Help in programming LG Revolution (VS910) - LG Revolution

Hi!
I need some advice here...
Which QPST version I need to program this phone...I realize QPST 2.7.3xx read the phone parameters (kinda) but I can't save them...so which is the right one?
Also is there an NV parameter to block (change to 0) the 4G Card? Just like the one in HTC Thunderbolt 4G?
Thanks for any help you can provide me

Search the forums for a tool called LGNPST. It's a sticky at the top of the dev section. It does a lot of what QPST does and is the recovery tool for flashing firmware.

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A

lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
Click to expand...
Click to collapse
Well thanks but I don't get it, some people tell me this question don't goes at Q&A and send me to Programming and you tell me is not here??!?!

Well I hope somebody can help me with this...
Is there an NV to edit for bypass @vzw.com default parameters and write mine?
Is there an Working version of QTSP I don't know wich one is for LG Revolution?
I usaed 355 but don't save any change at AAA and others.
Thanks in advance.

Related

Need help with some terms..

hi..
i just got my wing yesterday and i want to flash a new rom on it.
i was trying to learn as much as possible before my phone got here, but i still dont know too much
ok, so what is a SPL?? i saw one rom that said if you dont have an SPL of 4.0 or something like that dont use it.. i have a clue as to what that is or what mine is
what is overclocking?? do I NEED to do it??
what is the easiest (or has the easiest UI) reg editor??
are their any extra programs i might need to flash a rom on my phone??
This is the wrong forum to post your questions.
It's only about ROM developing.
The Herald mobile 6 forum would be the appropriate place to go.
There you will find all the information you need.
The forum moderator papamopps collected all the important stuff for beginners
and unexperienced users coming to the Herald/Wing forum.
Here is the compendium:
[UPDATED] >> !! - ALL Important LINKS - !! < > !! Noobs and ALL read carefully !! <<
Please get familiar on how and where to post your questions, ideas, solutions, etc.
Enjoy your time here at xda-dev.
hello and thank you for moving my thread to the appropriate forum
i read that whole thread that was posted above with all the links first before i posted and it didnt answer any of the questions I asked.
so can anyone please answer them for me? Thank you

2.3.5 Update how to install

does any one know how to install the new update that was released on 10/8/11 here is the website http://droidangel.blogspot.com/2011/10/i897uckj2-at-samsung-captivate-android.html need help please and thank you or if there is and other thread can you post a link to it here
this is NOT the questions and answers section.
GO TRY AGAIN!
xCRZYx said:
does any one know how to install the new update that was released on 10/8/11 here is the website http://droidangel.blogspot.com/2011/10/i897uckj2-at-samsung-captivate-android.html need help please and thank you or if there is and other thread can you post a link to it here
Click to expand...
Click to collapse
There are instructions everywhere on how to flash it. Also, thats an old version, the new KJ3 released today
step 1. dont post questions in dev forum
step 2. ???
step 3. profit
I'll get straight to the point....
Despite stickys and forum announcements most of us are still finding ourselves becoming terribly, terribly vexed at the amount of [Q]'s cluttering the dev section...
Therefore, from now on, if you do not follow the rules outlined below, you will be infracted. Break them again and you may find yourself unable to post anything at all on any forum!!
[Q]Surely thats a bit harsh aint it??
[A]Not really....
We've tried to be nice about it but that clearly doesnt work.
If you cannot read and abide by the simple rules in this sticky then I dont know how you're going to manage to hack your device without running into trouble.
The Dev section is NOT for asking questions.....
The Dev section is NOT for general topics..........
All threads posted MUST be prefixed with a description of the thread, [ROM] / [Kernel] etc etc.....*
*(Not planning on being particuarly strict on this. You guys (the devs), know how to title a thread.... just a pointer for new devs.)
Basically, unless your thread is to actually release something or discuss something of a very technical and n00b unfriendly nature, it doesnt belong here!
Pretty simple really.....
If you see something that shouldnt be here then PM me....
I will try to check in as reguarly as I can but I have a few sections to keep an eye on and believe it or not, a life outside XDA
Yes thats right, there is life outside XDA
Click to expand...
Click to collapse
This is a direct quote from the sticky at the top of this forum. Read around before you post. This would have been received much better in the Q&A Forum. Because its a question. And nowhere close to a development.
Thread locked. xCRZYx, post your question in the Question and Answer forum. This is development only.

Original ROM

I want to install original Samsung Rom. Who can help me, please!
Txs a lot!!!
Sorry if I posted in rong forum area, but my english is not so good!
felixgeorgescu said:
I want to install original Samsung Rom. Who can help me, please!
Txs a lot!!!
Click to expand...
Click to collapse
i can help you a lot please read this http://forum.xda-developers.com/showthread.php?t=1321268
there are many threads here in Xda where users have written guides and tutorials to help new members. My advice would be to search and read everything concerning Flashing Roms because this will help you in understanding how NOT to brick your phone. If you don't understand, ask questions on the relevant thread so that members can help you.
Check these threads for a start and use the search tool for more infos :
http://forum.xda-developers.com/showthread.php?t=1770099
http://forum.xda-developers.com/showthread.php?t=1424997
http://forum.xda-developers.com/showthread.php?t=1329360
felixgeorgescu said:
Sorry if I posted in rong forum area, but my english is not so good!
Click to expand...
Click to collapse
very wrong forum in fact, the general rule is "if you didn't create it, it does not belong to development",
use the warning sign icon in top right-corner of your original post to report and ask the mods to move the thread to q&a forum
Try rocket rom, is sooooooo original. It's the only 4.03
Thread moved and closed
Questions never belong in General.
You've been given the answers you need, do your own research and study before flashing anything.

Please help my SCH-I800

Hello,,,
I have a Galaxy Tab 1.
Company VERIZON
The device number SCH-I800
I'm looking for ROOM suitable for this release, containing the Arabic language.
XDA-Developers forum isn't the proper place to get a room, go to a nearby motel/hotel and get one.
If you're looking for a custom firmware, some searching won't hurt.
Also, you posted this in the wrong sub-forum, this is for Development, not questions.
Thread moved.
Firstly as cdesai has said you posted in the wrong forum, the development forum isn't for questions which is why there is a Q&A section and also you should try to search the forums as there are plenty of ROM's you can look at and see if they have Arabic support mentioned.
When you post please give the thread a suitable title to help others see what your issue is at a glance and then they can come in and assist you.
Some advice would've been to name your thread as I800 ROM with Arabic support needed or something along those lines.
I've left it open for now but please make sure you always search before posting questions as it's part of the XDA Rules.
Thanks
AvRS

[Q] Cifs Manager / nls_utf8.ko / CM10(Invendor)

Hello
i have a small problem and i need your help.
I have installed CM10 (Invendor Alpha5) on my I9001
I have mounted a NAS drive with Cifs Manager.
It works fine but i have a Problem with the german letters like ä,ö,ü
I have read that i can load with the CIFS Manager the Module nls_utf8.ko (one file from the Internet)
It will not work.
Perhaps i have the wrong module. Can someone tell me where i can find the correct one, or is there a other way necessary.
Thanks
herrm_no
How many times do people have to remind each other. DONT POST QUESTIONS IN DEVELOPMENT FORUMS!!! There is already a thread for this and its at the first page http://forum.xda-developers.com/showthread.php?t=2029211
Juhan Jufri said:
How many times do people have to remind each other. DONT POST QUESTIONS IN DEVELOPMENT FORUMS!!! There is already a thread for this and its at the first page http://forum.xda-developers.com/showthread.php?t=2029211
Click to expand...
Click to collapse
+1 my friend. will add this to the wrong post section
sent from my cardboard box using ProjectStock 4.0.4
And this is the reason we need our own q&a....
Also this user has 1 post and can post here in the dev section?
Reported this to the mods. sure wish i'm a forum moderator so that i could make a galaxy s plus q&a. Even the s advance has its own general forum.
Juhan Jufri said:
Reported this to the mods. sure wish i'm a forum moderator so that i could make a galaxy s plus q&a. Even the s advance has its own general forum.
Click to expand...
Click to collapse
Well here another person who wants to be a moderator. The I9001 forums are a mess and to sort it out for newbies is like mission impossible fourteen
Hello
i know that i have done a big error, please excuse me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:crying:
After i have pushed the reply button i have seen my error.
I wanted to delete/move it but it was too late.
It will never happen.
Now to my question
can anyone help me with the nls_utf8.ko ?
Tschau
herrm_no

Categories

Resources