Database Develop

[Q] How do you protect your nexus? Case, pouch, invisible shield, nothing

Just was wondering what people have been using to protect their N1s now that its been out for a while, and how has it held up. I like the look of the N1 on its own without cases, and was thinking of using the little pouch that came with the box with no other case. Is this a wise move?

I have a case on my phone and an anti-glare screen protector (don't get anti glare it ruins the screen's look and colors) the reason I don't use the pouch is it gets annoying to take the phone out of my pocket with the pouch on then have to remove the phone from the pouch.
Sent from my Nexus One using XDA App

The slip case that came with the phone

Seidio Innocase works for me. See the XDA Nexus acessories section...

I've got an Otterbox Commuter series case that I use when I'm on "business" trips or at other times that my phone is likely to be handled roughly. That case is no joke. Actually, I would probably use that case all the time if I didn't use my car dock every time I drive. It takes a bit of time to pull the phone out of the case several times a day. I generally just use the slip case that came with the phone. Does a good job of fighting off scratches, and is still easy to remove so I can install the phone in a dock in just a moment.

Just a screen protector, I have used cases/covers etc, and always end up coming back to just nothing I like the slim feeling

I like the slim look also, thats why i think im going to stick with the little android pouch that came in the box. Just hope it doesnt cause any black marks on the sides or anything. Previous owner of the nexus said he never used a case but made sure nothing else was in his pocket and the phone looks brand new with no marks anywhere.
On one of my other N1s there are some dust particles under the screen on the bottom left. 1 of them is big enough to look like a dead pixel when the screen is on, the rest are not noticeable. Anyone have a easy fix to get rid of the dust? That one particle is starting to annoy me.

Ever since I lost the neoprene case, I have been going commando.

Case-Mate "Tough Case" and the screen protector that came with it.

Transparent polycarb hard-case from eBay. Beautiful and strong, but no docking possible.

Stealth guard and there pouch that came with it
Sent from my Nexus One using XDA App

codesplice said:
I've got an Otterbox Commuter series case that I use when I'm on "business" trips or at other times that my phone is likely to be handled roughly. That case is no joke. Actually, I would probably use that case all the time if I didn't use my car dock every time I drive. It takes a bit of time to pull the phone out of the case several times a day. I generally just use the slip case that came with the phone. Does a good job of fighting off scratches, and is still easy to remove so I can install the phone in a dock in just a moment.
Click to expand...
Click to collapse
I do similar: when I'm traveling, I put the N1 in my Otterbox Commuter case and enable the PIN the lock. Otherwise, no case and no PIN.

A gel skin for me.

I put a screen protector on it to cut down on sweaty fingerprints during the summer, otherwise nothing. I've had mine since it came out for ATT (march?) and it's still perfect. Just keep keys and change in the other pocket.

i'm using a silicone slip on protector. i'm too scare i'll drop it without it otherwise i would go commando but i have nerve damage in my right hand so my control over parts of my hand are sub par compared to normal people
my ulnar nerve was severed by glass and repaired but i still do not have full function of the minor muscles in my hand and only have partial feeling in the pinky/ring finger and that side of my hand so thicker phones are more comfortable in my hand and the super rubber grip around the whole thing makes it very hard if not impossible for it to slip out of my hand.

smachine said:
Just was wondering what people have been using to protect their N1s now that its been out for a while, and how has it held up. I like the look of the N1 on its own without cases, and was thinking of using the little pouch that came with the box with no other case. Is this a wise move?
Click to expand...
Click to collapse
I use BestSkinsEver (for a fraction of the cost of an InvisibleShield) protection and a horizontal leather Case Logic pouch... I used to have a silicon protector but it was a pain in the butt because it collects dust and lint like crazy!

[Q] Seidio Rugged or otterbox?...

I am having a hard time deciding between the seidio Rugged or one of the otterbox cases. I am a contractor and need a protective case badly. I have had the incredible since launch. used the case/belt clip combo from verizon store...the one that doesn't cover the ends...dumb case imo. and ended up taking that off recently to just slide phone in pocket, as that case didn't protect the phone very much at all. but the best one available at the store at launch.
I ended up having to get a replacement phone, and recieved it today. I want to be able to protect this one better.
Physical damage and dust are both a problem durring work hours.
I wish I could find these new cases at a local store to compare in person.
Has anyone seen both of these types of cases?
which do you like better, and why?
I am leaning toward the seido because of the two different cases that come with it. I like to slide the phone in my pocket on weekends.
thanks,
Jon

jon1029 said:
I am having a hard time deciding between the seidio Rugged or one of the otterbox cases. I am a contractor and need a protective case badly. I have had the incredible since launch. used the case/belt clip combo from verizon store...the one that doesn't cover the ends...dumb case imo. and ended up taking that off recently to just slide phone in pocket, as that case didn't protect the phone very much at all. but the best one available at the store at launch.
I ended up having to get a replacement phone, and recieved it today. I want to be able to protect this one better.
Physical damage and dust are both a problem durring work hours.
I wish I could find these new cases at a local store to compare in person.
Has anyone seen both of these types of cases?
which do you like better, and why?
I am leaning toward the seido because of the two different cases that come with it. I like to slide the phone in my pocket on weekends.
thanks,
Jon
Click to expand...
Click to collapse
Oh wow, your story is a direct parallel to mine! I am a mechanical contractor (HVAC/R) who also has the incredible since launch, I myself have been using the the belt clip and shell that resembles diamond plate sold by verizon, an ok case but just doesnt cut it in the trades.
A month ago I bought the Otterbox defender, while it covers the phone well and adds much better protection, the fit of the phone inside is poor, I broke the belt clip two weeks into owning it. Otterbox did replace the belt clip but the time it took was almost two weeks. Just a few days ago the little detent on the otterbox that holds the phone in the holster broke so now I'm back to square one.
Just yesterday I decided to ordered Seidio Rugged case from amazon, I never owned nor held one but I figured it would be money better spent rather than buying another otterbox. I just don't think the otterbox quality is quite there. I expect to have the new case on or around 1-06-2011 and after I get it and put it to use I will update you on it so you can make a better decision.

thanks for the response...
I have read about different peoples experiences with these different cases, and still wish I could see them in person before purchasing. I am really close to going ahead with the Seidio Rugged, and might order it today.
Jon

I'm also a contractor installing satellites and am very happy with the Seidio Rugged.
What sold me on the Seidio Rugged was the "Face In" design and the 3 layers of protection. Sure, the 3 layers adds mega thickness but doing all the "cell destructive" stuff I do, it's a very minor thing to deal with. In fact, the few times I've taken the case off, the phone felt too small and fragile.
On the second Seidio Rugged case simply because in a stupid moment just grabbed the phone and ripped it off my belt instead of taking the clip off. No idea what was thinking but needed a new clip so just got the whole thing again.
But yeah, if you use a tool belt, climb ladders, crawl under houses, or any of the crazy dirty stuff contractors do, get a Rugged.

landscape installer/maintainer here. go with the seidio. im hard on all my stuff. and i have had the rugged for 6 mo. and havent destroyed it yet. locking mech. and belt clip still work fine. and the 3 layers on the actual case is very protective.
got mine on amazon for under 40 shipped.

seidio rugged here also.. best case Ive used...

I ordered the Seidio rugged today.
looking forward to it getting it here...

My Seidio Rugged outer skeleton snapped yesterday. I wasn't applying any pressure, just taking it off and snap. So I ordered a Case-Mate Tough Case. I'm sure it will work just fine.

cuban11182 said:
My Seidio Rugged outer skeleton snapped yesterday. I wasn't applying any pressure, just taking it off and snap. So I ordered a Case-Mate Tough Case. I'm sure it will work just fine.
Click to expand...
Click to collapse
This happened to mine as well. Seidio is good about replacing it....no real need to buy a new case. At any rate I recommend the rugged case. I have dropped my phone more times than I would care to admit and this case has saved it a few times over. I figured my exoskeleton was weakened from all the drops...and I had the tendency to take it off and put it back on for no reason when i got bored. Also it looks bad *** in my opinion...

Well as I explained in an earlier post I have been using the Otterbox Defender and while it offers more protection than other cases I have used it simply seem to lack quality and convenience. I did order the Seidio Rugged case to give it a shot and to my suprise when I came home from work today my rugged case was delivered. I wasn't expecting it until 1-06-2011.
I have to say after getting my phone in it and set up my initial feelings are it appears to be a well designed case that offers very nice protection to the phone and actually adds less bulk than the otterbox. I have not used it in the field yet but I will update after a day or two in the field. But I must say at this moment I am very pleased with my decision on the Rugged case and am kicking myself in the but for not making it my first my first choice.

received the Rugged case today....
the case was in the mailbox today.
I am impressed with the case. and will feel a lot better about the protection for my Incredible phone when on the job site. When all of the case components are on the phone, it definitely adds quite a bit of bulk. That will be something for me to get use to, for sure. But, I feel that it will not be a problem.
I can totally understand how some people have accidently torn the rubber access piece off that covers the micro usb port. I hope I don't tear it off, but realistically feel that it is just a matter of time, as it is a very small piece of rubber that keeps it attached...
I really like the fact that the innocase II is the base layer. I expect that it will be my weekend case.
I thought about not applying the screen protector, due to the problems i have had in the past applying screen protectors (ie...bubbles that won't go away, dust particles, etc.)...but, decided to try it. Well, it applied better than I ever could have hoped for. I started by aligning it at the top around the ear speaker, and just smoothed it out as I let it apply itself to the screen. It fits well for the most part, but could have been just a hair longer from top to bottom.
I am excited to have this case. I only wish I had not waited this long to make myself spend the money on it.
Hopefully i will be this happy with it in the coming days and weeks...
Jon

jon1029 said:
I can totally understand how some people have accidently torn the rubber access piece off that covers the micro usb port. I hope I don't tear it off, but realistically feel that it is just a matter of time, as it is a very small piece of rubber that keeps it attached...
Jon
Click to expand...
Click to collapse
I tore the rubber camera protector flap off my rugged maybe 2 months ago now, I contacted Seidio and they had a replacement outer rubber to me within a week. They are good about replacements.
(Note I was also only a week outside of the warranty period)

Seidio Rugged is a Wonderful Case
I have had the Seidio Rugged case for about two weeks now and it's wonderful! I don't find myself using the holster much, only when I go on a run do I attach it to an armband and slip the phone in the case so I can track my runs with Cardio Trainer.
I really like the feel of the case. It makes me feel like I'm holding a more powerful phone in my hands, whereas without the case, I feel like it's just too light to perform as well as it does. lol. However, size doesn't matter as some say, and is always a personal preference.
I would definitely say get the case if you want more protection and are willing to make the phone a few millimeters thicker. I definitely worry less about my phone breaking now. My only gripe is the camera cover tends not to stay pinned back in the little restraint Seidio made for it. Beyond that, wonderful case all around and I'd recommend getting it.

lightninjay said:
My only gripe is the camera cover tends not to stay pinned back in the little restraint Seidio made for it.
Click to expand...
Click to collapse
Bloody hell!!!!
Have had this case for months and have FOUGHT that damn flap every time!! Never even noticed that little hole.... Use the flash light app every day almost to see behind peoples TV's and audio equipment and have always had to hold the flap down....
Thank you VERY MUCH for your post. Feel like an idiot, but happy to know it now.

As a construction worker, I was about to buy an Otterbox before stumbling upon this thread. Did some research, looked at a few videos, and I think I'm gonna settle for the Seidio now. Either way, both look like great cases and I couldn't go wrong with either. The Seidio on the other hand converts to a normal case when not on the job site, so that's where it wins IMO. Also, the belt clip looks better designed. Thanks XDA! You guys rule!

Cannot say I have ANY complaints about the rugged. Think about it this way: when you need it protected, you have 3 layers + a holster. If you want simple, but cased, you got the Innocase II underneath which still can hold its own as a case not to mention that it looks nice and slim also. The thing that sold me though was the holster. It comes with a lock switch which means that this baby aint never falling off. I can remove, unlock, lock, attach the phone all with my index and thumb. So easy, yet so secure.
However, I did have one gripe about this phone, and that was the covers for the USB port and the Headphone jack. It has no notches to pull out easily and it tends to get lost in the groove that it fits in to. At first, I was extremely aggravated that this happened and was worried I would ruin the rubber. BUT I found that when I pinch the sides of the case (which I totally forgot was rubber), the flaps would pop out like nothing.
So yes, the one thing that would have held me back was solved, and I am happy to report that this thing is a beast. Of course if you don't want a big thing to lug around, then don't get this, but I gotta say... it feels like a tank, and I feel secure taking this thing everywhere with me now. =D

I've had the rugged for quite a while...just to have it really. Being a social worker doesn't really but my dinc at risk. I do enjoy the feel of having it in the case when I do though, although it seems that sometimes the holster seems to catch the rubber a bit more than I'd like. I'm glad to see it seems to be a step above the otterbox.

i'm been using the ottorbox commuter and i've had no problem, i love it cause its not as bulky as other cases.

Ya definitely going with the seidio rugged case setup. I can do without the belt clip attachment though. I can see that breaking off within a week at work with me. But the rest of the case(s) are just what I'm looking for.

Thanks for the thoughts, I am in the same boat as you guys.

Seidio Surface Case on Amazon

They have these on Amazon for $10 less than the Seidio site. The case and clip combo, edited cause I didn't know if people may have thought it was just the case. Just ordered the black one. I was going to wait for the cheaper platinum branded one from Best Buy but it still shows backordered on their site. I had the same case for my Captivate and Inspire and really liked it. If you need a belt clip this is a great option.
http://www.amazon.com/gp/product/B006671MRG/ref=oh_o00_s00_i00_details

My seidio active just came in from amazon, love it, although I had to pay the full 30.

pics/review/thoughts of your active and surface cases?
I'm looking for something with at least decent drop protection. Looks like Otterbox commuter fits the bill but I thought the active looked a little snazzier.

Here's the best photos I could manage with my old LG Optimus Get ready for the long blocks of text.
Lots of pros: Case fits perfectly along with exoskeleton, no need to worry about it being loose. Makes the phone a lot easier to grip. I no longer have problems gripping the phone, in whatever position I may be standing/lying. Case made of top notch material. Exoskeleton is made to absorb shock when the phone is dropped on its corners and it seems like it does just that.
Camera is not impacted by the case at all, or at least to the point where I cant tell. Everything is cut perfectly, both on the inner shell and outer shell. Doesn't add a lot of bulk to the phone itself.
Have a problem with accidently pushing the volume buttons? Not anymore. The soft inner case is solid enough so that the volume buttons/power button (which are covered) only get pressed when you want to.
Loved the kickstand the first time I tried it. I believe it was made to lock in one position. At first, I thought it was dumb that they made the kickstand open so that the charger port was pointed down towards the table but you can just flip the phone 180 degrees and use the kickstand that way too! Should be all the viewing angles you need.
Cons: The hard exterior exoskeleton does not cover the top and bottom of the soft case. I did not get the holster with it so I do not know how the holster will affect the softer plastic but it seems extremely durable. Not sure how long the kickstand will last but seems well built so hopefully the entire lifespan of my phone. Another con is that the kickstand juts out of the case a millimeter or two so that when you have the phone flat on a table, it doesnt sit flat on its back.
Does attract a bit of lint but hardly noticeable unless under bright lights, which is how I took the pictures
Overall, very nice and durable case. Wish it was a bit cheaper than 30 dollars so if you can snag a sale, good for you! Highly recommended it. I didnt even know seidio existed before reading through these forums and looking at the opinions others gave them and I am glad I went with it! Let me know if you have any other questions.

I just got my surface case in today and it is exactly what I expected. I've had the same case on my Captivate and Inspire. There are other cases I like better but the clip is a necessity for me. Fits like a glove and doesn't add much bulk at all.
It adds a decent amount of protection but don't expect Otterbox Defender kind of protection. Though I have dropped my Captivate and Inspire numerous times with this case on and never had any damage.
Pics later when I get a chance.
Sent from my HTC PH39100 using XDA App

FYI I've had Seido Surface cases cause micro scratches on the plastic of phones before. Little pieces of dust/debris get stuck inside and the hard plastic of the phone causes it to scratch the plastic of the phone.
You can have this issue with any type of hard plastic case. I've seen it happen personally on the cheap generic Ebay cases and expensive Surface cases.

I've seen the build up but not scratches in the 3 that I have owned. But I'm also not looking for it either as I don't care if the plastic gets scratched up. I just need something with a belt clip that doesn't add much bulk and gives some protection in case of a drop.
Sent from my HTC PH39100 using XDA App

Case Suggestions

Just got my phone back from getting the screen replaced and need to find something to put it in to keep it safe! Any Suggestions?

Original HTC Desire HD Leather Case
Hi there,
when I got my NS i went to the nearby Electronics Shop and tried the cases they had. The Original HTC Desire HD leather Case fits very well...

do you have the i9020 or i9023? Any type of case you have in mind?
Sent from my Nexus S using XDA App

I really like the cases from this thread. Picked up two of them.
http://forum.xda-developers.com/showthread.php?t=1222925
Sent from my Nexus S using xda premium

The Incipio Feather Case is nice. It doesnt add much bulk, but still protects well.

Why not get a good screen protector and then run without a case. When the battery door gets to the point that its no longer attractive or you want to sell the phone buy a new battery door cover. A new battery door will cost you $7-$12 on eBay.

My Nexus has survived wars and it still looks good w/o a case. Like ^ this guy said, screen protector would suffice. I hate that extra bulk in my pocket.

I've got the trident aegis black-on-black for my NS4G (which I've had since last august) and think it's great. I had never been a "case" guy, and always kept my phones bare, but this phone was just waaaaaay too slippery. The smooth plastic back is one of the worst features of this phone and makes it really hard to hold on to if you're constantly juggling stuff in your hands and on the move. I dropped it a bunch of times in the first few days I had it before I just caved and ordered this case.
It's a two-piece case with a silicone full body case that covers the whole phone, and then a hard plastic outer shell that kind of clamps around the silicone.
The silicone part is supposed to absorb shock when you drop it, I guess. It has tabs that cover the headphone and usb ports, cutouts that are perfect for the camera and speaker, and mic, and is a bit thicker on the corners, which gives me some confidence and makes me think that they thought the design through well. I've dropped it a bunch, and watched my 1.5yr old son throw it to the ground, and no probs.
The plastic part wraps around that and is supposed to be good at reducing risk of damage during "crushing" impact. All I can say is that I actually shut my car's trunk on this phone accidentally and it was absolutely fine. It gives it gives it a sleeker feel and minimizes the "ruberry-ness", too.
It also comes with a clear screen protector that is fine, and I don't even notice. Since the screen is curved most people complain about the fact that screen protectors don't stick well on the edges, which is true, but the lip of the silicone case on the front covers this area, so you don't even notice it. I also don't notice a difference when using the touchscreen.
The silicone part does collect lint, so if you're OCD about that, it'll be annoying, but the protection makes it totally worth it for me. I'll gladly pay $30 for a rock solid case that collects a little lint rather than get insurance at $7.99 x 24 months = $192 over the contract. The one thing that's important to know if you use multiple batteries like I do, is that you have to put the silicon section into the hard plastic section first, pop all the buttons out of their holes on the hard plastic case, and then push the phone into the case. If you try to put the rubber part on the phone first, and then put the hard plastic on, the fit is so tight, it's tough to get the buttons to pop out. It was pretty frustrating before I figured this out, but now it only takes me a few seconds to do a battery swap. Finally, the case does add some bulk to the phone, but I personally don't think it's all that bad. The phone feels more solid in my hand and is much less slippery.
I've been meaning to write a review for this phone in the proper thread, but I don't like to review stuff unless I've really used it. So I pretty much forgot till I saw this post. Maybe I'll go link to this post in that thread too, but if you want pics, I remember seeing them in that thread, and in threads over on androidcentral or androidforums or something. Good luck with the case search.

I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.

corgan1001 said:
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
Click to expand...
Click to collapse
Dou you have i9020 or i9023 version?

These are sick... Like the Mercury, but minus the blatant Engrish
http://www.myincipio.com/Google-Nex...Ultralight-Hard-Shell-Case-1065_1566-opt.aspx

Urban Armor Gear vs Otterbox Commuter

Really torn right now between purchasing the Commuter case from Otterbox or picking up one of the UAG cases for my note 2. I see that the Otterbox offers a two layer case vs the UAG single layer. Also the Commuter has covers for the ports and the UAG does not. Also for those that do own either or both, which do you orefer and why?
Sent from my SCH-I605 using Tapatalk 2

2 layers or a single molded layer - both offer very similar level of protection. I played with Commuter, but pass on it. Using UAG now. Too many advantages over Commuter. The back is less slippery, and has standoff "feet" to create friction with a surface; Commuter is easier to accidentally push/slide off the table with slippery surface (like grass top or granite). Also feels less slippery in my hand (UAG that is). One piece is a lot easier to take off if you need to change battery or remove card. Design of volume/power buttons is better and more responsive, like an external hardware buttons. It's lighter. Better design, looks a lot cooler and has customizable vent inserts. Don't care much about port plugs since I use my phone as GPS on a charger in a car and having micro-usb port cover is PITA. I feel Commuter inner rubber shell will get loose with time, already noticed pull around volume buttons where the rubber part was looser.

Honestly i was pulling towards the uag but i couldnt risk an wait for it to show up so just said buck it an got a commuter.. So far ive been realy happy with it. Size is good gives me a better grasp. A tad slippery but i got used to it now an got my way of holding it. Lip size around the edges is nice too realy would help incase phone fell screen down. Also comes with its own screen protector wich i botched the install since i suck at putting those on. An the biggest of all my conserns was the push buttons. On most of my cases on my old gs2 they were hard to push an this case there just rite.. not to soft nor to hard at all realy just perfect pressure to press. Better then my exs gs3 commuter wich is hard as shat to press the volume or power. I wouldnt put up with it if it was like that on mine.
I give it a 9/10. An only for the color choices aint the best style combinations that they coulda use but oh well not a deal breaker
sent from my Cricket Note 2

Loved my s3 commuter but the note 2 version is now in the trash. That thing was a terrible fit and gradually got worse. Had a replacement that was the exact same. UAG looks like the clear winner right now. I will buy once the crazy pricing goes down.
Sent from my SCH-I605 using xda app-developers app

I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:

I have to go with the commuter here. Some of the previous reviews have pointed out that the back is slippery. While I would agree, I also think that is not too slippery, and it is much easier to put in and take out of pockets than the UAG. Also, the biggest thing that I disliked about the UAG besides the lack of port covers, was that it just felt awkward in my hand. The commuter is much nicer to hold IMO. Also my UAG case was less than snug, it just felt like the phone wasn't secure. Also, the Commuter I think offers superior protection. Just check out this video. The Commuter, for all realistic purposes, does protects the phone just as much as the defender (which I also have). I think the commuter is the clear winner here.
Also, for what it's worth, Otterbox is the best mobile accessory company out there. Their customer service is quick & friendly. I have contacted them through both phone and email, and I have never received any service less than stellar, unlike my experience with UAG. I preordered my UAG case and was shocked at how little contact UAG had with me, as a preorder customer, especially considering how long the case was delayed.

My commuter also bent my charging port with its stiff port cover. Had to cut it off after my phone was replaced and then the left side of the phone began popping out. The Otter box hit the trash immediately.
Sent from my SCH-I605 using xda app-developers app

I loved my commuter when I first got it but now I hate it. The silicone is made out of cheap material, two weeks old and it's already tearing. The back is very slippery. I sometimes have trouble fitting my usb plug into the slot because the silicone gets in the way. Haven't had the usb bend yet as some have reported. The headphone jack on the commuter is not big enough for some of the plugs I use. I order the UAG case and it will be in tomorrow. I had the UAG on my S3 and I know what a terrific case it is. When my UAG comes in I'm throwing the commuter away.

I have had a commuter, a few other cases, and the UAG.
The Uag was my clear favorite. It is slim enough, but offer comparable protection to the commuter. The commuter was just too heavy and thick. The Uag is slimmer, and noticeably lighter.
I'd recommend Uag over the computer with out pause... Build, looks, and overall quality. But that is simply my opinion and nothing more.
I had seidio active... The magnet kickstand messed up the stylus.
I had a incipio dual pro shine. Great case that added protection, but not as much as the two you listed above. It so scratched so easy and looked like horrible in a week.
The Uag is my final case I believe. If your not sold on either, look into the trident aegis. I oersonslly don't like the way it looks, not even a little bit. But it is getting g great reviews by people here and the people who own it seem to prefer it. Maybe it looks better in person.
Sent from my SPH-L900 using Tapatalk 2

jbreeze228 said:
The silicone is made out of cheap material, two weeks old and it's already tearing.
Click to expand...
Click to collapse
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?

AlphaNoble said:
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
Click to expand...
Click to collapse
Lmao. Nicely done sir.
Sent from my SGH-T889 using Tapatalk 2

Anyone know if UAG Allows wireless charging or does it affect it?

So I settled on the commuter case and have got to say I am pretty happy with it. Doesn't make the phone all that much bigger and having the port covers is a plus. Although we will see I'm pretty sure I will end up getting the UAG case as well so I can try them both out.
Sent from my SCH-I605 using Tapatalk 2

Literally just got my UAG case in and it was effing awesome! It's so easy to hold and grip versus the commuter I was scared would fall out of my hands because it was so slippery. The buttons are a lot easier to push. Love how you can change the vent colors but rockin the orange for now. The only area the Otterbox wins in is the size of the spen cut out. Other than that there is no comparison between these two. Don't see myself using any other case. Great job UAG.
Sent from my SGH-T889 using Tapatalk 2

chodie said:
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
Click to expand...
Click to collapse
Please let us know how it goes with the MIME glass screen protector.

I have both cases and must say UAG wins. Top it off with mime, excellent product with outstanding support
Sent from my GT-N7105 using xda premium

P
Sent from my HTC One using Tapatalk

UAG is very light and is easy to put on or take off. It has military standard drop. Heat vents keep your phone cool. Easy to hold. Looks good if you like the rugged look. Last a long time. I have a uag case from 4 years ago that still looks great today.

Sawdust in your port
Covered ports may seem unnecessary, but when I was working at radioshack, an old man came in and said his phone wasn't charging right. I assumed it was the cord (because that is the case 9 times out of 10), but the cable was perfectly fine. I then checked the USB port, and it looked like someone shoved white playdough in the port and shoved it down. As I pick it out, I discover it was sawdust that was left in there and shoved down over time. The phone worked fine after that.