Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.
wic android version of gingerbread do you have on your phone..
sorry for asking again...
CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk
CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--
even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??
Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep
can you suggest any app for checking it??
Related
My dear friends i dont have any knowledge about kernel ... today i installed swiftkernel with cyanogen mod 7 ... if i overclock the phone to 1.2 ghz wont it damage the phone please do reply me .....
gomzy27 said:
My dear friends i dont have any knowledge about kernel ... today i installed swiftkernel with cyanogen mod 7 ... if i overclock the phone to 1.2 ghz wont it damage the phone please do reply me .....
Click to expand...
Click to collapse
Hi, the overclocking in general reduces life span of the cpu.
http://www.pcguide.com/opt/oc/risksRisksCPU-c.html
from my personal experience on this phone its quite safe to o.c to 1.4Ghz.
just mind the temperatures.
i installed swiftkernel .. it can be overclocked to 1.2 ghz .. will this be safe and can you kindly suggest me with the best rom and kernel .... may be the one that you are using .. once again thank you very much for replying to my query!!!!
Personally I love cyanogen mod, I'm using nightly build 200 and its awesome. Naturally you should get the newest one.
Vorkkernal is best for cyanogen and miui roms.
You will not break your phone overclocking. on very very hot days maybe go 1ghz to be safe.
Sent from my Optimus 2X using Tapatalk
Hi again
i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/showthread.php?t=1328656
the reason for de-odexed system is simply because it lets you use the kitchen for further customizations, also the version by paul is pre-rooted. which will make you're life easy.
the reason is simple. everything works fine atm in the stock rom (yeh people always complain..... so dont flame me for sticking to the stock, but for me it works excellent)
cyno is great as well, also topo and the rest , the ppl here are doing a magnificent work but you need to remember that all of this is work in progress; therefore i suggest you will use the stock rom for the start.
i.e. 1 week or so
and see if it fits well with you're requirements. if you don't have any issues than that's ure solution if u got issues with stock drop a msg here with the problem description and we can see what can we do.
hope i helped.
is it the same way as we flash other rom???? i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/show....php?t=132865
gomzy27 said:
is it the same way as we flash other rom???? i would suggest stock version v20L de-odexed by Paul ,
http://forum.xda-developers.com/show....php?t=132865
Click to expand...
Click to collapse
ure link is broken this is the right one.
http://forum.xda-developers.com/showthread.php?t=1328656
and yes u can use CWM to flash it.
no problem.
Thank a lot bro!!!! Hope to get more information from you!!
gomzy27 said:
Thank a lot bro!!!! Hope to get more information from you!!
Click to expand...
Click to collapse
with pleasure, that's why we are all here
after flashing it its looping i can only see the lg logo again and again??
did you wipe the cache and data?
did u download this file?
http://www.filesonic.com/file/2862194275/v20l-stock-rooted-deodex.zip
did u do a full wipe?
please explain what you have done and whats going on
the procedure is simple.
download the file to the SD
boot to CWM, wipe data / cache and dalvik cache , and then apply the zip.
the package is ext3 i assume you come from stock therefor there should be no issue.
let me know.
Yes i did it !!
should i do this If so, just flash with CWM back to ext3 and wipe cache with CWM.??
gomzy27 said:
should i do this If so, just flash with CWM back to ext3 and wipe cache with CWM.??
Click to expand...
Click to collapse
correctisimo
i had cyanogen mod 7 installed ....
gomzy27 said:
i had cyanogen mod 7 installed ....
Click to expand...
Click to collapse
u must wipe data 1st before flash!!! the rom is totally different.
i have smart flash tool but i have v10c not v 10e baseband 750 ...
gomzy27 said:
i have smart flash tool but i have v10c not v 10e baseband 750 ...
Click to expand...
Click to collapse
it dosent matter,
if u boot to CWM
and delete (wipe, and cache )as i mentioned before and flash it will be o.k
Finished installing what should i do next??
gomzy27 said:
Finished installing what should i do next??
Click to expand...
Click to collapse
Enjoy the phone? What is the problem or situation ?
Sent from my LG-P990 using XDA App
i need fast rom for my galaxy s plus
and a ics theme for the rom
please
thx =]
Check out BroodROM RC2, already comes with ICS theme.
and i want a ticket to Hawaii and hopefully a few liters of ICS to enjoy under the hot sun
tomi555 said:
Check out BroodROM RC2, already comes with ICS theme.
Click to expand...
Click to collapse
I'm new so
will it work on my phone?
my frimware version is 2.3.3
U cud have put this in an existing thread.Dont cause unessecary pollution!
SaSori495 said:
I'm new so
will it work on my phone?
my frimware version is 2.3.3
Click to expand...
Click to collapse
Its for all rom...but please root first
SaSori495 said:
i need fast rom for my galaxy s plus
and a ics theme for the rom
please
thx =]
Click to expand...
Click to collapse
U have to read hot forum if u want sgs+ fast.. 1st u must to root ur phone it is basic..
Sent from my GT-I9001 using xda premium
just boot into download mode and flash a custom kernel with odin
Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda
abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM
its working .....
----deleted----
the file has been deleted, can u re-upload it..
thanks
[ROM]
----deleted----
Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot
----deleted----
aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast
aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards
Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??
tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app
i just downloaded " lemmings" rom , he says its a full rom but there is one zip file containg boot.img and other folder a cwm rom , and i wanted to flash it with lg smart flashing tool because i cant root my lg ,, is there any way to flash it with lg smart flashing tool ??
No
Sent from my Phone with ultrasound
so what custom rom can i download and flash using smart flashing tool ??
i just need performance and battery :fingers-crossed:
Download a rooted stock rom.
Sent from my Phone with ultrasound
As RomWiz said your only option is to flash a stock rom(v20s is the most stable and fluid).If you want custom roms like Zeus , Marvel , ICS etc you must root your phone :good:
well thats it , flashed a rooted v20o and installed zeus v7 rom ,, thanks alot guys ,, oh by the way whats the difference between v20x and v20c and all of these ,, i know u can jump from one to another but what they meant for
They are originally different firmwares for different countries, some vary in bug fixed, that's why people recomend the v20s, it's the lastest
ErnuB said:
They are originally different firmwares for different countries, some vary in bug fixed, that's why people recomend the v20s, it's the lastest
Click to expand...
Click to collapse
mmmm .. thanks alot
rrgrrg said:
mmmm .. thanks alot
Click to expand...
Click to collapse
No need to thank, just push the thanks button
Sent from my LG-P970 using xda app-developers app
Can any1 help me with gb 2.3 stock rom which i can flash through cwm recovery?
I found one link on xda with 640mb size which can be flashed via smartfllash.
I need cwm file can any1 help me?
hirentherock555 said:
Can any1 help me with gb 2.3 stock rom which i can flash through cwm recovery?
I found one link on xda with 640mb size which can be flashed via smartfllash.
I need cwm file can any1 help me?
Click to expand...
Click to collapse
Something like this: http://forum.xda-developers.com/showthread.php?t=1617458
BR
Mike
hirentherock555 said:
Can any1 help me with gb 2.3 stock rom which i can flash through cwm recovery?
I found one link on xda with 640mb size which can be flashed via smartfllash.
I need cwm file can any1 help me?
Click to expand...
Click to collapse
Search for the cwm flash able ROM by flix or Homero......they are one of the best stock...pure stock based ROM.
O2X with Magical ROM and supersonic kernels from my buddies
Thnx for the link.needed ti kniw which rom wud be comoatible with my phone im from india.
The link is for v20q rom i wonder if that rim will be compatible with my phb?
Sent from my Optimus 2X using xda app-developers app
hirentherock555 said:
Thnx for the link.needed ti kniw which rom wud be comoatible with my phone im from india.
The link is for v20q rom i wonder if that rim will be compatible with my phb?
Sent from my Optimus 2X using xda app-developers app
Click to expand...
Click to collapse
it works perfectly....i am using V20C russian BB.Use DM 1.5 ROM which is stock based...presently on that....
you will not regret.
LOOK HERE
thanx again!
needed to know 1 more thing.
If i install this v20q rom in my o2x, shall i be able to use lg tool for update the firmware when ics will be launched?
Im on cm7 right now and when i connect lg tool it recognized the phone and shows an update(2.3 rom) available but it can not connect my phone thenafter.
So just wondering if i will be able to use lg update tool again ever???
hirentherock555 said:
thanx again!
needed to know 1 more thing.
If i install this v20q rom in my o2x, shall i be able to use lg tool for update the firmware when ics will be launched?
Im on cm7 right now and when i connect lg tool it recognized the phone and shows an update(2.3 rom) available but it can not connect my phone thenafter.
So just wondering if i will be able to use lg update tool again ever???
Click to expand...
Click to collapse
If you use this ROM V20q, you will have to try, if the update tool works. I find those LG tools are working randomly.
If you cannot update and want stock ICS on your phone, restore with Paul O'briens Smartflash, then you erase all traces of rooting your phone!
Cheers
Mike
On the other hand, will the stock ICS rom be as good as something like the hybrid Temasek rom anyway.
If we had the drivers for the video chip (and HDMI?) it would be perfect. As it is it's still better than stock in every other way.
Sent from my Optimus 2X using xda app-developers app
i seriously think ics wud be better than the customs...atleast they will be bugfree and as u know stocks roms r always better user friendly then the customs.
Im using temasek rom and symbiosis kernel at present.Will be back to stock gb in a few days