[highlight]I know you're happy to see some movement regarding the Galaxy Note and ICS but please refrain from posting to this thread unless you have to add anything of value [/highlight]
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on experimental builds is the leading
** cause of male impotence.
[size=+1]IMPORTANT NOTES[/size]
Click to expand...
Click to collapse
This is a experimental Build of the current state of CyanogenMod 9 for the Samsung Galaxy Note. CM 9 is based on latest AOSP sources plus some usefull tweaks and features.
CyanogenMod 9 is still under heavy development and will probably be finished in January/February 2012. The device specific part for the Galaxy Note is under heavy Development, too.
[highlight]FLASH AT YOUR OWN RISK[/highlight]
[size=+1]WHAT'S WORKING[/size]
Click to expand...
Click to collapse
WiFi should work as expected.
3G/GPRS/EDGE Data and Calling
Audio
Touchscreen as well as the S-Pen (proprietary S-Pen Apps by Samsung are not included and would'nt work anyway.
Sensors should work. (ie. at least GPS is confirmed to work properly)
[size=+1]KNOWN BUGS[/size]
Click to expand...
Click to collapse
Bluetooth is unstable. Don't rely on it just yet
Battery Usage doesn't work.
MTP Mode does not work. You need to push/pull files via adb
Camera doesn't work. Will be that way until we can get our hands on a ICS leak for the Galaxy Note
[size=+1]INSTRUCTIONS[/size]
Click to expand...
Click to collapse
Installation using ODIN
Odin 1.83 should be fine. If you don't know what Odin this, stop reading further right now. This rom isn't for you.
Do a full wipe in the Recovery mode before flashing.
Enter Download Mode on your device.
Start Odin. Load up the ROM in the PDA Section of Odin. Make sure not not to change any settings like Flash Lock, Re-Partition etc. Just use Auto-Reboot and F. Reset Time.
[highlight]Flashing this rom WILL increase your binary counter and may/will void your warranty.[/highlight]
After flashing make sure to boot into Recovery and do a full wipe. If you want you can adb push GAPPS to your device and install them accordingly.
Installation using CWM
- READ FAQs: http://teamhacksung.org/wiki/index.p...sked_Questions
- Make sure you're running a proper working CWM like the one from CM7
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
- Don't restore Apps using Titanium Backup!
[highlight]Flashing this rom MAY increase your binary counter and may/will void your warranty.[/highlight]
[size=+1]DOWNLOADS[/size]
Click to expand...
Click to collapse
Make sure you have read the entire post. There are bugs and caveats. This rom is a pre-Alpha release and not suitable for daily usage. It may even break your device. Please only flash it if you know what you're doing.
Build 01022012: http://bit.ly/icsnote_b1 [Multiupload] ODIN Version
Build 01022012: http://bit.ly/icsnote_b1_cwm [Multiupload] Flashable via CWM.
Additional Downloads
GApps v6: http://www.multiupload.com/JV91OI4HZ0
Samsung USB Drivers: http://www.mediafire.com/?8jq83u3xs6w8jou
Google USB Drivers: http://developer.android.com/sdk/win-usb.html
Changelog:
01-02-2012 Intial Release. Codename: FULLOFBUGS
[size=+1]SUPPORT[/size]
Click to expand...
Click to collapse
As this is a pre-Alpha release that contains a ton of bugs and unresolved issues there is no offical support by Team Hacksung and/or CM.
But there is a channel on the IRC where users can exchange their experience using this ROM. (ie. User2User Support)
http://webchat.freenode.net/?channels=icsnote
[size=+1]DEVELOPERS[/size]
Click to expand...
Click to collapse
AdamG-, atinm, codeworkx, coolya, guiper, mauimauer, nebkat, Unhelpful, xplodwild, yjwong, teamhacksung, the cyanogenmod-team. And many more...
[size=+1]SCREENSHOTS[/size]
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Happy new year!!
Hi there,
a few words on questions that came up so far:
There is screen flicker (ie. black lines) in some apps? Why is that?
Since we can't use the ICS 3.0.9 Kernel that leaked together with the XXKPx Builds for the SGS2 we can't use
the new ICS Graphics blobs which depend on the new kernel.
The Graphics blobs currently in use in the first build are the ones from Gingerbread and those are (which is pretty obvious if you aks me)
not fully compatible with ICS.
A quick workaround that might fix the screen flickering for some apps while breaking others is:
Go to Settings -> Developer options -> Tap "Force GPU rendering" (enabled).
There are issues with SD mounting (internal/external)
Already on my list for the next build along with working MTP)
Do I have to factory reset when going from this build to the next build?
Most certainly not. Since all releases are tested before release I'll let you know if there is something you need to do before upgrading.
Is this a Team Hacksung release?
Yes it is. I am maintaining the development for the Galaxy Note while working closely with codeworkx, nebkat, xplodwild et al.
Is it supposed to have a forum on CM website?
Nah. Since we are in pre-Alpha stage there is no support besides the IRC User channel mentioned in the first post.
Notes on progress:
* YouTube playback will return. (This is kinda flaky in the current build)
* I am taking a close look at the USB gadget driver and have begun work backporting the Android standard gadget driver to replace Samsung's messy gadget driver.
Sweet, looking forward to giving this a try.
Sent from my GT-N7000
Der Beginn einer neuen Ära !
The beginning of an new era
Is it also possible to flash with CWM? Will there be a CWM File too?
PS: Aachen? Ich auch ;D
Wow, that's a lot of stuff done already!
Wish I could try it, but I really really need camera support...
Thanks for your work
Waw, I love you Maui
I will give it a try this week end
Great News!... Thanks Dude
yeaaaa man !! yeaaaaaaaaaaaaaaaaaaa
best news...really excited
Nice one Maui, deserves front page coverage...
If you let me know your kernel github I'll have a look at the camera.
Submitting bug reports on experimental builds is the leading cause of male impotence.
Click to expand...
Click to collapse
Love it!
Sent from my GT-N7000 using xda premium
thanks, waiting for the release
Sent from my GT-N7000 using xda premium
Guys it specifically says on the OP do not post unless you have something valuable to say. Click the thank you button instead
Sent from my GT-N7000 using XDA App
ohhhhhhh
Brainstorming for saving the binary counter:
Shouldn’t it be possible to
- flash the kernel out of the archive using CWM Manager or Mobile Odin
- Boot direkt into Download Mode after flashing the kernel
- Flash the archive without kernel using Odin
Any comments on that?
BTW: Is ICS hardware acceleration working?
Very nice
There is any way to get or to build a CWM File?
Flashing using mobile Odin works a treat....
Don't forget you will probably need to fac reset...
Isn't it possible to use the camera driver from the galaxy s 2?
Sent from my GT-N7000 using XDA App
for those who want a flashable .zip, try this:
http://www.multiupload.com/AAQMT1BWL3 (new link)
(use only for testing, full wipe is required! you will loose all data)
( changed link with changed updater script, old is also working)
It's already smooth like butter
nice work!
Related
I’ve been compiling some Cyanogenmod 9 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every 3 days.
I am fairly new to the Android scene, so please provide feedback if you feel that I could be doing something better.
Thanks to:
The Cyanogenmod team and pershoot- This is their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.05.11
ROM:
Mirror 1: http://d-h.st/XIP
Mirror 2: http://ge.tt/4Llv4ZH/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 8e32a8b85babc703cbd04492096c8a92
2012.04.30
ROM:
Mirror 1: http://d-h.st/rTw
Mirror 2: http://ge.tt/46YIw2H/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 470c7de00e2d20a79c1491d73f3c7aac
2012.04.27
ROM:
Mirror 1: http://d-h.st/yOi
Mirror 2: http://ge.tt/9pq9LxG/v/0
GAPPS: http://goo.im/gapps/gapps-ics-20120429-signed.zip
MD5: 54b269e017db71150f7631f6e6aac47f
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
A Youtube apk can be found here: http://forum.xda-developers.com/showthread.php?t=1529715
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page
Me - https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
badboy47 said:
will test it tomorrow. Thank you!
for some odd reason when i click on ROM download link, i get this...
Click to expand...
Click to collapse
Thanks! I look forward to hearing the results. The filehosting site I'm using might have been flagged by ESET for some reason. In fact, the reason I didn't use devhost is because I use the same security software and I've had this exact same problem with them. It should work if you temporarily disable virus protection, I assure you that there's nothing malicious in these files If it's still causing problems I'll re-host the files somewhere else tomorrow.
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
slack04 said:
out of curiousity, what's different about this ROM than the other (supposedly...) nightly builds here? Regardless, thanks!
Click to expand...
Click to collapse
They are all built from the same code so the only real difference is update frequency. The other kangs tend to update every 1-2 weeks so they may be more well tested; I'm aiming to provide something more cutting edge. The builds listed as "nightly" are referring to an official snapshot Cyanogen posted earlier this month, it hasn't been updated and seems to have been pulled from the download site as well.
EDIT: FIXED
Sent from my SGH-I997 using xda premium
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
nickwarn said:
When Cyanogen team pushed out the 2 nightlies for the tab they pushed one for P4wifi and one for P4tmo and the one for P4tmo could be used on P4(GT-P7500). So my question is, can we use the one for Verizon LTE also or is there any hardware diffrence between P4tmo and Verizon device?
Click to expand...
Click to collapse
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Coffeebeans said:
I'm not entirely sure, but my guess is that there is probably a hardware difference. I would suggest trying this build: http://forum.xda-developers.com/showthread.php?t=1461240. I will try to post a p4tmo build next time but I won't be able to test it myself.
Click to expand...
Click to collapse
Ok, i stay of it then. But it sure is tempting to try. When we used Tmo build on P4 we just had to change updater script and it was fully functional with 3G.
not to be the annoying brat here, but are the camera functionalities fixed yet?
martyr2k6 said:
not to be the annoying brat here, but are the camera functionalities fixed yet?
Click to expand...
Click to collapse
No camera in any ICS ROM until Samsung releases their code. None. Not going to happen. Period. Stop asking.
I think there is a problem with ICS rom on my LTE tab. It doesn't matter which roms i tried, i always have the battery drain issue ( due to system awake during standby mode.)
- I did format data/wipe cache + davik before flashed the rom.
- Auto sync on except for picture
- Other apps i use which are running in backgound are Hd widget, wizz widget , friendcaster, Battery monitor widget. These are the same app i use when i running 3.2 twz rom ( battery drain about 20-30 mAh. With ICS rom, it is 170-180mAh).
=>Does anyone know how i can solve this problem? Thank in advance!
Just a quick update on what's going on:
Pershoot has posted new builds in the other kang threads; these builds contain new library files as well as kernel updates. You may want to check out the updated CWM recoveries he has built as well. I'll be building these new libraries into my builds starting with the next one. If the kernel updates aren't merged into cyanogenmod at the time of the next build I'll build a kernel as well. I've also decided to leave the 3G and LTE builds to other developers for the time being, since I don't have the hardware to test them it's hard to keep up with updates and issues.
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Simpson8 said:
Since I updated I cannot be my tab to connect to my windows pc any ideas?
Click to expand...
Click to collapse
Go to Settings > Storage > Menu button at top-right of screen> USB computer connection > Select MTP
Great! I've been using the builds from rootzwiki since they get updated frequently. Might switch to these since I visit here daily.
New build is up. Enjoy!
Is this ice cream sandwich? I wasn'tsure
mvaughn12 said:
Is this ice cream sandwich? I wasn'tsure
Click to expand...
Click to collapse
Yes, it is.
trying to download keep saying daily limit reached
4.2.1 AOSP based Paranoid is here : http://forum.xda-developers.com/showthread.php?t=2132975
Tanks to Black_Prince for bringing it to us, it's time to close this thread until a new CMPA comes...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More screenshots
To be honest, this is not tablet mode at all, it has nothing to do with silly build.prop hacks. This is the first and only Android rom to feature true Hybrid mode. This rom lets you scale and project every app, every widget, even systemcomponents individually. Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course. Apps have the capability to switch into various designs or layouts according to the device they run on. This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size. You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to. You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot. You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode. Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself. This project will entirely transform your device, but retain the aesthetics and the feel of your phone.
Donations to molesarecoming
to D4rKn3sSyS
to Cyanogenmod
to me
Install Rom
Install Gapps
Wipe caches, factory reset is a must if you're coming from another rom than CM10
CWM -> Advanced -> Fix Permissions (VERY IMPORTANT STEP)**
FAQ & HELP - Read before asking!
Go to Settings, System, Font size, set it to NORMAL
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Cyanogenmod Project, for CM10
Tina, for images on this thread http://krebsmilk.de/
evilisto, for Sense Recent Apps mod, and basic Tablet mode source
dubidu, for hiding statusbar mod
D4rKn3sSyS and all the paranoid team, for the galaxy S2 rom
Fuss132 for horsepower kernel
Very special thanks to incarnation95 for building 2.52 from source and teaching me how to build from source
Check changelog
VERY Special thanks to all the donators!, you support me for making a better work each day!
http://goo.im/devs/quentin330
To update be carefull to follow the followig steps:
1) reboot in recovery
2) flash the update
3) flash gapps again
4) advanced/fix permissions
5) reboot
How to set the workspace mode
How to change an apps Layout and size
Does this ROM use or have Siyah Kernel? What kernel is it using?
Hey you sure you got siyah kernel for the g version?? ... I dont want to brick my phone!!!!
Sent from my GT-I9100G using xda premium
y2kkingboy said:
Does this ROM use or have Siyah Kernel? What kernel is it using?
Click to expand...
Click to collapse
Kingspp said:
Hey you sure you got siyah kernel for the g version?? ... I dont want to brick my phone!!!!
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Okay sorry for this, the siyah kernel is used by the I9100 rom but it's not used in this rom, I will delete this line right now (I copied from the original thread that's why it's written)
But I can garanty you won't brick your phone as I'm using this rom right now on my I9100G
quentin330 said:
Okay sorry for this, the siyah kernel is used by the I9100 rom but it's not used in this rom, I will delete this line right now (I copied from the original thread that's why it's written)
But I can guaranty you won't brick your phone as I'm using this rom right now on my I9100G
Click to expand...
Click to collapse
You really got me shocked for the siyah kernel.... God I was excited... Well otherwise thanks for porting....
Sent from my GT-I9100G using xda premium
One more thing.... How can you port I9100 cm9??? Your cm9 links lead to it.... Which cm9 have you used as base???
Sent from my GT-I9100G using xda premium
Kingspp said:
One more thing.... How can you port I9100 cm9??? Your cm9 links lead to it.... Which cm9 have you used as base???
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
I used the 20120618 nightly from I9100G, again I didn't edit the thread enough, thank you for the notice
On CM9 my SGS2G is not able to play sound (Music or speech commands of my navigation app) properly while GPS is searching a signal. It is always interupting. Could someone please check if this issue is fixed on this ROM?
Looking nice
this rom do i need flash CM9 before flash it or just i can install from any ics rom??
good to see this rom
I'm happy to see this for our G! thanks! downloading right now and will give a feedback asap...
hope everything goes well
Hello, thank you for porting the ROM. Before I do this, just to double confirm, IF I am currently using CM9, do I still have to do factory reset? Or straight flashing over CM9 without factory reset will do? Once again, thank you so much. =)
walauu said:
Hello, thank you for porting the ROM. Before I do this, just to double confirm, IF I am currently using CM9, do I still have to do factory reset? Or straight flashing over CM9 without factory reset will do? Once again, thank you so much. =)
Click to expand...
Click to collapse
It's best if you do factory reset after flashing a new rom to avoid complications.
OT : I'll be testing this thoroughly and will report bugs for you.
Anybody installed this rom? Kindly give the feedback....
Review (Screenshots)
Well this rom is all about the looks... so here are a few..
My current Settings:
System dpi : Custom dpi: 160dpi
Statusbar dpi : Custom dpi : 150dpi
Google Playstore:
Youtube:
Default Camera:
Contacts:
Settings:
Default Calender:
Default Dialer:
App Drawer(Nova Launcher):
Default Calculator:
Poweramp:
Bugs/Cons:
Default Browser(Different from the preview in OP):
Settings (Different from the preview in OP):
"Mainly" (No sense Recents and statusbar Transperency)
Recent Apps(Long press of home menu)(Different from the preview in OP):
To the dev:
Excellent work....Thanks a lott... Finally a tablet rom for the g version..
Did not find any major bugs...
Quite fast...but slower than cm9(Boot time)
Custom dpi settings for every app, status bar, system ui.
Can be used on daily basis.
Please see to the cons and try to change the appearences in the next update!
Samsung Galaxy S2 GT I9100G
Rom: Paranoid Android(Custom Dpi)
Kernel: Cm9 Kernel
@Kingspp, your attachment cannot be viewed. Please update, thank you. =)
walauu said:
@Kingspp, your attachment cannot be viewed. Please update, thank you. =)
Click to expand...
Click to collapse
Updated...
Sent from my GT-I9100G using xda premium
I am very excited to try it thanks alot
QuickSilverCM - CyanogenMod 9
This ROM is now rebased to locerra's CM9 sources. I fixed Bluetooth, removed a few Apps and added Chrome and init.d as well as build.prop tweaks. It can be flashed directly over HC or other ROMs as it is bringing its own kernel along but a wipe is most likely needed if coming from another ROM.
What does not work
- Video Hardware Acceleration for some Video types [I fixed a lot of the codecs and ported over missing hardware ones from the Stock, but there are still a few left non-working. Please use BS Player or VPlayer. MxPlayer removed a lot of stuff in their newest release because of licensing issues and ATM it is for example not able to play DTS Audio (which breaks most of my mkv files). It also seems to have problems with mp3 encoded audio tracks. I use BS Player, because VPlayer crashes, but both play all files I threw at them just fine. For streaming BS Player is best, because it is the only one with really working LAN browse capabilities. With most of the new Version of those players you do not need to care about the Codec,]
- Front Camera Recording (Does not crash anymore, but does not work either, because something in the settings format changed, that needs to be fixed)
- Bluetooth A2DP [from reports seems still not fixed]
- Mass Storage over USB Adapter (working on it)
What works
- Everything else AFAIK
Installation
- Make a Nandroid
- Download QuickSilverCM and Gapps (Gapps here)
- Boot into recovery
- !!!WIPE!!!
- Install QuickSilverCM first
- then Gapps
- reboot
- Have fun with your bloatfree GTab
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog
0.3 Everything upgraded to ohanars (locerra's) newest git commits. More tweaks. More supported codecs. A lot of small fixes. It seems A2DP is still not working Please install the hotfix from here or here to get the AdBlock hosts
0.2 Rebased to locerra's CM9. Fixed Bluetooth. Removed some Apps. Added Chrome, Google Now and Google Ears. Also added modified build.prop and init.d support.
Downloads
QuickSilverCM 0.3 AdBlock hotfix - Drive - Dev Host
QuickSilverCM 0.3 Full - Drive - Dev Host
QuickSilverCM 0.2 Full - Drive - Dev Host
Thanks
- Iocerra, Aorth and the CyanogenMod Team for their awesome work on which this ROM is based
- The folks at Google for ICS
- [email protected] for apktool
was just going to post on the QuickSilver thread that you have been away for sometime which indicates that you are coming out with something special, but never thought it will come out like this .
Will download to test , but will make it my daily rom when bluetooth is fixed as i always use my bluetooth set for calling.
Nice to see, there comes a new cm. Thx for ur awesome work.
Waiting for the upload finish and then I will download it ASAP! Good job lowtraxx!:thumbup:
Sent from my GT-P6800 using Tapatalk 2
omg! this is definitely worth a trying! been waiting for such nice release for a very long time, good job!
Weiter so!
Sent from my great Note-Tablet Mode using Tapatalk 2
I dont want to sound negative or ungreatfull, but why release something when it's not fully functional. The items on the "not working" section seem to be important. If i where the developer, by the way i am not nor do i know code but IF I WERE,i would release it only when the major items are 100% working. I have flashed both original Samsung Galaxy S and original Galaxy Tab many times in the past, and have found that no custom rom is 100% fully functional. I appreciate the innovation but many times i have found it to be more of a pain than an improvement. I am running ICS and after this update i am looking forward to hopefully get JB for the Google Now function. Even if ICS source code is release and someone manages to cook something up with the already released JB source code there will always be something that does not work 100% no matter how hard one tries. I have come to the conclusion that only official firmwares are the way to go. Nevertheless good luck and keep up the good work. Once again not trying to be disrespectfull, that was not my intent. If i have disrespected anyone i appologize in advance but i believe i may not be the only one to think this way.
Sent from my GT-P6800 using xda premium
Because some of us actually like to tinker with this kind of stuff regardless of what does or doesn't work and which he clearly posted.
Every phone has CM9 threads and none of them are 100% functional as of yet.
Nice job on the release. :good:
Can i restore data from cwm after flashing this rom?
Sent from my GT-P6800 using XDA Premium HD app
WHy release a beta ? Well, because the community willl help make it final. Should the op really go through all scenario's himself?
That would take valueble time, otherwise well spent on other things. It's a community thing, you get it, or you don't
I really liked your previous quicksilver efforts, so I'll probably get this, but as an Android newbie, can someone answer a question for me. If I'm going to be running Apex Launcher anyway, what benefit does CM9 bring over a more minimal rom?
can i flash it on my 6810?
rony-x2 said:
can i flash it on my 6810?
Click to expand...
Click to collapse
Don`t you bother to read , it is there in the subject clearly for 6800 , and the OP also clearly mentioned in his 1st post "And No, you can not upgrade from HC and it only works on P6800 for now."
This firmware runs counter?
neimovirne said:
This firmware runs counter?
Click to expand...
Click to collapse
No, its flashed in cwm and does not include kernel or baseband.
lowtraxx said:
What works
- WiFi
Click to expand...
Click to collapse
What did you do to fix this? Just use the stock kernel + modules? Neither of your links are working for me so I can't look at what you did.
- 3G
- Camera (front/back)
- Gyroscope
- Rotation
- Calls (But UI is broken ATM, so you are not able to hang up a call)
What does not work
- Bluetooth (working on it)
- Automatic Backlight dimming
Click to expand...
Click to collapse
Probably as simple as using /system/lib/hw/lights.exynos4.so from the stock rom. I haven't gotten around to fixing the opensource liblights for the PX boards.
- A few minor crashes in Settings -> Storage
- Mtp (also working on it)
Click to expand...
Click to collapse
Good luck with that, samsung implemented their own MTP driver in the kernel that they use, but you have to use the ASOP MTP driver to work with CM.
The link is broken.!!!!!!!!
Sent from my GT-P6800 using XDA Premium HD app
acc_kareemomar said:
The link is broken.!!!!!!!!
Sent from my GT-P6800 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah, +1.
Both links for double check..
acc_kareemomar said:
The link is broken.!!!!!!!!
Sent from my GT-P6800 using XDA Premium HD app
Click to expand...
Click to collapse
faridaizuddin said:
Yeah, +1.
Both links for double check..
Click to expand...
Click to collapse
Whats broken exactly? The zip file? I just tried downloading and it worked.
lowtraxx said:
Whats broken exactly? The zip file? I just tried downloading and it worked.
Click to expand...
Click to collapse
HTTP 404 not found etc. for Drive.
Mirror link just work. Before this the page/download was no go..
Downloading using mirror link anyway! Thanks! :good:
Although this kernel is ended. I think I should put the downloads here:
http://sourceforge.net/projects/maxfuacm/files/Kernel/HydraNirvana/GT-N7000/
Critical Remind:
Flashing this kernel will make your phone Lose Warranty. So please Fully Get Understand of what you are doing. I have no responsibility of any of your lose by flashing this.
Before you download and flash, to farthest avoid bootloop or bricking your phone, please make sure you have read and understand sections from 4 to end.
Please be wisely use the "search this thread" at the top right corner, if you can not see it, click
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there. And be sure you have already read the OP. New-asked-but-already-answered questions will be ignored and maybe disliked or even scoffed by other members.
I will never talk about ETAs (Estimated Time of Arrival). So please save your keyboard or touchscreen.
Please forgive me if I did not answer your question, even you asked before some one I answered. Please informe with message if you need me to answer it. Although I can not guarantee I will answer questions promptly, the carefulness of the answers is guaranteed. If the answer is important to you, please bookmark it cause I may edit the answer post with update instead of posting another one.
And if anyone don't like any part of my word. Please send me a message instead of posting here. All words above are my begging for the nattiness of this thread. I won't open another thread of discussion, cause I saw the discussion theads were mostly useless. Holding one thread is easier.
Thanks to:
@g.lewarne, @hardcore, @chandler929, @Formhault, @androidindian, @noteandfound, @chasmodo, @TeamHacksung, @samsung, @CyanogenMod team, ......,
and a lot of names to add.
Brief:
First, I would like to thank the people I mentioned and not mentioned in section 2. Notably g.lewarne, you are always the owner of HydraCore. Thank you for your great work. Galaxy Note now became a legend with your masterpiece.
Secondly, I would like to thank all people who gave me support, encourage and advise. Under your help, HydraCore has became a really universal and almost perfect kernel.
In this new thread, the legendary Universal Kernel has a new name -- HydraCoreNirvana. I think the word Nirvana can tell the story of HydraCore. With the new name, the kernel steped onto a new stage -- bootable on JB leaks. It is not fully functional, but it is a good beginning.
I have to say that I am not a dev. And I am another Child's Slave who use lavatory time as off hours. I really don’t know how far I can go on this. So please, forgive me if someday I got stuck and be absent like Gavin.
......long after n6......
For a long time I kept absent. I really found it hard to go on especially after the CM team upgraded the Mali driver. I am not the right guy to do the library job. So I switched to Samsung Opensource codes.
The first thing I did was building the Speedmod. I succussed. Meanwhile I made a build with Speedmod kernel image and PhilZ touch recovery initramfs. These builds worked fine with new released TouchWiz Jelly Beans. However, the CM code is going away with the Samsung Opensource codes. There are too many differences between them. The HOME button key issue was one result of this. It is harder and harder to combine CM and TouchWiz in one kernel. It is not just an universal initramfs, the kernel image itself needs to be universalized.
So I have to make a lamentable decision that from now on, I will stick with Samsung Opensource codes. So TouchWiz Jelly Beans will be supported prior to CM and other AOSP roms which have good enough kernels. Legacy features of HydraCore will be transplanted to the new builds one by one with careful test. CM and other AOSP roms maybe bootable with the new builds, but the functionality will not be guaranteed.
At last, thank you all for your long time support. I will keep on building this kernel and try my best to keep it Hydra for everyone. But for now, I can only step on one side, and I choose TouchWiz.
......more to add......
Technical Description:
Safety: mem_cap_erase disabled, so this is a safe kernel.
ROM Support:
ICS (4.0.X):
TouchWiz Based: TouchWiz ICS fully supported. Official MIUI still can not boot to system, adb works.
AOSP Based: CM9 fully supported, AOKP and some PA......, and maybe other untested roms.
JB (4.1.X):
TouchWiz Based: TouchWiz JB, MIUI made by TWJB + Patchrom from http://www.miui.com/extra.php?mod=download/rom&fid=133 fully supported.
AOSP Based: CM10 fully supported, AOKP and some PA......, and maybe other untested roms.
JB (4.2.X):
TouchWiz Based: Not out even leaked yet
AOSP Based: CM10.1 has bootloop with display.
Recovery: CWM 6 non touch recovery from @Phil3759: http://forum.xda-developers.com/showthread.php?t=1927097.
Root privilege: ADB and LBE superuser.
Usage:
Place the ZIP in the TF card.
Root the phone: If you and if you are sure that you have a safe kernel with CWM jume to next. If you phone is unrooted, Flash the TAR version in Odin to get Root and CWM.
Now you may meet bootloop, Press UP + HOME + POWER until you see the CWM interface. (the phone will never boot to the system with a stock rom flashed a TAR version)
Flash the ZIP in CWM.
Enjoy
Please don't ask me how to use CWM. If you don't know, don't flash any kernel.
Download with Changelog:
Instructions:
These are SourceForge folders, so open in a browser. The corresponding source is included in the same folder.
Not all releases will be kept in this post, find the old ones in the repository. I will keep all files as long as possible. (It seems SourceForge don't delete old files.)
Little trick: maybe you can try middle-click the links, a new tab maybe opened.
Notice: If you met black screen or bootloop after flashing the tar file. Try the zip package (The recovery should be working). The standalong Mali libraries might fix the problem.
n16:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n16/
Changelog:
Kernel: Pushed kernel version to 3.0.83.
Defconfig: Reverted pmem settings to fix video overlap. The bug is reported fixed.
Defconfig: Reenabled Samsung MTP. The hang of the MTP software on my MIUI v5 TouchWiz Patchrom fixed.
Makefile: Brought more legacy HydraCore tweaks including cpu and fpu tweaks.
n15:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n15/
Changelog:
Kernel: Pushed kernel version to 3.0.82.
Network: Fixed wifi tethering.
Audio: Fixed mic in software like talking animals, recoders, etc.
Mali: Tweaked thresholds to reduce lag on some heavy interface like MIUI desktop. Further tweaks may be needed.
Tweaks: Some small tweaks.
Platform: Switched to coLinux. Now it is ideal for me. It is a real linux like vmware, it uses less resource like cygwin, and it is fast like a directly installed linux.
Toolchain: Switched back to Linaro 4.7 with LTO.
n14:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n14/
Changelog:
Kernel: Pushed kernel version to 3.0.81 with cma port.
Superuser: Switched to LBE superuser with some simple permission management.
Defconfig: Brought more legacy HydraCore options which may be not noticeable.
HydraFS: Some workaround to MIUI. Now official MIUI v4 can boot to adb, positive. But the system is still not usable.
Platform: Switched to cygwin.
Toolchain: Switched to cygwin 4.6.3.
Filename: Yes, X.Y.Fu is still me, it is my name in short.
test builds:
Link: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Testbuild/
These builds are test builds. They usually contains new features or fixes. These changes need test. Read the README file in folders for more information.
build environment:
Link: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Platform/
Just follow the readme file.
TODO and TOFIX:
Add Multi-ROM-on-SdCard support.
Investigate the reason of the CM10 and CM10.1 failure boot.
Make MIUI v4 bootable. Fix CM boot problems.
AOSP MIUI JB support.
Bring back more HydraCore features.
Bring ability to set GPU frequency. This is extremely hard to me.
Bring ability to set CPU voltages. Found the location of the settings. Working on it.
Bring more ability to alter the kernel without reflash.
Tweak all the script included.
Study on offcial source code of JB.
64GB cards. I am not sure. 64GB exceeds Fat32 limitation. and exfat is not supported correctly.
Vibration Strength not alterable on AOSP roms. I am still working on this, maybe compile two different modules will solve the problem.
Q&A Collection:
How to flash: like I said if you don't know how to flash, then don't flash. Or you can read section 4.
Can I flash on ...?: Please get to know you rom type, AOSP or TouchWiz based, then please read section 4.
Bootloop/Freeze/..., help!: please be concrete, I can not answer questions simple like this.
Possible reasons of Black Screen: From n9, standalong Mali libraries are located in the zip. Try to use the zip package. It might fix the problem.
Possible reasons of Bootloop:
Please check your rom type see whether your rom is supported.
Another reason is the unsuppored modules. Look in to /system/lib/modules if it exist. And delete dhd.ko, j4fs.ko, scsi_wait_scan.ko and Si4709_driver.ko if they exist. Deleting dhd.ko may also fix WIFI problem.
Possible reasons of Lag: Check the governor and IO settings. Or maybe just clean the RAM. At last, reboot.
Possible reasons of Freeze: Usually happens after a heavy load work. Try to reboot. Reboot usually works.
...adding...and...collecting...
Old Versions:
n13: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n13/
n12: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n12/
n11: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n11/
n10: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n10/
n9: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n9/
n8: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n8/
n7.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n7.JBT/
n6.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n6.JBT/
n5.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n5.JBT/
n4.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n4.JBT/
n3.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n3.JBT/
n2.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/6th_v7.6.JBT/
n1: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/5th_v7.6.2/
Great maxfu. You have a lot to say and we'd love to listen
Sent from my GT-N7000 using Tapatalk 2
Finally...
ANG.MAHAL.NG.NOTE.KO
maxfu said:
My sixth compilation with experimental TWJB leak support:
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/v7.6.JBT.1/
Click to expand...
Click to collapse
Seriously? We can finally OC the jb leaks? AWESOME!!!
I guess cm10.1 kernel is next?
ANG.MAHAL.NG.NOTE.KO
It's fantastic, thanks man.
Thanks man a new life for our great Hydracore..............
Another awesome release from Maxfu
thanks man.
Will it really work on JB Leaks ???
M waiting for ur reply ..... ill it really work on JB leaks ??? ( especially latest Ultimate Rom )
Immortal Nerd said:
M waiting for ur reply ..... ill it really work on JB leaks ??? ( especially latest Ultimate Rom )
Click to expand...
Click to collapse
I build this JB support with Ultimate XXLSA, should be OK with XXLSC. But please be in mind that it is experimental. AFAIK the camera service has problem.
Haints said:
Seriously? We can finally OC the jb leaks? AWESOME!!!
Click to expand...
Click to collapse
Yes, you will have OC. But camera maybe gone.
maxfu said:
I build this JB support with Ultimate XXLSA, should be OK with XXLSC. But please be in mind that it is experimental. AFAIK the camera service has problem.
Click to expand...
Click to collapse
Is there any critical problems in the sixth compilation for leaked jb? If not, I well flash this right away
Edit : so the camera is break in the latest kernel? Hmm alright I think I will wait for the next compilation really great work maxfu, thank you for make the hydra core can run in leaked JB :good:
XXLSC Wait,.,
Sent from my GT-N7000 using xda premium
Is video camera, 1080 works for with cm10 rom?
Escaped from cuban Asylum. Cell 462
Should be. But not on CM 10.1
cuba462 said:
Is video camera, 1080 works for with cm10 rom?
Escaped from cuban Asylum. Cell 462
Click to expand...
Click to collapse
Hi maxfu. The original HydraCore 7 is unsupported by the awesome jellybam. This would be?
Sent from my GT-N7000 using xda premium
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
capu81 said:
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
Click to expand...
Click to collapse
download it again ?
capu81 said:
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
Click to expand...
Click to collapse
Have you already checked md5?
ANG.MAHAL.NG.NOTE.KO
noteandfound said:
Have you already checked md5?
Click to expand...
Click to collapse
Oh, yeah, sure, no doubt...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description:
This is a standard base CM10.2 built from thr latest nightly source, with the SGT7 framework, launcher, and settings enhancements.
This ROM will mainly appeal to people who desire a clean stock-like CM10.2 experience with a more feature-rich interface; it is automatically built on a nightly basis, meaning you will always get all the latest CM10.2 merges.
Credits:
+ @sbradymobile - SGT7 Developer
+ @chasmodo - Build Support and Friend
+ @AndroidSlave - Device Maintainer
+ @Ravensysteam - Graphics
+ @Entropy512 @XpLoDWilD @codeworkx (ex) CM Team - N7000 Developers
Thanks:
+ @AA1973
+ @zai89
+ @not-i
+ @Gerrett
+ @Galaxtus
+ @ThaiDai
Known Issues:
+ Any CM10.2 Issues
To Do:
+ Setup OTA, and remove CM Updater
Download Links:
ROM: http://www.goo.im/devs/asf58967/n7000/sgt7_nightlies
GAPPS: http://www.goo.im/gapps
Disclaimer:
This Firmware Is "As-Is", Meaning There Are No Express Or Implied Warranties Of Use.
I take no responsibility for you bricking (breaking) your device or anything associated with thereof by use of this firmware (ROM). I make no express or implied warranties of this firmware's quality of fitness for any general or particular purpose, nor do I take any responsibility for any actions associated with the flashing (installation) thereof. This firmware is provided on an as-is basis, and by downloading and installing any files linked on this thread, you agree to such terms. You, and you alone, take full responsibility for any damage to your device this may cause.
By Flashing This Firmware You Assume The Risk.
This disclaimer of warranty cannot be waived. I have tested this on my personal device, and yes, it works for me; but that doesn't mean it will work for you. As is the standard and impliedly understood practice with any modding of your device, the risk is entirely yours. By flashing this firmware on your device, you thereby Expressly Assume The Risk of all natural, unnatural, foreseeable, or even unforeseeable consequences therein. Also, by flashing this firmware, you expressly agree to all of the express and implied terms of this Disclaimer Agreement. You have been warned.
Sources:
+ Kernel: https://github.com/TheMuppets/proprietary_vendor_samsung
+ CyanogenMod: http://www.github.com/CyanogenMod
+ SGT7 Modifications: http://www.github.com/sgt7
Installation Steps:
1. Be on a safe kernel, and be aware of the n7000 Brick Bug.
2. Backup your EFS (using kTool) [Optional, but Highly Recommended].
3. Boot into recovery.
4. Make a Nandroid Backup.
5. Wipe /system /data /cache dalvik-cache /preload and .android_secure.
6. Flash ROM zip file in CWM recovery.
7. Flash gapps for 4.3 (Click Here to Download from Goo.Im).
8. Reboot.
9. Wait a few minutes for the dalvik cache to propagate.
10. Follow on-screen setup instructions.
Upgrade Procedure:
1. Be on a safe kernel, and be aware of the n7000 Brick Bug.
2. Backup your EFS (using kTool) [Optional, but Highly Recommended].
3. Boot into recovery.
4. Make a Nandroid Backup.
5. No need to do a full wipe unless major update.
6. Flash ROM zip file in CWM recovery. (Note: if you have issues w/ gapps after restart, then flash gapps too *CM10.2)
7. Wipe /cache and dalvik-cache [Optional, but recommended].
8. Reboot.
9. Wait a few minutes for the dalvik cache to propagate.
NOTE: A Full wipe should not be necessary when upgrading from Official CM10.2, but be sure to have a nandroid backup just in case.
Bug Reporting:
As this is a CM10.2 build with the SGT7 modifications, it is your responsibility to search the CM10.2 thread for bugs. Only post bugs relates to the SGT7 enhancements here, DO NOT post CM10.2 related bugs here.
thanks
AndroidSlave said:
Save2
Click to expand...
Click to collapse
downloading........
this rom seems to be a masterpiece ... I would like to try it! It has halo2? Thanks
mimmolm said:
this rom seems to be a masterpiece ... I would like to try it! It has halo2? Thanks
Click to expand...
Click to collapse
Please read the known issues section of the OP.
AndroidSlave said:
Please read the known issues section of the OP.
Click to expand...
Click to collapse
ohps...sorry I had not seen it! However....in download Thanks for your beautiful works! :highfive:
Awesome graphics in your post mate. Do you do them yourself? Gonna try your rom though. Never actually tried a cm rom. Very nice work :laugh:
EDIT: looks great man. I like it :good:
not-i said:
Awesome graphics in your post mate. Do you do them yourself? Gonna try your rom though. Never actually tried a cm rom. Very nice work :laugh:
Click to expand...
Click to collapse
@Ravensysteam made them for me... He may be willing to work on something for you when he has a chance
Re: the ROM, just remember that cm10.2 is still experimental, but my 10.1 build of this same rom is entirely stable... (Different thread)
for the moment it seems to be perfect
Unfortunately the HALO 2 merge broke some stuff so I pulled it for now. Will post back once it's resolved.
Consequently I am also going to turn off the nightlies server until its fixes.
However the august 20 build that is up is working great!
Thanks,
J
Removed. Sorry. One other little bug to work out.
Everything worked fine on a dirty flash but when I tried a clean flash the notification for preparing SD card lasted forever.
AndroidSlave said:
Removed. Sorry. One other little bug to work out.
Everything worked fine on a dirty flash but when I tried a clean flash the notification for preparing SD card lasted forever.
Click to expand...
Click to collapse
I had that bug on FSC ROM sometimes too but a reboot (or several reboots) fixed it after a while... dunno really what was the cause
Greetings
Ravensysteam said:
I had that bug on FSC ROM sometimes too but a reboot (or several reboots) fixed it after a while... dunno really what was the cause
Greetings
Click to expand...
Click to collapse
What's weird is the August 20 build is fine. But after the halo merge the bug appeared. Anyhow I've been on the 8/20 build for a couple days now and haven't noticed anything except CM related issues
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta on a dual boot system running fully featured Ubuntu touch and Firefox OS
Build 26/08 is running fine. Until now no problems. I'll keep on testing tomorrow
Thanks!
Goggle81 said:
Build 26/08 is running fine. Until now no problems. I'll keep on testing tomorrow
Thanks!
Click to expand...
Click to collapse
Do you have the notification bug? Do you have an external SD card?
I didn't mean to release that build there are still some bugs like tablet ui FC
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta on a dual boot system running fully featured Ubuntu touch and Firefox OS
External SD is working.
Till now I found the notification bug (you mean in the settings?) and some strange settings with dual pane. But these are just little bugs
Goggle81 said:
External SD is working.
Till now I found the notification bug (you mean in the settings?) and some strange settings with dual pane. But these are just little bugs
Click to expand...
Click to collapse
Can you do MD a favor and post the exact bugs you are talking about and where they are found so they can be fixed? Thanks man
The notification bug I am having is that the Preparing SD Card notification never goes away, ever...
Right now I am on Illusion. But I had a "settings closed" as I tried to enter notification bar settings. Also dual panel settings forced a settings closed (I am German, but I hope the translation fits for you)
If wanted I can send you some screens in the afternoon
Goggle81 said:
If wanted I can send you some screens in the afternoon
Click to expand...
Click to collapse
Logcat would be much more helpful.