I can continue the project if i get proper feedback from you
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work for this patch
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* VIBRANT patch:- http://db.tt/j3ZIdudZ (12mb)
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q.:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for vibrant
Click to expand...
Click to collapse
Q.:- can I flash another vibrant ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or I897
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
just in case
Jumped quick on that one!
beta tester requesting you to try this patch please do that
is this just for I9000 roms or can we use others? is so which ones?
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
Well technically vibrant can flash i9000 roms with some minor issues like key mapping, sound path and gps.
This patch seems to take care of it (in a convenient way) and since ICS kernels seem to play nice it should work for all ICS roms.
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
actually almost all variants but i am not sure, you can try every variants rom and write it here that working or not, so I can update the op with some info
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Lochman79 said:
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
can you paste the link and what you flash first
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Lochman79 said:
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Did it just say like Installation Aborted in the Recovery? Or what else happened?
Did you make sure its not a bad download.
Get the .zip on PC and open it with winRAR, if its corrupted/bad download it'll give you errors, if it says nothing, its good and the patch probably needs working on.
Thats really weird too, it should've just flashed right on and even if the patch didn't work, it should've booted up and the capac. buttons would've been flipped etc. no signal (kernel) those would've been issues that are known.
This is amazing documentation.
Sent from my SGH-T989 using xda premium
I can't check the download as I have already deleted it, but I did check that it was a full download. Usually if it is a bad download, it will not be the correct mb size. And I forget exactly what it said when it failed...sorry. Has anyone else tried?
Sent from my SGH-T959 using XDA
sorry but it is not the fault of patch if the rom is not flashing
the patch will just install a working kernel and keylayout files and some minor tid-bits
did you install the rom with twrp kernel which is in the patch and also patch should be flashed again after flashing the rom
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Lochman79 said:
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Fine! I'll do it!
Haha but results may come later today.
Going to test on Infinitum 2.2
I'll update as soon as it boots up (hopefully).
Edit:
I got a Status 7 error
Seems like you can't flash something I9000 on a T959 recovery?
Sent from my SGH-T959 using xda premium
Related
I have successfully ported ClockworkMod for Galaxy Ace.
Almost everything is working, including flashing boot and recovery images and full backup and restore.
TO-DO List:
Build flashable zip for Froyo.
Fix power-off (as it does a full power off, until you keep pressed power button, then it gets back to recovery).
Try to make a unified version for Froyo and Gingerbread basebands.
Get official support (already notified Koush).
Changelog:
Alpha
Initial release
Beta
Custom kernel with ext4 support (for Froyo and Gingerbread versions).
USB Mass Storage Mode fixed (need's testing on Gingerbread).
All Ace versions should work (using proper build).
Gamma
Fixed reboot out of recovery.
Reverted to 3.x version of CWM, as 4.x is being actively developed (breaking things).
Flashing method:
Flashable zips (currently only for Gingerbread):
Flash attached ClockworkMod-ginger-gamma-signed.zip from any recovery (stock or CWM).
ODIN (alternative method, currently only method for Froyo):
Flash attached recovery_gamma_[your version].tar from ODIN. Put Cooper.ods in proper field, and recovery in PDA field. Leave other fields blank and ignore both errors.
Please port it to the latest 2.3.4 and the european froyo version.
Thanks
Sent from my GT-S5830 using XDA App
manju991 said:
Please port it to the latest 2.3.4 and the european froyo version.
Click to expand...
Click to collapse
Already in my TO-DO list.
Cool... Thanks mate..
Sent from my GT-S5830 using XDA App
you have to fixing framebuffer issue?
Sent from my ViewPad7 using XDA App
digkong said:
Dude why don't u work with the other two developer working on CWM...the work will be lot faster and lot more stable..
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
+1.... Instead of working separately and trying to port CWM, if you, dee000000 and PabloPL collaborate then the work would complete faster and due to the combined effort i am sure that it would be better and also save time and effort of all 3 of you.
ilarrain said:
I have successfully ported ClockworkMod for the american version of Galaxy Ace, running Froyo build of Samsung stock firmware.
Almost everything is working, including flashing boot and recovery images and full backup and restore.
Functions not working:
Formatting partitions.
Reboot recovery (you'll probably end in a boot loop, booting recovery everytime, until you flash an stock recovery in ODIN).
Enabling USB-Mass-Storage mode
Changes pending:
Build for GT-S5830 (european Ace).
Add EXT4 support (custom kernel or module loading).
Build flashable zip.
Code cleanup.
Publish full sources.
Fix boot loop (should send recovery-done to the bootloader).
Tomorrow I will continue development.
Recovery image (for GT-S5830L) attached in a tar (you can flash in ODIN if you like).
Please consider buying me a beer with the donate button on the left side, under my name.
Click to expand...
Click to collapse
Hi, great work. Could you share fix for graphics bug? How did you tested nandroid backup of boot/recovery? (could you test it on my CMW?).
If you want, i can send you what changes i've made, so then we would have fully working recovery for Ace.
Strange, USB Mass Storage mode is working for me (in my recovery). Didn't had to do any changes to make it working.
Edit 1:
I've fixed reboot problem.
PabloPL said:
Hi, great work. Could you share fix for graphics bug? How did you tested nandroid backup of boot/recovery? (could you test it on my CMW?).
If you want, i can send you what changes i've made, so then we would have fully working recovery for Ace.
Strange, USB Mass Storage mode is working for me (in my recovery). Didn't had to do any changes to make it working.
Click to expand...
Click to collapse
also strange on framebuffer. my changes on graphics.c is working good for galaxy mini.
i see in the first post the clockworkmod background is not shown in ace.
Sent from my ViewPad7 using XDA App
tj_style said:
also strange on framebuffer. my changes on graphics.c is working good for galaxy mini.
i see in the first post the clockworkmod background is not shown in ace.
Sent from my ViewPad7 using XDA App
Click to expand...
Click to collapse
THE background is working OK. I've used your fix, but I had to force 24bpp mode.
I will share my sources when I arrive home later today.
PabloPL: great! As soon as I share my sources, we can collaborate to get it working for all ace version ASAP.
ilarrain said:
THE background is working OK. I've used your fix, but I had to force 24bpp mode.
I will share my sources when I arrive home later today.
PabloPL: great! As soon as I share my sources, we can collaborate to get it working for all ace version ASAP.
Click to expand...
Click to collapse
using my fix on github?
will be more progress if you collaborating too on porting recovery for our device.
backup & restore seems okay, but i've bricked my galaxy mini when flashing rom via update.zip. i think it's because write_raw_image("/tmp/boot.img", "boot"), command in update script.
are you have to testing flash update.zip on your recovery?
tj_style said:
using my fix on github?
will be more progress if you collaborating too on porting recovery for our device.
backup & restore seems okay, but i've bricked my galaxy mini when flashing rom via update.zip. i think it's because write_raw_image("/tmp/boot.img", "boot"), command in update script.
are you have to testing flash update.zip on your recovery?
Click to expand...
Click to collapse
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
ilarrain said:
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
Click to expand...
Click to collapse
okay, great..
we will discusing again tomorrow, I must sleep now.
btw, maybe better to converting rfs to ext4, for module, we can use from i9000 source.
also, better to merge your changes and PabloPL changes with ifdef, it will more easy when updating from cyanogenmod source.
you want to collaborate in my repo? i will add you and other collaborator to the project.
ilarrain said:
I've tested backup+restore. I've also tested "flash_image recovery recovery.img". Doing it from a zip shouldn't be so different.
Sharing my sources is on my original todo list since the beginning, I've just didn't have enough time.
Sources will be in http://github.com/ilarrain.
I think the fix for ace's bml flashing is already there.
Sent from my GT-S5830L using XDA App
Click to expand...
Click to collapse
Looked at your changes and they looks like the same as mine, so nandroid backup for boot/recovery should also work in my sources.
Now the only think is to fix reboot loop (i thought that i've fixed it - tested with fakeflash recovery, but after flashing it wouldn't worked:/). Will look at it tomorrow.
looks cool o tried it on my froyo with europe firm work great..
but like u just said once u go in recovery you will never go out
nice work.
10x
Full sources published, look first page.
izador said:
looks cool o tried it on my froyo with europe firm work great..
but like u just said once u go in recovery you will never go out
nice work.
10x
Click to expand...
Click to collapse
Great!!! So we need less versions to mantain: froyo and gingerbread, no matter the ace version.
i also create a backup for recovery.img using yours tar for froyo, if some one needs it
after he tried to flash the recovery and have bootloop.
http://17cb3171.yyv.co
*its only for froyo
izador said:
i also create a backup for recovery.img using yours tar for froyo, if some one needs it
after he tried to flash the recovery and have bootloop.
http://17cb3171.yyv.co
*its only for froyo
Click to expand...
Click to collapse
If you have bootlop in recovery, just reboot (while in adb shell)
Code:
reboot recovery_done
excited for this..
good work guys..
After extracting CF-Root's zImage, I have found inside killrecovery.sh:
Code:
..
rm /cache/recovery/command
rm /cache/update.zip
touch /tmp/.ignorebootmessage
..
I hope this information useful for developer.
Sent from my GT-S5830 using XDA App
if i create backup with yours CW can i use it ?
it will work ?
did some one try it ?
partition us working good.
i tried to crate partition with CW, work good.
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROMhighly recommended to charge your cell phone at least 90% to prevent failure during flashing process..
Working:
RIL (Phone & Data)
2D & 3D Acceleration
Audio
Camera *
GPS
Wifi
Wifi Tether
Bluetooth
USB Mount
SD Card
Compcache
CPU Set from CM Setting
Radio FM **
Not Working:
USB Tether (Working with 3rd party app on market)
* Camera: sometime have wrong orientation
** Use Spirit Radio FM App
Thank you for mikereidis, to supporting Spirit Radio FM App for our device
also Credit for for subspyke, I've kanged your libaudio source , Thank you..
Please See More Info:
Instalation Prochedure
Change Log
Source:
Code:
[url="https://github.com/teamhacksung/android_device_samsung_tass"]android_device_samsung_tass[/url]
Usefull Modules:
Code:
[ATTACH]659480._xfImport[/ATTACH]
[ATTACH]659481._xfImport[/ATTACH]
Place on [B]/system/lib/modules/[/B]
Download:
Code:
[URL="http://download.andro-id.net/index.php?dir=GT-S5570/Cyanogenmod/&file=update-cm-7.1.0-GalaxyMini-KANG-signed-09102011.zip"]update-cm-7.1.0-GalaxyMini-KANG-signed-09102011.zip[/URL]
MD5: [B]36ce12700f305f9a9a6fc63e5ebd6f74[/B]
DOWNLOAD CWM RECOVERY:
Code:
[ATTACH]654124._xfImport[/ATTACH]
Installation
Flash Clockworkod Recovery :
skip this step if you have clockworkmod installed on your phone
Download :View attachment tass-recovery-cwm.tar
Open S5570_Odin Multi Downloader v4.38.exe
Select TASS.Ops on OPS Section
Check One Package in Option
Select tass-recovery-cwm.tar on One Package Section
Press Start to start flashing
Flash Cyanogenmod 7 ROM :
Download and copy the latest CM7 ROM to SD Card
Reboot to Recovery Mode
Select install zip from sd card
Select choose zip from sd card
Select the new CM7 ROM
Select Yes - Install update
Wait till the Installation is finish
Select reboot system now
IT'S VERY RECOMMENDED TO WIPE YOUR DATA AFTER INSTALLATION
Change Log
Last:
Android 2.3.5 with latest Cyanogenmod 7
Fix Compcache insmoding problem
Enhance Audio gain
Radio FM Work
Add BFQ Scheduler
Add Smartass Governor
Add Interactive Governor
Update OMX Libs
Repair Bluetooth Mac Address
Revision Wifi config
Build GPS from source
070911:
using EXT4 on all partition
add support to adjust CPU freq in CM setting
add compcache module
optional cifs and tun module available
fix LDPI layout
update Libaudio, but still have problem with headset
fix bluetooth related problem
fix Wifi problem that mac address is always changed
First yeah!
gonna flash it right away,
ill let you know ASAP how it works, btw the OC works with CM7 yes?
because the other thread confused me
+1000000000000000000000000000
thanks TJ!
Second ! =D
Nice Work dude !
Is this the same version of CM7 that was in previous thread?
TheWhisp said:
Is this the same version of CM7 that was in previous thread?
Click to expand...
Click to collapse
no it's and update, check first post this thread
I'm waiting about the Changelog =)
TheWhisp said:
Is this the same version of CM7 that was in previous thread?
Click to expand...
Click to collapse
See the first Page..
livetek said:
I'm waiting about the Changelog =)
Click to expand...
Click to collapse
I will start the change log from this release
Thanks
Sent from my GT-S5570 using XDA Premium App
i've also released the Andro-ID v3.2:
http://forum.xda-developers.com/showthread.php?t=1107331
it's flashed but why you have deleted the boot animation?
livetek said:
it's flashed but why you have deleted the boot animation?
Click to expand...
Click to collapse
not deleted, but now i'm using opensource init instead crap samsung init.
Sent from my ViewPad7 using XDA App
Ah ok yes it's cool now and i see it worked but i've lost all my installed App =/
I need to do a Titanium restore.
Tj, in future your release Will be official cyano release?
The same question for CWR.
Sent from my GT-S5570 using XDA Premium App
denzel09 said:
Tj, in future your release Will be official cyano release?
The same question for CWR.
Sent from my GT-S5570 using XDA Premium App
Click to expand...
Click to collapse
We will see buddy
Sent from my ViewPad7 using XDA App
Cool, now i haven't got any problem with Wifi ! =)
But Tj, can i overclock over 600mhz with this update?
livetek said:
Cool, now i haven't got any problem with Wifi ! =)
But Tj, can i overclock over 600mhz with this update?
Click to expand...
Click to collapse
there is not available overclock for now, please give me time to fixing up the problem in system.
Sent from my ViewPad7 using XDA App
This is awesome!! Finally clockworkmod for Galaxy mini!! Just a couple of questions:
1.- I have GT-S5570L (Latin America version) do you know if it should also work in this phone? FYI: I'm running Froyo 2.2.1 I have tried 2.3.4 European Gingerbread from Samfirmware (only PDA) and got stuck at Samsung logo
2.- Does any of those two files (recovery and update.zip) mess or overwrite "amss" and/or csc.rfs files? Because if it doesn't touch them I think I can try to flash it.
3.- I have a one package .tar file (contents: amss, csc.rfs, recovery.img, boot.img, system.rfs) with my stock ROM which I have used as backup a few times now, will I be able to downgrade back to Froyo after flashing CM7? (In case it doesn't work).
I know it's a lot of questions and I don't expecto you to answer all, but at least a few... we Latin American users are left in the dark and neglected by samsung, independent developers like you are our only hope. I'll take a look at your source code and see if I can start working with it too, but I'm still a newbie.
Thanks!!
Ok
Doubts: for swap we will use a third partition? And App2SD darktremor now works ?
Sent from my GT-S5570 using XDA Premium App
This is my first rom and build
Test version, all I have changed is a few .apk files and replaced launcher
Based on latest stock rom, kernel XXLQ2
Flash via CWM
FLASH AT YOUR OWN RISK
welcome
SealsNavie said:
This is my first rom and build
Test version, all I have changed is a few .apk files and replaced launcher
Based on latest stock rom, kernel XXLQ2
Flash via CWM
http://www.filefactory.com/file/344hed6auk3r/n/SEALED_a_01.zip
FLASH AT YOUR OWN RISK
Click to expand...
Click to collapse
good job getting here. would be helpful for us folks if you could have some changelog as well as the contents of the ROM. like what you modified,modem used etc . thanks and good work
Don't download please as it doesn't work, just tested it on my phone.
I got the following error:
-- Installing: /sdcard/SEALED_a_01.zip
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer supported.
Amend script was depracated by Google in Android 1.5.
It was neccessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread
based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip package.
Installation aborted.
This is joke???
Sent from my GT-N7000 using xda premium
This really is a joke.
My note is dead, no joke...its not turning on at all now. I flashed my rom, then I flashed ParanoidAndroid rom and it flashed, I thought i'd try flashing my rom again and it failed then...I tried flashing ParanoidAndroid rom again and it came up with an error and it said (bad) in brackets, have I just bricked my note?
I'll post in general forum.
SealsNavie said:
My note is dead, no joke...its not turning on at all now. I flashed my rom, then I flashed ParanoidAndroid rom and it flashed, I thought i'd try flashing my rom again and it failed then...I tried flashing ParanoidAndroid rom again and it came up with an error and it said (bad) in brackets, have I just bricked my note?
Click to expand...
Click to collapse
Flash any stock firmware via pc odin and your Note will be ok.
In PC odin, the green bar is not showing when the cable is connected, I presume this has to show first?
Suggestion Only
Maybe you should removed the download link and change the title until you get things sorted out.
---------- Post added at 10:01 PM ---------- Previous post was at 09:59 PM ----------
SealsNavie said:
In PC odin, the green bar is not showing when the cable is connected, I presume this has to show first?
Click to expand...
Click to collapse
For going back to stock - check this thread
http://forum.xda-developers.com/showthread.php?t=1424997
glensta said:
Maybe you should removed the download link and change the title until you get things sorted out.
---------- Post added at 10:01 PM ---------- Previous post was at 09:59 PM ----------
For going back to stock - check this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
My screen is showing no signs of life.
hmmm i know that most of us want to cook their own rom and etc. But if you dont know well about developing better dont try because you can brick your and others phones ;D
I think moderators must close this thread!
Odin will show first yellow bar not green
Sent from my GT-N7000 using xda premium
Amend update scripts have not been used for ages, you need to switch to edify script otherwise the proverbial will hit the fan
Where did you get your update-script from?
thering1975 said:
Amend update scripts have not been used for ages, you need to switch to edify script otherwise the proverbial will hit the fan
Where did you get your update-script from?
Click to expand...
Click to collapse
I got the scripts from a guide found here: http://forum.xda-developers.com/showthread.php?t=1661770
SealsNavie said:
I got the scripts from a guide found here: http://forum.xda-developers.com/showthread.php?t=1661770
Click to expand...
Click to collapse
But it was a bit premature to release the ROM untested. Thankfully only you are bricked. Remove the link before an unsuspecting noob follows suit.
SealsNavie said:
I got the scripts from a guide found here: http://forum.xda-developers.com/showthread.php?t=1661770
Click to expand...
Click to collapse
Where did you get the update binary from the same thread
Sent from my GT-N7000 using xda premium
Well congrats on trying to cook your own rom. Sorry it worked out as such though. But as a few others stated, please don't ever throw the link up for a rom that has not been thoroughly tested. Some of the best developers we have find issues, and this could have led to some serious trouble as we LOVE new stuff lol. But seriously, keep working on it, you'll be a chef in no time
SealsNavie said:
My note is dead, no joke...its not turning on at all now. I flashed my rom, then I flashed ParanoidAndroid rom and it flashed, I thought i'd try flashing my rom again and it failed then...I tried flashing ParanoidAndroid rom again and it came up with an error and it said (bad) in brackets, have I just bricked my note?
I'll post in general forum.
Click to expand...
Click to collapse
First it might have caused it because you say its stock kernel and and I'm sure you didn't root the kernel and when you make roms do remember that the newer cwm's use edify and not ammend.Now If you need to learn something about development,you can PM me and will help and teach you whatever I know
if you use the kitchen blindly, then you have to end up with these kind of consequences only....if you deodexed doesnt mean you have developed the ROM....what you have done, is using the scripts created by the kitchen, which is no longer supported...you need to edit those or use someone else scripts to flash the ROM...
I'd like to bring you Hazard the best of both world speed and battery life. I have built this rom from ground up by myself, This is the first leaked rom that is JellyBean 4.1.2 which brings some of the galaxy note 2 features. i have decided to tweak it up a little bit to give it that extra bit of boost that it really needs. The improvements are amazing. But don't take my word for it try it yourself and tell me if you think it is a good rom or not. I am hoping to make more tweaks to the Ui in the future, As of now how ever it is a stock looking rom with tweaks. If you want to see an app added please tell me.
The lite version can be found here: http://forum.xda-developers.com/showpost.php?p=34544676&postcount=148
ROM INFO:
- Deodexed.
- Zipaligned.
- BusyBox.
- Cleaned up updater script.
- Supercharged Thanks to zeppelinrox.
- Battery tweaks
- Better WiFi and 3G signals
- Unlimited SMS Recipients.
- Large APN list thanks to Cyanogenmod team.
- GPS Fix.
- init.d support with a few tweaks.
- Build prop tweaks.
- Smoothness Tweaks.
- Speed tweaks.
- Acid sound mod thanks to r-ikfoot
- Modem XXELJ2.
- Full hardware rendering enabled.
- Added Multi CSC thanks to wanam.
- Siyah Kernel 1.7 latest. gokhanmoral
- Blue and black playstore 3.10.9 Thanks to Kryten2k35
- Call recording and no increasing ringtone.
- Removed a few apps.
- 4 Way reboot menu.
- Added Facebook and twitter.
- Added Pop up browser.
- Added Transparent Acuraweather Widget.
- Black notification bar and blue theme thanks to raubkatze.
- Added AdAway.
- Transparent multi view bar.
- Fully rooted.
- Resolved camera freeze issue.
It is split into parts so i can upload it to zippyshare. All you have to do is use 7zip to extract the CWM Flashable zip and then transfer it to your phone's memory and flash away...
How to install:
Fresh Install
Please make full wipe.
That is wipe data factory reset,
Wipe cache and Wipe dalvik cache.
After that simply install and have fun.
No wipe.
Simply download the rom.
Install it over your current
rom without any wipe.
You should be good to go.
I would recommend that you all install it fresh with full wipes for best experience.
Hazard V4.0 D/L:
Zippyshare:
http://www49.zippyshare.com/v/27993545/file.html
http://www49.zippyshare.com/v/1530801/file.html
http://www49.zippyshare.com/v/17175414/file.html
http://www49.zippyshare.com/v/11917867/file.html
MediaFire:
http://www.mediafire.com/?qc72eci9cd669ra
http://www.mediafire.com/?5asepdbay64yoc0
http://www.mediafire.com/?a6zn4dqiiwtasqu
http://www.mediafire.com/?mh6j1slfeg1amlc
MultiUpload:
http://www.multiupload.nl/GJYEC1D1AE
Rapidshare:
https://rapidshare.com/files/3961005021/HazardROM V4.0.zip
Default camera files for stock kernel + Stock Kernel if anyone wants to go completely stock..
Code:
[COLOR="Red"][B]Stock camera files:[/B][/COLOR]
[url]http://www.multiupload.nl/CM9DQRX5H1[/url]
[url]http://www26.zippyshare.com/v/8386274/file.html[/url]
[url]http://www.mediafire.com/?abak6jzwa28jyl4[/url]
[COLOR="red"][B]Stock Kernel with init.d support: [/B][/COLOR]
[url]http://www.multiupload.nl/X812QFR6B3[/url]
[url]http://www26.zippyshare.com/v/29921927/file.html[/url]
[url]http://www.mediafire.com/?bmaduras1t266tn[/url]
Credits.
Code:
[COLOR="DarkOrange"][B]Credit and thanks to:[/B][/COLOR]
[COLOR="orange"]raubkatze:[/COLOR] [url]http://forum.xda-developers.com/showthread.php?t=1995320[/url]
[COLOR="orange"]AndiP:[/COLOR] [url]http://forum.xda-developers.com/showthread.php?t=1797361[/url]
[COLOR="orange"]gokhanmoral:[/COLOR] [url]http://forum.xda-developers.com/showthread.php?t=1709686[/url]
[COLOR="orange"]bala_gamer:[/COLOR] [url]http://forum.xda-developers.com/showthread.php?t=1995697[/url]
[COLOR="Orange"]Wanam:[/COLOR] [url]http://forum.xda-developers.com/showthread.php?t=1705866[/url]
Code:
[CENTER]Donations credit:
Thank you OverKill[/CENTER]
wow you are very fast mate tnxs downloading now
Sent from my GT-I9300 using xda premium
Good work mate..
sent from here, there, somewhere!!
zoot1 said:
Good work mate..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Thanks man..
Great Rom. Thanks, man. One issue: BINARY SU NOT INSTALLED. So I cant open TITANIUM BACKUP. Any idea?
radiobicho said:
Great Rom. Thanks, man. One issue: BINARY SU NOT INSTALLED. So I cant open TITANIUM BACKUP. Any idea?
Click to expand...
Click to collapse
If it has either supersu or superuser app..open it and update the binary..it should work then..
sent from here, there, somewhere!!
zoot1 said:
If it has either supersu or superuser app..open it and update the binary..it should work then..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
I did a full wipe and now im flashing rom again. Lets wait......................................
radiobicho said:
I did a full wipe and now im flashing rom again. Lets wait......................................
Click to expand...
Click to collapse
Ahh i am sorry about that please flash this zip that chainfire has made it will fix it. http://download.chainfire.eu/282/SuperSU/CWM-SuperSU-v0.98.zip
Meemo23 said:
Ahh i am sorry about that please flash this zip that chainfire has made it will fix it. http://download.chainfire.eu/282/SuperSU/CWM-SuperSU-v0.98.zip
Click to expand...
Click to collapse
Yes. I reflashed rom but issue happened again. Now i will try this Chaifire fix...... se you.
Thank you very much for all your work.
GREAT!!!!!! Did FULL WIPE. Flash XXELK4 rom. Flash CWM-SuperSU-v0.98.zip. Now everything is working. Thanks, bro!!!
radiobicho said:
GREAT!!!!!! Did FULL WIPE. Flash XXELK4 rom. Flash CWM-SuperSU-v0.98.zip. Now everything is working. Thanks, bro!!!
Click to expand...
Click to collapse
Sorry you had to wipe your phone a few times i should of checked it before i rushed it. Anyway it is great that you did get it working enjoy.
thx bro i download to to test
Everything works great. Thanks again
Sent from my GT-I9300 using xda app-developers app
the note 2 camera is not included is it?and is it non-wipe? Thanks
hii..i have downloaded all four parts ..but i am unable to open it...any help would be appreciated...
Regards...
skivnit said:
the note 2 camera is not included is it?and is it non-wipe? Thanks
Click to expand...
Click to collapse
It looks like the Note to camera but it is missing slow motion video capture. And it is a new base i mean you can try to flash it without wipe and tell us if it works. But i would recommend a full wipe.
angelnaina said:
hii..i have downloaded all four parts ..but i am unable to open it...any help would be appreciated...
Regards...
Click to expand...
Click to collapse
You need 7zip to extract the four parts then you get the flashable zip mate.
hii.i have installed 7z .but files are not opening.do i need to change its format..
because its for format is 7z.001 ...
Sent from my GT-I9300 using xda premium
angelnaina said:
hii.i have installed 7z .but files are not opening.do i need to change its format..
because its for format is 7z.001 ...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Once you installed 7zip right click on the first file and then a whole 7zip menu should appear then you are able to click extract here.
i did exactly same but dnt know why having error that cnt open file
Sent from my GT-I9300 using xda premium
NOT OFFICIAL JB FOR 8013
UK release of Jelly Bean for the 8000 XXBLK2
working on 8013
This is an offshoot of the thread I started to get the jelly bean updates working on the 8013, here http://forum.xda-developers.com/showthread.php?t=1982821
Pretty much just fixes the null icon for the signal, tweaks to the build.prop, ad some other stuff to make it a little better for the8013
This is mostly stock, aside from:
Root
de-odexed
Busybox
zipaligned
init.d support
4 way reboot
removed the null signal icons for 8013
Instructions:
Use CWM
Make a backup first
Wipe your stuff
wipe data/factory reset
wipe cache partition
mounts and storage/ format /data
mounts and storage/ format /system
mounts and storage/ format /cache
advanced/ wipe dalvik cache
Repeat a couple times for good measure
In order to prevent random reboots, the 8013 rom has the default governor set to ondemand
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Downloads
Stock 8000 deodexed
http://www.mediafire.com/file/6yl9ve4wnx9l1l7/8000_UK_JB_v2_Stock.zip
MD5: DDDD0CB81992FFD0CD652F4AA1DD3DC2
Stock 8013
http://www.mediafire.com/file/lqhc0132q0ubgax/8013_UK_JB_v2_Stock.zip
MD5: 4EA6F6EDCBD7C79694BF6208A095ED2F
Custom 8013
http://www.mediafire.com/file/f5mc9vuhboj6wt4/8013_custom_UK_JB_V3.zip Updated 12/7/12
MD5: B91FA701460ECFA7CEAB2AE23BDC1CD9
Custom 8013 has:
It is slightly debloated (like yahoo and stuff)
1% circle battery mod
some build.prop tweaks
some init.d stuff
lightly themed
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here is the best way in my opinion, to improve performance http://forum.xda-developers.com/showthread.php?t=1908269
Bugs
Stock browser has issues downloading stuff
USB OTG
In the works:
Better and smoother
people, do with this what you please, the more mods posted and shared the better!
As always, Flash at your own risk
Thanks to everyone in the community for helping with stuff and dsixda's kitchen!
UOT kitchen http://uot.dakra.lt/kitchen/
darkman_rs for unknowingly assisting with the updater-script
Screenshots
Custom 8013:
https://www.dropbox.com/s/pu6y323awlpei98/2012-12-05 13.05.28.png
https://www.dropbox.com/s/bsyi0ecvtj7685j/2012-12-05 13.20.21.png
Add ons
You should make a backup before flashing any of these just in case something got corrupt or Murphy is hanging around
These are flashable zips:
Themes:
Theme 1 for the 80xx
http://www.mediafire.com/?8k9cvlv1qfwdytj
screenshots:
http://www.mediafire.com/view/?zbv027vrel1hidm ... http://www.mediafire.com/view/?c14af2um464i4e5
Theme 2 for the 80xx
http://www.mediafire.com/?c1jw9xmrzd3jdtn
screenshots:
http://www.mediafire.com/view/?lh4c1sdllqii2nr ... http://www.mediafire.com/view/?uqc95eemxk65392
1% circle battery mod for the 8000
http://www.mediafire.com/download.php?ouui5ku1st6b125
Other stuff
Build.prop changes for 8010
http://www.mediafire.com/?u4cjv23t71bdrrt
If you're having issues with root, flash this
https://www.dropbox.com/s/0mg8dgl2pjr78ug/CWM-SuperSU-v0.94.zip
from here http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
a wish
I wish you made the n8000 also with 1% battery increments,
How do you do this mod anyway, any link for instructions
Thanks for the effort anyway
drhassan said:
I wish you made the n8000 also with 1% battery increments,
How do you do this mod anyway, any link for instructions
Thanks for the effort anyway
Click to expand...
Click to collapse
Yep, UOT kitchen
http://uot.dakra.lt/kitchen/
Great for the little things like this.
Give this a shot, uploaded to mediafire and it should work
http://www.mediafire.com/?ouui5ku1st6b125
Thanks!
what is different with germany rom?
Sent from my GT-I9100 using xda premium
JISIK said:
Thanks!
what is different with germany rom?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I haven't noticed anything yet, but it is a newer build
Absolutely fabulous! Thank you!
md5
8013 Below is a slightly debloated (like yahoo and stuff) with 1% circle battery mod:
This is what I am using http://www.mediafire.com/download.php?1ai61c4pk0dx16j
Can you post the MD5 checksum for this ROM? Thanks in advance
naomile said:
8013 below is a slightly debloated (like yahoo and stuff) with 1% circle battery mod:
this is what i am using http://www.mediafire.com/download.php?1ai61c4pk0dx16j
can you post the md5 checksum for this rom? Thanks in advance
Click to expand...
Click to collapse
fa32dd8ed6380d434ae38b8bdb8acbb4
Smaw! First off, thanks! But I flashed your rom and I can't obtain root access. Checked SuperSU and it says that the binaries aren't installed. Could you possibly upload a flashable zip patch to get root back? Thanks!
EDIT: Actually, it says the SU binaries are installed but SuperSU cannot install it.
DroidOnRoids said:
Smaw! First off, thanks! But I flashed your rom and I can't obtain root access. Checked SuperSU and it says that the binaries aren't installed. Could you possibly upload a flashable zip patch to get root back? Thanks!
EDIT: Actually, it says the SU binaries are installed but SuperSU cannot install it.
Click to expand...
Click to collapse
Thanks for bringing that up, I thought I fixed it. If you have tried rebooting and that didn't fix it then use this method
http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
here is the zip
https://www.dropbox.com/s/0mg8dgl2pjr78ug/CWM-SuperSU-v0.94.zip
just flash and it should get it working right
I am going to have to take a look into it
smaw51 said:
Thanks for bringing that up, I thought I fixed it. If you have tried rebooting and that didn't fix it then use this method
http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
here is the zip
https://www.dropbox.com/s/0mg8dgl2pjr78ug/CWM-SuperSU-v0.94.zip
just flash and it should get it working right
I am going to have to take a look into it
Click to expand...
Click to collapse
Thanks for the fix, but I went ahead and fixed it myself by using Chainfires Odin Autoroot method and that fixed it too!
DroidOnRoids said:
Thanks for the fix, but I went ahead and fixed it myself by using Chainfires Odin Autoroot method and that fixed it too!
Click to expand...
Click to collapse
Cool beans, which rom was it?
smaw51 said:
Cool beans, which rom was it?
Click to expand...
Click to collapse
N8013 stock.
DroidOnRoids said:
N8013 stock.
Click to expand...
Click to collapse
Yep, found the issue, I think I fixed it on the modded 8013 and thought I fixed it in the stock 8013, turns out I didn't, I will be uploading the fixed stock as soon as I am done testing it.
Edit:
uploaded fixed, and tested version of stock 8013
Do you know if usb otg bug is fixed in this version.?
LNICK said:
Do you know if usb otg bug is fixed in this version.?
Click to expand...
Click to collapse
I don't have one to test with :/
LNICK said:
Do you know if usb otg bug is fixed in this version.?
Click to expand...
Click to collapse
What is this? I am not able to use any 30pin usb connectors for flash drives or keyboard/mouse, etc. Is that what you are talking about?
Updated 2nd post with a little theme
http://www.mediafire.com/?8k9cvlv1qfwdytj
Smaw, for some reason S Note force closes. I DL'd your rom 3 times and clean flashed them 3 times and get a same result. Could you look into it please? I need S Note for my lecture classes lol Thanks!