Database Develop

[ROM][BETA][AOKP JB][M1/ 4.1.2][11/14/12] Samsung Galaxy Exhibit 4G

This is a port of Android Open Kang Project (AOKP) for the Samsung Galaxy Exhibit (SGH-T679)
There is no gurentee that this will progress beyond its current state however I intend to keep it updated with camcorys updates.
EDIT: as of 120412 I will for sure no longer provide any 4.1 based updates, I'm at work on 4.2 and I'll post it here if I can get a successful boot.
Thanks to...
Camcory
Galaxy W folks
Arco (3.0 kernel)
AOKP
CyanogenMod
Kernel Info
Source
http://github.com/arco/samsung-kernel-msm7x30
What is AOKP?
AOKP is similar to cm10 but with hundreds of themeing and customization options to choose from. The speed of AOKP is slightly faster than CM10 as well. For a full list of these features visit
http://www.aokp.co
[WORKING]
Phone
MMS
SMS
GPS
Bluetooth
Rotation
ROM Control
Status Bar
EDGE, 3G, 4G (DATA)
Theme Manager
SD Card
Internel SD
External_SD
Wifi
Wifi Calling (May not work)
Video Editor
Hardware Acceleration
Speakers
Headphones
Superuser/root
[NOT WORKING]
USB Teathering
Camera
BT Audio
Video Playback is choppy
Emergency Calling [911 Calls]
(The fix to this is have the direct numbers of your local fire and police stations available) if its fixed all pust an update for this
Stuff to Know
Internal SD is mounted as /SD card
Externel SD is mounted as /external_SD
Facebook Sync is not included in AOSP, there are alternatives in the market.
occasional screen flicker - set minimum CPU frequency to 368 or possibly 768 and it should go away
How To Install
Download ClockworkMod Recovery
cwm.6012.t679.zip - 4.16 MB​
Download the AOKP ROM
Mirror 1 aokp_ancora_tmo_unofficial_Nov-14-12.zip - 130.75 MB​
Download Google APPs (Contact Sync,Setup,Play Store, ect.)
Google APPs 07/26/12​
[Flashing]
Hold home and power buttons until the phone reboots and the Samsung logo appears.
The stock recovery should then apear.
make shure cwm recovery is on the internel SD card and from stock recovery flash the zip file (should be easy to figure out)
reboot recovery again
select backup and restore and do a backup.
do a romwipe and then flash AOKP
*flash gapps
*reboot
AOKP is installed now
I would recomend a ROMWIPE if installing over CM9/CM10 but it is not neccicary
ENJOY!!!!

Changelog
2012-11-07
*inital release
2012-11-09
*Added Boot animation
*Fixed bugs
*Synced with aokp sources
*Added Apollo cm10 music player and dsp manager (don't think it works right)
*reverted to 2.6.35.14 kernel due to USB problem and in attempt to get camera working
2012-11-10
* fixes screen flicker (hopefully)
2012-11-14
*definatly fixes screen flicker
Should have dsp and Apollo
Sent from my SGH-T679 using xda app-developers app

I wasnt able to get the first but I got the second post hooray! Cant wait to check it out
Very nice. I love a super slim ROM. Heres some screenies.

Thanks, trying it now!

Wow great . But i still need camera work . I can't flash rom

Awesome to see your still working with AOKP hopefully you will get camera fixed this time around on JB it would be awesome if you did. Anyways instead of complaining, thanks for all the hard work dude!

Great to see all the JellyBean!
going to nandroid my pacman rom and give this one a shot! Really am enjoying all the new roms coming out for this phone! So thank you for the time and effort you put into working on this, the more choices the better! It took awhile, but the Galaxy Exhibit is finally getting the attention it deserves, i mean really, a $200 phone that once rooted and rommed up, can hang in with much higher end phones!!! Time to test lol BTW its about time the Exhibit deserves its own spot in the forums in my opinion! With all the new roms and threads its can be difficult to find all the information about our phone!!!

The galaxy w dev that did aokp has partial camera working. So I'll look into it after school. I also need to put in the official boot animation and the swag papers app doesn't have any wallpapers in it.
Sent from my SGH-T679 using xda app-developers app

Very glad we have a jb AOKP now
Sent from my SGH-T679 using xda app-developers app

Just installed the build. Very nice. I have no big issues so far. Thanks IRX !
Well Im getting some lag now in Google now and when I pull my notification drawer down. I wonder If its the gapps I installed. I installed a modded gapps. But I used the same gapps on cm10. Any suggestions?
Sent from my SGH-T679 using xda app-developers app

Don't have time tonight but I'll check this out tomorrow. You need more traffic in here!
Sent from my SGH-T679 using Tapatalk 2

Flashed yesterday. Really smooth. I also love the customization options!
Sent from my SGH-T679 using xda app-developers app

Nice start. Tested out the ROM and it recognized my external microSD card. Also, it ran very fast and smooth. Keep up the good work!

Today I'll try and apply iattalagys patch for the w camera on jb. Since he designed if for aokp, there's a chance it could work here
Sent from my SGH-T679 using xda app-developers app

My home button and browser won't work. I wiped cache and dalvik and fixing permissions doesn't work.
Sent from my SGH-T679 using xda app-developers app

cmason37 said:
My home button and browser won't work. I wiped cache and dalvik and fixing permissions doesn't work.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Did you do a full wipe before install? My home button and browser work fine. Maybe do a clean install of the aokp and gapps and see if that helps.
Sent from my SGH-T679 using xda app-developers app

I wiped everything. I even enabled the nav bar and home button still didn't work.
Sent from my SGH-T679 using xda app-developers app

cmason37 said:
I wiped everything. I even enabled the nav bar and home button still didn't work.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I have no idea, everything worked fine for me, do a full romwipe fix perm and install cm10, then flash aokp over that? Can't hurt to try
Sent from my SGH-T679 using xda app-developers app

Ooooook... So I love AOKP.... Its really bare bones.... Fairly fast... Smooth Apex with Touchwiz 5 theme and the animations set to Tablet... Now what I don't like is the inability to set my transparency to 16bit and to turn off surface dithering.... Why? It really helped with the notification drawer jerkyness.... That's my only complaint... The drop down is really jerky and choppy.....
That and I'm having problems with Simple Mobile but that's not the ROM's fault... lol
Otherwise... This is a very very fast ROM and I deff prefer this over Pacman.. x3 Excellent just.. This ROM is near perfect.
Sent from my PokeGear running JB AOKP

AkiroX said:
That and I'm having problems with Simple Mobile but that's not the ROM's fault... lol
Sent from my PokeGear running JB AOKP
Click to expand...
Click to collapse
Maybe this would help. Got it from the CM10 thread
AkiroX said:
I was actually having a problem in which my connection kept saying "Cannot establish a secure connection"
I made new APN settings using the instructions on the Straight Talk website....
If "Simple" is your APN... Make a new one... Anyways, that's not the APN for devices running Android 1.6 and up.. According to the website...
Try this one...
Make a new APN...
Name: SIMPLE Mobile
APN*: simple
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MCC: 310
MNC: 260
Authentication Type:
APN type:
Case sensitive... So make sure everything is like it's there...
Then select it and you should be set n working again...
It worked WONDERS for me.. 9w6 no more ****ty "Cannot establish secure connection"
I'm certain it'll fix your problem too~
Edit: Odd thing is, on CM7 I didn't have any problems.. But in JellyBean I did.. x3 But yeah this fixed it.
Click to expand...
Click to collapse
Sent from my SGH-T679 using xda app-developers app

CM 10 by Dr.Rush

"Ladies and gentlemen, I present you the cm-10-U9000-v0.3-Final
changes:
- Improved performance and stability due to tweaks build.prop
- Do not define name of the caller is delayed
- New status bar - as in SM10.1
- Kernel abenagiel 35.7-oct.4-cmx
- Fixed Titanium Backup
- Errors Found rim mount SD card, with Multi Mount SD-Card PRO
- Beautiful animation download
Download Link http://yadi.sk/d/__whCwph8mhNL"
http://forum.xda-developers.com/showthread.php?p=45322244
cm-10-Ideos-X6-v0.2
mirror
Add these files to system/app and set permission rw-r-r
calendar
Features
1.minor fixes
2.NOVA & ADW Laucher
cm-10-Ideos-X6​-_v0.1
installation
If you are in cm-10-20130303​-Ideos-X6
1. only format Dalvik cache and install ROM
If you are in another ROM
1. format system
2. wipe catch, data
3. wipe dalvik catch
4. install ROM
Features
1.minor fixes
2.fix backlight
3.fix haptic feedback
cm-10-20130303​-Ideos-X6
installation
1. Format system
2. Wipe catch, data
3. wipe dalvik catch
4. install ROM
Features
1.ADW LaucherEX
2.minor fixes
3.change the font (to return the basic fonts, use ICS_Font_-_Roboto_Standard.zip)
------------------------------------------------------------------------------------------------------
CM 10. Fast & stable.
Not work:
HDMI
Radio
Half work:
Camcorder 640x480.
Front camera reversed (used camera MX)
And you say.
installation
1. Format system
2. Wipe catch, data
3. wipe dalvik catch
4. install ROM
recommend kernel CK 03 jb
enjoy
Download link
cm-10-20132002-NIGHTLY-Ideos-X6.zip: http://yadi.sk/d/GL7Hm-f02o7fv
Sent from my HuaweiX6 using xda app-developers app

Sent from my HuaweiX6 using xda app-developers app

Can you provide some more info about this ROM.. Thank you.

Downoaded, wiped EVERYTHING, cam as updated, apn fine.. seems smooth and fine to me.

what is the base ROM
means RCSET CM10 or ABEN's CM10

vivekb said:
what is the base ROM
means RCSET CM10 or ABEN's CM10
Click to expand...
Click to collapse
Base CM10 Dr.Rush
Sent from my HuaweiX6 using xda app-developers app

Do you use holo launcher and locker?
Sent from my GT-I9000 using xda app-developers app

weird problem in both JB 4.1.2
Unable to send any files via solid explorer and cm file manager when Bluetooth is off(Bluetooth FC)
work around for this problem which I found out with trial and error method.in stead of directly sending switch on Bluetooth in settings before you choose to send the file.
other things are working fine apart from the mentioned bugs.
suggestion for next update(if possible)
there are 3 apps related to Google search in the system (Google quick search box,Google search,Voice search) out if which one can be retained.
Android market 2 apps are available in (vending and Google Play store)vending can be removed.
4.2.1 Clock,Keyboard which is better than the present can be used instead of 4.1.2 (camera is already updated)
Not checked the GPS performance I hope it works as usual.
APN works automatically no need to input access point manually.
overall the ROM is cool and too good.

What are the differences between this ROM and Aben's? Can someone who has checked out both comment?
Sent from my CSL-MI410 using xda app-developers app

avi_wizard said:
What are the differences between this ROM and Aben's? Can someone who has checked out both comment?
Sent from my CSL-MI410 using xda app-developers app
Click to expand...
Click to collapse
this ROM is based on aben CM10Rom
some minor difference seen are
APN is automatic
gapps are preinstalled
4.2 camera by default
Holo launcher HD is used instead Trebuchet
torch power widget can be put in status bar(in aben ROM this was not the case) but light not ON
tough OP suggests for CK kernel I'm on Aben's kernel still the performance is great.
in JB thread vivekb mentioned about WiFi tethering working. I tried not working.

So far this ROM looks more smooth but still testing ..
Sent from my HuaweiX6 using xda premium

Can someone please mirror the file?
Thanks.
@(￣-￣)@

mirror please...
Sent from my Huawei X6 using xda premium

Is music player works properly...
In my case its playing but sound output..
Sent from my HuaweiX6 using xda app-developers app

reversegear said:
this ROM is based on aben CM10Rom
some minor difference seen are
APN is automatic
gapps are preinstalled
4.2 camera by default
Holo launcher HD is used instead Trebuchet
torch power widget can be put in status bar(in aben ROM this was not the case) but light not ON
tough OP suggests for CK kernel I'm on Aben's kernel still the performance is great.
in JB thread vivekb mentioned about WiFi tethering working. I tried not working.
Click to expand...
Click to collapse
this cm10 is not related to Aben. he did it himself.
and mirror http://d-h.st/WTW

keeper20086 said:
this cm10 is not related to Aben. he did it himself.
and mirror http://d-h.st/WTW
Click to expand...
Click to collapse
thanks man.
(^ム^)

keeper20086 said:
this cm10 is not related to Aben. he did it himself.
and mirror http://d-h.st/WTW
Click to expand...
Click to collapse
I mean to say the base is aben CM10 rom you can check the signature of most apps in settings.
except for system ui and settings apps which signature says synergye...
any how right now im using this rom without any issue. Great work by Dr.Rush

reversegear said:
I mean to say the base is aben CM10 rom you can check the signature of most apps in settings.
except for system ui and settings apps which signature says synergye...
any how right now im using this rom without any issue. Great work by Dr.Rush
Click to expand...
Click to collapse
are you facing any problem with music player... It's running but no sound output
Sent from my HuaweiX6 using xda app-developers app

I had same issue with both cm10 even viber calls are mute but now music player are working sometime if it doesn't work use vol up and down buttons but still I like this ROM cm 10
Sent from my HuaweiX6 using xda premium

vivekb said:
are you facing any problem with music player... It's running but no sound output
Sent from my HuaweiX6 using xda app-developers app
Click to expand...
Click to collapse
yes there is aproblem with audio output it happened to me initially im using tray volume control to increase volume while playing audio songs.
even i had worst experience, was late for office for 2 days because alarm didnt work when i set in new cm10. 3rd day i came to know that alarm was vibrating with no audio output.

[Q] Stable CM 9.1 not really stable

Hi there. Does anyone else who flashed CM9.1 on their GT-P1000 experienced problems such as:
random reboots
random camera reboots
sometimes turning on wifi portable hotspots causes reboots
random shutoffs
CM9.1 is pretty much a daily driver for my tablet apart from the above unpredictability. camera works, gps works, gsm works, wireless hotspot works, accelerometer works,
what other stable ICS and above rom options would I have? I see some jellybean roms floating around but are any of them suitable as a daily driver?

I am AOKP JB 4.2.2 from Stimpz0r and it is stable as a rock. Everything working as expected.
Sent from my GT-N7100 using xda app-developers app

thanks for the info priyana! such a confident sounding statement. thats it. im flashing that. thanks for the recommendation!

[+] Internal Storage mounting problems - people have reported issues with the internal SD card not being mounted at start-up, this is a bug in all SGT7 device builds, and can be helped by removing your external sdcard at bootup - it is caused by the external sdcard having too many files and delaying the mount at build.
Click to expand...
Click to collapse
Thisi doesn't look too promising. Does this happen to be a big hassle for you priyana?
I'm also reading cautions about making sure my device is MTD. How would one go about checking whether or not I have an MTD partitioned device? I'm going to flash from the official cyanogenmod 9.1 latest stable build if that is any helpful information

The MTD after April was the same for CM9 CM10and CM10.1
And so is AOKP.
So it should be no problem.
But you still need to perform the wipes, data, cache, dalvik.
If you want for good measure, go to cwm advanced menu, the mount portion, and choose to format the /system as well. This is optional.
Remember to use the latest gapps that is for 4.2.2
Then it is ok to restore all TiBackup of user apps and data.
You do remember how to restock if needed right? Just in case.
Sent from my GT-N7100 using xda app-developers app

Very informative. I can't remember restocking because I haven't stocked my device before haha. I'll read up on restocking just in case. Thanks for the help!
Sent from my GT-P1000 using xda app-developers app

Restocking is usually best with overcome method.
Check my signature.
Sent from my GT-N7100 using xda app-developers app

Flashed it successfully but some things I notice, first is laughably minor which is the lack of the CRT off lock animation.
Second is that setting APN wasn't possible to be added manually as I was not able to find the "save" button. I had to use a 3rd party app called HiAPN which automatically set the APN for me.
General sluggishness compared to cm9.1 where frame rate issues are apparent when in cm9.1 there was none. Such as scrolling pages in the home screens and navigating google maps. am I doing something wrong? But overall really stable ROM.
Sent from my GT-P1000 using xda app-developers app

[ROM] Unofficial Liquidsmooth 4.3 XT926 & XT925

I am making unofficial builds of Liquidsmooth android 4.3. These build may not necessarily represent the final work of team liquid on android 4.3 and would not have been possible without team liquid doing all the heavy work to merge the 4.3 changes. This uses the same kernel as cm-10.2. I strongly suggest that you have a back-up and the stock file to flash, just in case. I am using TWRP but this should work with CWM too. Thanks to the razr-qcom team too.
Must have unlocked bootloader, use 4.3 Gapps and do a data wipe before flashing.
Known Issues:
1. Bluetooth
2. Halo notifications
First boot will take a little while (five minutes+).
If you loose root access
1. Go to superuser >settings
2. Change Superuser Access to "Apps and Adb"
3. If that doesn't work then also check the "Declared Permission" box
4. Still have trouble try reading this g+ post: http://tinyurl.com/mbdoz4c
Download roms and gapps(or goo.im) here: http://tinyurl.com/losv96h
Liquid sources: https://github.com/LiquidSmooth
My github: https://github.com/jsnweitzel
Have fun and follow me on twitter to hear about updates: https://twitter.com/XjsnweitzelX
I am running the cobalt theme.
Battery screenshot is with about three hours screen time and on the pc for a little bit flashing new a new rom. Plus I have a maxx too.
Doing any of this is at your own risk and only you are responsible for your device.

I enjoy this ROM very much
Nice to see an official thread.
Sent from my XT926 using Tapatalk 2

I know the 925 ROMs run on the atrix HD so I can give it a try but is it possible to replace the baseband/radio packed in this ROM before flashing? The vanquish baseband only let's my atrix connect to edge on T-Mobile despite correct apn
Sent from my MB886 using xda premium

I can do one for the attic later today.
Sent from my XT926 using Tapatalk 4

jsnweitzel said:
I can do one for the attic later today.
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
Sweet. That would be much appreciated!
Sent from my MB886 using xda premium

Attic darn auto correct... Atrix of course
Sent from my XT926 using Tapatalk 4

jsnweitzel said:
Attic darn auto correct... Atrix of course
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
Gave the atrix build a go and things look fine. Two things: Bluetooth share fc message after bootup and settings fc as well.
Sent from my MB886 using xda premium

Is anyone else suffering with issues in the camera app? It keeps telling me "Please insert SD card" with the little sign never disappearing. I do have an SD card, and it does read perfectly, but it still won't let me take pictures or record video. I thought of using my phone's storage, but it doesn't give me that option. I've used both stock camera app and JB Camera+.

New builds up last night and bluetooth comes on without crashing. I don't have a bluetooth device with me right now to fully test.

Tried to clean flash a few times last night and it kept either not passing the moto logo or it would boot then get half way thru setup and reboot then get stuck...
Sent from Planet HD

Everything is working great for me on the latest build, didn't run into any random reboots either.
Sent from my XT926 using xda premium

I tried the latest atrix build liquid build 3.0
And i encountered some wifi issues it was connecting just fine yesterday but today Sep-07 it says avoiding connection lol I'm in front of the router & keyboard sometimes lags & if i keep trying to type it FC's me xD!!
I feel like liquid smooth 2.9 was the best but keyboard issues are also present in 2.9 battery is excellent 8-9 hours of use battery was still on 40% normal atrix battery
Also is there anyway to change some stuff to make the phone lightweight in resources sometimes I'm left with 300-200 ram lol why?? The phone is suppose to have 1GB of Ram i have a S2 with a custom Rom & with all the same apps & it haves 600-500 Ram left ... More than the atrix HD :-/
Sent from my MB886 using xda app-developers app

The last 2 releases get stuck at the unlock bootloader screen after first reboot. had same problem with i think was the 9/6 cm 10.2 build

brian19876 said:
The last 2 releases get stuck at the unlock bootloader screen after first reboot. had same problem with i think was the 9/6 cm 10.2 build
Click to expand...
Click to collapse
See I tried multiple reboot / clean flashes afterwards and even tried earlier builds with different gapps releases and I still get constant reboots during initial phone config.
Sent from Planet HD

is there any place to see the change log between versions be nice to know if its worth trying to flash

Still receiving System UI crashes every once in a while, otherwise very buttery and snappy rom.

jsnweitzel said:
New builds up last night and bluetooth comes on without crashing. I don't have a bluetooth device with me right now to fully test.
Click to expand...
Click to collapse
Its working good here just tested against my Desktop will try my external speakers later but no problem so far and it is smooth for me I did DL from Liquids G+ page but I am guessing some of this is yours due to it being your kernel - either way persistance pays off Thanks

I am on team liquid now. Official threads are at Droidrzr
Sent from my XT926 using Tapatalk 4

jsnweitzel said:
I am on team liquid now. Official threads are at Droidrzr
Sent from my XT926 using Tapatalk 4
Click to expand...
Click to collapse
Congrats and thanks
Sent from Nexus 7

How does this rom compare to slim bean? They seem similar.

[ROM][4.4]AOSP KitKat

Credit and Thanks
This is Android 4.4 KitKat for the MB886 Atrix HD. These are built from @dhacker, @epinter, and the rest of the razrqcom dev team's sources. All credit goes to them, I'm simply compiling the rom for the Atrix HD and sharing it with everybody else.
Warning
Before you go flashing this, be aware that it should be considered early alpha and things might not fully work. If you flash this and your phone dies, catches fire, or robs old ladies, it's on you and you've been warned.
There's also an issue with our Device Family in general where some phones just can't flash 4.4 or run it. If you're one of the unlucky one, pray that @Hashcode and @dhacker figure it out.
Info
Credits and warning out of the way, if you have a successful flash the rom works quite well and seems to be pretty stable, though I haven't done that much yet. Be aware that this doesn't have root by default, so you'll want to flash a zip to root as well.
What your're here for
Latest Deodexed Rom
Latest Odexed Rom
KitKat Rom Folder
Gapps
Odexed Gapps
Root
The gapps are PA Gapps and the root is Super SU. Credits to the PA Team and Chainfire for them.
How to enable ART
Install Odexed 4.4 and Odexed Gapps -- This is a requirement and ART only works on ODEXED ROMS....DO NOT PROCEED WITH DEODEXED
On first boot, skip entering Google username and password
Instead, go to Settings>About Phone, scroll to the bottom, and tap Build Number 7 times to enable Developer Options
Go to Developer Options>Seletc runtime and select Use ART instead of Dalvik.
After you select it it will force reboot the phone, keep that in mind so you can access recovery in time
In recovery, Wipe Cache and Dalvik Cache...boot phone
That's pretty much it. Enter your Account Information and use your phone as normal....
Don't flash dumb sh!t to /system after this....
Bugs
Weak signal strength (not for all of us, but for some it's an issue)
External SD detected as read only by certain apps (Titanium Backup for example)
Hair lice (requires Nix)
Apps don't always work or install when using ART
Front Camera doesn't work
Roaches (needs tweezers and a lighter....wait, I mean Raid)
For Some, Video playback doesn't work
Plugging and/or unplugging HDMI can cause the system to freeze up -- have to hard reset to fix (hold both volumes+power for 10 seconds)

Freaking sweet. Will be flashing to test on Sunday.
Sent from my MB886 using Tapatalk

Does data work @skeevydude and thank you for compiling it and thank you razrqcom-de-team
Sent from my MB886 using XDA Premium 4 mobile app

skeevydude said:
Credit and Thanks
This is Android 4.4 KitKat for the MB886 Atrix HD. These are built from @dhacker, @epinter, and the rest of the razrqcom dev team's sources. All credit goes to them, I'm simply compiling the rom for the Atrix HD and sharing it with everybody else.
Warning
Before you go flashing this, be aware that it should be considered early alpha and things might not fully work. If you flash this and your phone dies, catches fire, or robs old ladies, it's on you and you've been warned.
Info
Credits and warning out of the way, if you have a successful flash the rom works quite well and seems to be pretty stable, though I haven't done that much yet. Be aware that this doesn't have root by default, so you'll want to flash a zip to root as well.
What your're here for
Latest Rom
KitKat Folder
Gapps
Root
The gapps are PA Gapps and the root is Super SU. Credits to the PA Team and Chainfire for them.
Bugs
External SD not mounting.
Art causes crashes (because gapps are deodexed)
Click to expand...
Click to collapse
could not get it working but its alpha what do you expectnice to see we have development on this device for kitkat thank you and keep up the great work

sickkside13 said:
Does data work @skeevydude and thank you for compiling it and thank you razrqcom-de-team
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep, but the signal is weak. Only tried 3g and 4g. Heard 2g might not work earlier today, haven't checked yet. My only real issue is no external sd and not being able to restore my Titanium backups.
I'll add that I installed this with cwm 6.0.4.4 & adb sideload as root on my pc....been too lazy to setup the udev rules so I gotta run adb as root. I won't say one way or another is the other recoveries work or not with this.

been wanting to run this on my HOXL but there hasnt been a rom made for it yet.
willing to move from holoblur to this rom once its fully stable.

Holly smokes I feel like breakdancing right now. Lol
Thanks to all the people involved with this and specially to our developer @skeevydude.
You guys rock....
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

SVLAN said:
Holly smokes I feel like breakdancing right now. Lol
Thanks to all the people involved with this and specially to our developer @skeevydude.
You guys rock....
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
dude, I haven't done much more than compile this and any one of us could have done that. Just look at the commits, dhacker and epinter get all the credit.

Chrome doesn't seem to like the Gapps you linked to, says they're malicious. Anyway, I'll be holding off on AOSP at least until someone gets the external SD working (I already tried taking it out and putting it back in like it fixed it on whatever ROM we had the problem on before, but no luck). I need my backups!

skeevydude said:
dude, I haven't done much more than compile this and any one of us could have done that. Just look at the commits, dhacker and epinter get all the credit.
Click to expand...
Click to collapse
I know bro, but you to me still my/ours developer. My point is that regardless and I know that dhacker and epinter are the guys that have made all of this possible but I also have to credit you as you deserve it since you are a strictly mb886 dev-user.
Thanks to all and you.
Just make sure is not a gay sh!t. Lol
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium

So what's "Latest ROM" that cwm aborts install of every time? And then what is KitKat Folder?
Sent from my MB886 using XDA Premium 4 mobile app

I'm on CM11 from the RAZR HD and it seems to work perfectly fine other than video playback but I can live with that for now
Sent from my XT925 using xda app-developers app

EcHoFiiVe said:
I'm on CM11 from the RAZR HD and it seems to work perfectly fine other than video playback but I can live with that for now
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
What about signal strength?
Sent from my XT925 using Tapatalk

joe3681 said:
So what's "Latest ROM" that cwm aborts install of every time? And then what is KitKat Folder?
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Latest rom is the latest AOSP 4.4 I've built, KitKat Folder is the folder I have them saved to on Copy.com, ya know, so old copies are around if a newer nightly breaks something -- more of a future thing....

I didnt get any signal with xt925...great to see 4.4 so close to our device though...

OP Updated.
New rom under latest nightly
Intermediate build between yesterdays and this had partial SD support, could read but not write which is at least good enough to restore TB Backups. Not sure if this one is read only or read/write cause I'm still on the boot animation

Awesome man! Downloading it now! Thanks!
Sent from my Atrix HD using XDA Premium 4 mobile app

Updated bugs in the OP
Changed no external sd to External SD mounted as read only
Added weak signal strength
I'm gonna mess with some mount commands and see if I can't get the external sd to be read/write. Wish me luck.
At least we can restore from the external sd....better than nothing.

Great news! Thank you! I'll give it a shot. If there is at least read only - it is ok for me because I'm using card for music only.

tember1214 said:
What about signal strength?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
Signal strength seems to be fine, at least for me.
Sent from my XT925 using xda app-developers app