Hi,
i got a P1000 galaxy tab 7 and found out that it was rooted and had a non stock rom installed, i asked the seller and he said it was rooted through ODIN, i used ODIN 1.7 to install a europian rom, and all what i need now is to un-root the device,, how can i unroot the device?
thanks in advance!
Why would you do that? Now you can use Titanium backup which is a very handy tool. If i need to unroot my tab i use oneclickroot. You can use oneclickroot for rooting and unrooting your tab. Look on the shortfuse.org site for download. And dont forget to donate if the script worked for you.
Mado
Sent from my GT-P1000 using xda premium
help needed
hello guys,
i have a galaxy tab p1000, which i recently rooted n installed (following some videos n how-tos from the google). everything seems to work fine but everytime i turn on my device the samsung animation starts and finishes and only then the animation sound occours(which was supposed to happen with the animation).
i am very new to these rooting, kernel, cwm, cm 9, firmware etc. could you please help me fix my animation and sound thing again? should i try rooting it again? is there any rom that is TRUELY stable with no bugs. my tab is GSM. ive attached the screen shot of my device's info.
ild be very thank ful if anyone could help me..
thanks a lot in advance
prazhantkarki said:
hello guys,
i have a galaxy tab p1000, which i recently rooted n installed (following some videos n how-tos from the google). everything seems to work fine but everytime i turn on my device the samsung animation starts and finishes and only then the animation sound occours(which was supposed to happen with the animation).
i am very new to these rooting, kernel, cwm, cm 9, firmware etc. could you please help me fix my animation and sound thing again? should i try rooting it again? is there any rom that is TRUELY stable with no bugs. my tab is GSM. ive attached the screen shot of my device's info.
ild be very thank ful if anyone could help me..
thanks a lot in advance
Click to expand...
Click to collapse
You can try re-rooting again. so far mine didn't have that problem. I suggest you to use overcome kernel its nice and smooth..
thank you
grandduke said:
You can try re-rooting again. so far mine didn't have that problem. I suggest you to use overcome kernel its nice and smooth..
Click to expand...
Click to collapse
Thank you very much for the info. I installed cm 9.1.0 and its working good so far.
problem after rooting tab p1000
i try to root my tab p1000 but after rooting it by odin my tab going to restart and can not open >>> i root it with wrong file >>>> i used root for ginger but my tab android version is foryo >>>> please i need a help
Related
Hello, i have my tab for quite a while now and I've been having this issue for months now, at first it didnt bother me but at times it gets frustrating. The thing is whenever I am using my tab, suddenly the tab doesn't respond(particularly the touch screen) and I have to lock the tab and unlock it in order to fix it. I had this issue when i was in stock 2.2 then upgraded to stock 2.3 and still had the issue. I Decided to flash with overcome 4.0 and still the issue is there, I hope someone can help me with this..
Theres a new rom out called icontact its really good and better thsm factory.im on the sprint gt so not much for me to choose from
Sent from my SPH-P100 using XDA App
can you give me the link and instruction to install the rom? thanks
If you have upgraded and tried some custom ROMs and are still having these issues, I would look into faulty hardware.
But if you want to try another ROM and have a CDMA(VZW) GT check out this custom ROM. Runs smooth and is stable and pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1325469
I recently flashed to Gingerbread on my gt p1010 using the guide found at
http://forum.xda-developers.com/showthread.php?t=1410035
Everything is fine however, like the guide mentioned, I need to reroot the phone. I tried using the Superoneclick method that I used before installing gingerbread however it doesnt seem to work. The guide mentioned doing it with CF-ROOT however there doesnt seem to be one that works for the p1010 wifi only version of the tab.
Can anyone help me out?
My gt p1010 info
Firmware 2.3.6
Kernel version 2.6.35.7-CL749223 [email protected] #1
Build number GINGERBREAD.XXKPG
http://forum.xda-developers.com/showthread.php?t=1386643 this one here works, it has some random reboots using root functionality, but it works
moxtrom said:
http://forum.xda-developers.com/showthread.php?t=1386643 this one here works, it has some random reboots using root functionality, but it works
Click to expand...
Click to collapse
This worked. Thank you. One more question if you don't mind.
A new clockwork mod manager was installed using the cf-root you linked. However when I open it it tells me that I'm running a different kernel and that several features have been disabled. Is possible for me to flash a different kernel to gain the usage of these features?
Tecagaste said:
This worked. Thank you. One more question if you don't mind.
A new clockwork mod manager was installed using the cf-root you linked. However when I open it it tells me that I'm running a different kernel and that several features have been disabled. Is possible for me to flash a different kernel to gain the usage of these features?
Click to expand...
Click to collapse
I wouldn't right now. Wait on the real port of CWR that motafoca is working on. Be patient.
workdowg said:
I wouldn't right now. Wait on the real port of CWR that motafoca is working on. Be patient.
Click to expand...
Click to collapse
I wasn't aware of this. Thank you.
Yeah..custom recovery base on kpo would be nice...
Sent from my GT-S5300 using Tapatalk 2
Hi everybody.
I just bought my very first tablet- a GT p1000.
Now, in the past few days I've been watching vids about CM9, which I find extremely cool.
As I gather, it is nowhere near completed yet tho.
So, in the meantime, could you suggest some decent looking and 100% working rom for my tablet?
You gotta admit, this forum is not very search friendly.
I have official Froyo installed as of right now, which is not very nice.
Thanks in advance and sorry for bothering ya'll.
Cheers.
just go to the dev thread and see the most popular posts there.
I think Overcome 4.1 is most popular.
You can try Hyperdroid and Accudroid too. All are GB ROMs.
Hi, I'm a newbie as well. Flash mine with Overcome 4.1 and then Hyperdroid a few days later.
My suggestion as a newbie is to use overcome 4.1 if u don't want to use stock rom.
I use Hyperdroid coz using Overcome, I have wifi disconnecting on it's own same like when I use stock GB 2.3.3
PS: Should u choose to use Hyperdroid, mind u it's a very slim rom, many of the standard app is not installed by default. But you can always install the removed applications manually. Hyperdroid has a zip file containing all the standard removed applications.
wuf31 said:
Hi, I'm a newbie as well. Flash mine with Overcome 4.1 and then Hyperdroid a few days later.
My suggestion as a newbie is to use overcome 4.1 if u don't want to use stock rom.
I use Hyperdroid coz using Overcome, I have wifi disconnecting on it's own same like when I use stock GB 2.3.3
CUT
Click to expand...
Click to collapse
Thanks both for the suggestions.
I checked both out already.
I also checked aestethic only personalisations via apps and themes and I have to say they're pretty nice too (might just do that while waiting for CM9 in a few weeks).
Is it true tho that official GB has wifi problems?
That's worrying, since I'll be using wifi most of the time.
Wifi issue is hit and miss.
Maybe it is wifi router dependant. Maybe 10%-20% has it.
I am fine using overcome 4.1 with 3 different wifi router.
Sent from my GT-P1000 using XDA App
wifi issue was 100% caused by belkin router.
If you do have belkin router, see this: http://forum.xda-developers.com/showthread.php?t=1441040&highlight=wifi
If you have different router, there shouldn´t be problems with wifi
DKStalker said:
wifi issue was 100% caused by belkin router.
If you do have belkin router, see this: http://forum.xda-developers.com/showthread.php?t=1441040&highlight=wifi
If you have different router, there shouldn´t be problems with wifi
Click to expand...
Click to collapse
Thanks for the info.
I have Netgear both at home & workplace.
Not a pressing matter after all anyway as I found out:
I managed to get a 3gb/month with no overlimit charge (only slower speed) for 5 euros/month. That'd should be plenty.
Pretty nice.
Sorry again, but what is the maximum size micro sd I could use on the P1000?
Is it 32 or 64gb?
Thanks.
Marcus.85 said:
Sorry again, but what is the maximum size micro sd I could use on the P1000?
Is it 32 or 64gb?
Thanks.
Click to expand...
Click to collapse
i think its only 16/32gb
i am a newbie as well.... 1st time android user.... bought the unit from my friend and am not sure if this phone is rooted or not... how will I know...
Here are the details on my unit.
Unit: Samsung P1000
Firmware Version: 2.3.3
Baseband Version: P1000DXJPC
Kernel Version: 2.6.35.7 / [email protected]#8
Build number : GINGERBREAD.DXJPC
Any advice on what to do before I root my phone... how will I switch back to my old O.S if I rooted my phone... I am from philippines and I read that there are different versions of baseband am I using the correct one???
Also tried updating my uni from KIES but it failed. Said failed to update... Any idea what happened?
Thanks and more power
klpangan said:
i am a newbie as well.... 1st time android user.... bought the unit from my friend and am not sure if this phone is rooted or not... how will I know...
Here are the details on my unit.
Unit: Samsung P1000
Firmware Version: 2.3.3
Baseband Version: P1000DXJPC
Kernel Version: 2.6.35.7 / [email protected]#8
Build number : GINGERBREAD.DXJPC
Any advice on what to do before I root my phone... how will I switch back to my old O.S if I rooted my phone... I am from philippines and I read that there are different versions of baseband am I using the correct one???
Also tried updating my uni from KIES but it failed. Said failed to update... Any idea what happened?
Thanks and more power
Click to expand...
Click to collapse
Hi,
Good starting point here http://www.teamovercome.net/p1000/?page_id=17
Cheers
Thanks mate... on going downloading....
Nubie too , just rooted my gt-p1000 yesterday with superoneclick ..
Now what should I do to flash a custom rom ?
How to get a custom recovery flashed in my gtab ?
Readed some pages & I've been noticed that ClockWorkMod recovery only a beta state and I've been searching for an answer on how to get cwm recovery but still no clear clue on it ..
schrickz said:
Nubie too , just rooted my gt-p1000 yesterday with superoneclick ..
Now what should I do to flash a custom rom ?
How to get a custom recovery flashed in my gtab ?
Readed some pages & I've been noticed that ClockWorkMod recovery only a beta state and I've been searching for an answer on how to get cwm recovery but still no clear clue on it ..
Click to expand...
Click to collapse
Hi
Here is a good starting point http://www.teamovercome.net/p1000/?page_id=21 and you dont need to change the CWM it works fine.
Cheers
thanks for the reply ..
I'm downloading all the neccesary files on the link above, still waiting for completing ..
the problem is I never flash this gtab before so it not containing any cwm recovery yet , so if flash with overcome would it gives cwm recover to my gtab ?
just notice few things on the link above ;
1. it contain gingerbread rom , my gtab already on gb , should I still do this ?
2. it have No_wipe & Wipe versions , which one should I use ?
is this just to get cwm recovery ?
schrickz said:
thanks for the reply ..
I'm downloading all the neccesary files on the link above, still waiting for completing ..
the problem is I never flash this gtab before so it not containing any cwm recovery yet , so if flash with overcome would it gives cwm recover to my gtab ?
Click to expand...
Click to collapse
Hi,
If you flash the gingerbread safe and the overcome kernel as descript in the how to you will get CWM.
Cheers
thanks for replying again ..
ok , then I only need to flash those 2 to get cwm ...
could you suggest me a custom rom ?
which one is the better with fewest bugs ?
schrickz said:
thanks for replying again ..
ok , then I only need to flash those 2 to get cwm ...
could you suggest me a custom rom ?
which one is the better with fewest bugs ?
Click to expand...
Click to collapse
I can't say, read the threads and take your favorite rom and flash that one first and try others as well before you setup your Phone to use it everyday so you will know what is available and works for you.
Cheers
thanks acubens ,,,
I've successfully flashed it ..
Now I had CWM recovery on gtab ...
schrickz said:
thanks acubens ,,,
I've successfully flashed it ..
Now I had CWM recovery on gtab ...
Click to expand...
Click to collapse
Good to hear it worked out for you , dont forget to try my rom
Cheers
Hi all,
I just flash ICS ROM cm9.0.0-p1n on my Galaxy Tab P1000N, but now the touch screen is not working. I've installed others ICS ROMs with the same outcome, and when I go to stock ROM touch screen works again. I have read that might be a problem with the touch screen driver but I haven't found a solution.
I can go to recovery and download mode but I was wondering if there is a way to fix this without having to flash stock ROM again.
Thanks,
TimMcCoin said:
Hi all,
I just flash ICS ROM cm9.0.0-p1n on my Galaxy Tab P1000N, but now the touch screen is not working. I've installed others ICS ROMs with the same outcome, and when I go to stock ROM touch screen works again. I have read that might be a problem with the touch screen driver but I haven't found a solution.
I can go to recovery and download mode but I was wondering if there is a way to fix this without having to flash stock ROM again.
Thanks,
Click to expand...
Click to collapse
Are you sure you flashed the correct kernel
Sent from my GT-P1000
that was what I was thinking.
what if your tab is actually a P1000 and not P1000N, is that possible?
priyana said:
that was what I was thinking.
what if your tab is actually a P1000 and not P1000N, is that possible?
Click to expand...
Click to collapse
At first I flashed the wrong kernel (p1000) and then I flashed the right one after that, big mistake! I had to return to stock and then flashed the p1000n kernel and is working fine now.
Thanks.
Sent from my Amazon Kindle Fire using xda app-developers app
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
No reply?!
Could anyone please help?
Hi,I'm not going to be much help as I'm a noob myself but I can say I had same stock laggy gt 19000 which through like u said a lot of confusion about rooting and ROMs researching XDA and YouTube you can do it my galaxy s is like a new phone so stick with it,one tip is always stick to you model and kernel version and write things down and I hope it goes as well as it did for me. Btw I used Odin 3.1 and clockwork to root and Flashed ROM with Cm 10.1 stable.
Sent from GT-19000 CM 10.1. stable
saiko7 said:
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
Click to expand...
Click to collapse
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
The Tox said:
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
Click to expand...
Click to collapse
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
saiko7 said:
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
Click to expand...
Click to collapse
The right CF-Root is in the seond to last post on the first page I believe- if you can fnd the one for XXJW4, the one you need is right above it
Custom ICS/JB roms are definitely smoother in many ways, although bear in mind because stock Jelly Bean don't include them, both FM Radio and 3G video calling won't work by default (two features of stock roms, I guess AllShare is another if you use it like me). Otherwise every other function is stable and rock solid. Except for the CM10.2 builds, which are still in an initial stage, the JB roms here should have everything working fine.
Sent from my GT-P7510
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
saiko7 said:
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
Click to expand...
Click to collapse
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
The Tox said:
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
Click to expand...
Click to collapse
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
Because I'm a person who 1.) doesn't use too many apps and 2.) tries to be as economical as possible, I don't have a large amount to backup. My contacts and calendar are always through Google, and for SMS I use SMS Backup and Restore on Play Store. Call log I don't keep, because I'm not a person who really cares for call logs. I only have one other app, Colornote, and that's cloud-synced as well.
Everything else I need is in internal storage :3
Sent from my GT-P7510
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
I use G CLOUD BACKUP just for Sms and system settings
Sent from my GT-I9000 using xda app-developers app
More or less similar situation as TS
Hey guys,
Im in a more or less similar situation as the topic starter. My Samsung Galaxy S GT-I9000 has gotten slow and unresponsive with time.
I would like to update to a custom ROM, and got a little curious about the Slim Bean. But I feel a little unsure about how to proceed.
I'm currently running a custom Gingerbread 2.3.3 ROM, my device is rooted. I flashed this ROM from the Froyo that came with the phone about 2 years ago. It's been so long since I flashed this, I need some directions, as Im afraid I will brick my device.
When I go to recovery mode I see it runs ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix.
Can I just put a Slim Bean 4.2 android version on my internal sd card and run "install zip from sdcard" in ClockwordMod? I would prefer to flash the latest stable version of Slim Bean, which would that be 4.2.2.build7-OFFICIAL?'
Any help would be greatly appreciated,
Bootism
Best way to update from gb or even older to jb is imo the way over cyanogenmod.
Follow this tutorial for 10.1: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
And then you can upgrade via cwm to the very good slim bean.
Sent from my GT-I9000 using xda app-developers app
Thanks for the answer!
I recall reading about lots of issues with the lagfix and flashing ROMs. My file storage system is in ext4 instead of standard rfs, I think I should somehow undo this if I recall correct. Is this true?
Do you have an option to unlagfix in recovery?
Sent from my GT-P3110 using xda app-developers app
Yeah, I can choose "voodoo lagfix" in recovery.
It has the following options:
- disable lagfix
- enable lagfix (default)
- /system lagfix on (default)
- /system lagfix off
- debug off (default)
- debug on
Enter disable lagfix and reboot
Sent from my GT-I9000 using xda app-developers app
Ok, so I got Cyanogenmod 10.1.0 running! so far so good
Good job. Now you can flash a zip in cwm.
Sent from my GT-I9000 using xda app-developers app
Yeah, it's a whole new world opening up. Old phone runs relatively smooth, at least way better than before thanks for helping. I will stay on this Cyanogenmod for a bit and explore. Can I just flash in any of the ROMs as .zip in CWM later? I will look for a lightweight ROM for my old phone, any suggestions?