Related
I have tried every process I can find in the forum regarding rooting and ADB but I cannot seem to figure this out. I would like to think that I am computer literate and that I know my way around pretty well but somehow this escapes me. I am running Windows 7 64 bit and can't seem to get anything right as far as this process goes.
Is there a rooting/adb for dummies section that someone can point me to?
the sticky wiki for guides at the top of the front page....
try to look around a little before starting new threads.
beyondinferno said:
the sticky wiki for guides at the top of the front page....
try to look around a little before starting new threads.
Click to expand...
Click to collapse
Thanks for your help...I did look around but I still can't get it to work. I've been through quite a few threads. I don't know if I'm missing something somewhere or what.
is your problem your computer not seeing the phone?
i RUU'd my phone earlier today to test out something i did, but then i found out that adb couldn't connect anymore. i'm still trying to figure it out.
Exactly what are ya having problems with?
http://forum.xda-developers.com/showthread.php?t=502010
1. HTC Sync installed?
2. Android SDK downloaded?
3. Debugging enabled on the phone?
4. is ADB showing up in the Device manager?
5. Check this thread out dealing with x64 drivers
http://forum.xda-developers.com/showthread.php?t=560962
Hmmm..
I have Win7 64bit too
I think I just downloaded the newest Android SDK and HtcSync for the Eris. It
works fine for me. What exactly is the issue? You have the phone in debug mode or whatever mode right?
some folks have used PdaNet
http://www.junefabrics.com/android/download.php
first off, I can't get Sync to work at all no matter which version I've tried. Then the drivers won't load for sdk. it just seems like nothing is working together at all.
alright, i figured it out.
uninstall HTC Sync and the HTC Drivers.
reinstall.
done.
justinisyoung said:
alright, i figured it out.
uninstall HTC Sync and the HTC Drivers.
reinstall.
done.
Click to expand...
Click to collapse
yeah just make sure you use the newest HTC Sync for the Eris!
just out of curiosity why the eris? am i going to have issues later down the road?
DanWalker said:
I have tried every process I can find in the forum regarding rooting and ADB but I cannot seem to figure this out. I would like to think that I am computer literate and that I know my way around pretty well but somehow this escapes me. I am running Windows 7 64 bit and can't seem to get anything right as far as this process goes.
Is there a rooting/adb for dummies section that someone can point me to?
Click to expand...
Click to collapse
Alright... what's your main problem? Are you not able to get the ADB driver to work with your phone in Windows 7 64 bit -- if so, do know that it is possible, because I have it working fine on my computer (Win 7 64B).
If ADB driver situation is your problem, do as follows:
1. Download the file below (to desktop for easy access - This is the Vista 64 bit Drivers)
2. Unzip
3. Go to Device Manager
4. Find ADB (It should come up as ADB with a Yellow Exclamation mark next to it)
5. Right click on it, choose update driver
6. When it asks you to auto find the driver or browse for the driver -- choose BROWSE.
7. Set the path to where you downloaded the file, and then click next.
8. If done correctly, you should see a window pop up that says "Successfully installed My HTC driver".
ADB will work after that is complete. To test, open CMD - go to androidsdk\tools folder, and then run adb devices (If serial # appears, there you have it).
Also with the method above, this will allow the HTC Sync application to work as well.
Source: ME, tested extensively and more than once.
DanWalker said:
just out of curiosity why the eris? am i going to have issues later down the road?
Click to expand...
Click to collapse
HTC Sync for the Hero was released before Win7, so the Vista drivers will work but you have to jump through some hoops.
Now the Eris version is the same HTC Sync but it has drivers for Windows 7, it is the same software but is bundled with newer drivers.
Roger that guys, thanks for the help. I will attempt tonight when I get back to my computer.
Ok just got home and am doing the suggested things, after installing the SDK it wants me to install packages and when I choose cancel, windows says the program was not installed correctly. what do i need to install?!
Also no ADB in device manager!
yeah they took out the packages of the SDK, so you have to add them in as needed.
I have a 2nd Win7 box that's an Android virgin, I will try and run through the install tonight(off at 5pm PST)when I get home and I'll document the install.
hang in there.
rlaxton said:
yeah they took out the packages of the SDK, so you have to add them in as needed.
I have a 2nd Win7 box that's an Android virgin, I will try and run through the install tonight(off at 5pm PST)when I get home and I'll document the install.
hang in there.
Click to expand...
Click to collapse
That would be awesome, I'm at the point where I am just about to give up. I have never been so frustrated with a computer. This is the first Windows 7 system I have done anything with and I already don't like it.
DanWalker said:
Ok just got home and am doing the suggested things, after installing the SDK it wants me to install packages and when I choose cancel, windows says the program was not installed correctly. what do i need to install?!
Also no ADB in device manager!
Click to expand...
Click to collapse
Install packages? What? Weird, the Android SDK is natively 32 bit, but will work in Windows 7 64 BIT (That's what I'm running now).
Alright, steps to take:
1. Uninstall/remove everything you did before.
2. Grab the Windows Android SDK -- download it (to the desktop is fine)
3. UNZIP/Extract the SDK
4. Drag the Android SDK to the root of your drive (Local Disk C: )
5. For easy access purposes, RENAME the Android SDK from what you see to something like: androidsdk
6. Open Command Prompt
7. Verify that you can get to the "androidsdk" directory by running the command: cd androidsdk\tools
8. If you can get there -- then good, so far.
9. Now to test "adb" -- Have your phone connected to the PC.
10. While still in command prompt and STILL in the c:\androidsdk\tools: dir... run command: adb devices
11. This should return your Serial #
12. If your serial # shows up, then make sure you can run the command adb shell and see if you get the # sign, which indicates that you are rooted -- If not, then you need to begin the process of rooting your phone.
Also, if ADB doesn't work after this point, do what I told you earlier, I can guarantee that it does work, because I actually did it this morning on my work computer (Which is Windows 7 64 Bit).
Good luck, report back.
Holy crap it looks like it worked!! Thanks Pseudo! Now if I could only get my damn phone to find Sync I'd be all set.
Still can't get sync to register with phone but that's no biggie. But have a small issue that I dunno where to look to find an answer. I'm trying to update my recovery from 1.5.2 to 1.6.2 and can't seem to follow the directions appropriately.
via adb -> Requires a custom recovery (with test-keys)
Code:
Copy recovery-RA-heroc-v1.6.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
None of that seems to work lol.
So since we're on the subject does anyone know how to set up the drivers for linux mint kde? I'm brand new to linux and I've managed to do some things but that is just one thing that i cant do so far and after almost a day pf searching this forum and others i just cant seem to get it
DanWalker said:
Holy crap it looks like it worked!! Thanks Pseudo! Now if I could only get my damn phone to find Sync I'd be all set.
Still can't get sync to register with phone but that's no biggie. But have a small issue that I dunno where to look to find an answer.
Click to expand...
Click to collapse
First off, no problem for the help -- glad it worked. What ROM are you currently running, that would be helpful in solving your sync issue.
DanWalker said:
I'm trying to update my recovery from 1.5.2 to 1.6.2 and can't seem to follow the directions appropriately.
Click to expand...
Click to collapse
Alright, lets begin - To upgrade to RA 1.6.2, (You have to be in recovery mode (Home + Power) -- and also have your phone connected to the PC). Then do as follows:
1. Download the 1.6.2 file
2. Copy or move it to your androidsdk\tools folder
3. Run commands below:
Code:
adb push recovery-RA-heroc-v1.6.2.img /sdcard
Code:
C:\AndroidSDK\tools>adb shell
Code:
mount -a
You'll probably get the next line below -- that's okay.
Code:
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
Keep going...
Code:
flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
After you do this, the shell should return #, if it does, then run:
Code:
reboot recovery
Now verify that your recovery says 1.6.2.
Good luck.
thatguythatdid said:
So since we're on the subject does anyone know how to set up the drivers for linux mint kde? I'm brand new to linux and I've managed to do some things but that is just one thing that i cant do so far and after almost a day pf searching this forum and others i just cant seem to get it
Click to expand...
Click to collapse
Well, since you've asked a good question, I shall direct you in the right direction. Linux Mint is a derivative of Ubuntu, so this guide should work for you., however do note that I have not tested this in Linux Mint, as I currently run Ubuntu 9.10, but you should be okay.
Go HERE and bookmark this page for reference, it has some good stuff -- Now this guide is not directly for our phones (CDMA HERO), however the directions, if followed correctly... DO WORK and have been tested by me (did this last night) with successful results.
When you get to the web page, start at "Generic Linux Instructions". Also, when you get to the heading "Set up ubuntu to recognize your phone, and the adb/fastboot commands in the terminal" -- step 4 will ask you to create an empty file, use the Ubuntu 9.10 format and NOT the older versions, again this format should work in the latest version of Linux Mint.
Hope that helps. Also, if have problems or want a step by step tutorial (pending how "new" to Linux you are), just ask me or PM me, I'll write one up.
First off sorry I'm sure flammage is coming but I've looked and looked through google and through xda my last ditch effort is to make a post.
I can not get windows 7 to recognize my I've downloaded the latest SDK with usb drivers but each time I try and update drivers I get "windows has determined he driver software for your device is update. Please help me
Go look for the PDANet drivers. You may have to actually install PDANet, but it's painless. Install those drivers, and adb will work for you.
This is mentioned in various stickies and other guides around the board.
This option didn't work please help pda install but didn't overwrite the driver
You need to reboot and hit f8 I believe, then choose the option to allow installation of unsigned drivers. Then try to reinstall the drivers when you boot
Download an application called "USBdeview", which will let you view/modify the drivers for all devices regardless of whether they're attached or not. Find all the drivers related to Android, HTC, NexusOne, and adb, and delete them. Then install pdanet, and don't connect your phone until it instructs you to.
Windows 7 does not allow the installation of unsigned drivers unless the option is disabled on boot
disgustip8ted said:
Windows 7 does not allow the installation of unsigned drivers unless the option is disabled on boot
Click to expand...
Click to collapse
I'm 95% sure that's only for the 64-bit version of Windows - Vista had the same requirement.
There are ways around it, such as using the Driver Signature Enforcement Overrider application (DSEO), or just manually configuring your computer to run in test/debugging mode.
At any rate, I don't think that you should have any issues with the PDANet drivers, as I installed them on my Win 7 Pro x64 OS before I had disabled driver signing (I did that later to screw with some homemade video drivers).
More detailed instructions on getting the drivers working are available here.
codesplice said:
Download an application called "USBdeview", which will let you view/modify the drivers for all devices regardless of whether they're attached or not. Find all the drivers related to Android, HTC, NexusOne, and adb, and delete them. Then install pdanet, and don't connect your phone until it instructs you to.
Click to expand...
Click to collapse
Thank you so much for this help all I had to do was download usbdeview the actual program it self told win 7 what to do so now my nexus one works on win 7, thank you!
No problem! Glad I could help
codesplice said:
I'm 95% sure that's only for the 64-bit version of Windows - Vista had the same requirement.
There are ways around it, such as using the Driver Signature Enforcement Overrider application (DSEO), or just manually configuring your computer to run in test/debugging mode.
At any rate, I don't think that you should have any issues with the PDANet drivers, as I installed them on my Win 7 Pro x64 OS before I had disabled driver signing (I did that later to screw with some homemade video drivers).
More detailed instructions on getting the drivers working are available here.
Click to expand...
Click to collapse
well played, i think youre correct.
ill have to grab that util for work...
disgustip8ted said:
well played, i think youre correct.
ill have to grab that util for work...
Click to expand...
Click to collapse
DSEO is a pretty nifty utility for sure. Provides easy one-click (okay, a few clicks, actually) access to disabling the driver signature enforcement - and even an easy way to eliminate the "Test Mode" watermark that would appear in the bottom-right of the desktop while operating in Test Mode.
There are other methods to bypass the signature enforcement without turning on Test Mode, but I've found that to be the best option. Other approaches use a boot-time hook to basically insert the F8 (and other keys as appropriate - down, down, enter or something like that) keystrokes to "automanually" disable driver signature enforcement for that boot. Any third-party application that accesses things that early in the boot process makes me a bit nervous!
Hello
Im brand new to Android and adb/fastboot.
I have looked at tutorials on youtube all day, and for everybody else their devices just pops up when you type adb devices.
I get nothing
I have done it correctly, because I get all the commands when I type adb/fastboot.
Im running windows8, could that be the problem?
Do I need some kind of extra USB drivers for my google glasses?
I do find my glasses as a camera tho.
EDIT:
So after watching a few more tutorials I understood my problem. Its windows8 usb drivers thats not correct.
I have tried to install correct drivers and edit the .ini files that need editing, but now I encountered a new problem.
Windows wont let me install correct usb drivers for google glass.
When I have device manager open, windows have already installed them as “Portable device – Glass1″
I click uninstall and they disaper from my device list, once I click “scan for new hardware” I can see that they reapper on my device list as other devices. Within 2sec windows autoinstall them as “portable device -glass1″ again.
So I try “update driver software” but this dont work either, I select the correct file and path, but I keep getting this message “windows has determined the driver software for your device is up to date”.
Im running windows8.
Any help is appreciated.
EDIT2:
As far as all the tutorial movies tell me to disable driver signing I have done so.
If all of the adb commands were working, then chances are you need to enable debugging on your Glass. Settings >> Device info >> Turn on debug
Update:
The way to bypass windows8 and installing usb drivers, is that I need to use the option "Have Disk" and then install usb drivers that way.
All works fine now.
Ouya SuperScript
By TehCrucible
v0.1
INTRODUCTION
So I originally wrote this batch script to simplify and combine some of the most frequently used tweaks on the forums for my own sake, to speed up my tinkering with the Ouya but I've decided to clean it up and upload it in case anyone else wants to use it.
This script is designed as a "one-click" modification tool for a stock Ouya on the latest firmware. Please read this guide carefully.
I ACCEPT NO RESPONSIBILITY FOR ANY DAMAGE OR DATA LOSS. This script is built on the work of many others much smarter than myself and be sure to check the credits.
SO WHAT DOES IT DO?
In a nutshell:
- Install Clockworkmod Recovery
- Root Ouya
- Install Xposed Framework
- Install Google Play Store
WHAT DO I NEED?
- A Windows PC. I have included drivers for both x86 and x64.
- A Micro USB cable.
INSTALLATION OVERVIEW
1. Update your Ouya to latest stock firmware
2. Install ADB drivers
3. Run the script
4. Play some games!
There's a more detailed step-by-step in the included README.txt file.
KNOWN ISSUES
- None
CREDITS & THANKS
WonderEkin
mybook4
elmerohueso
fatesausage
DOWNLOAD
Here
Thanks a lot for this. A lo of people have been asking about an automated method to get the play store running on the OUYA...
Great works. I just think of root my ouya....
A quick update:
It's working. I'm on the latest firmaware which is JZO54L-OUYA, kernel version 3.1.10-g780994a. Completely stock, but I had already rooted my OUYA.
Anyway, I enabled the Wireless ADB which will instantly show you the ip and port, installed the drivers for 64bit. Then open CMD and type: adb connect "iport"
Then I ran the superscript and everything went fine.
Hope this helps. I didn't even have to connect with a wire.
But I guess if you wanna install the CWM recovery you should be connected with a wire...
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
Did you install the drivers right? If yes, then you should open the folder where you extracted your files and right click while holding shift then choose open CMD here. Then write: adb devices
If your device is there, it will give you an output of the IMEI and name of device
From there, you can then tell us what the error is and hopefully we can resolve it...
zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
that happened to me yesterday, but I overcame it by have my computer plugged into the Ouya then reboot the ouya and as soon as the computer recognized it started the script and it worked.
but I have an issue too
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesnt recognize the ouya....
unkoil said:
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
Click to expand...
Click to collapse
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
TRMB said:
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesn't recognize the ouya....
Click to expand...
Click to collapse
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.[/QUOTE]
I have tried both from my windows 7 computer and 8.1 laptop. It showed up just as you said "missing driver", sent it to the drivers part of SS to get the driver, it said it installed but when i run the SS and hit option "1" it comes up blank...
ahmadshawki said:
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
I am having the same issue but not only with this method, I have also tried to install CWM with oneclicks auto and manual method to no avail.....
any suggestions?
Click to expand...
Click to collapse
always says it installed but will only boot into stock recovery
TRMB said:
always says it installed but will only boot into stock recovery
Click to expand...
Click to collapse
I can see from your posts that you tried everything and I'm so sorry that I'm just a user and not a developer or something. May be you can try sideloading terminal and try CWM manually (if you haven't already) or sideload ROM Toolbox and try the flash recovery option.
That's all I got. But if I were you, I won't bother about the CWM at all. It's useless.
As for the Play store, try the mod that I attached in my reply and let me know if this one works for you...
Unfortunately the link is not working. Is it possible to update it, please?
What I do if my micro usb is broken :/. I only have wireless adb
.. nice .. now my ouya will run again .. thanks
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
vinirockman said:
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
Click to expand...
Click to collapse
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
vinirockman said:
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
Click to expand...
Click to collapse
.. CWM need wired usb keyboard no navigate .. i don't remember if it can do it via bluetooth
I cannot possibly figure out what the heck is causing my Windows 8.1 Installation to not detect my Nexus 6. Google comes up with TONS of results for this issue, but all troubleshooting points to what I have already done.
Plug it in, comes up as "Nexus 6" under "Other Devices" in Device Manager. With the little Yellow ! mark.
Downloaded the USB drivers from here - http://developer.android.com/sdk/win-usb.html attempted to install them and I get an error message. After selecting the folder that contains the driver.
"Windows was unable to install your Nexus 6: Windows could not find the driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software"
What I have Tried:
- Installing Drivers with USB Debugging ON and OFF
- Installing Drivers with Connection set to MTP and PTP on the phone
- Disabled Driver Signature Enforcement and attempted to install.
- Downloading Drivers a second time to ensure no corruption was in the file.
- Attempted to install via Android SDK (This appears to work per SDK software, but Device Manager shows no change, and the nexus isnt showing up in Explorer.)
- Tested Nexus on another Device. (Running Windows 7. Literally Plug and play No manual Installation needed. Worked)
I'm at total Loss here, Any other Ideas?
@morbid_bean,
Did you try the Motorola Device Manager >https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Thanks for the reply. Unfortunately that seems to have done nothing
I'd go w/ uninstall all other drivers first, change cables and see what happens.
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
morbid_bean said:
Thanks for the reply. Unfortunately that seems to have done nothing
Click to expand...
Click to collapse
This is a long shot, but you did install the Java JDK, right?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
You do not need the JDK to install the drivers...
efrant said:
You do not need the JDK to install the drivers...
Click to expand...
Click to collapse
I understand. OP has diagnosed his problem as drivers, but if his problem is ADB not connecting to his N6, it could be the problem. As I said, it's a long shot.
OP Here with a status update.
Continued to try some other suggestions. Such as another Cable, another USB port, reboots. Hell I seriously went as far as a whole Windows 8.1 Re-install. I had some feeling that possibility because I am rooted its causing issues; so I even went as far as taking my old Nexus 4 and reverted it to 100% stock to attempt to install the drivers and then trying the nexus 6. But I got same results.
efrant said:
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.);
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
Click to expand...
Click to collapse
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
When I installed Android SDK, it told me I needed JDK before proceeding with the installation. So I'm pretty sure I did this.
morbid_bean said:
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
Click to expand...
Click to collapse
I just realized that the last part on my step 3 was cut off. It should read:
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
As far as your issue, I'm pretty sure that Windos recognizes the N6 as an MTP device (assuming you have it on MTP) without any additional drivers, so I'm not sure what the problem is. My steps were to get the ADB driver installed, which seems to have worked. (ADB allows you access to your files via command line...)
Sent from my Nexus 6 using Tapatalk
FIXED IT!
I am running a version of Windows 8.1 known as Windows 8.1 Pro N Essentially this is a slightly stripped down version and does not include "Windows Media Player or other Windows Media-related technologies, such as Windows Media Center and Windows DVD Maker" I managed to get this copy really cheap.
More Info Here
So essentially I needed to download THIS Pack/Update which gave me these special features. Including the resolution of my Driver Problem. Rebooted the computer plugged in my phone and it was detected and installed drivers automatically.
Special Credit to THIS thread for helping me with the answer. I hope this can be added to any Driver Installation Guide or Sticky to assist others that may come across this problem.
Glad you got it resolved. I've never heard of Pro N. Another wrinkle in the Windows 8.1 driver issues, it seams.
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Pneuma1985 said:
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Evolution_Freak said:
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Pneuma1985 said:
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Click to expand...
Click to collapse
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Evolution_Freak said:
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Click to expand...
Click to collapse
I just tested it and it does not work i still get permissions denied when i try to remount it.
Pneuma1985 said:
I just tested it and it does not work i still get permissions denied when i try to remount it.
Click to expand...
Click to collapse
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Evolution_Freak said:
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Click to expand...
Click to collapse
Yup that didnt work either. I get su in adbshell it shows me # so there is su i just dont get why it wont mount at all or pull or push obviously cant do that if it won't mount. And no tutorial I've followed nor solution has worked thus far. As stated above that solution worked for him with windows media center or whatever but that doesnt apply to me. I've done this hundreds of times with many many many devices on windows 7 I've even done it with 3 devices on 8.1 so far no problems this is the only one to give me issues like this.
It's always a bit of messing around with it to get it to work but this is different i have spent hours going back and forth removing all drivers installing new ones using tools etc.