[Q] stuck at fea core recovery - Galaxy S I9000 Q&A, Help & Troubleshooting

I flashed 2.3.6 on my i9001 and made a a reset from the android settings,
my phone restarted then,
not booting the system but the fea recovery menu (I installed this before: http://forum.xda-developers.com/showthread.php?t=1434586 ).
What went wrong and what do I have to do to use my phone again?
Thanks in advance!
( I tried already: wiping all caches and doing another reset from that menu, also used "fix permissions" but do not quite know what it does)

What happens when you select reboot phone ?

kind of a similler thing also happned to me
i suggest u flash a new stock kernel then root it then u can restore from ur recent backup
Sent from my GT-I9100 using XDA App

Related

[Q] Galaxy S not starting after boot animation

I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
themate1987 said:
i will not look for the problem cause ... if you have cwm check if lagfix is disabled and flash new rom via "install zip file" in cwm ... don't worry your phone is fine
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
At present condition, I have no CWM. I have only recovery 3e. Is it possible to flash CVM rhrough Odin?
If you can flash voodoo kernel, that has CMW inbuilt? Then try and figure it out from there?
I solved the problem by doing the following steps:
1. followed this link http://forum.xda-developers.com/showthread.php?t=807784 and flashed XWJM8 whatever that may mean.
2. Voila after flashing the above with odin my phone restarted with familiar UI.
3. Suddenly I noticed that my phone does not have an IMEI and my sim card not detected. I was tempted to copy my backed up EFS folder and I resisted the temptation. Instead I copied the CWM and Doc's rom which I was using prevously to the External SD and afterwards copied the same to Internal SD.
4. I started my phone in recovery mode and i could see that still the error message was there. But I flashed CWM and again flashed Doc's Rom. After the phone restarted, I found that my sim was detected and everything was back to normal. OMG what a relief it was.
5. Thanks to XDA and it's members for helping me.
if u have root acess (and i hope yes)
u have to restore system, turn off and than turn on pressing home and volume up, 3 bottons in same time, than with volume keys and home choose BACKUP AND RESTORE, than ADVANCED RESTORE and than SYSTEM, if u have maked a backup u have to chose that backup or one of them if u have more. let him restore and choose REBOOT PHONE. now u have phone again.
if u need some help email me [email protected]
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
seking said:
I have a peculiar problem.
I flashed a Doc Rom yesterday. After restarting the phone simply will not go past Black white samsung screen. I thought something might be wrong and flashed JPY firmware using odin. It was successful. But everything is fine except that the phone will not go past the Galaxy S boot animation screen. When I went to recovery mode it is showing an error message which goes something like this" cannot mount media. sd card requires preparation. go to the UI and format and boot options." I have got 3 button recovery as well as download mode. Is it possible to correct this error using ADB? Can somebody guide me. I am desperate as I love my phone very much.
Click to expand...
Click to collapse
Borrowing the tread. I was using CM9 and installed NStools and after a while my phone rebooted and started then froze at my homescreen. I went in to recovery and did a factory reset and the phone worked again. So I tried installing NStools again and got bootloops so I did a factory reset again but now I get bootloops and I can't go in to recoverymode.
My question is can I just flash EZbase 4.0 (Gingerbread) and then flash CM9 directly from it?
Thanks.

Phone always boots to recovery mode

That's it!
This was what I did:
- Flash kernel (I've already tried different versions);
- Then it opens recovery mode (CWM or Devil, depending on the flash I did before)
- I install the rom from the "install zip from sdcard";
- After the installation, it says "Installation complete" but it wont restart automatically.
- I do "Rebbot system now" or "Power off";
- When rebooting or powering on the system, it opens the recovery mode again and doesn't boot the rom.
Any idea on how to solve this?
Many thanks in advance.
Flash a stock room with Odin/Heimdall.
What's your current rom and what rom are you trying to flash? It could be that you have the wrong bootloader.
Sent from my SGH-I897 using XDA
same problem
Guys I have the exact same problem. Flashed 3 different kernels (hardcore-speedmod, CM9-galaxysmtd-Glitch-V14-B5 and Semaphore) so far with the same result. I install a desired ROM (CM10, SlimBean) and it says it is installed successfully.Whether I do "Rebbot system now" or "Power off", it always boots back into recovery, never tries to load Android. I've already formated and wiped everything on this phone and tried several times from scratch. Any idea why it does not even try to load android although it installs successfully? What should I try next?
When it reboots into the Recovery just install ur Rom again.
Sent from my SGH-I897 using xda premium
silverchairbg said:
Guys I have the exact same problem. Flashed 3 different kernels (hardcore-speedmod, CM9-galaxysmtd-Glitch-V14-B5 and Semaphore) so far with the same result. I install a desired ROM (CM10, SlimBean) and it says it is installed successfully.Whether I do "Rebbot system now" or "Power off", it always boots back into recovery, never tries to load Android. I've already formated and wiped everything on this phone and tried several times from scratch. Any idea why it does not even try to load android although it installs successfully? What should I try next?
Click to expand...
Click to collapse
Issue fixed - the problem was with the bootloader. Once I flashed an original firmware from Samsung, I was then able to install CWM and any ROM I wish after that. Not sure what caused the problem, but this was the solution in my case. Thanks to everyone who pointed me in the right direction!!!

Fussy GT-S5830

Hello all. I'm having trouble with a galaxy ace, in that it seems very fussy about which ROMs it will run. Bought it about 6mo ago from Optus Australia on prepaid and unlocked it to use on another network. I tried at the time to upload a custom ROM, but failed and ended up having to re-load it with Odin 4.38 and the only images I could then find, which are these:
APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
CODE_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
CSC_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
MODEM_S5830XXKPH_CL260130_REV03.tar.md5
Just recently the device has been unstable so I looked around and found the stable CM 7.2 ROM recently released (cm-7.2.0-cooper.zip) so I grabbed that, installed CWM 5.0.2.6, ran a backup and tried to install it. Device only got as far as the black boot screen with the word Android in uppercase doublespaced and hung.
Booted back into CWM and tried to restore, got the MD5 checksum error. Fixed the nandroid.md5 and tried again, and the device then hung at the initial boot screen for the stock rom (says Samsing Galaxy Ace GT-S5830 or similar).
Back to Odin. Found a recent version (4.42) and a one package ROM, S5830XWKT7_S5830OPPKS6_S5830XWKT3_HOME.tar.md5 and loaded this to the handset. This one gives me an Optus spashscreen followed by the sort of pulsing SAMSUNG text in an infinite loop.
Eventually tried the flasher and ROM I used six months ago (at the top of the thread) and was able to get the phone to boot successfully. Reinstalled the rooting package, reinstalled CWM5 and managed to restore just data out of the advanced backup/restore menu.
So I'm back to where I started, only six hours worse off Has anyone got any idea why this isn't working for me, or any good suggestions of how to proceed?
Cheers,
Alex
Are you sure you are using the GT-S5830 and not the Gt-S5830i ?
This was sent from a Galaxy Ace.
damn, that would be a stupid mistake
No, I'm not absolutely positive. The sticker under the battery says GT-S5830, but from a look at google images the two handsets appear identical? How can I establish for sure?
4lex said:
damn, that would be a stupid mistake
No, I'm not absolutely positive. The sticker under the battery says GT-S5830, but from a look at google images the two handsets appear identical? How can I establish for sure?
Click to expand...
Click to collapse
Alright , then that's weird.....what are your key combinations for DL Mode ?
This was sent from a Galaxy Ace.
Vol- & home ?
4lex said:
Vol- & home ?
Click to expand...
Click to collapse
Alright , I hereby conclude you have a problematic device and that I can't find services
"As a friend, just....put an end to me" - Ventus
Did u wiped data after the flash?
Sent from my brain using my GT-S5830
Marco Chung said:
Did u wiped data after the flash?
Sent from my brain using my GT-S5830
Click to expand...
Click to collapse
His system is still in ext4 file system he has to wipe data after the flash! You will no longer stuck in bootloop!
Oh god why
I forgot stock = RFS
"As a friend, just....put an end to me." - Ventus
thanks. How can I find out more about this file system issue? is there an app that will tell me how it's currently configured?
4lex said:
thanks. How can I find out more about this file system issue? is there an app that will tell me how it's currently configured?
Click to expand...
Click to collapse
Unfortunately , no.....
"As a friend, just....put an end to me." - Ventus
Use Odin 4.38, download any one package firmware from sammobile with your backup's android version (ie 2.3.4, 2.3.5 or whatever).
Flash it, wipe everything after Flash (from stock recovery), then root, install cwm and restore your backup.
Boot loops are mostly caused when you don't wipe after flashing. Connection issues can be fixed by flashing your region's modem.
Also, restore backups using the appropiate cwm version (backups of cwm5 restore with cwm5)
Cheers. Dunno if I'm being a bit simple here, but I'm only finding 10 most recent FWs here, all of which are 2.3.6 ?
I didn't do as much wiping as you suggest last time though, so i'll give it another whirl and see if I do any better.
I was being simple. Hadn't selected a region.
trying now.
Flash DXKPB 2.3.4 Asian firmware first. If you flash that, it will format all of your partition back to rfs
And after that you can just flash newer firmware like XWKT7 2.3.6 and wipe data. Voila!
Sent from my GT-S5830 using Tapatalk 2
i had stock 2.3.6 and i decided to download and flash Jellaxy
it works, but sometimes its slow, lagging and apps crashing
i have nandroids of both (stock and jellaxy)
i tried restoring stock 2.3.6
error restoring /system
advanced restore just system didnt work, too
i flashed 2.3.5 italian through odin (download mode)
odin didnt finish because of bootloop
i dont remember exactly, but i did wipe, factory reset, cache and/or other
it booted, finally (in italian)
then i formatted /data and recovered old data
bootloop
i tried wiping all at once: dalvik, cache, data, factory reset
bootloop
now i cant go to download / recovery by holding vol down/up and home and power, it goes to ramdump
recovery is now home + power
i can restore jellaxy, but not stock
what to do? i'm stuck on jellaxy
trogper said:
i had stock 2.3.6 and i decided to download and flash Jellaxy
it works, but sometimes its slow, lagging and apps crashing
i have nandroids of both (stock and jellaxy)
i tried restoring stock 2.3.6
error restoring /system
advanced restore just system didnt work, too
i flashed 2.3.5 italian through odin (download mode)
odin didnt finish because of bootloop
i dont remember exactly, but i did wipe, factory reset, cache and/or other
it booted, finally (in italian)
then i formatted /data and recovered old data
bootloop
i tried wiping all at once: dalvik, cache, data, factory reset
bootloop
now i cant go to download / recovery by holding vol down/up and home and power, it goes to ramdump
recovery is now home + power
i can restore jellaxy, but not stock
what to do? i'm stuck on jellaxy
Click to expand...
Click to collapse
To restore a stock rom your file systen to rfs !!!
And all custum rom are ext4!!
Meaning ... Use stock recovery to wipe data causing the system to become rfs again then install cwm and ONLY !!! Restore ! Otherwise if u format it will convert to ext4 again !
U can also use chainfire ext4 app to change file system in jellaxy and then restore.
Take care
Sent from my GT-S5830 using xda premium
SnowPluralism said:
To restore a stock rom your file systen to rfs !!!
And all custum rom are ext4!!
Meaning ... Use stock recovery to wipe data causing the system to become rfs again then install cwm and ONLY !!! Restore ! Otherwise if u format it will convert to ext4 again !
U can also use chainfire ext4 app to change file system in jellaxy and then restore.
Take care
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
what about that ramdump?
can i use mobile odin?

[SOLVED] Am I bricked? PLEASE help me :(

Hi guys. I'm quite a noob, but have a good experience on flashing without be bricked (CM9, CM10, Crash, Paranoid...), but I have a problem.
I will explain to you step-by-step what I've done with my Note, so I wish some of you could help me.
1) I was running JB Crash ROM with PhilZ kernel.
2) Some apps got Force Close too often, so I went on Rom Manager and, after a look into the "Fix permissions" description ("It will fix some force closes" or something like that), I decided to give it a try and I tapped on it.
3) After that, my homescreen became unusable, because "TouchWiz Home" got EVERY TIME force closed without reason. Everything else worked fine, so I deciced to boot into CWM recovery to restore a nandroid backup of the same ROM.
4) Instead of tapping "restore", I tapped "backup" (my fault) and it started without possibility of get back. I got something like 200 Mb of free space, so in every case it will never have had success. My Note stucked at this point, so I decided to reboot manually (vol up+home+power) into recovery. Finally I tried to "restore" but I get this message: "ERROR WHILE RESTORING /SYSTEM".
5) I tried to reboot my Note, but it stucks at "Samsung Galaxy Note GT-N7000" screen without going on.
The good news is that it can go without problems into recovery and into download mode. What can I do? Flashing from CWM, for example, CM9 can fix this?
Please help me thanks!
1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....
friedje said:
1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....
Click to expand...
Click to collapse
After formatting /system, can I try to restore my nandroid backup? Or I have to necessary reflash my ROM? In that case, it's the same thing make it via CWM or via ODIN PC? I'm still on PhilZ recovery, which is safe I guess!
Anyway, thanks for your help
Via CWM or Odin, depends if you have your rom in the zip or the md5.tar format.
I would reflash to be clean. It's a bit more work in restoring your apps and data
afterwards, but at least you don't restore any messed up files.
if you can still access CMW and Download Mode then you probably are not brick... try fresh install through pc odin.. safe method no need to worry about bricking by fullwiping on unsafe kernel or raising triagle or binary counter whatsoever.. if you wanna play safe then PC ODIN and after that you can root your rom
Thank you guys, now I'm on stock ICS flashed via PC Odin and everything works fine I knew I was 99% not-bricked (still recovery and download mode avaiable), but I was a little scared too.
Thank you again!
glad you solved it.. :good:

Ace bootlooping with all cyanogenmod roms

I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
gb2793 said:
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
Click to expand...
Click to collapse
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
SuperAce609 said:
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
Click to expand...
Click to collapse
I tried this after discovering the sim "problem" but it didn't work out.
bhumit22 said:
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
gb2793 said:
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
Click to expand...
Click to collapse
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
bhumit22 said:
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
gb2793 said:
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
Click to expand...
Click to collapse
Did you mount the /system? Sometimes you have to do this.
Boot into CWM, mounts and storage > mount /system
Check to see that everything is mounted, sd-ext may or may not work, don't worry about it, it's a big in most CM9 ROMs

Categories

Resources