Hello,
The OTG technology ( On The Go / USB Host ) works with the LG Optimus 4X ?
Thanks.
OTG work all ICS. But it not work on 4xHD.
Will root enable it?
monthirut said:
OTG work all ICS. But it not work on 4xHD.
Click to expand...
Click to collapse
Why !?
can be the root we can activate the OTG, as was done for the HTC One X (EternityProject Kernel) and the Nexus S! (stickmoun)
you think the update to Android 4.1 will add the USB Host?
USB OTG really a no go for the O4X?
i've just got off the phone with LG uk, they told me that the phone has usb host support but it's on the phones with ics not gingerbread.
can anyone confirm this?
mabz2k said:
i've just got off the phone with LG uk, they told me that the phone has usb host support but it's on the phones with ics not gingerbread.
can anyone confirm this?
Click to expand...
Click to collapse
There are no O4X phones with gingerbread at all...
the person I talked to said they used gingerbread on it, I'm guessing it was an Early version. But if it has ics on it and usb host doesn't work I'd complain to them. Obviously make sure i am using the correct cable before hand so it's not user error.
if i can get this phone once it's released in the UK I'll probably try this out.
Cable is connected and it does not work. Unfortunately, no device is detected. The device is rooted. Somebody news?
antiself said:
Cable is connected and it does not work. Unfortunately, no device is detected. The device is rooted. Somebody news?
Click to expand...
Click to collapse
OTG is not enabled in the kernel. This feature is not compilable as a module as far as I know, and hence the bootloader is locked, we cannot use a custom kernel (kexec is also disabled).
already root my LG Optimus 4X HD still no hope using OTG
little dissapoint in here
someone have solution ?
nolimit88 said:
already root my LG Optimus 4X HD still no hope using OTG
little dissapoint in here
someone have solution ?
Click to expand...
Click to collapse
Rooting alone will not magically enable OTG. Rooting your phone but not doing anything else doesn't make any difference besides voiding your warranty.
L2Deliver said:
Rooting alone will not magically enable OTG. Rooting your phone but not doing anything else doesn't make any difference besides voiding your warranty.
Click to expand...
Click to collapse
Rooting your phone does NOT void your warranty. It is a simple matter to unroot if you need to send the phone back for repairs - and if it is so badly screwed that you can't unroot it then it is highly unlikely the service centre would be able to tell that you had rooted it in the first place.
Messing around with your bootloader, using an XTC-Clip to gain S-Off (as I had to do with my old HTC DS) and stuff like that, however, does run the risk of voiding your warranty - but even then they cannot refuse to fix a genuine hardware problem unless they can prove you caused it by your actions.
Hey guys,maybe you can try this step :
1.root your HH
2.install "android terminal emulator"
3.when it's asked...choose 'grant'
4.enjoy
Thats all
Sent from my LG-P880 using xda app-developers app
ChanixHadez said:
Hey guys,maybe you can try this step :
1.root your HH
2.install "android terminal emulator"
3.when it's asked...choose 'grant'
4.enjoy
Thats all
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Can you elaborate mate, on what this is and what it does?
Feregorn said:
Can you elaborate mate, on wha this is and what it does?
Click to expand...
Click to collapse
It achieves nothing. This guy appears (I may be wrong) to simply be spamming to try and make himself look intelligent - yet he doesn't know the difference between odexed & de-odexed. I would be tempted to ignore anything he posts until he can be verified as trustworthy.
SimonTS said:
It achieves nothing. This guy appears (I may be wrong) to simply be spamming to try and make himself look intelligent - yet he doesn't know the difference between odexed & de-odexed. I would be tempted to ignore anything he posts until he can be verified as trustworthy.
Click to expand...
Click to collapse
I don't know if you're right or, if you're right... probably you're right.
Hi guys
my cell phone's (usb otg) doesn't work too ((optimus 4x hd))
it's not possible
i connected a mouse but it didn't work correctly
the other android phones can work with mouse and keyboard without any problem
but in 4x when i'm connecting any hardware it doesn't happen any things
i installed usb storage manager and usb host controller but they didn't work
at the first i thought my usb otg cable broken
what about you ?
This needs a newer kernel, so with version 2.6.x it won't work.
Related
Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance
strange
Jouzofski said:
Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance
Click to expand...
Click to collapse
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.
alekthefirst said:
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.
Click to expand...
Click to collapse
well I know...there is no answer over the google either...no one has this kind of problem
I will keep searching
Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.
muellersmattes said:
Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.
Click to expand...
Click to collapse
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942
Jouzofski said:
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942
Click to expand...
Click to collapse
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!
RuedasLocas said:
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!
Click to expand...
Click to collapse
I did everything as in the tutorial...but I stopped at step 8...
I am using win 7, 64 bit edition and I connected to my laptop win xp 32 bit edition, I manage to install everything, but when I connect phone (vol up and usb cable) the computer never finds omap4430...when I look at device manager i get a new hardware for about 3 seconds and then everything dissapears...
I don't undestrand...
does it maybe has to be win 7 and 32 bit operational system or something else...
tnx anyway
Jouzofski said:
Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
Click to expand...
Click to collapse
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone
blumenkasten said:
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone
Click to expand...
Click to collapse
I just tried it but no helpo for me here...thanks anyway
Jouzofski said:
I just tried it but no helpo for me here...thanks anyway
Click to expand...
Click to collapse
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck
RuedasLocas said:
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck
Click to expand...
Click to collapse
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...
Jouzofski said:
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...
Click to expand...
Click to collapse
Maybe even without sucess, when you flash by the "development way" (let's call it like that for now...), you overwrite the file system allowing to perform the normal flash after that.
Good for you.
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
SREEPRAJAY said:
Maybe the issue is the cable mate.'......try to change it.
Hope it helps
O2X with Magical ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I already done this but the usb won't work and the same cable works with another p990. :crying:
torq1337 said:
Hm... Tell us something more about the ROM, baseband and everything you have now on it ?
Click to expand...
Click to collapse
At the moment with Gueste2X_GoodBye-2.0 + gestekrnl 2.1 without oc, baseband 0725.
Did you try to switch mode? From "mass storage" to "mtp"?
amagyar said:
Did you try to switch mode? From "mass storage" to "mtp"?
Click to expand...
Click to collapse
No. How can i try this?
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
Can't enter into this menu usb-connection(pc) when i press menu button nothing happens.. I think we are in the same boat because my phone can't be recognized in apx mode/ sw mode ..
Iconoclasm said:
go to Settings->Storage-> hit the menu button -> USB-Connection(PC) -> choose between the options.
Actually I'm having the same issue. But I'm really sure my USB port is broken.
The device just isn't recognizing that it is being plugged into something.
(And I tried everything anyone ever reccomended on the USB not working matter)
I just use a cardreader to put stuff on my SDcard. I just hope I never have to repair my device via NVFlash. That's impossible now.
Other than that it's not a big deal for non-devs
Click to expand...
Click to collapse
The same is happening with my p990 to. I can´t connect to pc with pc connection. To transfer data i use the card reader or with airdroid who it make with wifi.
Others users that had this problem they sent the phone in warranty and Lg have changed their mainboards. So if you have warranty go and solve your problem with your LG shop. It´s seems that is not any solution to solve this annoying problem with this bad hardware
Hello, same problem here. Well, "you need to send it to LG".. but there's one problem. I have MIUI and I can't flash back original ROM without nvflash. How to deal with it?
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
SuperSkill said:
Try this: open LG update tool > options > "?recover (phone)? " > do by imei > enter serial and imei. LG update tool checks baseband for updates, for recovery idk, but I guess recovery cm only needs the numbers entered. Worth a try, and I'd like to know too.... Thanks Ferrum Master, you made me know about this function
Click to expand...
Click to collapse
well at mine don´t works. thank you very much for you solution.
I have the same problem. It's not possible to connect to the phone either by LG tool or as mass storage. I've tried different cables, computers and cleaning the connector in the phone without success. I'm running stock GB.
I would really like to root the phone to be able to flash CM10. Is there any way to do this without USB connection?
Edit: I've already tried NVFlash and SuperOneClick
I had the same problem last weeked and i manage to solve it, im busy right now but I promise i'll tell you how i solved it later today or tomorrow
Sent from my Optimus 2X using xda app-developers app
Nardocf said:
Hi there,
I need some help here..my p990 usb only charges when connect to pc or playstation 3. I know it isn't a driver problem because i have already tested other two p990 at my pc and both devices are recognized/usb work.
I've tried smartflash/nvflash but the device can't be recognized by windows..
So, can i assume the usb hardware is dead :crying:? any tip for fixing this matter ?
Thanks in advance,
Click to expand...
Click to collapse
Hey hello, I wrote yesterday and told you that I would teach you how to fix this bug, I'm almost done with the tutorial, I had to make all over again so I could tell you step by step, unfortunately, the fix I found is temporal, so, I'm trying one more thing to see if I can make it permanent, and also, i'm wating for Hulk to answer me where to post this fix, 'cuz you're not the only one with this problem, so I think would be better to create a thread with my solution, i'm sorry if I could not give you the instruccions today but I think later today or tomorrow hulk will tell me where to put it, as soon as I post the solution, I'll post here a link to the thread, just wait a bit more
greetings
I just posted my solution, you might want to give it a shot
Look here
http://forum.xda-developers.com/showthread.php?p=33870935#post33870935
I know P990, SU660 and SU880 can't be bricked tanks to nvflash. I am wondering is there any other phone which are as much unbrickable as the above mentioned phones.
Sent from my LG-P990 using xda app-developers app
You can use nvflash with every tegra devices...
You almost right, but optimus 4x can't be used with nvflasn because it has secure boot key and without the key you can't use nvflash, sadly . There is htc one x as well, but if you enter in to apx mode you can't come out of it. The only devices which has working nvflash like our p990 is asus's tegra tablets.
Actually, I am looking for my next phone, becase optimus 2x is getting old. Since I love experiment with phones I possible will brick my new phone. That's why I am looking for unbrckeable phones. asus tablets are unbreckable but they are not phones
Sent from my LG-P990 using xda app-developers app
Yeah I'm also looking for a newer unbrickable phone..
What about qualcomm processor's phones ? Does anyone knows if they are easy to hardbrick and if they have an equivalent of Nvflash ?
well If you have qualcomm phone and your partition layout get messed up during a bad flash you hardbricked your phone. Unbricking qualcomm phone is realy hard. You need special hardwares and softwares which you have to buy and you have to disassemble the phone completly then you can unbrick hardbricked qualcomm phone.
The LG Nexus 4..???
tryin said:
The LG Nexus 4..???
Click to expand...
Click to collapse
I don't really know what you mean by ''lg nexus 4..??''
nexus 4 is a great phone and it is true that it is unbrickeable if you have a riff box. I think it is hard to brick any android phone. If everything goes right. I mean that you don't flash galaxy s4 cm rom to nexus 4, or your computer dont get bluescreen during flashing rom, or the electricity from the house don't go out during flashing rom.
If the bootloader and the partition layout don't get damaged you are fine. CWM is always there for you and the flashing tools. But if the bootloader or partition layoutn damaged you are in a big problem
We are lucky with our p990 or su660 because we don't need any special hardware like riff box or spending 20$ to a unknown guy, who probably has a riffbox, to unbrick the hardbricked phone.
Sent from my LG-P990 using xda app-developers app
That's one of the reasons I bought the o2x.
Whatever happens, nvflash is there for you. I hope more phones will get this kind of options, this way people don't get afraid to flash roms, because everything that goes wrong can be easily fixed.
Sent from my LG-P990 using xda app-developers app
bitdomo said:
I don't really know what you mean by ''lg nexus 4..??''
Click to expand...
Click to collapse
I mean that nexus 4 is made in partnership with LG... .
Even so, thanks for your explanation, i didn't think it was so hard to work with any other kind of smartphone that is not O2x.
Are u sure that we can't use nvflash with any others tegra phone?
tryin said:
I mean that nexus 4 is made in partnership with LG... .
Even so, thanks for your explanation, i didn't think it was so hard to work with any other kind of smartphone that is not O2x.
Are u sure that we can't use nvflash with any others tegra phone?
Click to expand...
Click to collapse
I can't be 100% sure unless I try myself, but as I read the post about htc one x and optimus 4x it looks like they can't use it, or if they even try, then things are just getting worse.
Maybe nexus 7 has working nvflash. I was reading topics about that. So they were able to read back partitions with nvflash, but there is no nvflash rom for nexus 7 like to our optimus 2x nvflash rom. I don't know why. Maybe nexus 7 owners don't know how to do that, or it is not possible. Sadly nexus 7 is a tablet and not aphone
I think "unbrickable" can apply to most new Android phones out there as long as there is an unbricking tool released (i.e. kdz flasher for LGs).
As long as your power button, volume buttons, and USB port are still working, it's more or less guaranteed you can recover from a bad flash. If any one of those break (especially the USB port), then even NVFlash won't save you!
machoman1337 said:
I think "unbrickable" can apply to most new Android phones out there as long as there is an unbricking tool released (i.e. kdz flasher for LGs).
As long as your power button, volume buttons, and USB port are still working, it's more or less guaranteed you can recover from a bad flash. If any one of those break (especially the USB port), then even NVFlash won't save you!
Click to expand...
Click to collapse
I think most of xperia phones are unbrickable with ulocked bootloader..I thought i have bricked my z1 when i restored ta partition on custom rom with custom kernel and phone wont boot no recovery either then i just used flashtool and reflashed stock rom with reseting customization and saved my xperia phone..And i think only way to brick xperia is to flash rom with sony PC companion on unlocked bootloader
Hi everyone,
I would use my mouse/usb key on my HTC desire 510. If i understood after my researches,that's not possible on all smartphone...
So, is that possible on our HTC ?
Thanks for your future answers !
yes our stock kernel supports usb otg, as well as supplying power out. i use a 32gb sandisk usb flash drive with my 510.
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
alain21218 said:
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
Click to expand...
Click to collapse
It shouldn't be much of an issue. It does that for me too but still works, do any other errors present themselves?
Sent from my XT1028 using XDA Free mobile app
Well, i just plug the otg in my phone, without other usb. It show me "Phone in USB host". I tried with OTG checker, my kernel is ok but no signal detected by the application.
I tried to turn off the phone, & remove the battery, then put in again & turn on. When i plug in the OTG, nothing appened for a moment then the cursor of the mouse that i connected in the OTG appear for just 1 second, like a flash & the message back again.
No other problems
Today i tried to make my own OTG usb to see if the problem is the phone or the OTG hama.
When i plug my own OTG usb, nothing happen. When i plug the other OTG i just get the same message i said in my previous answers, nothing else happen.
Any idea ? I don't know but is anything i have to do like turn ON USB debug or anything else ?
Edit: I got a Xperia today to try my OTG, it seems that he works well so i just need to ask: Is the HTC desire 510 64bits EU is compatible OTG ? If it is, why my phone don't recognised my OTG ?
Still need some answers here
It just not support USB HID over USB (mouse and keyboard). Could've been disabled by HTC (reason for cursor disappearing after 1 sec of plugging in).
Sent from my XT1028 using XDA Free mobile app
Hi ! Sorry for insisting but i read on official htc web site that the htc desire 510 support usb storage. So, why nothing else that the previous message happen.
I bought another OTG today & it's forever the same...
I want to bump this topic, I have european 64-bit version and when I connect OTG cable there's info shown about phone being in usb host mode but nothing else is happening.
My thought is that tey give this option to 32-bit US version and then disable it (clumsy) in european version.
Sorry for grammar, english is not my native language.
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
undeadking said:
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
Click to expand...
Click to collapse
I have two cables, both work great wirh other devices .
Hi,Have u already fix ur desire 510 problems?
I already changed 3 different otg cables, seems like the same problem as u met....Any suggestions?
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
USB OTG pops up a message in the notifications bar to let you know that you cannot simultaneously charge your device and utilise an USB device. The only reason that I can think of why the mouse cursor would disappear after a second is because you have your finger on the screen. I use my OTG with my digital camera (via Google Photos), USB Keyboard, USB Mouse, another Android device, and a 64GB flash drive almost daily, and I don't seem to have any problems.
Hello,can you please explain the details for that?
Crutchie46 said:
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
healthybanian said:
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
Click to expand...
Click to collapse
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
MrMike2182 said:
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
Click to expand...
Click to collapse
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
healthybanian said:
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
Click to expand...
Click to collapse
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
MrMike2182 said:
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
Click to expand...
Click to collapse
Australia...probably it was ordered from USA , I will ask the one who ordered this phone,,,Thanks for your help
So here is what I know, an attempt was made to update my G2 by someone other than myself. It now has a black screen and no recovery, it has also been attempted to be repaired by the same person. My pc no longer sees my phone, no download mode or anything else. Is there any hope for this device?
Well, any thoughts from the vast knowledge pooled on here?
godzilla61 said:
Well, any thoughts from the vast knowledge pooled on here?
Click to expand...
Click to collapse
Power on? Anything?
Sent from my Nexus 6 using XDA Free mobile app
31ken31 said:
Power on? Anything?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Downlad and run SRKtool_2.1_droidth with the correct drives.. All will be well again..
tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
godzilla61 said:
tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
Click to expand...
Click to collapse
When you start it pick #4 fixed then #5 unbrick.. You must have had USB Debugging mode Enable prior to bricking.. Also check device manager in windows and check ports.. Will try to help you the best I can, had the same issue 3 days after getting the phone.. If you get it to work after use th Lg program and do fix phone or you will have a lot of issues.
No JOY,
hankbizzo5 said:
When you start it pick #4 fixed then #5 unbrick.. You must have had USB Debugging mode Enable prior to bricking.. Also check device manager in windows and check ports.. Will try to help you the best I can, had the same issue 3 days after getting the phone.. If you get it to work after use th Lg program and do fix phone or you will have a lot of issues.
Click to expand...
Click to collapse
The problem I'm running into is there isn't a bunch of disks shown, only the fixed disks in my comp. So nothing is being seen or they are not there to see.
godzilla61 said:
The problem I'm running into is there isn't a bunch of disks shown, only the fixed disks in my comp. So nothing is being seen or they are not there to see.
Click to expand...
Click to collapse
That is what should happen.. You need the qhsusb QUALCOMM DRIVER..
it is seen as that and on com 7, tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
Well, I guess it's dead if no one else has any suggestions....... what a shame I really liked this device.
godzilla61 said:
So here is what I know, an attempt was made to update my G2 by someone other than myself. It now has a black screen and no recovery, it has also been attempted to be repaired by the same person. My pc no longer sees my phone, no download mode or anything else. Is there any hope for this device?
Click to expand...
Click to collapse
Does your phone boot? Does it charges?
yes it charges. no it does not boot.
godzilla61 said:
yes it charges. no it does not boot.
Click to expand...
Click to collapse
I have the VS980 (Verizon version) and I was completely...and I mean completely dead (due to my own mistake) , no charge, no power, no download mode, no led, nothing at all. I had a full on 100% brick sitting on my desk. BUT.....I went here, http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 and was able to bring it back to life. Now yes you do have to open the device and mess with inside parts but i was able to get mine going. The guide here is for the other models (specifically not the vs980) but I was able to finagle the inside parts to make it work the way I needed to. From there I was able to boot back up and i flashed all the way back to 10B and just OTA back up to lollipop and root again and install TWRP and I'm back up to where I was a few weeks ago, of course I lost everything (texts,photos) in the process but I am back up and running and I am happy I was able to pull that off thanks to the great folks who figure all this stuff up for us.
So I would say go for it and try it, or if not I could do it for you, and if not I'm am surely positive that someone here can help you figure it out with your current situation. Cheers.
PS, if you dont want to mess with it, just let me have it LOL!