia one, since I lost the last one Samsungs. The cable and everything is fine because it works on my notebook and there I can do everything normally.
So whats the prob:
I somehow connect my phone to the computer via media player and I can do anything with files on my phone, I can copy them to my computer BUT I cant do it vice versa, I cant copy nothing to my phone. Its just saying discovering ... and it will stay like that. In mass storage (if I get him to there ) it will lag so I have to unplug and plug it again.
Mom has the same windows 7 as me.
I have a high feeling that this has something to do with my computer being used to cable used before and I would have to delete some file from my computer (phone was already formated) ...
Oh and I have used every single USB on my computer, which is I think around 10 usbs
Restarted the comp and the phone dozen of times, still nothing.
Debuging mode, nothing appeared ...
I tried connecting to samsung kies, it wont connect, it just says connecting to a device.
Guys if you help me, my phone and I will be gratefull forever
Update: I have formated my computer also, still the same!
Update2: I will send $10 to paypal to the one who helps me with this one!

I had a similar problem, i would first ensure, that the Device isn´t connected to a USB Hub, but directly into the Computer. Sometimes the front USB Panels acts like a Hub, so if its not a laptop try to plug it in the back of the computer.
You said, you already formated the device? How? If you can do this again, then make a wipe. Go into the Recovery Mode with the 3 Button Combination and select wipe. After reboot you should have a clean device.
Do you have a external memory card inside? If yes put it out.
Now connect your device to the computer, wait until all drivers are installed. If you get any problem right here, then go into Kies and on the left top Corner where it says Kies, select Driver recovery. It will automaticaly try to reinstall the drivers.
After that you should be getting a connection to Kies.

Tried, and other then loosing my massages and contacts I didnt achive nothing :S

[SOLVED] Charging but not recognized by the PC

Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas guys?

Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas guys?
Click to expand...
Click to collapse
hi,
you don't say what Laptop o/s you using on laptop.?
Windows 10, Windows 8.1 Windows 8 or Windows 7...... or Apple o/s.?
Briefly my take is on this is, most probably the laptop and not phone.?
(Yes, i might be wrong of course.)
My reason is, i have Windows 10 laptop
and sometimes / a few time, ) my
laptop does not recognize my Note5
Yes, , it charges phone (just like yours) but does not recognize phone.!
I then have to re install drivers for phone I use Smart Switch to re install drivers.
Then it works ok for a while etc..
Why don't you test phone on someone else's pc or laptop to make sure.?
Overall my Note5 is mostly recognized by laptop
Good luck

willcor said:
hi,
you don't say what Laptop o/s you using on laptop.?
Windows 10, Windows 8.1 Windows 8 or Windows 7...... or Apple o/s.?
Briefly my take is on this is, most probably the laptop and not phone.?
(Yes, i might be wrong of course.)
My reason is, i have Windows 10 laptop
and sometimes / a few time, ) my
laptop does not recognize my Note5
Yes, , it charges phone (just like yours) but does not recognize phone.!
I then have to re install drivers for phone I use Smart Switch to re install drivers.
Then it works ok for a while etc..
Why don't you test phone on someone else's pc or laptop to make sure.?
Overall my Note5 is mostly recognized by laptop
Good luck
Click to expand...
Click to collapse
Thank you for the reply.
As I have already mentioned, I did try another laptop. Mine is windows 8.1 x64 and my brother's windows 10 x64. I tried re installing the drivers from smart switch but to no avail.
Any other ideas?

Hazardous Pain said:
Thank you for the reply.
As I have already mentioned, I did try another laptop. Mine is windows 8.1 x64 and my brother's windows 10 x64. I tried re installing the drivers from smart switch but to no avail.
Any other ideas?
Click to expand...
Click to collapse
hi ,
why i still think its laptop /pc drivers related.
(But yes ,i might be completely wrong ..?)
i have laptop win 10 x64 also.
The issue is of laptop, not always recognizing a device /similar as yours ,but charging device .
Other devices, when trying to connect to laptop (,not just my Note5 ),( from time to time) eg Note 2,..3 ..4 , USB flashstick ..my Polar M400 running watch etc .Device is not recognized but charging .
So for me,
its just not Note 5 but other devices also (.from time to time) .
My "take " on this issue is that it points between drivers (pc ,laptop) //// relevant devices eg Note 5 ..etc . and not just the firmware issue of Note 5 ,??
but yes, as stated i might be wrong .
good luck
Post note ,
i have to add reinstalling drivers "sometimes " help " ,
but it happens again, later. ( not recognizing device )
So i am pointing fingers, at Windows o/s + the "company/maker " of laptop ..pc and + devices .The compatibility between all three above ,combined and yes i had similar issues ( from time to time with Win 8 ../Win 8.1 etc ).
Yet, i have also found that certain of my devices
that work nearly 100% of time on my laptop !,
which indicates to me, the compatibility of devices between device /laptop ,is very good ..??

I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.

Hazardous Pain said:
I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.
Click to expand...
Click to collapse
Wait, have you tried this yet?
Pull down notification menu while phone is plugged in and there should be a option for changing from charge mode to mtp and such. Just pull down notification and tap on the biodiversity that's lasted.
Sent from my SM-N920T using Tapatalk

Hazardous Pain said:
I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.
Click to expand...
Click to collapse
hi ,
strange ,
just for the record i also have a Lenovo Flex 2 laptop ( x64 ) Win 10 .!!!
i have rooted all my devices on Lenovo laptop ( Note 2, Note 3 , Note 4 and my Note 8.0 tablet etc )
Yet , i am at moment not interested in rooting my Note5 ( i have it already a couple of months )
I am happy keeping myself busy with Theme store ,tweaks/beta apps and lately with the interesting Lockmaster app( Play store ) for lockscreen ... etc .
If i get the root "urge " i pick up my other rooted devices and use them .or /update or/ install root only tweaks/apps etc. for my rooted devices .!!
i hope Marshmallow fixes your issues .!!
good luck

Jammol said:
Wait, have you tried this yet?
Pull down notification menu while phone is plugged in and there should be a option for changing from charge mode to mtp and such. Just pull down notification and tap on the biodiversity that's lasted.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
There are no options in the pull-down menu it just says cable charging

Hazardous Pain said:
There are no options in the pull-down menu it just says cable charging
Click to expand...
Click to collapse
Did you try clicking where it says Cable Charhing?
Edit: Never mind that. I see what you mean. That's odd it's not there for you. It definitely sounds like a PC issue. You can try completely removing all Samsung drivers and start over. Just using the Uninstaller will not cut it though. You'll have to do a system level cleaning of all samsung drivers.
Sent from my SM-N920T using Tapatalk

Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas
Click to expand...
Click to collapse

navdeepavi said:
Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas
Click to expand...
Click to collapse
The issue is not with your device. It's because of Windows. Is there another computer that you can use to connect your device to that you have never connected to before? Also make sure that you are using either the cable that came with your device, or at least a good quality cable. I've had that issue occur in the past because I was using a cheap cable.
Click to expand...
Click to collapse

Jammol said:
The issue is not with your device. It's because of Windows. Is there another computer that you can use to connect your device to that you have never connected to before? Also make sure that you are using either the cable that came with your device, or at least a good quality cable. I've had that issue occur in the past because I was using a cheap cable.
Click to expand...
Click to collapse
I did plug it in my brother's laptop but no dice. I tried the OEM cable and an Asus cable on USB 2 and 3 ports, it did not work on either pc. How can I completely uninstall samsung drivers?

For users having the same issue, I found a solution (which also fixes all charging issues by the way).
If you look at the charging port, you will see a "tongue" where the pins connect. We all know that fast charging requires 5 pins not 4. The OEM cable comes with 5 as you all know. However, I found the OEM cable to be very fragile and not reliable, one pin tends to get bent without much pressure. This leads to the "tongue" going down somehow. The fix is to get the "tongue" up a bit, use a toothpick or something that does not conduct power. As for the cable, I suggest you use an Asus cable (I have 3 of those, 2 from my nexus 7s and 1 from my Zenwatch). Asus cables come with 5 pins and they are sturdier than Samsung's and they are a bit longer as well. Now the phone charges properly, fast charging and all and the computer recognizes it once again.
Hope this helps you too

Hazardous Pain said:
For users having the same issue, I found a solution (which also fixes all charging issues by the way).
If you look at the charging port, you will see a "tongue" where the pins connect. We all know that fast charging requires 5 pins not 4. The OEM cable comes with 5 as you all know. However, I found the OEM cable to be very fragile and not reliable, one pin tends to get bent without much pressure. This leads to the "tongue" going down somehow. The fix is to get the "tongue" up a bit, use a toothpick or something that does not conduct power. As for the cable, I suggest you use an Asus cable (I have 3 of those, 2 from my nexus 7s and 1 from my Zenwatch). Asus cables come with 5 pins and they are sturdier than Samsung's and they are a bit longer as well. Now the phone charges properly, fast charging and all and the computer recognizes it once again.
Hope this helps you too
Click to expand...
Click to collapse
so meaning the charging port "tounge" need to be lift up a bit? so not the cable problem? im on this situation now.. i tried all my cables and only fast charging.

jayyusz said:
so meaning the charging port "tounge" need to be lift up a bit? so not the cable problem? im on this situation now.. i tried all my cables and only fast charging.
Click to expand...
Click to collapse
Yes, exactly

Hazardous Pain said:
Yes, exactly
Click to expand...
Click to collapse
I'm having this same problem these same problems. Other then I'm not able to get it to recognize even after doing everything that was said to do in this thread.
I feel like I'm missing a file? I was messing with them and just may think that could be my problem. is there anything else that has not been said in this thread I could do to fix this problem? When connected to my computer it recognize it as a charger. I can't access my files from my computer to my phone.
any help would be very helpful! Thanks!

I'm having the exact same problem but now I tried to use Flashify to go back to original recovery instead of TWRP & now by recovery or boot IMG is screwed so it wont even boot to recovery..
It boots only to download mode & is not recognized by any PC we have, with every cable I've tried.. uhhgggggg

I was having the same issue. Here is what solved it for me:
• Disconnect the usb cable.
• Go to Control Panel\All Control Panel Items\Troubleshooting\Hardware and Sound
o Go down to device / hardware and devices – click on that
o Follow instructions to correct issues. This found I needed a bus device driver update.
o Let it update and once done go out.
• On PC - Go to Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings - go down until you get to the part that says "All Networks" ...expand the list by clicking on the arrow to the right. In this area you will see "Media Streaming" There should be an area highlighted in blue that says "Choose media streaming options" click on that. Make sure you "allow all" . Once that is done, click "ok" at the bottom. Plug your device into the usb and it should be recognized. Seems a recent Windows update has that filter off.
• Now, restart your computer.
• Use original usb cord that came with phone! Plug in phone then plug in usb to computer.
• It should recognize your device now.
I now have to restart computer every time I want to connect my device but it works.

Hi I am having that same problem with my note 4. It doesn't seem to be a pc problem as no pc at all none Nada recognizes the phone. Windows 7 to Windows 10. None. Used 2 workmates of mine who also have note 4s on my laptop and all the laptops i used i used their phine on itand they worked so blaming the pc seems to be out of the equation..your solution and all those settings have been untouched as it has all devices allowed ..... tried cleaning the connectors and also different oem cables to no avail ..The only thing I have not done is change the logic board

Hi I hope somebody can help me. I am having exactly the same issue. though I don't think its PC or Laptop problem. I have two Note 5 the other one is working just fine, while the other Note 5 that was just charging was connected I noticed that running *#0808# I can select AP and CP but MTP+ADP was not selected and if I try selecting the radio button I will be able to but after pressing Ok or Reboot it back to no selection at all. Which I observe on my other Note 5 that was working its always selected every time I run *#0808#.
One more thing noticed is that on the Note 5 that was not working I boot it download (ODIN) mode and connect back to USB of my PC and Laptop, I hear a sound (the typical sound in windows once you connect any USB device) though I cannot access it I am positive that my USB port on both device are in good condition and since it was detected in windows through ODIN boot mode I was under the impression that its a phone software/firmware related. Can somebody help me on this one? thanks