Related
Ok i know and have seen that there are many experienced users in this forum, so i give you this!!Pls help sum1!!!
I think i bricked my fone, tried to get cwm 3 on it, then while rebooting, it wont reboot. went into download mode with odin (3 button fix) (i have done this 9-10 times before, not a noob to this), selected pit and tar and hit start. odin stuck on factoryfs and fully orange screen on fone. removed battery, fone, usb, odin restart, tried again, yellow screen. again. red screen. now got frustrated. tried normal odin(not the 3 button fix), again yellow screen.took out battery to try again, but fone wont start/go in dl/recvry mode anymore. tried on 2 different comps with xp/win7. no go.
SCREWED??
BTW, i ordered a jig.should arrive by end of week.
It'll be fine after you get your jig.
Sent from my SAMSUNG-SGH-I897
same thing happened to me...but i just got it replaced..as there was no way i could wake it up...but try Jig..or just get it replaced...every captivate is under warranty...tell them u were doing official Froyo update and lost electricity or something....
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Its a semi uncommon problem.I have had the random colored screens before and had to pull battery. Managed to get odin to work after a couple of times
Sent from my SAMSUNG-SGH-I897 using XDA App
psycho2097 said:
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Click to expand...
Click to collapse
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
viny2cool said:
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
Click to expand...
Click to collapse
YEA, I THOT SO 2... JUZ WANTED 2 VERIFY, WAT ABOUT WEN CHANGING ROMS?do i need to flash to stock every time, or can i just take a backup f froyo stock using cwm?(sorry 4 the caps...)
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
viny2cool said:
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
If u flash any zip from stock froyo it gives you sign verification error. So u need to fix that a nd than just flash custom rom as u normally do
Sent from my SGH-I897 using XDA Premium App
Crash N Burn....Owch!
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Liv33viL said:
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Click to expand...
Click to collapse
inncidentally i did do a couple of nandroids before "all the **** hit the fan". and i could use it to restore. but how? my fone simply wont turn on, neither go in2 recv/ dl. so how 2 restore???????
all 2.2 have 3e recovery, custom roms built on 2.2 come pre cracked.
here is the 3e recovery fix. http://forum.xda-developers.com/showthread.php?t=909213
it works on all 2.2 stocks with 3e.
if you are rooted using "one click root 1.7" (NOT ODIN ONE CLICK!!!) you dont need adb commands just root explorer to mount and replace file. or use adb to mount and push file. the instructions in the thread have the 2 methods mixed together.
no offence but ignore Liv33viL on this one
Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
Dude, that's just plain wrong. Let each person decide on their own who's advice to take and who's to ignore. It's an open forum and we all have the right to share our knowledge and experience. The focus here should be helping people get the assistance they need, not to diminish someone's credibility based on a personal opinion.
In short, grow up.
Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
ok, but then do u mean my bootloader is not damaged? can it be still repaired by using jig? can i restore nandroid?? but how 2 do so since my fone wont turn on at all?
What happens when you do turn it on- nothing? Or does it hang on the boot screen?
Sent from my SAMSUNG-SGH-I896 using XDA App
I had the very same problem. Your bootloater is boogered up now. I sent mine to an xda member and he fixed it.
Even with a jig I wasn't able to do anything. My phone would go into d/l mode with it but that was all it would do.
I paid $50 to have mine fixed which in my opinion is well worth it. That doesn't include shipping costs. I had connexion2005 fix it for me. He a great guy and does very fast work. It beats buying a new phone.
Hope this helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
All shameless advertising aside, it's worth trying a fix where others give up and pay someone. Through the process of elimination we can determine if you need professional help lol!
Sent from my SAMSUNG-SGH-I896 using XDA App
Thanks guys..will try connexion when the jig fails.
Sent from my SAMSUNG-SGH-I897 using XDA App
N does anybody know what to do, as my newly arrived cappy has a distinctive yellow tint to the screen. Do I call samsung and ask for a new one? Or is there some method to fix it by software?
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey Guys,
I hope this is not a complete repost
I have a samsung Galaxy s i9000 and i installed a custom gingerbread 2.3.4 ROM yesterday, all worked fine, but was unable to receive phone calls so i tried reflashing my phone to see maybe it was installed incorrectly.
Im not able to get into recovery mode but i am able to get into download mode.
So i installed Odin, and a .pit file that someone recommended. earlier i downloaded a .tar file that was compatible with my phone.
Everything went fine and it said it was successful, but im now stuck on a black screen with nothing but download mode.
My question to you is:
What files do i need to download inorder to get it to boot, and then allow me to flash to a gingerbread version on android.
I have a 512.pit file, i just need all the other odds and ends like a PDA, phone, CSC files.
Please please help me.
Thanks you for your time.
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
falcons2 said:
The same thing happened to me I just flashed a stock rom using odin and haven't tried flashing anything else yet
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
hi,
The question is, where did you get your stock ROM from, what files did you use? cause I have no clue what files to use just to get the phone going again.
Thanks thou
I just went to the xda website and found the stock rom forum and then I just picked one and flashed it with odin
Sent from my SGH-T959V using XDA App
try to reflash back with another rom and with .pit dont forget to REPARTITION CHECKED
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=846913
[REF] Stock Firmwares for Samsung Galaxy S I9000 series - Download Only
Sent from my GT-I9000 using Tapatalk
Thanks guys for all your comments, i have successfully flashed and got everything working, yes there is a BUT!!!!
its in a different language, its still in the setup mode, i dont want to do anything unless i know that i can change it.
anyone got a screeny for me of where and what icon to press to select English as my primary language.
Thanks
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
SLYLUX said:
ok i found the problem, i downloaded a arabic/african version of the stock firmware, i wanted to ask, could i install a american or europe version?
or will my network not work.
Thanks
Click to expand...
Click to collapse
im on indonesia (asia) use europa rom
Sent from my GT-I9000 using XDA App
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
minnieman said:
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
Click to expand...
Click to collapse
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
minnieman said:
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
Click to expand...
Click to collapse
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
You said your note came from repair and it was on download mode. I think it was NOT REPAIRED AT ALL. Country or region has nothing to do with manual flashing. You only need region when using kies to update.
Sent from my GT-N7000 using xda app-developers app
minnieman said:
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
Click to expand...
Click to collapse
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
minnieman said:
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
Click to expand...
Click to collapse
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
---------- Post added at 01:22 AM ---------- Previous post was at 12:40 AM ----------
GeoJam3s said:
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
Click to expand...
Click to collapse
Never mind... I got it. I had to update only via Kies. And then from there it pushed my original software. Thanks!
Stuck on Splash Screen. No recovery. Odin not able to flash roms.
sahilarora2003 said:
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
hi guys .. i seem to have messed my phone up when doing the 4.0.4 update
were can i find the files used with Odin to go about fixing my issue?
files for the boot-loader...
as my CWM is corrupt
& the phone will not boot up get as far as the NOTE splash before starting the phone
So your bootloader is ok....
Just get a stock rom and flash with odin.
www.sammobile.com
Enviado desde mi GT-P7500 usando Tapatalk 2
Here you go bud
http://forum.xda-developers.com/showthread.php?t=1424997&highlight=cf+root
*all credits goes to Dr Ketan on that link he created.
@OP
Dont be panic and flash bootloader and pit like stuff
Put your full details here, and follow once some experienced user address it.
friedje said:
So your bootloader is ok....
Just get a stock rom and flash with odin.
Click to expand...
Click to collapse
no my CWM bootloader dose not seem to be working
is there a bootloader i can use in Odin to update via my PC?
then flash from my phones SD card ?
If you are sure
Get it from tools on my signature
Sent from my GT-N7000 using xda premium
this is as far as things get .
please could someone help iv been with out my beloved phone for a few days now
on the phones screen the status bar just hangs
This point to the case of superbrick mate. It has caused damage to your system and maybe also data partition. If you have warranty try to seek help from service center where they will replace mobo. Otherwise only repartition can help revive your phone. Follow the link from dr.ketan tool box in his signature to the guide for revive superbrick note cause by emmc bug. Hope you can make it. Cheers.
Its really bad sign
Hav you ever performed wipe on ics?
Sent from my GT-N7000 using xda premium
i see that i have got the CWM working BUT there seems to be a E: signature verification failed each time
dr.ketan said:
Its really bad sign
Hav you ever performed wipe on ics?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
how do i go about doing that ?
I mean to say, if you have performed it earlier then chances are there your device is bricked
dr.ketan said:
Its really bad sign
Hav you ever performed wipe on ics?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
this is what im getting in CWMR
Damin777 said:
this is what im getting in CWMR
Click to expand...
Click to collapse
You Can Install a 5 File Rom Like ZSLPF then Install Every rom you want
mazmazmaz said:
You Can Install a 5 File Rom Like ZSLPF then Install Every rom you want
Click to expand...
Click to collapse
ILL LET U KNOW IN 30MIN.. U MIGHT BE ON TO SOMETHING HERE :fingers-crossed:
still no further than factoryfs.img
:crying:
Just send it to service centre if you device cover under warranty
If not check toolbox from my signature n find
How to revive note damaged by emmc brick bug.
Sent from my GT-N7000 using xda premium
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
wamaOnline said:
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
Click to expand...
Click to collapse
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
jd1639 said:
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
First was this one sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=XXX&os=1&type=3#firmware[/url]
Then when it didn't work, tried this one
sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=ATT&os=1&type=3#firmware
Sorry for the strange URL format, but seems as anew member I don't get to add URLs yet
orlandoxpolice said:
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Sorry, I meant the cwm recovery was flashed correctly and functioning
Btwi tried the fix permissions suggestion from the similar thread but no luck
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
jd1639 said:
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
It is the Odin version I have used,
One more note now, am not sure if that is normal if not.but after the latest flash ( preceded by a data wipe and format ) I can now see zip file I have placed on sdcard but can't access them for flashing and/or ad new zip files from pc
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried,booted, "SAMASUNG"screen only ( as expected sicne i formatted the system ), then re-flushed the ATT ICS and same output
Am trying to get a new ROM flashed, but when the device powers up [ without me going through the wizard ], i can't write anything to SD from my PC.
Any info around here about flashing CM or AOKP using ODIN for this I957 ?
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
I'm at a loss, you've tried everything that has gotten me beyond the boot screen.
Anyone else have any ideas?
Sent from my SGH-I727
wamaOnline said:
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
Click to expand...
Click to collapse
I should mention something that has gotten me worried, i flashed a TWRP recovery to check if the touch would work there, but it didn't.
Not sure if i should be worried about HW now, or try another TWRP for instance? Or perhaps TWRP shares another flawed tab wide configuration with the Android image ?
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Then why is it still borked when reverting to hc?
Sent from my SAMSUNG-SGH-I727 using xda premium
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
jd1639 said:
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
Click to expand...
Click to collapse
yea i dont get how a rom flash could cause a hardware issue
orlandoxpolice said:
yea i dont get how a rom flash could cause a hardware issue
Click to expand...
Click to collapse
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
wamaOnline said:
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
Click to expand...
Click to collapse
Got it Reassembled and cleaned it and it worked
same prob, touchscreen not responding
wamaOnline said:
Got it Reassembled and cleaned it and it worked
Click to expand...
Click to collapse
I'm having this issue of the touchscreen not responding on my s2 now
You say you got it reassembled? What did you have to do to repair it
any help greatly appreciated
I have JB 4.1.2 and cwm 9.1 flashed
after reboot screen comes on but won't respond to touch, I can only access download and recobvery screens
I also have the phone not showing on computer when usb attached but am loading rom etc to ext sd card first and installing them from cwm
Got the maintenance center to disassemble it, clean the pins and reconnect the screen and then it worked
Sent from my LT26ii using xda app-developers app