[Q] [i9001][RESOLVED]Odin stuck in flashing KQB - Galaxy S I9000 Q&A, Help & Troubleshooting

So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me

looks like the pic didn´t upload succesfully

I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible

domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...

I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001

Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001

So everything sorted?

Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep

Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??

Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk

domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.

Related

[Q] HELP HELP !!!! Looking Odin upgradable firmware

Hello all,
Bought a galaxy tab. And flashed it. With bad firmware.
I can set TAB in download mode.
So with ODIN I should be able to flash.
Can someone PLEASE!!!!?????? link me or tell me where to find A FULL EURO rom or P1000 compatible rom. That can be flashed with ODIN
Try latest Roto ROM here http://forum.xda-developers.com/showthread.php?t=939360, its okay for Euro Tab...
make a accout here, and you can choise the official firmware.
Samfirmware
Did that flashed and TAB boots and hangs at the SAMSUNG logo.
edit : DId a full whipe did not resolve hanging at the SAMSUNG logo
Used Jk5 with that. Downing Jk2 now.
ovigt71 said:
make a accout here, and you can choise the official firmware.
Click to expand...
Click to collapse
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07
ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
Click to expand...
Click to collapse
Only if he flashes one of the JMx series.
Flash the Rotohammer JMI firmware, it's a _complete_ firmware with the locked bootloader removed. If it doesn't work then you've either done something wrong (start again, read instructions carefully), or you've got a locked bootloader.
If you've already tried flashing a JMx firmware and are now having issues then you'll need to go back to whatever original firmware you had and then run the bootloader fix, which as long as you pay attention to the instructions is unlikely to be an issue, get it wrong however and you've got problems.
Also - this is not a development related question, should be in the general subforum.
TAB Dead
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.
ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07
Click to expand...
Click to collapse
Ok so you can give me a direct link to flashing boot of tab please ?
If it won't even get into download mode then there's nothing you can do to fix it, you'll have to take it back to the shop. Any fixes require being able to boot into download or recovery mode.
chetermaat said:
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.
Click to expand...
Click to collapse
Perhaps you mean the logo is phone at the left, middle is ! pc at the right, it's also a download mode, which you can flash thru odin, just flash with roto's rom, and do a repartition.
Basically if odin still able to detect your tab, it's not totally dead yet, if your tab's display is like what I mentioned above, just get roto's rom, AND MAKE SURE CHECKSUM IS CORRECT! Before flashing.
chetermaat said:
Ok so you can give me a direct link to flashing boot of tab please ?
Click to expand...
Click to collapse
Dutch!
http://gathering.tweakers.net/forum/list_message/35564050#35564050

Bricked galaxy tab 8.9 Help!

Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
TwinCalibre said:
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
Click to expand...
Click to collapse
Did you install the drivers? Does Odin find your tab?
EDIT: this http://forum.xda-developers.com/showthread.php?t=1315364 is CWM flashable firmware, you can't flash this with Odin!
Yeah it finds it, and i ahve the drivers installed, ahh how stupid of me lol, well atm im downloading the asian firmware from samsfirmware, which i will try to use, and then I will flash it with http://forum.xda-developers.com/showthread.php?t=1315364, will this work? or am i being stupid again?
Thanks for the help!
How did you brick it in the first place? What did you try to do?
If you are in Europe, why not just flash European firmware on it?
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
TwinCalibre said:
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
Click to expand...
Click to collapse
You have a WIFI only GT8.9 (P7310), correct?
http://www.hotfile.com/dl/135410941/a028c7d/P7310XXKJ4_P7310XEUKJ4_XEU.zip.html < this should work.
Check out this guide on how to use Odin > http://forum.xda-developers.com/showthread.php?t=1406137
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
TwinCalibre said:
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
Click to expand...
Click to collapse
Yes, it should work. Just make sure you download the correct files for your device.
Hi
i can borrow this tread.
I just rooted my gtab 8.9 wifi (eu)and all just fine and i install superuser and got well this time too...then i install clockwork mode and install drivers for CWM 4.0 bla bla work fine...then when i try to put tab in recovery mode goes wrong only black screen..I have tried to put tab in download mode and recovery manually Still nothing happens...only what happened is my tab going in loop to logo and again and again.
Have tried put on download mode but still black and odin don't find it.(after 5 sec in download mode then beginning looping)
Have tried put on recovery mod but still black screen and beginning looping after 5 sec.
So what to do folks? Need badly help here plz!!!
This tread i bin used to root:
http://forum.xda-developers.com/showthread.php?t=1287205
Edit: After trying and trying i made it download mode and flash off kernel and now is working
same problem
hi, I just had the same problem, I downloaded the file from hotfile, but when I try to open it with winrar it say that theres a password, anyone know which is the password please???
Samfirmware.com

Tried updating to ICS through KIES. Update failed

Hello guys.
I really need some help. Im going away for 2 weeks on 4 June. And after i come back ill be ghone after 2 days again for 2 weeks and i need my phone!
My story:
I saw an update for my phone to ICS. So i plugged on my laptop and put the update on with KIES 2.1.3.
At about 64% the update didnt go ferther and it gave an error report.
The program KIES shut down, and my phone turned off.
I putted everything back on. But now my phone says this:
''Firmware upgrade encountered an issue. Please select recovery mode in KIES & try again.''
KIES doesnt see my phone anymore. And the recovery mode i found on the internet.
Volume button up, home button+ power button doesnt work.
It keeps going to this screen.
My phone was 2.3.6 standard, non rooted etc etc.
How can i fix this fast?
I tried rooting and flashing, but i just cant do anything with my phone exept this screen i explained.
Thanks in advance.
Mitchell
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Belfia said:
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Click to expand...
Click to collapse
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
damitch300 said:
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
Click to expand...
Click to collapse
Just download ODIN app for Windows, get right stock firmware from development thread ( Dr. Ketan's post ) and flash it with ODIN. It's as simple as clicking select file and start. Everything is described in the thread with firmware downloads.
Yes. Then there is hope. Now I recommend you to try flashing one of the stock roms from dr.ketans thread in development section.
Its not very complicated. But feel free to ask if you need more help.
I just cant explain how happy i am with this forum.
Brings so much luck into live
Thanks.
Ill see if i need more help. Hopefully not.
Is there any dutch ICS rom?
Or should i stick with a basic english?
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manual. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Good thing we can help. Wouldnt call myself an expert though
damulder said:
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manuel. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Click to expand...
Click to collapse
Well i searched for hours to. My sister had her S2 upgraded with KIES. That worked, but the ICS update itself was plain suck.
I fixed it thanks to XDA forum. Nothing found on the internet exept sending to help desk.
Same with what i got now.
But now it is fixed and im thankfull to the ones helping.
Now i am willing to try ICS without KIES.
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Like i said, KIES didnt see my phone. Neither did windows.
So it wasnt an option.
Glad its fixed
Sent from my GT-N7000 using Tapatalk 2
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
damulder said:
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
Click to expand...
Click to collapse
For me this didnt work. KIES had an upgrade, but seems like it still doesnt do the job right.
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
damitch300 said:
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
Click to expand...
Click to collapse
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
ngocdao said:
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
Click to expand...
Click to collapse
W7 Ultimate N
And trying out different KIES versions.
Well at the 2nd update 2.3.6 to 4.0.3 it ran stuck again.
And now Odin doesnt do anything to aswell. Keeps saying ''Failure'' after some time.
Now ODIN is stuck at syaing ''BOOT'' above ID:COM.
How can i fix this?
Well seems like the Dutch roms aint working.
I did an European right now wich worked.

[Q] Odin stuck on every rom

Thanks everyone who helped me now I have the stock firmware 2.3.6 works fine no glitches no nothing
you can look how to solve brick threads in general section. i think repartitioning with diskpart can solve your problem
kromosto said:
you can look how to solve brick threads in general section. i think repartitioning with diskpart can solve your problem
Click to expand...
Click to collapse
I've looked into it a bit. But I think it can only partition sdcard or I couldn't find out
this may help
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
kromosto said:
this may help
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
the biggest problem on my situation is I cannot boot android to check usb debugging
i dont think it is important if you flash the kernel mentioned at the link
I had the same troubles on windows 7. odin stops randomly when downgrading from ICS. Tried it on a different pc with Windows xp en that works for me. Also you can try a shorter usb cable. it has something to do with usb communication.
Cybertom said:
I had the same troubles on windows 7. odin stops randomly when downgrading from ICS. Tried it on a different pc with Windows xp en that works for me. Also you can try a shorter usb cable. it has something to do with usb communication.
Click to expand...
Click to collapse
tried that too stuck at the exact same point. I guess I have to repartition but I cannot get root access
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
eug3n91 said:
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
Click to expand...
Click to collapse
I did manage to do things on the list of forest1971. I lost 3 gb but it is not important. and then again I didn't know what to do so I tried to install SGN_XX_OXA_KJ1_FACTORYFS rom with odin after 4pda kernel... it didn't work again Can you tell me what to do after forest1971's post?
thedeli said:
I did manage to do things on the list of forest1971. I lost 3 gb but it is not important. and then again I didn't know what to do so I tried to install SGN_XX_OXA_KJ1_FACTORYFS rom with odin after 4pda kernel... it didn't work again Can you tell me what to do after forest1971's post?
Click to expand...
Click to collapse
I really don't know what to say... For some people that worked, for some it didn't. At least it gave you a bit more control over your phone.
I think you should seek your answer either in that thread, or with the original poster of the thread.
Sorry I can't help you more than that as I haven't personally been through this...
Really hope you get your phone back and running as quickly as possible...
Best of luck!
What you need is a Pit file for partitioned disk.
Look for it and it will work with pc odin.
Sent from my GT-N7000 using xda premium
talpur1 said:
What you need is a Pit file for partitioned disk.
Look for it and it will work with pc odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks that made my day I saw Samsung and boot in progress but now I have bootloop I'm trying to figure out that now

[Q] BootLoop Problem PLEASE HELP! D:

Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app

Categories

Resources