Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck
guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?
Please help im stuck need step by step advice still a real novice ???
charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.
Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...
Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can
Related
Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
For some reason ive never been able to enter recovery using the volume+home+power button, the only way was through command prompt SDK
Now my obviously problem is, i can't boot the phone so can't reboot into recovery that way.
HELP!
goto samfirmware and download your original firmware with bootloader.
Flash via odin and it should boot you straight into recovery.
Or check out the post I just commented on in this same section.
Cheers,
BS...
Hi - can't see the bootloader on that site :S
they should all come with a bootloader, just download your original firmware.
download odin v1.3, beside the firmware you are downloading should be a PIT number.
Goto the bottom of the page and download that pit number.
Open Odin, and set your pit and pda.
Then set your phone to download mode,
connect, flash, and you should boot directly into recovery
I can't enter download mode. neither 3 button mode works, never has done, can't use up or down for recovery or download.
The only way i've ever been able to get into a recovery console was through ADB.exe which requires the phone to be booted lol.
hmm... lol I dont know man. you might need to return your phone :-(
StonoARGH said:
Guys,
Just updated to froyo 2.2 but i didn't remove the lag fix before hand...
now my galaxy S is just stuck on the S loading screen and never loads.
Click to expand...
Click to collapse
Reboot with the up button on the left, the right one, and the home one.
and then full factory reset, and cache clean.
then reboot and wait
Exact same problem here ... not luck through ADB or FASTBOOT. Stuck!
I have the same issue. Please help.
Same here...I cant get into recovery mode with the 3-button solution
I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from here. Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...
It's an utter nightmare not being able to get into recovery/download. think i'm gonna have to send it off
Brownstone said:
I killed my SGS by installing the new JP6 without removing the OCLF first! I've had no three button recovery option for yonks. After much faffing, I managed to sort it.
Here comes the science bit:
Download JG5 from . Use the ROMraid link in the Requirements section
Use Odin with the pit, PDA, MODEM and CSC files, not forgetting to tick repartition
This will get you back to 2.1, without a lagfix. Now install the newly released Froyo and enjoy.
Cheers,
BS...
Click to expand...
Click to collapse
the links for JG5 aren't working. Do you have any other?
atcasanova said:
the links for JG5 aren't working. Do you have any other?
Click to expand...
Click to collapse
The links worked for me just now...
would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.
My phone was bricked 1 month ago (no download mode, stuck immediately on power on), I didn't send it back to Samsung but I used Riff JTag to repair it and now it's running perfectly.
atcasanova said:
would you mind sending me the direct link? atcasanova at gmail dot com
thx in advance.
Click to expand...
Click to collapse
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.
Jordiharrison said:
Just try the ROMraid link under Requirements....
It does have a stupid captcha question but it eventually worked for me..
I can't post the link as it only seems to work when you click it from that webpage.
Click to expand...
Click to collapse
Damn! I'm clicking that link, witch directs me to "coblitz codeen org www romraid com paul galaxys JG5.zip"
i've tried just "www romraid com paul galaxys JG5.zip" and it redirects me to modaco dot com
What do i have to do to download it?????????
Hi, i finally completed the download, had to change some DNS and routes using some proxies
So, I'm really new to android, and i've got a few questions
1) how am i supposed to flash my Galaxy S if i can't turn it on to make my pc recognize it?
2) Brownstone mentioned PDA, CSC and MODEM files. In JG5.zip I have: CODE, CSC and MODEM files. And Odin asks me PDA, PHONE and CSC.
So how will I fill in Odin's fields?
PDA = CODE_I9000XWJG5.tar
PHONE = MODEM_I9000XXJG1.tar
CSC = CSC_I9000XXJG4.tar
??
is that correct?
Hi, i had a tab with bootloader locked and flashed pit file first then stock rom, now tab is stuck on logo and doesnt go beyond it. I can get into download mode but not on recovery mode...need help please
andrew21 said:
Hi, i had a tab with bootloader locked and flashed pit file first then stock rom, now tab is stuck on logo and doesnt go beyond it. I can get into download mode but not on recovery mode...need help please
Click to expand...
Click to collapse
Did you read one of the million other threads about "bricked" tabs?
PS. Your tab is not "bricked"
TheATHEiST said:
Did you read one of the million other threads about "bricked" tabs?
PS. Your tab is not "bricked"
Click to expand...
Click to collapse
I google this problem before posting but no solution, can you help me...i will really appreciate it
andrew21 said:
I google this problem before posting but no solution, can you help me...i will really appreciate it
Click to expand...
Click to collapse
a) Click Here
b) Choose "titles only" from the drop down menu.
c) Type "brick" into search field
d) Read
Dude, I have the exact same problem.
Made tons of searches, tried full roms, tries ROTO -full rom. nothing works..
Have tried everything, but the goddamn thing wont boot :/
Any help?
Same problem here. I even created a thread for it already recently (it's in the first page of this forum too).
Everyone out there let me know if you fix your tab and ill do the same if i fix mine..btw im sure my tab bootloader was locked since when i checked the firmware before flashing it said something like KA
andrew21 said:
Everyone out there let me know if you fix your tab and ill do the same if i fix mine..btw im sure my tab bootloader was locked since when i checked the firmware before flashing it said something like KA
Click to expand...
Click to collapse
My problem is actually a bit worse. Well, maybe. I'm stuck in the, "phone ! pc" loop. For other phones, you can just remove the battery, and then press the three buttons, but for the tab, since the battery can't be removed, I have no idea how to fix it.
You can try this, though: http://forum.xda-developers.com/showthread.php?t=939360
Here's another thread that may help you: http://forum.xda-developers.com/showthread.php?t=888071
1. Go to http://www.samfirmware.com/WEBPROTECT-p1000.htm and download the firmware for your device. (you must register first)
2 download the flashing guide and make sure you follow all the steps (without the part to remove the battery) http://www.samfirmware.com/SVC Android/P1000 Flashguide.pdf
Sent from my GT-P1000 using XDA App
Thanks everyone for help...will try all options later tomorrow and post results
Same problem here. For almost a month now my tab is stuck on boot logo. These threads don't work for everybody. Too bad.
pendevous said:
My problem is actually a bit worse. Well, maybe. I'm stuck in the, "phone ! pc" loop. For other phones, you can just remove the battery, and then press the three buttons, but for the tab, since the battery can't be removed, I have no idea how to fix it.
You can try this, though: http://forum.xda-developers.com/showthread.php?t=939360
Here's another thread that may help you: http://forum.xda-developers.com/showthread.php?t=888071
Click to expand...
Click to collapse
i have the solution on your problem igot that phone and pc icon...
all u have to do is flash the file
*open odin then connect your tab
*click repartition
*click pit then select the file u downloaded
*then click start then that's it just wait for it to pass then it'll now boot
the phone ! pc icon is also download mode so u wont have to do the download mode just connect it to you computer and make sure odin detects your tab
hope it will work for you sorry for the bad instruction
Tried your solution didnt work
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Very busy at the moment, really appreciate your help will try your solution later and post results
pendevous said:
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Click to expand...
Click to collapse
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
andrew21 said:
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
Click to expand...
Click to collapse
So you need a full flashing guide... Not to be like Atheist here, but that information is spelled out in multiple forums that I don't currently have time to track down.
Google -> Heimdall flashing instructions
http://www.google.com/search?aq=f&sourceid=chrome&ie=UTF-8&q=heimdall+flashing+instructions
Poof, first post.
Someday people will learn GOOGLE KNOWS EVERYTHING
pendevous said:
Mine didn't work with Odin too. It worked with Heimdall instead.
1. First, I downloaded ROTO JMI from this thread: http://forum.xda-developers.com/showthread.php?t=939360
2. Press the power + volume down button. It'll still have the phone ! PC icon, but it will already trigger itself to go to download mode.
3. Unzip and then extract the tar from the ROTO JMI.
4. Using heimdall, put everything inside the extracted file to its appropriate filed. You won't need the moveend.
5. Flash. Do NOT remove your tab.
6. It'll auto-reboot
Click to expand...
Click to collapse
Tried your method, still stuck on samsung logo, not working...someone please help!!
If you are certain you have tried all the methods listed above, with both hiemdall and odin, than it is amazing that it is still boot looped ...
If you have repartioned and tried a samfirmware rom, than I'm at a loss
Sent from my "better than an iPad" tab.
andrew21 said:
Hi, im using heimdall for the first time, can you tell me which files to select where and what options i need to select? Thank you.
Click to expand...
Click to collapse
When you unzip a compressed file, you will see a number of files inside like cahce, factory data, etc. Just put them in the corresponding field in Heimdall. As for the zImage file, put it under the image field.
Edit: @andrew - mine was in the logo for like 5 minutes. Even up to now it still takes around the same time to boot.
Sent from my GT-P1000 using Tapatalk
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Use odin to reflash. Search for your model than download everything and follow guide or if you have backup on your phone.
ShahirHabib said:
Guys i need help!!!
I'm a fresh new android user especially SGS+...after rooting the phone, i downloaded an app ERIS MARKET!! I tried using it everything went so good then it asked me to restart the phone...and that's it!!! it shows the samsung logo then galaxy s plus then turns off again and again samsung logon..samsung s plus and so on...!!!
I tried the factory reset but nothing happened!!
Now i've lost all the data and had my phone bricked ((
Any help??
Click to expand...
Click to collapse
Hold on, you are not totally bricked as such, if your phone can still boot up like that there is still much life in it. in this case Odin is your buddy. Download your stock firmware according to your region (im not sure if im allowed to post links to other sites, so i wont),
Download Odin (find out how to use it, with the PIT file and your Stock ROM)
Launch Odin (from your PC ofcoz)
Switch off your phone by removing the battery
Put the battery back in, hold HOME button + Volume Down + then POWER button, Your phone should go into download mode.
Connect you phone to the PC using your USB cable, (odin should highlight a yellow square to signal you that your phone has been detected)
Put all the file you downloaded into thier rightful place and then flash.
I have just jumbled it up to give you a general direction, there should be more detailed infor on this site, keep looking and good luck
Tar file
thanks alot guys..
I've downloaded the ODIN and now i've the PIT file but where can i get the TAR file for my i9001?
take a look at samfirmware.com , there you can get the stock roms you want
stock firmware
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
search this forum and you find tens of tar files
1. Watch this Video w w w.youtube.com/watch?v=JmvCpR45LKA
2. Just register here w w w.sammobile.com/firmware/ when done click firmware and download what you need!
alzaq said:
search this forum and you find tens of tar files
Click to expand...
Click to collapse
As it was already mentioned go to samfirware.com and look for a stock rom espeacially for your region.
If you dont know wich to use, try to google the different country codes.
Further you should download odin 4.43 (u must use 4.43) and flash it back to the stock.
Like if it helped u unbrick ur phone
---------- Post added at 09:39 AM ---------- Previous post was at 09:34 AM ----------
ShahirHabib said:
how can i know the stock firmware on my phone? it doesnot start up so i can't get into the settings or something? and i'm sry but i don't get what does the region do with the firmware?
I'm so sorry but i'm really a very new android user
Thank you so much
Click to expand...
Click to collapse
You only have to know that ur owning a I9001
Go to samefirware.com and check the regional code
Download Odin 4.43 ( u must!!!!! use 4.43 otherwise it´ll freeze while processing)
plug in ur usb cable and wait while odin checks ur phone
flash ur phone back to stock
(if u dont know how to use odin read a tut. or write a mail to me im an expert =))
Best place to look is xda wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
You need odin and ariesve.ops
And some stock ROM.
hi i have a Samsung Tab P1000 and now its not powering on after i forced to switch off from downloading mode,because I'm trying to update from Froyo 2.2 to gingerbread 2.3.3 but after following the instruction from opening the odin, putting the pit file and PDA file and i click the start its only showing the setupconnection.......please help me.....thank you
did you try to charge it? If not do that and flash again.
yes....i tried to put in charge and it showing like this in the photo but if i remove from tha charger i cannot powering on and the icon will disappear.....
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Samsung gtp 1000
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
hi guy i ve the same problem, pls i just need to know if is an hard brick or just a soft.
I ve read many trhead on forum and i ve seen that if is hard brick i must use resurrection program but i cant find no link.
pls some one can post me? tnx
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
That diagram you had is the same thing as the download mode. So treat it as such and flash your rom and kernel normally and it should work. I had the same problem before. To be sure, tried the following thread. Go to the 3rd post in this thread and follow the installation instruction. It will work. http://forum.xda-developers.com/showthread.php?t=1382055
I get that every now and then too. I reinstall the drivers (included with Kies), and reboot the computer. After that it will work.
Froyo to Gingerbread -- Please be extra careful when flashing
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
Does ODIN still recognize your Tab? If you are upgrading from froyo to gingerbread, you may need to load new PIT file as well as new dbdata.rfs.
If ODIN still recognize your Tab, try to download your choice of firmware again with PIT file included. I'll attach a working PIT for you.
Note: Please extract the attached file to get the .PIT file and put it on PIT field on ODIN along with your choice of firmware you are flashing.
Once you are done and reboot, mostlikely you'll be in a boot-loop stuck at SAMSUNG screen. Now reboot to download mode again, then flash the DBDATA.rfs.tar I attached on the following post in PDA field on ODIN:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
i dont have the icon
wakak make sure you got the proper Samsung driver installed!
hi guys i have galaxy s and now i am on daky ics rom 4.04..
Can you please tell me the exacts steps on how can i go back to a stock gingerbread
because i want to sell my galaxy s to upgrade to s2..
Thanks..
vangelis89 said:
hi guys i have galaxy s and now i am on daky ics rom 4.04..
Can you please tell me the exacts steps on how can i go back to a stock gingerbread
because i want to sell my galaxy s to upgrade to s2..
Thanks..
Click to expand...
Click to collapse
Flash a downgrade ROM or GB rescue kit from My Android solutions, link below using Odin
Signup at http://samfirmware.com/, type "i9000" in the search field, choose the newest ROM released for you country/carrier, download it, flash it...
if u get the files, click here and download Odin v1.85 !
*Make sure Kies is not opened (Task manager > close anything named "Kies") / Battery is more than 80% / don't disconnect until the process is finished !
Open Odin, place the files like this: PDA (choose Code...) / PHONE (Modem...) / CSC (Phone...) and if there's a .PIT file you will see it (it's something like 512.pit). Then get the phone in Download Mode: Vol. Down + Home + Power, connect to pc and wait until appears in Odin. If nothing appears, you will need the Drivers. If appears, make sure repartition is unticked, and others two are ticked. Press START and don't disconnect until the phone restarts.
Done.
P.S.: That worked for me
xViBeR said:
if u get the files, click here and download Odin v1.85 !
*Make sure Kies is not opened (Task manager > close anything named "Kies") / Battery is more than 80% / don't disconnect until the process is finished !
Open Odin, place the files like this: PDA (choose Code...) / PHONE (Modem...) / CSC (Phone...) and if there's a .PIT file you will see it (it's something like 512.pit). Then get the phone in Download Mode: Vol. Down + Home + Power, connect to pc and wait until appears in Odin. If nothing appears, you will need the Drivers. If appears, make sure repartition is unticked, and others two are ticked. Press START and don't disconnect until the phone restarts.
Done.
P.S.: That worked for me
Click to expand...
Click to collapse
It is 4 days old thread,, I think he have already done it
xsenman said:
Flash a downgrade ROM or GB rescue kit from My Android solutions, link below using Odin
Click to expand...
Click to collapse
If want to flash from ICS to GB just need to flash ROM is enough (my device is I9001)?
mizuki_kai said:
If want to flash from ICS to GB just need to flash ROM is enough (my device is I9001)?
Click to expand...
Click to collapse
Depends on which ROM did you put onto the device. I recall if you're trying to go back from CM9 you're going to have to do the 3 files combo via ODIN.
xbesiegerx said:
Depends on which ROM did you put onto the device. I recall if you're trying to go back from CM9 you're going to have to do the 3 files combo via ODIN.
Click to expand...
Click to collapse
Yes. I saw most ICS is from CM9. What are the three files needed?