Database Develop

[DEV] LG P500 Sourcecode Release!

http://www.lg.com/global/support/opensource/opensource-detail.jsp
type LGP500

This will go nicely with the Gingerbread 2.3 SDK just released... I am done deving for the night though... too much of a headache.

Correct link is:
http://www.lg.com/global/support/opensource/opensource-detail.jsp?detailCustomerModelCode=LGP500

this is an original rom who can be flashed on phone?

What is the password of the zip file? thanks

fsangio said:
What is the password of the zip file? thanks
Click to expand...
Click to collapse
No pass and it's *.tar

Build instructions :
1. Android buid
- Download original android source code (froyo) from http://source.android.com
- Untar opensource packages of Thunder_Froyo.tar.gz into downloaded android source directory
- And, merge the source into the android source code(froyo)
- Run following scripts to build android
a) . ./build/envsetup.sh
b) choosecombo 1 1 generic 3
c) make -j4
- When you compile the android source code, you have to add google original prebuilt source(toolchain)
into the android folder
- After build, you can find output at out/target/product/generic
2. Kernel Build
- Untar using follwwing command at the android folder
tar zxvf Thunderg_Kernel.tar.gz
- cd Kernel
- make thunderg-perf_defconfig
- make zImage -j4
3. After Build, You Can find the build image at arch/arm/boot
4. Compile environment
- gcc 4.4.1
- Ubuntu 9.10
Click to expand...
Click to collapse

Has anybody been able to build it successfully ???
I've tried it (following the README steps)...but it does not built.
Here I paste a chunk of the prompted errors:
Code:
target thumb C: liblgdrmwbxml <= device/lge/cappucino/modules/liblgdrm/WBXmllib/wbxml_tree_clb_wbxml.c
target thumb C: liblgdrmwbxml <= device/lge/cappucino/modules/liblgdrm/WBXmllib/wbxml_tree_clb_xml.c
make: *** No rule to make target `out/target/product/generic/obj/STATIC_LIBRARIES/liblgdrmexpat_intermediates/liblgdrmexpat.a', needed by `out/target/product/generic/obj/SHARED_LIBRARIES/liblgdrmwbxml_intermediates/LINKED/liblgdrmwbxml.so'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C: liblgdrmport <= device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c: In function 'drmLibFsOpen':
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2108: error: 'AID_LGDRM' undeclared (first use in this function)
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2108: error: (Each undeclared identifier is reported only once
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2108: error: for each function it appears in.)
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2108: error: 'AID_LGDRM_ACC' undeclared (first use in this function)
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c: In function 'drmLibFsCreateDir':
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2861: error: 'AID_LGDRM' undeclared (first use in this function)
device/lge/cappucino/modules/liblgdrm/Adapt/Source/DRM_Port_Linux.c:2861: error: 'AID_LGDRM_ACC' undeclared (first use in this function)
make: *** [out/target/product/generic/obj/STATIC_LIBRARIES/liblgdrmport_intermediates/Adapt/Source/DRM_Port_Linux.o] Error 1
[email protected]:~/droidP509$
My environment is:
- java -version : java version "1.5.0_19" (I've tried with java 1.6 and it doesn't built either)
- gcc --version: gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
- Ubuntu 10.10 (64 bits)
Any suggestion??? What could be failing?? I'm completely stuck :/
Note: I'm able to build the straight android code (without the P500/9 patch)
Thanks in advanced!!

Hello,
How can I merge lg source with google source?

Sorry,
how can I apply lg patch to android source code?
I have downloaded the source with repo
repo init -u git://android.git.kernel.org/platform/manifest.git
repo init -u git://android.git.kernel.org/platform/manifest.git -b froyo
and now? How can I merge lg patch with android froyo source?

I have the source code for p509. how do I install it?

maybe we can resolve the cpu lag when the touch screen is pressed?

cozydroid said:
Any suggestion??? What could be failing?? I'm completely stuck :/
Click to expand...
Click to collapse
It failed to build liblgdrmwbxml because liblgdrmexpat.a is missing. You can either ask LG for liblgdrmexpat.a or grab a copy of liblgdrmwbxml.so from your phone (it's in /system/lib/).

jtaylor63 said:
It failed to build liblgdrmwbxml because liblgdrmexpat.a is missing. You can either ask LG for liblgdrmexpat.a or grab a copy of liblgdrmwbxml.so from your phone (it's in /system/lib/).
Click to expand...
Click to collapse
and after that what should i do to make the whole think compile ?

jtaylor63 said:
It failed to build liblgdrmwbxml because liblgdrmexpat.a is missing. You can either ask LG for liblgdrmexpat.a or grab a copy of liblgdrmwbxml.so from your phone (it's in /system/lib/).
Click to expand...
Click to collapse
and after that what should i do to make the whole think build ?

Januka said:
and after that what should i do to make the whole think build ?
Click to expand...
Click to collapse
. ./build/envsetup.sh
choosecombo 1 1 generic 3
make -j4

irondevil said:
. ./build/envsetup.sh
choosecombo 1 1 generic 3
make -j4
Click to expand...
Click to collapse
this i know, but i mean what shall i do with liblgdrmwbxml.so
I already built the source without the lg code, how can i build it also after merging it?

p500 2.2.2 sources?

DookMatt said:
p500 2.2.2 sources?
Click to expand...
Click to collapse
froyo 2.2 sources but i think there aren't many differents

irondevil said:
froyo 2.2 sources but i think there aren't many differents
Click to expand...
Click to collapse
2.2 kernel and 2.2.2 kernel are different!

Kernel Compiling Help

Hello, I am trying to compile a stock KK4 kernel from source (obtained from the Samsung open source website), and I'm running into some errors. I downloaded the latest toolchain from Codesourcery and edited the makefile's cross compile to point to its installed directory. But when I get to this step,
$ cd kernel
$ make kepler_rev02_defconfig
$ make
Click to expand...
Click to collapse
Trying the first make gets me this error, and a similar one for the second make.
make: *** No rule to make target `defconfig'. Stop.
Click to expand...
Click to collapse
I have searched everywhere and nothing seems to be relevant. Can somebody point me in the right direction?

It looks like you are missing the makefile for deconfig, as far as a direction to point, you can try one of these great kernel devs on the board, they might be able to help you.

crt60 said:
It looks like you are missing the makefile for deconfig
Click to expand...
Click to collapse
It does that when you try to make the whole thing too though...

[DEV][KERNEL] How to enable menuconfig in duos kernel development

long story short. there are some missing files from duos kernel source. the "make menuconfig" won't work even if you have installed ncurses libs. this files is the missing files required to enable menuconfig. simply put all the content into /script/kconfig.
http://www.mediafire.com/download.php?y9z26eqpu8bzd0t
enjoy.
EDIT: a lil gift for sgy duos user. this is a kernel for duos
http://d-h.st/hfZ
rename it to boot.img then install it as usual. I made this kernel just to test the source code. the feature is same with kuro kernel in sgy dev forum. since its just a test stuff there won't be any update for this kernel. credit goes to sgyd12, nitubhaskar, for being the tester for this kernel and manorajan2050 for the ramdisk file.

kurotsugi said:
long story short. there are some missing files from duos kernel source. the "make menuconfig" won't work even if you have installed ncurses libs. this files is the missing files required to enable menuconfig. simply put all the content into /script/kconfig.
enjoy.
Click to expand...
Click to collapse
Woow... Great.. :good:
Thanks bro...
This will helpfully in the development of the kernel..
But i don't understand how to make new kernel..

Thanks this helps.. for once I can see how menu config looks at least..
hit thanks button for help! YOU hit if I helped.. I will hit if you helped!
Sent from my GT-S6102

Thanks for that bro!

So everyone not use menuconfig to build duos kernel mmm awesome coz its hard to me

savie said:
So everyone not use menuconfig to build duos kernel mmm awesome coz its hard to me
Click to expand...
Click to collapse
Well i used to make changes in sgy kernel using menuconfig and then compare the config files of sgy and sgyd. I added the changed things in sgyd config

savie said:
So everyone not use menuconfig to build duos kernel mmm awesome coz its hard to me
Click to expand...
Click to collapse
Yup.. if i didnt understand something i was using make config and use "?" For that particular option.. after reading ctrl+c.. now I have to understand how to config nurses 5.9 so that I can try this...
hit thanks button for help! YOU hit if I helped.. I will hit if you helped!
Sent from my GT-S6102

can anybody provide a mirror?

Some Fix
Today i installed ubuntu(VM Image) in my Mac-Pc
When i Try make menuconfig Found This Error
Code:
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
if Any One Get This Type Error Its Normal......
Just install ncurses (no need to install all package )
Install Command
Code:
sudo apt-get install libncurses5-dev
if u log-in in Root
Code:
apt-get install libncurses5-dev
Hope This useful For All My Friend.................:good::good:

manoranjan2050 said:
Today i installed ubuntu(VM Image) in my Mac-Pc
When i Try make menuconfig Found This Error
Code:
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
if Any One Get This Type Error Its Normal......
Just install ncurses (no need to install all package )
Install Command
Code:
sudo apt-get install libncurses5-dev
if u log-in in Root
Code:
apt-get install libncurses5-dev
Hope This useful For All My Friend.................:good::good:
Click to expand...
Click to collapse
I knew this.. read somewhere and had file before I started with kernel.. but it seemed it was not needed as our menu problem..
You are a bit late friend.. I mean thanks really.. but if only you had posted this before... because I downloaded ncurses-5.9.tar.gz file then tried manually.. and it was a headache.. ./configure.. make or make install make sources.. tried these but got errors.. then did sudo apt-get install ncurses.. it said no such repo package found.. then i bugged savie and kurotsugi for help
Kurotsugi helped me yesterday and installed it.. now you also helped others..
hit thanks button! If above post helps you..

Thanks very much for that

[Q] Kernel compiling

Hello everyone, I'm a noob that want try to learn something more about Android.
I'm trying to compile the Optimus-prime kernel of Demetris, but I'm stuck on an error during compile session.
My steps:
1) git init -u git://github.com/Ntemis/lge-kernel-p880
2) downloaded NDK from google http://dl.google.com/android/ndk/android-ndk-r9c-linux-x86.tar.bz2
(I'm using Slackware 14.1 32 bit)
3) I've used as baseconfig this one : cyanogenmod_x3_defconfig
4) then as toolchain :
Code:
export CROSS_COMPILE=~/ndk/toolchains/arm-linux-androideabi-4.6/prebuilt/linux-x86/bin/arm-linux-androideabi-
5)finally I did
Code:
make -j2 ARCH=arm SUBARCH=arm
Now the error:
Code:
CC arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.o
arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.c:58:27: fatal error: board-lge-nfc.h: No such file or directory
compilation terminated.
make[2]: *** [arch/arm/mach-tegra/lge/x3/board-x3-i2c-dev.o] Errore 1
make[1]: *** [arch/arm/mach-tegra/lge/x3] Errore 2
make: *** [arch/arm/mach-tegra] Errore 2
The include file board-lge-nfc.h is present in the same folder of board-x3-i2c-dev.c
Where is the error?

are you sure the cross compile path points to the correct directory?
try using doomlord toolchain, kernel compiling is quite tricky and most toolchains give errors
Poi se vuoi se ne parla in pvt

Rudjgaard said:
are you sure the cross compile path points to the correct directory?
try using doomlord toolchain, kernel compiling is quite tricky and most toolchains give errors
Poi se vuoi se ne parla in pvt
Click to expand...
Click to collapse
Hi,
I have only the official NDK on my machine. Anyway I'll try also that doomlord toolchain
Thx for the hint. :good:

I've tried DoomLord's toolchain,but I have the same problem.
So I've tried to download Iodak's sources and I'm been able to compile it without any problem.
Is there a problem with Optimus Prime sources?Is there some special trick?

Well, I've found a solution....
It looks like there is some problem with include path.I've moved the "board-lge-nfc.h" file inside the include folder in the main root of the kernel sources and it worked.
Now I'm stuck with tspdrv. Same story: missing files when they are there instead. I did the same trick with another include file and it worked again, but now I have other missing files.
I'm sure there is something wrong in my setup/sources ...

bilbo75 said:
Well, I've found a solution....
It looks like there is some problem with include path.I've moved the "board-lge-nfc.h" file inside the include folder in the main root of the kernel sources and it worked.
Now I'm stuck with tspdrv. Same story: missing files when they are there instead. I did the same trick with another include file and it worked again, but now I have other missing files.
I'm sure there is something wrong in my setup/sources ...
Click to expand...
Click to collapse
Simply just cherry-pick this commit and you'll be fine
https://github.com/laufersteppenwolf/lge-kernel-p880/commit/c2e57252398ded9520beb9382f538da53f9a0199

I think this will help you
https://github.com/iodak/LG_X3_P880_v20a/commit/6f2086454d537c6f49038f36d6eeddbe4adcd70a
Also look at other commits on this page when you get into problems.
https://github.com/iodak/LG_X3_P880_v20a/commits/master?page=9
Sent from my LG-P880 using xda app-developers app

Wow! Thanks you very much for your help guys! :highfive:
Now I have to study cherry-picking

bilbo75 said:
Wow! Thanks you very much for your help guys! :highfive:
Now I have to study cherry-picking
Click to expand...
Click to collapse
One of the best ( if not the best) git(hub) tuts on xda: http://forum.xda-developers.com/showthread.php?t=1877040
everything's covered, and even git noobs ( such as I am ) can easily understand it

You have to:
git fetch https://iodak/LG_X3_P880_20a
Then wait for a while
Then git cherry-pick 6f2086454d537c6f49038f36d6eeddbe4adcd70a
Commit that you want.
Sent from my LG-P880 using xda app-developers app

I'm amazed from your kindness guys!
A big thanks again! :victory:

CM11 Kenel compiling trouble !!

Hi. i have tried to compile cm11 kernel by using kernel source from http://github.com/cm-nokia-x2 and gcc toolchain 4.8 from here http://github.com/huyparody/gcc_linaro
i get config.gz from /proc/
and renamed it to ara_defconfig
and when i:
make ara_defconfig
make
after a few minute, it show me a error:
CC drivers/input/touchscreen/cyttsp4_device_access.o
drivers/input/touchscreen/cyttsp4_device_access.c: In function 'cyttsp4_grpdata_store_touch_params':
drivers/input/touchscreen/cyttsp4_device_access.c:1447:19: warning: 'rc3' may be used uninitialized in this function [-Wuninitialized]
error, forbidden warning: cyttsp4_device_access.c:1447
make[3]: *** [drivers/input/touchscreen/cyttsp4_device_access.o] Error 1
make[2]: *** [drivers/input/touchscreen] Error 2
make[1]: *** [drivers/input] Error 2
make: *** [drivers] Error 2
[email protected]:~/android/kernel/nokia/msm8610$
Click to expand...
Click to collapse
how to solve it!! thanks much

kaotd99 said:
how to solve it!! thanks much
Click to expand...
Click to collapse
Hello,
Use toolchain from CyanogenMod prebuilt repo, here is link: github.com/CyanogenMod/android_prebuilt/tree/cm-11.0/linux-x86/toolchain/arm-eabi-4.4.3
You also don't need to copy config from /proc, it is included in source at arch/arm/configs/msm8610-nokia-defconfig.

zombah said:
Hello,
Use toolchain from CyanogenMod prebuilt repo, here is link: github.com/CyanogenMod/android_prebuilt/tree/cm-11.0/linux-x86/toolchain/arm-eabi-4.4.3
You also don't need to copy config from /proc, it is included in source at arch/arm/configs/msm8610-nokia-defconfig.
Click to expand...
Click to collapse
thanks dev

oh god... i got new error:
i type:
export PATH=/home/kaotd/android/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin:$PATH
export ARCH=arm
export CROSS_COMPILE=arm-eabi-
and:
[email protected]:/home/kaotd/android/kernel/nokia/msm8610# make msm8610-nokia_defconfig
#
# configuration written to .config
#
[email protected]:/home/kaotd/android/kernel/nokia/msm8610# make
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CC kernel/bounds.s
kernel/bounds.c:1: error: bad value (cortex-a7) for -mtune= switch
make[1]: *** [kernel/bounds.s] Error 1
make: *** [prepare0] Error 2
[email protected]:/home/kaotd/android/kernel/nokia/msm8610#
Click to expand...
Click to collapse
can you help me ? thanks.... because im a newbie and sorry about that

kaotd99 said:
can you help me ? thanks.... because im a newbie and sorry about that
Click to expand...
Click to collapse
Hello,
Ahh yep, i forgot switch to memcpy optimizations, here is correct link to newer toolchain android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7

zombah said:
Hello,
Ahh yep, i forgot switch to memcpy optimizations, here is correct link to newer toolchain android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7
Click to expand...
Click to collapse
thanks.. i will try and report to you later!! thanks again

@zombah hi again. i was compiled a kernel( zImage )
now i have "Kernel: arch/arm/boot/zImage is ready"
so how can i compare it with boot.img ?

Hello,
If you wont use inline kernel building inside CyanogenMod, you probably need to unpack boot.img content replace kernel and then pack boot.img again with replaced kernel. Remember that it is dangerous if your kernel is not bootable, you'll stuck to recovery only boot and if your recovery also lost only unbricking will help.
Use CyanogenMod mkbootimg.c/unpackbootimg.c for that, here is repo github.com/CyanogenMod/android_system_core/tree/cm-11.0/mkbootimg
Here is how to compile them separatly of whole system:
Code:
gcc -o mkbootimg mkbootimg.c ../libmincrypt/sha.c -I../include
gcc -o unpackbootimg unpackbootimg.c ../libmincrypt/sha.c -I../include
you'll need to download dependencies also.

zombah said:
Hello,
If you wont use inline kernel building inside CyanogenMod, you probably need to unpack boot.img content replace kernel and then pack boot.img again with replaced kernel. Remember that it is dangerous if your kernel is not bootable, you'll stuck to recovery only boot and if your recovery also lost only unbricking will help.
Use CyanogenMod mkbootimg.c/unpackbootimg.c for that, here is repo github.com/CyanogenMod/android_system_core/tree/cm-11.0/mkbootimg
Here is how to compile them separatly of whole system:
Code:
gcc -o mkbootimg mkbootimg.c ../libmincrypt/sha.c -I../include
gcc -o unpackbootimg unpackbootimg.c ../libmincrypt/sha.c -I../include
you'll need to download dependencies also.
Click to expand...
Click to collapse
thanks much

can you tell me which file contain OverClock number of nokia x2 ? and which kernelPatch i can apply with this kernel ?

Hello,
I don't know, i'm not interested in overclocking and never investigated this question.
And i don't recommend you to play with overclocking without deep embedded development skills, it is very easy to kill your device with wrong power modifiers.

i'm understand, thanks for your suggestion.
not about nokia x2ds but can i ask you a question?
-can i make a kernel source for a mtk device ? because i have a mtk china phone which not have kernel source from manufacturer !

kaotd99 said:
i'm understand, thanks for your suggestion.
not about nokia x2ds but can i ask you a question?
-can i make a kernel source for a mtk device ? because i have a mtk china phone which not have kernel source from manufacturer !
Click to expand...
Click to collapse
Hello,
Sure it is possible, why not. But you need at least serial/uart console on device, otherwise how you will debug kernel boot problems?

zombah said:
Hello,
Sure it is possible, why not. But you need at least serial/uart console on device, otherwise how you will debug kernel boot problems?
Click to expand...
Click to collapse
thanks... now i'm trying to port double-tap to wake feature from Nokia Stock Kernel. There is any suggestion ?? Thanks

i'm trying to add this: https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
and being stuck at editing synaptics_dsx_i2c.c and synaptics_dsx_i2c.h
can you tell me which files is Touchscreen driver of nokia x2 ?? i think it is synaptics_i2c_rmi4.c/.h

kaotd99 said:
can you tell me which files is Touchscreen driver of nokia x2 ?? i think it is synaptics_i2c_rmi4.c/.h
Click to expand...
Click to collapse
Hello,
Nokia X2 have Cypress TMA4XX touchscreen, driver location is drivers/input/touchscreen/cyttsp4*