Database Develop

My xperia doesn't take the charge!

Hey, dunno if some one had the same problem but my xperia doesn't take the charge.
Its appened when the mobile has terminated all his battery, and know the charge is not accepted by the phone
help me please

Something perhaps similar happened to me, i ran my battery completely flat and then could not switch the phone on even when it was on the charger. So I left it on the charger for ~1 hour and then it switched on fine! The other possibility is that you battery is dead. Hope this helps!

Its not the first time its appened to me, and the first time i had the problem i try a lot of time to recharge it, take out the battery, replace it etc.. and its worked.
But in 2 days, my phone is off :/
My battery is not dead i know, but how to recharge it

I have 2 computers from which I load it with usb cable. For some reason Mac Pro doesn't load the damn phone but Macbook does.
Try switching your "power" source. And sometimes when the battery goes really flat it needs many hours to even boot when loading up. One time I really thought the damn thing was dead for sure... But it came back to life
When you press the power button there's a red light next to volume buttons indicating it doesn't have enough power yet to boot up. If there's no red light then it's not charging at all.

thD64 said:
Hey, dunno if some one had the same problem but my xperia doesn't take the charge.
Its appened when the mobile has terminated all his battery, and know the charge is not accepted by the phone
help me please
Click to expand...
Click to collapse
Just leave if plugged-in and it will charge. It takes some time before it will charge if it is fully drained.

Ok thanks for reply
Have no real solution, but have the red light near to the volume button, or in the top of the phone.
But the phone doesn't take the charge at all...
The red light gave the battery charge, only that... have it sometimes and sometimes havent it...
Help me please
2 day less my phone know..

Ok i dunno why but the phone weak UP !
NICE
Ir was connected to the cpu and i presszs the button and it weak up
omg this phone

(Sort of) got it.
I'm not really an xda developer but id do have an xperia.
The same problem occured to my device about three weeks ago. I've noticed that the phone would still charge in the computer, but not by the power net adapter. (it must be broke i guess)
Today i've locked myself out calling the battery flat. I couldnt get it on anymore. After a lot of hassle this was the solution for me:
1) Connect the phone to a computer. Don't try to turn it on! Leave it there for about 15 minutes.
2) Disconnect the phone and pull out the battery.
3) Hold down the "on" button while inserting the battery back.
-- It should turn on now
4) Release the on button and quickly connect it to your computer again.
Hope this helps.

I just remember the red led lit on at the on/off button and the red light disappeared after 5 mins or so and i left for breakfast while it was still in the charger and by the time im back from breakfast, it turned itself on and was charging up

[Q] Nook won't boot - "Battery too low to power ON"

I recently installed CM7 nightly 12 and it's stuck at this screen. I'm using the stock charger. I've tried plugging it into my computer too.. no luck. Is there anything else to try? Am I screwed?

this sounds like something that was happening to me yesterday. i finally got it to charge by making sure it was completely off. i finally realized that even though the screen was dark it wasn't off, so it never charged (i think it was just recycling the charge enough to keep it on). if you look at it in a dark enough light you can see the screen is still on (backlit).
so plug it in, i would suggest using the wall charger. this usually makes it turn on (at least mine did), once it does, hold the power button until its off, no backlight is on. hope this makes sense and helps out a little

There's many others having this problem (me, on my friends nook, one of them). Hold down the Power button for a long period of time (I heard it's 10 seconds, but someone said they had to hold it for 30) and it will do a hard reset. At that point, try to turn it on again normally. If it doesn't turn on normally, plug it in (using the uSB cable that came with it (that is very important) and into the wall with the provided adapter), wait 30 minutes, and try again. It seems that very few (I don't know if i've actually read of any) who had this problem actually had to return the nook. When it happened to me with my bro-in-laws, he just hed the power button cause he was mad and it turned on, it hasn't happened to him since

Finally started working. I tried holding the power down for awhile with no luck.. Left it charging overnight and tried holding power again and it worked!

won't turn on/can't select any boot options

I have a new Motorola Atrix HD. I was using it and the screen went black. i hit the power button to unlock but nothing happened. i plugged it in but nothing happened. i took the back off to see if the battery was disconnected. I didn't know the battery was different than other phones and ripped the power cord connecting the battery to the phone when i took it out. lesson learned. Ordered a new battery and installed correctly. phone won't turn on. The green charge light blinks when i plug it into the wall and then stays on for about 20 seconds and then the phone tries to turn on but while the motorola icon is illuminated, it cuts back out and repeats the cycle. I left it plugged in for a couple hours and still the same thing. i tried holding in power and volume buttons for the boot screen. if i do that just as the phone attempts to turn on i can get the screen up and scroll the list of boot options with the power buttons but i can't select any of them and the phone cuts out after the same amount of time. Everytime. When i plug it into my laptop, the light blinks on and then stays on like with the wall, but the phone doesn't attempt to power up. Please, any help would be greatly appreciated. i have read a lot of forums where the battery was acting up because of the chargers people were using. The difference between my situation and those of the people i read about is that my boot screen cuts out and cannot be used. This all happened 2 days after my exchange period ended and because i took the back off myself, best buy won't have anything to do with me so i'm on my own and cannot afford another phone right now. Thanks in advance for your time and concern.

katlic said:
I have a new Motorola Atrix HD. I was using it and the screen went black. i hit the power button to unlock but nothing happened. i plugged it in but nothing happened. i took the back off to see if the battery was disconnected. I didn't know the battery was different than other phones and ripped the power cord connecting the battery to the phone when i took it out. lesson learned. Ordered a new battery and installed correctly. phone won't turn on. The green charge light blinks when i plug it into the wall and then stays on for about 20 seconds and then the phone tries to turn on but while the motorola icon is illuminated, it cuts back out and repeats the cycle. I left it plugged in for a couple hours and still the same thing. i tried holding in power and volume buttons for the boot screen. if i do that just as the phone attempts to turn on i can get the screen up and scroll the list of boot options with the power buttons but i can't select any of them and the phone cuts out after the same amount of time. Everytime. When i plug it into my laptop, the light blinks on and then stays on like with the wall, but the phone doesn't attempt to power up. Please, any help would be greatly appreciated. i have read a lot of forums where the battery was acting up because of the chargers people were using. The difference between my situation and those of the people i read about is that my boot screen cuts out and cannot be used. This all happened 2 days after my exchange period ended and because i took the back off myself, best buy won't have anything to do with me so i'm on my own and cannot afford another phone right now. Thanks in advance for your time and concern.
Click to expand...
Click to collapse
Is it possible that the that connection between the power cord and the phone itself is loose or damaged? I'm just guessing here as I have never opened up the back of my phone.

I would check your battery terminals then leave it to charge if it does. You could also try a factory cable. Another thing would be to try fastboot while connected to your laptop and see if it stays on, and if it does, try reflashing all partitions.
Sent from my MB886 using xda premium

[Q] [Help Thread] Nook HD not booting at all

I recently went on a 3 month trip. Before I left, my nook was working perfectly fine, when i got back, it didn't work at all. It's not dead because i left it plugged in overnight but it still didn't turn on. when i plug it in the LED goes from orange to green and then off (or green to orange, i can't remember). The screen doesn't turn on at all. I can't get to recovery either.
This is a Nook HD, I believe it had CM11.
:crying:
Can this be fixed
or should i plan it's funeral

Same here
The same has happened to me. Screen doesn't turn on, but there is power, I can play it into my laptop and something is there, just not enough.
Good excuse for a new tablet!

It can be fixed. I've done it before. It has to do with the fstrim not being compatible with certain hardware versions of our device. If I can remember how I fixed it, I'll post it here. Trying to fix mine (again).

tambourineman86 said:
It can be fixed. I've done it before. It has to do with the fstrim not being compatible with certain hardware versions of our device. If I can remember how I fixed it, I'll post it here. Trying to fix mine (again).
Click to expand...
Click to collapse
If would be fab if you could fix. Seems to be a common issue

I was able to fix it. YMMV.
1) Make sure the Nook is completely off and unplugged
2) Take out your sdcard
3) Hold down power button until the "battery depleted" icon shows, then promptly plug in the power before the icon disappears.
4) Let it set. The screen will go black, then it will attempt to boot and get stuck on the faint black screen, but this time, the charging light should stay amber.
If you want to be safe, wait until the device reboots itself. That could take hours though. If you're plugged into the wall wait at least 30 - 45 minutes before holding the power button down til it shuts down and then rebooting it (with the sdcard inserted).
Good luck, I hope it works for you.
EDIT: Also, I've read this may also have to do with wifi sending the device into some sort of strange bootloop when the screen is off. I personally believe it has more to do with the fstrim of JB but perhaps changing the wifi sleep policy may prevent this issue from happening again. I'm skeptical, but figured I'd pass that info along if anyone wants to try it as well.

tambourineman86 said:
I was able to fix it. YMMV.
1) Make sure the Nook is completely off and unplugged
2) Take out your sdcard
3) Hold down power button until the "battery depleted" icon shows, then promptly plug in the power before the icon disappears.
4) Let it set. The screen will go black, then it will attempt to boot and get stuck on the faint black screen, but this time, the charging light should stay amber.
If you want to be safe, wait until the device reboots itself. That could take hours though. If you're plugged into the wall wait at least 30 - 45 minutes before holding the power button down til it shuts down and then rebooting it (with the sdcard inserted).
Good luck, I hope it works for you.
EDIT: Also, I've read this may also have to do with wifi sending the device into some sort of strange bootloop when the screen is off. I personally believe it has more to do with the fstrim of JB but perhaps changing the wifi sleep policy may prevent this issue from happening again. I'm skeptical, but figured I'd pass that info along if anyone wants to try it as well.
Click to expand...
Click to collapse
Not sure we have the same problem. My screen doesn't come on at all, I don't get a battery depleted icon, no matter how long I hold in the power button. The only sign of life I get is when it's plugged in, when it goes from orange to green after about 10 seconds.
Thanks for the help, but I think it's a lost cause.

YMMV. But mine was the same issue. You should be able to get the icon by holding the power button down for 5 or 6 seconds. I'd say just eff with it until that icon appears. Try different button combinations. I used power and home trying to get the icon to show.

developerbuzz said:
when it goes from orange to green after about 10 seconds.
Thanks for the help, but I think it's a lost cause.
Click to expand...
Click to collapse
Anyway... since people are continually running into this kind of issue...
Give or take 21 seconds after turning orange it turns green during actual boot cycle into rom
Give or take 10 seconds after turning orange is cwm internal recovery.
After about 10 seconds the charging screen image disappears.
The charging screen image once finally no longer may not show up again until full power off/on (holding power button > 10 seconds or full battery discharge). Unplugging and plugging back in does nothing except making the device look bricked if there's too much light shining on it.
Device may not automatically leave the above state under a specific situation(s). May still need manual full power off/on.
Guessing 10 seconds could also be something else during the early/late boot process or other. The light changing color though should indicate that something is indeed happening.
Light should stay green during the boot process if its completely and fully no questions asked 100%. If you go based on that than yours doesn't appear to be completely fully charged which should either mean its turning on and using battery or not charging correctly.
The light turning off is curious. The device could be shutting off. If light comes back on a moment later then the device has rebooted. if the light stays off = n/a.
If its booting into recovery then the device would be available via adb. At that point it could be further evaluated.
On the off chance the screen was damaged it should boot and usb should be available via computer as well as adb.
If not then its probably toast unless its simply not getting a good enough current causing mislead battery stats and/or not enough energy to get to charging screen (bad wall power adapter in use, damaged power cable - though could be bad battery, defect, damage or whatever). OR there's some major error on behalf of the user happening (think should have tried that in the morning not while 1/2 asleep or came home from long trip and forget how that works).
Maybe the only other things are the emmc brick bug, was left sitting in the sun or heat or ocean air or other physical damage/defect even to the power port as well.
Or maybe it was mad that you left it. Shouldn't have hurt its feelings you know. At least its not crying battery acid on you.
That should just about cover everything except for the things not mentioned. Since its your device, you decide what happened.
Its complicated so anyone see any improvements, clarifications, or mistakes? Please put it in a post.

Jsorren said:
when i plug it in the LED goes from orange to green and then off (or green to orange, i can't remember). The screen doesn't turn on at all.
Click to expand...
Click to collapse
Bumping this thread to make it aware that there is a real answer. I have been able to duplicate this problem and rather easily too.
The problem is indeed from bad power. The device isn't receiving the correct amount of power needed to charge and start from a fully discharged battery.
To safely* duplicate this you can use a usb extension that isn't fully connected to the nook power cable. You may need to fully connect it first then slowly disconnect/connect till the light turns green when it should actually be charging. It won't actually charge in this state, or if it is, its very little and the battery percentage will continue to drop.
Leave the cable as is and unplugged. After the tablet is fully discharged, connect the usb cable. The light will change through the modes and turn off. The device will not turn on.
There are probably other ways to cause the problem like for instance a portable usb battery that doesn't put out enough juice (not the orange kind). Etc.
* It didn't hurt mine, but not my fault if it breaks your device.

sandsofmyst said:
Bumping this thread to make it aware that there is a real answer. I have been able to duplicate this problem and rather easily too.
The problem is indeed from bad power. The device isn't receiving the correct amount of power needed to charge and start from a fully discharged battery.
To safely* duplicate this you can use a usb extension that isn't fully connected to the nook power cable. You may need to fully connect it first then slowly disconnect/connect till the light turns green when it should actually be charging. It won't actually charge in this state, or if it is, its very little and the battery percentage will continue to drop.
Leave the cable as is and unplugged. After the tablet is fully discharged, connect the usb cable. The light will change through the modes and turn off. The device will not turn on.
There are probably other ways to cause the problem like for instance a portable usb battery that doesn't put out enough juice (not the orange kind). Etc.
* It didn't hurt mine, but not my fault if it breaks your device.
Click to expand...
Click to collapse
I actually ended up fixing it yesterday!! I haven't touched it in about 3 months, and I was planning on just throwing it out getting rid of it some how. For the heck of it, I decided to plug it in, assuming that it was gonna go through the same process. But this time it went from green to amber, but it never went off. So I pressed the power button and the battery icon appeared. This was a really good sign. So I left plugged in for about 5 to 10 minutes then tried to power on.:fingers-crossed: As soon as I saw that '' Nook" boot up screen, my heart stopped. It booted up perfectly and I almost blew up from excitement :victory:. So I then flashed the stock firmware back onto it, so this would never happen again.
I guess the battery had to be completely depleted or just had to cool down. Idk but either way this was one heck of a miracle
So I recommend for anyone having this problem to just leave it off and don't mess with it. I wouldn't say for 3 months like I did but maybe test it each week or wait a month if you have good patience

Wow. Man, that's awesome! Glad you posted that update on it. Thought if you had posted an update it would be the opposite as in trashed it
Actually, I guess only you could answer if you had also moved/unplugged the power cable from the wall adapter or put it into a different wall adapter, etc. Thinking there could have been a difference there.
These modern day devices are so finicky, guess anything is possible. Like you say, maybe sitting without power is another answer.

From some experimentation I have etermined that your power adapter (that plugs into the outlet) is the issue. It does not like to be leaft plugged in indefinately. It will continually use power even when the nook is not plugged in.
Also, if you use a differnt adapter you will have the same problem unless it is also of the exact same voltage and amps.

OP3T dead - not turning on and not charging

Hi guys, I have a huge problem.
Currently I'm on vacation in Croatia, where it's around 38-40 C every day. One day I had to log into an unsecured wi-fi. I know, i shouldn't have done that but it was urgent. Well, the same night (while charging) my phone turned off itself and I had to turn it back on on the next day. It worked the whole day until I opened the camera. Suddenly the phone went off and I wasn't able to turn it on. At first I thought the battery has drained so I plugged it into the original OP charger (dash). It gets warm while charging, but the LED is not turning on. After an hour of charging I still can't turn the phone on. Not even after a charging over night. There's also no vibration after holding the power button, neither holding the power-button for 20 (or more) seconds . I can't even get into recovery mode by holding volume-down and power.
I'm on original Resurrection Rom.
Is there anything else I could try? Could it be that some hardware is damaged (overheated)?
Since I'm on vacation there's currently no way for me to do any kind of unbricking until I find some phone-repair service.

I'm not a pro, but Im pretty sure the problem occur on the hardware side since the phone is not taking the charge and no vibration
I once had an Android phone (not 3t), the same thing occured, the phone I had had some hardware damage near the battery so I experienced the same problems you listed, ended up getting a new phone

Overheating is probably not the issue, at least not the 40C air temps you mentioned. These devices can probably something like 60C (internal temp at CPU or battery) before seeing any damage. Lot of folks live where it's just as hot as where you are, if not hotter. So I have to think the device is designed to work under such conditions.
Try holding the power button longer (a minute or more). I don't know about this device. But on my old HTC M8, there were instances where the phone powered off by itself. And the power button needed to be held over a minute, to make it boot. Although no charge LED is concerning.

Mine did the same a few days ago, was tethering and the phone just shut off. Buttons didn't work, no vibration, no charge LED, no anything. Thought it died but after plugging it into a PC it was detected as QHSUSB_BULK (hardbrick).
But it turned on normally after a minute lol.

Hallo. Mine also crashed. I was in the sunset playing game and taking pictures. Then phone suddenly got so warm and lagged, It turned off itself. No reaction. I connected into charger and then turned on hopefully. I think you must take care, because it has metal body and easy heating, and when heating it's lagging and not works good
My opinion is that it's overheat problem

BTslo said:
Thought it died but after plugging it into a PC it was detected as QHSUSB_BULK (hardbrick).
Click to expand...
Click to collapse
You will see Qualcomm download mode message (QHSUSB_BULK) whenever the device is powered off. It needs to be powered on, at least to bootloader (or recovery or OS) for the PC to connect in any other way.

Update
After 3 days, it finally turns on and charges as expected. Don't know if it has to do anything with it, but i let it in the charger for 1 day.
but now another problem occured.
every time I press the homebutton the phone crashes and goes off. this only happenes if the fingerprintscanner is not requested.
i.e. unlocking phone with fingerprint, does not crash, but... pressimg homebutton to go back to home screen crashes.