I tried to follow the steps from androidandme to set up my phone for screen shots. I got java, got the android sdk and unzipped everything (nothing was installed?), changed the path under advanced settings, dowloaded eclipse (why not) and all that jazz - full 9 yards.
However, when I run ddms.bat in the tools folder and Dalvik comes up it never recognizes my phone. I have tried with the g1 mounted, unmounted, usb debugging on/off (which I also do not know what this means).
Anyone have any thoughts? I did not get any prompts about drivers and I am mounted to my computer.
Read the guides on how to install ADB.
for some reason when i ever i use ddms to take screen shots, i can't just go to take a screenshot, i have to run a logcat first, it will bring up a popup that says "failed!" i then close that and it runs a logcat, after i do that, then i can use it to take a screen shot.
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
s15274n said:
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
Click to expand...
Click to collapse
Sorry if this is not relevant, but I had a ton of trouble until I had the newest jave runtime installed. I never had trouble, got a new laptop at work and had no clue why it would not run. the newest JRE fixed it right up. Maybe not your problem but...
Also I like the program "droid explorer". It has screenshot built in.
EDIT.
I have one more thought...I (always have one more thought) try starting your phone in fastboot (camera and power) then back button when the skaters come up) and see if it asks for drivers then.
s15274n said:
^^ not sure how that matters but I double clicked the adb.exe file, a dos prompt ran a lot of info and disappeared. Also, your signature has a link to SDK 1.5, not 1.6?
Tried DDMS again with no luck.
^ I tried to do a logcat, failed, SS with no luck... again though, the issue is that my phone is not being identified - it would make sense that it would not work if it doesnt even know my phone is hooked up.
Perhaps I will sleep on it as work is in a few hours. I would appreciate any help I can get.
Click to expand...
Click to collapse
adb.exe is a command line application, it doesn't have a GUI. To use an command line app you have to 'cd' to the directory where it's located and enter valid commands. I think you can type 'adb help' for a full list of commands.
Try reinstalling the drivers, it took me a few tries to get it working right on Vista (interestingly no drivers are needed for OS X )
Let me start very basic. Is there any "installing" of the SPK? Or, do I just extract the files? I extracted them and created a directory in PATH like the site said to do.
If there is no installation... are you saying for me to get in dos and just start keying commands, and not using any of the files from the zip?
There is no installation, but EVERYTHING for the sdk is ran in command prompt. Meaning click start, click run, type in cmd, then type cd path/to/your/toolsfolder/ then type adb remount see if it does, if not you NEED TO FOLLOW THE ADB INSTRUCTIONS FOR INSTALLING DRIVERS.
trying to root 2.1 sprint hero, had the patched .6 version but redownloaded the .5 version on my phone, now says 2.27.651.5! Good right? Then I'm trying the regaw method for rooting. Downloaded the sdk, downloaded HTC Sync 2.0.33, downloaded hero-root. Renamed them to C:\android-sdk-windows\tools, went to the command prompt and typed it in. Then I type in adb devices and I get an error: adb not recognized as an internal or external command, operable program or batch file. I've checked debugging, and still get same error. Deleted files and redownloaded everything again and STILL get same error. Any help would be much appreciated
make sure you cd to that directory, or you can click-n-drag adb.exe (adb-windows.exe in some cases) into your CMD promt and type your command after... Little work around for odd computer setups
EDIT - you could also try to append the ".exe" at the end, i.e. >adb.exe devices
Thanks, I gave it a try! Still nothing,
Did you run the setup or did you just download, extract, and then run straight to CMD? try running the setup, don't download anything if you don't want to, and then try again.
I must be an idiot, the folder size is 54.2 mb. I'm at a loss. I will continue trying!!!!
Ok, total noob here! I've been at this for a while now and still can not get adb devices to recognize my phone. Device manager says everything working properly, drivers installed properly. I have searched and searched for an answer and still I can"t find one. Is there something I am doing wrong or have I not set up. All I want to do is root my phone, any answers would be a godsend.
Been having issue trying to get ICS on my Touchpad..
Finally got to the stage where I have WebOS doctored, Full Wiped WebOS.
Now having a issue with the cmd script to kickstart the process.
Coming up saying The system cannot find the file specified?
I have created the folder in Root of touchpad put both moboot and ACMEinstaller in that folder.
What have I done wrong / missed out?
Please help
EDIT: Oops wrong section, Mods please move. Sorry
Before you run the command, copy the AcemInstaller to your novacom path .
So if you're in Windows open a CMD prompt to "C:\Program Files (x86)\HP webOS\SDK\bin", make sure you have AcmeInstaller in that folder, and run:
Code:
novacom boot mem:// < AcmeInstaller
P.S I'm 64bit OS so yours might just be "Program Files."
This may be too simple, but are you trying to use ACMEInstaller or ACMEInstaller2?
You need to use ver 2 for ICS
And Linux Newb, ACMEInstaller does not run from Windows. It's supposed to be on the Touchpad, which is where it needs to run. Novacom is simply the interface from your computer that tells the Touchpad to boot ACMEInstaller2 into memory. No files are transferred between computer and TP during the installation process (that is to say, after you've copied the files to the TP initially)
Jay, can you elaborate more on what your process was? We need some more details, such as:
1. Was the TP in USB flash mode?
2. Are you sure that novacom recognizes the device?
3. What did you name the folder where you placed the files?
Some more info will help us help you.
nickmv said:
This may be too simple, but are you trying to use ACMEInstaller or ACMEInstaller2?
You need to use ver 2 for ICS
And Linux Newb, ACMEInstaller does not run from Windows. It's supposed to be on the Touchpad, which is where it needs to run. Novacom is simply the interface from your computer that tells the Touchpad to boot ACMEInstaller2 into memory. No files are transferred between computer and TP during the installation process (that is to say, after you've copied the files to the TP initially)
Jay, can you elaborate more on what your process was? We need some more details, such as:
1. Was the TP in USB flash mode?
2. Are you sure that novacom recognizes the device?
3. What did you name the folder where you placed the files?
Some more info will help us help you.
Click to expand...
Click to collapse
Nah, LinuxNewb is correct ACMEInstaller file should be in SDK\bin or Palm, inc folder either place will do.There is no need for it on the TP.
ps. a related post is in TP General section now.
Q&A for [TOOLS] Touchpad Toolbox
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I guess I am an idiot because I cannot seem to get 3 downloads that work.
the fat kid said:
i appreciate the quick response, so im throwing in the zip file that says " update-cwm-jcs>>>>>>>>>>>>" along with the "gapps-kk>>>>>>>"
and then unmounting media volume?
again, thank you,.
---------- Post added at 02:47 AM ---------- Previous post was at 02:41 AM ----------
edit: just tried all 3 of the recovery files in the op and it still says same error message. any ideas? should i be renaming this from update-cwm blah blah, to the format that it is saying is accepted such as,
It will recognize as a compatible KitKat/DataMedia ROM files that look like:
cm-11-*-tenderloin.zip or
ev_tenderloin-nightly-2014.??.??.zip or
aokp_tenderloin_kitkat_*.zip
again im throwing the gapps-kk-20140105.zip in the ttinstall folder along with the update-cwm-jcs-dm-tenderloin.zip file and then ejecting the tp selecgint unmount media volume and am still getting the error message.
---------- Post added at 03:22 AM ---------- Previous post was at 02:47 AM ----------
geez im a freakin moron.... i had incompatible zip files... sorry folks for the clutter
all other noobs like me WATCH THE VIDEO TWICE.
thanks again, all of you are awesome and hopefully this makes my touchpad relevant again.
Click to expand...
Click to collapse
Would you be so kind as to tell me the 3 downloads you used because I have tried and tried and no success.
Can the Touchpad Toolbox be updated to so that it will accept GAPPS named pa_gapps-*4.4.4-*.zip instead of pa_gapps-*-4.4.2-*.zip?
Either that or remove or allow to skip the requirement that GAPPS zip must be present to do the "Install Android" selection. I eventually worked around it rejecting by renaming the 4.4.4 to 4.4.2 but it will probably frusturate novice users.
tweak42 said:
Can the Touchpad Toolbox be updated to so that it will accept GAPPS named pa_gapps-*4.4.4-*.zip instead of pa_gapps-*-4.4.2-*.zip?
Either that or remove or allow to skip the requirement that GAPPS zip must be present to do the "Install Android" selection. I eventually worked around it rejecting by renaming the 4.4.4 to 4.4.2 but it will probably frusturate novice users.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54986968&postcount=293
TPtoolbox boot menu volume rocker not work.
Hi, I ran the tptoolbox and boots in to menu, but the volume button up or down does work, neither does pressing home. But home and pwer button will reboot device. I tried many times no response from volume rocker in menu. Please help, thanks.
I have the 4G Hp Touchpad 1.5 ghz, dual core 32 gb.
Anyone know if the charging dock will still work following an android installation?
Also, I will search for compatible rom builds, but do themes work as well? (Not sure why they wouldn't, just checking)
sj
Sent from my gTab3 (SM-T210R) on NoleKat v1.4 using [email protected] HD Mobile Pro
sjsharksfan420 said:
Anyone know if the charging dock will still work following an android installation?
Also, I will search for compatible rom builds, but do themes work as well? (Not sure why they wouldn't, just checking)
sj
Sent from my gTab3 (SM-T210R) on NoleKat v1.4 using [email protected] HD Mobile Pro
Click to expand...
Click to collapse
Yes the Touchstone charging dock works on android...
TP Toolbox failed; I'm OS-less; please help
I'm on a Mac.
I can't figure out how to make tptoolbox work on the Mac.
I went to a frustrated friend with a PC (Windows) who did not allow me enough time to complete my task.
My Touchpad is now OS-less, as in no OS; no WebOS, no Android.
I successfully did a full data wipe, twice. Thus no OS.
I couldn't get past the next step, install Android, on TPToolbox.
I got stimied after trying to copy the three files to the ttinstall folder. It said a proper recovery file was not found.
I followed the steps above to a T. I copied and pasted the three files from the windows batch to the ttinstall.
I realize in those three files there were no gapps, no recovery, no kitkat files.
So I hope I copied the right three.
Anyway, my frustrated impatient friend kicked me out, so I have no access to a PC anymore (just my old faithful Mac); I have a TP without an operating system on it; and I have no idea how to proceed (as I don't know which three files I'm supposed to copy and paste as it seems the ones I did copy and paste weren't the ones and there's no Gapps, no Recovery and no Android KitKat installs anywhere (I thought that would be within the TP Toolbox programme itself.)
Like I said, I clicked on the correct links, I went with JCSullins first link vs. the other two.
So somebody, anybody, write me back if they know either how I can proceed, or if I can just send you my TP and you can do a big favour for a small nobody.
Thanks everybody.
If not, anyone wanna buy a TP with no OS?
I still need help. HELP!
I still need help. Anybody? HELP!!!
vizspace said:
I'm on a Mac.
I can't figure out how to make tptoolbox work on the Mac.
I went to a frustrated friend with a PC (Windows) who did not allow me enough time to complete my task.
My Touchpad is now OS-less, as in no OS; no WebOS, no Android.
I successfully did a full data wipe, twice. Thus no OS.
I couldn't get past the next step, install Android, on TPToolbox.
I got stimied after trying to copy the three files to the ttinstall folder. It said a proper recovery file was not found.
I followed the steps above to a T. I copied and pasted the three files from the windows batch to the ttinstall.
I realize in those three files there were no gapps, no recovery, no kitkat files.
So I hope I copied the right three.
Anyway, my frustrated impatient friend kicked me out, so I have no access to a PC anymore (just my old faithful Mac); I have a TP without an operating system on it; and I have no idea how to proceed (as I don't know which three files I'm supposed to copy and paste as it seems the ones I did copy and paste weren't the ones and there's no Gapps, no Recovery and no Android KitKat installs anywhere (I thought that would be within the TP Toolbox programme itself.)
Like I said, I clicked on the correct links, I went with JCSullins first link vs. the other two.
So somebody, anybody, write me back if they know either how I can proceed, or if I can just send you my TP and you can do a big favour for a small nobody.
Thanks everybody.
If not, anyone wanna buy a TP with no OS?
Click to expand...
Click to collapse
Have you tried to install it using jcsullins recommendation that you use the Linux way with Mac?
Kit Kat working
OK, like the chap above, I moved the wrong three files into the ttinstall folder. I figured that out. It's the way the thread was written, easy to get confused as they have links right below and say it's those, when in fact it is not (a gapps, recovery and rom need to be moved in there, not the data version of android as that link downloads). Anyway, I sorted it out. Just putting closure on that. Thanks JCSullins! Now we need a Mac version so I need not borrow a friends PC laptop.
vizspace said:
I'm on a Mac.
I can't figure out how to make tptoolbox work on the Mac.
I went to a frustrated friend with a PC (Windows) who did not allow me enough time to complete my task.
My Touchpad is now OS-less, as in no OS; no WebOS, no Android.
I successfully did a full data wipe, twice. Thus no OS.
I couldn't get past the next step, install Android, on TPToolbox.
I got stimied after trying to copy the three files to the ttinstall folder. It said a proper recovery file was not found.
I followed the steps above to a T. I copied and pasted the three files from the windows batch to the ttinstall.
I realize in those three files there were no gapps, no recovery, no kitkat files.
So I hope I copied the right three.
Anyway, my frustrated impatient friend kicked me out, so I have no access to a PC anymore (just my old faithful Mac); I have a TP without an operating system on it; and I have no idea how to proceed (as I don't know which three files I'm supposed to copy and paste as it seems the ones I did copy and paste weren't the ones and there's no Gapps, no Recovery and no Android KitKat installs anywhere (I thought that would be within the TP Toolbox programme itself.)
Like I said, I clicked on the correct links, I went with JCSullins first link vs. the other two.
So somebody, anybody, write me back if they know either how I can proceed, or if I can just send you my TP and you can do a big favour for a small nobody.
Thanks everybody.
If not, anyone wanna buy a TP with no OS?
Click to expand...
Click to collapse
vizspace said:
--SNIP--
Now we need a Mac version so I need not borrow a friends PC laptop.
Click to expand...
Click to collapse
Have you tried running the script in terminal as jcsullins suggested?
C) Run the script provided with TPToolbox
Extract the contents of the TPToolbox zip file from above.
Navigate to the tptoolbox_v40 directory that was extracted from the zip.
On Windows, run the batch file named tptb_v40_win.bat
On Linux, run the script named tptb_v40_nix.sh
On Mac, try what I said for Linux and let me know what happens.
Click to expand...
Click to collapse
About the .sh file on a Mac; and, question about transferring files
shumash said:
Have you tried running the script in terminal as jcsullins suggested?
Click to expand...
Click to collapse
Hi Shumash, Thank you for writing and being interactive. Yes I did do as suggested and tried running the .sh (linux) file on my Mac. The file opened with TextWrangler and read:
#!/bin/sh
# This script is Copyright (c) 2014 James Sullins, All rights reserved.
# James (JC) Sullins, aka jcsullins
# No modifications or distribution without permission
TPTB=TPToolbox-2014-05-18-v40.bin
if [ \! -r ${TPTB} ];
then
echo "Cannot find Touchpad Toolbox binary file ${TPTB}"
exit 1
fi
echo "Checking novacom service ..."
novacom -l
rc=$?
if [ $rc -ne 0 ];
then
if [ $rc -eq 1 ];
then
echo "Cannot find novacomd service. Try rebooting or re-installing novacomd"
exit 2
elif [ $rc -eq 127 ];
then
echo "Unable to find novacom program. Try re-installing novacomd"
exit 4
else
echo "Unknown error rc=$rc checking for novacom service. (novacom -l)"
exit 3
fi
fi
echo "Loading TPToolbox ..."
novacom boot mem:// < ${TPTB}
rc=$?
if [ $rc -ne 0 ];
then
if [ $rc -eq 1 ];
then
echo "Cannot connect to Touchpad."
echo "Make sure Touchpad is connected with USB cable."
echo "Make sure Touchpad is in webOS Recovery (bootie) mode."
echo " (where big USB symbol shows on Touchpad screen)"
exit 5
else
echo "Unknown error rc=$rc loading TPToolbox (via novacom boot)."
exit 6
fi
fi
I did a quick search online and found that Macs don't handle the .sh command, rather the command is, believe it or not, .command.
More that that I'm a novice. So I can't say.
And that's when I went to borrow a friend's PC whereupon I double clicked the .win file, extracted it, then ran it in the ensuing window no problem.
--------------------
Now I'm glad someone is reading this thread. I have a question for you (or anyone). Now that I've TP Toolbox'd my HP Touchpad (and I did not select the option to install WebOS on it), how do I transfer files from my Mac (preferred method) to the HP Touchpad now?
I put it in recovery mode (the big USB sign) but it didn't show up on my Mac desktop. It was unrecognized in the Finder too.
So I went back to my friend on hands and knees and am now using TP Toolbox to put an updated file into the ttinstall folder. Is TP Toolbox now the only way to get files on and off my Touchpad? Say it ain't so (and walk me through the process if it ain't so).
There must be an easier way. What am I to do? Please help. Thanks.
vizspace said:
Hi Shumash, Thank you for writing and being interactive. Yes I did do as suggested and tried running the .sh (linux) file on my Mac. The file opened with TextWrangler and read:
--SNIP--
There must be an easier way. What am I to do? Please help. Thanks.
Click to expand...
Click to collapse
From a search on Google (I don't have a Mac):
First in terminal make the script executable by typing:
chmod a+x (yourscriptname)
Then in finder right-click your file and select "Open with" and then "Other...".
Here you select the application you want the file to execute into, in this case it would be Terminal. To be able to select terminal you need to switch from "Recommended Applications" to "All Applications".
NOTE that unless you don't want to associate all files with this extension to be run in terminal you should not have "Always Open With" checked.
After clicking OK you should be able to execute the script by simply double-clicking it.
Click to expand...
Click to collapse
file xfer and mac script
1. How do i xfer files from mac to touchpad and back? Need i use tptoolbox or is there anther way?
2. Second quetion, separate from first...
You wrote:
Quote:
First in terminal make the script executable by typing:
chmod a+x (yourscriptname) wrote:
I dont understand that. What is a script name? Is it my computer name? Other? Where would i find this info?
If my name were viz, and it isn't, would i type
chmod a+x (viz)
(With brackets, as you did)
Or
Chmod a+x viz
(Without the brackets)
Again, what is my scriptname?
3. Is this related to quetion 1? Does yor response suggest all files must niw be xferred using tptoolbox (in the method you described) if im using a mac and that there is no other way to accomlish that task?
vizspace said:
1. How do i xfer files from mac to touchpad and back? Need i use tptoolbox or is there anther way?
2. Second quetion, separate from first...
You wrote:
Quote:
First in terminal make the script executable by typing:
chmod a+x (yourscriptname) wrote:
I dont understand that. What is a script name? Is it my computer name? Other? Where would i find this info?
If my name were viz, and it isn't, would i type
chmod a+x (viz)
(With brackets, as you did)
Or
Chmod a+x viz
(Without the brackets)
Again, what is my scriptname?
3. Is this related to quetion 1? Does yor response suggest all files must niw be xferred using tptoolbox (in the method you described) if im using a mac and that there is no other way to accomlish that task?
Click to expand...
Click to collapse
Google is your friend. Search first, ask second. I'm outta here:
https://www.google.com/?gws_rd=ssl#q=how+to+run+shell+script+mac
vizspace said:
1. How do i xfer files from mac to touchpad and back? Need i use tptoolbox or is there anther way?
2. Second quetion, separate from first...
You wrote:
Quote:
First in terminal make the script executable by typing:
chmod a+x (yourscriptname) wrote:
I dont understand that. What is a script name? Is it my computer name? Other? Where would i find this info?
If my name were viz, and it isn't, would i type
chmod a+x (viz)
(With brackets, as you did)
Or
Chmod a+x viz
(Without the brackets)
Again, what is my scriptname?
3. Is this related to quetion 1? Does yor response suggest all files must niw be xferred using tptoolbox (in the method you described) if im using a mac and that there is no other way to accomlish that task?
Click to expand...
Click to collapse
This link may be of use to you :
https://www.android.com/filetransfer/.
TP Toolbox on a Mac
This system will not allow me to post my questions. It claims I have a URL in my message (which I do not) and won't allow me to post.
Is there another way to contact you?
Another email? Forum? Etc.?
I saved my questions as I can not submit them here.
There's a problem with the XDA forum.
Mac TPToolbox and other juicy issues
shumash said:
Google is your friend. Search first, ask second. I'm outta here:
https://www.google.com/?gws_rd=ssl#q=how+to+run+shell+script+mac
Click to expand...
Click to collapse
shumash said:
Google is your friend. Search first, ask second. I'm outta here:
https://www.google.com/?gws_rd=ssl#q=how+to+run+shell+script+mac
Click to expand...
Click to collapse
Thanks. I followed your link (to google) and read many results. The easiest looking result, which almost worked was this:
shumash said:
Google is your friend. Search first, ask second. I'm outta here:
https://www.google.com/?gws_rd=ssl#q=how+to+run+shell+script+mac
Click to expand...
Click to collapse
it was the fourth result, entitled: "How to run a unix shell script from the Mac Finder"
I followed those instructions.
Terminal opened (launched from the Finder window using their noted technique) and here is what was displayed in Terminal: (please note: I exchanged my computer name from it's real name to ABC and XYZ (for this thread; not my real computer name).
Last login: Fri Oct 24 11:27:14 on ttys000
ABC:~ XYZ$ /Users/XYZ/Downloads/HP\ Touchpad\ Tools/tptoolbox_v40/tptb_v40_nix.command ; exit;
Cannot find Touchpad Toolbox binary file TPToolbox-2014-05-18-v40.bin
logout
[Process completed]
I do see the .bin file in the same folder, the TPToolbox folder, as tptb_v40_nix.sh (which, by the way, I duplicated and changed the extension from .sh to .command, prior to searching in Finder as outlined in above links' description).
So I don't know what to do.
I know a lot of things you likely do not know; but you clearly know more about computers than I. Please be patient and explain succinctly.
I tried your method, first replied from , with and without brackets, that didn't help.
--------------------------------------------------------------
Regarding Android File Transfer, and I thank the contributor below for chiming in with that advice, I've used that, but it only works sometimes. It is not reliable; and doesn't see ALL the files (as a WebOS USB connection to my Mac used to).
Is there some way to put the HP Touchpad into USB mode and connect it to my Mac (like I used to before on the HP WebOS side (when I had an HP WebOS side)? This may be argument enough to keep the WebOS side. (I can put it in USB mode on Android, but the Mac does not recognize the HP Touchpad at all doing it that way).
---------------------------------------------------------------
Another unrelated question: What ever happened to PreWare? I can't find it anywhere. I installed Jason Robitaille's WebOS QuickInstall 4.5.0 and ran it ok. But when one clicks on the globe, there's no Preware. When one clicks on the Search field , there are zero results (except themes). No Applications, Kernels, Patches, etc.. Nothing. So what ever happened to Preware?
Not having been able to find that, and with Palm no longer supporting WebOS at all after Jan 15, 2015, was the nail in the coffin for WebOS for me. If I can't find Preware and all the apps and tweaks that come along with it, the only reason I can see keeping any WebOS on this tablet at all is to be able to put it in to WebOS USB mode and easily connect it to my Mac.
-----------------------------------------------------------
Lastly, I'm running JCSullins build titled/dated: cm-11-20141002-SNAPSHOT-jcsullins-tenderloin.zip
How do I take a screenshot with this ROM? It used to be Power button and lower volume button, but that screenshot option is no longer available in this JCSullins build, nor in the previous build: cm-11-20140625-SNAPSHOT-jcsullins-tenderloin.zip
Any ideas how to take a screenshot?
---------- Post added at 02:59 PM ---------- Previous post was at 02:43 PM ----------
sstar said:
This link may be of use to you :
https://www.android.com/filetransfer/.
Click to expand...
Click to collapse
Regarding Android File Transfer, and I thank the contributor below for chiming in with that advice, I've used that, but it only works sometimes. It is not reliable; and doesn't see ALL the files (as a WebOS USB connection to my Mac used to).
Is there some way to put the HP Touchpad into USB mode and connect it to my Mac (like I used to before on the HP WebOS side (when I had an HP WebOS side)? This may be argument enough to keep the WebOS side. (I can put it in USB mode on Android, but the Mac does not recognize the HP Touchpad at all doing it that way).
---------------------------------------------------------------
Another unrelated question: What ever happened to PreWare? I can't find it anywhere. I installed Jason Robitaille's WebOS QuickInstall 4.5.0 and ran it ok. But when one clicks on the globe, there's no Preware. When one clicks on the Search field , there are zero results (except themes). No Applications, Kernels, Patches, etc.. Nothing. So what ever happened to Preware?
Not having been able to find that, and with Palm no longer supporting WebOS at all after Jan 15, 2015, was the nail in the coffin for WebOS for me. If I can't find Preware and all the apps and tweaks that come along with it, the only reason I can see keeping any WebOS on this tablet at all is to be able to put it in to WebOS USB mode and easily connect it to my Mac.
vizspace said:
--SNIP--
Last login: Fri Oct 24 11:27:14 on ttys000
ABC:~ XYZ$ /Users/XYZ/Downloads/HP\ Touchpad\ Tools/tptoolbox_v40/tptb_v40_nix.command ; exit;
Cannot find Touchpad Toolbox binary file TPToolbox-2014-05-18-v40.bin
logout
[Process completed]
I do see the .bin file in the same folder, the TPToolbox folder, as tptb_v40_nix.sh (which, by the way, I duplicated and changed the extension from .sh to .command, prior to searching in Finder as outlined in above links' description).
So I don't know what to do.
--SNIP--]
.
Click to expand...
Click to collapse
My guess is that executing the shell script by double-clicking starts it in the wrong directory. Open a terminal in the directory where you have the Toolbox files and execute it from the command line there.