Cant boot into usb host mode - HD7 Q&A, Help & Troubleshooting

I cant enter usb host mode
I m currently trying to lower my bootloader by using the goldcard method
When i turn off my phone and hold the power, camera and vol down.
My phone doesnt boot in to usb host mode but it shows a picture of a phone connecting to a pc
Please help me guys
Thanks in advence.

you need to hold the camera and volume down button and the press the power on button.....it should start with the tri color screen and a second later you enter USB host mode....until u enter dont leave any button....
---------- Post added at 10:51 PM ---------- Previous post was at 10:47 PM ----------
read the comments in the goldcard thread....that might help you in sorting out the problem

Related

Device won't turn on

I have a big problem
After unlocking my device and flashing my device with "KA02.2 Xperia Z Revolution" everything seemed running smooth for on day i turned my phone on and off writing sms, ... then when i tried to start up in fastboot mode and pluged into the pc to flash doomlords kernel it suddenly was dead. No LED light and the phone won't even start up (to be precisely i dont no if its even turned on).
Could it be that i am just stuck in fastboot mode and just let the device run out of battery? or what could it be?
Thanks for any response in advance!
Allhopegone said:
I have a big problem
After unlocking my device and flashing my device with "KA02.2 Xperia Z Revolution" everything seemed running smooth for on day i turned my phone on and off writing sms, ... then when i tried to start up in fastboot mode and pluged into the pc to flash doomlords kernel it suddenly was dead. No LED light and the phone won't even start up (to be precisely i dont no if its even turned on).
Could it be that i am just stuck in fastboot mode and just let the device run out of battery? or what could it be?
Thanks for any response in advance!
Click to expand...
Click to collapse
it might be Soft-brick / Hard-brick
if ur hardware doesn have problem so u should setting up ur booloader or sth said !epr RAM! if i remember correctly
but i think take it to a professional service :good:
---------- Post added at 06:25 PM ---------- Previous post was at 06:17 PM ----------
pls explain it here and vote;
http://forum.xda-developers.com/showthread.php?t=2199789
thanks
I do not understand what you mean by:
"Could it be that i am just stuck in fastboot mode and just let the device run out of battery? or what could it be?"
By reading this I get the idea the phone is now no longer turning off?
If so, try hold the VOL UP + Power button untill it turns off.
If that is not the problem, hold VOL UP and plug in the USB in the phone. (Do not press power)
Does the device enter fastboot mode now?
If so, does your PC recognize the device when connected in fastboot mode?
Kind regards, Stefan.

BootLoop and now Nothing

Hay guys
Heres the deal
I used flashtool 0.9.13.0 and flashed the UK .244 C6603 on my Xperia Z
Then using the method in Excelsus_Z_V5.5.7 to change the kernel to the .423
After words I used the Root tool DoomLord Ver18 to root the device and then the TWRP till now all is GOOD
When I flashed the ROM the Recovery gave an error mid way through the setup
So when I restarted the device I got stuck
Now I have the Sony logo all the time
I can't even go to flash mode to reFlash a stock TFT
Please Help.....
Fastbootmode? Volum up & plug in usb
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
Do you tryed to flash back to stock rom with flashtool or SUS?
gripfly said:
Fastbootmode? Volum up & plug in usb
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
Do you tryed to flash back to stock rom with flashtool or SUS?
Click to expand...
Click to collapse
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED
sshashlan said:
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED
Click to expand...
Click to collapse
vul up + power will restart your phone, keep it pressed both for more than 10 sec and it will shutdown your phone hardwarely! then you can go to flashmode, fastboot and etc.
sijav said:
vul up + power will restart your phone, keep it pressed both for more than 10 sec and it will shutdown your phone hardwarely! then you can go to flashmode, fastboot and etc.
Click to expand...
Click to collapse
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode
sshashlan said:
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode
Click to expand...
Click to collapse
I'm not sure if you doing this the right way,
1. you must hold down the vul down
2. and then connect the USB!
3. make sure your drivers are installed and your pc find your phone!
sijav said:
I'm not sure if you doing this the right way,
1. you must hold down the vul down
2. and then connect the USB!
3. make sure your drivers are installed and your pc find your phone!
Click to expand...
Click to collapse
Nop
I know how to do this
I tried to do it more than once by pressing the Vol Down for the flash mode and/or Vol UP for the fastboot mode
yet NOTHING ;(
sshashlan said:
I cant get into flash mode
it keeps rebooting
and at best I get a blank screen with a red LED
Click to expand...
Click to collapse
For fastboot mode you dont need flashmode..
Open flashtool
Klick on fastbootmode
Connect phone with holding volume up button
What happens now?
gripfly said:
For fastboot mode you dont need flashmode..
Open flashtool
Klick on fastbootmode
Connect phone with holding volume up button
What happens now?
Click to expand...
Click to collapse
I m getting the same thing with the red LED
on Flashtool LOG
04/047/2013 16:47:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/049/2013 16:49:32 - INFO - Device disconnected
04/049/2013 18:49:06 - INFO - Device connected with USB debugging off
04/049/2013 18:49:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/051/2013 18:51:22 - INFO - Device disconnected
it stays blank for some time and it comes back up with the Sony logo and back with the LOOP
sshashlan said:
NO nothing
the phone goes OFF but when I connect the USB the RED LED comes UP and NO Flash Mode
Click to expand...
Click to collapse
Only Off and no restart??
EDIT:
http://forum.xda-developers.com/showthread.php?t=2229250
give a look at this thread, If you need your phone quckly. Now I don't have more time for next hours.
gripfly said:
Only Off and no restart??
EDIT:
http://forum.xda-developers.com/showthread.php?t=2229250
Give a look at this thread, If you need your phone quickly. Now I don't have more time for next hours.
Click to expand...
Click to collapse
Man Thank you So Much
It appears I had a soft Break
but this link saved Me
All OF YOU
THANK YOU
sshashlan said:
Man Thank you So Much
It appears I had a soft Break
but this link saved Me
All OF YOU
THANK YOU
Click to expand...
Click to collapse
You're welcome

[Q] Windows 8.1 won't recognise my device in download mode

So I am currently in the process of trying to flash a recovery drive onto my samsung galaxy mini however whenever i connect my phone in download mode my computer says windows can not recognise the device however it recognises my device when in all other modes. I have tried re installing drivers factory and resetting my phone several times. Please help if you know how! Thanks
P.s. I have attached a picture of the message i am given.
So maybe you don't install driver phone yet , right ?
---------- Post added at 04:06 PM ---------- Previous post was at 04:05 PM ----------
Or should maybe try restart your computer to give all drivers read properly into your system computer .
thanks but didn't help
Thanks for the advice but it didn't work, p.s. what do you mean about not installing drivers yet, they are required
Also the problem is that my computer detects the phone but can't read it essentially

[Q] P7 refuses to go in fastboot?

Hello,
My P7 refuses to go in to fastboot mode with volume down + power button. Or is there an other combination? The only thing the phone does is going into safe mode..
Thanks in advance,
Cerveza said:
Hello,
My P7 refuses to go in to fastboot mode with volume down + power button. Or is there an other combination? The only thing the phone does is going into safe mode..
Thanks in advance,
Click to expand...
Click to collapse
Oh man, just plug in PC usb cable before rebooting into fastboot.
Sent from my HUAWEI P7-L10
Cerveza said:
Hello,
My P7 refuses to go in to fastboot mode with volume down + power button. Or is there an other combination? The only thing the phone does is going into safe mode..
Thanks in advance,
Click to expand...
Click to collapse
turn off your phone .. hold vol - down and connect usb ..
important
Ziolek67 said:
Oh man, just plug in PC usb cable before rebooting into fastboot.
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
HI
While i want enter to recovery mood <>>>appears on program hisuite not supported :crying::crying:
---------- Post added at 02:09 PM ---------- Previous post was at 02:07 PM ----------
Simona Simmy said:
turn off your phone .. hold vol - down and connect usb ..
Click to expand...
Click to collapse
HI
While i want enter to recovery mood <>>>appears on program hisuite not supported :crying::crying:

Huawei honor 3c - error with sp flashtool

Hi,
I've got a problem with my Honor 3c.
When I'm trying to connect it without battery to unbrick it in program Smart Phone Flash Tool it is only like on the screenshot. Phone vibrating every 5 seconds. I've got drivers. Maybe you know what to do?
Solution
Try with the battery inside. I had the same issue, inserting the battery solved the problem
1.Turn off phone and remive battery then disconnect all usb connections from phone
---------- Post added at 09:33 ---------- Previous post was at 09:33 ----------
2.Connect usb cable with phone without battery
---------- Post added at 09:34 ---------- Previous post was at 09:33 ----------
3. Press Download on sp flash tool then insert battery
Post outcone?
I passed this step, I am stuck with next step
Fixed it?
looks like problem with scatter file.

Categories

Resources