dont install beats installer - Motorola Atrix HD

Tried and now my phone is stuck in the boot animation. I have tried to factory reset and to install the firmware using rsd lite. My battery wont charge and its almost out. Any ideas? Thanks.

Av8tor86 said:
Tried and now my phone is stuck in the boot animation. I have tried to factory reset and to install the firmware using rsd lite. My battery wont charge and its almost out. Any ideas? Thanks.
Click to expand...
Click to collapse
my battery is charging but I am still f'd

All your flashing problems will go away:
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm

mattlgroff said:
All your flashing problems will go away:
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
Click to expand...
Click to collapse
What should I do to fix? Kind of a noob with this thing

How did you try to flash?
Sent from my MB886 using xda premium

Sticks210 said:
How did you try to flash?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!

SirHoover2010 said:
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!
Click to expand...
Click to collapse
Elaborate?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app

SirHoover2010 said:
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!
Click to expand...
Click to collapse
+1, please share in case other users make the same mistake.

darknessrise1234 said:
Elaborate?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
RSD Lite and Fastboot. Got the files from http://forum.xda-developers.com/showthread.php?t=1853522. Also I didn't want to share specifics until we got the OP's phone figured out and fixed, which we did.

That happened to me the other morning it was bad. I used the firmware before the latest update through rsdlite and voila it came back to life! I wish we can use beats installer but sadly we cant. At least we didnt hard brick the device.
Sent from my MB886 using xda app-developers app

Hope this helps
Okay to start off I have bricked my phone through beats installer, I was pretty ticked, as most of you are. I brought my phone back to life and want to put everything I did to do so. I will put everything I did, if it actually helped or not, you would have to ask a Dev. Before I start thanks to Matt for the help.
Okay the first thing I did was go into recovery and wipe EVERYTHING (including cache)
I then attempted to flash the software from my sd card (I was desperate and had no idea what to do lol)
After a little more reading and finally getting my phone to charge (i wanted to let it charge for a while) I found out about RSD Lite (http://www.tucows.com/preview/853731)
I booted into my bootloader (fastboot) and connected to my computer. I had already opened RSD Lite and it recognized my phone. I then selected the software for my phone I found on a thread here (http://forum.xda-developers.com/showthread.php?t=1853522) and started the process. It around 10 min, so be patient.
A guy I talked to did the exact same thing for at least 2 hours and it finally went through. Keep at it and don't give up, hopefully this will help you get your phone working again

SirHoover2010 said:
Okay to start off I have bricked my phone through beats installer, I was pretty ticked, as most of you are. I brought my phone back to life and want to put everything I did to do so. I will put everything I did, if it actually helped or not, you would have to ask a Dev. Before I start thanks to Matt for the help.
Okay the first thing I did was go into recovery and wipe EVERYTHING (including cache)
I then attempted to flash the software from my sd card (I was desperate and had no idea what to do lol)
After a little more reading and finally getting my phone to charge (i wanted to let it charge for a while) I found out about RSD Lite (http://www.tucows.com/preview/853731)
I booted into my bootloader (fastboot) and connected to my computer. I had already opened RSD Lite and it recognized my phone. I then selected the software for my phone I found on a thread here (http://forum.xda-developers.com/showthread.php?t=1853522) and started the process. It around 10 min, so be patient.
A guy I talked to did the exact same thing for at least 2 hours and it finally went through. Keep at it and don't give up, hopefully this will help you get your phone working again
Click to expand...
Click to collapse
Still no go, so ill try downloading new firmwares. What rsdlite version do you use? Windows version too?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
---------- Post added at 10:31 PM ---------- Previous post was at 10:22 PM ----------
Booted with BP Tools after another failed attempt and got this.
Edit2: I mean, which Windows are you using? Im on windows 8.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I997 using xda app-developers app

darknessrise1234 said:
Still no go, so ill try downloading new firmwares. What rsdlite version do you use? Windows version too?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
---------- Post added at 10:31 PM ---------- Previous post was at 10:22 PM ----------
Booted with BP Tools after another failed attempt and got this.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.

SirHoover2010 said:
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.
Click to expand...
Click to collapse
I had done the update then rooted, but was trying to flash to remove root to RMA.

darknessrise1234 said:
I had done the update then rooted, but was trying to flash to remove root to RMA.
Click to expand...
Click to collapse
I was updated when I rooted too, make sure you use the version that shipped with your phone.

SirHoover2010 said:
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.
Click to expand...
Click to collapse
Tried first firmware and it fails on the very first part of script.

SirHoover2010 said:
I was updated when I rooted too, make sure you use the version that shipped with your phone.
Click to expand...
Click to collapse
Tried FFW version with a windows 7 computer on rsdlite 5.7 and it failed at first part. Downloading the updated firmware to see if that works.

also remember that you may have to run the software as an admin

theknub said:
also remember that you may have to run the software as an admin
Click to expand...
Click to collapse
Old firmware fails instantly, new firmware fails instantly until edits. After removing getvars, it fails at modem. Remove modem and it fails at system.img.ext4.

Related

Firmware DROID RAZR M Verizon Jelly Bean 4.1.1 by "Firmware Team"

"FIRMWARE TEAM"
Presents:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Jelly Bean Fastboot Files for DROID RAZR M Verizon
Android 4.1.1 ---- 98.12.4.XT907.Verizon.en.US
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml.zip
DOWNLOAD​
Any chance you guys get the Telstra (AUS) firmware or run us Aussies through how to extract one from our devices?
Note we're BL unlockable if that helps.
How can we use this firmware on a retail version, knowing that BL is locked?
Any instructions/description will be greatly appreciated
Thx
safsaf_asm said:
How can we use this firmware on a retail version, knowing that BL is locked?
Any instructions/description will be greatly appreciated
Thx
Click to expand...
Click to collapse
you use this in conjunction with RSD Lite. put the razr m in fastboot mode, run rsd lite, browse for this, and extract & flash it. itll take a bit, but bring you back to fully stock 4.1.1
antp121 said:
you use this in conjunction with RSD Lite. put the razr m in fastboot mode, run rsd lite, browse for this, and extract & flash it. itll take a bit, but bring you back to fully stock 4.1.1
Click to expand...
Click to collapse
What's the benefit of this ROM? Is it an update to the jelly bean already out there?
Sent from my XT907 using xda app-developers app
Benifit is that we can look into the file now instead of OTA or Blind Flashing.
Also if you screw up u can Fast boot flash this Firmware with RDSLite.
Now my question is does any one have the JB AUSSIE Radio 4.1.1 ?
Or will the AUSSIE 4.0.x Radio work in here ?
Aussie radio from ICS works fine with this so far.. will test tomorrow in lte coverage area too.
Sent from my XT907 using Tapatalk 2
Works for me also on Verizon phone.
Still curious if we can get a Australia fast boot. I think theirs maybe less bloated ?
Again thanks for the fast boot files
Germanese said:
Works for me also on Verizon phone.
Still curious if we can get a Australia fast boot. I think theirs maybe less bloated ?
Click to expand...
Click to collapse
There's a tonne of Verizon bloat in these fastboot images that's for sure.. however, much of it is easily removed
Sent from my XT907 using Tapatalk 2
Did a factory wipe, and flashed just boot and system on my Aussie RAZR M.
Everything works except LTE. When it kicks over to LTE it can see the network and connect to it, but the data connection doesn't establish (ie the 4G symbol does not appear and data connectivity doesn't work, despite strong signal in a 4G area).
Any ideas on what may need to be tweaked to get LTE data to work? Data works fine on UMTS.
Sent from my XT905 using Tapatalk 2
apacheo said:
There's a tonne of Verizon bloat in these fastboot images that's for sure.. however, much of it is easily removed
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
So you're saying we can reimage an Telstra phone using the Verizon fastboot then separately pushing the radio fastboot afterwards?
wintermute000 said:
So you're saying we can reimage an Telstra phone using the Verizon fastboot then separately pushing the radio fastboot afterwards?
Click to expand...
Click to collapse
Just flash the system and boot partitions. However, lte doesn't seem to work. Gsm and umts do though.
Sent from my XT905 using Tapatalk 2
In the process of trying to get LTE going, I managed to fry it, so I'm going to have to do a re-install this afternoon. Only shame of it is, I don't live in an LTE coverage area, so I can't test.
So for me, it's a question of do I want smooth jellybean goodness with (at most) DC-HSPA, or do I want ICS with LTE ... grunt, why can't I have both!?
Sent from my Nexus 7 using Tapatalk 2
apacheo said:
In the process of trying to get LTE going, I managed to fry it, so I'm going to have to do a re-install this afternoon. Only shame of it is, I don't live in an LTE coverage area, so I can't test.
So for me, it's a question of do I want smooth jellybean goodness with (at most) DC-HSPA, or do I want ICS with LTE ... grunt, why can't I have both!?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Are you using an Aussie one?
Sent from my XT907 using Tapatalk 2
antp121 said:
Are you using an Aussie one?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Sure am. Unlocked Aussie RAZR M (XT905)
apacheo said:
Sure am. Unlocked Aussie RAZR M (XT905)
Click to expand...
Click to collapse
And its LTE?
Sent from my XT907 using Tapatalk 2
antp121 said:
And its LTE?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Of course it is
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
apacheo said:
Of course it is
Click to expand...
Click to collapse
Having said that it's LTE, I've followed these instructions:
http://forum.xda-developers.com/showthread.php?t=1834511
Apparently this should get LTE working outside the US ... will give it a try when a chance avails.
I still don't get why we need this file because we already had the OTA and that's how I updated my phone through RSD Lite. Forgive me for saying this, but it's just my opinion.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:18 PM ---------- Previous post was at 09:10 PM ----------
Just trying to understand more clearly is all. So I respect anyone who is uploading files ROMs for our phone. I truly believe this is the greatest Android phone on the market today.
Sent from my XT907 using xda app-developers app
alwaysbelieve1 said:
I still don't get why we need this file because we already had the OTA and that's how I updated my phone through RSD Lite. Forgive me for saying this, but it's just my opinion.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:18 PM ---------- Previous post was at 09:10 PM ----------
Just trying to understand more clearly is all. So I respect anyone who is uploading files ROMs for our phone. I truly believe this is the greatest Android phone on the market today.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Simple. For people who have modded their ICS firmware, the OTA won't apply unless they revert to stock first. At least with this, they can flash jellybean, then mod their rom again.
Plus it's also nice to have something to reimage your phone with if you screw it up
camera JB
Are anybody can upload camera and gallery and all additional files from JB?

[Q] XPERIA Z Unresponsive just a red light Tried everything of..URGENT HELP NEEDED :(

Well i just unlocked my bootloader etc and everything was working fine now all of a sudden i tried flashing my first ROM which was the PAC Man rom which i used on my note 2 now well theres no signal s if its a tablet and when ever i flash the rom over and over again it says setting up tablet any one know how i can get around this....? I've tried using PC Companion but because i've obviously got the pac man rom installed it wont let me repair my phone through that method because i m using a custom rom and the flash tool method wont work because it cant find the drivers (probably because it thinks its a tablet).....seriously guys any help here would be appreciated....need to get my phone working before i head out to work in 8 hours time....
Might be worth mentioning now after so much trying out things my xperia is just stuck on a red light.....
Does any one know if i can use fastboot to re install stock firmware it seems to be the only thing thats working for my phone atm....
Ritz89 said:
Does any one know if i can use fastboot to re install stock firmware it seems to be the only thing thats working for my phone atm....
Click to expand...
Click to collapse
turn your phone completely off (hold vol-up + power until you get 3 vibrations) then hold down volume down, and insert the usb cable, this will put the device into flash mode, then use EMMA, FlashTool, or PC Companion to restore to stock.
The red light issue that you are seeing sounds like one of 2 issues, the red light shines like that when the battery is flat and needs to be charged before it can boot, or if you flash an unsigned kernel when the bootloader is locked.
lilstevie said:
turn your phone completely off (hold vol-up + power until you get 3 vibrations) then hold down volume down, and insert the usb cable, this will put the device into flash mode, then use EMMA, FlashTool, or PC Companion to restore to stock.
The red light issue that you are seeing sounds like one of 2 issues, the red light shines like that when the battery is flat and needs to be charged before it can boot, or if you flash an unsigned kernel when the bootloader is locked.
Click to expand...
Click to collapse
If i use PC Companion i get the following message :
Problem :
The phone/tablet contains modified software that cannot be updated.
Details:
Sony Update Engine failure (error 2003).
Whenever i try to use Flashtool it says the drivers arent install which i cant understand because it works perfectly in fastboot any help on this would be appreciated to...
Emma well i tried creating a user and there was no email as of yet waited around 9 hours now?
Update: I seem to have got all the drivers to be working now but Flash tool seems to be getting stuck at thr 3rd point after connecting which is INFO - Reading device information
Any help or ideas would be much appreciated asap.......i've had no sleep because of this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump + Update: installed beta 6 and now i get this in flash tool any ideas?
Try another pc.
Sent from my C6603 using xda premium
gm007 said:
Try another pc.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
just done that now buddy no luck any more ideas anything is better than what ive got atm i even tried using a virtual machine running xp same luck
Did you tried another firmware? Maybe it's corrupted.
Sent from my C6603 using xda premium
gm007 said:
Did you tried another firmware? Maybe it's corrupted.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
i l try that now and get back to u i really appreciate your help btw mate
Ritz89 said:
i l try that now and get back to u i really appreciate your help btw mate
Click to expand...
Click to collapse
And if you can find flashtool beta1 try with.
Sent from my C6603 using xda premium
Ritz89 said:
*snip*
i tried flashing my first ROM which was the PAC Man rom which i used on my note 2 now
*snip*
Click to expand...
Click to collapse
Did you use the pacman rom from the XZ forum or from the Note 2 forum?
gm007 said:
And if you can find flashtool beta1 try with.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
encountered one more problem even tho i got it working this time with a different firmware thanks to ur advice.....but i got this message for flashtool, unknown sources and debugging must be checked in phone settings...i m guessing they musnt be checked at the moment because its been frozen on that screen for around 10-15 mins....any ideas could i possibly use fast boot to enable these settings?
pandaball said:
Did you use the pacman rom from the XZ forum or from the Note 2 forum?
Click to expand...
Click to collapse
Nope i used the one from the xperia z forum.....
Ritz89 said:
encountered one more problem even tho i got it working this time with a different firmware thanks to ur advice.....but i got this message for flashtool, unknown sources and debugging must be checked in phone settings...i m guessing they musnt be checked at the moment because its been frozen on that screen for around 10-15 mins....any ideas could i possibly use fast boot to enable these settings?
Click to expand...
Click to collapse
If the flashtool say successful,dont worry About usb debuging.
Sent from my C6603 using xda premium
gm007 said:
If the flashtool say successful,dont worry About usb debuging.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
i get this i unplugged the device like it said as u can see after waiting a while....but it still doesnt turn on any ideas?
Press and hold power button,or connect the phone to wall charger and see if the charging animation appear,could take several minutes.
Sent from my C6603 using xda premium
gm007 said:
Press and hold power button,or connect the phone to wall charger and see if the charging animation appear,could take several minutes.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
i think the battery might be completely drained as nothing is happening....i l give it 30 mins and report back to you
Ritz89 said:
If i use PC Companion i get the following message :
Problem :
The phone/tablet contains modified software that cannot be updated.
Details:
Sony Update Engine failure (error 2003).
Click to expand...
Click to collapse
You need to RE-lock bootloader to update or reinstall official way with PC Companion or you will get this error.
gm007 said:
Press and hold power button,or connect the phone to wall charger and see if the charging animation appear,could take several minutes.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
i v had it in the wall for like an hour nearly and all i get is a red light when i hold the power button as soon as i let go it turns off is my phone even charging....?

How to Unroot ATT Moto X?

Just rooted my ATT moto x using jcase's method (which was ridiculously easy). Now I'm curious how to unroot in case I get prompted with an OTA in the coming days.
Can anyone shed some light on the easiest way to do this?
Thank you very much.
Sent from my XT1058 using xda app-developers app
Flash stock firmware and recovery with either Rsdlite or fastboot. If you use fastboot you can preserve data.
The firmware is in the Dev section
bajasur said:
Just rooted my ATT moto x using jcase's method (which was ridiculously easy). Now I'm curious how to unroot in case I get prompted with an OTA in the coming days.
Can anyone shed some light on the easiest way to do this?
Thank you very much.
Sent from my XT1058 using xda app-developers app
Click to expand...
Click to collapse
As noted if you want to preserve data, just flash the recovery.img and the system.img from the stock firmware via fastboot and you'll be all set. I did it and works just fine. Be sure to use the firmware file for ATT.
Stupid question in 3...2...1. How do you flash stock firmware without having custom recovery?
Sorry
Sent from my XT1058 using xda app-developers app
@gunnyman already answered your question. You flash using rsdlite or fastboot.
Sent from my XT1058 using Tapatalk 4
Awesome thanks.
Sent from my XT1058 using xda apps developers app
Is this process very difficult? I have been prompted with an OTA and it will not go away.
Any suggestions?
Thanks
Sent from my XT1058 using xda app-developers app
No its easy. Just follow the instructions on the thread about flashing back to stock, but you probably should have already done it. You can just fastboot flash recovery and system without wiping and then reboot. Then accept the OTA.
Sent from my XT1058 using Tapatalk 4
I've always had Samsung devices so I'm used to Odin!
Will be interesting figuring this method out.
Thanks for the help
PS. Can you send me the link to the thread that has the instructions on how to do this? I can't find it searching. Thanks again
Sent from my XT1058 using xda app-developers app
bajasur said:
I've always had Samsung devices so I'm used to Odin!
Will be interesting figuring this method out.
Thanks for the help
PS. Can you send me the link to the thread that has the instructions on how to do this? I can't find it searching. Thanks again
Sent from my XT1058 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2446515
Delete. Returned to stock
Sent from my XT1058 using xda app-developers app
I am using a Mac so RSD lite isnt an option, when i boot into bootloader, fastboot commands dont work, any idea of how i can factory reset or go back to stock?
bstephens2u said:
I am using a Mac so RSD lite isnt an option, when i boot into bootloader, fastboot commands dont work, any idea of how i can factory reset or go back to stock?
Click to expand...
Click to collapse
Fastboot will work unless you're trying to downgrade. It will work with a locked bootloader because these are signed official images. All I can say is, make sure you have downloaded the correct file for your phone. If you're on Verizon, system flash won't work because the file size is too big. Just fastboot flash recovery recovery.img then reboot the phone and do a factory reset. This should take you back to stock.
Sent from my XT1058 using Tapatalk 4
thats what i was trying to do, the issue im having is when in fastboot and connected to the computer terminal no longer recognizes the device. even with ./adb devices or ./fastboot devices. I can't send any commands to the device using fastboot for some reason.
bstephens2u said:
thats what i was trying to do, the issue im having is when in fastboot and connected to the computer terminal no longer recognizes the device. even with ./adb devices or ./fastboot devices. I can't send any commands to the device using fastboot for some reason.
Click to expand...
Click to collapse
Sorry, but I'm not familiar with Mac enough to help. I'm sure someone can help you out though. I don't know if Mac and Linux are the same, but when I flash using fastboot on my Ubuntu machine, I have to do sudo fastboot flash or it won't work.
housry23 said:
Sorry, but I'm not familiar with Mac enough to help. I'm sure someone can help you out though. I don't know if Mac and Linux are the same, but when I flash using fastboot on my Ubuntu machine, I have to do sudo fastboot flash or it won't work.
Click to expand...
Click to collapse
rsd lite 6.1.4 is the only one that worked for me
Hey guys-
My questions is somewhat related to the OP, maybe not so much but I did not want to start a new thread.
Anyways...I got the Developer Version, how do I go about unlocking the bootloader, is there some moto site to do this like htcdev site?
Thanks in advance
EDIT: I am reading on some articles that it does already have an unlocked bootloader but I don't think that is the case on my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dodolom said:
Hey guys-
My questions is somewhat related to the OP, maybe not so much but I did not want to start a new thread.
Anyways...I got the Developer Version, how do I go about unlocking the bootloader, is there some moto site to do this like htcdev site?
Thanks in advance
Click to expand...
Click to collapse
Here you go, hope this helps
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1060 using Xparent Cyan Tapatalk 2
Bill Idol said:
Here you go, hope this helps
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1060 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
All good so far - Thanks

Any news on mj5 odin

As the title States, has anyone heard any news on the Odin file for MJ 5?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
ahjdmarchi said:
As the title States, has anyone heard any news on the Odin file for MJ 5?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
We are lucky enough to have some talented people working on it over the last few days.
http://forum.xda-developers.com/showthread.php?t=2502049&page=15
though they're not quite there yet.
bloodyRevolver said:
We are lucky enough to have some talented people working on it over the last few days.
http://forum.xda-developers.com/showthread.php?t=2502049&page=15
though they're not quite there yet.
Click to expand...
Click to collapse
thanks for that link mate.
Doesn't kies have some sort of emergency recovery? I never had to use it but without the mj5 files how does kies work?
Sent from my Nexus 7 using Tapatalk
tdamocles said:
Doesn't kies have some sort of emergency recovery? I never had to use it but without the mj5 files how does kies work?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
KIES EFR is NOT compatable with kies 3 or Kies2.xxx for updates or EFR.
So ... heres another knife in the back from samsung, not only can we not instal custom recovery
wecan't even use KIES to EFR back to stock.
I just tried.lol
Put her into DL mode...nothing
Rebooted, recognized device but KIES says "MJ5 not compatable to upgrade via kies"
Seriously Samsung wtf.
freakboy13 said:
KIES EFR is NOT compatable with kies 3 or Kies2.xxx for updates or EFR.
So ... heres another knife in the back from samsung, not only can we not instal custom recovery
wecan't even use KIES to EFR back to stock.
I just tried.lol
Put her into DL mode...nothing
Rebooted, recognized device but KIES says "MJ5 not compatable to upgrade via kies"
Seriously Samsung wtf.
Click to expand...
Click to collapse
Wow, so if all they do is OTAs from now on does that mean that EFR will never work?
Not even stores have the update to help out. Att or best buys with the samsung kiosk. Which is worrisome. I'm used to being able to just go back to stock to solve these issues. Now it just hope nothing happens to you phone that requires a firmware install.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Amazingly stupid....
Sent from my SAMSUNG-SM-N900A using Tapatalk
tdamocles said:
Amazingly stupid....
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Even Apple let's you do a complete restore on the iPhone.
Sent from my Nexus 7 using Tapatalk 4
Im sure that designgears can help us get one if people ask him.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
freakboy13 said:
KIES EFR is NOT compatable with kies 3 or Kies2.xxx for updates or EFR.
So ... heres another knife in the back from samsung, not only can we not instal custom recovery
wecan't even use KIES to EFR back to stock.
I just tried.lol
Put her into DL mode...nothing
Rebooted, recognized device but KIES says "MJ5 not compatable to upgrade via kies"
Seriously Samsung wtf.
Click to expand...
Click to collapse
I'm speaking with Samsung through facebook(ha) support and they're saying it is supported. Are they unaware or stupid?
Sent from my SAMSUNG-SM-N900A using Tapatalk
tdamocles said:
I'm speaking with Samsung through facebook(ha) support and they're saying it is supported. Are they unaware or stupid?
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
KIES 3 will work in the sense that you can use every thing BUT:
The EFR tool
&
The Update tool
Everything else with KIES 3
should be fine for your gn3.
And to reiterate, as I stated before... This thread is not about KIES itself, it's about the tool inside KIES: "EFR tool".
:beer:
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
freakboy13 said:
KIES EFR is NOT compatable with kies 3 or Kies2.xxx for updates or EFR.
So ... heres another knife in the back from samsung, not only can we not instal custom recovery
wecan't even use KIES to EFR back to stock.
I just tried.lol
Put her into DL mode...nothing
Rebooted, recognized device but KIES says "MJ5 not compatable to upgrade via kies"
Seriously Samsung wtf.
Click to expand...
Click to collapse
I think your barking up the wrong tree here. Kies restore is available for the note 3 for Tmobile, Verizon and Sprint. Leads me to believe At&t are the ones being a$$ holes.
freakboy13 said:
KIES 3 will work in the sense that you can use every thing BUT:
The EFR tool
&
The Update tool
Everything else with KIES 3
should be fine for your gn3.
And to reiterate, as I stated before... This thread is not about KIES itself, it's about the tool inside KIES: "EFR tool".
:beer:
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
They were telling me that EFR works just fine.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Yeah go ahead and believ what ATT or Samsung says.
fugdos guys.
It's the same scenario when the g2xpos **** phone hit the market:
LG "hi customer service can I help you? Oh what reboots? screen bleed? Overheating?Oh Im sorry sir
we ARE NOT AWARE of those issues, AND WOULD NEVER LIE TO YOU!!"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
www.lgphonesettlement.com
FU LG !! Got my 20$$
But seriously guys no clue whats up, but heres what I got when trying to run:
Update Firmware Tool & EFR(Emergency Firmware Recovery) tool
All I know is I was hoping to use EFR to get back to MI5, and no matter if I
tried to use the "Update Tool" or "EFR tool"
the image I posted is the message I got.
BTW the image is from like 10 min ago.
I keep getting device not responding while trying to connect to kies. Is there a service on the phone that kies needs to be running? I froze a bunch of stuff in TIBU and wonder if I froze something that it needs.
freakboy13 said:
Yeah go ahead and believ what ATT or Samsung says.
fugdos guys.
It's the same scenario when the g2xpos **** phone hit the market:
LG "hi customer service can I help you? Oh what reboots? screen bleed? Overheating?Oh Im sorry sir
we ARE NOT AWARE of those issues, AND WOULD NEVER LIE TO YOU!!"
www.lgphonesettlement.com
FU LG !! Got my 20$$
But seriously guys no clue whats up, but heres what I got when trying to run:
Update Firmware Tool & EFR(Emergency Firmware Recovery) tool
All I know is I was hoping to use EFR to get back to MI5, and no matter if I
tried to use the "Update Tool" or "EFR tool"
the image I posted is the message I got.
BTW the image is from like 10 min ago.
Click to expand...
Click to collapse
unsettling and upsetting.
Hey Freak- Keep us posted on your progress. I can't believe Samsung or AT&T would disable the Emergency Recovery in Kies. It seems to me it would lessen the amount of warranty returns. This phone is looking less desirable with each roadblock we encounter.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
I found the service that was causing my issue. You need to have wssyncmlnps enabled for Kies to make the connection. I had froze it because it was using a lot of battery.
Sent from my SAMSUNG-SM-N900A using Tapatalk
kc2kzz said:
I found the service that was causing my issue. You need to have wssyncmlnps enabled for Kies to make the connection. I had froze it because it was using a lot of battery.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
but this shouldnt make a difference using Kies. if the phone is soft bricked you would not be able to access this anyway. I went to best buy and the samsung kiosk. they called up samsung and the rep told him that the firmware was not supported/released for kies or any download interface. att could not do it, best buy could not do it. they had to just replace the phone.
Which i do think is stupid. Why have so many replacements when you can just release the firmware and same your reps time and money on the replacements.

My phone stopped working suddenly on Android n

My phone wad running Android n since it's out.i got the ota ,and everything was perfect.yesterday ,aftet sending a message through WhatsApp, the phone shuted down, and won't boot anymore.no matter what i try the phone wont boot. All help will be appreciated. Im attaching a photo of the screen i see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 5 using Tapatalk
there is a fix . google had an image to sideload that is supposed to unbrick your phone . google it
https://www.reddit.com/r/nexus6/comments/49txh3/bricked_nexus_6_after_android_n_ota_update_stock/
My recovery doesn't give me any option,like adb side load.i cant even enter recovery, that's my problem.
Sent from my Nexus 5 using Tapatalk
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
do you have the latest android sdk installed?
I downloaded it,but unfortunately I never used it before, so I'm kinda lost.ill try to read some manuals and hope that it'll work.
Sent from my Nexus 5 using Tapatalk
kidhudi said:
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
do you have the latest android sdk installed?
Click to expand...
Click to collapse
Also the problem is ,that the option oem unlock in developer settings is off.
Sent from my Nexus 5 using Tapatalk
orihuri said:
Also the problem is ,that the option oem unlock in developer settings is off.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
maybe google or moto can help you.
sorry to hear that bro. you should always always unlock and root and enable adb in developer options on your phone so these problems become far less of importance.
does jtag work on these phones? i knew mt s3 could be saved that way. maybe send it to someone i saw on ebay that it was pretty cheap like 60 bucks
good luck sorry i couldnt help
kidhudi said:
maybe google or moto can help you.
sorry to hear that bro. you should always always unlock and root and enable adb in developer options on your phone so these problems become far less of importance.
good luck sorry i couldnt help
Click to expand...
Click to collapse
Tnx bro.Im rooting and moding Android since froyo.never thought that ill brick from an ota ,and fully stocked
Sent from my Nexus 5 using Tapatalk
orihuri said:
Also the problem is ,that the option oem unlock in developer settings is off.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Here is manual and OTA:
http://developer.android.com/preview/download-ota.html
AFAIK bootloader setting in dev options doesn't have to be enabled
did you try the nexus root toolkit to flash a factory image?
---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------
Droidphilev said:
Here is manual and OTA:
http://developer.android.com/preview/download-ota.html
AFAIK bootloader setting in dev options doesn't have to be enabled
Click to expand...
Click to collapse
that is what i was trying to say
kidhudi said:
did you try the nexus root toolkit to flash a factory image?
---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------
that is what i was trying to say
Click to expand...
Click to collapse
No luck.
Sent from my Nexus 5 using Tapatalk
orihuri said:
My phone wad running Android n since it's out.i got the ota ,and everything was perfect.yesterday ,aftet sending a message through WhatsApp, the phone shuted down, and won't boot anymore.no matter what i try the phone wont boot. All help will be appreciated. Im attaching a photo of the screen i see
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Try Using WUG's Nexus Toolkit to flash back to stock unrooted.
g33k3r said:
Try Using WUG's Nexus Toolkit to flash back to stock unrooted.
Click to expand...
Click to collapse
Im on stock rom,locked bootloader, with the oem unlock option not ticked in the developer settings.the toolkit is not working for me.
Sent from my Nexus 5 using Tapatalk
orihuri said:
Im on stock rom,locked bootloader, with the oem unlock option not ticked in the developer settings.the toolkit is not working for me.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
How is the tool not working? What exactly are you getting when trying to flash image? Do you want to do a remote session? I can help you out.
g33k3r said:
How is the tool not working? What exactly are you getting when trying to flash image? Do you want to do a remote session? I can help you out.
Click to expand...
Click to collapse
I cant enter recovery, and adb can't read the device
Sent from my Nexus 5 using Tapatalk
g33k3r said:
How is the tool not working? What exactly are you getting when trying to flash image? Do you want to do a remote session? I can help you out.
Click to expand...
Click to collapse
I cant enter recovery, and adb can't read the device
g33k3r said:
How is the tool not working? What exactly are you getting when trying to flash image? Do you want to do a remote session? I can help you out.
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk
orihuri said:
Im on stock rom,locked bootloader, with the oem unlock option not ticked in the developer settings.the toolkit is not working for me.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
orihuri said:
I cant enter recovery, and adb can't read the device
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Is fastboot recognized?
g33k3r said:
Is fastboot recognized?
Click to expand...
Click to collapse
Yes,but the commands turn off the screen,and not executing the commands
Sent from my Nexus 5 using Tapatalk
orihuri said:
Yes,but the commands turn off the screen,and not executing the commands
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Do you want to try a remote session to see if I can help you out?
g33k3r said:
Do you want to try a remote session to see if I can help you out?
Click to expand...
Click to collapse
I never did a remote session before. How can we do it?
Sent from my Nexus 5 using Tapatalk

Categories

Resources