This the G3 to J1 OTA. A lot of people are still on the G3 build because of root issues. As some of you may have found out, the hard way, the J1 update does not allow the older root methods and a new method has not been found forcing people to not accept the OTA! This fixes that!
What I have done here is grab the OTA and neutered it so it would not install the "aboot" and not install the "recovery" partitions. On top of that I have pre-rooted it with the latest SuperSU and added my unsecure boot.img. So you get the following...
Features
New Radios / Appropriate firmware
New Kernel
OS changes from G3 to J1
Root will now be in the /system folder so if you wipe data root is still with you :highfive:
You must be on the 100% stock G3 base with root and Clockwork MOD Recovery. If you modified any files you need to restore them because the script checks the files on the /system partition to make sure it has not been tampered with! For example if you installed Gmail from the 4.2 build the script will error out and NOT flash!
If you need to return to stock G3 Base you can do it easy this way: http://forum.xda-developers.com/showthread.php?t=1885558. Thats what I had to do to root the tab so I know for a fact the OTA works 100% off the dump that MrHyde03 made!
Now for the official instructions
Instructions:
Must be at full stock G3 base with no modifications to the system files other than root!
Must have CWM recovery installed, must have the unlocked boot loader installed.
Uninstall Superuser (Yes, uninstall it!)
Copy Patch to Device
Reboot to recovery
Flash Patch. Takes about 3 to 4 minutes to patch.
Profit!
Thanks
Thanks out to MrHyde03 and RevosFTS for testing. Brave souls!
And thanks to other few people who tried but modified the system image therefore could not flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD: HERE
MD5: 6FA20263C6DC961C7F3DFCE554D0BC9A
Please hit Thanks!
Reserved
Excellent. Also added a reference to here in the root thread under Step 3.
I've been working with scott trying to flash this update..
I fixed the issue with the gmail 4.2 that I put on my tab.. so that is no longer an issue.. (and that was the only thing I changed in my /system partition)..
Now I'm getting an error status 7... with "assert failed: apply_patch_check (" /system/bin/debuggerd")".. when flashing this... not sure what that is? anyone know?
also I'm on the g3 build
Baseband Version: I705VRLG3
Build Number: IMM76D.I705VRALG3
Sounds to me like it's not finding the file at /system/bin/debuggerd. Open root explorer or equivalent and check to see if that file exists. If not, then I'd go through Step 1b (Method 2 - ODIN) on the root thread again to ensure your system is 100% stock.
nexttonomy said:
I've been working with scott trying to flash this update..
I fixed the issue with the gmail 4.2 that I put on my tab.. so that is no longer an issue.. (and that was the only thing I changed in my /system partition)..
Now I'm getting an error status 7... with "assert failed: apply_patch_check (" /system/bin/debuggerd")".. when flashing this... not sure what that is? anyone know?
Click to expand...
Click to collapse
This
|
|
\/
MrHyde03 said:
Sounds to me like it's not finding the file at /system/bin/debuggerd. Open root explorer or equivalent and check to see if that file exists. If not, then I'd go through Step 1b (Method 2 - ODIN) on the root thread again to ensure your system is 100% stock.
Click to expand...
Click to collapse
Agreed. This OTA tested perfect against your Odin stock so if there is an issue when someone tries to flash then they are not 100% stock system hence a quick odin flash will take care of that!
scrosler said:
This
|
|
\/
Agreed. This OTA tested perfect against your Odin stock so if there is an issue when someone tries to flash then they are not 100% stock system hence a quick odin flash will take care of that!
Click to expand...
Click to collapse
Ok.. I'll do that and try it out again... thanks for the help hyde and scott
EDIT: is this ok to do even though I'm already on G3? also do I need to unlock the bootloader and flash cwm again after doing this?
EDIT 2: I have all the drivers installed and adb recognizes my tab.. but everytime I try to flash this file via ODIN it fails.. this is the error message I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> system.ext4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3: So I checked my /system/bin folder and I have two debuggerd files...
debuggerd which is 364 Bytes
debuggerd.bin which is 29.95K
Do you guys have both these files?
nexttonomy said:
Ok.. I'll do that and try it out again... thanks for the help hyde and scott
EDIT: is this ok to do even though I'm already on G3? also do I need to unlock the bootloader and flash cwm again after doing this?
EDIT 2: I have all the drivers installed and adb recognizes my tab.. but everytime I try to flash this file via ODIN it fails.. this is the error message I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> system.ext4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you verify all antivirus and firewall programs on your computer are disabled?
Im thinking locked bootloader?
Did you flash the "aboot" like in Hydes thread?
I think its step #3 or 4?
Love it! Looking forward to more of your work.
Warren87 said:
Love it! Looking forward to more of your work.
Click to expand...
Click to collapse
Worked for ya?
Im on an unlocked bootloader... the samsung splash screen is less than a second like it says in mrhydes thread... but I flashed it again just to make sure...
I've been flashing this stuff since the OG droid.. I'm not a noob on this... i'm not sure what is going wrong..
I appreciate all the help.. I'll just keep playing with it to see if I can figure it out
nexttonomy said:
Im on an unlocked bootloader... the samsung splash screen is less than a second like it says in mrhydes thread... but I flashed it again just to make sure...
I've been flashing this stuff since the OG droid.. I'm not a noob on this... i'm not sure what is going wrong..
I appreciate all the help.. I'll just keep playing with it to see if I can figure it out
Click to expand...
Click to collapse
Hmmm. Odd.
The only time I got that messaage was when the bootloader is locked. I dont know then.
Let us know if you figure it out...
Also can you confirm the status of the current build you are on? And did you try a newer version of Odin? Maybe its just an Odin issue. What ver are you on?
scrosler said:
Hmmm. Odd.
The only time I got that messaage was when the bootloader is locked. I dont know then.
Let us know if you figure it out...
Also can you confirm the status of the current build you are on? And did you try a newer version of Odin? Maybe its just an Odin issue. What ver are you on?
Click to expand...
Click to collapse
Odin 3.04 is the version I use and have listed in the instructions. Think it could have something to do with your extra compressed version?
Try downloading the first link again and make sure your using the PDA section. You could even try running Odin "Run as administrator". Also can try rebooting your computer (had a similar issue a while back and a reboot of both my laptop and tablet solved it. Shut down your tablet completely then boot directly into Download (power + vol down). Plug it in AFTER it boots into Download and let us know.
MrHyde03 said:
Odin 3.04 is the version I use and have listed in the instructions. Think it could have something to do with your extra compressed version?
Try downloading the first link again and make sure your using the PDA section. You could even try running Odin "Run as administrator". Also can try rebooting your computer (had a similar issue a while back and a reboot of both my laptop and tablet solved it. Shut down your tablet completely then boot directly into Download (power + vol down). Plug it in AFTER it boots into Download and let us know.
Click to expand...
Click to collapse
No, its the not the file...
<OSM> Checking MD5 finished Sucessfully..
If it was that would have failed.
I am more than sure this is due to some sort of write protection.
Should I still be receiving the OTA install warnings after flashing this? I'm going to freeze SDM for now.
JelloB said:
Should I still be receiving the OTA install warnings after flashing this? I'm going to freeze SDM for now.
Click to expand...
Click to collapse
No, but what you need to do is tell it to check again and it will come back and say that it is already installed and there is no update.
scrosler said:
No, but what you need to do is tell it to check again and it will come back and say that it is already installed and there is no update.
Click to expand...
Click to collapse
I originally postponed it for an hour and then froze SDM. When I unfreeze and go into software update it only gives me the option to install deferred update now.
I'm not terribly concerned about this because I can just leave it frozen but it's curious that I'm receiving the update. All of my software matches those listed on your screenshot above.
JelloB said:
I originally postponed it for an hour and then froze SDM. When I unfreeze and go into software update it only gives me the option to install deferred update now.
I'm not terribly concerned about this because I can just leave it frozen but it's curious that I'm receiving the update. All of my software matches those listed on your screenshot above.
Click to expand...
Click to collapse
You have to ignore it then Select "Check Now"
That's what I had to do... Either that or do a factory reset. I know that will fix it for sure :angel:
And if you did let it go it would just fail immediately so no worries.
Ok cool. I'll check it after the original hour deferment expires and if I have to I'll factory reset.
Thanks for your work on this. Looking forward to future installments.
Related
Hi i am on a captivate i896. I tried to install I897UCKF1. Everything was fine till it had to reboot after installation then i couldn't do anything. I can't install stock rom, the phone reboots with att logo and it doesn't do anything. I think its the bootloader that is messed up and i don't know how to install the older ones or just to be able to get back to rogers 2.1 stock or ATT 2.1 stock. I am always stuck at this screen :
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I897UCKF1_CL273832_REV02_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I897UCKF1_CL1017518_REV02.tar.md5 is valid.
<OSM> SGH-I897-CSC-ATTKF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
When i try to install JF6 it stalls at File Analysis....
Please help.
try and get it into download mode. Its not bricked justyet.
accordztech said:
try and get it into download mode. Its not bricked justyet.
Click to expand...
Click to collapse
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?
ramih2085 said:
i tried to get in download mode and i can but i just can't get to install any stock roms i can't do anything. Do you know if i can install the booloaders or anything?
Click to expand...
Click to collapse
Restart your computer and if running windows vista or 7 make sure you run Odin as an administrator and possibly even compatibility mode. I have had that problem before and a restart fixed it.
Sent from my GT-I9000 using XDA Premium App
tried it, still the same thing...
i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...
ramih2085 said:
i read something about bootloaders are different for the gingerbread build than the normal eclair and froyo. I don't know if i have to do something different. I just wanna get back to stock 2.1 from there i can find my way out...
Click to expand...
Click to collapse
Did you try the Odin 1 click for stock JF6 posted by Designgears in the development forum? It flashes both bootloaders that are need to get back to stock.
yes i did, and it stalls at file analysis....usually it works but now i don't know why!
ramih2085 said:
yes i did, and it stalls at file analysis....usually it works but now i don't know why!
Click to expand...
Click to collapse
Try a different usb port and/or cable.
jhernand1102 said:
Try a different usb port and/or cable.
Click to expand...
Click to collapse
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.
jhernand1102 said:
I has an issue like this once where it would get stuck during the flash and my screen would turn different colors. I got it to work by using the full odin where you can select the pda & pit files. Give it a try.
Click to expand...
Click to collapse
i did that too, nothing worked...
anyone has an idea of what to do?
ramih2085 said:
anyone has an idea of what to do?
Click to expand...
Click to collapse
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.
ramih2085 said:
I tried all the usb ports on my computers. Odin always detects my phone but for some reason i can't install anything on it.
Click to expand...
Click to collapse
I have the same problem . Please help ! Thankss.
ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
my AT&T Captivate is 2.2 stock with root,unlocked . I flash Stock+voodoo-froyo I897 UCKB1.tar. it said FAIL. try to go back 2.1 stock but it can't do anything.Please help! Thanks
ramih2085 said:
i did that too, nothing worked...
Click to expand...
Click to collapse
what is PIT files ? and how can I get it ? I want to try it .Thanks .
Mr. Janderson said:
Try using the Odin version provided in this thread:
http://forum.xda-developers.com/showthread.php?t=1127249
It should restore to stock 2.3.3 Gingerbread. Not sure if being a UCKF1 poses a problem in your device or location, but I suppose it's worth a shot. Note that the rest of the instructions is to root the device, you don't need to do all those other steps. Just download the Odin One-Click, and try it out. Regards.
Click to expand...
Click to collapse
i tried that and here is the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
also for the pit file, it is usually included in the zip file with odin 3 click so if you download odin 1 click, u dont need that file.
captivate bricked
flashing power off charging logo when try to reboot . no down load mode cant do sh%t.help please
See the "Captivate Connection Issues and Download Mode Help" that is linked in my signature below.
If that does not help then...
Sounds like you are gonna need a JIG. See my signature link below for links to how to make one or where to buy one.
When you get back into download mode, you are gonna need to flash a Stock Firmware of your choice. There is a sticky thread in the Captivate Development Forum that you will need to see for those.
I know that this is probably another post in a series of desperate to get back to ICS for GB, but please understand me, I did not want to get my phone is a brick
I used the CheckROM NoteHD ™ V6. I tried to go to Criskelo LPY V3's ICS ICS. I restarted my phone into recovery and I flash: AbyssNotekernel42RedTouchCustomLogo.zip
Then I reboot and recovery (the recovery RedTouch) I did factory reset, wipe and wipe cahce Dalvik cache and then and flash Criskelo LPY V3's ICS ICS. When the flash ended (I did not have any information about errors) successfully I restarted my phone. My phone Restarted a few times and finally started to Criskelo's ICS ICS LPY V3.
But I wanted to return to the previous rom. Perhaps I did wrong, but I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip (I thought that this way I can upload my copy of the rom GB) .... but after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3
Just notice another problem, not sure if it is when I tried binary updating SU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screen was made by another user, but for me it is exactly the same.
Everything indicates that I have root - titanium works and I can copy and delete any file in the system
Now the question:
How should I go back to GB (whether it is better not to do it?). Please help me what should I do step by step?
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Sent from my GT-N7000 using Tapatalk 2
sotiris20 said:
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Click to expand...
Click to collapse
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
Its not the "wrong way".Flash a clean Rom now,not your backup. Maybe your backup file is corrupted. If you want try Pc-Odin as I said before. Your choice...
Anyway, hope you'll figure it out.
Sent from my GT-N7000 using Tapatalk 2
OK I trust you
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/showthread.php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
abhisahara said:
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
Click to expand...
Click to collapse
not because the flash: AbyssNotekernel42RedTouchCustomLogo.zip is not succesfully -> my phone freezes during this operation, and then restarts
addition, one user wrote:
Entropy512 said:
Don't flash a GB kernel from recovery! Odin/Heimdall it! If you are unable to flash kernels with Odin/Heimdall, you may be suffering from eMMC damage.
Click to expand...
Click to collapse
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
chasmodo said:
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
Click to expand...
Click to collapse
I am afraid that most
What do you think should I do to try to flash with the hope of GB?
andreww88 said:
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
Click to expand...
Click to collapse
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
kamilloo83 said:
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
Click to expand...
Click to collapse
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
andreww88 said:
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
Click to expand...
Click to collapse
ufff... I hope...
ask again:
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/show....php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6 ??? ....
Yes, that is thread you need to follow.
You can root by following Dr.Ketan's steps too.
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
kamilloo83 said:
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
Click to expand...
Click to collapse
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
andreww88 said:
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
Click to expand...
Click to collapse
I must download anotheher ROM... one moment...
kamilloo83 said:
I must download anotheher ROM... one moment...
Click to expand...
Click to collapse
Maybe even try LPF ICS?
It might just have been a bad download, but the MD5 checked good it looks like so I don't know. I'd like someone else to say something to try to help.
Try repartitioning the device. To do so use simply set the right pit file in odin.
rupalazzi said:
Try repartitioning the device. To do so use simply set the right pit file in odin.
Click to expand...
Click to collapse
can I use it with ROM: N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5
together in PC ODIN?
I tried to restore my SGN image using CWM but after the phone boot, it just stuck at welcome screen. After a long wait, I decided to reflash my rom.
When I tried to flash the ROM, it just stuck at
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLP9_N7000OLBLP6_N7000DXLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.img
<ID:0/012> NAND Write Start!!
<ID:0/012> factoryfs.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried using ICS and GB. Same result. If I'm going into Recovery Mode, this error come out.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Help me please..
Please tell me you were not on ics when you tried to restore using cwm?
Sent from my GT-N7000 using xda premium
I'm on ICS. Even the image that I want to restore also on ICS as well.
Last time I try, I received this error
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXLP9_N7000OLBLP6_N7000DXLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> cache.img
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can't someone make somthing like this for the Samsung GT-N7000, Samsung I9220?http://forum.xda-developers.com/archive/index.php/t-1506330.html
Where you on the stock ics kernal?
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
carbonassassin said:
Where you on the stock ics kernal?
Click to expand...
Click to collapse
I'm not sure but I'm using stock ROM
rilpromen said:
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
Click to expand...
Click to collapse
Let me try.
You can back-up and wipe cache and dalvik cache with any kernel. Full wipe and restore should be done only with abyss kernel.
J3batDerhaka said:
I'm not sure but I'm using stock ROM
Let me try.
Click to expand...
Click to collapse
There's a chance you may have corrupted you emmc, read up about the emmc hard brick bug NOW before you do anything else
Sent from my GT-N700 running LiquidSmooth and Carbon Tweaks
rilpromen said:
Try downloading and flashing a pre rooted gb rom http://forum.xda-developers.com/showthread.php?t=1535025 in PC ODIN.
Preferably the whipe version.
Click to expand...
Click to collapse
failed.
carbonassassin said:
There's a chance you may have corrupted you emmc, read up about the emmc hard brick bug NOW before you do anything else
Sent from my GT-N700 running LiquidSmooth and Carbon Tweaks
Click to expand...
Click to collapse
where do i find article about emmc hard brick bug? i tried to find it in XDA but couldn't find it.
Read here about brickbug...
http://forum.xda-developers.com/showthread.php?t=1659768
Theres also a thread on repartitioning the data partition to bypass any corrupted sectors mentioned in that thread.
Sent from my GT-N7000 using xda premium
tqvm..
sorry. my english not so good. so, i quite lost and couldn't understand.
Basically, theres a bug in most ics kernels that will corrupt your data memory to the point where the only way to fix it is to return your device to samsung for a motherboard replacement... Or you can repartition the chip so you miss out the bad memory sectors, usually you'll lose about 3 or 4gb of space.
The only way to tell if this has happened will be to flash a stock gb rom and kernel using pc odin, check dr. Ketans thread in the stickies of rom development section to get a gb rom. If that still gets stuck at factoryfs.img then its likely youre bricked and will need to get your warranty replacement.
Dont do any more wipes or restores while on ics!!!
Sent from my GT-N7000 using xda premium
Heres another thread on brickbug...
http://forum.xda-developers.com/showthread.php?t=1633938
Sent from my GT-N7000 using xda premium
wah!! TQ for the explanation. After I tried to installed GB, it still stuck at factoryfs.img. Maybe I need to send my phone to Samsung.
Try connecting the usb cable directly in one of the ports in the back of the pc (directly in the motherboard) then try reflashing.
Me too
stuck
went from stock ics kernel via mobile odin ever root.
tried to change to mid rom (previously been on)
cwm install zip abyss kernel
restore midteam1.4.2
copies a lot of files ok
says can't restore /system!
sometimes says can't restore /data!
still have cwm
availably working is
cwm
abyss red touch thing
(I've already tried format /data -as it was already fubared- seems fine no error echo, obviously not fix)
pc odin
likewise mine gets stuck completely as previously described.
how do we send to samsung? how much cost?
rilpromen said:
Try connecting the usb cable directly in one of the ports in the back of the pc (directly in the motherboard) then try reflashing.
Click to expand...
Click to collapse
I tried to every USB port at my PC and notebook. Still not working.
quatzar said:
Me too
stuck
went from stock ics kernel via mobile odin ever root.
tried to change to mid rom (previously been on)
cwm install zip abyss kernel
restore midteam1.4.2
copies a lot of files ok
says can't restore /system!
sometimes says can't restore /data!
still have cwm
availably working is
cwm
abyss red touch thing
(I've already tried format /data -as it was already fubared- seems fine no error echo, obviously not fix)
pc odin
likewise mine gets stuck completely as previously described.
how do we send to samsung? how much cost?
Click to expand...
Click to collapse
Where are you from? I'm not so sure in Malaysia do they care about rooting or not because my experience, I sent rooted Galaxy Tab to Samsung and they just fix the device FOC within warranty period. I'm going to send my SGN by this week.
Hi Everyone
VIDEO:
https://www.youtube.com/watch?v=94vIeinaddQ
i will show you how to root the Samsung galaxy mini 2 S6500D
and i will move step by step in this tut as i will Root my device as well, I've Unrooted it so i can show you every step
ok, so first of all there is some files that you need to download first:
1- you must have the ADB drivers for your phone and you do that by downloading Samsung kies
just google it and you will find it
2- download this rar file here
Ok so lets get started
- After Downloading Samsung Kies connect your Phone to the pc so the Kies can detect it and install its drivers.
- grab your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( its really advisable to be fully charged, or at least 90% or so ) things can get really bad if the phone turns off while rooting :silly:
- Trun off the phone,Boot your phone in ( Download mode ) you can do that by pressing Vol (down) and Home and power key all at once, after that you should get to this screen:
just press the volume up to ignore the warning To proceed.
Then connect your phone to the pc and open Odin3 v1.85.exe from the rar(mini2.rar) that you downloaded and extracted
then press the PDA button and choose the other file called ( clockworkmod-5.0.2.8.tar.md5 )
ok, before we continue you should take care of something
if you get Exactly this screen, then you did something wrong
as you see in the rec circle Odin did NOT detect your phone
-its either not connected probably or its drivers is not installed
so make sure you check both of these things
now if you get THIS screen with Oding detecting your phone then you are ready to go
press the PDA button and load the file called ( clockworkmod-5.0.2.8.tar.md5 )
then press start,If you see pass with green background make sure you did it right
after that CLOSE, you must COLSE odin, just exit it.
Now turn off your phone again and boot it in ( REcovery mode ) you can do this by pressing both of the volume buttons and the home and power key, so basically you just press all the buttons at the same time.
as you see it will say GT7500 but its ok, :highfive:
You should get this screen
remember your phone is still connected to the pc the whole process
Now open the other file
AGAIN, if you get this kind of error ( device not found )
Then you you probably did the same thing and proceed without making sure of finishing the prev.step.
But if you did it correctly, you should see this:
it MIGHT (probably will) fail the first time, just exit and run the file again to make sure.
Then you are ready to go
now you will be automatically on the first option ( reboot system now ) just press the home key and the phone will reboot
open the app menu and you should see ( super user ) installed on your phone
to make sure you are rooted just go to the google store and search Titanum backup
install it and you will see it Require the super user request to proceed,
or you can just search for any root checker app as well
https://play.google.com/store/apps/details?id=burrows.apps.rootchecker
many thanks to the people who find out the way to root the phone :highfive:
i just LOOOVE to create Tutorials :good: :victory:
if you have any questions feel free to ask in the comments )
Good tutorial.
I'm glad that we have a dev forum for mini II. First stiky posts must be: how to root, how to install a custom ROM, how to go back to stock.
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
rhisendark said:
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
Click to expand...
Click to collapse
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
joey_W said:
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
hayta77 said:
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
Click to expand...
Click to collapse
My meant your problem from cable usb or port usb you pc try orther usb or orther pc.. CMIIW
Sory for my bad english
Sent from my GT-S6500D using xda app-developers app
..
It's working great
But how to revert back to original recovery??
Just flash a stock rom.
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2
Thanks for this great tutorial :laugh:
I've made a Video
S6500L
Hello am asking around with no answers but whats the difference with the S6500L and the other models and will this rooting process and the other roms work on it? Thanks in advance
Thx for the TUT, 2 quick question.
Do you have a list with apps can uninstalled safe?, or know the link in the forum with this info?
It will increase the bin counter(number) after installing CWM and rooting?
nikobadboy said:
It will increase the bin counter(number) after installing CWM and rooting?
Click to expand...
Click to collapse
yes after installing CWM using odin
Thanks , this vid help me a lot couse this is my first android phone
Sent from my GT-S6500D using xda app-developers app
I cant find Odin3 v1.85.exe in mini2 rar are (clockworkmod-5.0.2.8.tar.md5 and RootMe) and in Root me are (run me and a folder named "files")
Ok I google it and I downloadit!
Now I can not boot in Recovery mode, I try and try but it boots normaly and not in Recovery.
And again I din't disconect my USB cable before I try to boot in Recovery, so it didn't, but with the cable disconectid it was all good and now my phone is root.
Everyone please see the video.
THANX MAN!!!
nice work
Sent from my Optimus Net using xda app-developers app
How to Unroot ?
Hi , it is great rooting tutorial so thanks
But i really want to know how did you unroot your phone
Because my friend want to it with his phone so pleas help
thx m8 good tutorial for first time users. :good::highfive:
Regards
MB from Holland
Okay I've had my phone rooted for awhile and I was trying to watch a movie and the movie kept buffering and apps were running very slow. So I decided I would try to remove some of the bloatware to see if it helped. I installed Root Uninstaller by KunKunSoft (GooglePlay Store) and selected a bunch of packages to remove that I thought would be safe enough to remove from my device... After the restart the phone never booted back up, it stays on the Verizon logo screen until phone dies, if I plug it up while it reboots it just keeps on Verizon logo screen with the 4 or 5 colored dots running at bottom and device get super hot.. I've left it going overnight and it never started up. I am thinking I screwed something up but I don't wanna lose my apps/data I have on device... I found out later that my internet was down and that was what was causing all the slowness on my device later which really has bummed me out about screwing my phone up.
Can anyone help me pls?
This is the root process I used back in December 2017 https://forum.xda-developers.com/galaxy-note-8/development/root-samfail-galaxy-note8-t3685340
This is the app I installed this weekend that I somehow screwed my phone up with https://play.google.com/store/apps/details?id=com.kunkunsoft.rootuninstaller
Thanks in advance
Boot into recovery, Volume up, Bixby button and power button and then factory reset see if that helps
KevandLynds said:
Boot into recovery, Volume up, Bixby button and power button and then factory reset see if that helps
Click to expand...
Click to collapse
Couldn't get it in boot into recovery, tried that several times. Not 100% but I don't think it has a recovery with that root process but what do I know... I've messed up my phone
Even if recovery worked a Factory Reset would erase all data which I would like not to have to do if at all possible unless its a last resort and no other way to fix it. But thats (if) recovery boot would work.....
EBtestDroid said:
Couldn't get it in boot into recovery, tried that several times. Not 100% but I don't think it has a recovery with that root process but what do I know... I've messed up my phone
Even if recovery worked a Factory Reset would erase all data which I would like not to have to do if at all possible unless its a last resort and no other way to fix it. But thats (if) recovery boot would work.....
Click to expand...
Click to collapse
Can you go to download mode and flash stock? I believe using home_csc would not wipe, if I'm not mistaken.
sefrcoko said:
Can you go to download mode and flash stock? I believe using home_csc would not wipe, if I'm not mistaken.
Click to expand...
Click to collapse
Thank you for your help and reply.
Sorry been crazy busy lately. In a panic about this phone.. I have very important photos on this phone that I can not lose.
I lost my home and everything in it last year and I am in process of a claim with my insurance company. The phone has A LOT of photos of my home and the damage. I never backed up the photos or attached a cloud or anything so I'm in a mess.
Can anyone confirm that if I flashed the home_csc that it wouldn't wipe such data since sefrcoko isn't 100%? Hopefully if that is the only way I can learn how to do it without making any mistakes
sefrcoko said:
Can you go to download mode and flash stock? I believe using home_csc would not wipe, if I'm not mistaken.
Click to expand...
Click to collapse
Ok so no one has given any other suggestions or confirmations so I decided to take the plunge. I went into download mode and loaded my phones home_csc into Odin and flashed it. However there isn't any change. Phone wont boot up. Stays on Verizon logo with dots running across until phone dies of plugged in the phone just gets super hot and stays on that screen. Scared to leave it plugged in long with as hot as it gets. I've left it going about 4 hrs.
Please chime in if you know how to fix such issues (
EBtestDroid said:
Ok so no one has given any other suggestions or confirmations so I decided to take the plunge. I went into download mode and loaded my phones home_csc into Odin and flashed it. However there isn't any change. Phone wont boot up. Stays on Verizon logo with dots running across until phone dies of plugged in the phone just gets super hot and stays on that screen. Scared to leave it plugged in long with as hot as it gets. I've left it going about 4 hrs.
Please chime in if you know how to fix such issues (
Click to expand...
Click to collapse
Hi, did you load the other files in Odin too, or just home_csc? You should be loading the other files before flashing, along with either home_csc (which doesn't wipe data) or csc (which does wipe data).
In your case use home_csc, since you want to keep your data intact and are not changing csc. The regular csc file should usually only be used when you're flashing firmware that has a different csc than your current one (and therefore requires the wipe in order to avoid conflicts with the old csc).
sefrcoko said:
Hi, did you load the other files in Odin too, or just home_csc?
You should be loading the other files before flashing, along with either home_csc (which doesn't wipe) or csc (which wipes). In your case use home_csc, since you want to keep data intact are not changing csc.
The regular CSC file should usually only be used when you're flashing to firmware that has a different CSC than your current one (and therefore requires the wipe for the new csc to work properly without conflicting with the old one).
Click to expand...
Click to collapse
No I only loaded that single home_csc file. Okay, awesome! I didn't wanna experiment alone and risk screwing something up and losing anything. Thank you so much for your reply! I will be trying this first thing in the morning and will report back. Thank you again!!
EBtestDroid said:
No I only loaded that single home_csc file. Okay, awesome! I didn't wanna experiment alone and risk screwing something up and losing anything. Thank you so much for your reply! I will be trying this first thing in the morning and will report back. Thank you again!!
Click to expand...
Click to collapse
Sounds good...always best to be safe in a case like this. Keep us posted!
sefrcoko said:
Sounds good...always best to be safe in a case like this. Keep us posted!
Click to expand...
Click to collapse
Alright so I just finished using BL, AP, CP, home_csc and it passed. Only thing I didn't use anything on was USERDATA.
Phone is still on Verizon logo with dots running across like before... I will leave it for awhile and see if anything happens..
I hope I am using the correct files, I am using the factory firmware. As I mentioned before the phone was rooted WITH THIS PROCCESS back in December. I think I have messed up. Sucks being a newbie about all of this stuff.
EBtestDroid said:
Alright so I just finished using BL, AP, CP, home_csc and it passed. Only thing I didn't use anything on was USERDATA.
Phone is still on Verizon logo with dots running across like before... I will leave it for awhile and see if anything happens..
I hope I am using the correct files, I am using the factory firmware. As I mentioned before the phone was rooted WITH THIS PROCCESS back in December. I think I have messed up. Sucks being a newbie about all of this stuff.
Click to expand...
Click to collapse
What files are you flashing? Make sure you're not flashing anything that says U4 in the name or you will not be able to root again until a root method is found for Bootloader v4.
Also.....NEVER use any app that says unroot or anything of that sort without first asking the community. As you can see, it can lead to situations like this.
EBtestDroid said:
Alright so I just finished using BL, AP, CP, home_csc and it passed. Only thing I didn't use anything on was USERDATA.
Phone is still on Verizon logo with dots running across like before... I will leave it for awhile and see if anything happens..
I hope I am using the correct files, I am using the factory firmware. As I mentioned before the phone was rooted WITH THIS PROCCESS back in December. I think I have messed up. Sucks being a newbie about all of this stuff.
Click to expand...
Click to collapse
It might take some time at that screen but should work eventually. If it stays like that for over 30-40min though there's probably something wrong. Might be worthwhile asking in the SamFail thread as they might have more experience with this root method (I have an Exynos).
AP_N950USQS2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT_meta.tar
BL_N950USQS2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
CP_N950USQS2BQK2_CP8012179_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
HOME_CSC_OYN_N950UOYN2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
These are the files I tried using.
I currently have phone plugged into wall charger to keep it on. Its still on Verizon loading boot logo screen.
Crossing fingers here.
Thanks for the help
EBtestDroid said:
AP_N950USQS2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT_meta.tar
BL_N950USQS2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
CP_N950USQS2BQK2_CP8012179_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
HOME_CSC_OYN_N950UOYN2BQK2_CL12461033_QB15680825_REV00_user_low_ship_MULTI_CERT.tar
These are the files I tried using.
I currently have phone plugged into wall charger to keep it on. Its still on Verizon loading boot logo screen.
Crossing fingers here.
Thanks for the help
Click to expand...
Click to collapse
Hmm that seems right but I can't really figure out what's going on...if it is still hanging on that Verizon screen then it did not work as expected. Try posting in the SamFail thread and see if they can offer some extra help. They are more familiar with this particular root method, so there's probably some nuance that I'm missing here.
Edit: Check out this post from the SamFail thread, it basically summarizes what I said, so it looks like that should have worked... Are you using the latest Odin version? And are you using the right firmware (and bootloader version)? Maybe post a screenshot of the files you loaded in Odin and the log it shows once you flashed everything?
https://forum.xda-developers.com/showthread.php?p=76233727
Alright I'll take a picture now.
Never booted up but it didn't get as hot as normally if that matters..
Brb
Jammol said:
What files are you flashing? Make sure you're not flashing anything that says U4 in the name or you will not be able to root again until a root method is found for Bootloader v4.
Also.....NEVER use any app that says unroot or anything of that sort without first asking the community. As you can see, it can lead to situations like this.
Click to expand...
Click to collapse
sefrcoko said:
Hmm that seems right but I can't really figure out what's going on...if it is still hanging on that Verizon screen then it did not work as expected. Try posting in the SamFail thread and see if they can offer some extra help. They are more familiar with this particular root method, so there's probably some nuance that I'm missing here.
Edit: Check out this post from the SamFail thread, it basically summarizes what I said, so it looks like that should have worked... Are you using the latest Odin version? And are you using the right firmware (and bootloader version)? Maybe post a screenshot of the files you loaded in Odin and the log it shows once you flashed everything?
https://forum.xda-developers.com/showthread.php?p=76233727
Click to expand...
Click to collapse
Sorry had to plug up Home PC and figure out how to post pictures, was using work computer earlier.
About to check thread you referred me to, just making sure I got the screenshots up. Should I record my screen to show process or is it not necessary?
Using Odin3_v3.13.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will try this computer and see if anything different happens.
I'm not 100% but I might be loading wrong ones because I think I remember AQ2 but not 100%...
Sorry I don't know how to check but I am very grateful for your patience and help.... ://
You cannot swap between Samfail and stock without wiping. IF you want to keep your data right now just redo the samfail method using hte samfail files.Since you are on blv1 just use samfail v1
Okay getting failed now
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
me2151 said:
You cannot swap between Samfail and stock without wiping. IF you want to keep your data right now just redo the samfail method using hte samfail files.Since you are on blv1 just use samfail v1
Click to expand...
Click to collapse
Okay will try.
Thank you
EBtestDroid said:
I'm not 100% but I might be loading wrong ones because I think I remember AQ2 but not 100%...
Sorry I don't know how to check but I am very grateful for your patience and help.... ://
Click to expand...
Click to collapse
You can check the bootloader revision when you are in download mode. It's the 3rd line up from the bottom that starts with rp swrev :. Mine says B4 because I'm on revision 4 witch is the newest.
View attachment 4504535