Database Develop

[Request] Stock(5.5.959) virgin system.img needed

We are trying to solve how to make our own fastboot system.img files from dd the system partition on a phone. If we can get a stock, 5.5.959, system.img that has never been mounted read/write, then we should be able to compare it to a fastboot system.img and figure out the exact difference. We already have a start of an idea, but it has to be perfect.
By virgin, no OTA patches, and no mounting read/write. You do have to root the phone, but on the temporary root. Put busybox in /data/tmp or somewhere. Next chmod 755 /data/tmp/busybox . Then do something like /data/tmp/busybox dd if=/dev/block/system of=/data/tmp/system.img . Finally copy /data/tmp/system.img off the phone and post it in this thread, please.
Busybox

We already have this file.
You have had it for days, in fact. You converted it to system.tar.gz for me.
Source: erismaster
Satisfies all of your requirements -- 5.5.959 (not OTA!), Verizon, temp ADB root, never mounting /system, dd with those arguments.

psouza4 said:
We already have this file.
You have had it for days, in fact. You converted it to system.tar.gz for me.
Source: erismaster
Satisfies all of your requirements -- 5.5.959 (not OTA!), Verizon, temp ADB root, never mounting /system, dd with those arguments.
Click to expand...
Click to collapse
Is there anyways to get my hands on this? My phone is purely in fastboot mode only and have no other real options to me, so if i could somehow flash this via fastboot, it may actually solve my issue.
(I cant even get into recovery)

edru said:
Is there anyways to get my hands on this? My phone is purely in fastboot mode only and have no other real options to me, so if i could somehow flash this via fastboot, it may actually solve my issue.
(I cant even get into recovery)
Click to expand...
Click to collapse
http://www.megaupload.com/?d=N2FPWHE6

I tried a fastboot flash of this system.img and it gave me a crc check failure.

You can't flash it, it's not signed. It's only useful for development.
Sent from my DROID3 using XDA App

Thanks very much!

No worries about finding a system.img that hasn't ever been mounted . . . we now have "Like a Virgin" images for repeated re-mounting and her pleasure.

Location please?

Wolfhere said:
Location please?
Click to expand...
Click to collapse
the thread is on the main page . . . . http://www.necrotania.com/Download/swu.zip

[ROOT][CWM] Root Nexus 4 & Install Official ClockworkMod Recovery

I originally posted this method at AddictiveTips. The method I posted there is targeted at everyone including the absolute beginners and I have also included instructions there for setting up the required tools, and for reverting back to the original recovery and boot image in case anything goes wrong. All external credits should be given to that guide (it does link back to this thread). Here is the link: How To Root Nexus 4 and Install ClockworkMod Recovery on it.
To my knowledge, this is the first confirmed working rooting method for Nexus 4 posted here at XDA. Though my knowledge is limited, so please correct me if I am wrong.
UPDATE: There is an official ClockworkMod recovery for Nexus 4 now available directly by Koush, so this should all be easy as pie now and you can now safely install CWM too. I am updating the CWM method with the updated instructions.
This method requires an unlocked bootloader. You can find instructions for unlocking it at XDA, or at the AddictiveTips guide linked above (the link to the bootloader unlock guide is in the requirements section there).
UPDATE 2: If your device does NOT get wiped after unlocking the bootloader, fret not. While this isn't expected behavior, several users have experienced the same on the Nexus 4. This could be due to some error at Google's end, but unlocking still works perfectly fine.
That said, let's get on with rooting and flashing CWM.
ClockworkMod Recovery Method:
Download the latest official ClockworkMod recovery from CWM website and rename it to recovery.img
Enable Android Debugging from Settings > Developer Options. (If you can't find developer options, go to 'About' and tap 'Build number' seven times.)
Connect the device to your computer via USB, and install the required drivers.
Download the recovery flashable SuperSU package with Busybox and transfer it to your phone's internal SD card.
Reboot into fastboot/bootloader:
Code:
adb reboot bootloader
You can also power off the phone and then use power + volume-down key combination to get into bootloader.
Unlock the bootloader if you haven't done so already. WARNING: This command will wipe all data on your device.
Code:
fastboot oem unlock
Enter this command in a command prompt to flash the ClockworkMod recovery (making sure you are in the directory where you downloaded the recovery file):
Code:
fastboot flash recovery recovery.img
OR
If you simply want to root without flashing a custom recovery and want to stick to your stock recovery, simply boot this recovery once using this command:
Code:
fastboot boot recovery.img
If you flashed the recovery in the previous step, you can now boot into recovery by pressing volume-up or volume-down twice to select the recovery option, and then the power button to enter it. If you simply booted into the recovery file without flashing it in the previous step, you should already be in recovery now.
Once in recovery, take a backup to be on the safe side.
Flash the downloaded SuperSU and busybox package zip file from recovery.
Clear cache and dalvik cache just in case (not required but won't hurt).
Reboot the device.
ADB and Insecure Boot Image Method:
Grab the insecure boot image from this thread.
Also download these root files. This package includes the latest SuperSU 0.98, latest su binary that comes with it, and working busybox (not sure if latest).
Extract the contents of the downloaded zip file to your computer.
Enable Android Debugging from Settings > Developer Options. (If you can't find developer options, go to 'About' and tap 'Build number' seven times.)
Connect the device to your computer via USB, and install the required drivers.
Reboot into fastboot/bootloader:
Code:
adb reboot bootloader
You can also power off the phone and then use power + volume-down key combination to get into bootloader.
Unlock the bootloader if you haven't done so already. WARNING: This command will wipe all data on your device.
Code:
fastboot oem unlock
Get back into bootloader mode and boot into the downloaded insecure boot image:
Code:
fastboot boot boot.img
Don't worry, this will not replace your existing boot image and will only boot from the insecure one once.
If it does NOT work for you and you get stuck in a boot loop, simply reboot your phone into bootloader and use the above command again. Some users had issues with booting from it the first time, but a second attempt worked.
Once booted into Android successfully using the insecure boot image, simply enter these commands one by one in command prompt (making sure you are in the directory where you downloaded the files):
Code:
adb shell mount -o remount,rw /system
adb push su /system/bin/
adb push Superuser.apk /system/app/
adb push busybox /system/xbin/
adb shell
chmod 06755 /system/bin/su
chmod 0644 /system/app/Superuser.apk
chmod 04755 /system/xbin/busybox
cd /system/xbin
busybox --install /system/xbin/
exit
exit
Reboot your device.
You will now have root access. Tested and confirmed working by Stryder5 and many others.
Credits:
Stryder5 for testing, confirming, tipping me about working CWM, providing the required drivers, and helping others on the thread. :highfive:
Harry GT-S5830 for the insecure boot image.
fkrone for his recovery revert disabler script and his unofficial working CWM before an official one became available.
Kstarz for posting this same recovery method with his own working CWM in this thread before an official one was out.
evaradar for informing about the release of official ClockworkMod recovery.
Koush for developing ClockworkMod recovery.
Chainfire for developing SuperSU.
Everyone else on this thread for testing, providing feedback and hitting the 'THANKS' button. =)
I have tried my best to give everyone the due credit but if I have missed out on anyone, please do remind me.

Yep, worked like a charm. Got Titanium running and restored all my apps
Btw, check your PM.

Checked...thanks. =) Added the links.

stem/bin/sh: su: can't execute: Permission denied
that is what i always get when i put in the "su"--permision denied

jshaw06 said:
stem/bin/sh: su: can't execute: Permission denied
that is what i always get when i put in the "su"--permision denied
Click to expand...
Click to collapse
You need to boot the unsecure boot.img first.

BTW can you confirm me the insecure boot.img you used? I just provided the link to the thread by Harry GT-S5830 but there were multiple ones posted in that thread, so I'm thinking of adding the direct link to the one confirmed working.

HQRaja said:
BTW can you confirm me the insecure boot.img you used? I just provided the link to the thread by Harry GT-S5830 but there were multiple ones posted in that thread, so I'm thinking of adding the direct link to the one confirmed working.
Click to expand...
Click to collapse
I'm pretty sure I used the one Harry GT-S5830 provided.

I used the one in the OP of that thread.. is there a different one I'm supposed yo use?
Sent from my SGH-T999 using Tapatalk 2
---------- Post added at 06:41 AM ---------- Previous post was at 06:23 AM ----------
It works
Sent from my SGH-T999 using Tapatalk 2

jshaw06 said:
It works
Click to expand...
Click to collapse
Glad to hear
Did you install the OTA before doing this? I gained root before installing the OTA.

Stryder5 said:
Glad to hear
Did you install the OTA before doing this? I gained root before installing the OTA.
Click to expand...
Click to collapse
No issues with installing the OTA after root?
Edit: Just noticed in your sig that you did not install the update.

I installed after ota
Sent from my SGH-T999 using Tapatalk 2

jshaw06 said:
I installed after ota
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
You mean you gained root after you installed the OTA?
---------- Post added at 01:12 AM ---------- Previous post was at 01:11 AM ----------
apzalo said:
No issues with installing the OTA after root?
Click to expand...
Click to collapse
I gained root, but haven't installed the OTA yet.

when I boot the boot.img. It rebooted and got stuck at the nexus boot animation for a long time. Does it suppose to do that?

Yes sorry gained root after OTA
Sent from my SGH-T999 using Tapatalk 2

Elemenopee said:
when I boot the boot.img. It rebooted and got stuck at the nexus boot animation for a long time. Does it suppose to do that?
Click to expand...
Click to collapse
Nope, it isn't. Try again...it's safe to try as many times as you want since we're not flashing the boot image; merely booting from it, which is temporary and doesn't last after reboot. Hope it works on the next try.

After step 8 we boot up the phone normally and then start running those adb commands? I'm assuming that's what you mean by "Once booted into Android successfully..." right? Sorry if it's an obvious question, just making sure!

quick question to ease my mind: if i needed to return this device for warranty purposes, how would i revert all of this back to stock? i know its something to do with the stock factory image, or am i wrong?

Ngo93 said:
After step 8 we boot up the phone normally and then start running those adb commands? I'm assuming that's what you mean by "Once booted into Android successfully..." right? Sorry if it's an obvious question, just making sure!
Click to expand...
Click to collapse
Step 8 itself will boot up the phone normally into Android, just using that insecure boot image instead of the stock one. And yes, you then just start entering those adb commands. =)

0.0 said:
quick question to ease my mind: if i needed to return this device for warranty purposes, how would i revert all of this back to stock? i know its something to do with the stock factory image, or am i wrong?
Click to expand...
Click to collapse
Best way would be to grab a stock factory image and flashing it. I recently wrote a post on the portal with the links: http://www.xda-developers.com/android/android-4-2-images-for-galaxy-nexus-nexus-7-4-and-10/
The method can be found at the factory images download page, and is as easy as extracting the image and running the included .bat file while your phone is connected to PC in fastboot mode.

HQRaja said:
Best way would be to grab a stock factory image and flashing it. I recently wrote a post on the portal with the links: http://www.xda-developers.com/android/android-4-2-images-for-galaxy-nexus-nexus-7-4-and-10/
The method can be found at the factory images download page, and is as easy as extracting the image and running the included .bat file while your phone is connected to PC in fastboot mode.
Click to expand...
Click to collapse
so i extract the "occam-jop40c-factory-cd3dc140.tgz" file, then double-click the "flash-all.bat" file?

[Q] [TWRP]Bootloops, can't mount to Windows to put new ROM or saved backup onto phone

My current situation is as follows:
ROM on it is bad and bootloops
Storage was wiped for a pure clean install
TWRP 2.5.0 doesn't seem to have any method to mount while in Recovery
As a result, I cannot boot it up to add the good files and I cannot mount it in Recovery to add the good files
I am at work and as such cannot use ADB.
If I can get it to mount, I can copy over the known good backups or just a known good ROM I can flash. There just doesn't seem to be any way to get it to mount in Windows 7 or 8. Does anyone have any suggestions?

rougegoat said:
My current situation is as follows:
ROM on it is bad and bootloops
Storage was wiped for a pure clean install
TWRP 2.5.0 doesn't seem to have any method to mount while in Recovery
As a result, I cannot boot it up to add the good files and I cannot mount it in Recovery to add the good files
I am at work and as such cannot use ADB.
If I can get it to mount, I can copy over the known good backups or just a known good ROM I can flash. There just doesn't seem to be any way to get it to mount in Windows 7 or 8. Does anyone have any suggestions?
Click to expand...
Click to collapse
Your only option now is to run the Stock ruu and return to stock. Theres plenty of threads on this forum that describe the procedure. You should never wipe the storage just for this reason. its much easier and less time consuming to flash a nandroid backup than having to revert back to stock via the ruu. Good luck and I hope everything works out

wranglerray said:
Your only option now is to run the Stock ruu and return to stock. Theres plenty of threads on this forum that describe the procedure. You should never wipe the storage just for this reason. its much easier and less time consuming to flash a nandroid backup than having to revert back to stock via the ruu. Good luck and I hope everything works out
Click to expand...
Click to collapse
I managed to find a machine I have sufficient privileges on for ADB. I can now push files to it. Do you know off hand what the path needed for TWRP backups is?

rougegoat said:
I managed to find a machine I have sufficient privileges on for ADB. I can now push files to it. Do you know off hand what the path needed for TWRP backups is?
Click to expand...
Click to collapse
should be /mnt/sdcard0/twrp/backups
but you wiped storage. Can you boot into fastboot? if so you can run the fastboot command
fastboot flash nameofrom.zip
you'll have to place the rom zip in the same directory as fastboot but fastboot should interrogate the zip file and flash the correct partitions

wranglerray said:
should be /mnt/sdcard0/twrp/backups
but you wiped storage. Can you boot into fastboot? if so you can run the fastboot command
fastboot flash nameofrom.zip
you'll have to place the rom zip in the same directory as fastboot but fastboot should interrogate the zip file and flash the correct partitions
Click to expand...
Click to collapse
I can get there. The issue is the one zip I have on hand doesn't seem to like being pushed that way. Rather than sit through a gig download I was just going to push a backup of stock I have on hand into the proper folder. At the very least I'd attempt it while downloading a stock+root rom.

rougegoat said:
I can get there. The issue is the one zip I have on hand doesn't seem to like being pushed that way. Rather than sit through a gig download I was just going to push a backup of stock I have on hand into the proper folder. At the very least I'd attempt it while downloading a stock+root rom.
Click to expand...
Click to collapse
ok the correct path according to my phone's file system is /sdcard/TWRP/BACKUPS
if those files don't exsist you can create them from adb shell
mk dir sdcard
cd sdcard
mk dir TWRP
cd TWRP
mk dir BACKUPS
exit out of adb shell by issuing the command exit
the
adb push nameofbackup.win /sdcard/TWRP/BACKUPS

wranglerray said:
ok the correct path according to my phone's file system is /sdcard/TWRP/BACKUPS
if those files don't exsist you can create them from adb shell
mk dir sdcard
cd sdcard
mk dir TWRP
cd TWRP
mk dir BACKUPS
exit out of adb shell by issuing the command exit
the
adb push nameofbackup.win /sdcard/TWRP/BACKUPS
Click to expand...
Click to collapse
Giving it a shot now.

Sorry my syntax was off it's mkdir without a space
Sent from my HTCONE using Xparent BlueTapatalk 2

wranglerray said:
Sorry my syntax was off it's mkdir without a space
Sent from my HTCONE using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
No worries, I'm versed enough commandline wise to know what you were getting at. Unfortunately it seems that random number path for the device chunk has changed since I did my backup(probably because of my wiping and being an overall idiot). The stock+root zip of a rom finished downloading though, so I'm flashing that now. Hopefully that ends this ordeal.
(Edit) Success getting it to be usable again. Now to start from scratch. (/edit)

rougegoat said:
No worries, I'm versed enough commandline wise to know what you were getting at. Unfortunately it seems that random number path for the device chunk has changed since I did my backup(probably because of my wiping and being an overall idiot). The stock+root zip of a rom finished downloading though, so I'm flashing that now. Hopefully that ends this ordeal.
Click to expand...
Click to collapse
good luck! post your results i'd be interested in knowing how it ends up.

Hey rogue.... went through this same problem about four days ago, almost blew my brains out because I thought I would have to smash my phone and return it through the best buy protection plan. Anyways... the ONLY way to fix your problem is to use the Sprint HTC One RUU. Boot your phone into fastboot usb mode and run the RUU. Takes about 10-15 minutes, and will have you COMPLETELY back to stock. From there, you need to start from scratch unlocking and installing the recovery. ViperRom is the only rom that won't bug out your sprint phone atm. Also be sure you relocked your phone before you run the RUU. I'm super busy atm and can't go find the RUU links, but google it and i'm sure you can find it. If not, i'll get you the links later if you pm me. Peace bro and good luck.
---------- Post added at 09:57 PM ---------- Previous post was at 09:51 PM ----------
cburch85 said:
Hey rogue.... went through this same problem about four days ago, almost blew my brains out because I thought I would have to smash my phone and return it through the best buy protection plan. Anyways... the ONLY way to fix your problem is to use the Sprint HTC One RUU. Boot your phone into fastboot usb mode and run the RUU. Takes about 10-15 minutes, and will have you COMPLETELY back to stock. From there, you need to start from scratch unlocking and installing the recovery. ViperRom is the only rom that won't bug out your sprint phone atm. Also be sure you relocked your phone before you run the RUU. I'm super busy atm and can't go find the RUU links, but google it and i'm sure you can find it. If not, i'll get you the links later if you pm me. Peace bro and good luck.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2250904
I know another person suggested this earlier, but failed to mention that sideloading once you're caught in this loop won't work. Run the RUU, unlock, and flash ViperRom.

Boot TWRP, then select “Mount”, then select only “Data” and connect your HTC One to your computer.
Considering you have adb.exe (Windows, part of fastboot.zip) or on Linux:
cd Downloads\ROM.zip
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to Downloads (or any other) folder, then install the ROM.
It should be nearly same running CWM recovery. Hope that helps.

Rooted HTC one, no os, don't know how to push rom
I accidently wiped my os while putting a new rom on. I am INCREDIBLY inexperienced with this and really had no business fooling around with it. Regardless, I have the HTC One rooted with TWRP but cant get the new rom on to the phone. I'm on a mac and android file transfer is not recognizing my phone. Any help anyone could give would be great.

Try putting the rom on a usb stick and using an otg cable then mount it under twrp and flash from there?
Sent from my HTC One using xda app-developers app

Good Info
EazyVG said:
Boot TWRP, then select “Mount”, then select only “Data” and connect your HTC One to your computer.
Considering you have adb.exe (Windows, part of fastboot.zip) or on Linux:
cd Downloads\ROM.zip
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to Downloads (or any other) folder, then install the ROM.
It should be nearly same running CWM recovery. Hope that helps.
Click to expand...
Click to collapse
Thanks for the Info

[Root] Root and TWRP for R

Disclaimer: If you are not comfortable with using Fastboot and ADB and editing system files than this guide might not be for you. At this point this is what I have to offer.
Click here for the unofficial twrp image - Latest version as of 12/27/14
So getting right into it.
1. Turn on ADB mode on the watch by going to about and tapping the build info 7 times.
2. Download ADB and Fastboot utilties
3. Plug the watch into the computer and your phone should vibrate and ask you to accept the computers fingerprint, tick the check box to always allow and hit ok
4. Open up a command prompt or terminal inside of where the ADB utilities are located and enter
Code:
adb reboot bootloader
This next step will wipe your data!
5. Now you should be in fastboot, go ahead and on the terminal use the next code and follow prompts to unlock
Code:
fastboot oem unlock
6. Now after you re-set up your watch again you will need to do step 1 and 3 again.
Please do not skip step 6!
7. Go ahead and issue
Code:
adb reboot bootloader
8. Flash unofficial twrp, make sure the recovery image file is in the same location as fastboot than issue
Code:
fastboot flash recovery YOURIMGNAMEHERE.img
9. Upon successfully doing that you should have twrp installed
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB use the proper name of what you downloaded. Issue
Code:
adb push SUPERSUNAMEHERE.zip /sdcard/
11. Issue
Code:
adb reboot recovery
12. than using the very tiny TWRP and somewhat messed up go ahead and use it to install the supersu.zip under the folder /sdcard
13. Enjoy root and twrp.
I will make this guide into a much easier Java program in the very near future to make it easier to use.
This was typed up pretty fast and it is kinda hacky, I will work on a bat script and a shell script if we have enough osx users here. I'm sure someone will come along and make this better if I don't get around to it.
Credits:
Dees-Troy for his TWRP support for dory our fish brother device which worked on our device
Chainfire for all his hard work these many years

Q: ADB complains there is no device listed.
A: Install universal ADB drivers and then go to device manager and under the device with a yellow warning icon go to update driver, Browse my computer, let me pick from list of device drivers, than Google ADB interface. If it still complains turn off debugging, than turn it back on, revoke authorization, then disable and re-enable again.

One more just in case.

Great work!!
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?

hatefuel19 said:
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
Click to expand...
Click to collapse
The latest supersu is version 2.36 dated 11.27.2014. 1.94 is well over a year old, you need to update for sure that is why you are force closing.

I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!

hatefuel19 said:
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
Click to expand...
Click to collapse
I'm here to help! I'm working on adding other mods to my other thread right now I'm working on getting busybox working.

Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
---------- Post added at 09:31 PM ---------- Previous post was at 09:28 PM ----------
jimmydigital00 said:
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
Click to expand...
Click to collapse
Disregard I did it again and for some reason it worked. Maybe I need to reboot first.

Recovery
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?

adamrobles said:
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
Click to expand...
Click to collapse
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app

reflashed
tonu42 said:
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.

adamrobles said:
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
Click to expand...
Click to collapse
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.

tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
Thank you for that information, I stopped the download of the dump.
Downloading the stock recovery now.
---------- Post added at 02:24 PM ---------- Previous post was at 02:10 PM ----------
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
I must have skipped a step...
installed stock recovery
booted into the watch system
enabled adb debugging
reboot to bootloader
install your recovery image
rebooted
pushed supersu
rebooted to twrp
installed supersu
rebooted to system
adb shell - verified root!
You are awesome! Thank you for taking the time to help me!

HYPE for 5.0.1
'm Hype! can't wait to flash the first 5.0.1 system dump on this as stated by +Darek Ross we MAY be receiving update as early as today!

I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...

zvieratko said:
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
Click to expand...
Click to collapse
My guide is setup like the one you put there. In order to get adb working again you need to re setup the watch step 6. Read the instructions carefully. I'll post a batch script later to simplify this.
Sent from my A0001 using XDA Free mobile app

Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there

zvieratko said:
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
Click to expand...
Click to collapse
By default debugging is disabled, I'm not sure how you were able to issue an ADB command on step 7 with out first performing step 6.

Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)

zvieratko said:
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
Click to expand...
Click to collapse
Ah I see, yea the guide is written as the absolute minimum to work right now. Like I said later today I'll try to post a script that automates all of this, its much easier.

bricked, stuck in recovery

Hi there!
I have a TX1085, it is already unlocked and rooted and has the CM Recovery installed. But before the CM Recovery I had the TWRP Recovery installed and tried to use it to flash CM12, which I had put on the SD-Card. It kept on telling me that mounting the system failed. Unfortunately I wiped everything via TWRP Recovery without creating a backup. Then I installed the CM Recovery to try again. Now, if I try to flash via CM Recovery (apply update) it doesn't show anything in my internal storage and I can't connect via adb using Ubuntu (Terminal tells me either "device not found" or "device offline".)
Any suggestions?
Greets

I have no idea what I'm talking about, I'm still learning all this, but in your case, from what I've learnend so far I'd maybe try the "fastboot boot recoveryfile.img" command, loading TWRP or CMrecovery into the ram of the phone and start flashing from there?! (just an idea)

psssss said:
I have no idea what I'm talking about, I'm still learning all this, but in your case, from what I've learnend so far I'd maybe try the "fastboot boot recoveryfile.img" command, loading TWRP or CMrecovery into the ram of the phone and start flashing from there?! (just an idea)
Click to expand...
Click to collapse
Thanks for your suggestion! Unfortunately I don't know how to get access to my phone again via computer, which is - I think - because I deleted the system on it. Or how else could I get into the ram? This is my first time to flash a phone, so I really need some guidance.

pyq said:
Thanks for your suggestion! Unfortunately I don't know how to get access to my phone again via computer, which is - I think - because I deleted the system on it. Or how else could I get into the ram? This is my first time to flash a phone, so I really need some guidance.
Click to expand...
Click to collapse
Go to bootloader first the use the commands fastboot boot recovery.img
Try using twrp, everybody is working with it now.
Sent from xt1096 with Marshmallow!

josuearisty said:
Go to bootloader first the use the commands fastboot boot recovery.img
Try using twrp, everybody is working with it now.
Sent from xt1096 with Marshmallow!
Click to expand...
Click to collapse
I tried, but the Terminal gives me that:"cannot load 'recovery.img': No such file or directory". I'm in fastboot, is that correct? Is there another way?
Right now I can't (or don't know how to) switch back to TWRP, but I'll keep it in mind. Thanks for your help!

did you installed android sdk and adb drivers? if yes try to open cmd in sdk directory

pyq said:
I tried, but the Terminal gives me that:"cannot load 'recovery.img': No such file or directory". I'm in fastboot, is that correct? Is there another way?
Right now I can't (or don't know how to) switch back to TWRP, but I'll keep it in mind. Thanks for your help!
Click to expand...
Click to collapse
Look for adb in 15 seconds and install it, go to directory where fastboot is located.
Download twrp image and rename it or something and copy recovery.img to fastboot directory.
If there is no recovery.img in that directory it will fail.
After you copy and rename recovery.img then you will be able to do what I told you.
If you are new at modding, you have to take it easy and ask everything before doing it.
Sent from xt1096 with Marshmallow!

kaktusmaier125 said:
did you installed android sdk and adb drivers? if yes try to open cmd in sdk directory
Click to expand...
Click to collapse
I am using Linux without Android SDK, but I have working fastboot and adb installed.

josuearisty said:
Look for adb in 15 seconds and install it, go to directory where fastboot is located.
Download twrp image and rename it or something and copy recovery.img to fastboot directory.
If there is no recovery.img in that directory it will fail.
After you copy and rename recovery.img then you will be able to do what I told you.
If you are new at modding, you have to take it easy and ask everything before doing it.
Sent from xt1096 with Marshmallow!
Click to expand...
Click to collapse
I managed to get TWRP working again. I have the .zip-File in my Internal Storage, but can not mount System. How can I do this?
Edit: Wiping data seems to be working but I get the output "E:Unable to mount '/system'". When I try to install the ROM it fails to mount an unmount /system and gets stuck at "Patching system image unconditionally..."

pyq said:
I managed to get TWRP working again. I have the .zip-File in my Internal Storage, but can not mount System. How can I do this?
Edit: Wiping data seems to be working but I get the output "E:Unable to mount '/system'". When I try to install the ROM it fails to mount an unmount /system and gets stuck at "Patching system image unconditionally..."
Click to expand...
Click to collapse
try to flash stock firmware

kaktusmaier125 said:
try to flash stock firmware
Click to expand...
Click to collapse
How do I do it? Just put the stock.zip on the phone and flash with TWRP?

pyq said:
How do I do it? Just put the stock.zip on the phone and flash with TWRP?
Click to expand...
Click to collapse
see this post http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
what the model you have
---------- Post added at 09:32 AM ---------- Previous post was at 09:26 AM ----------
file factory is slow so try https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!h9FWBQha
and flow this insturction http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121

pyq said:
How do I do it? Just put the stock.zip on the phone and flash with TWRP?
Click to expand...
Click to collapse
Next time, please ask everything you need before doing something.
I have been modding my phones since the Motorola L7 and I always ask for everything on a new device before start modding.
That way I never bricked my phones.
Sent from xt1096 with Marshmallow!

kaktusmaier125 said:
see this post http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
what the model you have
---------- Post added at 09:32 AM ---------- Previous post was at 09:26 AM ----------
file factory is slow so try https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!h9FWBQha
and flow this insturction http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Click to expand...
Click to collapse
This post seems to be aiming for Windows users, but I am using Linux. Could I still use it? If yes, how?

josuearisty said:
Next time, please ask everything you need before doing something.
I have been modding my phones since the Motorola L7 and I always ask for everything on a new device before start modding.
That way I never bricked my phones.
Sent from xt1096 with Marshmallow!
Click to expand...
Click to collapse
That is why I asked you how to get CM installed with TWRP. I had the mounting problem at the very beginning already. How can I get CM installed now?

pyq said:
That is why I asked you how to get CM installed with TWRP. I had the mounting problem at the very beginning already. How can I get CM installed now?
Click to expand...
Click to collapse
The commands I wrote before, use the same steps but instead use the cm recovery.
I hope you understand!
Sent from xt1096 with Marshmallow!

pyq said:
I managed to get TWRP working again. I have the .zip-File in my Internal Storage, but can not mount System. How can I do this?
Edit: Wiping data seems to be working but I get the output "E:Unable to mount '/system'". When I try to install the ROM it fails to mount an unmount /system and gets stuck at "Patching system image unconditionally..."
Click to expand...
Click to collapse
In the newer versions of TWRP the first screen should show a Mount button. In that screen you should be able to mount any of the partitions.

josuearisty said:
The commands I wrote before, use the same steps but instead use the cm recovery.
I hope you understand!
Sent from xt1096 with Marshmallow!
Click to expand...
Click to collapse
If I use the "fastboot boot CM_recovery.img" command the phone installs it and then starts into TWRP. Except for that nothing changes. How can I continue?

rotorbudd said:
In the newer versions of TWRP the first screen should show a Mount button. In that screen you should be able to mount any of the partitions.
Click to expand...
Click to collapse
If I try to make a tick (as to mount) system the phone vibrates but doesn't tick system, so I can't mount it this way.

pyq said:
This post seems to be aiming for Windows users, but I am using Linux. Could I still use it? If yes, how?
Click to expand...
Click to collapse
Yes you can