Database Develop

Can't go to recovery, can i live with it?

My CAP cant go to recovery and due to that i didn't play to much with it.
Is this a major problem? Or am i over reacting and its ok. Just use rom manager and use it for going to recovery
Sent from i897

As long as you can see a screen or have your computer see it (ADB Reboot Recovery) you should be ok. I'd just be extra careful on what your doing to ensure you keep your screen alive.
Some builds seem to break that option to allow you to go into recovery/download/master reset.
Meh - gotta love android.

iakovl said:
My CAP cant go to recovery and due to that i didn't play to much with it.
Is this a major problem? Or am i over reacting and its ok. Just use rom manager and use it for going to recovery
Sent from i897
Click to expand...
Click to collapse
So you are installing custom roms and stuff like that? what if something goes wrong, the captivate wont boot normaly and the only way to revive it is to go into recovery mode?
I'm pretty sure the official jh7 firmware update is supposed to fix that, it did for a lot of people. have you tried that?

Didn't try jh7

iakovl said:
Didn't try jh7
Click to expand...
Click to collapse
What are you currently running? Stock AT&T build seems to break the options to download/recover etc.. Not to mention for me it was causing random shutdowns, horrible GPS functionality, and was over all lagged and slow.
If you don't know what your doing though? I wouldn't recommend flashing to a different ROM as you could "semi-brick" your phone requiring a 1-click ODIN restore.

ROM manager is better, well for me at least.

right now i'm on stock, waiting for a good 2.2
using SuperOneClick v1.4 to root so i can use rom manager

[Q] Bricked phone after JI6/Odin

Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?

You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.

ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!

1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.

Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.

ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!

Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.

Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol

I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.

Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.

Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"

spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.

ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.

Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.

Bricked Rogers Samsung Captivate (i896)

silly me decided to install a custom battery icon. In the description for the mod on app planet it said to use with froyo but didnt say it would not work with eclair. I installed the mod without problems and I thought everything was going well, but now my phone is bricked, and wont load past the samsung i896 boot screen even after deleting all user data and wiping my cache in recovery mode. So I guess my only option now is to flash a rom using odin, but id rather prefer not to flash to a stock ATT 2.1 rom, i would like to flash back to my original stock rogers.
Is it possible to flash to an ATT rom, then do a factory reset from the privacy settings of the phone to bring me back to rogers stock rom?

ATT rom =/= Rogers rom
You'll need to search and find a Rogers rom you can stick in Odin and flash with if you want Rogers

I don't think you can easily return to Rogers stock rom using odin. Most people end up having AT&T logo on boot. However, since you're soft bricked anyways, why don't you try using Heimdall, new Open-Source Flashing Software and this dump generated from stock Rogers phone.
I haven't seen any reports of tests on Captivate yet, but it seems to work well on other Galaxies. Check Heimdall thread for more info, and if it works well for you, please report to this thread. Good luck!

thanks, i installed heimdall perfectly fine, it recognizes my device, but i cant download that PIT file from megaupload, its failed to download multiple times. Is there any other links?
I will keep trying

all good to go now,
used this rogers stock rom
http://www.megaupload.com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything

Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App

Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.

sshvetsov said:
Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.

nostratispeak said:
Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.
Click to expand...
Click to collapse
i used heimdall, which was linked above, but I was able to get into download mode through my phone since it was soft bricked. IF you can get back into Download mode, then you are fine... Keep trying until you do, otherwise you might have to use the JIG method.

stavs said:
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.
Click to expand...
Click to collapse
That's great news! I'm sure a lot of rogers captivate users will be very happy to learn that. Just curious, where did the linked rom dump come from?
EDIT: Nevermind, found this thread describing Rogers stock restore procedure using Heimdall and the bundle you used.

@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.

sshvetsov said:
@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.
Click to expand...
Click to collapse
Yup. Just did. The site is back up and working. I've the downloaded the files too. Now, to get my phone to work.

@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?

nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
Click to expand...
Click to collapse
Your device isn't bricked as such, it's caught in a boot-cycle. This is actually worse than a soft brick and in some ways is comparable to a "hard" brick. It's comparable to a hard brick because when you're in a boot cycle you usually can't get into download mode. Presumably the only option is to use a custom JIG, as you've mentioned.
There is no official terminology but a soft brick is generally when your phone displays the "connect phone to pc" screen. A hard brick is a bit more difficult to define, but I'd say it's fairly reasonable to assume that this is when your phone won't turn on or charge. A brick (full brick?) is when your device is absolutely not recoverable by any means.

nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?
Click to expand...
Click to collapse
thats great news than, now with the one of the downloaded roms you have saved on your computer, take the data (ie Factoryfs.rfs,cache.rfs, modem.bin and Zimage) and link it appropriately in the program. Then just click the start button and it will automatically install the rom within minutes. You shouldnt see anything pop up, i dont remember seeing anything, but during the installation there should be a download bar on your phone to indicate data is being transfered and downloaded to your phone. After your phone should reboot and be back to normal.

stavs said:
all good to go now,
used this rogers stock rom
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
Does this remove the AT&T boot logo and replace with the Rogers logo as well? Stavs, I'm assuming you went from the Rogers ROM, back to the Rogers ROM, so this probably not apply to you, but have any of you guys been able to get rid of the AT&T logo from a previous flash, and restore the Rogers logo using this method, and ROM?

stavs said:
all good to go now,
used this rogers stock rom
megaup*****com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
used the same rom flashed it with odin but didnt load the pit file... made sure re-partitioned was UNchecked and off i went... restored my phone to 2.1 and was finally able to get kies to recognize my phone and upgrade it after 5 days in hell trying various things, flashing different "stock" ROMs... i finally did it tho... running froyo as we speak...

I am not sure if anyone suggested this already but i896 users can flash stock Rogers 2.1 using this method. No AT&T screens. Works great.
http://forum.xda-developers.com/showthread.php?t=979133

[Q] Unrootable Captivate - Please Help

As you are about to see, I'm new to this.
I have been attempting to root my Captivate. I have tried Galaxy One Click Root and Super One Click 1.7, among others.
My phone won't enter recovery mode. I have tried to install z4root, which the phone blocks. I've tried using sideload wonder machine, which doesn't work either.
I downgraded to 2.1....nothing. Reloaded 2.2....nothing.
Any advice would be helpful at this point, and please be specific, as I am slightly retarded.

It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

ryanmahan said:
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
That's not a rumor, it's a fact. Does not happen with all models.

What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)

mrhaley30705 said:
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
Click to expand...
Click to collapse
As I said, I'm slightly retarded. Do you know of a forum with instructions for doing this? Everything else I've tried has just caused a face to appear on my phone's screen laughing at me.

When you use super one click, did you enable usb debugging?
Sent from a place my wife doesn't know about

The captivate is actually an extremely easy root process...
Download this file update.zip
Put it on your internal SD card (internal Memory) not your SD card you can remove
Turn off your phone
Once off hold both volume up and down and hold power until you see the AT&T boot screen then let go of all 3 buttons. You should see recovery mode soon. Select Reinstall Packages, congratulations you are now rooted.

Is that the modded cwm? I think he said he was on 2.2. Regular cwm won't work with froyo(signature verification errors). There is a modded one somewhere on this site that either replaces 3e, our fixed sig on cwm.
Sent from a place my wife doesn't know about

I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.

jayjr1105 said:
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
Click to expand...
Click to collapse
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.

use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.

you must not have the right drivers installed.
2.2 cannot be rooted by using an update.zip....you will need to get your drivers working and adb seeing the device....

sharp1114 said:
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
Click to expand...
Click to collapse
sounds like you need the 3button fix first. there is an odin stock rom+3button fix, it should take you to 2.1 but you will get recovery mode. if that fixes the recovery mode 3-button combo and the phone boots you can put the rom of your choice on the sd card, then odin flash speedmod kernel and flash the new rom, warning the phone doesn't boot a 2.1 rom with speedmod kernel, i only do this as a faster way to get into cwm recovery, only do that if you intend to flash a rooted rom from 2.1.

Dani897 said:
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.

all of the available roms are stable. to be honest TiBu will remove bloat if you want it to.
Try them all and see which one you like. Pretty much all of the custom roms are better than stock. If you like to stay near stock but run more optimized, see Cognition. Otherwise see which one you like more. It's not a hard process if you read up on it.

sharp1114 said:
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
Click to expand...
Click to collapse
it is hard to go wrong with cognition which is a stock rom with some mods and bloat removed and tethering enabled, that will have the proper kernel and modem for the captivate which for me has great call quality, also the disadvantages of not having hsupa are overblown.
there is also andromeda which is the rom from the armani captivate and is well polished and complete, has some of the more useful samsung apps. this can be used with a 2.2.1 kernel ported from the i9000 for a slight speed boost (shows in benchmarks, may not be detectable in user experience) this has hsupa and is designed for the captivate
i9000 ports are newer 2.2.1 versions and all of the features work now so you may want a newer firmware version from one of those..
there are many 2.2.1 i9000 roms that are fully functional. that is more a matter of feature set and theme preference it is hard to say one is better than the other. id say for stable the speedmod kernel is about the best on an i9000 port, for experimenting with overclock or undervolt i hear that the kernel with paragon is awesome.
now it is odd that you say you flashed a different version of 2.2 but cant get into recovery, was that in odin? can you get download without adb commands?

Dani897 said:
im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Use this method to flash back to stock. Supposed to be much safer that doesn't mess with the bootloader files. I have been using it for about 3 weeks now to flash back to stock. You CAN however still use the one click odin to master clear once you have flashed back to stock.
Back on topic... I would flash back to 2.1 using the above method and master clear to start fresh with this issue. Once that is done look for mobiletechvideo's 3 button fix video on youtube. But even if you have 3 button issues the Galaxy S one click root program should still get you into recovery. It doesn't always succeed in copying the update.zip file to the internal SD card but you can do that manually and just use the program solely to get into recovery. Make sure you have USB debugging on. After the stock flash and master clear it is off by default and samsung kies is on. You might want to invest in a Jig also since you have 3 button issues, it may save you hide someday.
As far as a good rom goes. Really all the 2.2.1 roms are pretty stable and fast. I'm currently using Continuum 4 with the paragon kernel and it floats and sips battery. If you like the stock look you can use cognition. If you like the green themed gingerbread look you can use Phoenix, Serendipity, Firefly, or Paragon which is my personal fav but hasn't been updated in a month.
Anyways good luck. I'm sure you'll figure it out.

oops, got double posted somehow

Thanks for all your advice and help. I finally got it rooted.
I've tried Cognition 4.3 and Paragon, both of which I liked. I like the appearance of Paragon, but the optimization just doesn't seem to be there. Cognition is great for customization, but I the appearance is just to 'stockish' for me, if that makes sense. Something in between would be nice. (Ideas?)
I plan to try Phoenix Unleashed, but i can't get it to download.

The reason why the programs are having a hard time seeing your cappy is because you need the Serial COM driver available only by installing Samsumg's software: Kies Mini... don't run the program just install it. Once you do this Odin and the Wonder Root program can see the phone. I had this issue.

[Q] How do I reboot after installing ClockworkMod?

I attempted to root my SGS (which had stock Gingerbread Value 2.3.6) using a guide on the Snappyguides blogspot page (the system won't let me, as a newbie, post the URL).
Odin did its thing and then the Samsung Galaxy screen came up (just the white lettering, not the multicoloured animated S) and then... nothing. It just stayed like that for about five seconds, then the white Samsung Galaxy S came up again, then the blank screen ad infinitum.
I can access the download screen and I can access the recovery screen (which does seem to indicate that ClockworkMod v2.5.1.0 has been installed). The trouble is that none of the options seem to do anything.
I have tried searching the forum for similar problems and have read the sticky. The only answers I seem to have been able to find so far suggest flashing a new Rom.
Before I go this far, is flashing a new Rom really necessary in this instance? I have never done this procedure before, so I'm wary of messing things up even further. But obviously if the phone is past the point of no return as far as the stock Rom is concerned, then that'll be what I have to do.
I'd appreciate some advice before doing anything else to my phone though.

I now seem to be able to get the recovery menu options to respond, so maybe all is not lost. Have set it to root and it's currently converting to EXT4 and is about halfway through that.
I'm hoping once that's done, it'll be bootable.
If not, what do I need to do to make the SGS boot again? Is there any way of getting back to stock or can I only flash a stock rom back on?

Nope, still not booting. It just keeps going to the Samsung I9000 white lettering, stays there for five seconds, goes blank for five seconds, then the white lettering goes back and on, off like that forever.
So... anyone willing to help?

...

have a look in this thread http://forum.xda-developers.com/showthread.php?t=1225879

Lexrsk said:
have a look in this thread http://forum.xda-developers.com/showthread.php?t=1225879
Click to expand...
Click to collapse
Thanks for responding.
Sorry for being a n00b but I can't find anything in there that helps me. All I see is a lot of jargon about various roms, kernels and something called Voodoo.
I had a working phone with Gingerbread 2.3.6 Value. I added Clockworkmod via Odin. Now I can't get the phone to boot beyond the splash screen. It doesn't even get as far as the animated S, all I get is the splash screen going on and off every few seconds.
All I want is to get my phone working again, I really couldn't care less about custom roms etc.
If anyone can help this poor n00b, I'd be very grateful!
Incidentally, I've downloaded what I understand to be the factory rom for JW4 from sammobile.com - this is a 171MB zip file with just two files inside - a tar file called JW4_JW5_JW4 and a dll file called SS_DL.dll. I'm not really sure what to do with these to restore my phone via Odin. This is the kind of thing I need help with - the threads I've read so far don't make much sense to a poor confused n00b I'm afraid.

evilcartman2 said:
Thanks for responding.
Sorry for being a n00b but I can't find anything in there that helps me. All I see is a lot of jargon about various roms, kernels and something called Voodoo.
I had a working phone with Gingerbread 2.3.6 Value. I added Clockworkmod via Odin. Now I can't get the phone to boot beyond the splash screen. It doesn't even get as far as the animated S, all I get is the splash screen going on and off every few seconds.
All I want is to get my phone working again, I really couldn't care less about custom roms etc.
If anyone can help this poor n00b, I'd be very grateful!
Incidentally, I've downloaded what I understand to be the factory rom for JW4 from sammobile.com - this is a 171MB zip file with just two files inside - a tar file called JW4_JW5_JW4 and a dll file called SS_DL.dll. I'm not really sure what to do with these to restore my phone via Odin. This is the kind of thing I need help with - the threads I've read so far don't make much sense to a poor confused n00b I'm afraid.
Click to expand...
Click to collapse
I'll help u, I went through this when I was a noob and because I didn't know about xda I had to just figure a way out, I am sorry to say but u have soft bricked your phone, luckily its not hard to unbrick, here's a link to a post i made the other day with proper guides that I use often and they are noob friendly, the files u need to download are there but it 2.3.3 and it JW4 but it will be a start to get ur phone back to life,
If you like my posts hit thanks

Here the link http://forum.xda-developers.com/showthread.php?p=25572245
If you like my posts hit thanks

OK, thanks for that. I'm supposed to be asleep right now, so I'll come back to this later but thanks for helping.
But just to clarify for now - this will restore the phone to a working version of 2.3.3 and from there I can get back to the latest stock rom (2.3.6) via Kies, yes? I need to get into Kies anyway to restore my contacts from backups (as I haven't yet seen a way of restoring the backups except via Kies).
Thanks once again.

evilcartman2 said:
OK, thanks for that. I'm supposed to be asleep right now, so I'll come back to this later but thanks for helping.
But just to clarify for now - this will restore the phone to a working version of 2.3.3 and from there I can get back to the latest stock rom (2.3.6) via Kies, yes? I need to get into Kies anyway to restore my contacts from backups (as I haven't yet seen a way of restoring the backups except via Kies).
Thanks once again.
Click to expand...
Click to collapse
Yip I guess that is right. I have never tried it but yes it should work
If you like my posts hit thanks

Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?

evilcartman2 said:
Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?
Click to expand...
Click to collapse
Yeah that or the wrong root file for ur baseband
If you like my posts hit thanks

evilcartman2 said:
Well, I did get it working again in the end by using a factory rom. Thanks for your help anyway, W1nst0n.
I do intend to attempt to root it again but this time I intend to do it properly.
Any suggestions on what may have caused the boot problem I had? Perhaps using a version of ClockworkMod that was incompatible with 2.3.6 Value?
Click to expand...
Click to collapse
Check in about phone for the kernel version. for example mine is 2.6.35.7-I9000TDVJV6-CL530973
The important part is the bold text.
search the link that i posted earlier for a odin version and flash as PDA
Good luck

Evilcartman, when u wanna get me help find me on the I9000 q&a-ask me anything I got the answer thread, it where I spend most of my time.
If you like my posts hit thanks