I am attempting to get Cyanogenmod onto my Nexus One, but am running into far more problems than expected. The information on rooting Android devices seems heavily fragmented across the web and the tools unreliable. At least in my case, SuperOneClick has proven a complete misnomer. So I'd like to go back to basics - executing as many of the commands as possible from a Linux terminal to get the phone rooted/unlocked/whatever else has to happen to get Cyanogenmod installed. The two constraints I'm working with here are as follows:
1. The device is running Android 2.2.1 (I downgraded from 2.3.x using the PASSIMG method).
2. The power button on the device is broken, so any method which requires pressing/holding it is ruled out.
The problem I am having is that even after following Linux-centric guides, I get to the point of installing the SuperUser app followed by the ROM Manager app, but I'm never prompted to give ROM Manager superuser permissions and so can't flash the ClockworkMod recovery.
Below I describe the steps I've been taking so far, based on the "How To Root Nexus One Running Android 2.2.1 From Ubuntu Linux" guide (Google it, I can't post hyperlinks).
- Download/extract/move Nexus One Softroot files to same directory as adb
- From adb directory, execute the following commands:
sudo ./adb push psneuter /data/local/tmp/psneuter
sudo ./adb push busybox /data/local/tmp/busybox
sudo ./adb push su /data/local/tmp/su
sudo ./adb shell chmod 755 /data/local/tmp/psneuter
sudo ./adb shell chmod 755 /data/local/tmp/busybox
sudo ./adb shell chmod 755 /data/local/tmp/su
sudo ./adb shell cd /data/local/tmp ./psneuter
sudo ./adb shell
After executing sudo ./adb shell as above, I get the # prompt, which is purported to indicate that rooting was successful.
- Still following the guide, I then execute the commands which purportedly make root permanent:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /data/local/tmp
./busybox cp busybox /system/bin
chmod 4755 /system/bin/busybox
busybox cp su /system/bin
chmod 4755 /system/bin/su
exit
exit
- Again, still following the guide, I execute the commands which purportedly set the /system partition back to read-only:
sudo ./adb shell
su
mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
- Now, I download the SuperUser app from the Android Market and open it to make sure it's running.
- Next, I download the ROM Manager app from Google Play (looks like it pulled a sneaky and upgraded from Android Market to Google Play here).
- I run ROM Manager and choose Flash ClockworkMod Recovery. I'm prompted to confirm the phone is a Google Nexus One and then ROM Manager runs for about 30 seconds (yellow program bar goes all the way) before spitting out An error occurred while attempting to run privileged commands!. And this is the point I am stuck at.
I should note that at no point am I prompted by the SuperUser app to give the ROM Manager app super user permissions. I don't restart the phone or do anything else throughout all of the steps I've described above, so I can't see any reason for root to have been lost at any point. In fact, if I execute the command sudo ./adb shell after all this, I still get the # prompt indicating root. And when I execute id afterwards, I get uid=0(root) gid=0(root) -- further confirmation of root. I really am stuck on this one. I've spent a lot of time digging through forum posts and online articles, but the signal to noise ratio is poor and I haven't been able to find anything that actually works. Can someone suggest where I am going wrong?
Programs might expect su to be in /system/xbin rather than /system/bin, which is probably your case.
Also, use SuperSU instead of Superuser.
Also, make sure the su you're using is matching the relevant control program - which means, downloading Superuser from the Play Store won't help, if it can't work with the binary you have. So download a complete ZIP from XDA with SuperSU.apk and su binary, and use those. The last version I used was 0.89 and it was on XDA just like I described above.
interesting problem with ez fix, get new phone. n1's are $100 on ebay, thats how i got mine.
Related
Ladies and Gents:
Please help me out.
I am trying to install a "Japanese IME" that sir JMaurice has kindly provided through one of the forums.
Did everything (I think) required in order to get my N1 connected and recognized by my laptop. Then used SuperOneClickv1.5.5-ShortFuse to gain root. Started on the IME installation and got the following.
>adb devices
List of devices attached
HTxxxPxxxxxx device
>adb kill-server
* server not running *
>adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adbd cannot run as root in production builds
>adb remount
remount failed: Operation not permitted
So I decided to confirm root.
>adb shell
$ su
su
# exit
exit
$ exit
exit
I couldn't start the "adb push" sequence due to the errors above. What am I doing wrong?
Did you reboot after executing SuperOneClick? Try that.
Jack_R1 said:
Did you reboot after executing SuperOneClick? Try that.
Click to expand...
Click to collapse
Believe I rebooted. Rebooted again just in case. Still gives me the following:
>adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adbd cannot run as root in production builds
>adb remount
remount failed: Operation not permitted
Weird, but already seen on the forum not a long time ago, I think. I'm not sure what can be done in this situation. "adb remount" can be easily substituted by shell commands, root shell you're still achieving by "su", but how to solve this - I have no idea. Might be permissions thing.
Jack_R1 said:
Weird, but already seen on the forum not a long time ago, I think. I'm not sure what can be done in this situation. "adb remount" can be easily substituted by shell commands, root shell you're still achieving by "su", but how to solve this - I have no idea. Might be permissions thing.
Click to expand...
Click to collapse
Thanks for your replies. Am searching the forums for a similar post; still no luck. Hopefully someone will chime in with an answer.
Thanks again.
You have root, you just don't have an insecure boot.img
Rusty! said:
You have root, you just don't have an insecure boot.img
Click to expand...
Click to collapse
Please clarify. Where possible, detailed explanation/instructions would be most appreciated.
You have root, that's all fine.
To use the command adb remount, you need an insecure bootloader, as you don't have this (due to using the stock boot.img) you have to mount /system as RW in a different way:
su
mount -o remount,rw /dev/mtdblock3 /system
Rusty! said:
You have root, that's all fine.
To use the command adb remount, you need an insecure bootloader, as you don't have this (due to using the stock boot.img) you have to mount /system as RW in a different way:
su
mount -o remount,rw /dev/mtdblock3 /system
Click to expand...
Click to collapse
What I am trying to achieve after adb remount is:
adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
adb push iWnnIME/libnjubase2.so /system/lib/
adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
adb install iWnnIME/iWnnIME.apk
This will actaully be the first time for me to use su. Could you confirm whether the following sequence of commands are correct?
>adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /data
# exit
$ exit
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
>adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk
Please let me know if I am missing anything.
Wrong. You don't need to remount data, it's always writeable, and the command is erroneous - you're mounting system partition and calling it "data". You need to just push the apps to /data, as shown below:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
> adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk
Jack_R1 said:
Wrong. You don't need to remount data, it's always writeable, and the command is erroneous - you're mounting system partition and calling it "data". You need to just push the apps to /data, as shown below:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
> adb push iWnnIME/[email protected]@[email protected] /data/dalvik-cache/
> adb shell
$ su
# mount -o remount,rw /dev/mtdblock3 /system
# exit
$ exit
> adb push iWnnIME/libiwnn.so /system/lib/
.
.
.
> adb push iWnnIME/libnjubase2.so /system/lib/
> adb push iWnnIME/DroidSansJapanese.ttf /system/fonts/
> adb install iWnnIME/iWnnIME.apk
Click to expand...
Click to collapse
I think I am starting to understand this. I punched in the first adb push sequence and got the following:
> adb push iWnnIME/jp.co.omronsoft.iwnnime /data/data/
push: iWnnIME/jp.co.omronsoft.iwnnime/dicset/master/njuserphone.a -> /data/data/dicset/master/njuserphone.a
failed to copy 'iWnnIME/jp.co.omronsoft.iwnnime/dicset/master/njuserphone.a' to '/data/data/dicset/master/njuserphone.a': No such file or directory
Checked in tools directory and the appropriate directory/file combination was there. Does this indicate that I have to create the appropriate directory in my phone?
Someone? Anyone?
Or is it possible to execute the same adb sequence in shell as su?
I must admit, I've never pushed more that a single file at a time over, given you appear to be trying to push an entire directory tree, perhaps you might be better off copying it over to the SD card in Windows, and using busybox to get it where you need it.
Exactly as Rusty suggested above me. Otherwise you need to create all the directories manually, through adb shell mkdir <your_directory_that_is_not_on_the_phone> .
This guide is for people who want root but want to keep their stock rom, not breaking the warranty, unlocking bootloader etc.
A proud ubuntu user, I am writing this in a new thread purely because the manual rageagainstthecage method and SuperOneClick method did not not work for me, see link to my conclusion below if you care
http://forum.xda-developers.com/showpost.php?p=11305312&postcount=2526
What did work however was via adb shell using psneuter and its fairly simple if you follow the following commands.
This guide assumes you know how to get access to the shell via adb, if you dont then search elsewhere for a useful guide
OK lets get to business!
1. Download the attached nexus_one_softroot.tar from the bottom of this post and extract contents to the same folder as adb
2. Open up your terminal, cd to the same folder as adb and the extracted files
3. Enter the following commands:
Code:
sudo ./adb push psneuter /data/local/tmp/psneuter
sudo ./adb push busybox /data/local/tmp/busybox
sudo ./adb push su /data/local/tmp/su
sudo ./adb shell chmod 755 /data/local/tmp/psneuter
sudo ./adb shell chmod 755 /data/local/tmp/busybox
sudo ./adb shell chmod 755 /data/local/tmp/su
sudo ./adb shell
After this you should see only a $ which tells us that we at the android command line with user privileges only, lets continue
Code:
$ cd /data/local/tmp
$ ls
busybox
su
psneuter
$ ./psneuter
property service neutered.
killing adbd. (should restart in a second or two)
You will now be kicked out of android shell, lets go back in
Code:
sudo ./adb shell
After this you should see only a # which tells us that we root baby! If you want to double check issue this command
Code:
# id
uid=0(root) gid=0(root)
Lets continue on. From this point we will install busybox and su which will make root permanent
Code:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd /data/local/tmp
# ./busybox cp busybox /system/bin
# chmod 4755 /system/bin/busybox
# busybox cp su /system/bin
# chmod 4755 /system/bin/su
# exit
For some reason I sometimes have to enter exit twice to leave the android shell. Again, re-access the android shell
Code:
sudo ./adb shell
Now in the android shell we can finish up
Code:
# su
# mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
# exit
# exit
Lastly we must install Superuser, and I did this from the android market so I knew its the latest version, its simple to get, less command input etc.
Now you have root! I hope this was simple enough to follow, I have not really written a guide before but from lots of searching I just could not find a solution for my Nexus One 2.2.1 FRG83D, especially any guide that uses psneuter.
Anyway, glad to contribute
EDIT - also, being new to starting threads, this may not quite be in the right section of the forum, sorry if thats the case mods
Added link to the thread from Wiki.
upgraded to gingerbread 2.3.3. after copying and setting permissions, got this:
PHP:
$ cd /data/local/tmp
$ ls -l
-rwxr-xr-x shell shell 26248 2010-07-22 10:20 su
-rwxr-xr-x shell shell 1062992 2010-10-16 22:29 busybox
-rwxr-xr-x shell shell 585731 2011-01-08 18:02 psneuter
su
busybox
psneuter
$ ./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
second time threw me out of shell. again adb shell gives this:
PHP:
$ id
uid=2000(shell) gid=2000(shell) groups=1003(graphics),1004(input),1007(log),1009(mount),1011(adb),1015(sdcard_rw),3001(net_bt_admin),3002(net_bt),3003(inet)
mfkr said:
upgraded to gingerbread 2.3.3. after copying and setting permissions, got this:
Code:
$ ./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
Click to expand...
Click to collapse
I believe this is due to a change in the kernel as it is upgraded into gingerbread, the input/output controls have changed, leaving psneuter out of date with the current kernel.
However if an exploit is found with the kernel used in 2.3.3, you can use it in place of psneuter with the above method.
Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks
You rock!
I was at this for a while before I found your post. I'm on windows, but this is the only thread I could find that had anything useful Mind if I share this around on other forums?
Just link them back, steps are almost identical for Windows. Just need to remove the ./ from the adb commands
Sent from my HTC One using Tapatalk 4 Beta
WinDroidGuy said:
Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/bin/su
cat /sdcard/su > /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks
Click to expand...
Click to collapse
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
rayman said:
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
Click to expand...
Click to collapse
Thanks, this was my first time doing anything like this...figured I'd try to hack together something from other guides, since I didn't see very many people with the device yet. I will change it now
WinDroidGuy said:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Click to expand...
Click to collapse
This is really pointless, userdata is already RW, cache should be RW, but more importantly you do nothing that would require them to be remounted
I'm not sure what I am doing wrong here. Can anyone help? All the files are there.
TadeoNYC said:
I'm not sure what I am doing wrong here. Can anyone help? All the files are there.
Click to expand...
Click to collapse
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update
Thank you Elmero.
I'm so glad I gave up and went to bed last night. It could not have gone smoother. I followed the instructions for setting up wireless adb from here http://forum.xda-developers.com/showthread.php?t=2272266 as well.
TIP: I wasted an hour or more trying to figure out why PC was not recognizing the OUYA at all. It was the stupid Micro usb port, compunding the fact that all the ports are to close to begin with the micro usb port is very deep. Neither of my Samsung cables worked, fortunately I have a kodak pocket video cam and the cable for that is a few mm longer and worked perfectly.
And who said Kodac isn't relevant anymore?
Sent from my Nexus 7 using xda premium
The link to the Superuser.apk is not working.
pdelponte said:
The link to the Superuser.apk is not working.
Click to expand...
Click to collapse
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta
WinDroidGuy said:
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Not working for me either.
This webpage is not available
The webpage at http://fs1.d-h.st/download/00044/BBk/superuser.zip might be temporarily down or it may have moved permanently to a new web address.
Click to expand...
Click to collapse
There is an issue with the website. Just try back until it connects.
Sent from my GT-P3113 using Tapatalk 2
just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?
tanush said:
just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?
Click to expand...
Click to collapse
1) It's already rooted.
2) You can already sideload anything you want to it, same as (almost) any android device, whether it is rooted or not. (http://forum.xda-developers.com/showpost.php?p=41796467&postcount=11)
elmerohueso said:
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update
Click to expand...
Click to collapse
So what steps need to be repeated after the OTA?
from my limited understanding I think it should be steps 4 through 12. Or does the system partition not need to be mounted as read-write again?
Sent from my GT-P3113 using Tapatalk 4 Beta
Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
professorpoptart said:
Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Might be a good idea to do them. The OTA version of such is different from the one in this guide. I had tried keeping the stock su and superuser complained
Sent from my Nexus 7 using xda premium
Do you still have access to the ouya store after SU installed? I heard rumors that access to the store was blocked until root access removed?
Sent from my GT-N7100 using Tapatalk 2
Has anybody worked out how to create a Genymotion Xposed testing device?
What I've already achieved:
- Grant Root access to Xposed
- Flash ARM zip
The problem is: Genymotion runs on x86, not ARM. So flashing the ARM zip just breaks the VM.
But flashing the x86 zip just gives the Error "Failed to flash file".
(Yes, I'm using Genyflash)
I also tried it with and without arm translation, no changes.
I simply have no idea what else I could try. Is it currently possible at all?
LM13 said:
Has anybody worked out how to create a Genymotion Xposed testing device?
What I've already achieved:
- Grant Root access to Xposed
- Flash ARM zip
The problem is: Genymotion runs on x86, not ARM. So flashing the ARM zip just breaks the VM.
But flashing the x86 zip just gives the Error "Failed to flash file".
(Yes, I'm using Genyflash)
I also tried it with and without arm translation, no changes.
I simply have no idea what else I could try. Is it currently possible at all?
Click to expand...
Click to collapse
I found that the flash-script.sh inside the xposed-v78-sdk23-x86.zip file is somehow not successfully executed by Genymotion. I've manually patched it.
getting root on Marshmallow
Hi,
How did You get root on Marshmallow?
Sergiusz
sbrzezin said:
Hi,
How did You get root on Marshmallow?
Sergiusz
Click to expand...
Click to collapse
Yes, the latest Genymotion version already come with rooted MM image
itandy said:
Yes, the latest Genymotion version already come with rooted MM image
Click to expand...
Click to collapse
I installed Custom Phone and Google Nexus 7 and none of them has root. Should I do any special setup or did I install wrong device? I use Genymotion 2.6.0 free version.
Sergiusz
sbrzezin said:
I installed Custom Phone and Google Nexus 7 and none of them has root. Should I do any special setup or did I install wrong device? I use Genymotion 2.6.0 free version.
Sergiusz
Click to expand...
Click to collapse
The ROM should be rooted already. su command is available and when you use ADB, it's already a rooted shell.
itandy said:
The ROM should be rooted already. su command is available and when you use ADB, it's already a rooted shell.
Click to expand...
Click to collapse
I got answer from Genymotion team:
"I just got an update from the Dev Team : it appears that in 6.0 the SuperUser Android App hasn't been yet implemented.
This feature will be implemented in the future, and I have linked your request to the task.
When it will be completed and released, you will be automatically notified."
Sergiusz
sbrzezin said:
I got answer from Genymotion team:
"I just got an update from the Dev Team : it appears that in 6.0 the SuperUser Android App hasn't been yet implemented.
This feature will be implemented in the future, and I have linked your request to the task.
When it will be completed and released, you will be automatically notified."
Sergiusz
Click to expand...
Click to collapse
So I managed to make some progress on this. I got the latest v84 xposed working in the newest Genymotion 2.6.0 with a Nexus 5X image by doing the following:
Code:
git clone https://github.com/rovo89/GenyFlash
cd GenyFlash && ./install.sh
adb push xposed-v84-sdk23-x86.zip /sdcard
adb shell flash-archive.sh /sdcard/xposed-v84-sdk23-x86.zip
Reboot Genymotion VM and then drag XposedInstaller_3.0_alpha4.apk to Genymotion vm...profit!
As stated above, the Genymotion images are rooted but a lot of root apps ask for permission and the prompt to grant/deny root wasn't working for me rendering the apps limited in use. I downloaded the newest SuperSU BETA, at the time of this post, BETA-SuperSU-v2.71-20160331103524. I extracted it and then issues the following commands from terminal:
Code:
adb shell mount -o remount,rw /system
adb install common/Superuser.apk
adb push x86/su /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
The problem was issuing the "su" commands resulted in: "error: only position independent executables (PIE) are supported." Countless time spent google searching didn't turn up any leads, but then I happened to notice in the x86/su directory a file called su.pie...pie = position independent executable derp. So I reran the following:
Code:
adb shell mount -o remount,rw /system
adb push x86/su.pie /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su.pie /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
Rebooted my Genymotion vm and BAM root access prompts!!!!! Hope this helps others and good luck.
Worked for me
123SIT said:
So I managed to make some progress on this. I got the latest v84 xposed working in the newest Genymotion 2.6.0 with a Nexus 5X image by doing the following:
Code:
git clone https://github.com/rovo89/GenyFlash
cd GenyFlash && ./install.sh
adb push xposed-v84-sdk23-x86.zip /sdcard
adb shell flash-archive.sh /sdcard/xposed-v84-sdk23-x86.zip
Reboot Genymotion VM and then drag XposedInstaller_3.0_alpha4.apk to Genymotion vm...profit!
As stated above, the Genymotion images are rooted but a lot of root apps ask for permission and the prompt to grant/deny root wasn't working for me rendering the apps limited in use. I downloaded the newest SuperSU BETA, at the time of this post, BETA-SuperSU-v2.71-20160331103524. I extracted it and then issues the following commands from terminal:
Code:
adb shell mount -o remount,rw /system
adb install common/Superuser.apk
adb push x86/su /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
The problem was issuing the "su" commands resulted in: "error: only position independent executables (PIE) are supported." Countless time spent google searching didn't turn up any leads, but then I happened to notice in the x86/su directory a file called su.pie...pie = position independent executable derp. So I reran the following:
Code:
adb shell mount -o remount,rw /system
adb push x86/su.pie /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su.pie /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
Rebooted my Genymotion vm and BAM root access prompts!!!!! Hope this helps others and good luck.
Click to expand...
Click to collapse
Worked for me on the Google Nexus 9 API 23
gamerkcw123 said:
Worked for me on the Google Nexus 9 API 23
Click to expand...
Click to collapse
Hell yeah! I was beginning to think I was the only one who wanted this...and then there were two lol
123SIT said:
Hell yeah! I was beginning to think I was the only one who wanted this...and then there were two lol
Click to expand...
Click to collapse
the Supersu.apk still won't update the su binary. Do you know of a way to get that to work? If not I don't care I have supersu granting root. LOL
gamerkcw123 said:
the Supersu.apk still won't update the su binary. Do you know of a way to get that to work? If not I don't care I have supersu granting root. LOL
Click to expand...
Click to collapse
If I remember correctly I have that same issue but if you use the newest supersu zip you should be able to update it manually via the provided steps.
I think GenyFlash shouldn't be needed anymore... just drag and drop the x86 zip and the installer APK on the Genymotion window and reboot. The only thing that isn't working are the reboot buttons in the installer.
123SIT said:
If I remember correctly I have that same issue but if you use the newest supersu zip you should be able to update it manually via the provided steps.
Click to expand...
Click to collapse
I got it to work. This is what I did. I fallowed your steps to get SuperSU working, and granting
apps permission. Then I removed the APK and installed the APK from the 2.46 update. Then I updated SuperSU.apk from the play store. Success the binary updated successfully.
Step 1: fallowed your steps with the Bata.
Step 2: once I confirmed superSU is working, I remove the APK.
Step 3: I use the SuperSU APK in the 2.46 update.
Step 4: I use adb to push the APK in the 2.46 update to /system/app, and chmod it to 755.
Step 5: I reboot and go to the play store and update SuperSU.
Success!!!!!!!
this was again on the Genymotion Google Nexus 9 6.0 API.
rovo89 said:
I think GenyFlash shouldn't be needed anymore... just drag and drop the x86 zip and the installer APK on the Genymotion window and reboot. The only thing that isn't working are the reboot buttons in the installer.
Click to expand...
Click to collapse
You know, I don't think I ever actually tried it without. May have saved me some time lol
123SIT said:
So I managed to make some progress on this. I got the latest v84 xposed working in the newest Genymotion 2.6.0 with a Nexus 5X image by doing the following:
Code:
git clone https://github.com/rovo89/GenyFlash
cd GenyFlash && ./install.sh
adb push xposed-v84-sdk23-x86.zip /sdcard
adb shell flash-archive.sh /sdcard/xposed-v84-sdk23-x86.zip
Reboot Genymotion VM and then drag XposedInstaller_3.0_alpha4.apk to Genymotion vm...profit!
As stated above, the Genymotion images are rooted but a lot of root apps ask for permission and the prompt to grant/deny root wasn't working for me rendering the apps limited in use. I downloaded the newest SuperSU BETA, at the time of this post, BETA-SuperSU-v2.71-20160331103524. I extracted it and then issues the following commands from terminal:
Code:
adb shell mount -o remount,rw /system
adb install common/Superuser.apk
adb push x86/su /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
The problem was issuing the "su" commands resulted in: "error: only position independent executables (PIE) are supported." Countless time spent google searching didn't turn up any leads, but then I happened to notice in the x86/su directory a file called su.pie...pie = position independent executable derp. So I reran the following:
Code:
adb shell mount -o remount,rw /system
adb push x86/su.pie /system/bin/su
adb shell chmod 0755 /system/bin/su
adb push x86/su.pie /system/xbin/su
adb shell chmod 0755 /system/xbin/su
adb shell su --install
adb shell "su --daemon&"
adb shell setenforce 0
adb shell mount -o remount,ro /system
Rebooted my Genymotion vm and BAM root access prompts!!!!! Hope this helps others and good luck.
Click to expand...
Click to collapse
It's worked on Galaxy S6 6.0.0 API23, Genymotion 2.7.2! Thanks you so much!
Is it still possible to root my original droid (running 2.2.3)? Baseband version C_.1.43.1P , kernel 2.6.32.9
I checked many threads but most of the download links of apk or other app are dead.
I really need to root this phone, if somebody has instructions and files, I would really appreciate it.
So I found this working root method from some other forum, sharing in case anyone needs it, I doubt it though
Go to settings on your phone
then applications
then development
check the box for usb debugging[/Hide]
2.) Extract rageagainstthecage.zip to c:\droidroot
3.) Connect your phone to the computer via usb cable
4.) on the computer open the command prompt. (In the start menu under accessories)
5.) cd to your adb tools directory. For most the command would look like this cd C:\android-sdk-windows\tools
6.) adb devices (This should list a device as a long number under list of devices. If it doesnt something is wrong.)
7.) adb push c:\droidroot\rageagainstthecage-arm5.bin /data/local/tmp
8.) adb shell
9.) cd /data/local/tmp
10.) chmod 0755 rageagainstthecage-arm5.bin
11.) ./rageagainstthecage-arm5.bin (This can take a minutes just let it go until you are returned to your adb tools folder)
12.) adb devices
13.) adb shell (you should now see a # instead of a $)
14.) mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system
15.) exit
16.) adb push c:\droidroot\Superuser.apk /system/app
17.) adb push c:\droidroot\su /system/bin
18.) adb push c:\droidroot\busybox /system/bin
19.) adb shell
20.) chmod 4755 /system/bin/su
21.) chmod 4755 /system/bin/busybox
22.) mv /system/recovery-from-boot.p /system/recovery-from-boot.p.disabled Note if you are on a build earlier than froyo this step will fail. That is fine and expected.
23.) mount -o ro,remount -t yaffs2 /dev/block/mtdblock4 /system
24.) rm /data/local/tmp/rageagainstthecage-arm5.bin
25.) exit