Database Develop

[ROM] (CWM) HoneyComb Froyo V.3 (06-07-11)

It is New release of HoneyComb Froyo Builds ...
* Working :
- Everything except Camera & BT
- Downloading from market may take long time to start at first time ..
* Features :
- Very Stable & Fast & Smooth Froyo CWM build ..
- Very Fast Wifi with No Dropping ..
- Very Good battery life ..
- Neocore : 25.6 FPS
* Kernel Related issues :
- You may not hear voice during incoming call > Just activate the speaker & deactivate it again to solve this issue ..
- Charging while in android isn't working > You should connect the charger before hitting (haret.exe) ..
-----------------------------------------------------------------
* Installing instructions :
1- Format SDcard To 4 Partitions :
- 1- partition: FAT32 (SDcard / Rest)
- 2- partition: EXT2 (System / about 250 MB )
- 3- partition: EXT2 (Data / about 450 MB)
- 4- partition: EXT2 (Cache / about 100 MB)
* Make sure That all partitions are set PRIMARY ..
2- Extract Package & Copy [npkboot] Folder to root SDcard ..
3- Copy [HoneyComb Build V.3] To root SDcard without extraction ..
4- Run Haret & wait till it ask you to press Volume Down shortly to launch ClockworkMod Recovery ..
5- While In recovery menu , choose " install zip from SD card >>
choose zip from sdcard and select " HoneyComb Build V.3.zip " ..
- Then return back to main menu using " ok " key , Then choose " reboot system now "
6- Run " HARET.exe " & leave it to continue booting into Android ...
** For More info see THIS TOPIC
------------------------------------
** Very Important :
* Please don't install GAPPS after rom installation directly , Otherwise you'll have a serious problems ..
So you must :
1- Install HoneyComb V.3
2- Run the build
3- Restart it
4- Install Gapps
* Attached Kernel is highly overclocked , it may not work with all kovsky devices , so if it doesn't work with you, try to change the overclocking value from 652 to 614 mhz in startup.txt ..
- If it is still not working , replace this kernel with "Turbo kernel" attached to package ...
*********************************************
* Thanks To :
- Neopeek ( For CWM & Many others )
- TiaD8 ( Many tweaks & stuff taken from his builds )
- Highlandsun ( For his libs )
- People made these themes & icons .
- All other persons who i forgot to mention ..
**********************************
DOWNLOAD
^^^^^^^^^^^^^^^^^^
* On Screen Answer interface
* For Keyboard Freezing proplem
**********************************
If you like my work, Please just Don't Mirror my links ..
Don't Forget To click Thanks Button ...

* Installing instructions :
1- Format SDcard To 4 Partitions :
- 1- partition: FAT32 (SDcard / Rest)
- 2- partition: EXT2 (System / about 250 MB )
- 3- partition: EXT2 (Data / about 450 MB)
- 4- partition: EXT2 (Cache / about 100 MB)
* Make sure That all partitions are set PRIMARY ..
2- Extract Package & Copy [npkboot] Folder to root SDcard ..
3- Copy [HenDroiD_V2.zip] To root SDcard without extraction ..
4- Run Haret & wait till it ask you to press Volume Down shortly to launch ClockworkMod Recovery ..
5- While In recovery menu , choose " install zip from SD card >>
choose zip from sdcard and select " HenDroiD_V2.zip " ..
- Then return back to main menu using " ok " key , Then choose " reboot system now "
6- Run " HARET.exe " & leave it to continue booting into Android ...
** For More info see THIS TOPIC

finally.....great work man....!!! download now....

nice work !!!
needo why you delete languages from this ROM?? ( please return choose czech language in Settings )

are the Keypad drivers modules or not ?

RenEdi said:
nice work !!!
needo why you delete languages from this ROM?? ( please return choose czech language in Settings )
Click to expand...
Click to collapse
this build isn't supporting many laguages, but you can use morelocale ( Attached to this post )
djkarl said:
are the Keypad drivers modules or not ?
Click to expand...
Click to collapse
the separate keypad modules isn't included in this package , i think you wan't need it again > i'm using it for more than 8 hours with no keyboard stoppage ..

trying now

Tried it for 2 hours now. I had only one wifi connection lost. But that was the only error. Market works. It's fast and stable LOVE IT ^^

I'll give it a try asap! =)
is AZERTY keymap available ?

can someone make a video on how to Become the process we do start the haret I've done it many times k no can do let us help someone. instructions I pay close attention but nothing.
sorry my english!

tried this for a few hours and the build is quite solid and stable, but with all other android builds ive tried, the keypad freezes all the time for me. froze 3 times so far in 4 hours. guess i still cant use any android build until thats fixed in the kernels. ill try the turbo keernel tosee if its any better

i have a problem, it don't ask me: press volume down
Do you know why that is?
(Sorry for my bad English)

Gameforce said:
i have a problem, it don't ask me: press volume down
Do you know why that is?
(Sorry for my bad English)
Click to expand...
Click to collapse
When you start android and the code is displayed there is the pinguine on the top, wenn the pinguin disapear and the code begin at the top, than press vol down

wi fi
- Very Fast Wifi with No Dropping .. ---- NOT Working for me.. when i try to start wi fi my x1 reboots back in winmo
great speedy rom, very fast!!!!

neoofoox said:
When you start android and the code is displayed there is the pinguine on the top, wenn the pinguin disapear and the code begin at the top, than press vol down
Click to expand...
Click to collapse
Oke thanks,
And do you know how long i need to wait before the pinguine dissapeared???

great rom !! but if i make a call or get incoming call,,i can't found red and green button in my screen,,so i used red/green button in under screen..thank very much

Gameforce said:
Oke thanks,
And do you know how long i need to wait before the pinguine dissapeared???
Click to expand...
Click to collapse
It should apeare after 30-60sec (normaly shorter)

PsychoAssasin said:
tried this for a few hours and the build is quite solid and stable, but with all other android builds ive tried, the keypad freezes all the time for me. froze 3 times so far in 4 hours. guess i still cant use any android build until thats fixed in the kernels. ill try the turbo keernel tosee if its any better
Click to expand...
Click to collapse
you can use the kernel with separate keyboard modulus so you can activate it with one touch everytime it freazes ...
ncw2k69 said:
- Very Fast Wifi with No Dropping .. ---- NOT Working for me.. when i try to start wi fi my x1 reboots back in winmo
great speedy rom, very fast!!!!
Click to expand...
Click to collapse
i don't know the reason , but it may be winmo related or radio related , BTW try to enable wifi in Winmo & start android ...
vannanta said:
great rom !! but if i make a call or get incoming call,,i can't found red and green button in my screen,,so i used red/green button in under screen..thank very much
Click to expand...
Click to collapse
yes it was excluded , it is always getting distorted & some times doesn't work ...

neoofoox said:
It should apeare after 30-60sec (normaly shorter)
Click to expand...
Click to collapse
it depends on the SDcard contents , if there are many files & folders it'll take longer & so on ...

needo said:
it depends on the SDcard contents , if there are many files & folders it'll take longer & so on ...
Click to expand...
Click to collapse
Ah okay I didn't know. I have quite clean sdcard.
And I have one question. After Installing gapps (after launching android) everything worked fine and I never get a force close message. But after starting Android after reboot I get a lot of force close messages. (The process android.process.acore has stopped unexpectedly. Please try again.)
I use turbo kernel (this one in the turbo kernel folder @612mHz)
The included one didn't work. I pressed harret and then phone restarted (i tried both 652 and 614 mHz) Do someone know what's the problem? But that is not so urgent

[ROM] - Custom Rom Honeycomb 3.2.1 - firmware_3.2.79 , ext4 for SDE

Hi , greeting everyone !
Before appearing ICS, I made a small update custom, including small changes in the original firmware 3.2.79.
This release is permanently ROOT, busybox is installed proper and is unique , Su and Superuser is up to date ! At the bottom you have Update of this version (activated vibrator and fixed adb command).
Included : 24/01/12
- new boot animation;
- battery percentage, and other new Icon;
- several applications in addition ( office free, flashplayer 11,adobe air.....+++);
- windows animations;
- Sony Ericsson Xperia Arc sound and other stuff.....
Now we have latest update of Su binary v3.0.3.2 , Superuser v3.0.7(41), unique busybox v1.19.3 installed into system/xbin ;
There is no need to install busybox.apk or busybox installer.apk from market, busybox is already installed into /system/xbin/
Also included some tweaks : - increase sdcard speed, - managemant ram memory....and increase reaction speed !
These are the files you need for install this Custom Rom :
- archos.ext4 => http://www.4shared.com/archive/tOxGcPqa/archos.html , http://hotfile.com/dl/143897684/d5edc5d/archos.7z.html
- zImage => http://www.4shared.com/file/KXp8bLDa/zImage.html ; http://hotfile.com/dl/144036333/e7d0e75/zImage.html
- initramfs.cpio.gz => http://www.4shared.com/zip/HnEobpnG/initramfscpiogz.html
How install :
- because the file structure is changed , you need perform a clean installation : Recovery -> Format System -> Reformat Devices...-> I Understand -> ok -> copy firmware_archos_it4.aos into new driver -> ok. After reboot copy archos.ext4 into Internal Storage ( data/media/), reboot into recovery , Recovery System-> Developer Edition Menu -> Remove Kernel ( for boot only to SDE) -> I Understand -> Ok -> Developer Edition Menu -> Flash Kernel and Initramfs -> copy zImage and initramfs into new driver -> Ok ! that's all ....now you have clean install custom rom
Solved - md5sum into superuser when you try to update the su binary , now check md5sum OK!
I did not managed any version of .squashfs because android compiler can't install busybox into system/xbin ( .squashf is NOT RW ), this is why I presented only version of ext4 ...Good Luck !
****************************************************************
Update : 27/01/12
- now >adb shell - fixed and enabel vibrator
- archos.ext4 => http://www.4shared.com/zip/dOscQIvA/archos_up.html ; http://hotfile.com/dl/143982123/b452656/archos_up.zip.html

What did you use to increase ram?
Sent from my HTC Desire HD using xda premium

Quinny899 said:
What did you use to increase ram?
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Hi! ...I just increase free ram , lol !

surdu_petru said:
Hi! ...I just increase free ram , lol !
Click to expand...
Click to collapse
Ok
Sent from my ARCHOS 80G9 using xda premium

good job tomorrow i try it (multumesc )

Maryanos25 said:
good job tomorrow i try it (multumesc )
Click to expand...
Click to collapse
..cu placere ....incearca-l nu vei regreta !
with pleasure ...try it...you'll no regret !

Nu ama avut rabdare si l-am instalat. Merge ok. Merci mult.
Y dont have patience and y instaled. Its ok. Thanks.
Sent from my ARCHOS 80G9 using xda premium

Quick question, and I appologize if this is the wrong place for this, I'm currently running your 3.2.78 (ext4). Do I need to update the stock firmware directly from archos first or can I just flash this 3.2.79 rom over what I currently have. Also I "removed android kernel" earlier to always boot rooted if that matters. So what's the best way of going about this?

surdu_petru said:
I did not managed an version of .squashfs because I can't install busybox into system/xbin ( .squashf is R/O ), this is why I presented only version of ext4 ...Good Luck !
Click to expand...
Click to collapse
You can try this:
-get a copy of busybox and symlinks from a working rom (make a .tar or .tar.gz of G9's [email protected])
-copy busybox+symlinks in appropriate directories and chmod them (just to be sure)
-mksquashfs
This *should* work (I've messed around a bit with squashfs on another device)

First custom rom i've seen. Great ! Thank you very much. I will try it later

First thank you surdu_petru Every new rooted/modified rom, I need to start tablet with "original" rom to copy the ext rom into the tablet, and every time, restarting for the first time after the update from sde with the "new" rom, I have SuperUser with empty list (and I have to re-add all the programs in my list). Is there a way to copy the ext rom without booting with original rom? thank you and sorry for my poor english

hitman72 said:
Is there a way to copy the ext rom without booting with original rom? thank you and sorry for my poor english
Click to expand...
Click to collapse
Not yet, accessing /data/media requires a working system (adb is not present in SDE/recovery)
However you should be able to update using "previous" custom firmware- system filename is different

install directly over the version rooted 3.2.79.
Work good. =)
Boot animation - maybe simply text android install? =) Can i change it himself?

gen_scheisskopf said:
You can try this:
-get a copy of busybox and symlinks from a working rom (make a .tar or .tar.gz of G9's [email protected])
-copy busybox+symlinks in appropriate directories and chmod them (just to be sure)
-mksquashfs
This *should* work (I've messed around a bit with squashfs on another device)
Click to expand...
Click to collapse
OK thanks !....but do not want to complicate ... I let the compiler to perform, if he says he can not because I have not rw rights !...I left it ..... I know that there are solutions, but leave it in for users !

ro4sho said:
First custom rom i've seen. Great ! Thank you very much. I will try it later
Click to expand...
Click to collapse
Thanks , lol....

gegabit said:
install directly over the version rooted 3.2.79.
Work good. =)
Boot animation - maybe simply text android install? =) Can i change it himself?
Click to expand...
Click to collapse
Sure, you can change what you want, system is RW, but attention ! do it carefully !

gen_scheisskopf said:
Not yet, accessing /data/media requires a working system (adb is not present in SDE/recovery)
However you should be able to update using "previous" custom firmware- system filename is different
Click to expand...
Click to collapse
In my builds, I added a mechanism to do that, the idea was to add a ".update" to filename to have the initrd replace the old image with the ".update" image before mounting and booting.
Surdu_petru, I don't know if you did the same in your initrd. As gen_scheisskopf mentioned in the sde thread, wiping dalvik-cache is probably a good idea if build changes, it could be done silently there or asked with a menu ? And a common file naming convention between us would help, I saw that you use the archos.img, we could define this as a standard ?

letama said:
In my builds, I added a mechanism to do that, the idea was to add a ".update" to filename to have the initrd replace the old image with the ".update" image before mounting and booting.
Surdu_petru, I don't know if you did the same in your initrd. As gen_scheisskopf mentioned in the sde thread, wiping dalvik-cache is probably a good idea if build changes, it could be done silently there or asked with a menu ? And a common file naming convention between us would help, I saw that you use the archos.img, we could define this as a standard ?
Click to expand...
Click to collapse
Ok I know what you mean...and yes ! for Stock firmware_3.2.79 (files.ext4/squqsh).update exist into initramfs, but because I made ​​some changes in directory structure into Custom Rom , now .update it's not perform .
Ok it's very good idea , for future I'll rename (archos.ext4/squashfs).update
Thanks for your advice !

surdu_petru
will there be a custom rom for the archos 80 g9 250hdd or a root method
it would be nice to have a custom rom on my hard drive tablet
root method only seems to work on sd card versions of this nice tablet
regards phil

philmein said:
surdu_petru
will there be a custom rom for the archos 80 g9 250hdd or a root method
it would be nice to have a custom rom on my hard drive tablet
root method only seems to work on sd card versions of this nice tablet
regards phil
Click to expand...
Click to collapse
Hi!
This custom rom it's work for G9 tablett 80/101 but I don't know if it is supported for HDD.....maybe @letama or or another endorsed person will answer.....for you !

[ROM] Custom Rom Honeycomb 3.2.1 - Firmware 3.2.80, Rooted & BusyBox installed !

Hi , greeting everyone !
If ICS has not yet occurred then it's time for a new Custom Rom ...
This Custom Rom is based on the original Archos Firmware 3.2.80 and is only for enable SDE.
This release is permanently ROOT, have one busybox installed proper, Su and Superuser is up to date.
Included : 05/02/12
- new boot animation;
- battery percentage, and other new Icon;
- several applications in addition ( office free, flashplayer 11,adobe_air.....+++);
- windows animations;
- increase sdcard speed;
- more free ram;
- zipaling for /data/app/*;
- increase internet security and speed up ;
- high quality camera ( Sony-Bravia patch...);
- and other stuff....
These are the files you need for install this Custom Rom :
- archos.ext4.update => http://www.4shared.com/zip/4RFkHY4x/archosext4update.html
- zImage and initramfs => http://www.4shared.com/zip/gd_SWiL7/drive.html ( are into drive archive ....drive.zip)
Installation :
Can be installed over previous versions , for this it is better to flash with initramfs posted of @gen_scheisskopf ( http://forum.xda-developers.com/showthread.php?t=1480906 )
If you want to do a clean installation (recommended), then you only need to download : archos.ext4.update and drive.zip .
Also included enable vibrator and adjust sound volume !
( Not need to install : Superuser.apk and BusyBox.apk from the Market - they are already installed and updated , latest : Superuser - v.3.0.7(41), busybox - v1.19.3, su - v3.0.3.2 )
Great Thanks @gen_scheisskopf ...
With respect,
surdu_petru

How did you get more ram? I don't like the battery icons, so I'll stay on stock rooted, but how did you get more?
Sent from my HTC Desire HD using xda premium

Quinny899 said:
How did you get more ram? I don't like the battery icons, so I'll stay on stock rooted, but how did you get more?
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Hi !
Everyone is free to choose what version of software like.... , that is why I tried to diversify the range of Archos firmware ....everyone is free to choose currently between four versions of software released ( Original Stock Rom firmware3.2.8, Root Rom firmware3.2.80 , Custom Rom firm. 3.2.80 and Plasma Active,Thanks @LeTama ).
Of course expected and welcomed other versions of Custom Rom including various stuff !!!
On the other side, I have answered the same question about ram in the previous version ( Honeycomb Custom Rom 3.2.79 => http://forum.xda-developers.com/showthread.php?t=1462726 )
Have a nice day and Good Luck !

hi, sorry for my noob questions. I have used gen_scheisskopf's initramfs. After the first "long" boot, with pleasure, I saw that the "wipe-dalvik.update" file was deleted automatically now is necessary reflash your initramfs surdu_petru? are there problem leaving gen_scheisskopf's initramfs and rebooting without "wipe-dalvik.update" file? thank you
p.s. new icons for me are always better on every new version

hitman72 said:
hi, sorry for my noob questions. I have used gen_scheisskopf's initramfs. After the first "long" boot, with pleasure, I saw that the "wipe-dalvik.update" file was deleted automatically now is necessary reflash your initramfs surdu_petru? are there problem leaving gen_scheisskopf's initramfs and rebooting without "wipe-dalvik.update" file? thank you
p.s. new icons for me are always better on every new version
Click to expand...
Click to collapse
Ok ! no need to use another initramfs !
And less beware :
- if you plan to do a clean installation ( go to Format System, Reformat Device...OK! and reinstall archos_firmware_it4.aos , than copy archos.ext4.update into Internal Storage data/media/archos.ext4.update, reboot and into recovery copy the two files that are in drive.zip zImage , initramfs - into new drive ) - for this you don't need gen_scheisskopf's initramfs ;
- if you plan to do just update over the original firmware or rooted firmware you need just copy archos.ext4.update on Internal Storage (data/media/archos.ext4.update) and into recovery choose gen_scheisskopf's initramfs and zImage ;
I think you're better now...

Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?

blogmaw said:
Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?
Click to expand...
Click to collapse
If you are still in Custom Rom 3.2.79 you need to push archos.ext4.update into data/media and in recovery copy gen_scheisskopf's initramfs and zImage into new drive ! whith this you'll not lose your work , and Yes after flash you can delete archos.ext4.update from data/media/...Good Luck!

blogmaw said:
Thanks for all your work! Just so I know, which file can I get rid off after flashing? I had your .79 custom rom before. Can I delete the archos.ext4.update file ?
By the way is the wipe Dalvik-cache from Supercharger OK?
Click to expand...
Click to collapse
There is no need to worry about .update files, they are removed automatically.
I'll check Supercharger dalvik-cache wipe later.
BTW there is no need to flash suduru_petru init if you did flash modified one, functionality is the same, modified init works stable on my G9.
tapatalked from Desire

i just flashed this and will observe for some bugs. i dont know if this happened only to me. i noticed that when i turn off the wifi, the 3G stick will automatically be turn On even if its Off. tried switching it Off,but still it wont turn off.. it is still prompts that 3G stick connected

Flash sites not working
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill

bothylad said:
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill
Click to expand...
Click to collapse
Flash is not a part of kernel or system, it is a separate application.
Wipe dalvik-cache and try again- here is info.
If this doesn't help- reinstall flash

bothylad said:
Hi
with this version of root I am unable to get Flash 11 to work (previous root is O.K.). Sites prompt for Flash to be installed although the software is installed. I can't uninstall as it seems to be part of the kernal. Installing Flash 10.3 allows Flash sites to work until a reboot disables it again. Any ideas.
best regards
Bill
Click to expand...
Click to collapse
Ok!
You can do that : navigate into /system/app/flashplayer.apk and try to reinstall it , it's work fine....you can do the same with...adobe_air.apk and BooksTablet.apk
flashplayer and adobe_air are just preinstalled in this custom rom .
Thanks , Good Luck!

surdu_petru said:
Ok!
You can do that : navigate into /system/app/flashplayer.apk and try to reinstall it , it's work fine....you can do the same with...adobe_air.apk and BooksTablet.apk
flashplayer and adobe_air are just preinstalled in this custom rom .
Thanks , Good Luck!
Click to expand...
Click to collapse
Hi
thanks for your quick reply
I'am unable to delete Flashplayer, if I tap on the .apk I am prompted to re-install Flashplayer this resolves the issue until I reboot. Is this a permissions problem, how can I check.
I downloaded root explorer changed permissions on flashplayer.apk deleted it and re-installed from market working O.K. now.
Regards
Bill

Greetings, surdu_petru,
I recently installed this custom rom, into my Archos 80G9, and I have a question:
is there anyway to disble/enable the power supplied to de usb connector, in where the 3g Usb Dongle is connected, I use this port to supply power to a small fan, in order to cool down the tablet, and i would like to have control over it, before i rooted, I could controlled it by, just toggling the 3g switch on/off.
thank you in advance, for any help you could give me,
OsiriS5180

osiris5180 said:
Greetings, surdu_petru,
I recently installed this custom rom, into my Archos 80G9, and I have a question:
is there anyway to disble/enable the power supplied to de usb connector, in where the 3g Usb Dongle is connected, I use this port to supply power to a small fan, in order to cool down the tablet, and i would like to have control over it, before i rooted, I could controlled it by, just toggling the 3g switch on/off.
thank you in advance, for any help you could give me,
OsiriS5180
Click to expand...
Click to collapse
Because no changes are made ​​in this direction in the original software, I think you can control as before toggling 3G switch ON/OFF !

surdu_petru said:
Because no changes are made ​​in this direction in the original software, I think you can control as before toggling 3G switch ON/OFF !
Click to expand...
Click to collapse
Thank you, for your fast response, right now I have the switch in the off position, and still have the fan on, it could be the rooting process? , I rooted first with your other post for this version of the firmware, any help would be appreciated.....
Thank you in advance. ..
Osiris5180

So you recommend a clean install? Does this mean removing the kernel or formatting the whole drive?
Sent from my ARCHOS 80G9 using Tapatalk

Shano56 said:
So you recommend a clean install? Does this mean removing the kernel or formatting the whole drive?
Sent from my ARCHOS 80G9 using Tapatalk
Click to expand...
Click to collapse
A clean installation is the best and safest method of installing an operating system....to performe clean instal go to Format System->Reformate Device...-> I understand OK!, after that you need install original .aos file, and than flash archos.ext4.update. ( and yes ..will be completely formatted !)
And if you have important data and you can not delete, than you can install over previous versions, but you need initframs with removal Dalvik-Cache mechanism ( see initramfs posted [email protected]_scheisskopf).

osiris5180 said:
Thank you, for your fast response, right now I have the switch in the off position, and still have the fan on, it could be the rooting process? , I rooted first with your other post for this version of the firmware, any help would be appreciated.....
Thank you in advance. ..
Osiris5180
Click to expand...
Click to collapse
OK !...you are right ....I'll take a look ..but not right now...I have no time ! Thanks !

Thanks.................great job

[ROM] Archos ICS - Last Firmware 4.0.4 , Root, Busybox & Deodex - Only for SDE

Hi !
I am pleased to present the latest Archos ICS Firmware 4.0.4 , now with Root, Busybox and Deodexed all files into /system/app/* & /system/framework/* !
In this rom original files have been modified, to be Deodexed and added : Su, Superuser, Busybox & ICS Blue bootanimation !
These are the files you need to install root version :
- archos.ext4.update in archive archos.ext4.update_4.0.4.zip => https://hotfile.com/dl/149767565/ddfdbd1/archos.ext4.update_4.0.4.zip.html
- zImage and initramfs.cpio.lzo in archive drive_4.0.4.zip => https://hotfile.com/dl/149766018/3229b8e/drive_4.0.4.zip.html
http://www.4shared.com/zip/2PK6zYOt/drive_404.html
Installation :
- copy archos.ext4.update into Internal Storage ( /data/media ; /mnt/storage )
- reboot into SDE menu and under Developer Edition Mernu , Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop
- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
The first boot take longer ....and also for the first boot you will not see bootanimation !.
This Root version works on all tablets gen9, is stable and can be used as a daily ROM !
( For not to expect too much between the two download ....now you have the option to download drive_4.0.4.zip )
If you have problems installing this root version , then you can thank him ( @Shano56 ) and please visit => http://forum.xda-developers.com/showthread.php?t=1542058
A deodexed rom allows for developers to theme the rom and tweak certain apps as they wish !
regards,
surdu_petru

Can't wait for this to be uploaded :3 does this have letamas kernel for overclocking? or will u include that in your custom firmware?

Shano56 said:
Can't wait for this to be uploaded :3 does this have letamas kernel for overclocking? or will u include that in your custom firmware?
Click to expand...
Click to collapse
Hi !
Because it's not a realy Custom Rom , I have not included the kernel of @letama !

surdu_petru said:
Hi !
Because it's not a realy Custom Rom , I have not included the kernel of @letama !
Click to expand...
Click to collapse
Okay! thanks for letting me know.. thanks for the deodex

Can I just have the bootanim? :3 Don't wan't to screw my overclock and build.prop

my 101 is already rooted with your previous ics 404. can i install the deodex version over the older one? what about with archos.ext4.backup file? should i delete them?

letamas overclock kernel doesnt work with this rom...the touchscreen doesnt work

4carlos said:
my 101 is already rooted with your previous ics 404. can i install the deodex version over the older one? what about with archos.ext4.backup file? should i delete them?
Click to expand...
Click to collapse
Hi!
Yes you can do ...and ....
No...don't delete .backup....you will need for Reset Android ! ...otherwise it will not work ! Good Luck!

Will this work with the hdd model and does this version address the wifi issues?

philmein said:
Will this work with the hdd model and does this version address the wifi issues?
Click to expand...
Click to collapse
Hi !
It should be work ....and for moment I don't have any problem with wi-fi ! Good luck !

surdu_petru said:
Hi!
Yes you can do ...and ....
No...don't delete .backup....you will need for Reset Android ! ...otherwise it will not work ! Good Luck!
Click to expand...
Click to collapse
thanks for reply. it works.

Just curious does this rom have the ac3 codec installed so I don't have to use MX video player

do not "custom" this fmw
it is a test for resolved problems

robertlawson225 said:
Just curious does this rom have the ac3 codec installed so I don't have to use MX video player
Click to expand...
Click to collapse
Ac3 plugin is available HERE (you have to buy it). But yes, firmware supports it.

Hi Thank you for your firmware,
I'm kinda new to this..
and i think I've accidentally made a mistake with this update
in sde menu i followed what needs to be done
flashed then copied the 2 other files to the internal HDD of the archos
and after the reboot i never saw the update screen
it went black and keeps rebooting ,sounds like it stock in a loop
(i have the 250GB hdd model so i can hear the spin loopy sound )
i have ruined my device,haven't i ?
thanks for any help

a83 said:
Hi Thank you for your firmware,
I'm kinda new to this..
and i think I've accidentally made a mistake with this update
in sde menu i followed what needs to be done
flashed then copied the 2 other files to the internal HDD of the archos
and after the reboot i never saw the update screen
it went black and keeps rebooting ,sounds like it stock in a loop
(i have the 250GB hdd model so i can hear the spin loopy sound )
i have ruined my device,haven't i ?
thanks for any help
Click to expand...
Click to collapse
hi! your device is not ruined don't worry!
first download this http://update.archos.com/9/gen9/gen9_4.0.4-TEST/firmware_archos_it4.aos
then install using step 1 of my guide (don't format if you don't want to lose apps and media), and step 2 for root http://forum.xda-developers.com/showthread.php?t=1542058

cajl said:
do not "custom" this fmw
it is a test for resolved problems
Click to expand...
Click to collapse
HI!
OK!
Maybe I'll try a test version " Custom Rom Beta" - but I still have much work !

Hi There
Unfortunately the Update also didn't work for me.....
I already get the Android 4.04 Update from Archos, and i also downloaded the AOS File in case that i need it. After that i used the SDE to copy File 1 and 2 on to the Archos 80. Then i executed the Files. After Rebooting the Second Time my System is really Slow it is impossible to use it correct. Anyway i copied the the Update File (archos.ext4.update) onto the System Root. Then i boot into SDE Menu and choose Developer and copy the remaining two Files (zImage and initramfs.cpio.lzo)to the Ramdisk, My Archos updates them. At next reboot i didn't see the Logo of Archos and nothing happens for Hours. i can boot into SDE Menu and i am also able to reformat the Device with the AOS File ( With the original Rom System is really Fast ). So do i made any Mistakes..?
Jiggasonic

Jiggasonic said:
Hi There
Unfortunately the Update also didn't work for me.....
I already get the Android 4.04 Update from Archos, and i also downloaded the AOS File in case that i need it. After that i used the SDE to copy File 1 and 2 on to the Archos 80. Then i executed the Files. After Rebooting the Second Time my System is really Slow it is impossible to use it correct. Anyway i copied the the Update File (archos.ext4.update) onto the System Root. Then i boot into SDE Menu and choose Developer and copy the remaining two Files (zImage and initramfs.cpio.lzo)to the Ramdisk, My Archos updates them. At next reboot i didn't see the Logo of Archos and nothing happens for Hours. i can boot into SDE Menu and i am also able to reformat the Device with the AOS File ( With the original Rom System is really Fast ). So do i made any Mistakes..?
Jiggasonic
Click to expand...
Click to collapse
Hi !
Please do not use this root ! because is a test version ....please use this => http://forum.xda-developers.com/showthread.php?t=1537366
Thanks !

[RECOVERY][OneUI-2.5][UNOFFICIAL] TWRP 3.4.0_10.0 For Samsung M51 - Final

*** WARNING ***​This version of TWRP is not compatible with Samsung android 11 (OneUI 3.1) release and it won't work if you have updated your phone to that android version
If you need more detailed steps of what do then wait for my complete guide
I'M NOT RESPONSIBLE IF YOU BRICKED YOUR DEVICE BECAUSE YOU ARE STILL NEWBIE
This is recovery won't get further updates or support​
Bugs
-Userdata decryption is not working so you should use an external SD or USB OTG for putting ZIPs and IMGs on it in order to flash them
How to Install
1. Unlock your bootloader
2. Boot to Odin mode
3. Check AP box and select TWRP tar file
3. Hit start
4. Have fun
Download
TWRP 3.4.0_10 - Stable 1
Sources
TWRP device tree: https://github.com/Lehkeda/android_device_samsung_m51_pbrp/tree/android-10_pbrp/
Kernel source: https://github.com/Lehkeda/android_kernel_samsung_m51/tree/ten

Change Log:
Stable 1 - 19th of December 2020
- Fix MTP
- Fix data partition mounting
- Fix system image flashing
Beta 2 - 16th of December 2020
- Fix ADB
- Fix mounting partitions (Except userdata)
- Fix navigation bar
- Fix CPU temperature
- Add reboot to download mode
Beta 1 - 12th of December 2020
- Initial Release

F.A.Q
How to mount system root to flash ZIPs and other stuff?
-Go to Advanced > terminal
-Type "mkdir /system_root"
-Type "mount /dev/block/mapper/system /system_root"
How to mount data partition?
-Go to Advanced > terminal
-Type "mount /dev/block/by-name/userdata /data"

Thanks man. I ll try to fix mtp , storage and scaling.

bekirakil said:
Thanks man. I ll try to fix mtp , storage and scaling.
Click to expand...
Click to collapse
Storage is partially fixed now.
For MTP, I compiled the kernel without Samsung MTP and it's Kinda working... adb can detect it now, but it still now showing on my computer
I need to add a proper init stuff for it

i was able to fix mount sdcard but i couldn't fix data im working on it

The encryption is really annoying

That was the best i could do. Data mounting is not working because of encryption. I couldn't find the key directory of the encryption. But you can flash from external sd.

Hello. Backup, Restore, running smoothly? Can I back up without problems? Thank you very much, thank you.

onurmemo77 said:
Hello. Backup, Restore, running smoothly? Can I back up without problems? Thank you very much, thank you.
Click to expand...
Click to collapse
It would be nice if you can test that for me as I'm not able to test right now!

LahKeda said:
It would be nice if you can test that for me as I'm not able to test right now!
Click to expand...
Click to collapse
Sure, I'll help.
But I couldn't download the new version of the twrp. Would you please upload to sites like media fire gdrive? Thank you very much, thank you.

onurmemo77 said:
Sure, I'll help.
But I couldn't download the new version of the twrp. Would you please upload to sites like media fire gdrive? Thank you very much, thank you.
Click to expand...
Click to collapse
Download it from a pc or activate desktop site option before downloading it or click on download it anyway link

Can you give me your email please? I need your help at my project. Maybe you can help. (Sorry for my bad english i'm german )

bekirakil said:
Can you give me your email please? I need your help at my project. Maybe you can help. (Sorry for my bad english i'm german )
Click to expand...
Click to collapse
DM me at telegram @lehkeda

The userdata decryption bug, does that mean it can't access the phone's storage in TWRP?

Camack said:
The userdata decryption bug, does that mean it can't access the phone's storage in TWRP?
Click to expand...
Click to collapse
Yes, but you can still access the data on USB device or external sdcard

@LahKeda After installing TWRP and flashing Magisk, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?

swiftez said:
@LahKeda After installing TWRP and flashing Magisk, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?
Click to expand...
Click to collapse
+1 would like to know too as the current root method patching boot.img with Magisk, you have to press power and volume up every time you restart the phone to keep root.

Thanks for the recovery. I have a question. Can I simply flash this via odin (no stock firmware download required) and it will work? I'm asking because in the other twrp thread there is a requirement of downloading and flashing stock firmware. The firmware for my region hasn't released yet.

Affangta said:
Thanks for the recovery. I have a question. Can I simply flash this via odin (no stock firmware download required) and it will work? I'm asking because in the other twrp thread there is a requirement of downloading and flashing stock firmware. The firmware for my region hasn't released yet.
Click to expand...
Click to collapse
Yes, no need to flash stock firmware at all.