Related
First of all, HI to every one, this forum is excellent and u are doing excellent job.
I have one problem,yesturday my htc tytn Ii felt down from half meter and from that time my touch screen is not working . screen is working fine but touch no ...what can i do? to open a case and see if conector is maybe disconected or ? is there need buying new lcd screen?
You can try opening it up and disconnect/reconnect the touch digitizer ribbon cable, if that doesn't work buy a new touch screen digitizer. They're fairly cheap.
so correct me if i'm wrong,there are two parts on the display? lcd screen and that touch screen digitizer??and digitizer is on top?
Yes, there's the LCD screen, then on top the digitizer.
the digitizer costs about 15 bux on ebay, and the lcd with the digitizer costs about 50. my touchscreen stopped responding awhile back, so i had to replace it. word of advice though. the digitizer is kinda build into the lcd, and it is a huge pain (atleast 4 me) to replace it. i ended up cracking my screen doing it, and had to but the whole lcd.
so your suggesting to buy entire lcd screen with digitizer on it?
You can get the lcd+ digitizer from yallstore for 35$ http://www.yallstore.com/htc-tilt-tytn-ii-att-8925-lcd-touch-screen-replacementt56-p-874.html
Which is exactly what i ordered on thursday after my screen cracked.
Replacing JUST the digitizer is quite tricky, i don't know if any of you guys have done it (i have) and it was pretty darn tricky if youve never taken fiddley things apart beware! the digitizer glass is glued on (around the edges) to the LCD, a sharp knife around the edge (the glass WILL crack) and a careful replacedment (i had to solder the ribbon cable on) should help there is a guide somewhere where someone has documented their attempt!
so can i be sure that my problem will be solved with new lcd screen?
please guys i need anwsers fast
zolmajstor said:
so can i be sure that my problem will be solved with new lcd screen?
Click to expand...
Click to collapse
Can you be certain this will fix it? No. It's about 99% likely, however. I don't know about you, but I pay alot more than $35/month just for my service. I haven't done the screen on my Kaiser, but I did on my Excalibur, which my son then inherited. To be honest, the Kaiser looks easier from what I've read.
it most probably isn't a software problem, so yes buy a new LCD+digitizer and replace both.
I dont know how it cracked - i just put it on desk, and when i returned, it cracked.
The screen is cracked in the upper part, and it's not working at all.
Do I need just a new screen or a screen and a digitizer?
Also, LCD+Digitizer sets on eBay, are they LCDs or AMOLEDs?
I bought SAMSUNG Galaxy S i9000 LCD Digitizer Screen + Housing so all i had to save was back housing back case and mother board. Changed it alli n less then 15 minutes. cost me like 80 bucks.
Alucardi said:
I bought SAMSUNG Galaxy S i9000 LCD Digitizer Screen + Housing so all i had to save was back housing back case and mother board. Changed it alli n less then 15 minutes. cost me like 80 bucks.
Click to expand...
Click to collapse
good choise...
i was try change screen its very hard... its was hard glued bottom side and breaked...
and i bought "SAMSUNG Galaxy S i9000 LCD Digitizer Screen + Housing" like you and very easy changed.
I dropped my Samsung Focus and broke the screen glass. The touch screen works fine and i think only the outer screen glass has to be replaced.
I have searched on internet and found DIY repair videos to replace the LCD screen, but couldn't find any info about replacing the outer glass alone. But read its pretty hard to seperate the glass from LCD and replace it !!!
The LCD screen is costing around 120$ and the outer glass is costing 10-16$. I do not want to spend more unnecessarily if i can find a way to replace the outer glass myself.
Also, Samsung Focus is not oficially released here in India here, so i don't think i can approach the samsung itself.
Any help would be much appreciated.
Samsung focus lcd broken
Hi pranav. Same here , i have a samsung focus and lcd + outer glass screen is broken. In one of the screen replacement video i saw , the outer screen and the lcd as one unit and not seperate. Though , i am not completely sure.
Did you find a way to get the lcd or the outer glass for your phone in India?
Please contact me on [email protected]
Did you find a source for the replacement glass only? Please share.
I found only glass on eBay (hongkong or china i suppose). When i spoke to people from service center, all of them were saying it is not possible to replace only glass and they wont do it !!! i i don't know if it is really tough or they do not want to take much pain replacing glass and want to replace the whole LCD set which is easy for them.
And the total LCD + Digitizer + glass kit, i found it for 103$ in eBay US, and for 120 - 140$ in some other repair sites and Amazon.
Waiting for get the replacement from US as it costs less and get it fixed in a samsung service center.
Don't think that's possible. After all, the whole point of "super" in super amoled is that the glass is bonded to the display.
red12355 said:
Don't think that's possible. After all, the whole point of "super" in super amoled is that the glass is bonded to the display.
Click to expand...
Click to collapse
ohh .. din do much reading abt it..
anyways, planning to get a new screen.
Can some one let me know if all the available replacements on eBay or Amazon are original samsung parts or not !!!
HI Frnds,
I also lost my samsung focus S 4G outer screen, phone is working find and the touch also, smooth as it was before. The outer glass got a hair line crack all over the screen. It fell on hard surface and got the crack.
Please help me to get the outer glass.
Thanks Guys! waiting for your reply.
Glass replacement
c0dezer0 said:
HI Frnds,
I also lost my samsung focus S 4G outer screen, phone is working find and the touch also, smooth as it was before. The outer glass got a hair line crack all over the screen. It fell on hard surface and got the crack.
Please help me to get the outer glass.
Thanks Guys! waiting for your reply.
Click to expand...
Click to collapse
I've purchased the glass only and I'm waiting for it to arrive. It was very cheap and if it doesn't work, I'm not going to be too upset for buying it for about $11.00.
bit.ly/JiU1QQ
Amazon also has unit which is the LCD and digitizer already assembled.
amzn.to/ScR33n
I can update if and when I receive my replacement glass from gogotoshop. I find the place questionable but used paypal and can dispute the transaction if it isn't legit.
BTW....removing the glass & digitizer is not an easy task. From attempting to remove my broken screen, I don't think it is possible to remove it from the LCD as the previous posters mentioned.
mine is i937
Thanks for reply, But my phone is Samsung focus s (i937), and I didnot find the front class or Digitizer or LCD or all together.
I have the same problem the front glass broken. other things are ok, I asked on sumsung service center they said the whole thing has to change, I am sure experts can change only the front class.
Anybody has any idea about if I can buy it in India or any site who can ship to India.
or in UK, my frnd is coming from there I will ask him to buy there for me.
Please guys help me.
Thanks,
http://www.ebay.com/itm/New-Black-L...t=LH_DefaultDomain_0&hash=item3f17fbc4a8#shId thats is what i found but they dont ship to india
Mr. Raza said:
http://www.ebay.com/itm/New-Black-L...t=LH_DefaultDomain_0&hash=item3f17fbc4a8#shId thats is what i found but they dont ship to india
Click to expand...
Click to collapse
that is focus not focus s.
Thanks Raza, but this is for samsung focus (i917), and my phone is samsung focus s (i937).
Any update guys. am trying hard to get this upper class in India
keep posted frnds.
SAMSUNG I917 / Focus
Finally got my replacement LCD unit from US eBay. Actual seller is from china though.
Spoke to the Samsung service center guys and they are ready to do the replacement for a nominal service charge....
Going to service center now...
Broken Front Glass lens i937
c0dezer0 said:
Thanks Raza, but this is for samsung focus (i917), and my phone is samsung focus s (i937).
Any update guys. am trying hard to get this upper class in India
keep posted frnds.
Click to expand...
Click to collapse
Hi,
I also have a broken glass lens Focus S, did anyone got replaced the glass lens only here?
Please help???
Glass replacement and new glass glued on
*Learn to remove glass only and glue on new glass*Refurbish glass only on any cell phone and glue and cure with uv lightIcellular.wildapricot.orgYou can remove the glass only on galaxy s2, s3, s4 note 1, note 2, iphone 4, iphone 5 and just about any phone.If you have the right training anyone can do it. My company teaches a refurbish specialist training class on removing and glueing on a new glass. It is two days and includes hands on step by step instruction. We also have a repair shop and we do this repair daily for our customers. We remove the glass, glue on a new one, and cure it with an 100% success rate. So spread the word anyone can do it.
Anybody got Focus S i937 upper glass
Hi Frnds, do anyone got the screen only?
or If I got the screen, is it possible to change? because digitizer and upper screen is bonded and not sure it can be change or not.
UV Glass only replacement
justsavegadgets said:
*Learn to remove glass only and glue on new glass*Refurbish glass only on any cell phone and glue and cure with uv lightIcellular.wildapricot.orgYou can remove the glass only on galaxy s2, s3, s4 note 1, note 2, iphone 4, iphone 5 and just about any phone.If you have the right training anyone can do it. My company teaches a refurbish specialist training class on removing and glueing on a new glass. It is two days and includes hands on step by step instruction. We also have a repair shop and we do this repair daily for our customers. We remove the glass, glue on a new one, and cure it with an 100% success rate. So spread the word anyone can do it.
Click to expand...
Click to collapse
So just like the samsung and iphone models, the focus and focus s can be done the same way? I know for a fact that the galaxy s4 Active is best done by machine. Since ive tried but failed to do one. I have removed the glass from a galaxy s3 mini successfully, should this phone be the same? Please respond quickly!
Thank you
Hello
I have an question about the galaxy S 9000/9001
I dont understand how the touchscreen works, is there no digitzer or is the digitizer integraded in the amoled screen? I repair phone,s but HTC uses a glas digitizer and samsung not.
i hope somone could tell my how it works,
sorry for my bad englisch,
Greets
Wilbert
wippie said:
Hello
I have an question about the galaxy S 9000/9001
I dont understand how the touchscreen works, is there no digitzer or is the digitizer integraded in the amoled screen? I repair phone,s but HTC uses a glas digitizer and samsung not.
i hope somone could tell my how it works,
sorry for my bad englisch,
Greets
Wilbert
Click to expand...
Click to collapse
This should have been asked in the Q&A forum.
The difference between the galaxys and note is that the note has a wacom touchscreen & pen. The galaxys only has a touchscreen and does not support pens like the note has.
Sent from my SAMSUNG-SGH-I717 using xda premium
i dont think you understand me,
I repair smartphone,s and sell them. Normally a touchscreen contains of a plate of glass (digitzer) and the lcd screen that is under the digitzer. so you look trough the digitzer at the lcd and the digitzer register what you are doing with you finger. So, the galaxy S1 en the galaxy S plus has a screen within a digitzer or somthing. On ebay you can buy glass frontplate (not a digitzer a glass frontplate) what fell over the screen, but i dont find a video how you can instal these. normally you can simply put the lcd and the digitzer out but if you do that by a s1 you scratch the screen.
From what I can see there, it is a single unit. So I would guess you could not only replace the digitizer.
As i recall they are glued together and really hard to separate,that's also why u rarely see dust and moist under the glass of the sgs
I had a broken glass and i had to change the hole unit. It is very expensive. Glass and lcd costs 170 €.
Sent from my GT-I9001 using XDA
wintel is right. The digitizer is fused/glued onto the LCD screen directly. There's no easy way to separate the two. Theoretically you can buy the two separately, but then you will have to find a way to glue the two together yourself.
Hey everyone,
New here and hoped to get some help right off the bat.
A company i957 (Tab 8.9) was dropped prior to a case being applied and broke the glass on the screen. The LCD is fine but the glass needs replacing. I have already purchased the glass and have the Tab apart. My question is in regards to the fusing process. Is the screen just glued to the LCD surround? Whats the best way to remove it? Simply pry? My biggest worry is it cracks more when a small amount of prying occurs. At this point I don't are about the glass as its toast anyway, just worried about the LCD.
Any help would be hugely appreciated!
I'm not sure if anyone has even done a teardown
Sent from my SGH-I727 using xda premium
Here is a pic teardown I found
soludsnake said:
Hey everyone,
New here and hoped to get some help right off the bat.
A company i957 (Tab 8.9) was dropped prior to a case being applied and broke the glass on the screen. The LCD is fine but the glass needs replacing. I have already purchased the glass and have the Tab apart. My question is in regards to the fusing process. Is the screen just glued to the LCD surround? Whats the best way to remove it? Simply pry? My biggest worry is it cracks more when a small amount of prying occurs. At this point I don't are about the glass as its toast anyway, just worried about the LCD.
Any help would be hugely appreciated!
Click to expand...
Click to collapse
I have a similar issue with LCD working but glass cracked. According to this site, it's completely fused together.
http://www.techrepublic.com/photos/cracking-open-the-samsung-galaxy-tab-89/6327263?seq=25
I'm still looking for a pre-fused assembly for my SGH-I957. If you have ever tinkered with replacing the touch for an crapple thingy (iphone/ipod touch), it's completely the same issue. The digitizer and lcd are one with some type of adhesive. However for the crapple thingy, u were able to get the complete assembly, just the glass or just the lcd. If you used glass and lcd non fused, the touch would work but was not very responsive quite a bit. I tried several clear adhesives (very messy) but could not locate the correct one. a few possible ones worked but had a yellowish hue after a while or bubbles in it.
I'm at the point to where ima sell my cracked SGH-I957 and use what little change i get from it towards a replacement one. I hope this was of some help to you.
---------- Post added at 07:14 AM ---------- Previous post was at 06:56 AM ----------
Forgot to add...
If you wanted to try and separate the adhesive from them, you can try this: (I am not responsible for any damage caused by this. Procees at own risk ans this will likely damage the LCD)
Take a clothes iron and set it to the lowest temp possible. Place the iron over the glass+lcd fused assembly for 5-10min (what this will do is simulate the heat as if you left the tablet in the car in the heat) it will make the adhesive loose or tacky to where you can attempt to pry the lcd away. Be careful as the lcd is very fragile and will crack very easily.
I DON'T RECOMMEND doing this unless you just want to try it. I did with crapple stuff and only cause 2 dead pixels on the screen. Then went and played with several adhesives. Went through several touch and lcd but I had a set dollar amount I was wiling to blow on that experiment. End result was pony up and buy prefused assembly. Once did that, returned crapple back to lil sis who then sold her crapple device. YA! for her.
Check my post on Replacing the GT-P7310 Digitizer.
Sent from my GT-P7310 using XDA Premium HD app
So it responds as if the adhesive was fused/stuck in between the lcd and digitizer? Is there any lag or lack of response with the multi-touch? If it works great, I'll order me a digitizer off ebay or amazon and give a stab at it.
Thanks for the info in your post: http://forum.xda-developers.com/showthread.php?t=1894620
Works and feels just like the original. Only without a set of ruddy great scratches from my keys.
Basically the digitizer is held on with strong double sided tape. Its that simple. There are videos on YouTube for the original Galaxy Tab, and the same principle applies.
Sent from my GT-P7310 using XDA Premium HD app
Thanks! Good to know it wont be like the crapple thing I mentioned above. Just ordered me a digitizer off ebay.
You're welcome. Set yourself an hour to do the changeout, and find somewhere clean & well lit. Good luck!
Sent from my GT-P7310 using XDA Premium HD app
i have the same problem , where did you buy the replacement screen ? thanks
I got mine off ebay
primiano said:
i have the same problem , where did you buy the replacement screen ? thanks
Click to expand...
Click to collapse
Well, i ended up getting the touch/digitizer only. Search "Samsung Galaxy Tab 8.9 P7300 P7310 P7320 Touch Screen Glass Digitizer" and pick your seller. I will note that since I had the at&t version marked by the logo on top right corner., The replacement was OEM so no at&t logo which was fine and it fitted perfectly. You may also find some on amazon and other various part sites.
If you are looking for the LCD screen, search LCD Samsung Galaxy Tab 8.9 on ebay and sort highest 1st to quickly locate the actual LCD screens. Hope this helps