GT-S5830C/i/M - ROOT, UNROOT, FW BACK-UP, FW RESTORE and FW UPDATE! - Galaxy Ace S5830i General

HOW TO ROOT GT-S5830C/i/M
----TO ROOT----
1. copy the file ROOT-S5830C-i-M.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER
3. apply the update file ROOT-S5830C-i-M.zip from sdcard and reboot.
----TO UNROOT----
1. copy the file UNROOT-S5830C-i-M.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER
3. apply the update file UNROOT-S5830C-i-M.zip from sdcard and reboot.
HOW TO MAKE THE PARTIAL BACKUP OR FULL BACKUP OF FIRMWARE.
-ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-
CWM Recovery WORKING! not fleshable version, on reboot it back to stock recovery!
put file in your sdcard and run in original recovery same as apply update!
USE TO PARTIAL BACK-UP and RESTORE you ROM!
-Full backup with CWM to ODIN format.-
1. Copy both files ClockWorkRec_S5830C-i-M.zip and CWM_BackUP_FW_ODIN.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER.
3. Apply the update file ClockWorkRec_S5830C-i-M.zip from sdcard.
4. Apply the update file CWM_BackUP_FW_ODIN.zip from sdcard and wait the copy and generation of FW.
HOW TO UPDATE OR RESTORE FIRMWARE IN GT-S5830C-i-M WITH ODIN3.
To get stock FimWare go to FirmWares Stock SamSung if you phone model and operator is not listed go to FirmWare Checker and PUT your phone details, after minutes, You FirmWare stay available.
-To get phone details-.
*2767*4387264636# - viewer the product code.
*#1234# - viewer the PHONE PDA CSC versions.
-Sample of required details in SamFirmWare.com FirmWare checker-.
Product Code = GT-S5830OKCZTO
PDA = S5830CVJKL4
CSC = S5830CZTOKL4
PHONE = S5830CVJKL4
Sample of Check Fus Downloader, to download firmware direct from samsung servers!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To flash the FirmWare is needed SamSung drivers installed and the ODIN3 v3.07.
Turn off the PHONE, press and hold VOL-UP + VOL-DOWN + POWER
select download mode in screen and start ODIN3, inside ODIN3 select your files, PIT, BOOT, PHONE, PDA, CSC, the BOOT file not needed!
If you have only one file xxxx.tar.md5 put into PDA.
Only leave selected the checkbox, reboot and Factory reset.
Just press START!
Thanks all.

get config from kernel using adb pull /proc/config.gz
so we can compare hardware differences.. or use some hardware info app to see the changes from ace

madman_amit said:
get config from kernel using adb pull /proc/config.gz
so we can compare hardware differences.. or use some hardware info app to see the changes from ace
Click to expand...
Click to collapse
adb report = file not exist.
Hw info in first post!

The same as s5830i

looks like samsung love to revise galaxy ace to never revision number.
previously we got gt-s5830i, now this the gt-s5830c. maybe their improve something under the hood to make it better than original generic gt-s5830. so hows the battery life? it it crappy?

an0nym0us_ said:
looks like samsung love to revise galaxy ace to never revision number.
previously we got gt-s5830i, now this the gt-s5830c. maybe their improve something under the hood to make it better than original generic gt-s5830. so hows the battery life? it it crappy?
Click to expand...
Click to collapse
The battery lasting up two days. in my use.
In my work the FM radio is always on.
And when I'm home I browsed through a Wi-Fi
When in idle the line of battery drain is still not declie this is incredible.

ickyyy said:
The same as s5830i
Click to expand...
Click to collapse
What version of the ODIN S5830i use?
Tell me the version I'll try, if not detect my phone can not be the same S5830i.
Thanks

Hardware is the same..s5830i uses Odin v1.85

Yup, this is S5830i its codename is cooperve
and there is no such thing as S5830C

Gpu vendor - Broadcom wtf ?
Sent from my GT-S5830 using xda premium

Yes, this is my galaxy ace, and I cant find any firmware for it, only one russian firmware.
Thats the firmware- http://depositfiles.com/files/hgyvm22bd
I cant flash any custom rom of this forum.
Regards

sorry for being a newb..but what is this? is this an official rom?

tohno said:
sorry for being a newb..but what is this? is this an official rom?
Click to expand...
Click to collapse
Its a russian stock firmware and supports an updates to way ota ( 14,04 mb )

There are no custom ROM's for s5830i...and we're waiting for a new software update from samsung because many 3D games don't work and the GPU is not working at full.

pato66 said:
Yes, this is my galaxy ace, and I cant find any firmware for it, only one russian firmware.
Thats the firmware- http://depositfiles.com/files/hgyvm22bd
I cant flash any custom rom of this forum.
Regards
Click to expand...
Click to collapse
Thanks for more details of this model!
Do you applied this rom on your phone? which used odin? used some additional file?
Here in Brazil has made ​​cases of cell blocks after they tried to apply the CWM Recovery and another method of ROOT!
thank you!

Rafael.Baugis said:
Thanks for more details of this model!
Do you applied this rom on your phone? which used odin? used some additional file?
Here in Brazil has made ​​cases of cell blocks after they tried to apply the CWM Recovery and another method of ROOT!
thank you!
Click to expand...
Click to collapse
yes, I install thats firmware from odin 1.85 because 4.38 dont reconigzed the phone.

ickyyy said:
There are no custom ROM's for s5830i...and we're waiting for a new software update from samsung because many 3D games don't work and the GPU is not working at full.
Click to expand...
Click to collapse
Sorry, that it aint goin to happen, the phone seems to not have actual GPU for 3D processing.
VideoCore IV HW seems to be a software based renderer,and renders using CPU processing

It doesn't even have a dedicated GPU
Herpderp Defy.
Holding on to what I haven't gooooooooooooooooooot

I have writen an e-mail to samsung support center and they answered that s5830i is better than s5830 but there is no software for s5830i.So the phone is not using all of it's power.The VideoCore IV HW is better than the adreno is they said.

The VideoCore IV BCM2763 processor improves on the VideoCore III with support for 1080p encode and decode, along with higher resolution camera support and faster 2D and 3D graphics, all at very low power.
but but as armv6 is still there no real use of this improvement
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
Rafael.Baugis said:
adb report = file not exist.
Hw info in first post!
Click to expand...
Click to collapse
as you are rooted can you look in that path using some root file manager ?? it exists in all linux based devices so it must be there

Related

Official GB 2.3.6 for Indian Galaxy Pop + Root Access

Official Firmware for indian Galaxy Pop has been released and you can get it on your phone right away via Kies or manually.... This is a totally new update for Indian Galaxy Pop users.
With this GB 2.3.6 you have following features...
There is not much change in UI.. Only some icons and apps (Music) is changed.
Performance is greatly improved.
Your device can now render Devanagari scripts (Hindi, Nepali ) and probably other Indic languages.
Battery performance is also better with better task management.
Many small features added and upgraded to provide best user experience.
How to get it on your Galaxy Pop?
1. Upgrade via Kies (not recommended)
OR,
2. Flash it manually in Odin (One package option) after downloading the rom from http://hotfile.com/dl/136955738/5aa97f4/GT-S5570_INU_S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7.rar.html
Password is : sampro.pl
Disclaimer: Do it at your own risk!
For a complete Guide on How to FLash this rom on your Galaxy Pop Visit this link:
http://yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
To view some screen shots of this rom on my galaxy pop visit this link:
http://yagyagaire.blogspot.com/2011/12/screenshots-of-gignerbread-236-on-my.html
Happy Flashing
To root your phone follow this link or continue reading below...
Want to root your newly updated Galaxy Pop GTS5570?
Disclaimer: Rooting Void's Your Warranty. Also, Do it at your own risk.
1. Download the gingerbread-2.3.6-root.zip file from my drop box.
Code:
If you don't have [URL="http://db.tt/ioWX13te"]Drop box account [/URL]yet then
[URL="http://db.tt/ioWX13te"]signup now from this link[/URL]
to get extra 250 MB free along with regular 2 GB cloud storage. :)
2. Flash it in CWM recovery using 'Apply zip from sdcard' option.
That's it. You have rooted your GB 2.3.6.
For a Detailed Guide on Rooting Samsung Galaxy Pop gts5570 running Official Gingerbread 2.3.6, follow this link to original article:
http://yagyagaire.blogspot.com/2011/12/rooting-samsung-galaxy-pop-with.html
Here's a screenshot showing superuser app on GB 2.3.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enjoy!!!
I installed this ROM today. Look wise, its all same as in with 2.3.5 or any GB Stock ROMs.
But I'm really annoyed with the battery icon since GB 2.3.3, i felt too odd.
But see this icons :-
http://attachments.xda-developers.com/attachment.php?attachmentid=790264&d=1321886500
Its too cool, and its incorporated in EmanoN, CM7 etc. Why not in Stock ones!!
This is Good. Thanks
Does this rom have arabic language?
gonna try this
Sent from my GT-S5570 using xda premium
yagya said:
Reserved!
Click to expand...
Click to collapse
Wrong post Sorry! The original post is below the first post.
yagya said:
Official Firmware for indian Galaxy Pop has been released and you can get it on your phone right away via Kies or manually.... This is a totally new update for Indian Galaxy Pop users.
With this GB 2.3.6 you have following features...
There is not much change in UI.. Only some icons and apps (Music) is changed.
Performance is greatly improved.
Your device can now render Devanagari scripts (Hindi, Nepali ) and probably other Indic languages.
Battery performance is also better with better task management.
Many small features added and upgraded to provide best user experience.
How to get it on your Galaxy Pop?
1. Upgrade via Kies (not recommended)
OR,
2. Flash it manually in Odin (One package option) after downloading the rom from http://hotfile.com/dl/136955738/5aa97f4/GT-S5570_INU_S5570DDKQ7_S5570ODDKQ6_S5570DDKQ7.rar.html
Password is : sampro.pl
Disclaimer: Do it at your own risk!
For a complete Guide on How to FLash this rom on your Galaxy Pop Visit this link:
http://yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
To view some screen shots of this rom on my galaxy pop visit this link:
http://yagyagaire.blogspot.com/2011/12/screenshots-of-gignerbread-236-on-my.html
Happy Flashing
To root your phone follow this link or continue reading below...
Click to expand...
Click to collapse
nice tutor
squadzone said:
nice tutor
Click to expand...
Click to collapse
Thanks You...
I guess I should keep tutor prefix on my name
Really lol! You keep doing/developing cool things... I keep distributing them with proper instructions on how to use them
Don't believe me? Check out the link in my Signature below or follow this link at http://yagyagaire.blogspot.com/search/label/Samsung Galaxy Pop/Mini GTS5570
is there any app like s2e or a2sd that can support this ROM or nay stock rom.. im using it right.. not bad...smooth
is the multitouch problem solved in this rom?
How to unroot...? If there is zip for that plz provide... Or give link.........
Sent from my GT-S5570 using XDA App
Does it sappourt Arabic language
Sent from my GT-S5570 using XDA App
lokeshtak said:
How to unroot...? If there is zip for that plz provide... Or give link.........
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
I have provided both zip and links below my 1st post....
Here's is it once again. FOllow steps there to root your 2.3.6 http://yagyagaire.blogspot.com/2011/12/rooting-samsung-galaxy-pop-with.html
abdallh222 said:
Does it sappourt Arabic language
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
I don't know. However, it seems it doesn't support it since I couldn't find Arabic language in Locale and text settings.
elixdragon said:
is the multitouch problem solved in this rom?
Click to expand...
Click to collapse
Was there a multitouch problem with GB?? I don't know but probably multitouch problem is probably solved.
Try it
my phone is stuck at samsung blinking logo
maur31 said:
my phone is stuck at samsung blinking logo
Click to expand...
Click to collapse
After Odin says pass, remove your phone then, go to recovery mode and wipe data/do a factory reset. ANd then reboot your phone everything will be fine.
yagya said:
After Odin says pass, remove your phone then, go to recovery mode and wipe data/do a factory reset. ANd then reboot your phone everything will be fine.
Click to expand...
Click to collapse
Can we use dta2sd script with this ROM... I have rooted my phone and installed CWM 5 thro odin.... dta2sd doesn't seem to work with this ROM or does it...?
ManishGade said:
Can we use dta2sd script with this ROM... I have rooted my phone and installed CWM 5 thro odin.... dta2sd doesn't seem to work with this ROM or does it...?
Click to expand...
Click to collapse
no, dta2sd is for custom roms and it doesn't work in stock roms. It also requires init.d script support that is also not available in stock rom. So, only way to use a2sd is to use a2sd app from market or Install Manager Pro v3.2 or similar apps.
yagya said:
no, dta2sd is for custom roms and it doesn't work in stock roms. It also requires init.d script support that is also not available in stock rom. So, only way to use a2sd is to use a2sd app from market or Install Manager Pro v3.2 or similar apps.
Click to expand...
Click to collapse
Thanks yagya for kind reply... you have made the flashing process super easy... I keep referring to your blogspot... Nice & very easy... I have flashed this ROM (Official) and it is very good I must say.. till now using CM7 RC4 by squadzone .. can we use Link2sd if we have ext3 partition everytime I run link2sd it says script can not be mounted .. How to mount ext3 partition after boot.

[ROM] Cason Galaxy Note 1.02 based on HK Official KK1

Hi Guys, I have been using this ROM for about a week now and I felt that it is stable and zippy for my daily use and hence would like to recommend it to you guys.
Please note that this is NOT MY WORK. All credits should go to the creator Cason From XDA.CN
--- Hong Kong version of the latest 2.3.6ROM N7000ZSKK1 based on extensive optimization
--- Combined ODEX, optimize all APK
--- Baseband N7000XXKJ6
--- Adding the latest complete permanent ROOT
--- Integrate the latest version of busybox
--- Optimized script for CWM
--- Updated with the latest version of the Samsung APPS
--- Updated with the latest version of the market 3.3.12
--- Updated with the latest version of Gmail 2.3.5.2
--- Updated with the latest version of Google Maps 6.0
--- Updated with the latest version of Flash Player to 11.11
--- Original kernel, boot without an exclamation point triangle
--- Fixed GPS data toggle switch button conflict
--- Fixed contacts, text messages and other restrictions, remove the desktop icon text shadows
--- Fixed call hold function
--- Modify the official weather widget to translucent version (see the clear transparent characters)
--- Modified battery meter to white pointer full-motion (accurate percentile 1)
--- Optimized GPS files, positioning faster and more accurate
--- Modify the official font for the quasi-circular font Cason Queen
--- Extract the latest version of the Chinese input method
--- I joined the RE modified the latest version of Samsung icon manager special edition
--- Adding the latest Samsung dedicated navigation software (XX perfect use)
--- Adding a key to cleaning up ad
--- Added MIUI compass (compass is best to use numerous)
--- Added the latest version of Vlingo voice
--- Added call recording
--- Added a quick restart
--- Removed some official wallpaper
--- Added "my private beach 3D" dynamic wallpaper for I9220
--- Default ringtone is Samsung1, the default SMS tone is Samsung2, add iphone alarm bell for the Samsung3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1 Download the Galaxy Note Rom by Cason.zip copied to the phone built-in SD card root directory
2 phone off hold the volume + HOME + POWER on the phone to enter CWMRecovery mode
3 Choose: install zip from sdcard to confirm
4 Select: choose zip from sdcard to confirm
5 found: Galaxy Note Rom by Cason.zip confirm
6 Select yes Galaxy Note Rom by Cason.zip confirm this step may be time will be longer, please be patient
7 Wait for completion of the main menu, press the Return key to return
8 Select the reboot system now restart
Download link
http://115.com/file/cl0xn89h#
http://www.multiupload.com/JIOL0MGFPB
*Please note that as this ROM is based in China, you might need to modify the GPS.conf files to your region for better GPS performance.
* I have attached the latest modem file from KL1. I find that it works very well with the ROM. Please extract and flash it with ODIN.
Thanks
language only chinese and england
Call record is default on KK1
Good work
faby71 said:
language only chinese and england
Call record is default on KK1
Good work
Click to expand...
Click to collapse
Yes, I think the ROM is only English and Chinese. It's not my WORK. I just translated it from another forum.
Any Battery tweak on this rom?
Can anyone could help me out?
I really need some help!!!
As I brought a Samsung note from china, and ask my friend bring it to me.
But I need to make it like the one brought in HK.
As thr current china version could not works good as HK version.
I just could notr run the files that I download
I place those file into the phone's memory.
Help~~~~
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
As I* just could not:
- phone off hold the volume + HOME + POWER on the phone to enter
HELP please~~~
Leechoonhwee said:
Yes, I think the ROM is only English and Chinese. It's not my WORK. I just translated it from another forum.
Click to expand...
Click to collapse
please add Turkish language
Mui9 said:
Can anyone could help me out?
I really need some help!!!
As I brought a Samsung note from china, and ask my friend bring it to me.
But I need to make it like the one brought in HK.
As thr current china version could not works good as HK version.
I just could notr run the files that I download
I place those file into the phone's memory.
Help~~~~
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
As I* just could not:
- phone off hold the volume + HOME + POWER on the phone to enter
HELP please~~~
Click to expand...
Click to collapse
You need to have CWM installed first.
http://forum.xda-developers.com/showthread.php?t=1331784
Thanks ah~
As I just don't know what to do and how to do it~~~
Would you mind to tell me what to do step by steps?
It's too hard for me..................
---------- Post added at 01:13 PM ---------- Previous post was at 12:22 PM ----------
Leechoonhwee , please help~~~~
please help
Mui9 said:
please help
Click to expand...
Click to collapse
He has already posted the XDA link :
http://forum.xda-developers.com/show....php?t=1331784
it is very simple to install recovery. just follow the instructions
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
welcome to the club new chef, hope to see more quality roms from you.
Mui9 said:
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
Click to expand...
Click to collapse
The instructions from the link on the 7th post on the first page, already link you to the most comprehensive step by step instruction for novice, and that link is active. Spend some time reading instead of just repeat asking for help. Help is already given.
Mui9 said:
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
Click to expand...
Click to collapse
the xda link is the simplest step by step instruction already. did you bother to read it in the first place
http://forum.xda-developers.com/showthread.php?t=1331784
Help
no, I had follow everything, just could not do the change.
I think need to do the cwm
but I just don't know how to do it.....
help..........
Mui9 said:
no, I had follow everything, just could not do the change.
I think need to do the cwm
but I just don't know how to do it.....
help..........
Click to expand...
Click to collapse
The link I have posted above shows you how to have CWM installed. It is already a step by step. Where which step you were stuck ? Make sure you download the right file to match your kernel
Download link up.
Google Search is not signed. As a result, can't upgrade google search from Market.
ipd98 said:
Google Search is not signed. As a result, can't upgrade google search from Market.
Click to expand...
Click to collapse
You need to remove it using titanium and then download it from the market again.
Sent from my GT-N7000 using xda premium
Hi, nice to see more options for Note users. I'm interested in getting the Samsung Dedicated navigation software and tried to search the samsung app store for it to no avail. Is it alright to request someone who is using this rom to extract the apk and upload it for all to enjoy? Thanks in advance!

[Tool] OneClickRoot - ONLINE

DISCLAIMER
Rooting devices involves dangerous procedures that might leave your phone in an unusable state if not followed to the letter. I am not responsable for you bricking your device. DO THIS AT YOUR RISK AND RESPONSABILITY
THIS IS FOR STOCK DEVICES ONLY
INTRODUCTION
Hi,this tool is intended to make the rooting process a little easier than already is however, is a work in progress and I am new to this, so I expect feedback, comments and advices as I am no dev. Thanks for the support
THE TOOL
This is a tool for rooting the International Galaxy Note (GT-N7000) only. It runs all the methods known at the moment. I have not developed anything but gather all the procesess in just one script file.
Take into consideration that this is not one click only, as the root for ICS and GB 2.3.6 need interaction with the user and in the latter case needs the use of Odin to downgrade.
Rooting Methods
Gingerbread
Version 2.3.5 is direct rootable with DooMLoRD'S easy rooting Kit (included in the script)
Version 2.3.6 is downgraded to a prerooted 2.3.5 rom (which is downloaded and pushed to the device). From there, you can flash Mobile Odin and update to any Android version you are willing.
IceCream Sandwich and JellyBean
You can choose among three choices External sdcard is required for this!!.:
1. Flashing signed zip version of Philz kernel (safe kernel + advanced recovery)
2. Flashing SuperSU in stock recovery without changing the kernel.
3. Flashing SU and busybox in stock recovery.
You can choose to root using Exynos Abuse app from Chainfire also (Not included in the script). For this method go to these threads:
http://forum.xda-developers.com/showthread.php?t=2050297
http://forum.xda-developers.com/showthread.php?t=1329360
The tool guides you through the whole process and prompts the instructions in the cmd session. The files needed to gain root access will be downloaded automatically by the script and md5sum checked. However, you need to follow instructions in order to suceed.
INSTRUCTIONS
This is a windows script only...to succeed, follow these steps:
Samsung drivers have to be installed. Install Kies in your PC to get the lastest drivers. Make sure that the phone is unplugged when you install the drivers.
Download the GalaxyNote-OneClickRoot.zip file and unzip it somewhere you can find it.
Open the OneClickRoot.cmd file as administrator (use right click over the file and run as administrator)
Enable USB debugging in the phone.
Plug the phone to the PC and just follow the instructions.
ENJOY!!
Note: The hack tools used in this script do not belong or were developed by me. I thank all the dev's and contributors that made this script possible. Thanks to:
Philz3759 for his amazing work with the kernels.
Dr. Ketan for the feedback and support.
Chainfire for his constant contributions to the GN community.
XDA for being such a great community.
All the guys in the aahkSupport IRC channel for letting be part of this community, the patience and the teaching (attn1, shad0wf0x, Anthony1s, burgd, Paxtoncamaro91, hyuh, and so many others)
DOWNLOAD
http://d-h.st/3xa
MD5sum: 16fc4b3da33cf32a45aecd58b0e1b060
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG
22022013 - Official JB Philz Kernels added.
30012013 - Rooting methods now includes flashing SuperSU no safe kernel and flashing SU + Busybox. Unroot no longer supported.
28012013 - ICS rooting process updated to flash Philz Kernel in stock recovery, Build version automatically detected.
19082012 - ICS rooting process updated to flash Speedmod or Notecore Kernels thanks to hardcore and g.lewarne.
02082012 - ICS rooting method was removed due to the discoveries in this thread (READ CAREFULLY): http://forum.xda-developers.com/showthread.php?t=1810954
26072012_v2 - Now creates the folder firmware to push the zImage file to flash kernel in Android 2.3.6
26072012 - Some cosmetic improvements.
22072012_v2 - Fix md5sum check in cf-kernel image. Added unroot support for Android 2.3.5 and ICS.
22072012 - Fix md5sum check in downgrade firmware - Need to stop drinking =)
21072012 - Added GT-N7000B model support. Fixed Root method detection for ICS.
19072012 (initial version) - solved installation of adb drivers. Supports Gingerbread and ICS versions of Android.
Just another reservation...
download not working
drnarinder said:
download not working
Click to expand...
Click to collapse
Hi, thanks for the feedback. Would you plase post the result in here please and send me the link?
http://pastebin.com/
I have an idea of what might be failing but need to check it. Thanks again...
I have already modified the code. If the issue is what I am thinking, then it should be working now...report back..regards
download is ok now
So it's basically one tool for all directly rootable GB kernels ? No more checking the kernel and downloading proper package ? Not that it was such a difficult thing, but improvements like that are amazing Next time i need to root, im gonna definitely use this stuff.
drnarinder said:
download is ok now
Click to expand...
Click to collapse
Great, just let me know how it went. Dropbox has been having issues lately...Thanks for using the tool...:good:
Akiainavas said:
So it's basically one tool for all directly rootable GB kernels ? No more checking the kernel and downloading proper package ? Not that it was such a difficult thing, but improvements like that are amazing Next time i need to root, im gonna definitely use this stuff.
Click to expand...
Click to collapse
Actually, it supports all Android versions. Direct rootable are done directly with Doomlord's tool, but all the other versions needs the user to follow instructions. Take into consideration that GB 2.3.6 needs to be downgraded first. But the downgrade firmware and the correct cf kernel are all downloaded by the script, even Odin is included...you just need to press start and follow commands, the rest in done in here.
For ICS, the files needed are downloaded and sent to your sdcard / external_sd. The phone booted in stock recovery and from there on, you have to flash the files....not 100% but don't have to look for the files and the correct thread. All the instructions are in the screen...
Hope you can test it. Thanks for the support....:good:
Nice, will test this out!
john9 said:
Nice, will test this out!
Click to expand...
Click to collapse
Thanks... just report back to know how is it going! thanks for the support...
Is it same as DoomLord's and Chainfire's rooting method with edited .bat script ?
Yep..the files are already in the script...it also has ICS rooting method as in Dr. Ketan's thread...just one script to gather all methods
Sent from my GT-N7000 using xda app-developers app
From your sig you have the exact same phones I have! (Well I have the Desire HD)
Great work and I will check this out!
blud7 said:
From your sig you have the exact same phones I have! (Well I have the Desire HD)
Great work and I will check this out!
Click to expand...
Click to collapse
Thanks man...just report back when u do...It is a pity that we won't get ICS in the DHD...but the Note is awesome...:good:
apparantly my GT N7000 is not the international version and isnt supported. bummer
beefcake5799 said:
apparantly my GT N700 is not the international version and isnt supported. bummer
Click to expand...
Click to collapse
Is your device N7000 or N7000B? that is weird, I have tested many times with my HTC and my Note and works great.
Just a favor, would you send me the following info:
Plug your phone with usb debugging on
Open a cmd in the PC
Type: adb shell getvar all
Paste the outcome as code in here or send me a pastebin link
Just to check your model id...thanks for the feedback...
beefcake5799 said:
apparantly my GT N700 is not the international version and isnt supported. bummer
Click to expand...
Click to collapse
I have added GT-N7000B support. Would you please try it now and report back? If it is failing, would you please send me a copy of the cmd session?
Thanks for the support. :good:
glevitan said:
I have added GT-N7000B support. Would you please try it now and report back? If it is failing, would you please send me a copy of the cmd session?
Thanks for the support. :good:
Click to expand...
Click to collapse
Im probably doing something wrong
The problem is that adb drivers are failing to install..that is why is failing. Let me check it when I get home. Thanks
Sent from my GT-N7000 using xda app-developers app

[Stock Official Firmwares] I9100GZCLSF (4.1.2) - China (CHN) [01-03-13]

Samsung Galaxy S II GT-I9100G Stock Official Firmwares
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These stock firmwares are brought to you by SamMobile.com
I9100GZCLSF Download (Thanks To SamMobile!)
Base Firmware: I9100GZCLSF (4.1.2)
Country: China - I9100GZCLSF
Instructions For Flashing ICS:
Extract the firmware
Open the included Odin
Put your device in Recovery MODE (Home + Volume up + Power)
Wipe Data/Factory reset
Wipe Cache
Take Out Your battery & put it back in
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Instructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
Some of the Enhancements in the new Jelly Bean Update:
Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
TouchWiz Nature UX
Samsung’s S Cloud services
New Lockscreen With Many Customization Options
New Features like Direct Call, Smart Stay and Pop-up Play
New Widgets (From Galaxy S III)
Free 50GB Dropbox Storage
2 Home screen modes
New Notification bar With More Notification Toggles
Google Now
Any differences compared to France version XXLSR ?
Sent from my GT-I9100G using xda app-developers app
nainaabd said:
Any differences compared to France version XXLSR ?
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Chinese firmwares are for Chinese phones with Chinese bootloaders
what about rooting can the phone be rooted after installing this rom
and what if people from different countries install it will it work ????
doc.saudryu said:
what about rooting can the phone be rooted after installing this rom
and what if people from different countries install it will it work ????
Click to expand...
Click to collapse
only english and china. Can be rooted. First look chinese version is faster and newer than lsr. So waiting next from india eg something else.
bsd350 said:
only english and china. Can be rooted. First look chinese version is faster and newer than lsr. So waiting next from india eg something else.
Click to expand...
Click to collapse
If you're using Chinese 4.1.2 ... So your bootloader is switched right =)
Infinite96 said:
If you're using Chinese 4.1.2 ... So your bootloader is switched right =)
Click to expand...
Click to collapse
i dont know, i just downloaded Chinese 4.1.2 and uploaded via odin 3.07 after formating all cache,data,system,emmc in recovery mode with
GT-I9100G_ICS_ClockworkMod-Recovery_5.5.0.4
my phone is from Europe. And older Chinese version i couldnt upload with odin 1.87 i tried before.
is this version got SOD or bootloop bug in stock rom?
arinsms said:
is this version got SOD or bootloop bug in stock rom?
Click to expand...
Click to collapse
This is stock rom...nothing been mod on this rom....should work well..
Hey buddy. .this is work in KST ? sorry for my question ( newbie)
Sent from my GT-I9100G using Tapatalk 2
rooting instructions ?
[/COLOR]
bsd350 said:
only english and china. Can be rooted. First look chinese version is faster and newer than lsr. So waiting next from india eg something else.
Click to expand...
Click to collapse
Can you please help me with the right link/instructions to root this version > 4.1.2 Chinese version
shivaraman said:
Hi can you plz give the rooting instructions (point to the right link) for 4.1.2 Chinese variant?
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
Can you please help me with the right link/instructions to root this version > 4.1.2 Chinese version
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2065581
It will work
How to add others languages to localize main ui in this rom. This rom doesnt support to make easy switch eg. via language enabler app.
which file is responsible for this to push him from GXEFLSR_XEF to this rom?
rooting instructions ?
hacbaoklhh said:
Samsung Galaxy S II GT-I9100G Stock Official Firmwares
These stock firmwares are brought to you by SamMobile.com
I9100GZCLSF Download (Thanks To SamMobile!)
Base Firmware: I9100GZCLSF (4.1.2)
Country: China - I9100GZCLSF
Instructions For Flashing ICS:
Extract the firmware
Open the included Odin
Put your device in Recovery MODE (Home + Volume up + Power)
Wipe Data/Factory reset
Wipe Cache
Take Out Your battery & put it back in
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Instructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
Some of the Enhancements in the new Jelly Bean Update:
Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
TouchWiz Nature UX
Samsung’s S Cloud services
New Lockscreen With Many Customization Options
New Features like Direct Call, Smart Stay and Pop-up Play
New Widgets (From Galaxy S III)
Free 50GB Dropbox Storage
2 Home screen modes
New Notification bar With More Notification Toggles
Google Now
Click to expand...
Click to collapse
Can you please help me with the right link/instructions to root this version
shivaraman said:
Can you please help me with the right link/instructions to root this version
Click to expand...
Click to collapse
Dude I gave you the link already. Please don't quote the entire op
shivaraman said:
Can you please help me with the right link/instructions to root this version
Click to expand...
Click to collapse
Download File :http://www.androidfilehost.com/?fid=9390233485161005747
Recovery MODE (Home + Volume up + Power)
Apply update from external storage
SU-BB-Installer.zip
Reboot
OK
Not included Google play?
Hi, I've updated to this firmware but I'm not able to change the CSC as mentioned, it came out an error that "connection problem or invalid MMI code". I'm from Malaysia, pls help. Thanks
NetDevil2 said:
Hi, I've updated to this firmware but I'm not able to change the CSC as mentioned, it came out an error that "connection problem or invalid MMI code". I'm from Malaysia, pls help. Thanks
Click to expand...
Click to collapse
Only support china
Sent from my GT-I9100G using xda premium

[ROMs] [Guides] TCL Idol X s950 / Alcatel One Touch Idol X

I no longer have an MTK device so there will be no new updates from me in the current thread
DISCLAIMER
I am not responsible for bricked devices, broken hearts, thermonuclear war, you getting fired because the alarm app failed, lost virgin or unfulfilled sexual partners. I also don't promise you regular seks or increase of your salary after installing this rom. It's up to you, not to me.
I dig up some ROMs i found in an old backup, so in case someone needs them here their are:
S950 S4 UI https://www.dropbox.com/s/mlfae6rco7hf7sd/TCL-S950_S4_UI_V1.3.zip?dl=0
AOSP_4.4MODv1.3.10 https://www.dropbox.com/s/q1pkrek1g19p6wz/Idol-X_AOSP_4.4MODv1.3.10.zip?dl=0
ROM AOSP Based
Android AOSP port 4.2.1 with 4.4 Look and feel
Multiple languages
and many more
New release 1.3.12
http://forum.xda-developers.com/showthread.php?t=2773735
BZzzz3 New Rom
Base - 01014 of 06/14/2014
Model - TCL Idol X
ROM makers - BZzzz3
New clean as possible ROM, modified stock with various tweaks
http://forum.xda-developers.com/showpost.php?p=53299465&postcount=470
New ROM - Idol-X S4 UI v1.5
IdolX S4 Themed v1.5
Screenshots -> http://forum.xda-developers.com/showpost.php?p=53152961&postcount=456
Multiple languages
Galaxy S4 Themed
How to ROOT
1. - Root.
In "Settings" menu you have the "Developers options" if you have it in and enable USB debugging if you have no menu " Developer options go to Settings -> About phone and press 5 times on "Build number" to make this menu visible.
Follow the instruction from here ->> http://forum.xda-developers.com/showthread.php?t=2434453
OR
Install VROOT (google it) and press the Green button ( ignore the chinese )
2. Recovery CWM Installation
i.Download https://www.dropbox.com/s/l8w8dtyqjj9td4g/recoveryCWM_TCL_S950.img OR hhttp://forum.xda-developers.com/attachment.php?attachmentid=2275351&d=1379869705
Place the file in your SD or Internal Storage
ii. Download and install https://www.dropbox.com/s/8ro1gsp04....toolbox-12d21e28b11a68788b789a9b9bbcc6ad.apk Mobile Uncle tools ( you can find it in Play Store too)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iii.and select the recovery you have download
=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=
Flash ROM without CWM
http://forum.xda-developers.com/showthread.php?t=1982587
Guide
Before flashing the ROM its recommend taking a backup with Uncle Mobile Tools, in case something goes wrong with this guide
Backup/Restore Wihout CWM
http://forum.xda-developers.com/showpost.php?p=44509214&postcount=407
*BASIC*
UNCHECK PRELOADER & MOBILE_INFO
1.- Unrar the backup to a folder.
2.- Install MT65XX drivers (Only if don´t have already installed)
3.- Run SP Flash Tools. (Windows 7&8 run it as administrator)
4.- On Flash Tools, load MT6589_Android_scatter_emmc.txt file from backup folder, by pressing "Scatter-loading" button.
5.- Unmark PRELOADER y MOBILE_INFO (Warning, it´s dangerous flash those files. Be sure unmark it)
6.- Load cutspack.img on Flash Tools by pressing on "CUTSPACK"
7.- Press "Donwload" button.
8.- Connect the phone, at power off state, to the PC and wait to SP Flash tools finish. (A pop-up with a green circle will appear when it finish)
9.- Unplug the phone from the usb and power on it into recovery mode, by pressing power on + volume up.
10.- Wipe data/factory reset & wipe cache partition, then reboot the phone.
Click to expand...
Click to collapse
Source http://www.movilesdualsim.com/threads/rom-alcatel-one-touch-6040d-rom-rusa.47027/
See here for details on how to download versions from other countries.
For TCL S950 (Dual Sim) and probably Alcatel Idol X 6040D
You must have CWM installed http://forum.xda-developers.com/attachment.php?attachmentid=2275351&d=1379869705
ROMS
Latest LeWa OS
https://drive.google.com/file/d/0B35vMeT0hNmJMHp6MTRLUEVuRFk/edit?usp=sharing
Downloads
Sim Un-Lock fix: ("sim me lock" occurs usually when you delete the mobile_ directories)
NVRAM Backup Tool thanks to @AnoopKumar
http://fs1.d-h.st/download/00085/eqF/MTK_Nvram_Tool.zip
(Original thread http://forum.xda-developers.com/showthread.php?t=2594364 )
Carliv Touch Recovery 6.0.4.4 + AROMA Filemanager (source 4pda.ru) (NO Custpack backup)
https://drive.google.com/file/d/0B35vMeT0hNmJTXZDc1lOS1ZqMGM/edit?usp=sharing
ClockworkMod recovery (CWM) 6.0.1.2 (Custpack backup)
https://mega.co.nz/#!o9UlVbID!aOJEOWJt479glvWiJo8jjn7HrutBpksePsS9AxVrsKM
ClockworkMod Recovery (CWM) 6.0.3.3
(NO Custpack backup) https://mega.co.nz/#!IpM22RCB!eqaJUlUXSGVv0cXS1BtNqzOUiotvHKiJVAEt7559oZ0
SP Flash Tool v3.1336.0.198
https://mega.co.nz/#!Yw1jmILQ!Aw-2o0Gm2kVW3ZvpRu6R9D6TZQMgm8GgKexmZRgBL7M
MtkDroidTools v2.51
https://mega.co.nz/#!8xVSnRiZ!GitIiFLuMfhnBvUPQAQIqC17_YB5n1jURyB3pxH8oHc
Mobileuncle MTK Tools 2.9.5
https://mega.co.nz/#!B0ET1J7R!SWB7LQJQJyPbNl6TYZqRiHDnE9BSvT0b38ZDNRXr2EY
VRoot v1.7.3.4388
https://mega.co.nz/#!B8t1kIBQ!M5GoQ3iqcufh4zJ1T5P2hGBE7Gp80VcnwyY8fgS5dX8
You would also need GravityBox /xposedinstaller http://forum.xda-developers.com/showthread.php?t=2316070
Google Apps
http://goo.im/gapps/gapps-jb-20130812-signed.zip
SP Flash Tools
https://www.dropbox.com/s/br8iuz2xrqcka6y/SP_Flash_Tool_v3.1316.0.150.rar
Drivers
https://www.dropbox.com/s/koiex6oj5xxjock/MTK6589%20Driver.rar
Or
https://mega.co.nz/#!9wVnDZIb!QDO8XyLag91GqFomg8j1azkln48foAHBToB1g5Yc8FA
Official , STOCK 1006 Flash with MKT tools, NOT with CWM recovery
https://docs.google.com/file/d/0B35vMeT0hNmJa3AxUHc0ZTQtSHc/edit?usp=sharing
Sources Released!!
http://sourceforge.net/projects/alcatel/files/?source=navbar
Click to expand...
Click to collapse
very great!...didn't try yet!....Any chance to remove the Chinese app?
also I noticed (only very disappointing point so far about this phone) that videos are recorded at 30fps FHD only with enough light condition (outdoor morning). If indoor (e.g. evening with artificial light) the fps drop to 16-17fps and I suspect it has to do with some exposure compensation! Is there any way to improve this? It would be amazing!....
THX....
popo72 said:
very great!...didn't try yet!....Any chance to remove the Chinese app?
also I noticed (only very disappointing point so far about this phone) that videos are recorded at 30fps FHD only with enough light condition (outdoor morning). If indoor (e.g. evening with artificial light) the fps drop to 16-17fps and I suspect it has to do with some exposure compensation! Is there any way to improve this? It would be amazing!....
THX....
Click to expand...
Click to collapse
Most of the Chinese apps are removed, i ll have to check if i missed something
cause my test phone is not available, so i haven't try the rom yet.
About the recording, it should be better after the tweaks i ve implement, but i ll search it further
RaNd.gr said:
Most of the Chinese apps are removed, i ll have to check if i missed something
cause my test phone is not available, so i haven't try the rom yet.
About the recording, it should be better after the tweaks i ve implement, but i ll search it further
Click to expand...
Click to collapse
Really Thanks!....As soon as my battery is fully charged I will install your rom and give you a feedback!....THX
---------- Post added at 08:17 PM ---------- Previous post was at 08:17 PM ----------
Rom flashing started but got Installation Aborted due to Error 6......
New version uploaded
CWM
New CWM 6.0.1.2 by gulyuk 4pda, does custpack backup.
GPS Fix for Mediatek Devices
For those with GPS issues, try this fix ->
First of all we need to donwload the “Mobileuncle MTK Tools” from Play Store and switch off the GPS. After that, we can start with the how-to:
Open the app and press “Engineer Mode”:
After that press “Engineer Mode (MTK)”:
Once you are in the Engineer mode for MTK devices, you should go to “Location” and then to “Location Based Services”:
Now, we tap on EPO and check that “Enable EPO” is enabled and then press on “EPO IDLE”:
“EPO IDLE” will change to “EPO DOWNLOADING”, so you will need to wait few minutes to download a file, I suggest that use it with a Wifi connection.
Once EPO DOWNLOADING back again to “EPO IDLE” we can press back and enter into YGPS:
In the YGPS you will need to press on “Hot”, “Full” and “AGPS Restart”:
Now that you are done test your GPS and you should find that it is faster and more precise! If you haven any questions or comments let me know in the
Source- > http://www.gizchina.com/2013/07/23/how-to-fix-poor-gps-on-mediatek-phones/
Hello, I have this phone and it catch the GPS in 4 second without any adicional application or any type of fix! Regards.
tecno321 said:
Hello, I have this phone and it caught the GPS in 4 second without any adicional application or any type of fix! Regards.
Click to expand...
Click to collapse
Yes i can confirm this..good phone!!!!!!!!:good:
Remove
Hello everybody! I confirm that this mobile it's great...I'm still waiting For the the official alcatel idol x 6040D ROM... maybe the coocker can work on that rom...
Inviato dal mio TCL S950 con Tapatalk 4
Me to... Have you got news?
Because I see video on YouTube with Alcatel idol X 6040 Rom...
Sent from my TCL S950 using Tapatalk 4
Official 1006 is out, but most users complain about issues. Try a clean install if you want to use it and the restore with Titanium Backup
Thank you but I do not want 1006 I would like the official Alcatel idol X (6040)
Sent from my TCL S950 using Tapatalk 4
nice work! im on alcatel tho
???
Sent from my TCL S950 using Tapatalk 4
Since both phones are identical with the exception of the dual-sim part, you can try the ROMs that are for S950
OK but I need French language...
Sent from my TCL S950 using Tapatalk 4
RaNd.gr said:
Since both phones are identical with the exception of the dual-sim part, you can try the ROMs that are for S950
Click to expand...
Click to collapse
im stuck at loading android....it just keep loading forever...what can i do?
Hhold volume down and power on , this should reboot your device. Or you can connect from adb, and aplly adb reboot or adb reboot recovery.

Categories

Resources