Database Develop

Updated [16/11]: [App] [G-Sensor] [Brand New] The XSense v1.0

Credits:
Foremost, let us all acknowledge Koushik for his brilliant "Sensors" library upon which most if not all non-HTC apps that use the G-Sensor, Light-Sensor, and Navi-Sensor are built, simply ingenious. Moreover, I would like to recognize No2chem for the NeuLed2 library which is an equally exquisite peace of code that allows access to the Diamond/Pro Leds. Without those two guys, accessing these advance interfaces on the diamond/pro would be inapproachable at best.
Reason: Since I bought my Diamond, I constantly thought HTC gave it a lot of sensors but nearly no .."Sense".
......... X-Sense ...........
* Hopefully, an innovaton & integration of RANDOM but needful features...
Features:
1. Courtesy Settings:
- Select Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down (duh!).
- Automatically activate/deactivate the Speakerphone during phone calls depending on the phone's posture. In other words, if you're not holding the phone up then it will automatically activate the Speakerphone.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it at customizable intervals: Missed Call(s), Voice Mail, and SMS only.
3. Stylus-Sense:- When the Stylus is in/out: Will play faint sound + Blink the Back button's light +/Vibrate. Moreover, the device will vibrate whenever you move it at customizable intervals.
- When the Stylus is out and the device is moved: Device will vibrate twice on every posture change + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes ON until the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this.
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: Your phone will suspend if you hold it up-side-down (duh!)
- Light Navi Button When Suspended: Will do just that. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
6. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
Logic:
- During phone calls, All features are suspended except the Speakerphone-specific code.
- Program will respond to posture changes only 2 seconds after they have occured, this is to
avoid unintended operation ( as much as possible ).
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and enjoy the merits of your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
Requirements:
.NET 3.5 + Diamond or Raphael.
Restrictions:
Only for the Diamond/Raphael (vis-a-vis, it will crash on any other device!)
Bugs/Limitations:
Knock yourself out...
Disclaimer:
This program is provided strictly on "as is" basis. It is intended only as a proof-of-concept. Although fully functional, it must NOT be considered for daily use. This software is very likely to compromise the integrity of your data as well as invariabley cause your device to malfunction in any way, shape, or form. Therefore, the developer shall be absolved of all responsibility towards testers and/or their computers & devices. While using this software you agree to be solely liable for all and any damages you do to yourself, your device, or any damn thing you possess and care for!
Release Notes:
- Download & Install the CAB
- Run the XSense from your Start Menu\Programs, customize to taste, and enjoy!
- IF you want it, download it from the Diamond section.
NOTE: Further releases/upgrades will NOT work on the Raphael/Diamond PRO.

wheres the cab?

Cab?!?
This program sounds sweet.. Im willing to give it a go, but no cab.

This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed

klasital said:
This is like the april fool joke for the wireless charging app. It's a joke, the app is too good to be true
/Closed
Click to expand...
Click to collapse
I fell for that too man, it was NOT funny tho! Its October btw..

shirreer said:
I fell for that too man, it was NOT funny tho! Its October btw..
Click to expand...
Click to collapse
And you still haven't posted the app...
Roger

96cobra said:
And you still haven't posted the app...
Roger
Click to expand...
Click to collapse
Released: On first post.

Release: available on the first post. Tell me what you all think (compliments/complaints)...

shirreer said:
Release: available on the first post. Tell me what you all think (compliments/complaints)...
Click to expand...
Click to collapse
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice

Nice but . . .
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?

XERO_Racer said:
can i have your permission to review this app on a video? i have a youtube dedicated to the FUZE but also other stuff
looks promising and nice
Click to expand...
Click to collapse
Go right on man, and thanks for the "cheer up". Enjoy

jewill00 said:
OK first off I love this program it works very smoothly, except for one thing, and I am sure this is a simple fix. I unzipped and copied everything to the root folder of my device. Started the application and it starts working, very cleanly I might ad. However the stylus function isn't working for me. I am sure it just has to do with the file of the wav, should I put these in any specific folder?
Click to expand...
Click to collapse
Tell me more:
- Did the stylus-out/in sound EVER play?
- Did you change the original wav files?
- Is the phone's system volume (not the Ringer) loud enough to be heard?
Notes:
- The wav files (in.wav and out.wav) are supposed to be in the same directory as the program.
- The original wav files are subtle, they are meant to merely "hint" at you.

Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.

bedobela said:
Glad that this app really works. Maybe in the next release you could add some settings so we can customize it as we wish. The only small problem that I encountered is that the phone doesn't turn back to loud mode when I flip it unless I push the wake button to turn the screen on. This can be annoying sometimes because I missed a call this way...
Good job on this app. It's really subtle but useful at the same time.
Click to expand...
Click to collapse
Thank you mate. I intend to create a settings screen altough that would be both cumbersome and useless for the current feature-set except for the stylus sounds.
I am thinking of adding a launcher to the stylus events, perhaps a new note would open on stylus-out, then save+close on stylus-in.. who knows, eh?
As for the missed call......LOL... I think that's just the point ...Seriously though, WM devices cannot survive the battery strain if they don't sleep (suspend). So, we do with what we got
Cheers

only issue i am having is.. I would prefer not to have the navi lights on all the time... whether the phone is face up or down my navi lights are always on

Short Review
ok soo far i tested the app and i have to say is this is a real good app, only problems im encountering is the vibration is very very faint, but i guess thats ur deal of conserve battery life? theres no problem to it and besides...speaking of battery life, leaving the NavLight on and messing around with the app for 5 mins straight didnt even take a percent off of my battery, ill try for a more deeper battery challenge but anyways, heres a list of suggestions, pros and cons, btw this app makes my TouchPro look 5000 times more cooler too something ive been wanting on this phone
PROS:
-Courtesy Sense seems to be very effective
-doesnt kill my battery much(yet)
-not a CPU Heavy app, still can run TP flawless
-Stylus Sense is responsive
-not a memory heavy app
CONS:
-Response of every "sense" is very slow, takes like 2 seconds to switch
-Courtesy Sense can sometimes be out of control, can possibly switch the volume off and on since i have my TP in my vertical case(but that can be fixable i guess)
-Cant close the app(if user decides to) but theres a way to close it through task manager(not HTC TM though)
-Backlights dont light up anymore if app is in use
-Cant unmute unless you switch the device on
Suggestions:
-Make a settings menu where u can adjust the poll speed and sensitivity and what Senses you can turn Off or On
-Should make the Stylus notification light blink every 15-30 seconds or 1 min at the most
-Also to add on the Notifications Sense is the famous blinking LED Light whenever you shake the device
-Close/Exit option onto the app
-When the device's volume is set on silent or vibrate, the Common Sense should be turned off until the device volume is set back to normal
-and probably something crazy, the Party Light Mode, where you can make the lights blink with noise or fade different paterns or blink with some random pattern just for FUN lol
Overall Score 9/10 and thats my honest opinion...this is a great app especially in Alpha stage
Video Review coming up this weekend, ill be posting a link soon, thnx for the great app

Video Review
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY

XERO_Racer said:
here ya go everyone, a review video courtesy of me feel free to subscribe if you like
http://www.youtube.com/watch?v=Ds2Brq8L_dY
Click to expand...
Click to collapse
Bro, let me thank you for a VERY groovy flick, I enjoyed every bit of both your written and video reviews.
I must praise you further for a great job at a thorough & constructive critique. Your stylish review and suggestions are valuable and are noted with all due enthusiasm. I will try my utmost to reflect what I can on my next attempt - the Beta. Also, I will contemplate creating this "feast of lights" you're craving as a token of gratitude for your effort
Cheers

Here's v1.0 ... fully customizable.

This seems to be unneeded around here, So... for the few who want it, y'all can download it from the Diamond Section - In the meantime, I'll be contemplating ways of making new versions unusable on the Raphael for the obvious unpopularity of this device, and equally evident lack of enthusiasm from those who have it
Cheers

Browser Screen brightness is not maxed (browser locked-setting)

I'm not sure if this has been brought up before, but I wouldn't be surprised if it was missed. I am the type of user who likes to use the phone at full brightness, as it does not seem to have a huge negative impact on my battery life in day to day operations.
I was looking carefully at the browser on the Galaxy and wondered why the whites looked so dimmed in comparison to other parts of the operating system.
I had already done the following:
1. Turned the OS brightness all the way up.
2. Turned browser brightness all the way up.
3. Disabled the screen power saving mode.
I then downloaded a flashlight application and maxed it to 100% while switching to the browser with the Home key multitask, and going back and forward between the flashlight app and the browser app, it is very clear that the browser is not pushing max brightness. Even though the brightness settings on both the OS and the browser are maxed, it seems as though the browser is capped to 80% brightness or so.
My friend also verified this during his test run, as he has just bought the Samsung Vibrant and noticed the same thing. I understand many will just leave the auto-brightness setting on, but that's not really addressing the issue here.
Is there a way for an XDA developer to correct this issue through a patch or ROM?
thanks

I checked with the shell and when brightness is at 100% it has an absolute value of 255, the same when I'm at the browser set with full brightness, so it seems it's working as it should.
You can check it with this command
Code:
cat /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/blacklight/s5p_bl/actual_brightness

darksnarfer said:
I checked with the shell and when brightness is at 100% it has an absolute value of 255, the same when I'm at the browser set with full brightness, so it seems it's working as it should.
You can check it with this command
Code:
cat /sys/devices/platform/s3cfb/spi_gpio.3/spi3.0/blacklight/s5p_bl/actual_brightness
Click to expand...
Click to collapse
I don't know, I experience the same thing as the OP. Everything's bright, except when surfing the web.

Same issue here. I use Opera in bright daylight.
Sent from my GT-I9000 using XDA App

If you go in to the brightness settings there is an option at the very bottom called "Power saving mode". I'm not sure if that is having any effect on the browser.

Thanks for the numbers, but I gotta say, just comparing the flashlight app and hitting the back arrow to toggle to the browser, it is beyond obvious that the browser is not as bright as the flashlight application. I used google with it's white background and zoomed in to an area that was just white to avoid other distractions.
This is the best way to test since there will be no transition in between the application toggle and you see the screen dim easily.
As indicated by my original post, I have also turned off the power saving feature so that is not a concern. Someone did say that the Behold 2 has the same cap for their browser and that this is a samsung specific setting that's probably there to save battery. I haven't been able to confirm it on that phone yet but just give the flashlight test a chance and you'll see.
oh one last thing i noticed is, when going from the browser back to the flashlight, sometimes the flashlight app is also dimmed at the same level brightness as the browser, but tapping the screen 'wakes' up the app into full brightness.

TGalaxy browser brightness
To me it's very obvious that the browser is dimmed down, I'd say more than to 80%... Having google as the default homepage couldn't make it more obvious when opening the browser! Samsung obviously thought that no one with a decent eyesight will buy their phone. Or anyone who feels capable of managing their phone's battery life themselves.
It's just one of those niggling things that had to be included, lessening the experience of an otherwise rather breathtaking phone. Another one is the compulsory vibration when charging is finished - makes me wonder when others, or the developers for that matter, charge their smartphones! I charge them overnight, and of course every night... or at least used to, as with the Galaxy S, I can no longer sleep.
I think I've been through every menu possible to change these couple of features, with no success... if anyone knows anything, please share.

It happens on the dim-side, too
I have the same problem, but on the dim side. The browser brightens the screen when it comes on if you have the brightness set to zero. I like it dimmed all the way at night if I'm reading in bed when the lights are out and my partner is asleep, but it keeps turning it up so it's pretty bright in the pitch dark. Arrgh. It's my phone, can't I set it the way I want? Grr.
I've read that there are limitations on how much the screen dims and brightens unless you have a rooted phone and you use an app that's not built into the OS.
I rooted mine and there are some configuration apps that will set it to 0, but I think the built-in operating system slider doesn't go all the way to zero and might not go all the way to 255 when you slide it to the very edges. Supposedly it only goes to 10 on the low side from the notes on some apps.
So, probably it's a similar limitation on the slider for the screen brightness in the browser. We're probably stuck with this problem until someone writes an app that lets you change this setting to any value between 0 and 255 since the default sliders don't allow the low side and I'm guessing not the high side either.
So . . . any android developers out there, it would be cool if you could make an app to change this setting if it's available programatically somewhere.

I tried the "Dimmer" and "Brightness!" apps from the market. But none of them 'Keep' the brightness at the minimum always.

[Android] Total Screen Control (updated on 12 April)

I would like to take the opportunity given by XDA forum and share with you my application, named "Total Screen Control".
I would be more than happy if I will receive through this thread opinions, features requests, bug fixes requests, new ideas, anything that could improve the application.
Thanks !
Total Screen Control
Total Screen Control is an application for setting the Brightness Level, Screen Filter, ScreenOn Lock and Rotation Lock preferences individually for any application installed on your phone.
Allows you to apply a filter that dims the brightness below minimum value so your eyes don't hurt during night viewing. Very useful in low light conditions especially on AMOLED screens where even the lowest brightness value is still bright. Also can save a lot of battery combined with ScreenOn Lock based on phone orientation!
More features:
- Screen Filter/Privacy with schedule and brightness slider for fine control !
- Dynamic Screen Filter based on phone's light sensor! Forget about classic auto-brightness, switch to Dynamic Screen Filter!
- Screen Filter Bar for easy and cool control of Filter dim
- ScreenOn Lock based on phone orientation! Keeps the screen on as long as you use your phone! SAVE BATTERY also!
- ScreenOn Lock, Brightness level and Rotation Lock individually for any app
- Option to disable softkey backlight (not working on all phones)
- Tasker/Locale plugins !
- Notification icon on Status bar with all needed information
- Up to 5 configurable Screen Filter Presets
- 3 Widgets for easy access
- Configurable preferences, alerts
- Start at boot
Does your eyes hurt you when reading or playing before bedtime ? Enable the Screen Filter
Tired to get the screen off while reading your eBook, browsing on Web or playing? Setup the ScreenOn Lock
Want to set the brightness or rotation individually? Configure them with Total Screen Control
For all these this application is for you!
Changes log:
12/04/2012 - Ver 2.4.2
- Added option to manually input a value for Light sensor when using Dynamic Screen Filter
- Increased the list for dynamic levels to 10 items (from 5)
10/04/2012 - Ver 2.4.1
- added option for changing text color in notification status bar
- few bug fixes
26/02/2012 - Ver 2.4
- Tasker/Locale plugin for ScreenOn Lock event !
22/02/2012 - Ver 2.3
- Tasker/Locale plugin for Screen Filter settings !
- "Install button fix" option. Enable it only if you can't press Install button when installing an aplication.
- To come: Tasker/Locale plugin for other Total Screen Control features (eg ScreenOn Lock)
28/01/2012 - Ver 2.1
- Enhanced Softkeys backlight module. Turn off softkeys when screen filter value reach a configurable preset value
- New Softkeys off detection method (Root devices)
- Fixed first detection method,now it will work on supported devices. If not,select another method or contact me.
19/01/2012 - Ver 2.0
- Added NEW FEATURE: Screen Filter Bar - Control Filter dim with a swipe of you finger in any application you're in!
If you like this feature check Total Screen Filter which allows more customizations !
Check video for demo of this new feature
- Redesign of the application interface
- ICS compatible
- Various code enhancements
02/12/2011 - Ver 1.9.3
-Redesigned Screen Filter Schedule to be more intuitive
-Better performance when using Dynamic Filter
-Fix bug in Screen Filter Presets
11/10/2011 - Ver 1.9.2
Added option to delay Screen Off after the ScreenOn Lock is released.
07/07/2011 - Ver 1.9.1
Added option to select the interval Total Screen Control checks what application is visible and apply configured options.
Useful for those who want a better response time in changing the configuration but also for those who don't use settings per individual application by increasing the checking interval and by this achieving a lower battery usage.
26/06/2011 - Ver 1.9
*** New feature ***
- Option to disable softkey backlight when Screen Filter is enabled (not working on all phones)
Changes:
- Removed brightness popup window when brightness is changed
18/06/2011 - Ver 1.8
*** New feature ***
Screen Filter Color - allows you to change the color of the Screen Filter !
20/05/2011 - Ver 1.7
New feature !!
*** Dynamic Screen Filter ***
With this option you can configure Screen Filter levels based on phone's light sensor! Assign for every light sensor value a value for the Screen Filter !
Forget about the inexact auto-brightness option of your phone and enable Dynamic Screen Filter for better control of your phone's brightness!
28/02/2011 - Ver 1.6
New feature:
"Bright Light Detection", automatically disable Screen Filter based on Light Sensor readings when bright light is detected.
Useful when Screen Filter is enabled and the phone is used under direct sun, this feature will temporally disable the Screen Filter if the light threshold is passed.
14/02/2011 - Ver 1.5.1
Fixed Android 1.6 compatibility
07/02/2011 - Ver 1.5
Added option to disable Global Screen Filter for certain applications (e.g. you want Global Filter enabled but for Video Player or Messaging you want it disabled).
Just go in Application Tab/Brightness Icon and configure this feature for what application you want!
29/01/2011 - Ver 1.4.2
Added No Movement Detection in ScreenOn Lock based on phone orientation feature. Allows to set the time after that the ScreenOn Lock will disable if the phone was not moved.
Various enhancements in phone orientation detection algorithm.
Download: trial version valid until 06.02.2012

you might wanna say if its for android or winmo in the thread title

Kameirus said:
you might wanna say if its for android or winmo in the thread title
Click to expand...
Click to collapse
Thanks, I have only Android in my head, I didn't realize that it could be also for other platforms

Yeah, quite surprised that XDA hasnt created sub-forums for the different OS's aswell as mandatory topic titling.
Very nice idea though and thaks for posting info on your app bud

Really a good app , it could help me use lowest brightness value to save my battery.
But what i got a highly battery usaege on this app..... too bad~~~ Could some one tell me what's going on ?
My phone is idle , i even did not use it when i plug out the ac.
But ..

great app but it crashes everytime i try to change one of the settings :/

A great app, I like this.

Great app. working so far fine. No crashe....till now I can not confirm that battery problem.

serect said:
Really a good app , it could help me use lowest brightness value to save my battery.
But what i got a highly battery usaege on this app..... too bad~~~ Could some one tell me what's going on ?
My phone is idle , i even did not use it when i plug out the ac.
But ..
Click to expand...
Click to collapse
Ok I have got an equal result like you. 82% usage for the last 1h 20 min....Gonna keep it for a while on my device and watch its usage with the monitoring function of the app "SystemPanel".

Here is a screen shot of the usage

Hi guys,
thanks for your feedback:
Regarding battery use, this is something it needs deeper investigations, I have also encountered this high battery use REPORT but not always and I have gathered the following info:
- This is related only to ScreenOn Lock based on Sensor Orientation feature. So anyone that doesn't need this function just disable it and 99% that this usage will not appear anymore
- For the others, who find this feature useful there are 2 remarks:
1. First is a quote from another, much known application who's users reported also this high usage report:
* Battery usage is an insanely misleading stat. Many people assume that it means "80% of my battery was consumed by ****", and consequently, "if ***** were not running, my battery would last 80% longer". This simply isn't true. It's not even close. I've tried to get clear answers from Google on what the stat actually means, but haven't gotten more than "the amount of power consumed by an app when it is running". ***** doesn't run much.
* Some phones appear to get confused and attribute nearly all system battery usage to *****. This problem is not unique ******, and in fact applications such as Locale have started providing disclaimers for certain devices to warn users of the issues.
* ***** still suspends itself whenever the screen is turned off. The ***** service puts all threads into a sleep state using Thread.sleep(99999999999). It's possible that the Service is still being attributed some kind of resource usage since it hasn't been terminated (even though the threads have been suspended). I'm looking into this. At this point from what I can tell, there are no running threads once the screen is turned off...
I'm continuing to look into this, as I'm getting absolutely hammered at this point from a ratings (and consequently sales perspective), but I'm not sure that there is much I'm going to be able to do about improving the battery usage stats on specific devices.
The bottom line is this: ***** either improves your phone's battery life or it doesn't, regardless of what the battery stats say. On my Nexus One, ***** averages around 2-3% on the stats list. Sometimes it goes higher, but will generally drift back down to around that level.
2. This occurs randomly, please try to reboot your phone and check if the usage is still high.

DirkStorck said:
Ok I have got an equal result like you. 82% usage for the last 1h 20 min....Gonna keep it for a while on my device and watch its usage with the monitoring function of the app "SystemPanel".
Click to expand...
Click to collapse
I'm using also System Panel and there it could be clearly seen that Total CPU Time and Average Consumption for Total Screen are in limits.

reaperzero said:
great app but it crashes everytime i try to change one of the settings :/
Click to expand...
Click to collapse
Please provide more details, when it crash, what setting you try to modify, phone model, Android OS version...

muntos said:
Hi guys,
thanks for your feedback:
Regarding battery use, this is something it needs deeper investigations, I have also encountered this high battery use REPORT but not always and I have gathered the following info:
- This is related only to ScreenOn Lock based on Sensor Orientation feature. So anyone that doesn't need this function just disable it and 99% that this usage will not appear anymore
- For the others, who find this feature useful there are 2 remarks:
1. First is a quote from another, much known application who's users reported also this high usage report:
* Battery usage is an insanely misleading stat. Many people assume that it means "80% of my battery was consumed by ****", and consequently, "if ***** were not running, my battery would last 80% longer". This simply isn't true. It's not even close. I've tried to get clear answers from Google on what the stat actually means, but haven't gotten more than "the amount of power consumed by an app when it is running". ***** doesn't run much.
* Some phones appear to get confused and attribute nearly all system battery usage to *****. This problem is not unique ******, and in fact applications such as Locale have started providing disclaimers for certain devices to warn users of the issues.
* ***** still suspends itself whenever the screen is turned off. The ***** service puts all threads into a sleep state using Thread.sleep(99999999999). It's possible that the Service is still being attributed some kind of resource usage since it hasn't been terminated (even though the threads have been suspended). I'm looking into this. At this point from what I can tell, there are no running threads once the screen is turned off...
I'm continuing to look into this, as I'm getting absolutely hammered at this point from a ratings (and consequently sales perspective), but I'm not sure that there is much I'm going to be able to do about improving the battery usage stats on specific devices.
The bottom line is this: ***** either improves your phone's battery life or it doesn't, regardless of what the battery stats say. On my Nexus One, ***** averages around 2-3% on the stats list. Sometimes it goes higher, but will generally drift back down to around that level.
2. This occurs randomly, please try to reboot your phone and check if the usage is still high.
Click to expand...
Click to collapse
Thanks muntos. I like this app because the function on it equal to Screebl + Screen Filter .And I only need to use one app.
The "ScreenOn Lock" is same as Screebl. But i notice that when i use screebl it only have about 2~3% battery useage.
Hope you could find out the root cause about the heavily battery usage.
FYI , my phone is Galaxy S I9000.
BTW , How many days for trial version?

serect said:
Thanks muntos. I like this app because the function on it equal to Screebl + Screen Filter .And I only need to use one app.
The "ScreenOn Lock" is same as Screebl. But i notice that when i use screebl it only have about 2~3% battery useage.
Hope you could find out the root cause about the heavily battery usage.
FYI , my phone is Galaxy S I9000.
BTW , How many days for trial version?
Click to expand...
Click to collapse
My Phone it's also Galaxy S I9000. Please, could you do a phone reboot and then check if the same high values are shown in Battery use ?
Regarding trial version, as this moment you can check when the version expires by going to menu->about, but check in the Market when an update appears, this will extend the trial period.

muntos said:
My Phone it's also Galaxy S I9000. Please, could you do a phone reboot and then check if the same high values are shown in Battery use ?
Regarding trial version, as this moment you can check when the version expires by going to menu->about, but check in the Market when an update appears, this will extend the trial period.
Click to expand...
Click to collapse
yep~~ I had do a phone reboot. The picture which i posted before is a result after phone reboot.
Anyway , much appreciated your instant reply ,I will do a phone reboot again and observe if any change on battery usage.

Thanks Serect!
Anyone who uses this application please provide feedback regarding Battery Use Information in Settings->About Phone->Battery Use.
Thank you !

serect said:
yep~~ I had do a phone reboot. The picture which i posted before is a result after phone reboot.
Anyway , much appreciated your instant reply ,I will do a phone reboot again and observe if any change on battery usage.
Click to expand...
Click to collapse
It is a pity that i got a trial expire after my phone reboot .
It seems the battery usage has improve after reboot. But I only power on 37min~~lol...

serect said:
It is a pity that i got a trial expire after my phone reboot .
It seems the battery usage has improve after reboot. But I only power on 37min~~lol...
Click to expand...
Click to collapse
Well I believe that at least until you would recharge your phone you would not see anymore that high usage report...
Please check the Market for an update, trial period extended

muntos said:
Well I believe that at least until you would recharge your phone you would not see anymore that high usage report...
Please check the Market for an update, trial period extended
Click to expand...
Click to collapse
...I found when my trial expire , the "screen on lock" function automatically been disable , that's why I got a lower battery useage.
And I have a suggestion when the trial expire , I hope I have a chance to disable the Total Screen Control service , everytime I only been stick on "buy" or "close" option , but the service is still been enable there and i have no chance to disable it.
...It make me only have one option to uninstall it , too bad...

Setting Screen Dim Amount When Inactive?

I would like to use my fire tablet as an alarm panel. Found a few apps that display full screen web pages, that works good. In the development options I turned on "stay awake" so the panel could always be on. After like 30 seconds of no using the screen just barley dims. I would like to dim the screen as much as possible after no use. Anyway to override this amount? I found several apps that can set the dim amount, but just by a schedule, not by inactivity. Or even a web browser app that can control the dimming when not in use?
Thanks a bunch!

Coods said:
I would like to use my fire tablet as an alarm panel. Found a few apps that display full screen web pages, that works good. In the development options I turned on "stay awake" so the panel could always be on. After like 30 seconds of no using the screen just barley dims. I would like to dim the screen as much as possible after no use. Anyway to override this amount? I found several apps that can set the dim amount, but just by a schedule, not by inactivity. Or even a web browser app that can control the dimming when not in use?
Thanks a bunch!
Click to expand...
Click to collapse
Unfortunately, not possible on this device. Minimum brightness level set in kernel (possibly a panel/controller limitation) with no known workarounds (via Xposed). To date this is the only device I own that exhibits this behavior.

Thanks for that info Davey. Maybe I'll see if I can create my own app with a webview that will dim when not touched for a period of time. Since it seems an app can control the dim level. Thanks again.

Coods said:
Thanks for that info Davey. Maybe I'll see if I can create my own app with a webview that will dim when not touched for a period of time. Since it seems an app can control the dim level. Thanks again.
Click to expand...
Click to collapse
Ah - so you are not experiencing any dimming vs dissatisfied with the minimum level. Couple thoughts:
- might be able to use an automation tool like Macrodroid or Edge (w/Xposed) to dim the screen on a particular action like last user action or time of day; Tasker (a fan favorite) can do this as well but is overkill for your needs IMO
- blue light filters can emulate deeper dimming levels but you won't realize the associated battery saving as backlight level remains untouched; the again you device is likely plugged in when used as an alarm clock

Unfortunately Macrodroid and Tasker can not listen for inactivity/idle events. Sounds like an Android limitation: http://macrodroid.freeforums.org/inactivity-period-as-trigger-t86.html
Not sure what Edge (w/Xposed) is, not finding that?
Thanks Davey!

Coods said:
Unfortunately Macrodroid and Tasker can not listen for inactivity/idle events. Sounds like an Android limitation: http://macrodroid.freeforums.org/inactivity-period-as-trigger-t86.html
Not sure what Edge (w/Xposed) is, not finding that?
Thanks Davey!
Click to expand...
Click to collapse
Edge is a module for Xposed Framework. You might also consider a different trigger sequence than inactivity/idle, eg: touch, activity atart or time of day. Might need to get a little creative with the thinking

Few things i noticed after upgrading to Android Q

I made a post after getting pie update and now, here is an in-depth list of features of android Q in ZMP M1
all phones are not getting the same features
removing screen lock /fingerprint doesn't save you from password after update (at least it didn't work for me ) make a backup of everything in case you need to reset
list of things I'll suggest making a backup
WhatsApp chat
google photos
apps with es file explorer or any such file manager
settings + contacts+ call log+ messages from settings backup
notification led :
I like to turn it off all the rime even when charging but in android Q I couldn't find any way to disable it during charging
i was checking my old post about pie
1. Ambient Display : settings>display>advance>Ambient Display
It works only when you get a notification (its dope would like it being enabled always) though Daydream nowhere to be found.
Click to expand...
Click to collapse
so ambient display is gone screensaver is back (edit: its renamed and moved to display lock screen area as new notification toggle)
volume panel:
change volume click more slider button and this is how to devolve UI it shows a big screen covering prompt to show sliders
font in developer settings only two options device default seems better
no third-party launcher supports the new gesture navigation but it is a problem on google's part
left earphone to week? there is audio balance in assessability settings
vibratin and haptic feedback in assessability
not the true dark mode in assessability settings dark theme and color inversion options are nearby enough to test what we could have got for dark mode
dark mode doesn't get turn back to a light mode in live wallpaper
assessability volume key shortcut might come in in handy for some but it makes a notification sound
there is charging sound and vibration in sound settings might want to turn it off, I have seen Samsung charging sound but Asus just makes the phone vibrate with a faint sound might scare people who don't know as it's on by default in android q
I am getting the rotate once button in navbar when autorotate is off I am using two-button navigation and a small circle when using gesture
the lockdown option to prevent unlock by any other means now also prevents notification to show can be enabled in display>lock screen display> show lockdown option
in gesture navigation you can swipe up and continue in an app to make it go smaller beyond it should go
to start android it asks for setup screen lock password it is stepping in the right direction but we should have it in kernel/bios as once entered in recovery mode anyone can reset a phone
QR code to share wifi available
still no way to monitor or block devices connected to your hotspot
default Bluetooth name QCOM-BTD Qualcomm's BLE chip?
widgets to settings shortcut there should be system UI tuner after opening it shows this funny warning message
apps notificatio>notification snoozing useless button more useless because cant see snooze option in youtube notification
battery saver got new auto turn off at 90% feature
battery picture in battery settings seems thick would prefer "ampere app" like stats in later versions
display don't have color temperature adjust
accelerated location something about data storage and data concent
high accuracy, battery saver, etc options for location not available
google play system update is 1 January 2020 please update it
security patch is 5nov 2019
privacy section is great but would like fingerprint prompt in autofill scenario as like for wifi sharing
digital wellbeing well let's skip it as I already have 18 unlocks 1 hr30 mins in the settings app and will have 4hr+ in youtube so let's skip it
verificatin code auto fill in google settings I something nice to have but also worrying
now you can directly launch apps from app info after force stopping
in about phone >emergency info> medical info you can add your profile pic and emergency contacts
dev options> picture color mode sRGB does this option even work any were?
in dark mode theme when searched in settings there is a white padding
dev options> game driver properties I don't know what it does perhaps boost graphics performance
feature flags section in dev options shows nothing except experimental (edit: these were removed in Q beta 3)
system traces have many options like pre CPU buffer and in the category, it has some tick box options and possibly CPU performance after we stop getting updates
swipe up to recent in any navigation option seem a bit too sensitive
audio seems of though I only watched youtube (Linus tech tips) so far that is without headphones
in dev options audio Bluetooth codec shows APTX HD and other option which might make Bluetooth audio great
in dev options profile HWUI seems new but not sure what it is the bars shown on-screen seems familiar
in dev options adaptive notification priority makes no difference and doesn't have any description but a quick google search shows it is supposed to make low notification priority genital
in dev options apps can be installed in external storage option
in dev options force activities resizable doesn't work in split-screen view but I may be doing something wrong
also I hate the lock icon when unlocking also there is no center icon with face/fingerprint or padlock in lock screen
in dev options wifi entending option might help in office or home to extend wifi if it works
in dev options enable freeform windows doesn't work
in dev options forced desktop scant be tested as no video output but wireless display might allow haven't tested
in dev options I enabled bubble notification will add things that can access it
in dev options auto fill section is too vague and I am not getting what anything does
in the last pie post I said
2. icons in overview/multitasking screen
Settings>apps>default apps>home app> quick setup(new name for launcher3)>home screen>home settings>change icon shape >go back to your preferred launcher.
Click to expand...
Click to collapse
it is now in theming in dev options
also ambient display (not to be confused with screensaver) kicks in when getting notification while the screen is off (edit: realized after posting this Asus renamed and moved to it to display> lock screen display> new notification )
widevine changed to L3 its used to stream Amazon Prime Video, BBC, Hulu, Netflix, Spotify, and Disney+ use Widevine DRM to manage the distribution of premium content. as a college student who has no job and already has to spend money on Jio internet I don't have any above-mentioned subscriptions and if you do use any services according to other beta testers you won't be supposably able to access them while in beta.
camera app
in pro mode no shutter speed control option
max iso in pro mode is 1600 like in HMD global camera
auto video encoder is h264
portrait mode has extremely bad edge detection
night mode isn't that good
no fps option for video like 24,25,29.98,30,60 fps etc
no raw support in stock camera app resulting in assumption camera2api isn't enabled by default, though I enabled it in pie and it carried forward maybe so I am not sure.
it is a bit long but if you are reading this then thanks for reading till the end I'll format the whole thing later

{Mod edit: Quoted OP removed for better reading}
There's really no option for notification led,
You get wake display for new notifications in lock screen display
I don't like that either its ugly pie sliders were better.
Is that even important fonts are fonts and generally no aosp thing gets custom font support and Google sans are for pixel things. Idk about which fonts will our phone get.
Third party launchers will work after December android security patch builds.
Dark mode is in display options and works good.
I don't know what dark theme and wallpaper have to do.
The srgb thing works but android or its apps aren't made to use srgb colors default is rgb which is used by most of the web.
Feature flags were removed by Google in beta 3 of Android 10.
Force activities resizable makes apps which don't work or don't allow split screen (insta) are made to be opened in split screen.
Enabling free form works and can be accessed from recent apps screen - click the app icon - open in free form. (don't know how you tested it)
Auto fill helps in password managers to fill in usernames and passwords.
It's in wake display also same to your missing ambient display.
Other things I've left are either too much to explain / really broken / I don't care of those since I don't use it.
Widevine has changed to l3 you didn't notice.
Sound output isn't very great it'll be fixed in next build I've reported that to asus.

There's really no option for notification led,
Click to expand...
Click to collapse
it is named as blink light there is a way to just turn it off but it still lights up when the phone is turned on which previously in the android pie it didn't
You get wake display for new notifications in lock screen display
Click to expand...
Click to collapse
I realized it too late going to edit it in
I don't like that either its ugly pie sliders were better.
Click to expand...
Click to collapse
the only good news I have is while in a call it shows call slider normally.
Is that even important fonts are fonts and generally no aosp thing gets custom font support and Google sans are for pixel things. Idk about which fonts will our phone get.
Click to expand...
Click to collapse
no it isn't that important but I thought that it's interesting and the options are:
device default.
noto serif/ Source Sans Pro.
Third party launchers will work after December android security patch builds
Click to expand...
Click to collapse
You are talking about gesture navigation, right? Teslacoilapps says this.
Dark mode is in display options and works good.
Click to expand...
Click to collapse
Like the official Reddit app has a dark modeand AMOLED dark mode. the difference is #333943 and #000000. The dark mode is not truly dark but gray.
I don't know what dark theme and wallpaper have to do.
Click to expand...
Click to collapse
In Android pie when you set the theme to dark mode and use live wallpaper it uses auto revert back to light mode now it doesn't.
The srgb thing works but android or its apps aren't made to use srgb colors default is rgb which is used by most of the web.
Click to expand...
Click to collapse
nowadays phones are getting so powerful and people can take great pictures so shouldn't sRGB be enabled by default? like it does help semi-professional photo editing if we get a bit more color accuracy.
Feature flags were removed by Google in beta 3 of Android 10.
Click to expand...
Click to collapse
I didn't know that, but now I do. Thanks for that.
Force activities resizable makes apps which don't work or don't allow split screen (insta) are made to be opened in split screen.
Click to expand...
Click to collapse
My bad, I thought it allowed resizing the split-screen apps like increasing the top window while decreasing the bottom one
Enabling free form works and can be accessed from recent apps screen - click the app icon - open in free form. (don't know how you tested it)
Click to expand...
Click to collapse
Samsung has a float window feature like actual windows pc like windows I thought it was like that feature i tried it as you mentioned but didn't get results i was expected
Auto fill helps in password managers to fill in usernames and passwords.
Click to expand...
Click to collapse
I think this is about this line
in dev options auto fill section is too vague and I am not getting what anything does
Click to expand...
Click to collapse
My question is what is
logging level
off
debug
verbose what does these mean
max request per session (it's just a field to enter a number what does it control)
max visible datasets (it's just a field to enter a number what does it control)
It's in wake display also same to your missing ambient display.
Click to expand...
Click to collapse
I found it after posting this thread and didn’t get a chance to update it.
Other things I've left are either too much to explain / really broken / I don't care of those since I don't use it.
Click to expand...
Click to collapse
things are too much to explain / broken but I like to deeply analyze things and couldn't find an in-depth bug list while thinking whether I should get in beta so after upgrading I made one. it has some errors but I am working on it
Widevine has changed to l3 you didn't notice.
Click to expand...
Click to collapse
that's something related to Netflix i don't have an account so wasn't able to notice it, though I saw it mentioned it in Asus forums
Sound output isn't very great it'll be fixed in next build I've reported that to asus.
Click to expand...
Click to collapse
I saw this problem also mentioned in the forums and I asked my friends if my phone sounds different and didn't got any negative report also I watched youtube for 4hrs on Thursday and didn't heard any difference

Would be interested to know how to turn off the lock screen. Lock screen none does not appear as an option.
Regards.

Gestures are enabled by Google after December security patch nova / most other launchers work with gestures. You can however use 2 button and 3 button navigation perfectly.
About that dark and black mode difference we don't have an amoled or led display it's an lcd so it won't make difference in battery but kind of personal choice. I like dark more than black.
The thing about wallpaper and dark thing - in android 9 dark/light theme was set by wallpaper color so live wallpapers needed to support color picker api to tell the device to keep light or dark theme. (it was half broken by asus as selecting dark theme should've disabled the api completely, but using pixel default live wallpapers they had that api so dark mode worked with them).
That srgb was being considered by Google they dropped it as it broke a lot of the things.
You can resize top and bottom windows just hold the middle line in centre and drag it where you want to put it. (I use 400 dpi so I get more steps).
It's because that feature is intended towards large screen tablets or foldables and Samsung made their own thing, (the free form window thing).
It's for devs making password manager apps or autofill apps those people need it for debugging, the logging levels are to make reports to find bugs, the max request is how many times in one field the autofill will attempt to fill in credentials. The max visible dataset is if you have multiple accounts to one app (take Gmail as example) so while trying to autofill it lists all of available accounts to show (I'm not an expert in this so I maybe wrong if needed confirm that.
About sound issue it is very real and use some good quality earphones or compare side by side with 060 running device.