Hi!
This topic is about real ICS development for Mini.
This topic is only for developing at this moment!
Please, keep this topic clear! I'll answer only for questions about developing or CM9 for Mini. About others, please write to me at PM!
IF YOU WANT TO USE MY WORK, YOUR WORK MUST TO BE OPEN SOURCE TOO!!!!!
Team:
Macław
bagnz0r
tom3q
marcin1147
djsky2011
squadzone
Special thanks:
phiexz
Thanks for all donators. Thanks to you we can provide frequent updates without any problems!
DOWNLOAD: CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7
I CAN USE EVERYDAY, BUT YOU SHOULD DO FULL CWM BACKUP BEFORE YOU FLASH IT!
SOURCES:
non working link removed
DOWNLOAD:
removed due to no GPL compliance
NO MIRRORS!!!
DISCUSSION TOPIC:
http://forum.xda-developers.com/showthread.php?p=23493211
Working:
boot
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
HW acceleration (full)
Sound
Headphones
GPS
All sensors (proximity, roration etc)
CyanogenMod settings (not all, it's not fully merged by CyanogenMod team, not my fault)
Market (now you can download all apps available for Gio with GB)
Fixed animations (now it looks so good)
Facebook sync
Buttons backlight
BLN support
GMail fully works
Browser fully works
ICS keyboard
Games - works as smoothly as on Gingerbread
YouTube
Deep sleep
Wifi signal indicator
Native Android mass storage
Without flickering
Almost working HW video acceleration
Smooth YT (LQ right now)
Live Wallpapers
Not working/Known bugs:
If you find any bug or you want to see what bugs has this rom, go there.
If you have problems with WIFI, you must to apply that patch:
link removed, non gpl compliant.
To get FM radio working, you must to install Spirit FM app and then go to:
Settings=>Region frequency=>Europe
Settings=>Audio=>Method=>msm7x30 Si5500
CHANGELOG:
-----beta7
New Adreno200 libraries for ICS
Fast and smooth system
Live Wallpapers working - won't slowdown your system, like on Gingerbread! (I'm using Phase Beam, it's beautiful)
Gallery and calculator fully working all the time
Gmail working without any problem
Browser working really good (smooth and fast)
All apps with graphic problems, like Poweramp, now working without any
Updated AOSP/CM9 sources
(development info) New gralloc and hwcomposer
Updated Macław's audio libriaries
FM seems to be working
-----beta6
Android updated to 4.0.4
Clean CyanogenMod - we're using only CM9 sources with our device sources!
Super smooth system
Smooth windows animations
New phone lock animation
Hardware acceleration on most video formats (not all)
Smooth videos on YouTube (LQ only right now)
Fully working deep sleep (all the time when BT is disabled)
GSM fully works (signal indicator/mobile data/phone calls/messages etc.)
Updated GoogleApps
Temporary removed CRT screen-off animation (will be back in beta7)
-----beta5
Flickering is gone
Working native mass storage (no need for annoying UMS app again)
Updated CM sources
New kernel, updated to 2.6.35.7perf-CL945787
Smoother than Gingerbread
Really good system performance
Improved GPU performance
Removed UMS app
-----beta4 - Macław and Mikegapinski build
First release for Galaxy Mini
Deep sleep working - happy battery ;-)
Wifi indicator fixed
Fixed BT issues
Bluetooth headsets support
BLN support for all devices
Updated kernel [Macław]
Reduced flicker, but still exists
Soooo smooth
Added working GalaxyICS app - you can update your CM9 directly from your device
Of course updated CM9 sources
-----Nigthly 02-03-2012 - Macław and Mikegapinski build
From user view:
Base video acceleration - BUT STILL NOT FULL
Really improved performance
Small battery life improve
Added a lot of Qualcomm hardware libraries, which making CM9 stable and smooth
Still flickering, but you won't see it in everyday use
Updates in my famous libaudio
From developer view:
Rebuilded device sources
Cleaned config sources (no more use external hardware sources, small fixes on framework, nothing else!)
Included base video acceleration - but videos is still laggy
New, rewrited libgralloc
Removed unsused libcopybit
Finally with enabled QCOM_HARDWARE flag
Compiled with all of QCom stuff
Clean base Android sources - only needed changes in GalaxyICS config
-----Beta 3
Working GalaxyICS app - news about project and updates directly from your phone!
Added CM9 bootanimation
Fixed all apps, which using webcore (Facebook, Gallery etc.)
Fixed wrong text at wrong place
Fixed some issues in Phone.apk
Fixed user-agent in default Android browser
Latest CM9 sources - CM Settings, like percent battery indicator, finally working
Readded CM9 Music Player
Performance boost
-----Beta 2
Improved battery live
Working browser with full GPU acceleration and saving pages functionality
Working Gallery
Working GMail
Fixed CPU sleep when screen is off
Less flickering
-----Beta 1
Full HW Acceleration - smooth Trebuchet
YouTube fixed (temporary laggy)
Backlight works
New libaudio, rewritted from begining [Macław]
Some changes in framework
Updated sources
All headsets works
Temporary GMail and stock browser doesn't work propertly (graphic glitches, will be fixed)
-----Alpha 3
Fixed ICS keyboard
GMail fully works
Browser fully works
Performance boosts
Flickering is almost gone!
Merged with ICS-ACE project
New kernel [marcin1147]
Updated CM9 sources
Removed unused apps
----- Alpha 2
Fixed animations! Now it's working better than GM9
Market fixed, now you can download all apps available for Gio with GB
Calendar fixed
SetupWizard is working
BLN support
performance improved
Superuser binaries and app updated
Included Google Apps
----- Alpha 1
first CM9 for Gio release, based on original CM9 sources
placeholder3
First of all.... Thanks Maclaw for considering our galaxy mini too.
I can understand all you want to say thanks but, that will make this thread look buggy and spam the thread and thus, make it less useful. So, why not just press the thanks button.
Moreover, YOU can ask your general questions at this thread :
http://forum.xda-developers.com/showthread.php?t=1539729
Beta4 tomorrow ;-)
Guys, I know you are excited, but cmon, 50 useless posts?
You want to say thanks, click the thanks button
You want to contribute, sources are up
You want to support donate to the OP
But under no circumstance spam a development thread with unuseful posts!!!, that will only slow down development. Let developers do their job ok?
Thread cleaned!!!
Sent from my GT-I9100 using xda premium
[*INSTRUCTIONS:-(I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED)
FIRST DOWNLOAD CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7 ZIP AND GAPPS.
Place the zip files into your Sdcard.
Reboot your phone into CWM(clock work recovery mode)PRESS POWER BUTTON+MENU BUTTON
Wipe your cashe,data,go to advanced and wipe Dalvik cache and battery stats.
Now go to install zip from sd-choose zip from Sdcard-then select the zip file(CyanogenMod 9.0.0-RC0-GT-S5570-GalaxyICS-KANG-beta7)] which you placed it in the sdcard.
It takes hardly 4 to 5 mins. now wipe cashe and data.
Now Flash the gapps zip .
Restart your phone.
Note:-First boot takes much time (after installation)
See below.
D.O.C said:
I dont know if these are official thread, but they are definetively discussion threads about cm9 and not development threads.
[General] [Q&A] Cyanogen Mod 9 Beta 4 For GT-S5570 : For all your questions.
*CyanogenMod 9 Discussion Thread*
If you do not develop, go to one of the above, please.
Once again, thread cleaned.
PD: I will close one of the above threads (probably the one not being updated in the OP, unless maclaw or any team members open up an official one or decide to keept one, no point on having two of the same, your choice.
Click to expand...
Click to collapse
I have opened my own discussion topic, please, close the both you mentioned.
There's my discussion topic:
http://forum.xda-developers.com/showthread.php?p=23493211
I have test package, if somebody can test it, please, try it:
http://maclaw.galaxyics.com/cm_tass-ota-eng.maclaw.zip
I need quick test, I have only one hour!
Please, try to make call. If everything will be ok, you'll get beta4 today.
ill test oki finally release and i think it will work well cause anything you release works well but how to install it? need to clear dalvik cache? reset factory?
Wipe data (factory reset)
ok alredy downloaded now goin to flash it
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
flasing nowww
aaand
Sent from my GT-S5670 using Tapatalk
cant even flash the zip...??
renersed for future. still installing
i will post newest screenshot here
What working: boot loop (sorry)
=>solution: try other kernel
logcat not working
Ok, so if it'll work, you'll get beta4 in the evening.
how can u install it
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
installing:/sdcard/cm_tass-ota-eng3.zip
Finding update package
opening update package
installing update
installation aborted..
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
mhm... time to flash back gingerbread with odin
lokenok said:
how can u install it
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
installing:/sdcard/cm_tass-ota-eng3.zip
Finding update package
opening update package
installing update
installation aborted..
Click to expand...
Click to collapse
Check if you downloaded file successfully by extracting it with winrar.
Related
Note: This port is 100% built from source, heavily based on my "Galaxy5" device sources. The reason why I have decided to develop/release this ROM is that I prefer to use a vanilla CyanogenMod build (with no customized/extra apps included), and I noticed some issues with all existing builds (e.g. FM radio, audio device routing, native CyanogenMod USB tethering) which I have already fixed in my Galaxy 5 port.
I don't actually own this phone, but I will offer support in my free time while I still have the device in my possession, and sources are provided.
CyanogenMod 7.2.0-RC0 "GalaxyMini" Port
Latest release: v1.2 [26 January 2012]
Latest Google Apps package: official: 20110828
Hey folks,
This is a port of Cyanogen 7.2.0-RC0 (based on Android Gingerbread 2.3.7) for the Samsung Galaxy Mini (GT-S5570) phone. The current port status is stable - most hardware is working correctly, but see post #2 for known issues.
Thanks to all who have contributed/shared code from the Galaxy 5 port, as well as coolya, tj_style and teamhacksung for the kernel patches and reference Tass device configuration.
Pre-requisites:
Your phone must have a Gingerbread bootloader installed (as it uses the 2.6.35 kernel & Gingerbread proprietary files).
Any version of ClockworkMod that supports EXT4 partitions. Unfortunately, the build supplied with ROM Manager doesn't seem to be compatible.
Recommended: ensure that you have a backup of your current ROM and user data.
Installation:
Note 1: you always need to re-install the Google Apps package after installing a full update package.
Reboot into ClockworkMod. You can do this via adb reboot recovery, or by choosing the Reboot -> Recovery menu if you are already using CyanogenMod.
If you are upgrading from a stock or custom ROM, you absolutely must perform a data wipe: Select wipe data/factory reset and confirm the operation. Note that you will lose all of your user data, so be sure that you have performed a backup. Otherwise, skip to the next step.
Choose the option install update from sdcard -> choose zip from sdcard. You will see the two (or three) .zip files in the list.
You must install the two (or three, if you have a hotfix) files in this exact order:
The base package named update-cm-7.X-GalaxyMini-vY.Z-MADTEAM-signed.zip
[If exists] The latest hotfix package for the same base package version, named GalaxyMini-vX.Y-hotfixZ.zip
The Google Apps package, named gapps-gb-DATE-signed.zip
Once all packages are installed, you can now reboot.
Installation (hotfix update only):
Note 1: hotfixes are cumulative - this means that you only need to install the latest hotfix, because it contains all the fixes of previous hotfixes.
Note 2: you don't need to re-install the Google Apps package if you are only installing a hotfix update.
Note 3: only install hotfixes that match the full update package version (e.g. v1.5hotfix1 only matches release version v1.5).
Note 4: hotfixes do not require a data-wipe.
Download the latest hotfix package and transfer to the SD card.
Reboot into ClockworkMod Recovery.
Choose install update from sdcard -> choose zip from sdcard, select the hotfix and confirm installation.
Reboot.
Latest Changelog:
Note: "Data wipe?" only refers to when you upgrade from a previous version of my ROM - not anybody else's. For every other case, follow the guidelines of the Installation section above.
v1.2 [26 January 2012]
Data wipe? Only if you experience problems.
Updated CyanogenMod source.
Now includes ICS transition and rotation animations (merged officially into CM7.2).
Fix for rare issue where notification area items can get "stuck", causing notifications to malfunction.
Kernel: removed Samsung's drop_caches code in order to prevent periodic cache flushes that can reduce performance.
Wifi: disabled combo scan due to problems with reconnect from idle; tweaked TCP buffering to improve performance.
Bluetooth: improved configuration (enabled HFP support, increased max BT connections from 1 -> 3).
libaudio: updated code & removed proprietary liba2dp.so.
v1.1 [20 January 2012]
Hotfix 1 [20 January 2012]: Improve wifi connectivity (changed from ar6000 -> wext wpa_supplicant driver with combo scan enabled, enable ssid scanning in configuration to fix hidden networks); add missing FM Radio application; updated proprietary files with newer versions and added some missing files to fix keymaps.
Data wipe? Only if you experience problems.
Updated CyanogenMod source.
Kernel: fixed charge reboot issue (thanks to squadzone for tip).
Kernel: patched bma_accel_driver.c to enforce minimum poll_delay threshold. This fixes all Google Maps 6.x issues, and will probably also fix lag issues in applications that try to excessively poll sensor data.
v1.0 [15 January 2012]
Hotfix 2 [17 January 2012]: Framework: reduced LatinIME key height in landscape mode (.25in -> .23in). Kernel: tweak smartassV2 CPU scheduler to make better use of the Mini's available CPU frequencies; removed SCHED_HRTICK kernel tweak due to instability/random reboot issue; update CPU & AHB overclock code (CPU overclock up to 864Mhz, but 844Mhz seems to be the maximum stable frequency for my phone; AHB now overclocks at frequencies higher than 400Mhz instead of 480Mhz). Once again: overclock frequencies are not activated until you enable them manually, and you do so at your own risk.
Hotfix 1 [15 January 2012]: Framework: enable purging of unused assets by default. Kernel: enable "veno" TCP congestion protocol to improve wireless reception, configuration changes to help battery usage, several stability & performance patches (see github commits), enabled CPU overclock to 768Mhz with 50% AHB overclocking (thanks to kalltkaffe). Note: the kernel will always boot at the safe frequency of 604Mhz; you must manually enable overclocked frequencies in CyanogenMod - Performance -> CPU. I accept no responsibility for damage as a result of using overclocked frequencies!
Initial status: everything appears to be working correctly (but I may have overlooked some issues).
Based on latest CyanogenMod source (Android version 7.2-RC0)
Patched: wpa_supplicant_v6 ar6000 supplicant driver
Patched: swap volume control buttons at 90 degrees orientation
Patched: enable bcm2049 fm radio & better seek support
Kernel: based on teamhacksung's android_kernel_samsung_msm, with additional patches: BFQ IO scheduler (default), interactiveX, smartassV2 (default) cpu schedulers, fix for CyanogenMod native USB tethering, replaced ramzswap driver (for CMParts/compcache/rzscontrol ioctl compatibility).
Source Code:
Kernel: https://github.com/psyke83/android_kernel_samsung_msm
Device: https://github.com/psyke83/android_device_samsung_tass
Further Information
Not working / TODO:
SIM Toolkit (menus will display, but options/commands do not process properly when selected).
Battery drains: CyanogenMod doesn't report the battery status properly. Please read this post.
Not working / WONTFIX:
Kies. Don't expect Kies to support any custom ROMS.
Before you ask...
I have no interest or intention to further "mod" the ROM with any kind of hacks or customizations (like custom apps, themes, Swype, etc.). My only aim is to have a 100% stable port of CyanogenMod code. Any such requests will be ignored.
Reporting bugs
You must follow these instructions exactly, or I will ignore your requests. Provide the following information:
The version of the ROM you are using (to confirm that you have the latest release)
Report any customizations you have made to the ROM (themes, system apps, etc.)
Describe the problem clearly, including steps on how I can reproduce the issue.
Provide a logcat from your system taken just after the issue has occurred. To take a logcat, you enter this command from your PC: adb shell logcat -d >c:\logcat.txt. Copy and paste this log to pastebin.com, and provide the link.
If I ask you to re-test the issue after a data-wipe, do the following: reboot into ClockworkMod, perform a full backup, then data-wipe, reboot and retest the issue, giving a new log if necessary. You can then reboot into ClockworkMod and restore your data backup.
Reserved for future use...
i will try this,but whats different from Squadzone Cm7?? btw,thank you very much for apreciating hats off for you bro
sorry for my bad english
Junnie said:
i will try this,but whats different from Squadzone Cm7?? btw,thank you very much for apreciating hats off for you bro
sorry for my bad english
Click to expand...
Click to collapse
I tested squadzone's RC4 build - it was nice, but I noticed some problems that I already fixed in my galaxy5 port (the hardware is very similar). I already mentioned a few of the bugs in the blue text of post #1. I also don't really like when Google apps or other third-party apps/customizations are bundled in a ROM - my CM7 build is as close to an official build as possible (no added apps, themes, modified effects).
My kernel is quite simple, based on teamhacksung's source with patches to fix some bugs related to USB tethering and just the best IO/CPU schedulers added. Overclocking is not added to my kernel, but I may add it later on, once I've had time to test overclock stability on this device.
If you don't care about "purity" and you like all the extras included with squadzone's ROM, feel free to continue using it . It's nice to have more choice, I think.
subpsyke said:
I tested squadzone's RC4 build - it was nice, but I noticed some problems that I already fixed in my galaxy5 port (the hardware is very similar). I already mentioned a few of the bugs in the blue text of post #1. I also don't really like when Google apps or other third-party apps/customizations are bundled in a ROM - my CM7 build is as close to an official build as possible (no added apps, themes, modified effects).
My kernel is quite simple, based on teamhacksung's source with patches to fix some bugs related to USB tethering and just the best IO/CPU schedulers added. Overclocking is not added to my kernel, but I may add it later on, once I've had time to test overclock stability on this device.
If you don't care about "purity" and you like all the extras included with squadzone's ROM, feel free to continue using it . It's nice to have more choice, I think.
Click to expand...
Click to collapse
damn,this is what I was looking for dude !! no bundled apps on ROM,only pure ROM from source ..hell yeah i agree with you bro !! i think i gonna love your project dude,if you continue this project? good news if this updated
subpsyke said:
I tested squadzone's RC4 build - it was nice, but I noticed some problems that I already fixed in my galaxy5 port (the hardware is very similar). I already mentioned a few of the bugs in the blue text of post #1. I also don't really like when Google apps or other third-party apps/customizations are bundled in a ROM - my CM7 build is as close to an official build as possible (no added apps, themes, modified effects).
My kernel is quite simple, based on teamhacksung's source with patches to fix some bugs related to USB tethering and just the best IO/CPU schedulers added. Overclocking is not added to my kernel, but I may add it later on, once I've had time to test overclock stability on this device.
If you don't care about "purity" and you like all the extras included with squadzone's ROM, feel free to continue using it . It's nice to have more choice, I think.
Click to expand...
Click to collapse
I like you bro..
And I'm pretty sure I will like your work also..
much much better ... more power.
Btw .. I like that word... "Purity" = "Cleanliness"
i`ve tested it , and hard to say..ITS AWESOME !!!
Pros
Density fit for our phone
clean UI
apps working great
no more scatter video
Cons
a bit laggy dude
can you make the kernel and make it more smooth ?? i really love your ROM
Could you upload screenshots? I really want to see how this turns out.
Thats not fair.
I loved cm7 rc4 rom from Squad. But as you mentioned there are still to many bugs. For example camera has not sometimes, it has always wrong oriantation. No radio, etc.
Therefore I went to emanoN v3. This rom is really good. Now emanoN has an update and cm7 comes back newly and clean programmed.
I will give it a try. Thanks for your time and support offering us this rom.
Grettings from Ruhrpott http://en.wikipedia.org/wiki/Ruhr
the best cm7 build until now
but i have i question: the lockscreen seems not working, i think it's turned off because i can wake up the phone only with home or power button, and i'm on home screen immediately without unlocking
i checked in cyano lockscreen settings and there is no lockscreen on/off option
however, on the one hand it's good too because in my pocket it's impossible that home or power button gets pressed
so it's a bug or feature?
and big thanks for this clean cm7 build, i appreciate your work
Actually i find this post the best...
Only ... the problem is...
can you return the density like tj_style density of cm7?
its hard to get over with... a change in density i mean.
looking forward on your next update!!!..
i love this !! were getting cm7 updates...
....
trance89 said:
the best cm7 build until now
but i have i question: the lockscreen seems not working, i think it's turned off because i can wake up the phone only with home or power button, and i'm on home screen immediately without unlocking
i checked in cyano lockscreen settings and there is no lockscreen on/off option
however, on the one hand it's good too because in my pocket it's impossible that home or power button gets pressed
so it's a bug or feature?
and big thanks for this clean cm7 build, i appreciate your work
Click to expand...
Click to collapse
Just reboot your devices.
Wery thanks you!
Samsung Galaxy 5 I5500 its my first android phone!
(on it only stock 2.2 and CM by MADTeam)
But i cell it and buy Samsung GT-S5570 Galaxy Mini!
THANK YOU FOR NOSTALGY!
so this has no bugs?? and fm radio works??:O:O
Hi Subpsyke
This Rom is Perfect, Pure And Awesome
I Have Only 1 Request, Can You Build An OverClock Kernel Best Up To 806
To unleash The Our Devices True Power
And Thnx Again For Your Awesome CM7
raven09 said:
Just reboot your devices.
Click to expand...
Click to collapse
and you were right, thanks
Downloading. Lets see how it goes.
t-r-e said:
Hi Subpsyke
This Rom is Perfect, Pure And Awesome
I Have Only 1 Request, Can You Build An OverClock Kernel Best Up To 806
To unleash The Our Devices True Power
And Thnx Again For Your Awesome CM7
Click to expand...
Click to collapse
yess +1 we only need overclock kernel and you're rom will be awesomeeee
+1 This is exactly what I wanted to say. These days all ROMs are getting updated. Changing my ROM almost everyday now Today I am changing to this one.
motorazrv3 said:
Thats not fair.
I loved cm7 rc4 rom from Squad. But as you mentioned there are still to many bugs. For example camera has not sometimes, it has always wrong oriantation. No radio, etc.
Therefore I went to emanoN v3. This rom is really good. Now emanoN has an update and cm7 comes back newly and clean programmed.
I will give it a try. Thanks for your time and support offering us this rom.
Grettings from Ruhrpott http://en.wikipedia.org/wiki/Ruhr
Click to expand...
Click to collapse
Project JellyBeanSwift - Android 4.1.1 base on CyanogenMod 10 with 2.6.35.10 kernel by miroslav_mm
Currently working:
Browser
DSPManager
Audio
EGL (2D/3D)
Gallery
H/W Acceleration
Codecs/Video Playback (only soft)
Headphones/Headset/BT-Headset
Keyboard
Lights
Overclocking
Live Wallpapers
Deep sleep
Phone radio (calling, sms, mms, data)
SD-EXT
Swap
Sensors
Sound & Mic
Root
Superuser
Wifi
Bluetooth
Touchscreen
USB Mass Storage Device
Vibration & Haptic feedback
GPS
Google Sync
Market
Data Counter
Color Banding
KSM
Qualcomm ICS GPU drivers
Clean CM10
Not working:
Native Bluetooth Tethering (untested) (use alternative app)
Native Wifi Tethering (untested) (use alternative app)
Native USB Tethering (untested) (use alternative app)
Camera
Camcorder
H/W decoders/encoders
FM Radio (use Spirit FM)
and other little bugs.
New build 09.08.2012
Update from CM
Browser fix
Improve performance and speed! You must check/try it!
a lot fixes from me
For recovery:
http://depositfiles.com/files/4qles2kgd
Build 24/07/2012
For recovery:
http://depositfiles.com/files/xq3dr8x9x
Gaps included!
Minimum system part - 215mb.
Main topic:
http://4pda.ru/forum/index.php?showtopic=362756
If you want support me - Donate on WebMoney
Z385011021297
R105928067702
E355930075366
U267621943817
And you did it again! Hope this turns out great! :good: :good:
The king dev for swift ever! Thanks Miroslav_mm!
P.D.: Are you planning to release SDSL 2.2 ?
yessssss should try
---------- Post added at 02:05 PM ---------- Previous post was at 02:03 PM ----------
but will wait for next build
Phone.android.com gives me force closes.
Hope that will fixed soon .
Anyway good job mate .
Hope it we will have good jellybean rom.
miroslav is project butter working
I think he said before that it wont due to hardware restrictions.
can't wait to try it.
Wow. Thanks again miroslav!
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
snakkarike said:
miroslav is project butter working
Click to expand...
Click to collapse
-Grift- said:
I think he said before that it wont due to hardware restrictions.
Click to expand...
Click to collapse
Or not until cm does something for it...
---------- Post added at 03:32 PM ---------- Previous post was at 03:24 PM ----------
İm unable to download from deposit. Can anyone reupload and pm me the link? Thanks!
Another amazing project from my favourite Dev!
I'll have to dust off the gt540 for this
Sent from my GT-I9000 using Tapatalk 2
Nothing interesting. Same stuff as in DevSwift's build working. It's still not so useful without HW codecs. Good to look at it for a while and restore 2.3 backup as i always do.
@Edit: Also faced a reboot when i was trying to set it up, removed, MIUI restored.
Koloses said:
Nothing interesting. Same stuff as in DevSwift's build working.
Click to expand...
Click to collapse
The same? SD CARD, UMS, HEADPHONES, VideoPlayback, Audio, OC ... ?
why CM9 boot animation ?!
i have the bug in procesor like CM9 in devswift rom i don't have this bug i will check new build...
Niquel97 said:
Phone.android.com gives me force closes.
Hope that will fixed soon .
Anyway good job mate .
Hope it we will have good jellybean rom.
Click to expand...
Click to collapse
Happens everytime time...
EDIT: Did you notice Jelly Bean roms have the same Force Close? e3e
Sent from my Sony Tablet S using xda premium
Yeah force closes happen also Devswift's rom.
But both are still alpha versions.
My Review
After a couple of hours testing JBS this it's my review:
Pros:
- SuperMega Fast Boot, only 20 seconds.
- Fast Locking & Unlocking.
- Fast stock Gallery.
- Fast Opening Settings.
- Smooth Launcher.
- Fast opening Call dialer and Contacts. :victory:
- Good battery performance.
- Awesome animations without lag. :cyclops:
- Fast SD Card writing & reading.
- Apps load faster than ICS and other GB's.
Cons:
- Only one FC com.android.phone on every boot, but after that works perfectly.
- Camera
- Sometimes Deep Sleep doesn't works.
- Lag typing.
- After a couple of installed apps, phone gets a little laggy, but i think it's a memory problem i guess. (Restarting phone fix this.)
Overall: 8/10 :good:
- And i think this project probably will be the fastest and smoothest ROM for our LG Swift.
Congrats Miroslav_mm! Awesome job. :highfive:
Very nice, way better than latest devswift's build: perfect colors, the CM statusbar buttons, and everything else.
I fixed the misplaced launcher elements by installing Apex, now hopefully someone will fix camera too so JB on Swift will be almost feature complete. Except codecs, sadly...
I'm curious if anyone manages to make Google Now install and work: the QuichSearchBox.apk I found wouldn't install, I wonder why...
justsayin' said:
why CM9 boot animation ?!
Click to expand...
Click to collapse
This Custom CM10 Bootanimation is really cool:
http://forum.xda-developers.com/showthread.php?t=1782074
coto39 said:
This Custom CM10 Bootanimation is really cool:
http://forum.xda-developers.com/showthread.php?t=1782074
Click to expand...
Click to collapse
yeah it is used by devswift JB rom
CyanogenMod 7.2 for Galaxy ace i (S5830i, S5839i, S5830M, s5830C)
This device is also known as cooperve
If you appreciate the hard work I've made for the device, give me a thanks donate me something, that will estimulate me more! Click on the button below, for more information:
CyanogenMod 7 is a free, community built, aftermarket firmware distribution of Android 2.3.7 (GB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Changelog:
RC 4:
Fixed al 3g and Data issues on EXT4
My FIX.zip integrated on the ROM zip
IMEI is showing on EXT4 data partition
RILD is now prebuilt and updated last LibRIL.
Broken WIFI hotpost os wprking again
Icon of Wifi Hotpost is working well
ethd back again
RNDIS and USB0 are initialized in USB tether (still not working)
Torch FC's solved using real Flash light file
Camera using now the real Flash light file (flash still not working )
Added all offline charging files
Fixed offline charging using my 3.0 #7 kernel
NOTE: No format is needed, update-script has been modify to format the partition automatically
RC 3:
Fixed loud headphones and speaker!
Fixed not working 3g after turning off WIFI
Cleanded up system.prop
Improved Camera with missing build.prop tweaks
Added two more camera libs, to get a better stability (libmmcamera)
System is faster than ever, due to EXT4 file system
NOTE: This ROM is only compatoble with my kernel 2.0 or up, or all the kernels that supports CM and EXT4 at the same time.
NOTE: Read the instructions (2ND POST) carefully if you don't want to get you a brick from it.
NOTE: Wipe is needed, you can't upgrade from RC2 without wipping, or if you are lucky will boot, but won't work as it should! Wipe required!
TWO VERSIONS: RFS and EXT4. If you are not a developer or tester, donwload RFS!
RC 2:
Fixed lots of Audio issues
Audio rotation (SPeaker / headphone) fixed
Force Close with DSP manager fixed
Froce Close with Music CM7 app fixed
Headphone issue completely solved
Improved audio quality
Bitton-backlight has been fixed
Button-backlight works without breaking media scanner
HQ has been fixed, HQ youtube tested
Audio while HQ and videos better than before
FM radio has been added (still not working)
Menu button does not unlock the phone anymore by default
Fixed all Force close on Torch app
Network location fixed / improved
Built libncurses from source
Reduced lots of Camera crashes
Add some missing camera libs to build
Edited Update-script to give cleaner installation
RC 1:
Fixed HW 100% working
Fixed glitches on the screen, no more glitches ever!
Smooth HW than before, Broadcom test libs were a s***
We are not using Broadcom libs anymore
Used ALCATEL video encode / decode and HW libs
Uisng ALCATEL Proprietary files
THANKS TO ALCATEL AND LEGOLAS93: video encoding and decoding fixed
Fixed bluetooth on my kernel
Fixed Bluetooth on the ROM too
Sending files and recieveing files are now working
Need to update to kernel v 1.0 #3 to work
Implemented this new fully work libs on new Build from source
Camera preview working
Taking pictures faster and better quality
Video recording fixed
Audio recording fixed
Camera app working as it should
USE_CAMERA_STUB set to true
Removed all camera overlay
Video playback working, we can now watch videos
Fix Audio on play videos
RE-built whole build.prop
Improved Network location
Fixed Signal bars (white/blue)
3G and H working with signal bars too
Added new build.prop tweak, to disable rotate animation (Read Bugs)
Fixed Boot animation - Thanks to Prototype-U
FIxed random reboot caused by HW libs by broadcom, super-stable ROM
Stable release - RC1
BETA 4:
Most expected release
Fixed WIFI on new config
RE-builded wpa_supplicant.conf
Wifi faster than before using android Private Socket
Media Scanner Fixed
CM7 Native Audio Player working
RE-built audio libs thanks to patched libaudio from PsychoGame
Removed all samsung Audio stuff
Improved quality sound
FIxed headphone issue (low volume now is Good)
CM7 Native Gallery App working
CM7 Native File manager Working
Removed all space apps (Download them on 3rd post)
Improved RIL thanks to new RIL config by spacecaker
Fixed Torch on Device source code (Not smali)
Wait a few seconds before turingin ON again, it will collapse itself and force close
Re-built device tree from scartch
Bigger clean-Up ever (true)
Removed most of vendor files used on beta 3
Most of this parts built from CyanogenMod
SMoother release with new GPU rendering and screen render
Spacecaker implementation on vendor files upgrades speed
RE-built build.prop - Faster 3G speed
Camera Native CM7 with white screen bug
NOTE: Read installation isntructions
BETA 3:
Builded from last CM7 sources (repo sync)
Builded in new build enviroment, for 4 devices
Added 3 important build.prop tweaks
16 bit transparency enabled by default - SMOOTH
Force scrolling cahce disabled by defalut - LESS GLITCHES
Some build.prop about JIT
New framework base patch, new variable called from HLG, reduces glitches as well
Patched last CMParts, thanks to spacecaker and my search
Fixed problem with OTA Package on Sources
You can disable 16 bit, cache on CM settings as well
Smoothnes release ever, really difficult to improve.
BETA 2:
NECESARY: Settings -> CyanogenMod settings -> Performance -> enable Use 16bit transparency -> reboot
Feel the smoothnes of CM settings + new egl.cfg
Glitches reduced nearly 0 (there are some, but much less than before)
New config on EGL.cfg which reduces glitches
Some new build.prop tweaks to a better improvement
Smoothness release ever
Reduced reboot random times
Same build as beta 1 as we are having some problems with new device tre
BETA 1:
Going to Beta thanks Wifi fixed
Finally Fixed Wifi 100% - many thanks to WhiteXP
Added flashlight files to ROM (not working yet)
Added some live wallpapers
Added to build live wallpapers on device tree, not on CM sources
Builded in a new build enviroment (100% new)
Torch app added (but crashing)
Disabled option to build open gralloc (it didn't work)
Added new autofocus files for camera - autofocus faster
Added some new etc/permissions xml files (check github)
Small cleanup and re-order source again
Thetering and wifi hotpost working
ALPHA 4:
Bigger cleanup ever
Proprietary libs moved to vendor folder (Except Gralloc)
Some fixed on Gralloc build and typo
All proprietary libs updated to last stock rom
Camera much more smoother
Camera forced to work without EGL drivers -> smoother
Builded on new development enviroment (all programs updated)
ALPHA 3:
Removed space media app
Audio app from CM7 added again
Audio app edited to not show video icon
MX player modifyed to play videos good
Camera working Preview smoother
Added LiveWallpapers (water one doesnt work)
Big Cleanup on sources
From developer view:
Orgsnissation of all libs and creation of an ICS branch
Added option to build broadcom open source drivers (the ones from Whitexp)
Added option (else) to use broadcom binaries released
In this build used tje one provided by qualcom
Added much more new libs to work better which such 3rd apps
ALPHA 2:
Gallery working, using SpaceGalleryV1.0.1 (Based on Quickpic)
Media working with Space-MediaV1.0.0 (Based on Meridian)
Camera working PREVIEW Space-camera v1.0.0 (Camera Illusion)
As a consequence Media scanning working with those apps.
Merged Music+Video/ Media Icon in one *Media Player
Deleted CM7 Original Camera app
Deleted CM7 Original Media app
Deleted CM7 Original Gallery app
Added File manager again
Cleanup on sources
Added new libs to work better which such 3rd apps
Mount system to install it better
ALPHA 1:
Going to alpha versions thanks 3g + RIL working
Really big cleanup on sources
Fixed 3g and data, thanks Maslin Sergey
Audio should work better
Using prebuilt mediascanner libs - mediascanner works with meridian
Meridian app added by default - thanks whitexp
Improvment on CRT animation (old TV animation)
WIfi improvments, but not working yet
Added Quickpic for photos - as mediascanner isn't working
To install same as pre-alpha 2 and it BOOTS
PRE-ALPHA 3:
Sources cleaned again
Audio libs added (cause sintax error)
Usb error fixed cause to missing file
To install same as pre-alpha 2 and it BOOTS
PRE-ALPHA 2:
Sources cleaned
Framework/base patched applyed (sure)
Any kernel on package
New meta-inf, the one provided to a better installation
to install flash hell lock kernel and then flash this zip
PRE-ALPHA 1:
Iinital build (not booting)
EGL libs by broadcomm installed by default
First build from sources for ace i based on galaxy y sources (thanks whitexp)
Hell lock kernel by default
Instructions:
YOU CAN WATCH THE VIDEO ON 2ND POST!
Download CM7 Rom from this post, CM7 Basic kernel from HERE and Google Apps from HERE
Flash my CM7 Basic kernel through CWM
On the same CWM, without rebooting: Wipe Data, Cache and Dalvik
Mount System
Flash CM 7.2 which you can download below
Flash Google apps downloaded above (1st step - link)
Download:
Full Downloads:
http://bieltv3.blogspot.com.es/p/downloads.html
Galaxy Ace i CM7.2 Downloads:
http://bieltv3.blogspot.com.es/p/galaxy-ace-i-cm72.html
What's working:
Everything except Bugs down here!
What's partially working:
HW LIBS: We are using alcatel pre-built libs due to his devices uses nearly an AOSP ROM. AOSP and CM are compatible, so we try to use the Alcatel libs to implement on our last build, this was kind of a mess because lots of libs call others, so we need to pre-built all the encoder and decoder libs, but with a succefully result.
Well, due to this libs are prebuilt libs, and just work 100% on AOSP, some CM configs does not work, and this include this:
CRT Animation: This is a CM implelemtation, not on stock ROM from alcatel, so libs are not prepared to work with it.
Screen Rotation animation: I don't know why, libsurfaceflinger is not compatible with effect of rotate CM do, that is why I've added a configuration on the build.prop that reverts the animation, making the rotation witout animation, jsut rotates as it should. If I activate the animation, green screen will show up while animation is working.
CM Rendre effects: All the effects that CM added like the render effect don't work too because they were not implementend in AOSP, they were not implemented in our AOSP Alcatel libs, so it is not supported
Before asking, NO, this libs won't work on Android 4.0.4 Ice Cream Sandwich or plus.
Flash on camera: As far as I know, I've investiagted about it, and samsung used a weird interface to work with the flash on camera in stock rom. there is not a dedicated folder for that led, so i don't know yet how to implemetn it on CM7 camera app. THERE IS A FIX ON 3rd POST.
What's not working:
Native USB Tethering: USB tethering is started and with good configs (usb0 and rndis0) and seems no problem, logcat does not show nothing irrelevant, but we don't know why it is not working. I think it has something to do with brcm_switch.ko module, I'll take a look as soon as possible, but I don't know why does not work. Afaik brcm_switch.ko is not proper loaded, and I don't know the cause of it. YOU CAN FIX IT USING 3rd party apps.
BroadcomCM Team:
bieltv.3
spacecaker
Percy-g2
Kissingmylove
Legolas93
Special Thanks to:
WhiteXP
PsychoGame
Prototype-U
Lopicl.00
Sources
Our Sources can be found on github: Sources
Google Apps
http://goo.im/gapps/gapps-gb-20110828-signed.zip
Screenshoots:
XDA:DevDB Information
[ROM][DEV] CyanogenMod 7.2 - BroadcomCM [COOPERVE], a ROM for the Samsung Galaxy Ace S5830
Contributors
bieltv.3, SpaceCaker, PsychoGame, Lopicl.00
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Kernel by bieltv.3
Based On: CyanogebMod
Version Information
Status: Stable
Current Stable Version: RC 4
Stable Release Date: 2013-08-16
Created 2013-11-18
Last Updated 2013-11-18
POLL :
PLEASE DO THE POLL UP, WILL HELP ME BEFORE STARTING ANYTHING ELSE
INSTALLATION :
INSTRUCTIONS TO INSTALL CM7:
HOW TO COME BACK TO STOCK [RFS] - thanks lopicl.00
Restore Stock ROM with ODIN
When done, Boot to stock CWM
Wipe Data / Factory reset, Wipe Cache partititon... (this will revert data and cache to RFS)
Reboot system now
Camera Flash Fix.
Note: This app is pretty nice, and works without any problems, only bug is flash while recording, but now pictures can be taken with flash working.
Download: http://www.mediafire.com/download/aymjhf5ed1y54o4/FLASH-FIX.zip
All right, to install this patch here are
INSTRUCTIONS:
Go to Recovery (CWM)
Mount system
Install zip from SD card
Install FIX and reboot
*these apps where used in the source of BroadcomCM but removed due to the working media scanner
these apps are additional and do provide a bit better system like better camer and some stuff shwoing better *
Credits to original authors of apps
i only moddified them
Greetings,
Team BroadcmCM
I do not have computer now but i download the rom and how can i flash the kernel by cwm?
Sorry about my bad English
i am having device ace-i and also working ADB connection in my mac
so i can help you
SpaceCaker said:
Biel ive got 3 friends with ace i
Ive already loned thos phone before to install custom roms
Maybe i can lone it again and give u the files u need
Currently having linux mint 14 nadia installed
Adb installed and a full android workspace installed
Only problem is i will talk to them next week because they are on vacation
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Nice to see u here buddy but I solved my problem taking files from the stock rom which is the same I musy update first post
Sent from my Nexus 7 using Tapatalk HD
bieltv.3 said:
Nice to see u here buddy but I solved my problem taking files from the stock rom which is the same I musy update first post
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Ohh ok
Sent from my GT-S5830 using xda premium
bieltv.3 said:
CyanogenMod 7 for Galaxy ace i s5830i aka cooperve (REMEMBER THE 'I')
So, I currently don't have the device, but I'm waiting for it, anyway we probably now that broadcomm has release the drivers of HW and a framework patch, we already had a port of CM7 for our device, but this is compiled from scratch (source).
Status:
Modifying source, to be able to build it,
Having some issues with vendor... Dunno why...
Our github: this will be our github: https://github.com/broadcomCM
All credits go to whiteXP and his Galaxy y
Click to expand...
Click to collapse
I didnt understand is dis d drivers or u r porting dis rom like every one here ??
Sry but i am not so pro it dis things
Sent from my GT-S5830i using xda app-developers app
whisper_ said:
I didnt understand is dis d drivers or u r porting dis rom like every one here ??
Sry but i am not so pro it dis things
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Not porting building from source with drivers
Sent from my Nexus 7 using Tapatalk HD
Originally Posted by whisper_
I didnt understand is dis d drivers or u r porting dis rom like every one here ??
Sry but i am not so pro it dis things
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Not porting building from source with drivers
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
U mean dey realeased d drivers????
Yabboooooooooog!
Sent from my GT-S5830i using xda app-developers app
bieltv.3 said:
Not porting building from source with drivers
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
highly appreciate the effort man! Building from source will also remove little problems (like in display) that occur while porting the galaxy-y rom!
You are getting close guys keep it up. I'd happily join in but i have had to give my phone to the girlfriend permanently so i cant really afford to get anything wrong xD..or i would
Great!
whisper_ said:
U mean dey realeased d drivers????
Yabboooooooooog!
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Broadcom has released a test binary just yesterday
http://madteam.co/forum/general-77/(dev's)(broadcom)-open-dialogue-with-broadcom/msg76394/#msg76394
Lets hope the "final" version don't take much more time...
grt news :laugh: thanks a lot for ur efort :good:
FInally! starts building )
bieltv.3 said:
FInally! starts building )
Click to expand...
Click to collapse
YAY!! :victory: BTW cinnamon and gnome2/3 are better than s***ty unity
we are ready to help you if you want
Thank you very much for dedicating time building a proper cyanogen for cooperve
The status of this device is very sad at the moment but I can see it improving in a couple of months
status updated
Rom bases on AOSP by @Faryaab, so you can expected all advantages and disadvantages of the base.
Changelog:
MIUI v5 Changelog EN | MIUI Official
Android:
4.2.2 (JDQ39E)
Bugs:
there is no blur (in: folders only)
[*]disposable fc in twitter app after installation
[*]call recording
Important:
do not use bugreport to send reports to miui (they won't get it), copy and paste FC logs in here instead
[*]compatible kernels are: the one provided with rom (test others on your own risk!)
Installation:
do full wipe and wipe dalvik cache (only the first time)
flash miuigalaxy-v5-sgs3-3.x.x-4.2.zip in recovery
Tweaks:
init.d support
disabled Scrolling Cache
you can receive MMS w/o active mobile connection
on screen buttons (adjustable in control panel)
statusbar layout (adjustable in control panel)
text messages in unicode
possibility to adjust vibration/haptic level
possibility to change carrier name
gestures control - something like moves in samsung's roms
CRT-OFF
ViPER4Android FX
Gapps included
Video:
Download:
ROM EN: Galaxy S3 MIUI v5
Credits:
Acid - for translating miui to my native language and whole the help
[*]MIUI - for patchrom
[*]faryaab - for base
[*]artit - for blur hack
[*]7OH - for control panel
Perfect gone try it. Great
Sent from my GT-I9300 using xda premium
Downloading! TNX!
Thanks! Downloading, will report later
At first look this rom is daily driver!
- great free memory 500MB
- stock S3 camera
- tethering - WORKS!
- very smoth!
- xperia keyboard
- all what you need already inside!
more testing to come... :good:finaly JB 4.2.2 MiUi rom that i like!
Looks like a promising miui finally...any chance for multi-lang version?
Edit: i just tested this rom.everything work really good.its nearly perfect for daily use.but there is little problems that keeps me away from this beatiful rom.first thing is there is no multilanguage support.it would be really good to use this rom with our own language.second thing is samsung camera.you can take pictures but camcorder is not working.picture quality is same as google camera applications quality.its too early to talk about battery performance but it seems decent after 1 hour heavy usage(56 minutes screen on time with boeffla kernel %96-%88).
İ cant see any other major problems at all... if you dont mind using a rom with only english support and if you want to use miui rom with good performance you should try this rom immediately.but i still think multilanguage support shouldnt be so hard for a good developer like this roms developer...peace (Y)
direct wifi work or not ???
nomaj said:
At first look this rom is daily driver!
- great free memory 500MB
- stock S3 camera
- tethering - WORKS!
- very smoth!
- xperia keyboard
- all what you need already inside!
more testing to come... :good:finaly JB 4.2.2 MiUi rom that i like!
Click to expand...
Click to collapse
Thanks for the helpful review. Gonna try it now.
@mckenji it is not handy at all to add multilang building with patchrom (xiaomi's sources), however we can ask @ingbrzy for help with that and camera is going to be replaced, for now any other app from play store will work
nomaj said:
At first look this rom is daily driver!
- great free memory 500MB
- stock S3 camera
- tethering - WORKS!
- very smoth!
- xperia keyboard
- all what you need already inside!
more testing to come... :good:finaly JB 4.2.2 MiUi rom that i like!
Click to expand...
Click to collapse
I wonder you get the 500 free memory on 1st boot.. go ahead & let install more apps as depending your usage in routine then tell the free memory.....
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Thanx ZduneX25 for starting this new MIUI rom but we & i was using ihacker's rom which he has started recently too. So if you would add the more & mods customizations,tweaks,mods,fixes according to user's reviews then it would be great & keep on mentioning your new changelogs separately except MIUI official changelogs that what you added,changed or fixed in your rom. Thanx again for this rom.
mrjoy said:
I wonder you get the 500 free memory on 1st boot.. go ahead & let install more apps as depending your usage in routine then tell the free memory.....
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Thanx ZduneX25 for starting this new MIUI rom but we & i was using ihacker's rom which he has started recently too. So if you would add the more & mods customizations,tweaks,mods,fixes according to user's reviews then it would be great & keep on mentioning your new changelogs separately except MIUI official changelogs that what you added,changed or fixed in your rom. Thanx again for this rom.
Click to expand...
Click to collapse
OK... look on Ihackers rom thread... i posted a shot and tutorial how to get that amount of memory.
But here i get that memory without tricks... so try... and speeak later...
mrjoy said:
I wonder you get the 500 free memory on 1st boot.. go ahead & let install more apps as depending your usage in routine then tell the free memory.....
---------- Post added at 12:28 PM ---------- Previous post was at 12:19 PM ----------
Thanx ZduneX25 for starting this new MIUI rom but we & i was using ihacker's rom which he has started recently too. So if you would add the more & mods customizations,tweaks,mods,fixes according to user's reviews then it would be great & keep on mentioning your new changelogs separately except MIUI official changelogs that what you added,changed or fixed in your rom. Thanx again for this rom.
Click to expand...
Click to collapse
I can repack this rom with all the iHackers' stuff including all the mods, tweaks, customizations, addons etc. and make an Aroma or Minimal Version of this rom too (Ofcourse if @ZduneX25 allows me to), by the way the iHackers' Addons Pack should work with this rom too. Just remember to replace the kernel in the zip with the one thats supported for this rom and don't use the on screen buttons options as it will replace the build.prop of this rom with iHackers' and everything else would work perfectly fine.
@ZduneX25 IMO It would be great if you and @iHackers work together, Let me know what you think about it.
Sumedha Kapoor said:
I can repack this rom with all the iHackers' stuff including all the mods, tweaks, customizations, addons etc. and make an Aroma or Minimal Version of this rom too (Ofcourse if @ZduneX25 allows me to), by the way the iHackers' Addons Pack should work with this rom too. Just remember to replace the kernel in the zip with the one thats supported for this rom and don't use the on screen buttons options as it will replace the build.prop of this rom with iHackers' and everything else would work perfectly fine.
@ZduneX25 IMO It would be great if you and @iHackers work together, Let me know what you think about it.
Click to expand...
Click to collapse
Best kernel that cover booth rom versions is Googy Max (+ dual boot option). I like the idea to gather devs and make ultimate MiUi rom.
Sorry, but am not going to add aroma installer to break my whole ota updating system (that i care about), any future changes you make in /system partition will disallow you to update my rom.
ZduneX25 said:
@mckenji it is not handy at all to add multilang building with patchrom (xiaomi's sources), however we can ask @ingbrzy for help with that and camera is going to be replaced, for now any other app from play store will work
Click to expand...
Click to collapse
Thanks... Multilanguage would be A LOT appreciated! :thumbup:
Sent from my GT-I9300 using xda app-developers app
Sumedha Kapoor said:
@ZduneX25 IMO It would be great if you and @iHackers work together, Let me know what you think about it.
Click to expand...
Click to collapse
+1
ohh its great idea.... Me also want that iHacker & ZduneX25 should work togethor
Well have some bad news, as long as miuiandroid translates official rom for s3 they cannot make multilang for this one, simply because script will fail if there is two the same devices to translate.
awesome job. so far i did not have any trouble what so ever.
one question.
is there any unread count for Muiu ?
ZduneX25 said:
Well have some bad news, as long as miuiandroid translates official rom for s3 they cannot make multilang for this one, simply because script will fail if there is two the same devices to translate.
Click to expand...
Click to collapse
... but datagutt did it. Maybe you can ask to him
nomaj said:
Best kernel that cover booth rom versions is Googy Max (+ dual boot option). I like the idea to gather devs and make ultimate MiUi rom.
Click to expand...
Click to collapse
one question for you my friend @nomaj, i've read your tips on how you can get more memory on MIUI. But can you give me the example of apk/process that i don't need? i don't really understand that part...
Team ARM Core Presents CMX11 NitroX Edition
CMX11 NitroX Edition is based on CMX11 Rom!This rom is powered with performance engines,Battery Tweaks,Audio Engines and many more tweaks and bug fixes.CMX11 NitroX Edition is the fastest cm11 say good bye to lags!
A Big Thanks to @omerdeniz99 for making CMX11! Thank you so much bro!
Thanks to @raisul2010.5396 for his modded TWRP and Samurai OC Kernel!
also Thanks to @mohammad.afaneh for makingTWRP for our device!
and Thanks to me for making NitroX Edition!
Based on 'ROM-PacMe' CM11.His Github
https://github.com/ROM-PacMe
Bugs:
No bugs Everything is working
NitroX V3 is more faster,stable and fully bugless
Features of NitroX V3:
1.Camera Fully Working
2.Video Recording Fully Working
3.Media Scanner Fully Working
4.Google Apps Fully Working
5.Download Manager Fully Working
6.Emojis are fully working(Use the keyboard)
7.Video playing fully working and smooth upto 340p(Use Software Decoder in MX Player)
8.Super Smooth and Fast
9.System 30MB Free
10.All languages are supported
NitroX V3 Download Link: http://www32.zippyshare.com/v/5Eg0N4xd/file.html
GApps Download Link: https://forum.xda-developers.com/devdb/project/dl/?id=20183(GApps can cause heavy lags :/)
Video Recording Instructions:
Steps:
Firstly fix the recording app bug by following below steps:
1.Copy video recorder.apk from system/priv-app to sd card
2.Delete the apk from priv app
3.reboot your phone
4.install the app as user app from sd card
Now follow these steps:
1.Open the video recording app
2.Go to settings and change audio quality to the lowest level 11khz
3.App will give force close dont worry!Start the app again!Record video
4.View your video through the video recording app
NitroX V2
Changelog Of NitroX V2
1.Download manager working
2.Gapps fully working
3.New CMX Bootanimation
4.Inbuilt Ad-Blocker
5.All useless system apps removed
6.System 35MB Free
7.All indian languages supported
8.Fully Optimized and Boosted
9.Super responsive and liquid smooth UI
10.Performance and Battery tweaks added
NitroX V2 Download Link: NOT AVAILABLE
NitroX V1:
Features:
1.Ultimate Performance Engine Installed(Thread:- http://http://forum.xda-developers.com/android/software-hacking/mod-ultimate-performence-blazing-fast-t3482317)
2.Fully Zipaligned
3.Fully Sqlite optimized
4.Full MDPI framework for better stability
5.Support for Indian Languages(Hindi and Marathi)
6.All useless apps removed(System 20MB Free)
7. 2 New audio engines installed(Pure Audio 2.0 and Extreme Beats Aural Maximizer)
8.New Viper4Android(Thread:- http://forum.xda-developers.com/showthread.php?t=2191223)
9.Fast CM11 Trebuchet launcher added
10.Stable Camera(Can't conncect to camera issue fixed)
11.CM11 S new colored lockscreen
12.Samurai OC Kernel Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/dev-samurai-kernel-samsung-galaxy-ace-t3490339)
13.Latest TWRP 3.0.2.1-b1 Added(Thread:- http://forum.xda-developers.com/galaxy-ace/s5830i-develop/recovery-twrp-2-8-7-0-touch-recovery-t3463050)
14.Viper4Android audio build.prop tweaks added
15.Kernel Adiutor Mod added
16.New sound recorder added
Download Link:
https://drive.google.com/open?id=0B7ixwTfUzsa6X2hJTHVhZ2hiVUk
Sim Unlock Troubleshoot
Steps:
1.Flash stock rom via odin
2.Root the stock rom
3.Install Galaxy Toolbox app
4.Unlock your galaxy using the app
INSTALLATION:
FIRST FLASH THIS MODEM (for fix sim bug) AND TEMPORARY RECOVERY VIA ODIN (clockworkmod 6.0.1.2)
DOWNLOAD MODEM
https://www.androidfilehost.com/?fid=24566454284190169
DOWNLOAD RECOVERY
http://forum.xda-developers.com/devdb/project/dl/?id=18641
After falshing of recovery and modem are done flash this CWM 6.0.5.3 by rebooting to recovery using 3-button combo
DOWNLOAD CWM 6.0.5.3
http://forum.xda-developers.com/devdb/projvect/dl/?id=18698
After flashing of CWM done then go to Advanced and select Reboot Recovery.It will reboot you to the new CWM recovery.Now go to Mounts and Storage then Format system,data,cache,sd-ext.Next Install the ROM from sdcard using ClockworkMod Recovery
After installation done Flash Fly On Mod for performance and battery boost.Download Here:
https://forum.xda-developers.com/showthread.php?t=2226373
Petformance Tips:
1.Enable Developer Options by tapping the build number.Disable all window animations in Developer.
2.Enable KSM from memory management option in performance tab at settings
Give me a Thanks if you like my work
If you get installation errors then follow below steps!
1.Flash boot and modem via odin
2.go to recovery mode and flash cwm 6.0.5.3 then go to advanced reboot to recovery
3.Format system,data,cache
4.Mount system,data,cache
5.Install the rom
6.Reboot
My personal Performance Boosting Suggestions:
1.Disable all animations
2.Enable KSM via kernel adiutor
3.Enable very aggressive low memory killer via kernel adiutor
4.Use the prevent running xposed module to prevent auto start of apps
:good: keep going man , hail team arm core
raisul2010.5396 said:
:good: keep going man , hail team arm core
Click to expand...
Click to collapse
hail team arm core
good work bro
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
boby123 said:
Screenshot?,play store work?,good bro
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
screenshot is same.as cmx11 so i dont attached and download manager bug dont fixed it so playstore wont work
omerdeniz99 said:
good work bro
Click to expand...
Click to collapse
hail team arm core
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
-=Guybrush=- said:
Great work, thank you! Reading the changelog, I see that almost all the issues connected with the CMX11 Snapshot 9 I've underlined are solved apart from the one with the download manager and, maybe, the very slow reaction of the screen when an alarm is ringing or a call is incoming. Maybe I'm mistaken and it is solved too? That would be great!
Unfortunately by now I haven't a cooperve at hand to test the rom myself (the one I work with is my fiancee's and it is quite hard to get hold of it) but I plan to do it ASAP. I don't know if I would be able or not but don't hesitate to tell me if there is something I could do (or at least try to do) to help you with the issue with the download manager. Have a good day and thank you again for your great work!
Click to expand...
Click to collapse
i have added samurai oc kernel it is designed to reduce the screen on delay.Im telling you some tweaks that will help you to get rid of screen delay 1st disable all animations 2nd force stop all user apps using prevent running xposed module
honestly we dont have a 100% working solution for the screen on delay we are working on it maybe in next update it will be fixed
and the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
sohamsen said:
the downlod manager is not working till now i tried everything like extracting from other cm11 builds and also from other device's cm11,i tried setting correct permissions and pushing apks to app/priv-app nothing worked we are working on it to fix this
Click to expand...
Click to collapse
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
-=Guybrush=- said:
What you describe here has been more or less the path followed by me when I've tried to solve the issue with the snapshot 9, to no avail unfortunately. The issue with the download manager has been introduced in the snapshot 9: if I remember well (but I'm almost certain about that), everything was fine on that side with the snapshot 8 and this could help with tracking down the source of the issue (I know that with words everything seems simple while it actually isn't! ) though omerdeniz99 certainly know that better than anyone else being him the mantainer of that project.
For what concerns the screen wakeup delay, I'm sure things would be better with your last modifications and I would follow your advices as soon as I would be able to test your rom. Thanks!
Click to expand...
Click to collapse
ok i will try next build with the v8 base
h1229m said:
Bugs :
WIFI doesnt work
compass doesnt work
hostspot doesnt work
I used this rom
"ACERom Build 2"
wifi works but hotspot and compass doesnt work on above ROM , And that ROM is very slow
also it can't unlock , locked SIM
video Recording is not work !
let me say honestly , It is unstable ROM
Click to expand...
Click to collapse
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
sohamsen said:
flash stock rom via odin then use galaxy toolbox and unlock ur sim then follow the steps and install cmx nitox then install samurai oc kernel
Click to expand...
Click to collapse
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
sohamsen said:
ok i will try next build with the v8 base
Click to expand...
Click to collapse
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
h1229m said:
Video Recording Not working Also
Click to expand...
Click to collapse
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
I was wondering about one thing. One of the main changes between cmx11 v9 and v8 was the replacement of the previous browser with UC Browser. It uses a built-in download manager and this could be the cause for the issue with the download manager (probably, something more than the browser alone was removed and/or modified to take advantage of that) but I remember that I had tried to replace it with the previous solution, restore all the dependencies and permissions but this didn't fix the download manager... Maybe I had missed something or failed with one of my modifications, it is certainly possible.
Again, omerdeniz99 is the one who knows for sure what's going on, let's hope his exams will go the best way possible and when he would have spare time for his projects again I'm sure we would receive news from him.
h1229m said:
I Did ! I install ROM and samurai oc kernel
Hostspot is working , But Wifi not working !!!
Video Recording Not working Also
Click to expand...
Click to collapse
WiFi should work
ok then go to aroma installer of samurai kernel then choose stock instead of samurai
-=Guybrush=- said:
It could be a valid idea but please be adviced that now I don't remember what (too much time has passed since I've tested it) but the v8 had some other issues (quite annoying I remember: if I remember well, one was the camera which was even worse than the one included in v9 but this isn't a problem since you've completely replaced it) which forced me to update to the v9 as soon as it was released.
Missing video recording capability is a known issue since the first versions of CMX11 indeed this is underlined in the features list for it and a workaround is suggested. I may be wrong but I think it could be due to something from Broadcom being still closed source.
Click to expand...
Click to collapse
i will also update the cmx nitrox after my exams