Related
Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
Okay i was out in the rain the other day and my Diamond was in my pocket.
Ever since my power button has stopped working. I guess my phone got wet somehow...
Now i always get the " Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
It just keeps popping up every minute or so it and wont bloody go away.
My power button wont turn the phone off/on or even lock my phone. So I'm guessing it's dead.
I'm guessing there is a part in the phone I can replace to fix this. Can one of you gurus point me in the right direction on which part I would need to buy?
I'm from the UK..
Thank you in advance.
Little bit of an update. My battery died last night. So I put it on charge when I woke up.
I obviously had to use the power button to turn it on. And for some strange reason it worked!
But It wont allow me to lock my phone when it's turned on. And i also get the same issue with the message popping up as I posted above. Could anyone help
anybody know what part i would need to fix this?
i noticed recently that if i press the power button, it sometimes takes a really long time to turn the screen on. i know the hardware works because the backlight in the soft buttons turns on immediately, but the screen remains black for up to 10 seconds. this happens rarely. however, im fairly sure it isnt a software problem because ive wiped completely and installed a fresh rom and the problem seems to persist. perhaps i just recently noticed, and the problem was always there? does anyone else have this problem?
three threads above yours.
http://forum.xda-developers.com/showthread.php?t=681723
could be a hardware issue.
Mine does this every few days.. I am still on the stock 2.1 rom.
Mine also does this, I only noticed it after flashing Cyanogenmod 5.0.6. so I thought it might have been a bug. I also assumed it was a bug because the phone seems to act strangely when you are touching the screen and try to hit the power button.
Hopefully this isn't a hardware issue, I've had the phone since release.
Is anyone else experiencing similar issues?
It happens to me as well, but very infrequently. Maybe every few days... so it doesn't bother me enough to worry about it.
I'm on stock ROM btw.
I am leaning towards thinking this may be software related. A few minutes ago I was at the lock screen and tried about 50 times (yes I waited long enough after each press) and simply could not get the screen to turn off. I then tried long pressing the power button and, sure enough, each time it would bring up the shutdown menu (yes, over the lock screen). Must be a bug right?
Hmm, my problem's slightly different. Around half of the time, I have to press the power button twice to turn the screen on. Sometimes, pressing it the first time doesn't turn the screen on, had to press the power button firmly again.
This started only recently. On stock n1 and bought it during feb.
that means that your power button is dying, like many others' (including mine)
this is the first time, it takes 2 clicks to work....than it will increase.
Expect a repair soon...
Well i am having the issue other way around. i am not been able to put my phone in stand by mode by clicking on it and it is do a hard press then i get options to shut off the phone
any suggestions what might be causing it ?
I'm happy I haven't received this problem yet
-------------------------------------
i want my yogurt lol froyo time
negroplasty said:
Mine also does this, I only noticed it after flashing Cyanogenmod 5.0.6. so I thought it might have been a bug. I also assumed it was a bug because the phone seems to act strangely when you are touching the screen and try to hit the power button.
Hopefully this isn't a hardware issue, I've had the phone since release.
Is anyone else experiencing similar issues?
Click to expand...
Click to collapse
I am having the same issue and i wonder if you were able to find the cause for it. I have the same rom as you do on your phone
negroplasty said:
I am leaning towards thinking this may be software related. A few minutes ago I was at the lock screen and tried about 50 times (yes I waited long enough after each press) and simply could not get the screen to turn off. I then tried long pressing the power button and, sure enough, each time it would bring up the shutdown menu (yes, over the lock screen). Must be a bug right?
Click to expand...
Click to collapse
I have a similar problem. When I unplug the N1 from the charger, the screen comes on showing the lock screen, and I can't get it to turn off. If I unlock the phone, however, then the power button works normally. I don't think it was doing this until recently (I bought it in January the first day it was offered and am running the stock update1 ROM).
So here is my theory if the power button is a problem then it needs to act up both ways and not only one way. right now i can put the phone in sleep mode but i can wake it up. i will post the issues on the development forum and might be able to find an asnswer to it
So seems like the issues is because of Cyanogenmod 5.0.6 because since i have flashed another rom it is working just fine. i will be doing some more testing before i can be certain
Another problem I am experiencing is when I long press the power button, it pulls up the phone options menu but also turns off the screen. It's extremely frustrating as it does this quite frequently; right after I power on the screen again and unlock the device it works properly every time - so much so that I am convinced this is a software issue.
I am now running froyo, rooted with Cyan's minor root patch. I can also say for sure I experienced the same problem on CM 5.0.6, but it definitely occurred less frequently.
Am I alone here?
di2356 said:
i noticed recently that if i press the power button, it sometimes takes a really long time to turn the screen on. i know the hardware works because the backlight in the soft buttons turns on immediately, but the screen remains black for up to 10 seconds. this happens rarely. however, im fairly sure it isnt a software problem because ive wiped completely and installed a fresh rom and the problem seems to persist. perhaps i just recently noticed, and the problem was always there? does anyone else have this problem?
Click to expand...
Click to collapse
I just started having this problem after upgrading to 2.2.
I have this every so often. But sometimes wonder if it is flyscreen doing it
You guys should all just be running the app no lock to take the power autumn out of the equation.
Ahhhhh! I just need trackball wakeup!
I have a similar issue where my screen will turn on but will be unresponsive. When i turn it on and off, the backlight jut comes and goes. If it times out it won't turn back on for a bit(the backlight will come on still).
I just wiped my phone, hoping that'll fix it since it only started happening on a regular basis since I updated to Froyo
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
ok good, me too!
was just looking for this topic.
mine doesnt always turn anything on at all. sometimes the light go on, others nothing. Also trying to turn off the phone is hard as it sleeps straight away with out opening up the power menu.
I have a stock N1, which recently updated to Froyo, with the same problem.
any ideas would be great!
cheers,
lorin.bute said:
I have a similar issue.
Sometimes just the capacitive buttons light up and not the screen. I have to make 2 or 3 tries to get it to turn on. Its rare, but its there. It only happened on 2.2.
Click to expand...
Click to collapse
Also happens on CM 5.0.7.1.
i think it may be a hardware button issue.
I have tried turning mine off (had to pull the battery out) and then to turn it on.
It should turn on readily as it has nothing to do with the OS at that point.
any ideas?
No HW button issue described. HW button works - if it didn't, lights wouldn't go on. It's a wrong reaction on the button, at least that's what OP describes (and me too).
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
I've read more than one or two threads on power button issues, and I know what I'm talking about. My power button DOES power up the phone when the battery is taken off the first shot, it DOES wake the phone from standby, it DOES register long presses - there was even one time when a second press was long, and suddenly the screen woke up with power menu, while the first press left it dark with touch button light going on.
Doesn't look even a bit like HW to me. HW would leave the phone dead, non-responsive to touches, or create a loose touch which would translate into several touches - none of those would EVER turn into a phone being on with screen off, and suddenly snapping back to screen on when the SCREEN is touched several times.
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Take your time! As for me, I'm using my N1 for 3 months now for the power button to completely dead with everyday use (I didn't use any app to trackball-wake).
As I said, all the things you are yelling I have been through. And I, too, thought it was software problem.
I tried both MCR and Cya with no hope.
Good luck!
ps: One of my friend just told me about his N1's power button issue right after hearing me telling about mine.
This sucks
anyone know where i can buy a new button??
Corrupt SD Card
I had the same issue. I'd press the power button, the bottom four buttons would light up but no screen wake. Only way to get out of it was to pull the battery. It would happen maybe 30-40% of the time. (Nexus One Froyo FRF72)
I think it was due to a corrupt MicroSD card. I recently installed a 32gb card and put some music on it using songbird and possibly didn't safely remove. That's when I started getting issues. Removed the SD card completely and it worked fine. Changed back to the old card and no issues. Then formatted the 32gb and tried again, worked fine. Then I tried to transfer more music, there was an error and I got the same problem. (Cheap ebay card from Hong Kong, that'll teach me).
Anyway, I'd be interested to know if that solved anyone else's problem, because all I see on forums are that it's a faulty power button, but that didn't seem to be the case in my situation.
Cheers,
Dylan
-Witty esoteric statement about science/technology.
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
jimbobalu said:
Mine is doing kinda the same weird thing but a little different.
When I push the power button the screen comes on but is unresponsive to touch. If I press the power button again the screen dims and then turns off, the home keys light up and then the trackball glows white. The phone then does not respond to the power button for around 10 secs and repeats this behavior 4 or 5 times until it actually starts working correctly and I can swipe my finger to get to the home screen.
It usually does this after being inactive for a period of time, like after sitting overnight.
FRF91
LancherPro Beta 0.6.7.2(maybe the problem?)
Click to expand...
Click to collapse
i have almost the same issue, although mine happened twice when i was on EPE54B but it's been far more common on FRF91
the only difference is my power will continue to turn the back light on and off no matter if the screen has already timed out or not
kobecamp2009 said:
okay so when my n1 is in sleep, it takes like 3 tries to wake it up. The first time I press the unlock button the unlock screen comes and then goes back to sleep instantly. The second time the lights for the back menu home and search light up and that's it. the third time it works. I'm on froyo. anyone else with this problem?
Click to expand...
Click to collapse
I have exactly the same issue. Over in the general forum, there's another thread on this issue. Many, myself included, are reporting that this problem started after the FRF91 update. Can you confirm?
rtx101 said:
Your N1's power button is dying, it's a known HARDWARE issue. I experienced all of that what you may think a software bug, nut dear friends, prepare to meet HTC or Google for warranty. My N1's power button is dead, I couldn't swap for a new one because I bought it in my country where no official distributor for N1 yet. Sad!
ps: you may try to search for "N1 power button" and see there are more and more reports about this problem.
Click to expand...
Click to collapse
Read again carefully. Are you sure your hardware problem was identical to what the OP described? I've noticed a lot of people with obvious hardware problems (i.e., the power button is completely unresponsive) posting on threads like this when they actually have a different problem. It's very confusing.
britoso said:
Could be your cpu was too busy to accept any inputs.
I have a thread about it here:
http://forum.xda-developers.com/showthread.php?t=692874
Click to expand...
Click to collapse
This sounds VERY promising -- thank you britoso!
PS: Are you guys getting the unresponsive unlock slider like britoso describes?
I had this problem when I first flashed CM6 yesterday. Even after wiping and reflashing it was the same. Only way to get out of the black screen was to do a soft reset, power + vol down + trackball. I finally found out that my SD card malfunctioned and was corrupt. I tried reformatting the sd card in an microsd card reader but windows said it could not be reformatted. I finally switched back to another microsd card that was working, wipe and reflashed cm6 and the problem went away. Try backing up all the data on your microsd onto your computer then reformat it and wipe then reflash to see if it works
Edit: ughhhh it just happened again, but not as bad as before, turns back on after second try... maybe i didnt press the trackball hard enough
Greetings.
Today the power switch from my Note stopped working.
I found a website that will replace it for an original Samsung one, but I would like to ask if anyone has a better alternative here on the US.
This is the one I got:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-power-button-repair/
Also, it is weird that now that the power button doesn't work at all, I have to take out the battery to "turn off" the phone. But when I put the battery back on, the phone turns itself on. Is that normal behavior?
Thank you in advance.
if the phone is working as usual, then instead of removing the battery to switch the phone off, use any widget from the playstore to power off the phone. this way it will power off fine. may be its because the power button is messed up.
After 14 days of having the power switch in a nonworking state, today I woke up, and lo and behold, the damn switch started the work again.
Now I can turn off the phone normally, everything is normal now.
I didn't do anything special, nothing at all.
Before, I couldn't turn off the phone even with apps like QuickOff, thats allows the phone to reboot, turn off and etc, so I had to take the battery out every time.
I have no explanation.
You got lucky there :thumbup:
Sent from my GT-N7000 using Tapatalk 2
So, I think it is just because the power button gets sticky. I was having a similar problem, except that it was working intermittently; sometimes it would turn the phone off, sometimes it would bring up the shutdown screen; and sometimes it would work like it was supposed to. Probably yours started working when whatever was making it stick got dislodged. What I did was just press the button REAALLLY hard for a while while the battery was out. It's been about 24 hours and I haven't had any problems yet, fingers crossed. Another guy in a different thread just wiggled it around. Probably if you take the whole board off you could remove the power button and reinstall it or something, though it seems no one has had to go that far yet. Anyway, if anyone else runs into this problem, just mess around with the button until it starts working again. Though, as always, if you break it, its not my fault.