Related
If you are looking for how to get back to stock Bell, go HERE.
Disclaimer: I have not tested this on anything but my phone. This is a development section of a hacking website. Make backups. Know what you are doing.
Credits:
Brut.all for apktool
edgan for 2nd-init
designgears for aroot inspiration.
xda for being a source of info.
Requirements:
Windows 7 or Ubuntu 10.10+ (10.10 and 11.04 tested)
Java installed. (For applymods, it uses apktool)
Running Phone, not in recovery mode, etc.
Tips:
Don't factory reset please if something goes wrong, it just erases your personal settings, it doesn't write to the system partition. It also deletes your data partition, making it harder to get back to stock.
Early usb mode, turn your phone on while holding down the lower volume button, when it says fastboot, release and press volume down repeatedly until it says early usb enumeration, then press up volume. It takes 30 seconds or so before adb is ready.
Version 9:
Download it here.
What's new:
Added support for 2nd-int (WIP, tested on stock Bell only)
shsu updated to allow a super user to become a super user, acts like sh in that case.
fixed linux install_recovery.sh and uninstall_recovery.sh scripts to use shsu instead of remaining using su. Ditto with ApplyMods.sh
Boot animation now smaller, using jpegs instead of png files, no difference in appearance.
Version 8:
Download it here.
What's new:
Added full phone backup and full restore phone options to the menu. It will download a backup if there is none found.
root script more universal, tries psneuter first, then gingerbreak.
Early usb recovery updated, now uses a tmpfs for system, also mounts /sdcard and /sdcard-ext.
Deodexed French 2.1.1 files incorporated.
Misc fixes
Version 7:
What's new:
New Menu script for windows and linux in the top folder, double click Menu and enter options.
ApplyMods and other scripts updated to use /data/local/tmp/system, this means I can update system.tar.gz and add folders to be copied into system.
Early USB enumeration recovery option. (experimental but useful as is)
Fixed bugs in windows scripts. Can't get user input from bat file while in a parenthesis block apparently.
Bloat backed up to sdcard now
root and unroot scripts updated with more prompts for rebooting phone.
Version 6:
What's new:
Support for Telstra 1.4.2.
ApplyMods can create signed update.zips now, Create_update.bat updated. both using basic ready made scripts in main bin folder instead of creating them on the fly, CR LF issues.
Updated root and unroot scripts, more fool proofing, has to be Bell stock firmware (psneuter doesn't work on telstra).
Includes basic boot animation, and mod for Bell apn on telstra firmware. (Have to reset to default under access point names in settings.)
transparent status bar, yellow tinted white for text color, matches front buttons somewhat.
Version 5.1:
Features:
Works under Linux and Windows 7
Includes root and no ads scripts
Patch system for applying modifications.
What's new:
New scripts for doing mods, fixes issues with patch 9 images.
Updated root and unroot scripts, more fool proofing.
New RestoreSystemPartition script
Custom apktool for more [hopefully] bug free installations.
How to use:
Extract archive, keeping folder structure intact.
run a command prompt/terminal (There is a link to one in the windows folder)
run root.bat or root.sh from the linux or windows folders, depending on which one you are using.
Turn the phone off after that is done and turn it back on again.
The rest of the scripts shouldn't be run with psneuter affecting the phone.
run ApplyMods.bat (.sh) [OPTIONAL] This applies webtop hack and translucent status bar, translucent notification drop down, etc. Select update system.tar.gz.
run install_bell_deodex.bat or .sh
System image of stock Bell.
Mirror of above
Cheers!
Very nice! Looks good!
Will try this when I get home
Sent from my Motorola Olympus
So what is the benefit of this? Will I be able to theme my device with some of the themes that are available? Or should I play it safe and wait for a bell. Sbf to leak before I try anything and brick my phone again lol thanks in advance
EDIT: i see that you have included soft_brick.bat is it the same as this one http://forum.xda-developers.com/showthread.php?t=982859 because that one did not work for me thanks again
Sent from my MB860 using XDA Premium App
cool, i'll try this tomorrow when i don't still have a ****load to do and only 5 hours to sleep
nice to see a Bell dev here!
Also I just wanted to say major props for the crazy awesome idea of doing over-the-air download and installation. Really smart and original.
Atrices, just so you know
NFHimself said:
Hi,
(What is the plural of Atrix?)
Click to expand...
Click to collapse
Can I run this on my mac? Sorry relatively new to adb
Sent from my Motorola Olympus
you could run it on a mac, just had to edit the script a bit.
Hi,
So what is the benefit of this? Will I be able to theme my device with some of the themes that are available? Or should I play it safe and wait for a bell. Sbf to leak before I try anything and brick my phone again lol thanks in advance
Click to expand...
Click to collapse
I wouldn't try theming with ATT files, I would take what was done to them and apply them myself to the deodexed files here. There may or may not be differences that are not obvious. I am never really sure if there is any benefit to this stuff, it's fun to do, about it.
EDIT: i see that you have included soft_brick.bat is it the same as this one http://forum.xda-developers.com/showthread.php?t=982859 because that one did not work for me thanks again
Click to expand...
Click to collapse
The soft_brick.bat script is specific to the folders I am using for transferring data to /system/app and /system/framework. It tries to get root via psneuter, mounts system read write, deletes dalvik-cache files, and tries to copy the files already on the phone to the right folders. It could be that just one file caused the phone to crash mid copy and copying it again will fix things. This avoids trying to do a usb data transfer of all the files which you don't have time to do otherwise. I was also thinking that install-recovery.sh would be a good place to do this, (and then clobber it later with the init.d hack) but I couldn't find setprop and I wasn't in need enough to select a file to use as a semaphore.
Can I run this on my mac? Sorry relatively new to adb
Click to expand...
Click to collapse
It would be easier to do it all from a sh script really, and that would likely be more compatible with a Mac.
Also I just wanted to say major props for the crazy awesome idea of doing over-the-air download and installation. Really smart and original.
Click to expand...
Click to collapse
Thanks!
Cheers!
maledyris said:
Atrices, just so you know
Click to expand...
Click to collapse
Thanks, a lot, really, 10 chars..
How do I recover from a softbrick from this? Thanks.
Before anything is done, all the files are extracted to /data/local/tmp/app and /data/local/tmp/framework. If you run into problems put the phone into fastboot/early usb enumeration mode (see here) and run soft_brick.bat (.sh for linux)
Quote:
A soft brick, in this case, is when you make a bad edit to your framework files and the phone won't fully boot and starts flashing a red LED at you.
There is one catch, you only get about 1-2min to do all of this before the phone reboots on its own. If that happens, do SuperOneClick steps again and continue where you left off. Better yet, build a script to do it all for you
Power off your device
Enter Fastboot:
Hold Volume down + power until you see Fastboot at the top left
Use volume down to scroll down to "Early USB Enumeration" (only shows one item at a time, if you pass it, keep going down, up selects)
Press Volume up to select
This is the message I get when i run the batch file.
This is of course when invoking Early USB Enumeration.
Wait for the count down to finish ...
'TIMEOUT' is not recognized as an internal or external command,
operable program or batch file.
clearing Dalvik cache..
rm failed for /data/dalvik-cache/[email protected]*.dex, No such file or directory
rm failed for /data/dalvik-cache/[email protected]*.dex, No such file or director
y
rm failed for /data/dalvik-cache/[email protected]*.odex, No such file or directory
rm failed for /data/dalvik-cache/[email protected]*.odex, No such file or directo
ry
reinstalling apps
cp: cannot stat '/data/local/tmp/app/*': No such file or directory
reinstalling framework..
cp: cannot stat '/data/local/tmp/framework/*': No such file or directory
done.
The timeout message means you are running a version of windows without timeout, see adeo thread.
The lines for rm just mean there are no files to delete in the Dalvik-cache, which is normal, you should see that the second time around.
The cp lines are saying that there are no files in /data/local/tmp/app (/framework).
So, that's unusual, in order to get soft bricked using my script you would to have copied files from /data/local/tmp to /system, and if you are bricked would be unable to delete the files afterword.
sequence:
cd /system
cp /data/local/tmp/app/* app/
sync
reboot now
**brick**
So, how are the /data/local/tmp/app files being deleted?
No clue. I'm not sure what to do here? Is my phone permanently bricked? Any other way to recover from this? The one thing that could have gone wrong is I tried installing from my behind my works firewall. Maybe I could not download the proper files.
No, you are soft bricked, you only made a change (that I know of) in system files.
Were you rooted before you tried this?
If you copy the soft_brick.bat files and change the last line to be adb.exe shell ls -R /data/local/tmp, what do you get?
Basically, it sounds like to need to get the files copied over to data/local/tmp, how they are missing/inaccessible is odd. So, create a script to copy the files over bit by bit, might take a while but it should be able to be done.
EDIT:
Do this:
from command prompt:
adb.exe shell ./data/local/tmp/psneuter
wait a few seconds
type this:
adb shell ls -l -R /data/local/tmp
if psneuter fails, it isn't in /data/local/tmp, which is also odd.
I was rooted before this. So I should attempt all these commands while Early USB Enumeration right? That doesn't give me much time Lol.
OK, here's the output.
C:\bell_deodex>adb.exe shell ./data/local/tmp/psneuter
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
property service neutered.
killing adbd. (should restart in a second or two)
C:\bell_deodex>adb shell ls -l -R /data/local/tmp
/data/local/tmp:
-rwxr-xr-x root root 585731 2011-01-09 02:02 psneuter
-rw-r--r-- mot_tcmd mot_tcmd 4 2011-03-30 21:00 ap_tcmd.pid
C:\bell_deodex>^A
And sorry to be a pain. How would I create the script? What are the files that need to be copied? Are they included in your script?
Hey, guys after hours of thinkering it seems i devised a fix (at least a temporary, i guess it can be better implemented), but still wifi works with turned on radio.
I will not be doing any scripts or whatever.
DISCLAIMER
THIS IS ALL ON A BASIS OF INFORMING PEOPLE
I AM NOT RESPONSIBLE FOR ANY DAMAGE, LOSS OF DATA, OR BRICKED DEVICES IN CONJUNCTION OF TRYING OUT THESE STEPS
DO IT ON YOUR OWN RISK.
K now the requirements:
1. nonworking sim card (or att sim card)
2. RSD lite 5.0
3. stock 4.1.2.6 SBF flash file
4. Installed drivers on the computer for rsd
5. GladRoot http://forum.xda-developers.com/showthread.php?t=1016060 than you very much Ririal
6. OTA update
7. Working adb shell (there are other ways too but i prefer this one so ill write how i did it)
8. SQL editor, i used SQLite database browser (get it online its freeware)
9. titanium backup (if you wish to backup things, YOU MUST NOT RESTORE the [SETTINGS/BLUETOOTH] Settings Storage 2.2.1 however.
10. turned debug mode on when using adb
The process:
1. backup your data
2. Flash the stock image with RSD lite as its written here http://forum.xda-developers.com/showthread.php?t=991072 thank you kennethpen
3. put in the nonworking/att sim turn on the phone use wifi to configure motoblur
4. do not download the update yet
5. obtain root as described here, use the 1.5.7 method tho since we will be updating the ota http://forum.xda-developers.com/showthread.php?t=1016060
thanks again ririal
6. download and install ota update
7. do the afterupdate with the GladRoot
8. still on wifi, set up google account, update market gmail etc.
9. use adb/root explorer to copy the /data/data/com.android.providers.settings/databases/settings.db file to your sdcard into a directory you made before (name doesnt matter) example:
Code:
adb shell
su
cp /data/data/com.android.providers.settings/databases/settings.db /sdcard-ext/test
10. put phone into airplane mode, turn off phone
11. put in your sim card, turn on
12. let it boot and wait a min or two
13. before sliding press and hold the off button and choose airplane mode (it is IMPERATIVE that airplane mode is turned on)
14. sign into motoblur again (wifi should still work - turn it on tho since your in airplane mode)
15. repeat step 9 but copy to a second directory (lets say test1)
16. turn airplane mode off - you will loose wifi and sign into motoblur again
17. repeat step 9/15 but copy to a third directory (lets say test2)
18. copy the files from test2 and test1 to your computer - obviously to two different folders (use mass storage setting or adb pull)
19. open up the settings.db with sqlite from the not working config (in our case the one in test2) go to browse data and table secure
20. find the entry wifi_country_code and the value will be the one of your country (at least so it was with me), change that value by double clicking on it to US
21. Save the file
22. copy to your sdcard via usb to a directory lets name it "works"
23.turn off your phone, and put in the nonworking/att sim card, power it up
24. register motoblur again blah blah (ye its annoying there are ways around but that comes later and we needed it for the ota update)
25. turn the airplane mode off (its imperative to do so)
26. now we use adb again:
Code:
adb shell
su
cd /data/data/com.android.providers.settings/databases
rm settings.db
cp /sdcard-ext/works/settings.db .
chown system settings.db
chgrp settings.db
chmod 440 settings.db
cd ..
chmod 555 databases
exit adb shell with ctrl+d (in linux dont know about windows)
27. turn off phone, put in your sim card, turn on phone, register motoblur
28. most probably wifi will work for a moment than it will stop working and youll get a notifiaction lost data connection and something on (at least so it was for me)
29. use the wifi toggle on/of button to turn off and on the wifi a few times, than at the third or fourth time turn it off than on than immediately go into the browser and click on refresh as soon as you see the wifi icon in the notification tab. WiFi should work now, you can even turn it off and on with the wifi toggle button and it still works.
30. ANOTHER WARNING THO, THERE ARE QUITE SOME DRAWBACKS TO THIS METHOD (WHICH I HAVENT DISCOVERED ALL YET, TO BE HONEST BUT IM SURE THERE ARE QUITE SOME - SINCE WE DO NOT ALLOW THE SYSTEM TO EDIT THE SETTINGS.DB ANYMORE - BY CHMODDING THE PERMISSIONS), AN ISSUE I SAW IS THAT YOU CANNOT GO INTO AIRPLANE MODE ANYMORE - that is because the airplane mode state is saved in the same settings.db as the setting that blocks wifi, and if you just change that one and dont write protect the file and the databases folder the system just overwrites it again, so for now this is it.
AGAIN this is all on your own RISK, i cannot bi liable for anything out of the ordinary that happens, damages or whatsoever your phone or even you.
So now im awaiting responses if it works for you guys.
Oh and a few of the steps are just for backup purposes
Many thanks goes to Azuzu aswell, he was of great help all the time.
What about for the Canadian Bell Atrix can you please help us.
When I insert non working sim card into the phone, wi-fi working only once, after booting. Then when phone is going to lock, wi-fi is sleep and never work again. Is it instruction help to work with wi-fi during the day without rebooting? Thanks for instruction!
---
All is fine with Wi-Fi when it in Motoblur...
What about GPS?
May be needed to add GPS ON in this instruction?
Thanks guys. Its work for me. But too much DRAWBACKS. GPS does not work, settings are not saved
my friends you figured it all out like i did after a day of testing.
As i already said before there are some rather big probles that arise with this method, however for now this is the only way i found to having a working sim +wifi working.
Basically all the issues arise from the settings menu, since the settings from there are stored in the setting.db file that we disallow changing, due to this fact, i have devised a rather simpler way to do all the above + apply your specific settings - however you still wont be able to change them once you change the permissions.
1. gps state cant be changed as reported
2. ringtone/notification tone cant be changed
3. USB mode is stuck in NONE mode or the one you changed it to before doing read only
4. Possibly you cant pair new BT devices (havent tried that but i assume it might happen)
5. cant change lockscreen type (so if you pick fingerprint afterwards it wont change the lockscreen)
6. more possible problems, still if you want wifi you will endure some of those, they are however rather easy to fix, for people who dont change things all the time.
7. i found out that you have to turn off and on wifi (with the widget or in the networks menu) 2 times to make it work and it stops working if your phone changes the network from 3g to 3g or vice versa, however you just turn wifi off and on again and its fine (eventually you can just set your phone to 2g only or 3g only - either the dialer method or edit a config file - ill post that another time)
8. airplane mode not changing as stated above
So i did it like this this time:
lets assume you already have the phone 1.5.7 rooted (you can even have 1.2.6 rooted but the ota update brings nice features like longer battery, better fingerprint reader etc) and activated. NOW THIS SHORTENS THE PROCESS BY FAR and improves on the things that werent working before, it might lower battery life minorly but, well mine is still at 70% after ~16 hours so )
YOU WILL HAVE TO DO THIS ONLY ONCE (well at least until you want to change your ringtone hahaha )
1. Put in your working sim (just into the rooted atrix and the databases dir has to be read write like before, if you followed my guide above you have to go with adb shell to /data/data/com.android.providers.settings and write chmod 755 databases)
2. turn on phone in normal mode
3. set all your settings as you like and i really mean all - ringtones notifications - everything you can think of
4. turn all the networks on - wireless (it wont work but the state has to be on), bluetooth, gps - the thing is you can always turn them off, but if you write protect the file with them off you cant turn them on properly
5. pair your bluetooth devices (all of them) - havent tried yet if necessary but i think it is
6. reboot phone into normal mode, assure yourself that all the things are as you like
7. connect phone in debug mode, and set usb to none (it will stay in the none state, but you can always copy stuff with adb over, to your sdcard/internal phone mem as opposed to choosing mass storage mode where you have no adb access to them, but that is your choice ( you can manually change the state in the settings.db before making it read only, but i wont go into those details now)
Code:
adb shell
su
cd /sdcard-ext/test
cp /data/data/com.android.providers.settings/databases/settings.db .
ctrl+c/d to exit shell
8. connect phone in mass storage mode, open the settings.db file in the /sdcard-ext/test with the sqlite editor go to the brose tab, and secure, change the wifi_country_code value to ALL (last time i wrote US but ALL works fine so its more relaxed), save it
9. change the usb connection mode back to none
10. failure to chown and chgrp the settings.db to system and chmod it correctly can results in a soft brick
Code:
adb shell
su
cd /data/data/com.android.providers.settings/databases
rm settings.db
cp /sdcard-ext/test/settings.db .
chown system settings.db
chgrp system settings.db
chmod 440 settings.db
cd..
chmod 555 databases
reboot
11. the phone shoudl reboot now with all the networks turned on, you can use the widgets (or int he wireless menu) to turn off wifi and bluetooth (tested it myself and it works), havent tested gps turning off yet, but its no problem since gps turns on itself only when apps use it (maps etc, weatherbug can use it aswell, so might check into it if its permanently turned on than)
12. turn wifi off and on 2-3 times, than turn it on, it should be working now
Thanks for testing this out to confirm that it works at least
Anyhow if someone might get a clue what issues the command to change the wifi_country_code hes encouraged to share, so we can only fix that problem and there wont be these side effects than
you can however change all the settings by just editing the settings.db with the sqlite editor manually, youd have to figure out all the parameters and values yourself (some are fairly easy - for instance for usb mode, some can be rather hard - for instance ringtones, cuz you must have the path and everything)
EDIT, YOU CAN LEAVE OUT THE PAIRING BLUETOOTH DEVICES STEP, pairing works, i just tried it with an apple bluetooth kb, and its fine.
RacecarBMW i cannot say anything with certainty, since i dont have one to test it on, but probably the same method would work for the bell atrix (use the method in the post above, with the ALL value for wifi_country_code), however you have no sbf to flash and its way more dangerous that you will create a softbrick, so please be very careful and its all YOUR RESPONSIBILITY. I AM AND WILL NOT BE LIABLE FOR ANY ADVERSE EFFECTS.
We need to lock only some rows in db file or creating daemon which would keep these lines in memory. Is it posible with SQLite?
crnkoj Please change on step 10 in listing:
cd /data/data/android.providers.settings/databases
to
cd /data/data/com.android.providers.settings/databases
I do all steps and my GPS works fine... Thanks
how can i undo this:
chown system settings.db
chgrp system settings.db
chmod 440 settings.db
chmod 555 databases
what's default settings?
loggin111 said:
how can i undo this:
chown system settings.db
chgrp system settings.db
chmod 440 settings.db
chmod 555 databases
what's default settings?
Click to expand...
Click to collapse
you can just enter to another folder to /data/data/ directory with cd and run ls -l to view directory permissions.
chmod 755 databases
and something like 755 for settings.db
thank you Jartyn, replaced that in step 10. And yes Jartyn exactly as you say we jsut have to keep this line permanent and everything else changeable (maybe there is an option in sqlite to block only 1 line? - i dont know so much).
I do however know now, which process is changing this:
it is the WifiStateTracker ( http://www.androidjavadoc.com/1.1_r1_src/android/net/wifi/WifiStateTracker.html ) from android.net.wifi , i however dont know where to find this on the phone.... we would most probably only have to change one line in the WifiStateTracker and it would work fine (however this still wouldnt be fixing the source, we would just fix the change in country code, yet the reference to which its compared is still unknown to me, but i think it would suffice for us) the funny thing here is the WifiStateTracker is not in the official android tutorial tho:
http://developer.android.com/reference/android/net/wifi/package-summary.html
so if anyone knows where to find this we could fix it easyly
1.5.2
crnkoj said:
thank you Jartyn, replaced that in step 10. And yes Jartyn exactly as you say we jsut have to keep this line permanent and everything else changeable (maybe there is an option in sqlite to block only 1 line? - i dont know so much).
I do however know now, which process is changing this:
it is the WifiStateTracker ( http://www.androidjavadoc.com/1.1_r1_src/android/net/wifi/WifiStateTracker.html ) from android.net.wifi , i however dont know where to find this on the phone.... we would most probably only have to change one line in the WifiStateTracker and it would work fine (however this still wouldnt be fixing the source, we would just fix the change in country code, yet the reference to which its compared is still unknown to me, but i think it would suffice for us) the funny thing here is the WifiStateTracker is not in the official android tutorial tho:
http://developer.android.com/reference/android/net/wifi/package-summary.html
so if anyone knows where to find this we could fix it easyly
Click to expand...
Click to collapse
hi
does it work with 1.5.2 rooted?
i flashed sbf back from unroot 1.5.7 to 1.2.6 , i didn't gladroot because i had not wifi for update & after update.bat
so i stopped @ 1.5.2 & i cannot update anymore, please help me to activate my wifi.....
zeidof you can do it on the 1.2.6 rooted aswell, use the same steps as described above, it should work fine.
hey guys what wifi issues? i have a ATT on vodafone UK and i dont seem to see any issues.
crnkoj said:
zeidof you can do it on the 1.2.6 rooted aswell, use the same steps as described above, it should work fine.
Click to expand...
Click to collapse
Hi can this fix be on a custom rom? i mean it will be included on a custom rom..
ronaldo, use search ... http://forum.xda-developers.com/showthread.php?t=1010942&page=3 lucky you arent one of us who have this issue.
emorej, if you read my first post, it says i wont be doing any scripts/cwm flashable updates/custom roms. If anyone wants to implement this in his rom hes free to do so, he has to be careful tho, since basiically the script that updates it, has to change only the wifi_country_code ALL and than make the databases folder read only, it must not copy over a generic settings.db since there are user specific things in it.
Jartyn and i are trying to figure a more source problem related fix for the issue, but that will take quite some time i fear.
Here is an even better solution from akizakian
http://forum.xda-developers.com/showthread.php?t=1058260
Simplest Solution
I had this same issue and the simplest solution is here:
1. Extract the attached zip file and you will get two files.
2. Turn off Wi-Fi, replace the two files in
/system/etc/firmware/wifi
This can be done using adb or Root Explorer.
turn Wi-Fi back on, and that's it!
Mate you are mistaken, its two totally different issues you and i are talking about, yours is that 5ghz isnt working, mine is that wifi isnt working in certain countries at all. by copying the files you supplied my wifi again stops working, because there is a country lock within the moto atrix wifi drivers (the version doesnt matter, may it be 1.2.6, 1.5.2, 1.5.7 or 1.8.3, the issue you fixed with your method is only the nonworking 5ghz on the 1.5.2. leaked sbf)
ceo.mtcl said:
I had this same issue and the simplest solution is here:
1. Extract the attached zip file and you will get two files.
2. Turn off Wi-Fi, replace the two files in
/system/etc/firmware/wifi
This can be done using adb or Root Explorer.
turn Wi-Fi back on, and that's it!
Click to expand...
Click to collapse
The LG Optimus wifi drivers fixed my simunlocked wifi problem in qatar.
The other solutions that were being thrown around did not.
seems moto is gonna fix it with an update:
https://supportforums.motorola.com/thread/50598?start=15&tstart=0
I had everything working flawlessly until I tried to remove system apps after I rooted it. Radio Lite the ICS 246 back on the phone manuall programmed the phone since I'm on pageplus and get solid 3G on it...how the big issue I'm Facing is
The ACTIVATION screen...it says wait until your phone activated then fails. I tried the touching of the 4 corners and still wont let me pass. I can dial 611 and it goes to pageplus customer service so I know the phone it working ...I cant do the ##7764726 (##program) and change the sim stuff I can do the *#*#4636#*#* without any issues changed it over to cdma Auto PRL. Current prl that was written to the phone was the new 59292.
JUST NEED TO FIND A WAY TO GET PASS THAT NAGGING ACTIVATION SCREEN...
THANKS
You need to edit the build.prop to replace the line which was removed in ICS that enables the bypass.
The line is "ro.mot.setup wizard.enable_bypass=1" and it needs to be added at the bottom of the file in the ADDITIONAL BUILD PROPERTIES section.
You must be certain to set permissions on the file to 644 after replacing the file or the phone will not boot and you will have to flash it again.
This can be done with ADB shell as long as USB debugging is enabled and you are rooted.
cellzealot said:
You need to edit the build.prop to replace the line which was removed in ICS that enables the bypass.
The line is "ro.mot.setup wizard.enable_bypass=1" and it needs to be added at the bottom of the file in the ADDITIONAL BUILD PROPERTIES section.
You must be certain to set permissions on the file to 644 after replacing the file or the phone will not boot and you will have to flash it again.
This can be done with ADB shell as long as USB debugging is enabled and you are rooted.[/Q
Well I can get to the desktop of the phone because of the activation screen so I have no way of editing it. I will have to try something here this morning.
thanks you for the info thoough
Click to expand...
Click to collapse
actually I found it how to get around it ...I guesse i was too tired to spot it last night but it work after watching this video
http://www.youtube.com/watch?v=pPXARCqgrFo
Background
Okay so the glass on my 2013 Moto X broke on September 27th I ordered a new one and while changing it I accidentally broke the digitizer so I disconnected the digitizer and the phone turned on while my digitizer with disconnected then i had no way of turning it off while my digitizer was disconnected the phone started to vibrate every 3 seconds until the battery died... so I was forced to switch over to my Nexus 6 because at the time that was my backup phone because I love the performance of my Moto X.. now a few months later yesterday to be exact my new digitizer arrived and I brought my Moto X back to life powers on and performs just fine
Problem
My wrist twitch to activate camera doesn't work
My dual chop to activate led doesn't work
Whenever I make a phone call or receive a phone call my screen turns off automatically but the phone call works just fine once the phone call has ended my screen does not turn back on I have to reboot the phone to turn on the display again
Phone info
2013 moto x on 5.1.1 stock rom locked bootloader rooted using crashes method with ultra slim root
any help or tip is greatly appreciated
Maybe, but it really depends what's actually wrong. The Moto has a TI MSP430 chip that handles all that 'motion, wave-to-wake, chop-chop' stuff and it's loaded from a /firmware folder or partition (have forgotten at this point). @masterifla figured out which files it was on 4.4.4 & 5.1 that got uploaded to the 430 and wrote a .zip file to change from 4.4.4's "wave to wake" to 5.1 "chop chop" or vice versa. I fixed some little bug in it, and stuck the working .zips up in this post although they may be elsewhere as well: (so :: these zips contain the firmware that actually does the wave-to-wake stuff and can be 'recovery-flashed')
http://forum.xda-developers.com/showpost.php?p=63616790&postcount=17
At least if that works, you'll know that it was the firmware for that chip, and if not, it might actually be the 430 chip(which you can see in the teardown). The post by me and anything by masterifla should be pretty well explained.
Cheers.
but have a locked bootloader I can't flash anything...but you gave hope maybe if I use rsd lite to flash stock I can fix this
BADDINOROX99 said:
but have a locked bootloader I can't flash anything...but you gave hope maybe if I use rsd lite to flash stock I can fix this
Click to expand...
Click to collapse
There still might be a way. I keep trying to have people get this to work, but I'm not sure of the outcome yet, so give it try if you like: Here's some steps:
1) Locked bootloader / no root means mostly that you can't write system, but I'm pretty sure you should be able to temporarily boot into a PC-based copy of twrp. Once in twrp (for one time say) you are root, and you have access to anything on your gizmo. In theory, you should be able to mount system read-write and change something in the file system.
2) Get the correct copy of twrp and adb (from dev forum for this box) and put it on a PC with fastboot in the same folder. To make this easy, called twrp "twrp.img" and call "fastboot" or "mfastboot" fastboot.exe (I am for some reason assuming you've got a PC, not a mac or linux, but the ideas are similar.
3) quick explain of the files in the .zip from above ^^ : 8 files prefixed by MSP that are located when on the moto in /system/etc/firmware. Unzip them and stick them in that same folder.
4) Tricky part : (I think) : reboot into the twrp.img on your PC by getting your device into fastboot / bootloader mode: (so .. volume-up&down&power keys all held down for ~10 seconds perhaps, then if you've gotten it right (it's touchy), you'll be in the bootloader where it has a small tiny text list of stuff like "continue, recovery, etc).
5) you're good with the phone if you've made it here: now on the PC from that folder, type in "fastboot boot twrp.img" and good luck. If it works, your phone will be in TWRP with root access. If not, I don't know another option at the moment.
6) Probably the rest is most easily done from the PC command (or shell) window where the files are. Since your device is in the bootloader and awaiting further instruction, you should be able to use adb to talk to recovery now. so carry on:
7) (get the files from your PC (the MSP prefixed ones) onto the device, so first remount system r/w):
Code:
a) "adb remount" // supposedly should remount system toggling the read attribute to write
b) "adb push msp* /system/etc/firmware/" // copies files to device unless I've got syntax wrong, try one at a time if doesn't work.
c) "adb shell ls -al /system/etc/firmware/" // list all files, and post them back here to see if it even worked.
d) "adb remount" // system partition back to normal ro state.
d) "adb reboot" // moment of truth, a reboot.
8) after things settle post-reboot, check out "wave-to-wake" , camera twist, etc. This works on 4.4.4 or 5.1 (if this other stuff above works).
Note: I could be way off on my idea that rebooting into recovery will give you enough functionality to do this, but I'm not sure what other choices you've got without being able to root. I guess another thing I'm wondering about is why you wouldn't be able to root the phone from recovery regardless of how you booted into it. You still can't unlock bootloader, but I'm not clear on what difference it makes at the moment.
Good luck. It's a "hail mary" pass.
thanks I got my stuff working again ? I screwed up in the file install part freaked out and reflashed stock and rerooted so everything is good now once again thanks
Hello xda,
I have been trying to deodex my stock MM Touchwiz for the past few days, and ran in to a few issues. Maybe someone here can help shed some light.
1) When pulling system files, should I pull the whole /system folder or just certain files and folders within it like /framework and the build.prop?
2) When using adb, I get an error when copying /system/bin/resetreason, saying I don't have permission. I have a rooted device, and I use adb root before doing anything. I tried adb remount, but it says I am not running root. I checked rootexplorer, my permissions for this file is 710, but all others are 755. I am considering setting /system to 755 or greater to possibly fix this, and any other potential files that will present this same issue, but I am not sure if setting that folder to that permission is safe. Thoughts?
3) To remedy the adb not running in root, I downloaded CF's usb Insecure, but every time I activate insecure usb, debugging automatically disables. This is supposedly a common issue with Samsungs. If I am correct, setting SELinux's to permissive is a fix, but setenforce 0 in the shell sets my phone offline when done on my computer, and yields no result on my phone. Any nudge in any direction would be greatly appreciated.
4) The folder csc_contents for some reason refuses to copy to my computer, giving the error that it is a folder. My adb has a sense of humor, apparently. I am lost here.
It's a Note5 (920W8), rooted stock 6.0.1. TWRP.