I desperately miss swype... even with this larger keyboard, I can type faster on my phone because it has swype.
Anyway, I have followed the directions for installing some Google apps without root, and I side loaded dropbox successfully. I am waiting / hoping for a backup method before I try rooting, but in the meantime I was wondering if anyone has succeeded in installing swype on their device, root or no?
Sent from my KFTT using xda premium
Installing swype has crossed my mind, but I have not done it yet on the KFHD. I did it with the KF 1st gen and it required rooting and it could get a little messy but once it was up and running, it wasn't a problem. I actually used SlideIT keyboard but right now the stock keyboard is a little pleasing so I haven't switched.
Sideloading doesn't work on keyboards, a rom might be necessary
alkemist80 said:
Installing swype has crossed my mind, but I have not done it yet on the KFHD. I did it with the KF 1st gen and it required rooting and it could get a little messy but once it was up and running, it wasn't a problem. I actually used SlideIT keyboard but right now the stock keyboard is a little pleasing so I haven't switched.
Click to expand...
Click to collapse
that was relly helpfull
Successfuly installed Smart keyboard pro using method described here: http://forum.xda-developers.com/showthread.php?t=1369205
Sent from my KFHD rooted
anastasis96 said:
that was relly helpfull
Click to expand...
Click to collapse
All you have to do is ask. The method I found was on another board and I don't like to step on toes by cross referencing on another board.
I am revising this post on how I got swype beta installed and working on KFHD, the original KF method is not working since amazon locked out the ability to swap keyboards. This requires your device to be rooted
1) Sign up for Swype Beta on their website and download their installer on your KFHD.
2) Install the Installer APK and Log in
3) Select your Beta version and download
4) Install swype
5) Go to data/apps and move swype apk to system/apps and make sure permissions are rw-r-r
6) Install NookColorTools_0.2.apk found here: http://forum.xda-developers.com/showthread.php?t=868366 Link courtesy of timurg
6) Reboot
7) Open NookColorTools and you will be able to select your keyboard. IF you keep getting a Force Close message, just dismiss, go back to system/apps and reinstall swype and force close should stop
8) Enjoy
I was also able to get this method to work with SlideIT keyboard.
So I installed swype beta, as well as nook tools... but when I try to enable swype in its app, it takes me to the default screen for co figuring the built in keyboard. The keyboard selection button in nook tools only lists the default option. Do I need to move the swype apk to system/apps ? If so, can anyone recommend a file manager that will allow me to access that dir without root?
Thanks!
Sent from my KFTT using xda premium
Yes, you have to move apk to the system folder. And no, you can't do this without root.
Sent from my KFHD
timurg said:
Yes, you have to move apk to the system folder. And no, you can't do this without root.
Sent from my KFHD
Click to expand...
Click to collapse
I did a few installs of swype trying to figure out the cleanest install, as you don't need to move any lib files in your linked post and even though it appeared all the files were removed for another clean install, it still showed up without being in my system/app folder. I will fix my post.
Swype Beta has closed
So I rooted my device in order to try again to get Swype installed. I followed your instructions, however immediately after enabling Swype Beta in the Nook color tools, I get a message that Swype Beta has closed. This repeats every few seconds. Is this the force close error you mentioned? What do you mean by "go back to system/apps and reinstall swype"? I tried deleting the swype-input apk from system/apps and reinstalling the swype beta apk, but it led to the same result. Any advice?
Nevermind -- figured it out
OK, so I tried moving the *installer* apk to system/app (using RootExplorer), then launching said apk (using file expert). Enabled swype in nook color tools and now it's working! hurray!
So, I did install Swype and several other keyboards to check. They all work good in portrait mode. But in landscape mode, the navigation bar closes a part of keyboard. The same happens to all keyboards I tried: Swype, Go keyboard, Swift keyboard. Did Anybody had the same problem?
Melodycd said:
So, I did install Swype and several other keyboards to check. They all work good in portrait mode. But in landscape mode, the navigation bar closes a part of keyboard. The same happens to all keyboards I tried: Swype, Go keyboard, Swift keyboard. Did Anybody had the same problem?
Click to expand...
Click to collapse
Yes, I have the same problem. As a partial solution - Smart Keyboard Pro has an option to show arrows on the left edge, so the navigational panel closes arrows and not interferes with the letter block of keyboard.
Swype Default from Swype Installer
Got it installed thanks for the tips! The odd thing is when I downloaded the Swype installer and installed it, it gave me the option right from the Swype page to set as default keyboard and set preferences. I installed Nook Tools before I downloaded Swype (I obviously can't follow directions:laugh, but didn't need to go into it to set the keyboard. Like I said the option to set as default keyboard was in the Swype installer app. Works great - vastly improves my chances of sticking with the KFHD!
I have only tried it in Portrait mode, so can't comment on the Landscape issues (I use my KFHD in Portrait mode about 90% of the time).
alkemist80 said:
I am revising this post on how I got swype beta installed and working on KFHD, the original KF method is not working since amazon locked out the ability to swap keyboards. This requires your device to be rooted
1) Sign up for Swype Beta on their website and download their installer on your KFHD.
2) Install the Installer APK and Log in
3) Select your Beta version and download
4) Install swype
5) Go to data/apps and move swype apk to system/apps and make sure permissions are rw-r-r
6) Install NookColorTools_0.2.apk found here: http://forum.xda-developers.com/showthread.php?t=868366 Link courtesy of timurg
6) Reboot
7) Open NookColorTools and you will be able to select your keyboard. IF you keep getting a Force Close message, just dismiss, go back to system/apps and reinstall swype and force close should stop
8) Enjoy
I was also able to get this method to work with SlideIT keyboard.
Click to expand...
Click to collapse
Worked perfectly for me, thank you.
timurg said:
Successfuly installed Smart keyboard pro using method described here: http://forum.xda-developers.com/showthread.php?t=1369205
Sent from my KFHD rooted
Click to expand...
Click to collapse
Registered just to say THANK YOU! :good:
It all worked perfectly for me, thank you!
Anyone worked out how to fix the hidden part of the keyboard in landscape view?
Thanks!
I got Swype working by installing it then using titanium backup to convert it to system app. I then used nook color tools to choose it as the keyboard. No problems. Well, except for the landscape issue.
Sent from my KFTT using Tapatalk 2
Varlokkur said:
So I rooted my device in order to try again to get Swype installed. I followed your instructions, however immediately after enabling Swype Beta in the Nook color tools, I get a message that Swype Beta has closed. This repeats every few seconds. Is this the force close error you mentioned? What do you mean by "go back to system/apps and reinstall swype"? I tried deleting the swype-input apk from system/apps and reinstalling the swype beta apk, but it led to the same result. Any advice?
Click to expand...
Click to collapse
The same on me with Perfect keyboard.
With all steps repeated 10 times ... after first FC reinstall Perfect KBD from system/app. Everithing is OK till next reboot....again FC.
Last time I have tried to copy so lib in system/lib, but no progres - after restart the result is FC.
Related
clemmie said:
Easy Install Instructions:
*MUST BE ROOTED W/ TITANIUM BACKUP and CWM INSTALLED*
1. Go to https://beta.swype.com/android/create/ and register for the beta
2. Wait for email confirmation and follow steps to do so
3. In Titanium Backup, look for and uninstall Swype
4. Reboot into Recovery Mode and clear Dalvik Cache and Cache Partition Edit: or go into Root Explorer or other root file explorers, and delete /system/lib/libSwypeCore.so
5. Reboot Phone
6. On your phone, go to https://beta.swype.com/android/get/ and download the updated installer. When it downloads, open it and log in
7. Choose the Full version or the English/Spanish version
8. Start Swyping!
Hope that helps.
Click to expand...
Click to collapse
10 char 10 char 10 char
You will have to remove it via Titanium Backup. If it still fails to install the APK you'll have to manually log into via adb (or use a terminal emulator) and remove the following:
/system/apps/Swype
/system/lib/libSwype*
That should do the trick. I've just installed a 2.6.x today on my Cappy and it's very nice.
Hi:
I tried to remove via Titanium, that did not work. So, I used Root Explorer and deleted the 2 files. Install was still unsuccessful. So, I used ADB to try to remove, and it says No such file or directory.
Even though I had Swype backed up with Titanium, it will not allow me to restore it, and I am completely unable to install a newer version.
I have searched and can't seem to find the stock Captivate Swype to try to reinstall it.
Any suggestions? I am desperate.
Thanks!
Use root explorer to copy over the existing files
newter55 said:
Use root explorer to copy over the existing files
Click to expand...
Click to collapse
newter:
You are my hero! You're suggestion worked perfectly. Thanks SO much!
Sent from my SAMSUNG-SGH-I897 using XDA App
Not a problem...glad it worked. Sometimes people make things more difficult than they need be.
Could somebody post a short step-by-step on how to do this?
I need some help.
I used root explorer to look for the
/system/apps/Swype
/system/lib/libSwype*
files.
I found the libSwypecore file, but i didn't have any Swype files in /system/apps.
I deleted that file after uninstalling Swype using Titanium Backup. No success and I'm confused about what you mean by copying over the files using with root explorer. When I try to install my new version of swype, it asks if I would like to still install it since it's a system app (I'm guessing Swype is still recognized as part of the system). Then...it says it's unsuccessful.
Also, I can't restore for some reason since Titanium Backup doesn't have the option anymore
Where do you go to download the new Swype?
I have 2.4 currently.
Sent from my Captivate.
No one?
Sent from my Captivate.
I'd like to get this as well. They now have a double-tap to correct words!
MikeyMike01 said:
No one?
Sent from my Captivate.
Click to expand...
Click to collapse
2.6.48.....from axura...but I think docs have updated swype as well?...not 100% sure, dont know of a direct download, might be due to the porting it to other devices and xda crackdown on swype downloads
Sent telepathically using vulcan mind meld app.
I believe the beta is 2.10. I haven't found an easy way to download 2.10 as it is only made available to Sywpe beta users and they aren't taking any more applicants at the moment.
I'm really hoping they make 2.10 more available soon...
MikeyMike01 said:
Where do you go to download the new Swype?
I have 2.4 currently.
Sent from my Captivate.
Click to expand...
Click to collapse
I've downloaded a modified version somewhere and I deleted system/lib/libSwypeCore.so and also deleted the other two swype components via TiBu. Rebooted and installed the 2.10 apk fine
Also di11igaf's 2.0.1 rom has swype 2.10 in it
So, I uninstalled with Titanium Backup, deleted /system/lib/Swypecore.so. Rebooted my phone
Now, when i try to install the new Swype version, it initially says
"Replace application
The application you are installing will replace another application. All previous user data will be saved."
Ok and Cancel are my two options
I choose Ok of course, try installing and it says Application not installed.
From what I can tell, it seems like the stock Swype is somehow still recognized?
Edit: Nevermind, I got it working. I pushed/copied the files over.
Installed swype 1.60 version (many language packs including Dutch that I needed) by using the copy paste method. Uninstalling via titanium and removing any swype trace and then trying to install it by tapping the .apk didn't work, it just said install not succesful. Sideloading it via Android Central Sideload Wonder Machine gave me an error stating I did not have enough space (i have more than enough), oh well, at least the copy paste method worked. Renamed the 1.60 swype file to Swype.apk and put it in system/app/ and rebooted and worked... Thanks for the help, can finally (looked for a long time) now swype in dutch!
I tried to install and failed
Everybody here talks about "I copied over and it worked"
What do you copy and over what? Could you be more specific?
Just google swype beta and sign up for it and follow the instructions there.
Hi:
Does anyone have the original swype version found on the captivate? I updated it to a newer version some time ago, with help from this thread, but now (starting today) I am getting a message saying that my trial is over, and the "swype" feature is no longer working.
Please help.
Thanks!
UPDATE: I have found several other versions of swype, and uninstalled, and installed several. I seem to be having the same results. They all install, but the"swype" feature doesn't work, only regular typing works. I still have not found the original Captivate version.
Any thoughts?
Thanks again!
UPDATE: Okay, so I uninstalled all Swype using Titanium, then I went to the Swype website, signed up for the beta, and installed. Voila, it's working perfectly now I just hope this version doesn't eventually give the trial is exipred version eventually.
Will the latest beta install on our SGS, or is Swype only updatable why rom updates?
the latest swype beta looks much better than what we have on ur SGS....anyway to update to that?
I would like it too
Sent from my GT-I9000 using XDA App
I hope so. My Swype is rubbish since upgrading to FroYo. It never seems to find the correct word even tho im ultra careful when swyping! Never had so many problems when I was on Eclair version...
Ok, I managed to get rid of the built in Swype and replaced with the latest Swype beta.
Currently it's version Swype v2.10.52.13753 iirc. You should be able to find it with Google.
Also, u need Titanium Backup or SystemApp Remover, or whatever app you know can uninstall system apps. A filemanager that can delete system files is also needed, like Root Explorer.
I'm using Titanium Backup (the free version should be work fine).
1) First change to another keyboard to be safe.
2) Press the Backup/Restore tab at the top, scroll to Swype. Click on it.
3) To be safe, make a backup of Swype. Then Wipe Data and Delete it. It should be dimmed and marked out after deletion.
4) Using Root Explorer, delete \system\lib\libSwypeCore.so. To be safe, make a copy of it to ur sdcard in case anything goes south.
5) Reboot.
6) Now you should be able to install the latest Swype beta without any problems, you will need to enable it in settings after that to use it.
Did not experience any force closes or quirks so far....hope it works for u guys too. In case of any problems, going backwards to restore libSwypeCore.so and Swype via Titanium Backup shouldn't be too hard.
kenkiller said:
Ok, I managed to get rid of the built in Swype and replaced with the latest Swype beta.
Currently it's version Swype v2.10.52.13753 iirc. You should be able to find it with Google.
Also, u need Titanium Backup or SystemApp Remover, or whatever app you know can uninstall system apps. A filemanager that can delete system files is also needed, like Root Explorer.
I'm using Titanium Backup (the free version should be work fine).
1) First change to another keyboard to be safe.
2) Press the Backup/Restore tab at the top, scroll to Swype. Click on it.
3) To be safe, make a backup of Swype. Then Wipe Data and Delete it. It should be dimmed and marked out after deletion.
4) Using Root Explorer, delete \system\lib\libSwypeCore.so. To be safe, make a copy of it to ur sdcard in case anything goes south.
5) Reboot.
6) Now you should be able to install the latest Swype beta without any problems, you will need to enable it in settings after that to use it.
Did not experience any force closes or quirks so far....hope it works for u guys too. In case of any problems, going backwards to restore libSwypeCore.so and Swype via Titanium Backup shouldn't be too hard.
Click to expand...
Click to collapse
thanks! your method worked well for me. i was looking for the swypecore but forgot where it was
Could you please provide a link for the latest swype beta ?
What changes does the beta bring?
Prasad007 said:
Could you please provide a link for the latest swype beta ?
Click to expand...
Click to collapse
Like way, same question!
Great guide!
Thanks!
pramathesh said:
Like way, same question!
Click to expand...
Click to collapse
http://fs536v2d13.fileserve.com/dl/...131/Swype.WVGA.2.10.52.13753-cracked-beta.apk
natsirt789 said:
http://fs536v2d13.fileserve.com/dl/...131/Swype.WVGA.2.10.52.13753-cracked-beta.apk
Click to expand...
Click to collapse
Link not working for me... Easy share maybe ?
marv101 said:
I hope so. My Swype is rubbish since upgrading to FroYo. It never seems to find the correct word even tho im ultra careful when swyping! Never had so many problems when I was on Eclair version...
Click to expand...
Click to collapse
I found that and 'fixed' it by going to 'Settings > Locale and Text > Swype'
Then when in Swype options, open the speed vs accuracy option and slide the bar all the way to the right to the 'Error Tolerance' side of the slider...this made a significant difference for me.
Prasad007 said:
Link not working for me... Easy share maybe ?
Click to expand...
Click to collapse
Try this one
http://www.filesonic.com/file/31850775/
My phone got stuck at the S logo screen the first time I installed this. I was forced to do a factory reset which fixed the issue, but all was lost
kenkiller said:
Ok, I managed to get rid of the built in Swype and replaced with the latest Swype beta.
Currently it's version Swype v2.10.52.13753 iirc. You should be able to find it with Google.
Also, u need Titanium Backup or SystemApp Remover, or whatever app you know can uninstall system apps. A filemanager that can delete system files is also needed, like Root Explorer.
I'm using Titanium Backup (the free version should be work fine).
1) First change to another keyboard to be safe.
2) Press the Backup/Restore tab at the top, scroll to Swype. Click on it.
3) To be safe, make a backup of Swype. Then Wipe Data and Delete it. It should be dimmed and marked out after deletion.
4) Using Root Explorer, delete \system\lib\libSwypeCore.so. To be safe, make a copy of it to ur sdcard in case anything goes south.
5) Reboot.
6) Now you should be able to install the latest Swype beta without any problems, you will need to enable it in settings after that to use it.
Did not experience any force closes or quirks so far....hope it works for u guys too. In case of any problems, going backwards to restore libSwypeCore.so and Swype via Titanium Backup shouldn't be too hard.
Click to expand...
Click to collapse
Your method worked perfectly for me! Thanks a lot! Im using it on a i9003 btw...
Seems good to use, like the voice input on this though! Comes in so handy, the pre-installed one didn't have this feature... So far so good, Only I prefered the darker color of the original one, Can this be themed?
another way good for noobs like me....
I managed to get the most current release version working in a more elementary fashion:
1. Uninstall swype as described in previous posts
2. Go to beta.swype.com
3. Register for the download
4. Follow the install guide beta.swype.com/android/welcome/detailed/
Note: make sure you have the standard android internet browser set as your default before following the email link, if it isn't, the download won't work and you will have to delete/uninstall all swype related files again. To set the browser default, go to settings/applications/manage apps/ then scroll to your current browser (for me skyfire), click on it and then select 'clear default'
And after completing all the prompts in the install guide, all should be good! Latest version 3.6.84.26668.t100.26701 just installed and working great for me. Hope this helps, and enjoy not having that freakin irritational "hidden word" tip ever again!
I downloaded the newest Swype beta and installed it ok, but when I try to swype it says "The Swype package you installed is configured for another device and will operate with limited functionality. Please contact Swype about this issue." I can type individual letters though.
Anyone else having this problem?
I'm running Tazz Froyo 5 right now btw. Thanks in advance for any help!
dhbdhb2000 said:
I downloaded the newest Swype beta and installed it ok, but when I try to swype it says "The Swype package you installed is configured for another device and will operate with limited functionality. Please contact Swype about this issue." I can type individual letters though.
Anyone else having this problem?
I'm running Tazz Froyo 5 right now btw. Thanks in advance for any help!
Click to expand...
Click to collapse
Someone I know had this same issue on an Eris running KaosFroyo (V38 I think) and just ended up going back to the older version. The only advice I can give is you go back to the older version as well.
I've had this issue before. Can't remember how I fixed it though >.<
Have you tried reinstalling with autokiller/taskkiller off?
This happens to many people every time they update. Go into settings and uncheck Swype. Uninstall Swype and the Swype installer. Reboot Phone. Then redownload Installer and install all over again. It should work. Swype recommends clearing your home screens of all widgets too before the reinstall but I have never had to do that. Good luck.
bryanintransit said:
That happened to me also. I had to uncheck swype from the keyboards menu, uninstall swype and the installer, go to the downloads folder and delete any previous swype download files. Then make sure you are installing to internal memory in the cyanogen applications menu. After that i rebooted and went through the installer download and install and the swype download and install. After you install swype wait a second or two for the web browser to reappear and an option to enable swype should pop up. Part of my problem was that I was moving the apk to my system\app folder before it was installed.
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
What do you mean wait for browser to come up?
After I download and install from the installer, it apparently installs then goes to the done screen. Is the browser supposed to come up after? Or do i need to press done first? If I press done I get an error that swype is already installed, which I'm sure nothing is, and it doesn't work after. It looks like it might be a known bug on swypes forum.
This is what happens every time I try to use the installer and why I always have to install a hacked version. Guess I'll just have to wait for a hacked one of the new version...
Sent from my nonsensikal froyo using Tapatalk
That happened to me also. I had to uncheck swype from the keyboards menu, uninstall swype and the installer, go to the downloads folder and delete any previous swype download files. Then make sure you are installing to internal memory in the cyanogen applications menu. After that i rebooted and went through the installer download and install and the swype download and install. After you install swype wait a second or two for the web browser to reappear and an option to enable swype should pop up. Part of my problem was that I was moving the apk to my system\app folder before it was installed.
Sent from my FroyoEris using XDA App
How I fixed it was to unchecked the swype keyboard in the language menu uninstalled it then wiped the swype installer information
Sent from my ERIS using XDA App
I tried everything under the sun to get the installer to work, nothing does. It looks like this is a known issue with swype and there is no work around for me.
I just found the new version floating around google and used that one.
Sent from my nonsensikal froyo using Tapatalk
This comes straight from one of the Swype reps on their beta forums.
For anyone getting the “Configured for another device” error, please make sure that when you hit “Done” after Swype finishes installing, you wait for the “Enable Swype” window to appear.
DO NOT press the “back” button when you see the “Start Download” button again. The license file is being generated at the time, and exiting the installer will kill the license download.
I had this exact same problem, and this fixed it immediately.
That doesn't work for me. Either hitting the back button our done button results in the same error. Swype is already installed. Once I enable swype, then I get the configured for another device error. Is apparently a known issue with no work around and why I always just use unofficial copies. Less hassle.
Sent from my nonsensikal froyo using Tapatalk
MJL99 said:
That doesn't work for me. Either hitting the back button our done button results in the same error. Swype is already installed. Once I enable swype, then I get the configured for another device error. Is apparently a known issue with no work around and why I always just use unofficial copies. Less hassle.
Sent from my nonsensikal froyo using Tapatalk
Click to expand...
Click to collapse
what i did was went in to astro and went into the titanium backup folder and deleted everything with swype in it. Then went into settings and unchecked the "unknown sources" checkbox in apps then downloaded the latest swype via the downloader and it worked.
It IS Lupus said:
what i did was went in to astro and went into the titanium backup folder and deleted everything with swype in it. Then went into settings and unchecked the "unknown sources" checkbox in apps then downloaded the latest swype via the downloader and it worked.
Click to expand...
Click to collapse
I have no idea how you managed that. If I uncheck unknown sources in the applications menu it does not allow me too load the installer because its not from the market.
I have also used root explorer to eliminate every trace of swype off my system and sd card to no avail.
Sent from my nonsensikal froyo using Tapatalk
MJL99 said:
I have no idea how you managed that. If I uncheck unknown sources in the applications menu it does not allow me too load the installer because its not from the market.
I have also used root explorer to eliminate every trace of swype off my system and sd card to no avail.
Sent from my nonsensikal froyo using Tapatalk
Click to expand...
Click to collapse
Once the installer is installed uncheck unknown sources.
Sent from my ERIS using XDA App
Did you restart the phone after you uninstalled everything. that was my issue. After the install on had to restart also for full functionality (the mic)
Sent from my ERIS using XDA App
It IS Lupus said:
Once the installer is installed uncheck unknown sources.
Sent from my ERIS using XDA App
Click to expand...
Click to collapse
Hmm...I tried this with the new 2.15 version of swype out and it still wouldnt let me install without unknown sources checked. funny tho, the new version installed just fine so now a legit copy of swype is finally running on my phone.
where to get Swype
Any one have any idea as to where I can get a swype keyboard now?
ham3one said:
Any one have any idea as to where I can get a swype keyboard now?
Click to expand...
Click to collapse
Not from xda. The thread will be closed if someone posts the swype apk.
Sent from my HERO200 using XDA App
google search for swype with most recent version number and you will probably find something.
MJL99 said:
google search for swype with most recent version number and you will probably find something.
Click to expand...
Click to collapse
What's the most recent version. I'm on 2.4.44 and it's expired.
jadesdan said:
What's the most recent version. I'm on 2.4.44 and it's expired.
Click to expand...
Click to collapse
Most recent is "Swype 2.15.56.14870". (They consider 15 higher than 4 even though it's after a decimal point.)
Skyraider hooked this up for us. No need to change build.prop or do anything besides install it. Using Calkulin's and I needed to push it using adb but it works great.
MOD EDIT: Swype not allowed
Tried and I can't check the box to choose it.
07aspenx said:
Tried and I can't check the box to choose it.
Click to expand...
Click to collapse
You can either copy and paste the apk into system/app if you have root explorer or
you are going to have to push it to the system/app folder using adb. Not sure how to use adb, use the guide in this thread. http://forum.xda-developers.com/showthread.php?t=827209
Added the apk in system/app and still no go. I see it under the language & keyboard but when I choose it I still see the default keyboard.
Sent from my GTablet-TnT-Lite using Tapatalk
I installed it on my Vegan-Tab using the original method (not this method). Worked great, no ADB needed or this prop file you are talking about. I still need to get used to it.
I don't want to get in trouble for posting directly, but if you do a google search it's pretty easy to find.
running TNT 4.2+
did the root explorer method. set the permissions, did the reboot, but now I get force close every time I choose Swype..
running TNT 4.2+
did the root explorer method. set the permissions, did the reboot, but now I get force close every time I choose Swype..
Did it through root explorer on caulkin's, shows up but unable to select it.
Prefect. Thank you!!!!
Running vegan tab and just down loaded the .apk. Clicked on the download and installed it from there.
Last night I was messing with trying to install it through the swype beta program. I entered the beta when I picked up my evo last year. The installer put a version on the tab but the actual swype part did not work. Maybe you need to have the swype installer to install this apk directly and work.
Thanks again op. Using it right now to type this.
I've tried installing several keyboards in tnt and I got the same problem with it being able to instal but not being able to select it. I switched my rom to gAdam and now I am able to install swype and other keyboards without issue. It has to be something in tnt that doesn't like other input interfaces to be used. Hope someone can figure out why. I actually like tnt gui.
ohmyword said:
I've tried installing several keyboards in tnt and I got the same problem with it being able to instal but not being able to select it. I switched my rom to gAdam and now I am able to install swype and other keyboards without issue. It has to be something in tnt that doesn't like other input interfaces to be used. Hope someone can figure out why. I actually like tnt gui.
Click to expand...
Click to collapse
I think you are right. I have tnt now and swype fc's. I tried Vegan and swype worked just fine, but I couldn't install Gaaps so I went back to tnt.
I used the method in the OP, used Root Explorer to put the .apk into system folder and set permissions, then pressed it to let it install, rebooted (I remember I always have to reboot my nook color to get such things working). I fired up an editor program (Ted), long-pressed the text area to get the "choose input method", selected swype, works great. BTW, I'm running TNT 4.4. No FC's so far.
Awesome!
I'm running VEGAn-Tab (Froyo) and all I did was copy the apk to a folder that I created for programs, browsed to that folder on the G, selected the apk, pushed Install, and working perfect!
Tried it again and it worked with long pressing in a text editor. Thanks.
Worked perfectly. Using it right now!
Sent from my VEGAn-TAB using Tapatalk
dwhisent said:
I used the method in the OP, used Root Explorer to put the .apk into system folder and set permissions, then pressed it to let it install, rebooted (I remember I always have to reboot my nook color to get such things working). I fired up an editor program (Ted), long-pressed the text area to get the "choose input method", selected swype, works great. BTW, I'm running TNT 4.4. No FC's so far.
Click to expand...
Click to collapse
I downloaded the OP's file, used root explorer to move into /system/app and set permissions to rw-r-r and then installed swype and ted (text editor). Then I rebooted. After reboot, I opened ted and long pressed in TED to choose input method and swype was available. Swype is working 100% with no force closes yet.
glad people are getting it working
I didn't go through everything I did but I figured people could get it working. Thank skyraider
arsenik13 said:
I downloaded the OP's file, used root explorer to move into /system/app and set permissions to rw-r-r and then installed swype and ted (text editor). Then I rebooted. After reboot, I opened ted and long pressed in TED to choose input method and swype was available. Swype is working 100% with no force closes yet.
Click to expand...
Click to collapse
Could you give some details on the permissions needed?
Wooter here, and I am loving this G Tablet! Thanks a lot for getting us Swype, the real easy way.
I'm using VEGAn-TAB 5.1 and it is working flawlessly.
My family laughs at me when I call the G-Tablet my "Droid XL".
Thread closed, as swype is not allowed as a standalone apk, or for a phone/tablet that does not ship with swype. Thank you.
I've got a real issue here in that I was able to get Swiftkey 3 Tablet installed on a new 8.9 but it is misbehaving and continues to crash and respawn in an endless loop. I have a few seconds in between crashes to navigate around the device and I have tried several things to no avail.
I cannot Force Stop the service. I cannot switch to the default keyboard as there does not appear to be a menu item available for this. I've tried uninstalling but that fails. I've also tried resintalling but it stay in the same state.
Does anyone have experience with forcing the service to stop respawning and to switch the setting back to the default keyboard. If I cannot resolve this issue I will most likely have to reset the device which will cost me many hours in lost time.
Thanks in advance for any ideas.
I was able to find a utility on this forum that exposed the Language and Keyboard settings so that I could access the default keyboard again. This eliminated the crash loop. However, I still cannot uninstall Swiftkey. Any ideas?
Did you try to uninstall it with titanium backup?
Sent from my rooted Kindle Fire HD
swiftyjpow said:
I was able to find a utility on this forum that exposed the Language and Keyboard settings so that I could access the default keyboard again. This eliminated the crash loop. However, I still cannot uninstall Swiftkey. Any ideas?
Click to expand...
Click to collapse
What utility did you use?
Sent from my KFJWI using Tapatalk 2
swiftyjpow said:
I've got a real issue here in that I was able to get Swiftkey 3 Tablet installed on a new 8.9 but it is misbehaving and continues to crash and respawn in an endless loop. I have a few seconds in between crashes to navigate around the device and I have tried several things to no avail.
I cannot Force Stop the service. I cannot switch to the default keyboard as there does not appear to be a menu item available for this. I've tried uninstalling but that fails. I've also tried resintalling but it stay in the same state.
Does anyone have experience with forcing the service to stop respawning and to switch the setting back to the default keyboard. If I cannot resolve this issue I will most likely have to reset the device which will cost me many hours in lost time.
Thanks in advance for any ideas.
Click to expand...
Click to collapse
Factory reset?
jmoak said:
What utility did you use?
Click to expand...
Click to collapse
It's called NookColor Tools but works with Kindle Fire HD as well.
http://forum.xda-developers.com/showthread.php?t=868366
ayaxxa said:
Did you try to uninstall it with titanium backup?
Click to expand...
Click to collapse
Thanks for the tip. I tried to uninstall with Titanium backup and it did not appear to work. However there was then an uninstall button available in the Installed Applications menu and I was able to get it uninstalled.
This may have also appeared because when I did a reboot an update was applied which appears to have reset some things. One of the things that has changed is that all of the apps that I side installed or installed through the Play Store have disappeared from the Apps menus. It's not an issue since I have Nova Launcher installed and everything still shows in there.
So the issue with getting Swiftkey to work properly still remains and I sure am having withdrawl from not having this app. If anyone has any ideas or a procedure on how to get that to work it would really be helpful.
But I cannot customize Nova apparently and add icons to the desktops. What a pain. Still looking for solutions to get this all running smoothly.
i managed to get it working after finding this instruction http://blog.wuepics.de/2012/11/swiftkey-auf-dem-kindle-fire-hd/#axzz2GznJiTxt
unfortunately it is in german but the gist of it is
install swiftkey (via play store or side loading?)
find the apk file (data/app likely)
using es explorer click and hold the apk file until you see the options
select view
go into the lib folder > armeabi-v7a
extract libswiftkeysdk-java-internal to somewhere you ll find it (download folder...)
copy the extracted .so file in lib/armeabi-v7a to system/lib
copy app from data/app to system/app
click to install in system/app (not sure if needed, i did any way. sorry i am kindle/android noob )
change permissions to user read/write, rest read only (same permission as the other apps)
reboot kindle
go to keyboard settings, select swiftkey3
no more crashes.
unfortunately the kindle menu overlaps the keyboard a little bit in landscape mode. but to me that is just a minor inconvenience.
hope this helps.
okarr said:
i managed to get it working after finding this instruction http://blog.wuepics.de/2012/11/swiftkey-auf-dem-kindle-fire-hd/#axzz2GznJiTxt
unfortunately it is in german but the gist of it is
install swiftkey (via play store or side loading?)
find the apk file (data/app likely)
using es explorer click and hold the apk file until you see the options
select view
go into the lib folder > armeabi-v7a
extract libswiftkeysdk-java-internal to somewhere you ll find it (download folder...)
copy the extracted .so file in lib/armeabi-v7a to system/lib
copy app from data/app to system/app
click to install in system/app (not sure if needed, i did any way. sorry i am kindle/android noob )
change permissions to user read/write, rest read only (same permission as the other apps)
reboot kindle
go to keyboard settings, select swiftkey3
no more crashes.
unfortunately the kindle menu overlaps the keyboard a little bit in landscape mode. but to me that is just a minor inconvenience.
hope this helps.
Click to expand...
Click to collapse
That doesn't seem to do anything for me. Each time my kindle reboots, I have to go to system\apps and reinstall Swiftkey in order to get it to work. If I don't, I'll get keep getting that error msg "****key Tablet has stopped"
Has anyone figured a solution to this?
Translated from German to English.
vanizial said:
That doesn't seem to do anything for me. Each time my kindle reboots, I have to go to system\apps and reinstall Swiftkey in order to get it to work. If I don't, I'll get keep getting that error msg "****key Tablet has stopped"
Has anyone figured a solution to this?
Click to expand...
Click to collapse
After I read the response that the link was ONLY in German, I went to that site, and allowed my pc to translate it into English. This is what
I found:
In order to perform these steps is root access required.
Instructions
1 Charge here "NOOKcolor Tools" and installs it on the KFHD
2 Now go download your desired Tastaturapp on the Kindle.
3 Now open your file browser on the KFHD (eg ES Explorer )
4 Examined the copied in step 2 Tastaturapp
5 Keep it pressed to the apk., And choose "view"
6 Opens the "lib" folder
7 Opens the armeabi-V7A folder and select the . "so" file (!) from.
8 Click on "Extract". You possibly can you choose the path.
9.Geht now to the folder where you . "so" you extracted files and copy all the files into the / system / lib directory
10 Installed . "apk" the Tastaturapp and copied the . "apk" from the / data / app folder to / system / app Verzechnis
11.Startet the KFHD and opens new NOOKcolor Tools.
12th Now you can your keyboard to select under "Select Keyboard".
13th Ready!
Have fun with it
Please note that it is at your own risk and I take no responsibility for damaged equipment
This entry was posted KFHD Root & Mod , Kindle Fire HD and tagged Kindle Fire HD tagged on3 November 2012.
Now is it reliable? I don't know, but if you pay attention to the FIRST LINE, it states ROOT ACCESS IS REQUIRED. I have not rooted my Kindle Fire HD 7", so I can't try it out. But for those who have rooted their Kindle Fire, maybe you can try this. The site I had translated, http://blog.wuepics.de/2012/11/swiftkey-auf-dem-kindle-fire-hd/#axzz2GznJiTxt, is the site that was given. Good luck if you try it. ffman2152