Repetitive restart on tab /ROM manager - Galaxy Tab Q&A, Help & Troubleshooting

Hi
I have installed the licensed ROM manager on my samsung P7300 tab 8.9 and flashed the CWM recovery.
When i entered into the back up current ROM the system started to restart endless. Now when it reachs the samsung galaxy tab 8.9 screen,it blink and applies another resyart. I guess it it not able to enter the recovery mode
How can I recover my tab now?? Please helppp
Sent from my Nexus One using XDA App

I have the same thing, i can only think of flashing the default rom to it again. but i can't find it online anywhere!

Hi
Get your ROM from www.sammobile.com (if I remember correctly) it was www.samfirmwares.com and then flash it using Odin.
I found some guidelines on xda and my GT is live again
Sent from my Nexus One using XDA App

Related

[Q] Will not go past samsung screen, Galaxy tab I/O 10.1

Please help!
I was working on rooting my tab, it looked so easy, and used adb to push the file and adb reboot restore. It just went to boot normally but now it endlessly shows the Samsung animations. I never got to select from the SD card or anything. Now what can I do?
This is the galaxy tab 7" fourm, try asking in the 10.1" one. As for your issue a reflash via odin may work at your own risk (not sure if the limated tab is supported)
Sent from my GT-P1000 using XDA App

[Q] Help: Flashed the bootloader of my Samsung Galaxy Tab P1000 with the wrong binary

I have a Samsung Galaxy Tab GT-P1000. Using Odin3 v3.04 I (accidently) flashed the Bootloader with the wrong binary. With the Auto-Reboot option selected on the Odin3, the device turned off and is not turning on again.
Before flashing, my Tab had the official Samsung GB 2.3.3 (P1000JPJPC if I am not mistaken).
Some threads suggest that I charge the Tab using the wall charger for 4 hours, and see if the battery icon appears on the screen or not, then connect the tab to the PC. I did that. I connected the Tab to the wall charger overnight. Nothing appeared on the screen. Then the next morning I connected the Tab to the PC, nothing happened. The PC does not recognize that there is anything connected on its USB port.
The Tab is not turning on. I've tried to press (and long press) almost every combination of the Tab's keys I could think of, but the Tab just won't turn on.
I guess I hardbricked my device (as explained in this thread)
I don't think I'll be able to apply the Unbrickable process explained here.
Having said that, my question is: Is there anything else I can do at home to revive my Tab, or do I need to send it to Samsung repair center?
-Adel
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
You can also send it to mobiletechvideos.com.
priyana said:
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
komplotter said:
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
Click to expand...
Click to collapse
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. Yes, as far I could tell from reading up on it, I would guess mine is not bricked.
I can boot to download mode and to recovery - cwm (v3.0.0.5). I have tried downloading Overcome and anything else I thought might work but this is where I get stuck. I've wiped the cache and other things like that described on the net and on videos (actually this is what got me into this in the first place). When I copy a .zip file onto the external sd card and put it in the tab, I can't install the zip from the sd card because it can't find the directory I made. I'll have a look in your signature and see what I can find there but any guidance would be much appreciated.
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
priyana said:
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I managed to get CWM 5.5.0.4 and get ICS installed in my tab by using two files (CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS and P1000XXJQ1_P1000XXJQ1_P1000XXJPZ). I would still like to use Overcome and I have had a brief look at the installation guide. I'll have a more thorough look and then give it a shot. I see that there is a version 4.1.0. Would I use that in that same way as the 4.0.0 ROM, because the Overcome7_ROMv4_Wipe file won't extract (there seems to be a problem with it and I've downloaded it twice).
You don't need the overcome ROM.
Just GB stock safe and overcome kernel.
Sent from my GT-P1000 using xda app-developers app

[Q] Galaxy Tab P1000 no reboot

Hi
I need help, if some one could help me was very good.
I upgrade my Galaxy Tab P1000 to Android 4.1.1 via Jelly Bean Sapir ROM (CM10-based) follow the procedure in this link
How to upgrade the Galaxy Tab P1000 to Android 4.1.1 Jelly Bean
Everything went perfectly until the end.
After the reboot re-enter recovery mode, I was doing a little research and found someone who says the tab came in recovery again to install the google app.
Okay I installed the gapps. He returned to boot into recovery, after tried it out of recovery mode but could not.
I opted to try again and get back behind the previously created backup. From then on the tab starts the past 2/2 blocks and only appears on screen Galaxy tab and bottom samsung.
Someone can help me?
Friends I am not well understood in this matter if I have said or done something stupid peoblemas not have to tell me learn and not just because I repeat.
From already thank you
When you first install CM10, you need to flash it multiple times, could be up to 4 times.
The first few just upgrades your cwm/kernel and converts to mtd, etc.
The last one will take the longest, you will see messages about flashing system etc etc.
Only then you flash gapps after the last long flash.
Sent from my GT-I9300 using xda app-developers app
priyana said:
When you first install CM10, you need to flash it multiple times, could be up to 4 times.
The first few just upgrades your cwm/kernel and converts to mtd, etc.
The last one will take the longest, you will see messages about flashing system etc etc.
Only then you flash gapps after the last long flash.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Do you now how can I recover my tablet?
League is not as if there was software.
is dead.
Can you go to download mode?
If so follow overcome links in my signature.
Sent from my GT-P1000 using xda app-developers app
No, the battery died and I went by charging past few hours I went to see if it was loaded and the stack that appears on the screen remained blank but the tablet was light on the buttons ...
No power, no turn off, the tablet is frozen on the screen with the battery.
But even when he entered the recovery mode would not let me access the memory card ...
If you are talking about stock recovery (3e) then don't even bother to look into that.
For now just concentrate on charging the device and boot to download mode.
Sent from my GT-P1000 using xda app-developers app
Strange thing is that I could get into download mode but after finishing the battery has not let me in ...
I cant do power on
Do you think I gone need riffbox?
I want to acknowledge the help they gave me, after several attempts managed to get into Download mode and follow the procedure that has provided me, "http://forum.xda-developers.com/show....php?t=1881981" resolving the problem.
Thank you ...
Now I have another probelama, put the rom Android 4.1.1 ROM Jelly Bean by Sapir (CM10-based) and I can not make calls or put Widgets.
You know tell me which is the best rom for Galaxy tab GT-P1000?
And also wanted for my HTC Tattoo with the best room possible, have any idea?
I have the mobile phone 1 year and is still with Android 1.6

Galaxy Tab P1000 stuck on Samsung logo

I have a Samsung Galaxy Tab GT-P1000 3G + WiFi that I manually upgraded from Froyo 2.2 to Gingerbread 2.3.6 with the files from the sammobile site and Odin. Everything went well, but when I try to startup the device, it stays stuck on the flashing Samsung logo. After a while the logo dissapears for less than a second only to popup right back. Deleting the cache in the recovery menu didn't work. What should I do?
Restock again.
This time use overcome method. Follow my signature.
Sent from my GT-N7100 using xda app-developers app

Odin/Keis Stock Flash Failure

Attempted to flash my OG Galaxy Tab 10.1 back to stock and it failed half way through Odin.
When booted up, screen displayed message "Recovery failed Update through Keis. Keis doesn't seem to recognize device.
Help. Ideas?
Sent from my Nexus 4 using Tapatalk 4
You should not be posting question in dev forum, moreover in a galaxy tab 7" one.
Go to your own forum and in the right sub forum.
Sent from my GT-P1000 using xda app-developers app
Was it crashing or hanging?
I recently tried to restock and it hung on "hidden.rfs". In the end I first flashed GB_Stock_Safe_v5 and this worked (at which point I suspect you would be able to then flash your OEM/Offical firmware without issue)?

Categories

Resources