Related
Huhu,
some weeks ago it start that i had problems with my headphone jack. sometimes it stops playing music when it get touched while i put it in the pants. and now i can be happy if the smartphone register 1 of 100 times i connect my headphones.
someone of u ever had the same problem and repair it himself?
pls let me know because that s*ck ;] and sry my bad english
I think the best and easiest thing to do to fix this is take it in and have them replace it.
Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App
i also had one in but putting him out not help ;()
Repair Headphone Jack
Had problems with D1 phone jack, and D3 also. To me it is a matter of thickness of the male jack. I have real nice Sony ear buds but the jack cuts out, move it and is good for short while. I pinched the jack to make it oblong, very desperate move. Cuts out much less, but still kinda crapy. I have an older Sony ear buds and the jack is thicker and have no problems. Even at the gym.
Bottom line is cheesy, cheap parts there on that Motorola.
Cameron6472 said:
Get the pocket lint out. Seriously, lol. Mine was doing the same thing, so I looked in it with a really bright flashlight and saw pocket lint pressed against the bottom
Sent from my XT862 using XDA App
Click to expand...
Click to collapse
+1
This happened to me twice. So, I guess that should be +2!
The plug would stop snapping in. I thought for sure I had broken the jack. But after a little close inspection, a flashlight, toothpick and can of duster I was able to get it working good as new again.
some days ago i was looking around the internet and find these
http://www.ifixit.com/Teardown/Motorola-Droid-3-Teardown/6108/1
so some days later i was funny enough to open my Droid3, too.
and then i was able to get some more pocket lins out of the headphonejack.
i was thinking its already clean but these wasnt visible from the top.
and now all is woorking fine
Hope someone on here can help me; I've searched everywhere can could not find a solution. The technician who worked on the phone for over 10-15 hours over 1 month looked at me in despair and said "I have no clue"; I thought he was going to start crying.
Everything but the camera worked perfectly before the technician opened the phone to start working in it a month ago. It went downhill from there.
Sequence of events
1. Had a camera problem (constantly out of focus) on my US HTC One Dev edition that started 6 months after owning the phone, which I absolutely loved. Searched and found this was a hardware issue.
2. I'm in Canada with a US phone, so no warranty. HTC wants $200 and 3-6 weeks to fix it. Local shop wants $75. After asking if they knew how to fix this specific phone and that they had the tools, I leave it with them.
3. They installed the new camera, damaged my top speaker grille and phone side, and the screen is uneven (technician: worst phone I have ever seen to repair) If you want an idea of the process have a look at the ifixit website.
4. I order top grille for replacement ($10) from ebay. I realize the screen is has not been properly installed and after 2 days I have a purple dead pixel.
5. I leave for a trip with my family over the Holidays - I start taking photos in low light, guess what? Damn purple issue starts. The new camera was an omnivision from a bad batch (pre-Nov 2013). Fortunately, as a true geek I brought another camera with me, just in case.
6. I order a new camera myself from etradesupply $30 plus $20 shippling = $50. 2 more weeks go by.
7. I receive the grille and get the phone back to the technician, he puts it back together, but the grille won't bend and stick to the phone.
8. New camera arrives and Iget the phone back to the technician to install it, which he does.
9. I come back to pick up the phone - screen is all pixelated and dies shortly thereafter.
10. Technician proposes to swap screen from a bricked One he has from another customer. I hesitate, but agree; just want a working phone already. Donnor phone is pretty much destroyed in the process.
11. Back at the shop to pick up my phone: everything finally looks great. I realize back home that the sim card cannot be detected, and that the speakers make a bad creakling noise when volume is higher than 8 or 9 or at normal levels during a phone call
12. Back at the shop - he fixes the sim card issue (pooly connected wire), speaker issue remains and we have no clue where it's coming from. That's were we are at.
Lessons learned for both of us:
The HTC One is a fantastic phone...until it breaks.
technicians should refuse to repair the HTC One, it's almost guaranteed that they will damage something
I should have sent the phone to HTC for 4 weeks paid $200, pay $100 for a loaner phone and be done with the problem...
Problem description
Problem is blatant when volume is at 8 or 9 or more, but is also there at lower volumes, and during phone calls at any volume, there is a creaking noise from the speakers mostly top one. When we press on the grilles the problem is slightly better.
When the whole phone (electronics) was outside the aluminum unibody frame the noise would stop. As soon as we inserted the top end of the phone assembly into the aluminum frame the noise started.
When beatsaudio is off problem is not as bad.
We inspected the motherboard, daughterboard, casing, speakers and everything looks fine (i.e. nothing broken or missing).
Questions
1. Speaker worked perfectly before the technician swapped the screen and reassembled the phone. It's kind of odd that both speakers started having the same issue at the same time. Is it worth trying to replace the speakers with new ones?
2. Could it be interference from something that was not properly put together?
3. Should I use the phone as a hammer, throw it as far as I can from the top of a 30-story building, in a river from a dam, put it in a bucket filled with fuel, or tie it to a propane tank and shot a bullet into it?
Thanks so much for any help!
fujisan582 said:
Hope someone on here can help me; I've searched everywhere can could not find a solution. The technician who worked on the phone for over 10-15 hours over 1 month looked at me in despair and said "I have no clue"; I thought he was going to start crying.
Everything but the camera worked perfectly before the technician opened the phone to start working in it a month ago. It went downhill from there.
Sequence of events
1. Had a camera problem (constantly out of focus) on my US HTC One Dev edition that started 6 months after owning the phone, which I absolutely loved. Searched and found this was a hardware issue.
2. I'm in Canada with a US phone, so no warranty. HTC wants $200 and 3-6 weeks to fix it. Local shop wants $75. After asking if they knew how to fix this specific phone and that they had the tools, I leave it with them.
3. They installed the new camera, damaged my top speaker grille and phone side, and the screen is uneven (technician: worst phone I have ever seen to repair) If you want an idea of the process have a look at the ifixit website.
4. I order top grille for replacement ($10) from ebay. I realize the screen is has not been properly installed and after 2 days I have a purple dead pixel.
5. I leave for a trip with my family over the Holidays - I start taking photos in low light, guess what? Damn purple issue starts. The new camera was an omnivision from a bad batch (pre-Nov 2013). Fortunately, as a true geek I brought another camera with me, just in case.
6. I order a new camera myself from etradesupply $30 plus $20 shippling = $50. 2 more weeks go by.
7. I receive the grille and get the phone back to the technician, he puts it back together, but the grille won't bend and stick to the phone.
8. New camera arrives and Iget the phone back to the technician to install it, which he does.
9. I come back to pick up the phone - screen is all pixelated and dies shortly thereafter.
10. Technician proposes to swap screen from a bricked One he has from another customer. I hesitate, but agree; just want a working phone already. Donnor phone is pretty much destroyed in the process.
11. Back at the shop to pick up my phone: everything finally looks great. I realize back home that the sim card cannot be detected, and that the speakers make a bad creakling noise when volume is higher than 8 or 9 or at normal levels during a phone call
12. Back at the shop - he fixes the sim card issue (pooly connected wire), speaker issue remains and we have no clue where it's coming from. That's were we are at.
Lessons learned for both of us:
The HTC One is a fantastic phone...until it breaks.
technicians should refuse to repair the HTC One, it's almost guaranteed that they will damage something
I should have sent the phone to HTC for 4 weeks paid $200, pay $100 for a loaner phone and be done with the problem...
Problem description
Problem is blatant when volume is at 8 or 9 or more, but is also there at lower volumes, and during phone calls at any volume, there is a creaking noise from the speakers mostly top one. When we press on the grilles the problem is slightly better.
When the whole phone (electronics) was outside the aluminum unibody frame the noise would stop. As soon as we inserted the top end of the phone assembly into the aluminum frame the noise started.
When beatsaudio is off problem is not as bad.
We inspected the motherboard, daughterboard, casing, speakers and everything looks fine (i.e. nothing broken or missing).
Questions
1. Speaker worked perfectly before the technician swapped the screen and reassembled the phone. It's kind of odd that both speakers started having the same issue at the same time. Is it worth trying to replace the speakers with new ones?
2. Could it be interference from something that was not properly put together?
3. Should I use the phone as a hammer, throw it as far as I can from the top of a 30-story building, in a river from a dam, put it in a bucket filled with fuel, or tie it to a propane tank and shot a bullet into it?
Thanks so much for any help!
Click to expand...
Click to collapse
Wow.. Just wow... Looks like your speaker grills haven't been put in properly.. Did he replace only the LCD or the LCD+front housing?
Sent from my HTC One using Tapatalk
Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.
Thanks for the replies!
n1234d said:
Wow.. Just wow... Looks like your speaker grills haven't been put in properly.. Did he replace only the LCD or the LCD+front housing?
Click to expand...
Click to collapse
He replaced the full front housing to make sure we would not have problems fitting the speaker grills again.
ZeroInfinity said:
Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.
Click to expand...
Click to collapse
Sounds like you are on to something. I got a similar answer on ifixit where I posted the issue.
Will get the guy to open my one up again and make sure the speaker is properly in place before ordering a new one. These suckers are $2, but shipping from HongKong is $23!
Thanks again for your help!
ZeroInfinity said:
Most likely a bad speaker placement. It sounds to me that the "technician" didn't place the speakers properly and it probably is now always in contact with the aluminium grills. That will cause weird audio creaking noise as the speaker vibrations are vibrating the aluminium grills as well. That's why if you press on the speaker grills, it will stop that extra vibration from the speaker grills. Beats Audio will just make more vibrations in the speakers and worsen your problem.
I suggest you find another "technician" because the one you went to is clearly stupid.
Click to expand...
Click to collapse
Hi Zero, probably should start a new thread for this, but I've noticed this in all the Ones I've seen. What happens is the Upper speaker has good amounts of bass and treble but very low midrange. On the other hand, the lower speaker has good midrange, okay bass, and lacking treble. That's exactly why it sounds uneven. Can you please make a mod to solve this?
For anyone interested in an update - the issue doesn`t come from vibration on the grilles. There is a small rubber around the speaker to prevent that and we doubled it to see if it makes any difference. It doesn`t. We realized that the noise was coming from some kind of short circuit whenever we pressed the daugther board along the top of the phone (we could hear a small buzz each time we pressed it). Next stop = electronics technician...
fujisan582 said:
For anyone interested in an update - the issue doesn`t come from vibration on the grilles. There is a small rubber around the speaker to prevent that and we doubled it to see if it makes any difference. It doesn`t. We realized that the noise was coming from some kind of short circuit whenever we pressed the daugther board along the top of the phone (we could hear a small buzz each time we pressed it). Next stop = electronics technician...
Click to expand...
Click to collapse
Hello mate ! Sorry for asking this question, as this thread was started long ago. How does it perform now ? Do you regret that your device has been repaired ? Can you please upload some photos of the device ? Does it look and feel like it was a new device after the entire messed up repair ? Sorry for asking these questions. Thanks in advance :good:
Hey guys,
I just swapped my silver one to a black shell.
Very simple change over for the most part.
Prior to snapping the back cover on, I made sure to test all functions. They all passed fine. I then snapped on the back and rebooted the phone. The lower speaker no longer played any audio, instead just clicks until the sound finishes. It's incredibly annoying during speaker phone calls. Any idea what it could be, or better yet, is there an app that can force the phone into mono mode with only the top speaker working?
Hey guys,
I just swapped my silver one to a black shell.
Very simple change over for the most part.
Prior to snapping the back cover on, I made sure to test all functions. They all passed fine. I then snapped on the back and rebooted the phone. The lower speaker no longer played any audio, instead just clicks until the sound finishes. It's incredibly annoying during speaker phone calls. Any idea what it could be, or better yet, is there an app that can force the phone into mono mode with only the top speaker working?[/QUOTE]
Alright, took it apart again and inspected it. Found the problem. at the base of the phone there is a ground clip that covers and grounds the usb board to the main board. Directly above that there is a very small connector with a black and red wire in it, those are your lower speaker connector. when reinserting it into the back cover the red wire moved onto the ground plate and wormed its way between it and a spring clip that ground it to the back cover.This spring clip applied enough force to lightly cut the casing thus grounding the positive speaker feed to the phone case. Kinda a b!tch to fix, full disassemble is needed to pull that board out, i then used liquid electrical tape on the damaged spot. Let it dry and reassembled. Now its black and perfect!
I attached a photo of the red wire and its location. Be careful with this area, I was lucky the board or phone didn't short out!
View attachment 2559853
How did you even get it apart??
Iz3man said:
Hey guys,
I just swapped my silver one to a black shell.
Very simple change over for the most part.
Prior to snapping the back cover on, I made sure to test all functions. They all passed fine. I then snapped on the back and rebooted the phone. The lower speaker no longer played any audio, instead just clicks until the sound finishes. It's incredibly annoying during speaker phone calls. Any idea what it could be, or better yet, is there an app that can force the phone into mono mode with only the top speaker working?
Click to expand...
Click to collapse
Alright, took it apart again and inspected it. Found the problem. at the base of the phone there is a ground clip that covers and grounds the usb board to the main board. Directly above that there is a very small connector with a black and red wire in it, those are your lower speaker connector. when reinserting it into the back cover the red wire moved onto the ground plate and wormed its way between it and a spring clip that ground it to the back cover.This spring clip applied enough force to lightly cut the casing thus grounding the positive speaker feed to the phone case. Kinda a b!tch to fix, full disassemble is needed to pull that board out, i then used liquid electrical tape on the damaged spot. Let it dry and reassembled. Now its black and perfect!
I attached a photo of the red wire and its location. Be careful with this area, I was lucky the board or phone didn't short out!
View attachment 2559853
Wow, you've got some courage man! I really want to convert mine to black, but I'm scared.. Never opened a phone before. Post some pics of the phone please.. Any gaps/other issues?
Sent from my iPod touch using Tapatalk
SaHiLzZ said:
How did you even get it apart??
Click to expand...
Click to collapse
Carefully and with a bit of swearing. The back cover is actually dead simple to take off, if it wasn't for the damned adhesive on the sides. Be prepared to need a new rear cover.
I used 3 different thickness guitar picks and a plastic pry tool ( those blue guys you get when you buy any part out of china). I would recommend heating up the sides to start, if you have a bean bag heating pad, use it, put it in the microwave for 2 mins and sit it on the sim card side of the phone. Because the plastic is a little flexible, I was able to slip a pick between the screen and the sim slot, then pry it upwards and slowly slide the pick toward the bottom of the phone. Once you get a little ways down stop and leave the pick in, take a thicker one and to the same, replacing the first with the new one. Repeat with another, the trick is to apply light bust constant pressure on the glue to break the bond. After a few mins of that and possibly reheating, you should be able to go around the corner and across the bottom. The glue is only of the sides. There are 4 clips of each side and 2 on both the top and bottom.
Make sure that the top assembly comes out from the bottom of the phone first or you risk damaging the power button/ir blaster.
I bought a full screen replacement with back cover from etrade, I also bought an empty shell from eBay, I used the etrade parts, but I'll swap the original screen to the ebay parts tomorrow.
Wow, you've got some courage man! I really want to convert mine to black, but I'm scared.. Never opened a phone before. Post some pics of the phone please.. Any gaps/other issues?
Click to expand...
Click to collapse
I was too, I watched videos, I read the forums. In the end I just grabbed it and tried to see If I could even fit the first pick in, then I got farther and finally got it off. The guts are simple to change over, just be aware that the screws are not interchangeable, so take a piece of paper make notes and keep track of your screws. When I got it rebuilt I was bumbed out at the speaker, but because there is no glue on the new free I was able to get the back off in less then a minute.
I see no gaps or problems. Everything works and the phone looks great, in my opinion they should have never made a white and silver. I'll post some picks when I'm back home tonight.
I followed the videos from Go Cell Phone Repair, he has 2, one is the tear down the other is the reassembly, Google YouTube for them, he was very thorough.
So I foolishly offered to replace the broken screen on a Nexus 6. There's a lot of screws, but really good videos and there were no big surprises.
UNTIL...
I have no idea how to get the little black rectangles of plastic back in the holes at top and bottom of the phone. I've heard them called speaker grills, which is obviously inaccurate since it is a tiny slab of plastic with no holes.
But really I don't care what you call them. NO WHERE have I found anyone talking about how to put them back. There are a lot of posts about people that had them fall out. I guess Motorola FIXED that! They were extremely difficult to push out from the back side of the old screen. Nothing I do remotely comes close to popping them in to the new screen. I'm about ready to file off the tabs and use a drop of superglue. Perhaps that is even the "approved" repair.
But if anyone knows the right way to replace these things I'd love to hear it. I am fresh out of ideas.
I'm in the SAME position with my Moto X Pure and I can't find any info on the matter!
If you can, perhaps some pictures of the backside of both grille and screen may be useful here.
They were quite easy to pull off on mine and also easy to put back. However, when I clipped them back they got a bit lose so I had to add tiny drop of super glue on each of them before clipping it back on. Also, they aren't plastic turns out they're ceramic and I think I read somewhere that these were left over volume buttons from the Nexus 5.
Sent from my Nexus 6 using Tapatalk
I think I'm going to take a dremel to it and grind off the tab. This should allow it to sit down at the proper depth. Then some superglue. I am now worried about sticking ceramic to plastic. But grinding should show if it is plastic or not. And I have to do something. This phone can't just sit in the middle of my workspace forever.
I am not remotely a superglue fan. It always seems remarkably good at holding what it should not while what it should just slides off. (yes I do buy the correct version based on label). But we'll see.
Good luck but be careful you don't accidentally drop some on the mesh. I'm still wondering as to why it's not clipping back in with you. Almost everywhere I read it's pretty darn easy and straight forward.
Sent from my Nexus 6 using Tapatalk
Anyone having the same problem? Im not sure if its because of the whitestone adhesive, the dual speaker mod or what. Its getting annoying that I need to use the speaker just to hear the person im talking to.
Is this happening only when placing calls through your carrier or also when placing whatsapp and facebook messenger calls?
you probably got some of the Whitestone adhesive leaked into the earpiece speaker and then dirt/dust clogging it up, several people reported same thing happening, some careful cleaning with pure alcohol and wipes should sort it
RossTeagan said:
Is this happening only when placing calls through your carrier or also when placing whatsapp and facebook messenger calls?
Click to expand...
Click to collapse
I only call through my carrier, and I notice how weak it was when the dual speaker mod sounded a bit odd
j_hansen said:
you probably got some of the Whitestone adhesive leaked into the earpiece speaker and then dirt/dust clogging it up, several people reported same thing happening, some careful cleaning with pure alcohol and wipes should sort it
Click to expand...
Click to collapse
Well.. it " leaked INTO the earpiece " how would alcohol clean the inside?
Update
Sorry for talking first, reasearching later.
So ive made a search about this and what you said was exactly what they did.
chancces are it is just a little bit and it hasn't leaked deep into it but basically just covering the earpiece and clogging it up, give it a shot, you have nothing to lose anyway
xDreDz said:
Well.. it " leaked INTO the earpiece " how would alcohol clean the inside?
Update
Sorry for talking first, reasearching later.
So ive made a search about this and what you said was exactly what they did.
Click to expand...
Click to collapse
After alchol drys. Run speaker cleaning app. They have them in play store. Similar situation happened on 1 of my old phones. The app helped after cleaning out with alcohol.
I had low volume on the ear placed speaker, tried all of the various tricks.
Only way to get my volume back was compressed air
note 8 earpiece volume
xDreDz said:
Anyone having the same problem? Im not sure if its because of the whitestone adhesive, the dual speaker mod or what. Its getting annoying that I need to use the speaker just to hear the person im talking to.
Click to expand...
Click to collapse
Ok heres the scoop on low note 8 earpiece volume. i moved up from a note 5 and could barely hear my calls. i looked at note 5 earpiece and holes are open. i looked at note 8 and found the holes are covered with aluminum---no open holes??? i used a magnified reader to see them. i used a pin and gently open 6 holes across the speaker again useing magnifier i could see the holes open. guess what? i had to turn the volume down!!! i don,t know if that aluminum cover was supposed to be removed at assenbly but the note 5 has nothing shiny on the earpiece speaker. i am now a happy camper and no longer hae to use my bluetooth earpiece.: CAUTION don,t need to push on pin hard just put it there and twist it a bit u will feel it move.
Well, maybe you punctured a water seal, I would be very careful about moisture and splashes, not to say submerging the device
I had the same issue with my note 8 I bought. The ear piece was more of a brown color than black so I knew it was clogged with dust or something. I took it to a professional and they said they would have to replace the entire LCD screen since the speaker was linked into it. They told me it would cost $280 to replace it. I told them to basically piss up a rope and I left. When I got home I used gorilla tape and put it over the mesh speaker and pressed it in with the end of a screwdriver just enough to get it touching the mesh..not hard. Pulled it off and did this a couple more times. The speaker mesh looks brand new and I hear perfect now. So try that.
jusgrr8 said:
Ok heres the scoop on low note 8 earpiece volume. i moved up from a note 5 and could barely hear my calls. i looked at note 5 earpiece and holes are open. i looked at note 8 and found the holes are covered with aluminum---no open holes??? i used a magnified reader to see them. i used a pin and gently open 6 holes across the speaker again useing magnifier i could see the holes open. guess what? i had to turn the volume down!!! i don,t know if that aluminum cover was supposed to be removed at assenbly but the note 5 has nothing shiny on the earpiece speaker. i am now a happy camper and no longer hae to use my bluetooth earpiece.: CAUTION don,t need to push on pin hard just put it there and twist it a bit u will feel it move.
Click to expand...
Click to collapse
You are a life saver man. I mean i thought i had to give my phone for repairing or replacing the ear piece. But your solution worked like charm. You deserve appreciation.:good:
You can use compress air to clean out the earpiece
Michaelmc88 said:
I had the same issue with my note 8 I bought. The ear piece was more of a brown color than black so I knew it was clogged with dust or something. I took it to a professional and they said they would have to replace the entire LCD screen since the speaker was linked into it. They told me it would cost $280 to replace it. I told them to basically piss up a rope and I left. When I got home I used gorilla tape and put it over the mesh speaker and pressed it in with the end of a screwdriver just enough to get it touching the mesh..not hard. Pulled it off and did this a couple more times. The speaker mesh looks brand new and I hear perfect now. So try that.
Click to expand...
Click to collapse
Been ages since I logged into this website. Had to do a password reset just to say Thank You. This worked like a charm. I had the low volume issue since a year but did not actually think of searching for a fix because I was using either loud speakr or headset. Thanks again. I was using the low volume as an excuse to buy a new phone which I wont now