Database Develop

Updated [16/11]: [App] [G-Sensor] [Brand New] The XSense v1.0

Credits:
Foremost, let us all acknowledge Koushik for his brilliant "Sensors" library upon which most if not all non-HTC apps that use the G-Sensor, Light-Sensor, and Navi-Sensor are built, simply ingenious. Moreover, I would like to recognize No2chem for the NeuLed2 library which is an equally exquisite peace of code that allows access to the Diamond/Pro Leds. Without those two guys, accessing these advance interfaces on the diamond/pro would be inapproachable at best.
Reason: Since I bought my Diamond, I constantly thought HTC gave it a lot of sensors but nearly no .."Sense".
......... X-Sense ...........
* Hopefully, an innovaton & integration of RANDOM but needful features...
Features:
1. Courtesy Settings:
- Select Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down (duh!).
- Automatically activate/deactivate the Speakerphone during phone calls depending on the phone's posture. In other words, if you're not holding the phone up then it will automatically activate the Speakerphone.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it at customizable intervals: Missed Call(s), Voice Mail, and SMS only.
3. Stylus-Sense:- When the Stylus is in/out: Will play faint sound + Blink the Back button's light +/Vibrate. Moreover, the device will vibrate whenever you move it at customizable intervals.
- When the Stylus is out and the device is moved: Device will vibrate twice on every posture change + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes ON until the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this.
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: Your phone will suspend if you hold it up-side-down (duh!)
- Light Navi Button When Suspended: Will do just that. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
6. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
Logic:
- During phone calls, All features are suspended except the Speakerphone-specific code.
- Program will respond to posture changes only 2 seconds after they have occured, this is to
avoid unintended operation ( as much as possible ).
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and enjoy the merits of your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
Requirements:
.NET 3.5 + Diamond or Raphael.
Restrictions:
Only for the Diamond/Raphael (vis-a-vis, it will crash on any other device!)
Bugs/Limitations:
Knock yourself out...
Disclaimer:
This program is provided strictly on "as is" basis. It is intended only as a proof-of-concept. Although fully functional, it must NOT be considered for daily use. This software is very likely to compromise the integrity of your data as well as invariabley cause your device to malfunction in any way, shape, or form. Therefore, the developer shall be absolved of all responsibility towards testers and/or their computers & devices. While using this software you agree to be solely liable for all and any damages you do to yourself, your device, or any damn thing you possess and care for!
Release Notes:
- Download & Install the CAB
- Run the XSense from your Start Menu\Programs, customize to taste, and enjoy!
- IF you want it, download it from the Diamond section.
NOTE: Further releases/upgrades will NOT work on the Raphael/Diamond PRO.

wheres the cab?

Cab?!?
This program sounds sweet.. Im willing to give it a go, but no cab.

This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed

klasital said:
This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed
Click to expand...
Click to collapse
I fell for that too man, it was NOT funny tho! Its October btw..

shirreer said:
I fell for that too man, it was NOT funny tho! Its October btw..
Click to expand...
Click to collapse
And you still haven't posted the app...
Roger

96cobra said:
And you still haven't posted the app...
Roger
Click to expand...
Click to collapse
Released: On first post.

Release: available on the first post. Tell me what you all think (compliments/complaints)...

shirreer said:
Release: available on the first post. Tell me what you all think (compliments/complaints)...
Click to expand...
Click to collapse
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice

Nice but . . .
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?

XERO_Racer said:
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice
Click to expand...
Click to collapse
Go right on man, and thanks for the "cheer up". Enjoy

jewill00 said:
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?
Click to expand...
Click to collapse
Tell me more:
- Did the stylus-out/in sound EVER play?
- Did you change the original wav files?
- Is the phone's system volume (not the Ringer) loud enough to be heard?
Notes:
- The wav files (in.wav and out.wav) are supposed to be in the same directory as the program.
- The original wav files are subtle, they are meant to merely "hint" at you.

Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.

bedobela said:
Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.
Click to expand...
Click to collapse
Thank you mate. I intend to create a settings screen altough that would be both cumbersome and useless for the current feature-set except for the stylus sounds.
I am thinking of adding a launcher to the stylus events, perhaps a new note would open on stylus-out, then save+close on stylus-in.. who knows, eh?
As for the missed call......LOL... I think that's just the point ...Seriously though, WM devices cannot survive the battery strain if they don't sleep (suspend). So, we do with what we got
Cheers

only issue i am having is.. I would prefer not to have the navi lights on all the time... whether the phone is face up or down my navi lights are always on

Short Review
ok soo far i tested the app and i have to say is this is a real good app, only problems im encountering is the vibration is very very faint, but i guess thats ur deal of conserve battery life? theres no problem to it and besides...speaking of battery life, leaving the NavLight on and messing around with the app for 5 mins straight didnt even take a percent off of my battery, ill try for a more deeper battery challenge but anyways, heres a list of suggestions, pros and cons, btw this app makes my TouchPro look 5000 times more cooler too something ive been wanting on this phone
PROS:
-Courtesy Sense seems to be very effective
-doesnt kill my battery much(yet)
-not a CPU Heavy app, still can run TP flawless
-Stylus Sense is responsive
-not a memory heavy app
CONS:
-Response of every "sense" is very slow, takes like 2 seconds to switch
-Courtesy Sense can sometimes be out of control, can possibly switch the volume off and on since i have my TP in my vertical case(but that can be fixable i guess)
-Cant close the app(if user decides to) but theres a way to close it through task manager(not HTC TM though)
-Backlights dont light up anymore if app is in use
-Cant unmute unless you switch the device on
Suggestions:
-Make a settings menu where u can adjust the poll speed and sensitivity and what Senses you can turn Off or On
-Should make the Stylus notification light blink every 15-30 seconds or 1 min at the most
-Also to add on the Notifications Sense is the famous blinking LED Light whenever you shake the device
-Close/Exit option onto the app
-When the device's volume is set on silent or vibrate, the Common Sense should be turned off until the device volume is set back to normal
-and probably something crazy, the Party Light Mode, where you can make the lights blink with noise or fade different paterns or blink with some random pattern just for FUN lol
Overall Score 9/10 and thats my honest opinion...this is a great app especially in Alpha stage
Video Review coming up this weekend, ill be posting a link soon, thnx for the great app

Video Review
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY

XERO_Racer said:
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY
Click to expand...
Click to collapse
Bro, let me thank you for a VERY groovy flick, I enjoyed every bit of both your written and video reviews.
I must praise you further for a great job at a thorough & constructive critique. Your stylish review and suggestions are valuable and are noted with all due enthusiasm. I will try my utmost to reflect what I can on my next attempt - the Beta. Also, I will contemplate creating this "feast of lights" you're craving as a token of gratitude for your effort
Cheers

Here's v1.0 ... fully customizable.

This seems to be unneeded around here, So... for the few who want it, y'all can download it from the Diamond Section - In the meantime, I'll be contemplating ways of making new versions unusable on the Raphael for the obvious unpopularity of this device, and equally evident lack of enthusiasm from those who have it
Cheers

[ROM][22/07]- Wild Ginger – Gingerbread 2.3.4 AOSP – [DISCONTINUED]

This ROM is DISCONTINUED
I am sorry to say I don't find the time to further develop this ROM, if anyone wants to continue this ROM please do so. Just pm me and it's fine. Thanks for using this ROM and for your feedback. Maybe in the future I will begin a new ROM project. For now I am only developping a ROM Download Manager for the desktop, keep an eye on the portal .
Go check it out for screenshots and download :
http://h4oxer.wordpress.com/category/wild-ginger/

i`ll give a chance this evening ... looks nice

I have been using this ROM for the last hour or so. I did a backup, clean wipe and fresh flash. I have let the new ROM settle and have done a manual reeboot also.
I am a humble end-user and not a dev but thought that I would give a breakdown of some of my first impressions and observations.
I like the boot annimation alot, I also like the lock screen. Both look clean.
I like the orange font used in the status bar and the pull down menu although the "Wild Ginger" wording in the drop down menu is very blury and looks ugly.
The window transistions are smooth as you like but don't feel snappy quick.
I think the new honeycomb launcher is a nice touch but doesn't seem as intuative as the regular launchers such as ADW; maybe it's because I'm not used to honeycomb yet.
My main gripe about the Honeycomb launcher is that it force closes ALL the time. I have been trying to remove the Google search bar widget that is pre-loaded on screen after first boot and it is impossible (and the widgets aren't even locked to desktop). Also I can't ADD any additional widgets - you can select a widget to add but nothing happens!
From the main screen, waiting for the menu to appear takes about 5seconds which is an age. The "Personalise Honeycomb" menu doesn't fit the whole screen and you can see thick band of the desktop down the right of the screen which is ugly.Once in the preferences menu it isn't at all clear what you are meant to do... You can see the "Apply Settings" button but it took me tapping about the rest of the screen to finally make the actual preferance choices appear.
I have tested inbound and outbound calls and wifi both work as standard. The music player has nice interface, camera works and stock browser is fine. I don't like the dark blue highlight that appears when you press on an app icon it looks clumsy.
The numbers 1,2 and 3 are almost cut in half in the dialer and the green phone "call" icon doesn't seem to fit in it's area neatly.
I like H4oxer's work on this ROM and I hope it continues to get better but with these quite apparent bugs I will respectfully wait for an update before I continue to use this ROM.
Good Work tho!

so ...
good review above .... absolutelly uselless to say more ... 100% same opinions as you EDD ! keep going h4oxer !!!

Thanks guys I really appreciate your feedback ! Will work on it!

h4oxer said:
My Gingerbread AOSP ROM is finally ready , had a lot of exams and vacation and stuff.
Go check it out for screenshots and download :
http://h4oxer.wordpress.com/category/wild-ginger/
Enjoy and let me now what you guys think.
Cheers,
H4oxer
Click to expand...
Click to collapse
Very cool. Did you manage to get video recording working?

xdbg said:
Very cool. Did you manage to get video recording working?
Click to expand...
Click to collapse
from his blog - "Used the froyo libcamera.so library to use the camera app, capturing video still gives force closes."
I guess not

No it doesn't work..still looking into that...has something to do with gpu that we don't have!
Sent from my HTC Wildfire using XDA App Premium

tried to flash but no luck stuck at splash screen,did wipe,factory reset,dalvik...how long was first boot for you guys?

You'll have to wait 5-10 minutes... leave it for 10 minutes on first boot..

why I cant see any progres in progres bar in recovery,says instaling update ...
(now no progres of writing files) and afther just 10-15 sec instal complete,is this normal? usualy can see progres and takes a bit longer

Yes it's normal, I didn't payed attention at the progressbar while writing the updater file , but it works don't worry. It installs fast because it had not much apps on board. Just the essential.

10min past stil on my splash screen.no boot animatio yet

luxandroid said:
10min past stil on my splash screen.no boot animatio yet
Click to expand...
Click to collapse
Wierd. This ROM is working fine for me. Did you wipe /data and /cache?

yes did everything...dont know simple not booting,stucked on splash screen not even bootanimation

OK....first impressions are good. Startup in less than 4 minutes. Looking good. Everything is working out of the box, no force closing or similar problems. Nice themes, Market app is interesting
LCD density set to 115 and dialpad and everything else looks good
need to be done
- icons in status bar - phone signal at least
- trackpad wakeup
- sound on lock/unlock
- 6x5 icons is too much... 4x5 would be better in my opinion
- Home screen - same as above
- when LCD density changed no way to add widgets or apps to home screen
all in all very good rom, but need a little bit of fixing
cheeers

rikee said:
OK....first impressions are good. Startup in less than 4 minutes. Looking good. Everything is working out of the box, no force closing or similar problems. Nice themes, Market app is interesting
LCD density set to 115 and dialpad and everything else looks good
need to be done
- icons in status bar - phone signal at least
- trackpad wakeup
- sound on lock/unlock
- 6x5 icons is too much... 4x5 would be better in my opinion
- Home screen - same as above
- when LCD density changed no way to add widgets or apps to home screen
all in all very good rom, but need a little bit of fixing
cheeers
Click to expand...
Click to collapse
Totally agree with u.
I hope that in next version it will have trackpad & volumes wakeup to ... protect our Wildfires' poor Power Buttons

Nobody is interested in this rom?

thuanngotau said:
Nobody is interested in this rom?
Click to expand...
Click to collapse
Yes... I am very interested. I tryed it and found a few big bugs. I'm waiting for an updated version and I will use it again!
Sent from my HTC Wildfire using XDA Premium App

Me too ! I'm looking forward for more changes
Sent from my HTC Wildfire using XDA App

[APP] JotPad -[U]- 7/Dec/2011

JotPad v1.1
Hi guys, I'm posting my app here, and I'd like you guys to let me know what you think about it, and what should be improved. Just post in this thread and I'll be notified and get back to you.
Here's a short description (so you don't get bored), for the full description just visit the app page.
Have you ever need a pen and paper to help illustrate your ideas during a conversation but couldn't find any? Someone is asking you for directions and you really want to do a sketch to help the explanation? Look no further, the JotPad app is what you need, use it to jot down anything you need!
Click to expand...
Click to collapse
Some of the features are Live Tile and multitouch support, as well as various colors and image backgrounds and shake to clear.
Download Link: http://windowsphone.com/s?appid=dd496842-8119-4420-9bc6-1d39a58a6b87

I like it
How about allowing multiple drawings and saving items: inside the app, or as a JPEG, or share by e-mail.
Rated 5 stars

Oh thank god! I have been searching for a draw/note app that support zoom, and here we have it; have a thanks mate!

z_rudy said:
I like it
How about allowing multiple drawings and saving items: inside the app, or as a JPEG, or share by e-mail.
Rated 5 stars
Click to expand...
Click to collapse
Thanks mate! Yeah, I have the same ideas as well, but hadn't considered the share by e-mail option before, thanks for the suggestion!
fiinix said:
Oh thank god! I have been searching for a draw/note app that support zoom, and here we have it; have a thanks mate!
Click to expand...
Click to collapse
Thank you for your support, I'll have more stuff added when I have the time (doing this on my free time). If you feel like the app is missing something just let me know and I'll try to implement it.

I love it too! so cool, clever and clear= best handwriting app by faaaaaaaaar!
shake to clear screen I rate your thread and your app on market place with
ps. can you set the pen active as default by start?

mirolg said:
I love it too! so cool, clever and clear= best handwriting app by faaaaaaaaar!
shake to clear screen I rate your thread and your app on market place with
ps. can you set the pen active as default by start?
Click to expand...
Click to collapse
Thanks!!
About setting the pen active as default on start, I will look into that. But I'll explain my rationale of why I did it that way. When you swap between apps the guidelines for app developers say that the app should preserve all of it's environment, so if you were erasing lines on my app, and then you went for some facebook browsing and then came back to my app you should still be in erasing mode since that is what you were doing when you left.
I suppose I could set the pen as active when you start the app and retain the drawing/erasing mode when just multi tasking?
EDIT: I just noticed you have a tablet with Windows 8. :-O Cool stuff, how does Windows 8 work on that? I've only used it on a regular laptop. What about the battery life, does it last long?

Good. I will have a try. It sounds nice.

glowwormccc said:
Good. I will have a try. It sounds nice.
Click to expand...
Click to collapse
Thanks, let me know what you think after you gave it a good try.

A simple but useful app~
very gd!

Hi works great in app, the live tile is a little wonky though, text gets cut off and moved up a lot of the time, ie if you write one word on a angle it puts it top left and cut off, or if you write 4 words underneath each other, can only see the bottom 2 the others have moved up (there is space below so room on the tile to display) other than that love it.

frakius said:
Hi works great in app, the live tile is a little wonky though, text gets cut off and moved up a lot of the time, ie if you write one word on a angle it puts it top left and cut off, or if you write 4 words underneath each other, can only see the bottom 2 the others have moved up (there is space below so room on the tile to display) other than that love it.
Click to expand...
Click to collapse
I know what you mean, I've made it like that because of the following problem. The drawing page is rectangular but the live tile is perfectly square. How do you fit something that's rectangular (to fit the 15:9 screen of the phone) into something that's square (the live tile is obviously 1:1)? I had 2 options, either distort the rectangular drawing to fit, or to crop a square from the centre of the drawing. I used the latter, I cropped a square from the centre. That's why the live tile is missing the top and bottom of the drawing.
One last option would be making the pages square so all of the drawing can fit on the tile, but I thought it would look weird and wouldn't fit the phone's screen. But if you do have an idea on how this should work by all means let me know ok? Thank you very much for your comment!

Weather Flow background stopped moving

Hello, not sure if this is the right place to put this, the thing is my Weather Flow medium live tile has stopped moving (like photo live tile moves), have no idea what happened.
Tried all kind of solutions i could find on the web, unpined it, reinstalled it, deleted IE history, restarted the phone etc.. It's still not moving, and it looked damn fine when moving
Anyone got some solution? Thanks..

The images on third party live tiles cannot move.
The tiles can flip around and show different images/text, but they cannot move in the way that the Photos tile moves (the slow pan of the photo, and then a fast slide to the next photo).
Totally forgot about iconic since barely anyone uses it. XD

prjkthack said:
The images on third party live tiles cannot move.
The tiles can flip around and show different images/text, but they cannot move in the way that the Photos tile moves (the slow pan of the photo, and then a fast slide to the next photo).
Click to expand...
Click to collapse
Actually, in WP8 (even in WP7.8 i believe) they can move.
It's called an iconic tile.
The reason it stops moving is because you probably exceeded the maximum number of live tile processes you can have running around in the background.

mcosmin222 said:
Actually, in WP8 (even in WP7.8 i believe) they can move.
It's called an iconic tile.
The reason it stops moving is because you probably exceeded the maximum number of live tile processes you can have running around in the background.
Click to expand...
Click to collapse
Hey cheers for reply, actually i only have Weather Flow and Photos as a medium live tile, or the ones that move around and flip. I have Here Maps and Here Drive as medium but they don't do anything.. now i'm hearing that the Weather Flow never moved it's background, could it be that i've imagened it? Anyone willing to test this?

Boris Lozac said:
Hey cheers for reply, actually i only have Weather Flow and Photos as a medium live tile, or the ones that move around and flip. I have Here Maps and Here Drive as medium but they don't do anything.. now i'm hearing that the Weather Flow never moved it's background, could it be that i've imagened it? Anyone willing to test this?
Click to expand...
Click to collapse
No. the actual number of tiles on the screen has little impact.
go to settings>slide to application>background tasks.
If too many are running, live tile processes may not be getting to run anymore, thus the live tiles will die.
You certainly did not imagine it, tiles like the pictures hub are available for third parties.

Just checked, disabled some like My notes, Here drive is allowed but i've made it a small tile. Atm only Here drive and Weather Flow are allowed, and it's still not moving..
I was thinking if someone can confirm to me that Weather Flow actually does move it's background

Boris Lozac said:
Just checked, disabled some like My notes, Here drive is allowed but i've made it a small tile. Atm only Here drive and Weather Flow are allowed, and it's still not moving..
I was thinking if someone can confirm to me that Weather Flow actually does move it's background
Click to expand...
Click to collapse
Maybe there is a problem on their end.

[Q] What feature do you want in a clock app?

Hi everybody here,
I'm an Android developer for years, but now I want to try something new in Windows Phone section. Currently, I want to create a clock app with beautiful and smooth UI for free. I want to ask you guys here about, what feature do you want a from a clock app?
Now I should have: hour/minute/second/mini-nanosecond clock; alarm; timer with animation and translucent theme
Do you guy want anything else? Customization maybe? Just let comment!
Thank all!

A text-clock (e.g. no 12:30 but TWELVEthirty). Not very useful but it's trendy lol

gigsaw said:
A text-clock (e.g. no 12:30 but TWELVEthirty). Not very useful but it's trendy lol
Click to expand...
Click to collapse
Sure, that's also my favorite too :good:

Binary time on the lockscreen, it doesn't matter if its every minute or every half an hour. I asked someone else to implement that, but they didn't want to put the time in.

thals1992 said:
Binary time on the lockscreen, it doesn't matter if its every minute or every half an hour. I asked someone else to implement that, but they didn't want to put the time in.
Click to expand...
Click to collapse
Afaik, we can not have a custom real clock at lockscreen, so it should be a trick to use a dynamic image which have current time drawn in it. So if the "clock" is updated every minute, it should be harm to battery.
I will discover more to know if there is another way to do it. Thank you!

Can we have a clock that is updated "on-sight" in WP8? It's not possible, is it?
I would want a clock with various style options: analog, digital, text, binary,... The HTC Sense style clock is great also.
And implementation of stopwatch or countdown timer? Metronome and alarm?
A customizable double-sided live tile.
A clock updated every minute will drastically drains battery, while a clock updated every 30 minutes doesn't really count as clock, I think.
So it'd be better to have an option for switching between real time, 1 minute, 30 minutes or manual update mode, for personal preferences? Like we don't need the clock updated while asleep, do we?

Moon.lSd said:
Afaik, we can not have a custom real clock at lockscreen, so it should be a trick to use a dynamic image which have current time drawn in it. So if the "clock" is updated every minute, it should be harm to battery.
I will discover more to know if there is another way to do it. Thank you!
Click to expand...
Click to collapse
You could always use static images and have it updated every 15ish minutes. Anyways I don't think every minute is plausible for an app that sets the lock screen could be efficient anyways. e.g. Fuzzy time
Sent from my RM-860 using Tapatalk

Another request, a sideloadable version that updates its Live Tile every minute

Gnad said:
Can we have a clock that is updated "on-sight" in WP8? It's not possible, is it?
I would want a clock with various style options: analog, digital, text, binary,... The HTC Sense style clock is great also.
And implementation of stopwatch or countdown timer? Metronome and alarm?
A customizable double-sided live tile.
A clock updated every minute will drastically drains battery, while a clock updated every 30 minutes doesn't really count as clock, I think.
So it'd be better to have an option for switching between real time, 1 minute, 30 minutes or manual update mode, for personal preferences? Like we don't need the clock updated while asleep, do we?
Click to expand...
Click to collapse
Added customization like you said is my future plan. And I don't get you at "double-sided" live tile?
thals1992 said:
You could always use static images and have it updated every 15ish minutes. Anyways I don't think every minute is plausible for an app that sets the lock screen could be efficient anyways. e.g. Fuzzy time
Sent from my RM-860 using Tapatalk
Click to expand...
Click to collapse
Hmm, I will think about appropriate way to update lockscreen without effecting too much to battery. Ofc, we don't need update clock when we dont use phone.

Moon.lSd said:
Added customization like you said is my future plan. And I don't get you at "double-sided" live tile?
Click to expand...
Click to collapse
The live tile is flippable, so we could have a clock on one side, and calendar/weather/to-do/more clocks/whatever on the other side?

th0mas96 said:
Another request, a sideloadable version that updates its Live Tile every minute
Click to expand...
Click to collapse
Gnad said:
Moon.lSd said:
Added customization like you said is my future plan. And I don't get you at "double-sided" live tile?
The live tile is flippable, so we could have a clock on one side, and calendar/weather/to-do/more clocks/whatever on the other side?
Click to expand...
Click to collapse
I got it :good:
I have started designing the app, should be completed incrementally soon. I will post some alpha version in XDA at about one or two weeks, maybe late because I'm on final thesis in my university. Thank everybody again!
Click to expand...
Click to collapse

Moon.lSd said:
I have started designing the app, should be completed incrementally soon. I will post some alpha version in XDA at about one or two weeks, maybe late because I'm on final thesis in my university. Thank everybody again!
Click to expand...
Click to collapse
Take your time and don't rush it, just to meet that time frame. You could always just share the source if you need extra pairs of eyes and someone to clean code. ?
Sent from my RM-860 using Tapatalk

thals1992 said:
Take your time and don't rush it, just to meet that time frame. You could always just share the source if you need extra pairs of eyes and someone to clean code. ?
Sent from my RM-860 using Tapatalk
Click to expand...
Click to collapse
Hi people, sorry for no update from last time.
I have just published my very first version of the app with name 'Second'. Currently it just has very basic feature like: clock, alarm, reminder, stopwatch and timer. Now development status will be updated in this thread:
http://forum.xda-developers.com/showthread.php?p=48773761
Click to expand...
Click to collapse
Windows Phone Store:
http://www.windowsphone.com/en-us/store/app/second/1f2bdaf6-8152-48d2-9a34-5943d4ec29d4
Click to expand...
Click to collapse
Thanks everybody for your ideas,

Hi, i just want to see time on live tile update real time in every minute..!!! i dont like this bull **** updating after 30 or 40 minutes.. what is the purpose of a clock when i cant see the actual time on my start screen and plz make weather clock too

an alarm (of course) but with an option to disable the snooze button