Related
Thats all, it just get the boot image but it doesnt start, i use TWRP recovery and on installing other roms it doesn't do a ****.
Carga la imagen de la rom, pero TWRP recovery no me instala ninguna rom correctamente.
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Huawei Ascend P7
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Ascend P7 Q&A, Help & Troubleshooting
Good luck!
andi2garcia said:
Thats all, it just get the boot image but it doesnt start, i use TWRP recovery and on installing other roms it doesn't do a ****.
Carga la imagen de la rom, pero TWRP recovery no me instala ninguna rom correctamente.
Click to expand...
Click to collapse
Have you tried a full wipe? Application cache and other stored stuff can force the device into a bootloop.
Did you read installation notes?
Installation: (All wanted files inside package !)
Backup your important data (use HW Backup application)
Unpack downloaded files to external SD card
Install Stock recovery B609 (by fastboot) and wipe data/factory reset (by stock recovery)
""Install CWM recovery (by fastboot)""
Install P7-My-RoM_v3.3.zip (by CWM recovery)
Install SuperSU-v2.40.zip (by CWM recovery)
Reboot
When CWM ask for fixing root - select YES
Configure system
Settings -> Screen saving -> On
Open XPosed app
Modules -> Select all (or wanted) preinstalled modules
Framework -> Installation mode -> Disabled resource hooks
Framework -> Install/update
Reboot
Open HW Backup
Restore data from backup
I have flashed the correct twrp for my Moto G6 and when entering for the first time the twrp asks me for a code and 2 options appear, one is to cancel and the other is language. Also to restart it and re-enter twrp mode no longer appears the twrp.
copetestag said:
He flasheado el twrp correcto para mi Moto G6 y al entrar por primera vez al twrp me pide un codigo y aparecen 2 opciones una es cancelar y la otra es idioma. También al reiniciarlo y volver a entrar en modo twrp ya no me aparece el twrp.
Click to expand...
Click to collapse
English please: I have flashed the correct twrp for my Moto G6 and when entering for the first time the twrp asks me for a code and 2 options appear, one is to cancel and the other is language. Also to restart it and re-enter twrp mode no longer appears the twrp.
---------- Post added at 09:51 PM ---------- Previous post was at 09:42 PM ----------
copetestag said:
He flasheado el twrp correcto para mi Moto G6 y al entrar por primera vez al twrp me pide un codigo y aparecen 2 opciones una es cancelar y la otra es idioma. También al reiniciarlo y volver a entrar en modo twrp ya no me aparece el twrp.
Click to expand...
Click to collapse
Get rid of encryption as TWRP can't decrypt data well by 1) FORMAT data (not just wipe data) which clears all files on "internal sd"; external sd card will be fine. 2) install no verity boot.img from your corresponding stock rom version (available on Android File Host--see instructions on main TWRP and root thread). 3) Install No Force Encrypt zip (also available from same thread, for Oreo only)
Hello there. Hope this helps!
FIRST OF ALL, this WILL VOID your waranty. Read the steps BEFORE doing anything.
WEWEWEWE lessgooo:
UNLOCK BOOTLOADER: It's not "easy" at all (You'll have to open your tab).
Go to device info on tab settings.
Press compilation number for several times until "you're a dev" message appears (It'll prolly ask your pattern/password to continue).
Go to dev options and enable OEM unlocking.
Shut down the tab.
Download PotatoNV sofware from here. (Credits to mashed-potatoes)
Download minimal adb and fastboot from here.
Prepare your environment:
Open your tablet
Grab a clip or a cable
Keep your cool
Follow the steps shown here.
Here you have an image of where the testpoint is.
FLASH TWRP INTO THE TAB:
Follow CAREFULLY this steps:
Shut down the tab
Connect the tab to the PC and hold vol- & pwr button.
Now it'll appear a white screen with some text. If it appears "OEM unlock" in green, then everything's fine. IF NOT, follow unlock bootloader steps again. Then try rebooting into fastboot mode again (vol- & pwr).
Download most compatible TWRP from here.
Open Minimal ADB and Fastboot and write this:
"fastboot flash recovery_ramdisk path_of_twrp.img" (Move twrp to minimal adb folder for no complications)
It should appear everything OK.
Type "fastboot reboot"
Fastly disconnect the tab from PC and hold vol+ & pwr button before Huawei logo appears (if it appears, just do a hard reboot (hold pwr button) and try again.
You're now booting into TWRP!
DOWNLOAD RESOURCES AND PREPARE YOURSELF FOR THE PARTY (This is the most important step)
Download data decrypter from attached files below the post (decryptemui8.zip)
Download ROM from here (credits: @DarkJoker360 ) DarkJoker's Post here
(OPTIONAL) Download Nikgapps from here
ONCE in TWRP, flash decrypter (decryptemui8.zip) on "install" option
Go to wipe>advanced wipe and select: dalvink/art cache, cache, data, internal storage and system.
Return to main menu and go to reboot>reboot bootloader
Connect your device to the PC (while rebooting) and wait to be into bootloader (white screen with a droid).
Open minimal adb and fastboot tools and type:
"fastboot flash system path_of_rom.img" (it MUST be decompressed to an .img file)
Wait...
Once it has finished, type: "fastboot reboot"
DONE! you have LOS18.1 now!
(optional gapps on next step)
GAPPS INSTALLATION ON MEDIAPAD T5 IT'S DIFFERENT FROM OTHER PHONES!!!!!!!
FOLLOW THIS STEPS VERY CAREFULLY!!!
Move gapps zip and add-ons to an sd card
Reboot to TWRP
Go to mount>select system. Return to main menu
Go to advanced>file manager
Go to system>system_ext>apex.
Once in apex, enter on vndk27 and vndk28 and delete them (once in vndk27/vndk28 folder, in the bottom-right corner, it'll appear a symbol with a folder with a "tick" on it. Just tap it)
LEAVE ONLY VNDK CURRENT AND VNDK26 FOLDERS (and the rest obviously. Just delete 27/28)
Return to main menu
Go to wipe>advanced wipe. Select system and tap on repair/resize partition (slide to continue)
Then go to main menu>install and install gapps as usual (sliding lol)
FOR ROOT METHOD:
Just follow the steps shown on the main post.
WORKING ROOT CAN ONLY BE DONE WITH MAGISK METHOD (installing apk for using preroot MUST perform random SystemUI reboots ; ).
---------CREDITS---------
Amazing rom: @DarkJoker360
HI6250 support group here.
JOIN T5 SUPPORT GROUP CLICKING HERE
Hey,
I've tried this, but cant get it too boot.
My device is Huawei AGS2-W09.
I've unlocked the bootloader/installed twrp, flashed the decrypter etc.
Then after i do fastboot reboot, it loads up the Lineage OS splash/loading screen, but stays on that for about 10 mins, then reboots and goes to Huawei eRecovery screen.
I've tried repeating the steps, in case it didn't flash properly.
Any ideas?
hobbitjack said:
Hey,
I've tried this, but cant get it too boot.
My device is Huawei AGS2-W09.
I've unlocked the bootloader/installed twrp, flashed the decrypter etc.
Then after i do fastboot reboot, it loads up the Lineage OS splash/loading screen, but stays on that for about 10 mins, then reboots and goes to Huawei eRecovery screen.
I've tried repeating the steps, in case it didn't flash properly.
Any ideas?
Click to expand...
Click to collapse
For those facing problems:
PM Me via telegram @Fosanz
JOIN T5 SUPPORT GROUP
I will post the solutions here on the main post as problems appear
Hello,
I have tried too, and I have had exactly the same problem. I couldn’t boot into system.
I followed all the steps as described. I have AGS2-W09 and I was on Lineage 16.0.
Now I’m back again on Lineage 16.0, waiting if there is a solution.
borja113 said:
Hello,
I have tried too, and I have had exactly the same problem. I couldn’t boot into system.
I followed all the steps as described. I have AGS2-W09 and I was on Lineage 16.0.
Now I’m back again on Lineage 16.0, waiting if there is a solution.
Click to expand...
Click to collapse
Recover system with eRecovery and follow steps again. Instructions modified. Making a factory reset is not neccesary
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
kamilmirza said:
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
Click to expand...
Click to collapse
Everything works. No face unlock as LOS16. Animations are simply beautiful, very optimized. Here you can pass safetyNet with some easy tweaks. Battery it's amazing. 1% in 6h deep sleep. While using it (6-7 hours of gaming, instagram, telegram, etc.) battery drain it's amazing. I'll share some screenshots on the telegram group
Fosanz said:
Recover system with eRecovery and follow steps again. Instructions modified. Making a factory reset is not neccesary
Click to expand...
Click to collapse
Follow steps again….Yes, but what will change if I do it again. Same tablet, same instructions. I would like to know first what was wrong. I want to avoid spending hours trying and after that restoring, until I’m sure it will work for me.
Anybody else managed to install LOS18 ? If yes please describe how you did it and from which environment you’re coming.
Does it work for AGS2-L03?
Or this ROM only work for some Variant?
I think mine only has 16GB storage and 2GB RAM.
Also the eRecovery, does it only update or can it flash the full image?
borja113 said:
Follow steps again….Yes, but what will change if I do it again. Same tablet, same instructions. I would like to know first what was wrong. I want to avoid spending hours trying and after that restoring, until I’m sure it will work for me.
Anybody else managed to install LOS18 ? If yes please describe how you did it and from which environment you’re coming.
Click to expand...
Click to collapse
Join support group duh.
theflyingsquirrel said:
Does it work for AGS2-L03?
Or this ROM only work for some Variant?
I think mine only has 16GB storage and 2GB RAM.
Also the eRecovery, does it only update or can it flash the full image?
Click to expand...
Click to collapse
Yeah it should work. Same processor but different amount of Ram. Try it out! Join t5 (Bottom of the main post) support group if you're facing problems!
Fosanz said:
Join support group duh.
Click to expand...
Click to collapse
OK, so, if anybody wants to try to install L0S18, go right away and join Telegram group of this member, beacuse the suport is not provided here (entendi bien?). What is the purpose of this forum then?
borja113 said:
OK, so, if anybody wants to try to install L0S18, go right away and join Telegram group of this member, beacuse the suport is not provided here (entendi bien?). What is the purpose of this forum then?
Click to expand...
Click to collapse
Debido a que tú pregunta no tiene nada que ver con la instalación, sino que estás preguntando por los cambios hechos, no voy a empezar ni una discusión ni una conversación por un hilo con tal de evitar overflooding de mensajes. Así que por favor y si no te molesta, te asistiré por Telegram, de manera que el problema que tú tengas pueda ser solucionado lo más rápido posible para yo poder modificar lo que pueda estar mal en el hilo principal y así no hacer que la gente que quiere instalar Lineage solo mirando el thread principal (que lo hace la gran mayoría) tenga el mismo error que tú y vuelva a preguntarme lo mismo.
Y si, hay gente que ha logrado instalar Lineage os 18.1 correctamente y gracias a que se unió al grupo pude modificar partes de la instalación que eran cruciales para otros modelos de mediapadt5.
Un saludo
Has anyone else successfully installed LO18? I tried going from LO16 to 18 and this didn't work for me. I'm gonna give it a second try when I have more time on my hands. Maybe I'll have more luck going from EMUI to LO18.
Firts of all thanks for the efford you guys spend into a working solution for our device. Second I apology for not joining Telegram group, I simply don't use it.
Device: AGS2-W09 - came from stock
Yesterday the device was successfully booting into LOS18. Might have to do with the new Huawei-Decrypt file. Before I was also getting a boot loop.
LOS is working quite well as I can tell until now.
Aditionally installed apps (sideloaded or alternative store) are freezing after a while. I suspected a dependency to gapps. The apps I tested Brave Browser, Aurora Store, VLC.
Tried to install Nikgapps (core and then basic) but it didn't work. TWRP console tells me installation was successful, but no gapps appear after the boot. I tired BiTGApps package and that was successful.
Additionally installed apps still freezing after a while.
korale said:
Firts of all thanks for the efford you guys spend into a working solution for our device. Second I apology for not joining Telegram group, I simply don't use it.
Device: AGS2-W09 - came from stock
Yesterday the device was successfully booting into LOS18. Might have to do with the new Huawei-Decrypt file. Before I was also getting a boot loop.
LOS is working quite well as I can tell until now.
Aditionally installed apps (sideloaded or alternative store) are freezing after a while. I suspected a dependency to gapps. The apps I tested Brave Browser, Aurora Store, VLC.
Tried to install Nikgapps (core and then basic) but it didn't work. TWRP console tells me installation was successful, but no gapps appear after the boot. I tired BiTGApps package and that was successful.
Additionally installed apps still freezing after a while.
Click to expand...
Click to collapse
Hey Hi!.
Glad to hear you booted! The problem was at the decrypter.
Also, a lot of people are having trouble installing NikGapps. It seems that the package is "wrong" in some way for our device. Reported the issue. Until July 2021 update, devices go very slow. Hopefully, there's a way to fix it .
adb root && adb remount /system
adb push local.prop /system/product/etc/prop/local.prop
Credits to @DarkJoker360
Extracted from HI6250 support group
local.prop file is on "attached files"
I finally had some time to try installing LineageOS 18.1 again. Works beautifully, Magisk and everything. Make you sure you go straight from EMUI to LineageOS 18.1, it doesn't work if you switch from Lineage 16 to 18.1.
In my case I needed to open to the tablet again after doing a Huawei system restore back to EMUI, it relocked my tablet, just be aware of that, that was mildly annoying.
Also make sure you use the Magisk mentioned in the thread if you want root. After installing, don't let Magisk update itself from within the app, updating the ramdisk will remove TWRP and the system will bootloop until you reflash TWRP. It will boot again normally with your stuff still intact after the TWRP reflash.
Been playing around with it for a bit, doesn't seem to have some of the annoying LineageOS 16 bugs. It has full screen navigation controls which I really wanted and was missing earlier. Android 11 (Juli 2021 security update), MicroG is working, seems responsive and smooth. Great! I am very happy with this.
Thanks and special shout out to all the people making this possible, y'all are amazing.
Just as a hint. I don't think you need to open your tablet again.
Keep the unlock code generated by PotatoNV save. In my case I relocked and unlocked the tablet several times with the unlock code without the testpont method.
hi, i just got to the part that i have to make a img file out of the rom zip file....
help pls
can i flash the other img files on the site? (the 650 mb files)
can i flash the new rom from twrp?
thx
kamilmirza said:
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
Click to expand...
Click to collapse
Fosanz said:
Hello there. Hope this helps!
FIRST OF ALL, this WILL VOID your waranty. Read the steps BEFORE doing anything.
WEWEWEWE lessgooo:
UNLOCK BOOTLOADER: It's not "easy" at all (You'll have to open your tab).
Go to device info on tab settings.
Press compilation number for several times until "you're a dev" message appears (It'll prolly ask your pattern/password to continue).
Go to dev options and enable OEM unlocking.
Shut down the tab.
Download PotatoNV sofware from here. (Credits to mashed-potatoes)
Download minimal adb and fastboot from here.
Prepare your environment:
Open your tablet
Grab a clip or a cable
Keep your cool
Follow the steps shown here.
Here you have an image of where the testpoint is.
FLASH TWRP INTO THE TAB:
Follow CAREFULLY this steps:
Shut down the tab
Connect the tab to the PC and hold vol- & pwr button.
Now it'll appear a white screen with some text. If it appears "OEM unlock" in green, then everything's fine. IF NOT, follow unlock bootloader steps again. Then try rebooting into fastboot mode again (vol- & pwr).
Download most compatible TWRP from here.
Open Minimal ADB and Fastboot and write this:
"fastboot flash recovery_ramdisk path_of_twrp.img" (Move twrp to minimal adb folder for no complications)
It should appear everything OK.
Type "fastboot reboot"
Fastly disconnect the tab from PC and hold vol+ & pwr button before Huawei logo appears (if it appears, just do a hard reboot (hold pwr button) and try again.
You're now booting into TWRP!
DOWNLOAD RESOURCES AND PREPARE YOURSELF FOR THE PARTY (This is the most important step)
Download data decrypter from attached files below the post (decryptemui8.zip)
Download ROM from here (credits: @DarkJoker360 ) DarkJoker's Post here
(OPTIONAL) Download Nikgapps from here
ONCE in TWRP, flash decrypter (decryptemui8.zip) on "install" option
Go to wipe>advanced wipe and select: dalvink/art cache, cache, data, internal storage and system.
Return to main menu and go to reboot>reboot bootloader
Connect your device to the PC (while rebooting) and wait to be into bootloader (white screen with a droid).
Open minimal adb and fastboot tools and type:
"fastboot flash system path_of_rom.img" (it MUST be decompressed to an .img file)
Wait...
Once it has finished, type: "fastboot reboot"
DONE! you have LOS18.1 now!
(optional gapps on next step)
GAPPS INSTALLATION ON MEDIAPAD T5 IT'S DIFFERENT FROM OTHER PHONES!!!!!!!
FOLLOW THIS STEPS VERY CAREFULLY!!!
Move gapps zip and add-ons to an sd card
Reboot to TWRP
Go to mount>select system. Return to main menu
Go to advanced>file manager
Go to system>system_ext>apex.
Once in apex, enter on vndk27 and vndk28 and delete them (once in vndk27/vndk28 folder, in the bottom-right corner, it'll appear a symbol with a folder with a "tick" on it. Just tap it)
LEAVE ONLY VNDK CURRENT AND VNDK26 FOLDERS (and the rest obviously. Just delete 27/28)
Return to main menu
Go to wipe>advanced wipe. Select system and tap on repair/resize partition (slide to continue)
Then go to main menu>install and install gapps as usual (sliding lol)
FOR ROOT METHOD:
Just follow the steps shown on the main post.
WORKING ROOT CAN ONLY BE DONE WITH MAGISK METHOD (installing apk for using preroot MUST perform random SystemUI reboots ; ).
---------CREDITS---------
Amazing rom: @DarkJoker360
HI6250 support group here.
JOIN T5 SUPPORT GROUP CLICKING HERE
Click to expand...
Click to collapse
Thx alot for the guide and the help in instegram.
It's working for me with my mediapad t5.
Some things that are still a bit dissfunction:
Mobile network dissconnect every 30 seconds and reconnect.
No support for sd card (can't format it in the tablet).
Thanks again,
Ilan
Greetings.
I would like to know what would be the best option to root this terminal. I'm thinking of switching to the Miuimix rom but maybe someone can advise me on a less intrusive way. I want to do it mainly so that I can make complete backups, with the applications and their data; and that you do not have to be with a little notebook writing down passwords.
Thank you all very much in advance.
root is root, rom is rom...
for rooting you must enable magisk after fashing your rom (miui, arrow, lineage... is not important, is the same )
i raccomend flashing last version of magisk
after system boot, from magisk manager enable zygist and flash module safety 2.2.1 for passing safety net
I was commenting about the Miuimix ROM because it is the one that practically comes pre-rooted and in two steps you already have it; but I don't like its appearance very much; I am also very comfortable with xiaomi.eu even if it is a highly criticized rom.
How do I flash magisk? There is no recovery that works well on Android 12.
Is there any tutorial to do it?
I've been searching the forum and what little there is on the subject doesn't work for everyone.
Thanks for everything again.
gintony said:
How do I flash magisk? There is no recovery that works well on Android 12.
Is there any tutorial to do it?
I've been searching the forum and what little there is on the subject doesn't work for everyone.
Thanks for everything again.
Click to expand...
Click to collapse
recovery for a12 work, you must flash last twrp... only problem with this is that your internal memory is not visible... you must have all on external sd for flashing.. rom, magisk etc.. but is simple... usually when you enter in recovery select external sd, flash rom, flash magisk (magisk is .apk, rename.zip before flashing), format and reboot..
aleMarvel said:
la recuperación para el trabajo a12, debe flashear el último twrp ... el único problema con esto es que su memoria interna no está visible ... debe tener todo en sd externo para flashear ... rom, magisk, etc. pero es simple... Por lo general, cuando ingrese a la recuperación, seleccione sd externa, flash rom, flash magisk (magisk es .apk, rename.zip antes de flashear), formatee y reinthanks
Click to expand...
Click to collapse
Gracias por tu respuesta.
Hello everyone, I decided to create this Tutorial for (mainly) people like me, who got their devices from the Chinese version with their ROMs modified for Global.
But I will explain where you should focus if you only have the bootloader unlocked for root and have not modified your system.
1- I'm Brazilian and this text is FULLY by Google translator
2- For Newbies (because the old ones know that) ALWAYS read EVERYTHING, even comments if possible before starting the process.
3- Do it at YOUR own risk, although if you follow it correctly you will succeed.
4- I assume you have: Plataform Tool (ADB & Fastboot) (if you don't start with that on your PCs) your drivers (Motorola) are also installed
What is required for Bootloader Lock?
Be on the correct version of your Firmware, and have the OEM unlock switch in the ALLOW position
Usually when unlocking the bootloader, this key goes off in the off position, and that's why we need Root with Saftnet active for it to turn on and be able to set it to allow again
So for those who ONLY unlocked their bootloader and NOT changed the Firmware (from CN to Global or some Custom Rom)
JUST activate the OEM unlocking option (remembering that you will need root with saftnet passing)
I recommend Magisk Delta (Canary) and Saftnetfix module
Enabled unlock permission remove root by magisk app (TOTAL removal)
Ready you are sure your system is correct has the key deleted but in allowing?
Put your device in bootloader:
adb/reboot/bootloader
or Turn off the device and hold the Power button together with Vol -
fastboot oem lock
And you will have your device locked and everything working as it should.
Now who received with modified ROM or installed a custom one:
Make sure you have the correct update channel (retcn for Chinese, reteu for Europe, or whatever yours is) if it is modified:
fastboot oem config carrier retcn
done that
Go to lolinet Lolinet (CN) , Lolinet (EU), Lolinet (AIL), Lolinet (BR) and download the full ROM for your version (we will only use Smart Rescue at the end to update it It should not recognize your device for redemption before having an old and correct version)
Make sure you download the older version (this is a guarantee thing) as we will use Lenovo Smart Rescue Center to update and be 100% sure we are on the right version.
Extract the files and look for flashfile.xml open with notepad (or any other of your choice) copy everything and paste it on This Site it will give you the commands to pass the ROM, copy the commands and paste in the CMD of the window where I have the ROM files, or download the file (it will come in zip, extract and copy flashfile.bat to the ROM folder and just click on it, wait for the installation and restart
Now activate the developer options and see if you have the OEM unlock key in allow, it will be off but it has to be in allow if you don't do the root process under Magisk pass the saftnetfix module and it should appear lit now and you will be able to put in allow
Done, enter Magisk and remove Root (total removal)
It will restart and you will see that now the key is erased but in allow
So now Lenovo Smart Rescue should allow the Rescue of your device, follow the steps until it installs the most current version, when done, skip everything (as it will restore when blocked) to activate the developer option and USB debugging , then in fastboot use
fastboot oem lock
OK, you should now have your device as it left the factory.
RicoMartins said:
Hola a todos, decidí crear este tutorial para (principalmente) personas como yo, que obtuvieron sus dispositivos de la versión china con sus ROM modificadas para Global.
Pero te explicaré dónde debes concentrarte si solo tienes el gestor de arranque desbloqueado para root y no has modificado tu sistema.
1- Soy brasileño y este texto es COMPLETAMENTE del traductor de Google
2- Para los Novatos (porque los viejos lo saben) SIEMPRE lean TODO, incluso los comentarios si es posible antes de iniciar el proceso.
3- Hazlo bajo TU propio riesgo, aunque si lo sigues correctamente lo lograrás.
4- Supongo que tiene: Plataforma Tool (ADB y Fastboot) (si no comienza con eso en sus PC) sus controladores (Motorola) también están instalados
¿Qué se requiere para el bloqueo del cargador de arranque?
Estar en la versión correcta de su firmware y tener el interruptor de desbloqueo OEM en la posición PERMITIR
Por lo general, al desbloquear el gestor de arranque, esta tecla se apaga en la posición de apagado, y es por eso que necesitamos Rootear con Saftnet activo para que se encienda y poder configurarlo para permitir nuevamente
Entonces, para aquellos que SOLO desbloquearon su cargador de arranque y NO cambiaron el firmware (de CN a Global o alguna Rom personalizada)
SOLO active la opción de desbloqueo OEM (recordando que necesitará root con pase de saftnet)
Recomiendo Magisk Delta (Canario) y módulo Saftnetfix
Permiso de desbloqueo habilitado para eliminar root por la aplicación magisk (eliminación TOTAL)
Listo estas seguro que tu sistema esta correcto se ha borrado la clave pero en permitir?
Pon tu dispositivo en el gestor de arranque:
adb/reiniciar/cargador de arranque
o Apague el dispositivo y mantenga presionado el botón de Encendido junto con Vol -
candado fastboot oem
Y tendrás tu dispositivo bloqueado y todo funcionando como debería.
Ahora quien recibió con ROM modificada o instaló una personalizada:
Asegúrese de tener el canal de actualización correcto (retcn para chino, reteu para Europa o el suyo) si se modifica:
fastboot oem config carrier reetcn
hecho eso
Vaya a lolinet Lolinet (CN) , Lolinet (EU) , Lolinet (AIL) , Lolinet (BR) y descargue la ROM completa para su versión (solo usaremos Smart Rescue al final para actualizarlo. No debería reconocer su dispositivo para redención antes de tener una versión antigua y correcta)
Asegúrese de descargar la versión anterior (esto es una garantía) ya que usaremos Lenovo Smart Rescue Center para actualizar y estar 100% seguros de que estamos en la versión correcta.
Extraiga los archivos y busque flashfile.xml abierto con el bloc de notas (o cualquier otro de su elección) copie todo y péguelo en Este sitio le dará los comandos para pasar la ROM, copie los comandos y pegue en el CMD de la ventana donde tengo los archivos ROM, o descargar el archivo (vendrá en zip, extraiga y copie flashfile.bat a la carpeta ROM y simplemente haga clic en él, espere la instalación y reinicie
Ahora active las opciones de desarrollador y vea si tiene la clave de desbloqueo OEM habilitada, estará desactivada pero debe estar habilitada si no realiza el proceso raíz en Magisk, pase el módulo saftnetfix y debería aparecer encendido ahora y usted será capaz de poner en permitir
Listo, ingresa a Magisk y elimina Root (eliminación total)
Se reiniciara y veras que ahora la clave esta borrada pero en allow
Así que ahora Lenovo Smart Rescue debería permitir el rescate de su dispositivo, siga los pasos hasta que instale la versión más actual, cuando termine, omita todo (ya que se restaurará cuando se bloquee) para activar la opción de desarrollador y la depuración USB, luego en fastboot use
candado fastboot oem
Bien, ahora deberías tener tu dispositivo como salió de f
Click to expand...
Click to collapse
RicoMartins said:
Hello everyone, I decided to create this Tutorial for (mainly) people like me, who got their devices from the Chinese version with their ROMs modified for Global.
But I will explain where you should focus if you only have the bootloader unlocked for root and have not modified your system.
1- I'm Brazilian and this text is FULLY by Google translator
2- For Newbies (because the old ones know that) ALWAYS read EVERYTHING, even comments if possible before starting the process.
3- Do it at YOUR own risk, although if you follow it correctly you will succeed.
4- I assume you have: Plataform Tool (ADB & Fastboot) (if you don't start with that on your PCs) your drivers (Motorola) are also installed
What is required for Bootloader Lock?
Be on the correct version of your Firmware, and have the OEM unlock switch in the ALLOW position
Usually when unlocking the bootloader, this key goes off in the off position, and that's why we need Root with Saftnet active for it to turn on and be able to set it to allow again
So for those who ONLY unlocked their bootloader and NOT changed the Firmware (from CN to Global or some Custom Rom)
JUST activate the OEM unlocking option (remembering that you will need root with saftnet passing)
I recommend Magisk Delta (Canary) and Saftnetfix module
Enabled unlock permission remove root by magisk app (TOTAL removal)
Ready you are sure your system is correct has the key deleted but in allowing?
Put your device in bootloader:
adb/reboot/bootloader
or Turn off the device and hold the Power button together with Vol -
fastboot oem lock
And you will have your device locked and everything working as it should.
Now who received with modified ROM or installed a custom one:
Make sure you have the correct update channel (retcn for Chinese, reteu for Europe, or whatever yours is) if it is modified:
fastboot oem config carrier retcn
done that
Go to lolinet Lolinet (CN) , Lolinet (EU), Lolinet (AIL), Lolinet (BR) and download the full ROM for your version (we will only use Smart Rescue at the end to update it It should not recognize your device for redemption before having an old and correct version)
Make sure you download the older version (this is a guarantee thing) as we will use Lenovo Smart Rescue Center to update and be 100% sure we are on the right version.
Extract the files and look for flashfile.xml open with notepad (or any other of your choice) copy everything and paste it on This Site it will give you the commands to pass the ROM, copy the commands and paste in the CMD of the window where I have the ROM files, or download the file (it will come in zip, extract and copy flashfile.bat to the ROM folder and just click on it, wait for the installation and restart
Now activate the developer options and see if you have the OEM unlock key in allow, it will be off but it has to be in allow if you don't do the root process under Magisk pass the saftnetfix module and it should appear lit now and you will be able to put in allow
Done, enter Magisk and remove Root (total removal)
It will restart and you will see that now the key is erased but in allow
So now Lenovo Smart Rescue should allow the Rescue of your device, follow the steps until it installs the most current version, when done, skip everything (as it will restore when blocked) to activate the developer option and USB debugging , then in fastboot use
fastboot oem lock
OK, you should now have your device as it left the factory.
Click to expand...
Click to collapse
Help me to return to the CN ROM, since they installed the global ROM, to my motorola x30 pro, and I want to have updates via OTA again and see streaming apps
KairosIbiza said:
Help me to return to the CN ROM, since they installed the global ROM, to my motorola x30 pro, and I want to have updates via OTA again and see streaming apps
Click to expand...
Click to collapse
Hi I've been away for a while, do you still have problems doing this? Or has it already been resolved?
RicoMartins said:
Hello everyone, I decided to create this Tutorial for (mainly) people like me, who got their devices from the Chinese version with their ROMs modified for Global.
But I will explain where you should focus if you only have the bootloader unlocked for root and have not modified your system.
1- I'm Brazilian and this text is FULLY by Google translator
2- For Newbies (because the old ones know that) ALWAYS read EVERYTHING, even comments if possible before starting the process.
3- Do it at YOUR own risk, although if you follow it correctly you will succeed.
4- I assume you have: Plataform Tool (ADB & Fastboot) (if you don't start with that on your PCs) your drivers (Motorola) are also installed
What is required for Bootloader Lock?
Be on the correct version of your Firmware, and have the OEM unlock switch in the ALLOW position
Usually when unlocking the bootloader, this key goes off in the off position, and that's why we need Root with Saftnet active for it to turn on and be able to set it to allow again
So for those who ONLY unlocked their bootloader and NOT changed the Firmware (from CN to Global or some Custom Rom)
JUST activate the OEM unlocking option (remembering that you will need root with saftnet passing)
I recommend Magisk Delta (Canary) and Saftnetfix module
Enabled unlock permission remove root by magisk app (TOTAL removal)
Ready you are sure your system is correct has the key deleted but in allowing?
Put your device in bootloader:
adb/reboot/bootloader
or Turn off the device and hold the Power button together with Vol -
fastboot oem lock
And you will have your device locked and everything working as it should.
Now who received with modified ROM or installed a custom one:
Make sure you have the correct update channel (retcn for Chinese, reteu for Europe, or whatever yours is) if it is modified:
fastboot oem config carrier retcn
done that
Go to lolinet Lolinet (CN) , Lolinet (EU), Lolinet (AIL), Lolinet (BR) and download the full ROM for your version (we will only use Smart Rescue at the end to update it It should not recognize your device for redemption before having an old and correct version)
Make sure you download the older version (this is a guarantee thing) as we will use Lenovo Smart Rescue Center to update and be 100% sure we are on the right version.
Extract the files and look for flashfile.xml open with notepad (or any other of your choice) copy everything and paste it on This Site it will give you the commands to pass the ROM, copy the commands and paste in the CMD of the window where I have the ROM files, or download the file (it will come in zip, extract and copy flashfile.bat to the ROM folder and just click on it, wait for the installation and restart
Now activate the developer options and see if you have the OEM unlock key in allow, it will be off but it has to be in allow if you don't do the root process under Magisk pass the saftnetfix module and it should appear lit now and you will be able to put in allow
Done, enter Magisk and remove Root (total removal)
It will restart and you will see that now the key is erased but in allow
So now Lenovo Smart Rescue should allow the Rescue of your device, follow the steps until it installs the most current version, when done, skip everything (as it will restore when blocked) to activate the developer option and USB debugging , then in fastboot use
fastboot oem lock
OK, you should now have your device as it left the factory.
Click to expand...
Click to collapse
Hi Bro,
The older version of Lenovo Smart Rescue always requests upgrade to the latest. Or it will be auto closed. Can I just skip this step to flash the firmware by coverted commands without this application?
Thank you!
Hello friend!
I've never tried it this way, you can try it, once Smart Recue recognizes your device and agrees to update it shouldn't have any problems. But I believe this will not happen. For the Update steps by commands via fastboot are precisely for the tool to recognize the device and perform the update.
Pay attention only to blocking it only in the CN version (as I said, I never did it otherwise, so I don't know if the tool can be updated to a global version).