Hi guys,
I just flashed the _AllianceROM_JellyBean XXLSC_ALpha1 via rom customizer from JB RocketRom V1. I am now stuck at samsung boot screen and i can't access my nandroid backups generated using CWM as the TWRP doesn't detact them . I would really appreciate if some1 could tell me how can i solve this problem.
Thanks!
Have you tried doing a factory reset?
Use odin and download mode to go back to any stock rom as a second option
I didn't have the chance to enable usb debugging before this happen. Is there any other solutions for this?
Why do you need adb? Boot into recovery and do a resrt
xxeniumxx said:
Hi guys,
I just flashed the _AllianceROM_JellyBean XXLSC_ALpha1 via rom customizer from JB RocketRom V1. I am now stuck at samsung boot screen and i can't access my nandroid backups generated using CWM as the TWRP doesn't detact them . I would really appreciate if some1 could tell me how can i solve this problem.
Thanks!
Click to expand...
Click to collapse
Stuck at samsung boot screen (the one with samsung logo and NOT galaxy note) is called bootloop
You need a fresh new system, try the following:
1- reboot into recovery (Home + Power + Volume UP)
2- Install a safe kernel - I recommend (Abyss GB Kernel)
3- In recovery >> Advanced >> reboot Recovery
4- when it boots up, do Factory Reset/Data Wipe 3 times
5- Do Cache wipe 3 times
6- Go to Advanced & do Dalvik Cache wipe 3 times
7- Go to Mounts & Storage & do FORMAT SYSTEM
8- Go to Mounts & Storage & do FORMAT PRELOAD
9- Now, Re-Flash Alliance ROM & Reboot - The ROM should come with its own Kernel
Furthermore, it is best if you did your nandroid backups in CWM just before installing a new ROM and while being on Abyss kernel (or whatever safe kernel you're intending to use) to avoid MD5 Checksum failure when restoring
Also, I would recommend you do MD5 Checksum on the Alliance ROM zip file and make sure it matches the one in the thread (you'll find it in the OP, almost always next to the download link - I use MD5Check for windows
P.S. If you can't get into recovery, you got a brick issue, refer to brick threads
Best of luck
Related
I was running "TheMIDTeam 1.3" ROM & decided to upgrade to version 1.4 using the so call "safe" method using the "restore" method in CWM. unfortunatly this failed making my phone un bootable but I could still get into "download" mode.
I then thought I'd flash a stock ROM using odin and go from there. I chose the Taiwan N7000ZSLPF_N7000OZSLPF_OZS ROM. This all went OK & everything seem fine. I then relised this was not the ROM for me as it didn't contain "English Australian" amoungst other things. So I thought, no problem, I'l just flash something else more suitable, but no matter what else I flash with odin I keep getting "Force Close" continually once the phone has booted up. I tried many different ROMS from Gingerbread to ICS & keep getting the "Force Close" error.
I then flashed back the Taiwan ROM & it works fine but I am now stuck with that ROM.
The only difference with the Taiwan ROM that I can see was that it contained not just the PDA file like most ROM's but it had a PIT & BOOTLOADER & PDA & PHONE & CSC files. I think this may be where i've gone wrong. Maybe if I could find the stock international versions of all these files I may be able to flash these & get back to stock & start again.
Any help would be greatly appreciated
Anyone know where I can get the stock PIT & BOOTLOADER & PDA & PHONE & CSC
files so I can get back to stock?
I was also confused about the pit & bootloader files. I have used N7000XXLC1 open Europe with PC Odin. I have just sellected PDA file and everything went ok. Now I'm on stock GB without any problems
have you already tried to flash any stock rom trough mobile odin?
jpsb said:
have you already tried to flash any stock rom trough mobile odin?
Click to expand...
Click to collapse
I have tried flashing 2 stock ICS ROMs & 3 different stock Gingerbread ROMs using PC odin only. They all give me continious "Force Close" error messages after bootup making the phone unusable.
If I flash back the Taiwan ROM all seems OK but I;m stuck with this ROM.
If I were you I would get a working version of the taiwan rom on the phone. Then flash a suitable CF kernel. Push a choice custom rom on your Sd card. And then flas that rom from CWM recovery. Only wiping cache and dalvik cache.
Just go into recovery and wipe all caches and factory reset and it will load fine it did it to me until I wiped all caches kept saying Google frame work has stopped
Sent from my GT-N7000 using xda premium
Well.... for quite obvious reasons I wouldnt recommend doing a factory reset on an official ICS kernel.
Something lile sssssuperbrick comes to mind.
This superbrick stuffs is getting on my tits how many people are wiping on there galaxy note using superbrick kernels and having no problems thousands?? hundreds of thousands??? but 20 people brick there phones and it's like Osama bin laden has created this emmc bug in the kernel to get us all.. We all know the dangers people could brick there phones using safe kernels because people make mistakes and or don't follow instructions
Sent from my GT-N7000 using xda premium
Belfia said:
If I were you I would get a working version of the taiwan rom on the phone. Then flash a suitable CF kernel. Push a choice custom rom on your Sd card. And then flas that rom from CWM recovery. Only wiping cache and dalvik cache.
Click to expand...
Click to collapse
Sonic1981 said:
Just go into recovery and wipe all caches and factory reset and it will load fine it did it to me until I wiped all caches kept saying Google frame work has stopped
Click to expand...
Click to collapse
Thanks for the replys.
The Taiwan ROM that works is a ICS ROM, N7000ZSLPF_N7000OZSLPF_OZS.
I have thought of doing a full wipe via CWM but I'm afarid of the "SuperBrick" issue. In fact I was think maybe there is some coruption in the emmc partition already causing the "Force Close" errors I keep getting
KTM690 said:
Thanks for the replys.
The Taiwan ROM that works is a ICS ROM, N7000ZSLPF_N7000OZSLPF_OZS.
I have thought of doing a full wipe via CWM but I'm afarid of the "SuperBrick" issue. In fact I was think maybe there is some coruption in the emmc partition already causing the "Force Close" errors I keep getting
Click to expand...
Click to collapse
Just clear your caches after each flash back from gb to ics vice versa and it will work fine
Here is your salvation installation
Dear KTM690 :
No need To Panic, here is your solution :
Let's suppose you are on the Stock LPF now :
1- Download the corresponding Rooted Kernel by Chainfire : I got it for you : http://download.chainfire.eu/176/CF-Root/SGN/CF-Root-SGN_ZS_OZS_LPF-v5.6-CWM5.zip
2- Extract it, you will have a tar file, Flash it with PC odin.
3- Reboot, now you are rooted and you have cwm recovery at the same time
4- Download the AbyssKernel V4.2 only : http://www.mediafire.com/?c65mndvpk6ocbaa
5- Put the zip file on your sdcard, don't extract it
6- Choose what ever ICS rom you like, let's say the TMT v1.4 that you wanted.
7- Put the zip file on your Sdcard.don't extract it
8- now shut off your phone, Press the Vol Up, Power and the Home Buttons at the same time, and you will be into cwm recovery mode.
9- Don't wipe anything, and Flash the AbyssKernel v4.2.
10- Don't reboot the phone, still in cwmr, go to advanced and choose reboot recovery.
11- You are now in recovery mode again, but with the Abyss Kernel instead of the rooted LPF one by chainfire.(now you have cwm touch recovery, tap with your finger now)
12- So It is totally safe now : wipe everything : data, cache, go to advanced and wipe dalvick cache, and battery stat, choose also Fix permissions while you are there.
13- choose back to go to the first screen,
Now you have Options, depending on what you have dowloaded as a Rom file...
14- If you want to flash the backup zip file from TMTv1.4 : choose backup and restore, and choose restore from internal sdcard, and look for your downloaded TMT zip file. (It should be clockworkmod/backup/TMT1.4...... Folder), I suppose you already have done it.!
15- If you have dowloaded the flashable TMT zip file, then choose install zip file, and choose file from internal sdcard..
In either cases : Reboot and you are done.
This is the cleanest installation you could have done, just don't skip any step !!!!
If this Helped, The thanks Button is next to you, ....and check my MOD : the 15 toggles in case .....
http://forum.xda-developers.com/showthread.php?t=1620625.
Good Luck.
Okay just flash whatever ROM you want (even if there are FCs), go into stock recovery (volume up home and power) and wipe data and cache. Reboot. This solved all the FCs for me when I had the same problem. Worth trying!
Sent from my GT-N7000 using XDA
kimifender said:
Dear KTM690 :
No need To Panic, here is your solution :
Let's suppose you are on the Stock LPF now :
1- Download the corresponding Rooted Kernel by Chainfire : I got it for you : http://download.chainfire.eu/176/CF-Root/SGN/CF-Root-SGN_ZS_OZS_LPF-v5.6-CWM5.zip
2- Extract it, you will have a tar file, Flash it with PC odin.
3- Reboot, now you are rooted and you have cwm recovery at the same time
4- Download the AbyssKernel V4.2 only : http://www.mediafire.com/?c65mndvpk6ocbaa
5- Put the zip file on your sdcard, don't extract it
6- Choose what ever ICS rom you like, let's say the TMT v1.4 that you wanted.
7- Put the zip file on your Sdcard.don't extract it
8- now shut off your phone, Press the Vol Up, Power and the Home Buttons at the same time, and you will be into cwm recovery mode.
9- Don't wipe anything, and Flash the AbyssKernel v4.2.
10- Don't reboot the phone, still in cwmr, go to advanced and choose reboot recovery.
11- You are now in recovery mode again, but with the Abyss Kernel instead of the rooted LPF one by chainfire.(now you have cwm touch recovery, tap with your finger now)
12- So It is totally safe now : wipe everything : data, cache, go to advanced and wipe dalvick cache, and battery stat, choose also Fix permissions while you are there.
13- choose back to go to the first screen,
Now you have Options, depending on what you have dowloaded as a Rom file...
14- If you want to flash the backup zip file from TMTv1.4 : choose backup and restore, and choose restore from internal sdcard, and look for your downloaded TMT zip file. (It should be clockworkmod/backup/TMT1.4...... Folder), I suppose you already have done it.!
15- If you have dowloaded the flashable TMT zip file, then choose install zip file, and choose file from internal sdcard..
In either cases : Reboot and you are done.
This is the cleanest installation you could have done, just don't skip any step !!!!
If this Helped, The thanks Button is next to you, ....and check my MOD : the 15 toggles in case .....
http://forum.xda-developers.com/showthread.php?t=1620625.
Good Luck.
Click to expand...
Click to collapse
Thanks for you advise kimifender & everyone else.
I carried this out and now everything is back to normal.
I was just too worried about wiping everything because of the SuperBrick bug.
KTM690 said:
Thanks for you advise kimifender & everyone else.
I carried this out and now everything is back to normal.
I was just too worried about wiping everything because of the SuperBrick bug.
Click to expand...
Click to collapse
Glad for you
Hey Guys,
I have this problem where i cant seem to flash to any new roms in CWM with the new roms in zip files on my SD card.
I have tried flashing to new kernels but it doesn't seem to change anything.
The last rom i flashed was Criskelo v7 and i haven't changed because i cant every time i try to flash something new in CWM it seems like it only just starts to do it then freezes and i leave it because it might be working and it always end up rebooting and then i find I'm back on Criskelo v7 as if its a fresh install and it need my google account / full setup as if its new but no new rom.
I have also tried updating CWM with odin it works to update odin but it still cant flash any new roms.
Am i doing something wrong? please if anyone has any idea let me know.
Sorry if this has been covered but i really did try and find similar problems.
Thanks
What does the screen read? Error 7?
Sent from my GT-N7000 using xda app-developers app
Flash ANy ROMS
Dr_Rag
if you want to flash any roms using cwm,
1. Flash Safe kernels like Hydracore (http://forum.xda-developers.com/showthread.php?t=1749863) or Philz Kernel (http://forum.xda-developers.com/showthread.php?t=1877270).
2. Reboot in recovery
3. Do all 3 wipes (wipe data, wipe cache partition & wipe dalvik cache)
4. Flash romzip
5. Reboot
If you want to flash XXLS7 TW JB Dump Based Roms , then
1. Flash Safe kernels like Hydracore (http://forum.xda-developers.com/showthread.php?t=1749863) or Philz Kernel (http://forum.xda-developers.com/showthread.php?t=1877270).
2. Reboot in recovery
3. Do all 3 wipes (wipe data, wipe cache partition & wipe dalvik cache)
4. Format /system & /preload in mount and storage
5. Flash romzip
6. Reboot
BTW what rom you are going to install
I had a similar issue and it was a root issue.
To see if it is the same for you, if you have SuperSU, open it, and press 'Continue' if prompted to update binary. If this fails, your problem is root related, the solution of which is below. Unfortunately I don't know how else to test if you don't have SuperSU or if the update prompt doesn't appear.
Below is how I fixed the problem. It may not work for you, and if it doesn't, it's not my fault.
Also note this method will fix the issue no matter what caused it, and wipes data, so backup what you need. It also assumes your ROM is flashable.
1 Put your ROM anywhere in /storage/sdcard0 on your phone.
2 Go to hotfile.com/dl/155490069/c7932d4/N7000XXLPY_N7000OXALPY_DBT.zip.html on your computer to download N7000XXLPY_N7000OXALPY_DBT.
4 Extract this to produce N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5.
5 Flash this through Odin.
6 After your phone reboots (you can't get into the actual OS so you must do this in the Samsung boot animation), enter recovery.
7 Wipe data and cache.
8 Enter download mode.
9 Go to puu.sh/1q5mJ to download GL_NOTECORE_HYDRACORE_v4-3b_STD.tar.
10 Flash this through Odin.
11 After your phone reboots (you don't need to wait to get into the actual OS - you can do it in the Samsung boot animation), enter recovery.
12 Flash your ROM.
My Samsung Galaxy Note N-7000 is stuck on Samsung logo, I have some photos still not backup, I tried to root my device but unsuccessful:crying:. How can i backup my data? or what can i do in recovery mode?
What steps did you take to root?
Sent from my GT-N7000 using xda premium
Thank you for your reply. Here are the steps i did:
1. I was download a file (00-Note_ICS_Root) on other website. when i unzip this file, there are two files CWM.zip (clockworkmod recovery) & SU-Busybox-Installer.zip.
2. Copy them to external micro sdcard, and boot into recovery mode
3. Choose "apply update from external storage"
4. Go to "00-Note_ICS_Root" folder and choose CWM.zip, the screen show a few lines of texts and boot into ClockworkMod Recovery
5. There are 7 options, (1. reboot system now, 2. install zip from sdcard, 3. wipe data/ factory reset, 4. wipe cache partition, 5. backup and restore, 6. mounts and storage, 7. advanced) I was choose option 2, then follow the steps and choose the "SU-Busybox-Installer.zip"
6. After the phone loading something and show completed, reboot system.
00-Note_ICS_Root attached for your reference, thanks!
ICS and cwm.zip: risk of hard bricking your device.
So, if you only choose option 2 this shouldn't have happened until now.
But stop using this!
First of all get into safety:
Download a JB stock Rom and install it with PC Odin (read here).
If this works then you didn't brick your device.
After this you can try to root your device again (if you really need this and accept to learn and read).
ThaiDai, I have fixed the problem and get back my data already, thank you so much for your help!
Galaxy Note stuck on samsung screen
karsonleung said:
ThaiDai, I have fixed the problem and get back my data already, thank you so much for your help!
Click to expand...
Click to collapse
How did you fix it?
I recently flashed Paranoid android 3.9 on a Galaxy Note N-7000, was working fine until it switched off. Every time I switch it on, it doesn't go past the "Samsung Galaxy Note" boot page. I can't get to the recovery options either.
Please Help!
Flash a custom kernel tar file from odin (like philz) and thus will give you access to recovery. Then you can reflash the same rom again.
OR
Flash a stock JB rom using odin and phone in download mode.
Sent from my GT-I9500 using xda premium
fuelrodgun said:
How did you fix it?
I recently flashed Paranoid android 3.9 on a Galaxy Note N-7000, was working fine until it switched off. Every time I switch it on, it doesn't go past the "Samsung Galaxy Note" boot page. I can't get to the recovery options either.
Please Help!
Click to expand...
Click to collapse
I had same issue. In recovery mode I did again dirty flashed the pa ROM and then cleared the dalvik cache (which is important)
This should do the trick
Sent from my GT-N7000 using Tapatalk 2
Solution
Please do Following:-
Normally such problems occur if Dirty Flash is made. you need to boot into recovery and wipe data, cache and Delvik Cache.
If you cant boot into recovery unfortunately you have to do what i suggest in succeeding lines;
Download Stock Rom and Odin on PC from here http://forum.xda-developers.com/showthread.php?t=1424997
there is also a guideline how to flash Stock rom with Odin.
Home+Vol Down+ Power button will take you to Download Mode. Press volume up button once and connect the phone to PC. Open Odin and Flash the stock rom (Complete Guide on above referred thread)
Once done with it .. let the phone to start
Now download Philz Recovery from here http://forum.xda-developers.com/showthread.php?t=1901191
Please remember to download corresponding recovery as mentioned in Post 2 & 3
Put it into SD card
Now boot into Recovery mode. With Default Recovery Flash Philz Recovery and Reboot into Recovery.
Now your Note is rooted and you can safely install any Rom .. Remember always be on safe kernel before you flash any rom
Hello All
Last time I open my Path App and Suddenly my phone shutdown itself
Then when it was reboot, it stuck in ""Samsung GT-N700 Galaxy Note" Screen, the one that come out before the samsung loop logo
I can still open the Recovery and Download Mode
What i already do (at the end it still stuck )
1. I do Factory Wipe and then reboot, but still it stuck in the same screen
2. I use odin to re flash my stock rom with the same stock room, still stuck
My GNote was not rooted yet, all of it was stock
Please anyone help me
What Android version did you use? JB or ICS?
Do you get errors when flashing with Odin?
ThaiDai said:
What Android version did you use? JB or ICS?
Do you get errors when flashing with Odin?
Click to expand...
Click to collapse
I use JB
when i flashing with odin evertyhing fine, but.. when it says "RESET" my phone is reboot, but then it still stuck
Odin still says "RESET" then about 5-10 minutes it become "PASS"
but still my phone is stuck
am i need flash it with other rom?
anyway i get some problem, i can open my recovery but when i press my power button it cannot select any of recovery menu. But i still can navigate wiht Volume button
u can open the recovey so u dont need to worry
firstly do a complete wipe of all user and system data
if u are on plilz recovery there is a option to do so in the wipe data factory reset option called "clean to install a new rom" do it
thenif u have a official jb 4.1.2 firmware flash it via odin if u want to go back to stock or there are many kk roms and customized 4.1.2 roms available here do a research and flash whatever u like
pratzzz said:
u can open the recovey so u dont need to worry
firstly do a complete wipe of all user and system data
if u are on plilz recovery there is a option to do so in the wipe data factory reset option called "clean to install a new rom" do it
thenif u have a official jb 4.1.2 firmware flash it via odin if u want to go back to stock or there are many kk roms and customized 4.1.2 roms available here do a research and flash whatever u like
Click to expand...
Click to collapse
I even cannot select any of sub menu in recovery
mikedarari said:
I even cannot select any of sub menu in recovery
Click to expand...
Click to collapse
You currently have the stock recovery, not Philz.
Go into your current recovery and go to factory reset/data wipe (use the volume up and down keys), to select it use the power button. Once you have factory reseted your device, reboot.
If that doesn't fix it then do the following:
Download any recent Philz Kernel for JB from here: http://forum.xda-developers.com/showthread.php?t=1901191
Copy that to your external sd card (go into recovery and connect your Note to your PC or if that doesn't work, do it through a different phone or an microsd card reader). Flash that file in the stock recovery, reboot to recovery again. Once you have philz, perform a full wipe (you should have that option in factory reset/data wipe otherwise wipe /system /preload /data). Once that is done, reflash with Odin and then again: go to the stock recovery and perform a factory reset and reboot, now it should be working.
i wonder if there is a way out of a bootloop that works no matter what, as long as you can enter download mode.
after reading for 3 days and flashing everything i could (flashing stock ROM, WIPE_I8190.tar.md5, PARAM_I8190.tar.md5, "LeFreu" I8190 серв. укр) it all gave me the same result: bootloop.
i made a back up before flashing a custom ROM (Dmod V6 and Virginity V3 as they seemed like the best ones) so if any of u help me access CWM recovery or TWRP i could do a restore and make my phone work again.
NOTE: the only way i managed to use CWM recovery the first time was rooting with odin "I8190XXALL2_I8190OXXALL1_HOME_rooted_by_avicohh" and then downloading rom manager from the playstore
the attached screenshot shows my device info from factory, can anyone help me restore my phone?
gimmesansa said:
i need serious help.
i have a galaxy s3 mini gt-i8190 and im stuck on a bootloop
i bought it in new sealed condition and it came with this firmware (see attached screenshot)
and when i tried to update it a window popped saying that my device was modified and that software update were not available.
i decided to root my phone so i could install a new rom.
i downloaded all the software i needed including drivers dor the usb samdung devices and enabled usb debuging in developer options
then i used odin to flash I8190XXALL2_I8190OXXALL1_HOME_rooted_by_avicohh
then i tried flashing custom recovery via odin also
everything went normal but custom recovery was not sticking, meaning no matter what type of custom recovery i flashed (twrp, cwm) i ended up having 3e stock recovery.. (NOTE: the 3e stock recovery before AND after flashing rooted ROM, had always a broken android on the floor with an exclamationg sign in its chest) so i tried another method:
i downloaded root checker from the playstore and rom manager. after checking i was rooted (wich i was) i flashed cwm recovery and succesfully was able tu boot into cwm recovery. i did a back up in both, internal storage and external sd, and procedded to flash Dmod V6. i followed the aroma installer and when it finished i selected reboot system now and got a bootloop.
i entered in cwm recovery and did a restore. did a full wipe (data, cache and dalvik) and tried flashing another rom: virginity ROM. followed the aroma installer and selected reboot system now, the result was bootloop.
when i was trying to do another restore the recovery told me that the system would try to flash stock recovery again and i choosed to keep the cwm recovery.
at this point my phone was able to turn on and boot normally. tried again to flash via cwm the virginity rom and got a bootloop again. so i went to do another restore and this time i choosed diferently (flash stock recovery) and when the restore ended i selected rebbot system now and got a bootloop AGAIN.
now i cannot enter CWM recovery (i guess that is obvious because i choosed to flash stock one)
i have readed 3 days now and tried everything that the forums say: flashing stock firmware, flashing WIPE_I8190.tar.md5, flashing PARAM_I8190.tar.md5 and still ended with a bootloop. tried flashing I8190 серв. укр (LeFleur) and nothing, absolutely nothing works.
i even downloaded Unified_Android_Toolkit_v1.2.8 and tried to flash stock firmware but nothing seems to work. all my phone does is bootloop, and boot into download mode.
can a serious developer help me solve this? im about to give up.... and that seriously affects me because im not a quitter.
any help would be greatly apreciated...
Click to expand...
Click to collapse
Odin v3.07 for Windows: http://androidcentral.us/2013/11/download-odin/
Samsung USB drivers: http://developer.samsung.com/android/tools-sdks/Samsung-Android-USB-Driver-for-Windows;jsessionid=YQkGJjBRhc4x1DMTJZCy1pnhGKcb20v4yGtdQZp6NpjhsR5p2KBM!2021479002
A Rom from http://novafusion.pl/ for the Samsung Galaxy S3 Mini (select Downloads / CyanogenMod / KitKat 4.4.4 (CyanogenMod 11.0) 20140923 / odin)
And then perform this steps:
1) Install the USB drivers.
2) Run Odin v3.07.
3) In opened window, click on PDA button and select CyanogenMod rom with .tar.md5 extension.
4) Make sure that only Auto Reboot and F.Reset Time are selected on the left side.
5) Turn off your phone, and then use VOL- & HOME & POWER buttons combination.
6) If you see Warning screen, use VOL+ button.
7) Connect phone to computer and make sure it is detected by Odin (it will appear as COM device). If it doesn’t, try to use other USB port.
8) Use Start button. Wait until flash process will finish.
9) Your phone will restart.
10) Wait for boot.
11) If your phone restart, but won’t boot pull down your battery and use VOL+ & HOME & POWER buttons combo to boot into recovery.
12) Click on Wipe / Advanced Wipe, choose Dalvik Cache and Cache and swipe to wipe.
13) Reboot and Enjoy. :laugh:
Btw after the Rom you nead and Gapps from the same site (http://novafusion.pl/)
jstath1972 said:
Odin v3.07 for Windows: http://forum.xda-developers.com/show....php?t=1738841
Samsung USB drivers: http://www.android.gs/download-samsu...s-for-android/
A Rom from http://novafusion.pl/ for the Samsung Galaxy S3 Mini (select Downloads / CyanogenMod / KitKat 4.4.4 (CyanogenMod 11.0) 20140923 / odin)
And then perform this steps:
1) Install the USB drivers.
2) Run Odin v3.07.
3) In opened window, click on PDA button and select CyanogenMod rom with .tar.md5 extension.
4) Make sure that only Auto Reboot and F.Reset Time are selected on the left side.
5) Turn off your phone, and then use VOL- & HOME & POWER buttons combination.
6) If you see Warning screen, use VOL+ button.
7) Connect phone to computer and make sure it is detected by Odin (it will appear as COM device). If it doesn’t, try to use other USB port.
8) Use Start button. Wait until flash process will finish.
9) Your phone will restart.
10) Wait for boot.
11) If your phone restart, but won’t boot pull down your battery and use VOL+ & HOME & POWER buttons combo to boot into recovery.
12) Click on Wipe / Advanced Wipe, choose Dalvik Cache and Cache and swipe to wipe.
13) Reboot and Enjoy. :laugh:
Btw after the Rom you nead and Gapps from the same site (http://novafusion.pl/)
Click to expand...
Click to collapse
Links are broken...
gimmesansa said:
Links are broken...
Click to expand...
Click to collapse
Try now or search again here http://novafusion.pl/downloads/ (select Downloads / CyanogenMod / Extras)