Database Develop

[Q] How to start over?

I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.

atquick said:
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
Click to expand...
Click to collapse
http://goo.gl/7NoAv

Androidsims said:
http://goo.gl/7NoAv
Click to expand...
Click to collapse
Tried that. It keeps failing saying something about size was not as expected or something like that.

Redownload?

Avelnan said:
Redownload?
Click to expand...
Click to collapse
I have. MD5 sums match up each time. Should I try removing the ext sd card?

I would redownload everything and try agian

littleneutrino said:
I would redownload everything and try agian
Click to expand...
Click to collapse
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?

atquick said:
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
Click to expand...
Click to collapse
Downloading the sbf's again. Went over to check and see if the phone was still on, The charging led is on, however the screen is off..
Held power, nothing. Held M + Power. Still nothing... Any thoughts on whats going on now?

I didn't see if you have pulled the SD card but yeah it can't hurt.
Sent from my DROID3 using XDA App

http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium

wattnxt said:
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It keeps failing.
Step 3 mbmloader.bin
Step 4 mbm.bin
Step 8 logo.bin
Step 9 'lbl'
I'm stuck.

Let me do some looking when I get home tonight. I remember there being a file for certain versions of XP that helped some people and they couldn't flash without it.
I never had it happen personally, but I know those that did were terribly frustrated.
I also hear the 959 version is easier to flash for some reason. Never flashed that version, so this is only hear-say. But I know it did flash easier according to posts.
I will try to dig up a link for you.

i am getting the same thing also getting the bad CG boot.. now this may be a fix but idk how this guy got it it.. i have been asking eveywhere maybe you guys could help me... here is the thread http://forum.xda-developers.com/showthread.php?t=1248721

I found this by Psouza. He is likely the foremost expert on making things easy as far as unbricking your D3. Rumor has it he has a set of unbrick tools floating around this forum somewhere, though I haven't found it yet. Try in the Development thread, for sure it has to be there somewhere.
Post number 84
psouza4 said:
For those of you having problems flashing this and/or are suspicious of flashing ebr, mbr, and parts of the bootloader, you can selectively just flash the rest of it.
See attachment.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=715510&d=1315657647
Hope this helps.
I also saw that flashing the pre-installs file alone first helped someone. That file borked on me once, but I was able to adb it over and then execute it via adb to get my phone unbricked.
Please let us know what works for you, as all of this is a work in progress right now.
Good luck!

i don't know to much about adb and are looking for help on pre-installed files. I don't understand what that means or how to go about it? i also cant get past the bootloader screen, "invalid CG version". i can not boot up at all.

How bricked are you? can you boot into CWM? Are you able to boot into tools, or how far can you get?
What version were you running? 5.959 (stock) or 6.890 OTA or Leaked OTA or Soak test (all the same as far as 6.890 goes).

i can get into boot tools and just tryed another flash got to step 6 till it failed instead of 3.. I'm running stock. Cannot get passed boot tools... scratch all that just tried to flash again just on the off chance it mnight work and i got it. Going to try and re-root and CWN recovery with sdteel froids rom... will keep you in the loop

Awesome!!
Here is the link about the adb commands for preinstall.sh
http://forum.xda-developers.com/showpost.php?p=17196391&postcount=88
It helped me when I borked my leaked update. I ran into the same problem as limaxray did with too many files in /system. So make sure you clean out any apps you made into system apps before trying the update via the standard update route, and that all stock system apps are in place and properly named.
I had to remove some that updated partially with the leaked update when mine borked. I used the posted system dump to push them to the phone and then the update ran properly and updated them anyhow.
If for some reason re-rooting doesn't work for you. Go to /system/bin and remove su, busybox. Do the same in /system/xbin. For some reason if you already have them in there when you run the process, it will say success but no root after reboot. My 2c as it happened to me. You do not need to remove superuser.apk, but you will have to update it in the market after you re-root.
Congrats!!
I see now too there is a fastboot and moto-fastboot. moto-fastboot has worked for some who had issues from what I've found.
Keep us posted, and smile knowing you've recovered from a bork; none of us got where we are without doing it at least once, so you're in good company.

re-rooted and installed bootstrap, just got steel droid all loaded up and all is good.... thanks for your speedy responses and detailed instructions and links. I realy think all that happened was i took everything aet it sone last time tried to flash and it went threw. All i used was RSD lite and flashed the 8.6.590 fast boot file and after a several retries it went threw. If anyone needs help on this i will post the file links if you need the ones i used

RAZR recovery on Droid 4?

Anyone tried using the RAZR recovery on the Droid 4? Lookin to do up the Arctic rom, but would feel much better if I could get a nandroid.
EDIT: This is the link to the RAZR recovery I was mainly thinking of: http://forum.xda-developers.com/showthread.php?t=1385283

jgardner said:
Anyone tried using the RAZR recovery on the Droid 4? Lookin to do up the Arctic rom, but would feel much better if I could get a nandroid.
EDIT: This is the link to the RAZR recovery I was mainly thinking of: http://forum.xda-developers.com/showthread.php?t=1385283
Click to expand...
Click to collapse
Why not do the nandroid with safestrap?

I didn't think safestrap was working with the D4?

jgardner said:
I didn't think safestrap was working with the D4?
Click to expand...
Click to collapse
I dont know whats going on lol.....everyone is coming with all these different stories. I used the root exploit that was out and used the safestrap for recovery. I dont think I did anything different than anyone else. And then i took a chance flashing a Razr rom

Oh yeah, the original utility had the safestrap didn't it? The latest utility doesn't anymore (although I think it works).
Sent from my DROID4 using Tapatalk

jgardner said:
Oh yeah, the original utility had the safestrap didn't it? The latest utility doesn't anymore (although I think it works).
Sent from my DROID4 using Tapatalk
Click to expand...
Click to collapse
I took it out until Hashcode brings it out for Droid 4. I've been corresponding with him and if the maker of Safestrap tells you it isn't safe to use on Droid 4 yet then you usually should listen.
All up to your risk though.

I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?

Briteyez83 said:
I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?
Click to expand...
Click to collapse
Not yet. There is a reason we have warnings on these...
I hope we get fastboot yet. You cannot just "make them" they have to be leaked.
FYI Motorola does Fastboot files, not SBF now.

mattlgroff said:
Not yet. There is a reason we have warnings on these...
I hope we get fastboot yet. You cannot just "make them" they have to be leaked.
FYI Motorola does Fastboot files, not SBF now.
Click to expand...
Click to collapse
Im new to root even though i have learned pretty quick. Finally after much pain and suffering got my X's bootloader unlocked and rooted some time in Nov. What does leaked mean and what is the difference between fastboot files and sbf?
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
As far as the warnings i didnt see the warning to not use safestrap till i got on here and it was to late. I figured since i was able to boot into recovery and make a backup i would be ok

Briteyez83 said:
Im new to root even though i have learned pretty quick. Finally after much pain and suffering got my X's bootloader unlocked and rooted some time in Nov. What does leaked mean and what is the difference between fastboot files and sbf?
Click to expand...
Click to collapse
You would be Man of the Year if you did that. You mean you bootstrapped it, right?
Leaked means they have to trickle out from Motorola/Verizon somehow.. either on purpose or by "accident" somebody on the inside putting them out there for use by our wonderful devs.
As for SBF vs fasboot, i dont know exactly the difference but think of them as different types of "recovery" that can be used to fully restore your phone to factory condition.

Briteyez83 said:
I made a nandroid using safestrap, or thought i did. I made my backup so i figured i would try that arctic rom so i followed the directions step by step. After i wiped cache and factory reset i went install from sd and the arctic rom that i know i put on it was not there. So i figured i would flash back to the backup i just made and try the process of putting the arctic on my sd. Some how i ended up bricking my phone and am now stuck in bootloader and my device is looked. Have you or anyone else made an sbf, oneclick recovery or a way to unbrick my D4?
Click to expand...
Click to collapse
Which FASTBOOT error are you seeing? It should be referencing one of the partitions.
Sent from my DROID4 using XDA App

greekchampion04 said:
You would be Man of the Year if you did that. You mean you bootstrapped it, right?
Leaked means they have to trickle out from Motorola/Verizon somehow.. either on purpose or by "accident" somebody on the inside putting them out there for use by our wonderful devs.
As for SBF vs fasboot, i dont know exactly the difference but think of them as different types of "recovery" that can be used to fully restore your phone to factory condition.
Click to expand...
Click to collapse
Yes, i mean bootstrapped and you mean woman of the year, right? My bf said the difference between the two is SBF your makinga mirror image of everything and doing a complete system dump and fastboot is just cutting the power for a split sec. It will clear your immediate cache but some memory is still there.

Briteyez83 said:
Yes, i mean bootstrapped and you mean woman of the year, right? My bf said the difference between the two is SBF your makinga mirror image of everything and doing a complete system dump and fastboot is just cutting the power for a split sec. It will clear your immediate cache but some memory is still there.
Click to expand...
Click to collapse
I cant help unless I know what your error message says when you turn on the phone. :/
Sent from my DROID4 using XDA App

Send me your email addy in a message and ill send you a pic of it

Briteyez83 said:
Send me your email addy in a message and ill send you a pic of it
Click to expand...
Click to collapse
Ok, so it's WEBTOP that is behaving badly.
Let me see if I can get an RSD Lite file for you to try. Do you know how to use that?

Hashcode said:
Ok, so it's WEBTOP that is behaving badly.
Let me see if I can get an RSD Lite file for you to try. Do you know how to use that?
Click to expand...
Click to collapse
No, i dont. Im new to root, just rooted in nov. If you give me something thst would fix it that would be awesome.

Unfortunately, the fix isn't exactly a simple one.
It comes in 3 parts (assuming you're on Windows):
1. You'll need to download and install RSD Lite which is what is used to flash the fastboot restore files from Motorola:
http://dev-host.org/ug07spima1mq/RSDLite5.5.rar
2. Download and install the Motorola USB drivers to recognize your phone in fastboot mode:
http://www.mediafire.com/?z5qpc8v3xza25e6
3. I'm setting up a mini WEBTOP fastboot restore file based on the latest RAZR fastboot files (I say small.. but it's still quite a large download). The version is slightly off from the D4's but it might be close enough, and I think it's worth a shot:
[ Getting this file setup will take me about an hour, but you can get steps 1 and 2 ready for now ]
ALSO KEEP THE PHONE POWERED OFF FOR NOW TO SAVE BATTERY. FASTBOOT WILL NOT PROGRAM WITH A LOW BATTERY.

Hashcode said:
Unfortunately, the fix isn't exactly a simple one.
It comes in 3 parts (assuming you're on Windows):
1. You'll need to download and install RSD Lite which is what is used to flash the fastboot restore files from Motorola:
http://dev-host.org/ug07spima1mq/RSDLite5.5.rar
2. Download and install the Motorola USB drivers to recognize your phone in fastboot mode:
http://www.mediafire.com/?z5qpc8v3xza25e6
3. I'm setting up a mini WEBTOP fastboot restore file based on the latest RAZR fastboot files (I say small.. but it's still quite a large download). The version is slightly off from the D4's but it might be close enough, and I think it's worth a shot:
[ Getting this file setup will take me about an hour, but you can get steps 1 and 2 ready for now ]
ALSO KEEP THE PHONE POWERED OFF FOR NOW TO SAVE BATTERY. FASTBOOT WILL NOT PROGRAM WITH A LOW BATTERY.
Click to expand...
Click to collapse
Thank you so much. My bf is leaving his laptop here so that i can do this since he is building the main cpu right now. Ill makev sure i let you know if this works or not after ive finished. I was going to have verizon send me a new one since i just bought my D4 on the 17th and i have 14 days. But i just dont want to risk my warrenty getting voided. Once again thank you.

Briteyez83 said:
Thank you so much. My bf is leaving his laptop here so that i can do this since he is building the main cpu right now. Ill makev sure i let you know if this works or not after ive finished. I was going to have verizon send me a new one since i just bought my D4 on the 17th and i have 14 days. But i just dont want to risk my warrenty getting voided. Once again thank you.
Click to expand...
Click to collapse
If it works, I'll create a new thread with the instructions as I believe there are a few in your situation.

Yes there is quite a few. Ill let you know as soon as i can

[Q] LG Thrill GB w/ClockworkMod Recovery

(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick

Rick Tillery said:
(Obvious Noob warning---) A friend helped me root my Thrill, install ClockworkMod Recovery, and then install CM7 on my Thrill. But I would like to try the LG GB release. Is it necessary to backtrack all the way back to stock to do this (i.e. reinstall the stock ROM, reinstall the stock recovery, unroot, etc.)?
My friend tried using the LG upgrade tool on his LG phone without going back to stock and ended up bricking it. He says that usually within a few days of release, a CMR compatible zip file (usually already rooted) appears here on XDA (I haven't seen it), which makes things easier (but obviously he didn't wait for it himself).
Will a zip be possible for the Thrill GB? (The file seems quite large (420MB), so I'm guessing there is a lot of media included.) Or should I just bite the bullet and backtrack?
Rick
Click to expand...
Click to collapse
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD

The Dark Lestat said:
I'm assuming that the official update method was used.
Just use this method after downloading the update. No bricking.
SEE THREAD
Click to expand...
Click to collapse
Thank you for your help!
Rick

Trojan?
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick

There is no virus, Lestat would never do that
Sent from my LG-P925 using XDA

Just my .02 .....Get rid of Symantec !! They are known for scaring people into a virus frenzy.. Yes, it is possible that it is seeing it as a potential virus because shttp is a workaround from the usual porting of windows ip services. ...
Correct me if i'm wrong somebody please !!
Get yourself Comodo and save your money...
Regards,
Dwayne
PS: somebody on here has written a script that just uses shttp temporarily while
your doing the flash procedure, and then reverts your host files back automatically after your done. You should try it.

dwaynedman said:
Just my .02 .....Get rid of Symantec !!
Click to expand...
Click to collapse
Symantec isn't really a choice on work PC.
Get yourself Comodo and save your money...
Click to expand...
Click to collapse
I'm sorry I can't give the link yet, but if you'll Google you'll see Comodo classifies shttp3.exe as "ApplicUnwnt.Win32.ServerWeb.SmallHTTP.~A" or "UnclassifiedMalware" (I guess depending on the version). A number of scanners find issues with shttp3.exe. I'm not saying it is infected, only that it is doing something suspicious.
Rick

Rick Tillery said:
Sorry, but as a noob, I can't post in that other thread.
It seems that the shttp3.exe in the LG Flash Package triggers Symantec's trojan detection. Some searching seems to indicate (assuming I'm reading all the cryptic virus sites correctly) that there is something to this, although it seems that different scanners find different trojans/viruses (can't post the link, but Google for "shttp3.exe" and "trojan"). I also found that the web site for this utility is blocked at work, because it's a "malicious site."
Has anyone seen this? Has anyone been able to verify/refute this?
Rick
Click to expand...
Click to collapse
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.

Back to square one
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick

The Dark Lestat said:
shttp3.exe is in no way a virus. I've scanned with AVG and MalwareBytes Anti-Malware and they check out good.
Click to expand...
Click to collapse
Thank you, sir. I hope it didn't seem accusing.
Rick

Rick Tillery said:
Thank you, sir. I hope it didn't seem accusing.
Rick
Click to expand...
Click to collapse
It's cool, my friend.
Sent from my Samsung Galaxy S II w/ CM9

Rick Tillery said:
OK, I seem to be stuck.
With paranoia in tow, I decided to take the long way back to stock. Unfortunately, when I tried to restore the backup of my stock image I made to SD card after installing CMR, the md5 checksum failed. I'm not sure what I can do about this.
So ok, I tried following the above link. The first step is to ensure the su binary is up-to-date. But when I tried this, I get a failure downloading the manifest. This is true for WiFi and HSPA+. I Googled and found a suggestion to delete the su binary. But that didn't help (I'm not sure how it would have helped anyway).
So back to the original question. Can I use the LG upgrade process to upgrade without going backwards (as you can see above, I can't) without bricking the phone? Can I start at step 3 in the link above and succeed?
Rick
Click to expand...
Click to collapse
Is it safe to ignore the su version update?
Short of this, can I override the MD5 checksum? I realize that image could be corrupt, but if I'm just going to replace it with the GB release, does that matter?
Rick

You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne

dwaynedman said:
You should just put your phone in recovery mode and update through the tool
with your IMEI #. It will give you the latest update !
If you need some help on that I think Lestat or somebody has a write-up
on doing this.
Good luck,
Dwayne
Click to expand...
Click to collapse
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick

Rick Tillery said:
Can you be a bit more specific?
1. By "recovery mode," do you mean into ClockworkMod Recovery, or I should revert to stock (I made a copy of it after I rooted the stock ROM, but before I installed CMR)?
2. By "the tool," do you mean the official LGMobile Software Update, or the LG Flash Package referenced in the link above?
3. By "latest update," do you mean the file directly from LG, or the copy (v20p) linked from the link above?
4. If the latter in both previous questions, which set of steps do I need to follow from the above link? Can I do only 3 (LG Flash Tool), or do I need to follow 1 (Recovery Manager), 2 (Returning to Stock), and 3?
My friend had a different LG phone, with ClockworkMod Recover and CM7 installed. He reverted the CM7 to stock, but did not replace CMR with the stock recovery. Then he used the official LG upgrade method and bricked his phone. I'm trying to avoid this.
Are you saying I don't have to worry about this on the LG Thrill 4G? Can I go straight from the current CMR+CM7 configuration to the LG GB release using the official LG process?
If you mean I should use a different process, can you point me to it? As I mentioned, I run into dead-ends using the method linked above. And I'm not even sure whether I should be doing steps 1, 2 and 3, or if I should just use step 3.
Any and all help is appreciated, but I guess I don't understand the shorthand you're using here, so if you could be a bit more specific, I wouldn't feel so lost.
Rick
Click to expand...
Click to collapse
Remove your battery and keep the phone unplugged
Launch the mobile updater tool
Hold the volume+ button plug the phone in and keep holding the volume+ till the computer downloads the drivers your phone is now in download mode
Once the phone is picked up go to customer support on the LG updater tool and click on recovery phone put your imie number in click check (make sure its the right model) an let the updater tool do its job. Once its done flashing launch into recovery volume- plus power plus 3D button do a complete wipe and factory reset and reboot your phone ... you'll lose cwm and root and be back to full stock
Sent from my LG-P925 using XDA

Bricked?
No joy. Following the steps, the upgrade stopped at 6%. Trying a number of times, it eventually forced me to exit the program (no more restarts). Rerunning the updater (and downloading the 420 MB image yet again on a VERY slow connection) I tried again and again, with different combinations of battery and plug order with power and volume buttons, but nothing worked. Checking elsewhere I found some issues had been reported with Windows Vista/7, so I tried on an XP machine. Now the "Start Updating" bar is red (it was always gray with W7). But now when I try to restore (or even update for that matter), it asks for my S/N (it never did that before) and then says it is "no longer able to upgrade." Reading around, it seems this is an indication of the device being bricked.
Rick

It sounds like you are very close to getting it working Rick.
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Should Rick be trying to run LG Updater as administrator ? I didn't, but it might not hurt.
Regards & Luck,
Dwayne

http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Sent from my ****ty supported LG Thrill

dwaynedman said:
It sounds like you are very close to getting it working Rick.
Click to expand...
Click to collapse
I wouldn't have believed you early this morning, but now maybe...
My update did the same thing, looped over and over until it
finally kicked me out. Just plugging and unplugging the phone etc....
And when my update stuck at 6% the last time, i took my battery out and then in real quick and that seemed to work.
Click to expand...
Click to collapse
I tried a bunch of different combinations...none seemed to make the app happy. I finally punted Windows 7 and moved to an XP machine, only to get the "no longer able to update" message. At that point I assumed I was screwed (effectively bricked).
Does the phone still vibrate when you plug the usb cable into it while holding volume..? If it does then I highly doubt that your phone is bricked, just in a semi flashed state....No worries
Click to expand...
Click to collapse
It never really vibrated, but I was able to get back into CMR. Unfortunately NONE of my backups work at all. They all have MD5 checksum failures. I tried a trick I found online and got past that step, only to have it say a failure restoring /system. So much for CMR.
JReeher said:
http://forum.xda-developers.com/showthread.php?p=22417769
Have you tried this yet cause if you can get the LG logo to come up then you can reflash the phone and get it working send a pm to the dark lestat he may be able to team viewer you and help you out
Click to expand...
Click to collapse
Which step? As I mentioned above, I can't even get the first step of the first section (updating the su binary). And if I start at the 3rd section, Symantec prohibits me from using shttp3.exe (I tried to unquarantine it, but it gives a permission error, even as Administrator, when I try to run it), so I'll have to use a different machine.
I was able to reinstall the CM7 3/15 release, so that's something. I was going to restore the stock recovery backup I made, but even that doesn't seem to work. I'm having issue with backups :-(
Rick

i have never been able to restore a backup. i dont know why... but i have tried several times in several different instances.
---------- Post added at 11:56 AM ---------- Previous post was at 11:50 AM ----------
rick tillery, if you want to get your phone back to alive and well i'd suggest doing this:
http://forum.xda-developers.com/showthread.php?t=1558723&page=3
4th post i think

Official Motoblur ICS for the Droid 4 possibly leaked

Just saw this thread at droidforums: http://www.droidforums.net/forum/droid-4-roms/208767-stock-motoblur-ics-droid4.html
Can anyone confirm if this is legit?
EDIT: Removed link to the update file for everyone's safety. This is not an update you want to install. It will take you off the update path and attempting to flash one of the currently available fastboot files will result in a brick.

I pulled the same thing by the cake method earlier today but was afraid to flash a unknown.

I tried, based on the instructions on the page, and as usual, cheesecake won't work for me. I get the "account needed" prompt. I'll try again tomorrow.

Thanks!
I'm downloading it now. I hope this works with Safestrap and I get to keep root. Or at least be able to re-root again. Have to be carefull. Need GSM to work

The day after I sold my T-Mo Sensation, and the day before I get my VZW Droid 4. Looks like the gods have decided not to smite me today.

Booted Safestrap. Flashed stock 215.
Can't update to 219 So no wonder I couldn't update to ICS... Here I go again...

It sounds like a couple of people over on DroidForums HAVE gotten this to load. To paraphrase what hashcode said over there, be very very careful with this guys. There are quite a few Razr owners now stuck outside of the upgrade path and unable to use fastboot to restore after flashing an ICS leak. I think I am going to hold off on this one personally. What I am REALLY hoping to see is some improvements to CM9, AOKP, and Gummy come out of this. Particularly the data issues.

Trying it the Cheesecake way and its downloading. Anyone tried it yet? Curious if Safestrap survived. As long as it works I'll be glad. Hope the different baseband fixed audio over UMTS/HSDPA.

Die Bruine said:
Trying it the Cheesecake way and its downloading. Anyone tried it yet? Curious if Safestrap survived. As long as it works I'll be glad. Hope the different baseband fixed audio over UMTS/HSDPA.
Click to expand...
Click to collapse
You are a brave man Try using OTA RootKeeper. It worked with the last update. I would be very interested to see if it works with the ICS update as well.

Ok guys, I installed it. Voodoo OTA RootKeeper did NOT work for me, and attempting to flash the 6.13.219 fastboot file resulted in a brick.
I would strongly advise not installing this update.

SGMD1 said:
Ok guys, I installed it. Voodoo OTA RootKeeper did NOT work for me, and attempting to flash the 6.13.219 fastboot file resulted in a brick.
I would strongly advise not installing this update.
Click to expand...
Click to collapse
Really sorry to hear that. Thanks so much for the information though. Did you try the .215 fastboot file? I'm guessing the result would be the same but might be worth a shot.

Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
XDA app on XT894

kwyrt said:
Really sorry to hear that. Thanks so much for the information though. Did you try the .215 fastboot file? I'm guessing the result would be the same but might be worth a shot.
Click to expand...
Click to collapse
Downloading .215 as we speak, but I'm not getting my hopes up. No big deal though, VZW is overnighting me a warranty replacement and I've got an old phone I'm using for the day.
EDIT: .215 failed at 6/18 as well.
Die Bruine said:
Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
Click to expand...
Click to collapse
There were a several things with this ICS build that were a bit disappointing (native ICS screenshot function didn't work, no "Charge only" mode when connected via USB to PC) but no root access was the dealbreaker. I knew flashing the .219 file was a risk based on what happened with the RAZR ICS leaks but I just figured I'd be the guinea pig
I had the same problem you did when attempting to install it, so I flashed the clean .219 fastboot file and then the ICS update was successful.

build.prop
Die Bruine said:
Can you tell us why you tried to install the fastboot file? You didn't like ICS or is it because of root priviliges? I've tried like 15 times. It just won't update. So now I temp unrooted, uninstalled Safestrap and hope for the best. Next step woul be to fastboot 219 and try on a fresh clean install. The only thing I can think of is that my build.prop gets in the way. Anyone mind posting a stock .219 build.prop?
XDA app on XT894
Click to expand...
Click to collapse
Here is the build.prop file... it is compressed into a zip archive since .prop cannot be attached.
****EDIT: THIS IS THE .215 build.prop

build.prop 219
rumgool said:
Here is the build.prop file... it is compressed into a zip archive since .prop cannot be attached.
****EDIT: THIS IS THE .215 build.prop
Click to expand...
Click to collapse
Okay... here is the 219 build.prop zipped

You gotta be kidding me pffffff. Those guys at Motorola check eeeeeeverything. Thnaks for the build.prop btw rumgool. But now it hangs on Motorola_XT894....3gp. Unbelievable...
Finally got it going. But like you said, had to flash SBF. That's some pretty scary **** . I'm used to Milestone / Droid 1 flashing and I've flashed a Razr before. This one takes twice as long. So for you wanting to flash SBF, don't be alarmed. It takes a while, a very loooong while.

Question: Why would the update prevent flashing via fastboot? I'm only familiar with SBFs, but the point of those were that no matter how bad things got, you could wipe everything out and start over. Is that no longer the case

GSM working!!!!!!
Yes!!!! audio over 3G GSM!!!!
Finally. Don't know what works and what doesn't. But audio works and you have GSM settings right from the get go. Now I'm gonna eat, then I'm gonna play and after that I'll tell you what I think of it.
Thanks guys!

podspi said:
Question: Why would the update prevent flashing via fastboot? I'm only familiar with SBFs, but the point of those were that no matter how bad things got, you could wipe everything out and start over. Is that no longer the case
Click to expand...
Click to collapse
The new fastboot files are nothing like the old sbf's. Wrong radio, different build number and many other things can cause it to fail. Then your stuck in fastboot mode with a soft brick.
Sent from my DROID4 using Tapatalk

This is a really nice build! I am not at all sorry to have risked being stuck, to be honest.
Everything appears to work very well so far and I am posting from Chrome Beta.
Still looking for the downside...

[Q] Having trouble upgrading to 4.4.2 stock on Verizon

I have a Moto X Developer Edition rooted on Verizon with TWRP 2.6.3.1 and stock Android 4.4 on it. I have been trying to upgrade to 4.4.2 without doing the OTA, and without having to reflash TWRP.
So far, I have been unsuccessful.
I have tried Blur_Version.140.45.5.ghost_verizon.Verizon.en.US.zip (approximate file size 150MB) from multiple sources as all the posts I read keep saying that is what works. I have also tried a ~650MB version I found somewhere. In addition, I tried the upgrade located here: sbf.droid-developers.org/phone.php?device=0 which is called VZW_XT1060_4.4.2-KXA20.16-1.25.2_CFC_1FF.xml.zip (It's the 4.4.2 upgrade listed under Verizon US).
All of these fail. In TWRP, about 2-3 steps after it verified md5, it simply says "Failed" with no explanation as to why.
Here is my question:
How can I upgrade to 4.4.2 without a data wipe, and without having to reflash TWRP?
I have no interest in going to a ROM, I want to stay stock, and if I must, I will reflash the recovery if I have to, but I *really* don't want to.

Flash stock recovery, take the OTA, flash TWRP again.
It's so simple, so painless, so quick and it will not wipe your data.

tcrews said:
Flash stock recovery, take the OTA, flash TWRP again.
It's so simple, so painless, so quick and it will not wipe your data.
Click to expand...
Click to collapse
I was hoping to avoid that (Yep, I really am that lazy...) but that's what I was going to do tonight if I couldn't get my hands on a .zip to flash.
Ironically, I bought the Dev Edition specifically so things like this would be easy.

It is easy.....just need to do it.
I support my sister, her husband and my wife (as well as my own) who all have Moto X's. 2 seconds to flash recovery, however long it takes for the OTA to install and reboot and then 2 seconds to flash TWRP again. Heck...I'd just leave the stock recovery in place since it's not needed if you don't plan on flashing any ROMs. The OTA doesn't even remove root.

tcrews said:
It is easy.....just need to do it.
I support my sister, her husband and my wife (as well as my own) who all have Moto X's. 2 seconds to flash recovery, however long it takes for the OTA to install and reboot and then 2 seconds to flash TWRP again. Heck...I'd just leave the stock recovery in place since it's not needed if you don't plan on flashing any ROMs. The OTA doesn't even remove root.
Click to expand...
Click to collapse
Oh, that last bit is good to know! Well, I think even if it did remove root, getting it back is easy on the DE.
I think you're right though, I probably won't install TWRP again, I specifically got the Moto X because I was tired of messing around with stuff when I all I want is a rooted, stock Android experience.

So, after several hours of messing with this, and thinking the stock recovery had gotten messed up because the instructions I had for getting in to it were wrong, I finally got the OTA installing...
and it fails.
I don't know why, I haven't seen the error (I'm not looking at the phone when it fails).
So... Awesome.

Taegost said:
So, after several hours of messing with this, and thinking the stock recovery had gotten messed up because the instructions I had for getting in to it were wrong, I finally got the OTA installing...
and it fails.
I don't know why, I haven't seen the error (I'm not looking at the phone when it fails).
So... Awesome.
Click to expand...
Click to collapse
Are there files out so you can just flash 4.4.2 with mfastboot? Would be easiest.

kj2112 said:
Are there files out so you can just flash 4.4.2 with mfastboot? Would be easiest.
Click to expand...
Click to collapse
I assume so, but I haven't found any instructions specifically saying how to do that, except for the ones that tell you how to return to stock without using RSD Lite.
Unfortunately, I don't know enough about how all this stuff works to be able to figure out which bits and pieces to put together to get upgraded without wiping my data.
What really pisses me off is that I specifically bought this phone so I wouldn't have issues like this, and here I am...
BTW: The only thing the error says is "Error". That's it, nothing else.

Taegost said:
I assume so, but I haven't found any instructions specifically saying how to do that, except for the ones that tell you how to return to stock without using RSD Lite.
Unfortunately, I don't know enough about how all this stuff works to be able to figure out which bits and pieces to put together to get upgraded without wiping my data.
What really pisses me off is that I specifically bought this phone so I wouldn't have issues like this, and here I am...
BTW: The only thing the error says is "Error". That's it, nothing else.
Click to expand...
Click to collapse
This guide has a return to stock section. It will tell you how to flash the stock firmware.
http://forum.xda-developers.com/showthread.php?t=2603358
Unfortunately the moto x is not a simple phone for tinkering with, like say a nexus, even the dev edition.
It can be easier once you do fully understand everything. Just gotta know what applies to you...meaning mostly the locked versus unlocked methods for everything.
After owning an s2, a moto x and now an n5 (n7 too...but I don't tinker with it really....its a family device) I've come to the mind set that for flashers and rooters.....nothing at all beats owning a nexus. Every other device has some limitations that a nexus won't have.

kj2112 said:
This guide has a return to stock section. It will tell you how to flash the stock firmware.
http://forum.xda-developers.com/showthread.php?t=2603358
Unfortunately the moto x is not a simple phone for tinkering with, like say a nexus, even the dev edition.
It can be easier once you do fully understand everything. Just gotta know what applies to you...meaning mostly the locked versus unlocked methods for everything.
After owning an s2, a moto x and now an n5 (n7 too...but I don't tinker with it really....its a family device) I've come to the mind set that for flashers and rooters.....nothing at all beats owning a nexus. Every other device has some limitations that a nexus won't have.
Click to expand...
Click to collapse
Yeah, that's the page I was talking about when I said I found the full instructions...
I specifically bought this phone because I didn't want to mess around with it like this, I just wanted to root it so I could use Titantium Backup and be done with it... and now I'm stuck at a halfway point.... Again...
I'll probably end up just doing the full wipe and manually flash to 4.4.2 (RSD Lite doesn't see my device... yay), since I have gone from my mute button not working (with 4.2.2), to a really bad echo for whomever I'm talking to when it's on speakerphone (Even when speakerphone is muted... THAT made for a fun conference call...).

Taegost said:
Yeah, that's the page I was talking about when I said I found the full instructions...
I specifically bought this phone because I didn't want to mess around with it like this, I just wanted to root it so I could use Titantium Backup and be done with it... and now I'm stuck at a halfway point.... Again...
I'll probably end up just doing the full wipe and manually flash to 4.4.2 (RSD Lite doesn't see my device... yay), since I have gone from my mute button not working (with 4.2.2), to a really bad echo for whomever I'm talking to when it's on speakerphone (Even when speakerphone is muted... THAT made for a fun conference call...).
Click to expand...
Click to collapse
Flashing stock and rooting on an unlocked Moto x is basically the same as a nexus. It really is simple, once you are familiar with fastboot.
I guess there are toolkits that automate everything....like Samsung's Odin, and there's a few for nexus....but it really doesn't help anyone learn. And that's kinda what this hobby is all about.
But, I am sorry you're having trouble. Not sure what else to add. The guides are there, and they work. Usually. I can't think of anything to add to whats already been said.
Hope it works out for you!

kj2112 said:
Flashing stock and rooting on an unlocked Moto x is basically the same as a nexus. It really is simple, once you are familiar with fastboot.
I guess there are toolkits that automate everything....like Samsung's Odin, and there's a few for nexus....but it really doesn't help anyone learn. And that's kinda what this hobby is all about.
But, I am sorry you're having trouble. Not sure what else to add. The guides are there, and they work. Usually. I can't think of anything to add to whats already been said.
Hope it works out for you!
Click to expand...
Click to collapse
I don't think I'm articulating my issue properly. I understand how to do everything in the guides you mentioned, they're a piece of cake. That doesn't solve my problem.
My problem is that I want to get to 4.4.2 WITHOUT wiping my data, but can't do the update via OTA or flashing in recovery. RSD Lite doesn't work either.
The ONLY option I have available to me is to manually push the update with fastboot, which I can definitely do with the instructions provided... But those instructions require me to wipe my data.
I know it's possible to apply the update with fastboot without requiring me to wipe my data, but I don't know enough about the inner workings to know which steps to skip, and which need to be modified, in order to make that happen.

Taegost said:
I don't think I'm articulating my issue properly. I understand how to do everything in the guides you mentioned, they're a piece of cake. That doesn't solve my problem.
My problem is that I want to get to 4.4.2 WITHOUT wiping my data, but can't do the update via OTA or flashing in recovery. RSD Lite doesn't work either.
The ONLY option I have available to me is to manually push the update with fastboot, which I can definitely do with the instructions provided... But those instructions require me to wipe my data.
I know it's possible to apply the update with fastboot without requiring me to wipe my data, but I don't know enough about the inner workings to know which steps to skip, and which need to be modified, in order to make that happen.
Click to expand...
Click to collapse
It says right at the bottom of the return to stock section in the guide I linked too.....you can skip
Fastboot erase user data
fastboot erase cache
Though if you have any problems after, you might have to do it again and do erase those, before spending time trying to figure out what's wrong.

kj2112 said:
It says right at the bottom of the return to stock section in the guide I linked too.....you can skip
Fastboot erase user data
fastboot erase cache
Though if you have any problems after, you might have to do it again and do erase those, before spending time trying to figure out what's wrong.
Click to expand...
Click to collapse
Wow... Attention to detail -5
Sorry about that, when I looked through that article, I skimmed through and saw that the "Return to Stock" section was (almost) identical to the other instructions I was reading...But I missed that last paragraph when I looked at the link you provided, the directions I was using referenced that article but did not include that last bit...
Thank you for your patients, I feel like a dumbass now *sheepish grin*

Taegost said:
Wow... Attention to detail -5
Sorry about that, when I looked through that article, I skimmed through and saw that the "Return to Stock" section was (almost) identical to the other instructions I was reading...But I missed that last paragraph when I looked at the link you provided, the directions I was using referenced that article but did not include that last bit...
Thank you for your patients, I feel like a dumbass now *sheepish grin*
Click to expand...
Click to collapse
No worries!! .
And sorry, its userdata. My keyboard split the words up.
---------- Post added at 11:16 AM ---------- Previous post was at 11:15 AM ----------
And, you may very well have issues doing that way. But its worth a shot first. If you do have issues, then you can erase those and repeat the process.

if using fastboot/mfastboot, I would still erase cache, as it doesn't touch your data/apps/config.
Another tip, use this mfastboot -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
or you can use RSDlite to flash the SBF, but there is a corresponding line for "erase data"
Two helpful links that will help explain what you saw...
Taking the OTA -> http://mark.cdmaforums.com/MotoX-OTA.html
various ways to Return to stock -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html

kj2112 said:
No worries!! .
And sorry, its userdata. My keyboard split the words up.
---------- Post added at 11:16 AM ---------- Previous post was at 11:15 AM ----------
And, you may very well have issues doing that way. But its worth a shot first. If you do have issues, then you can erase those and repeat the process.
Click to expand...
Click to collapse
Alrighty, well I was able to successfully flash to 4.4.2 using the Fastboot instructions. Flashed TWRP afterwards and got root right back. Now that I know, this won't be a trial in the future (fingers crossed!)
Thanks for your help and patience