Every now and then it will just start opening files by itself, you can't get it to stop. Wondering if the nook screen protector i'm using could be causing it...it seems to start when i'm in the stock browser. Not rooted but am using a sideloaded launcher.
Yes screen protector can.
someone0 said:
Yes screen protector can.
Click to expand...
Click to collapse
k thanks, thought it might be doing it...$20 down the toilet.
krighton said:
Every now and then it will just start opening files by itself, you can't get it to stop. Wondering if the nook screen protector i'm using could be causing it...it seems to start when i'm in the stock browser. Not rooted but am using a sideloaded launcher.
Click to expand...
Click to collapse
I find with my screen protector that I have to wipe the oily prints off. They don't show but they make the device go wonky after a while.
Sent from my Nook HD+ Running CM10
Aside from the screen protector, I also notice that the touchscreen itself is very finicky. I means say if something that need to hit and hold like an icon to get menu popup. It's extremely hard to get the popup, even if you hold it pretty steady. I have nova launcher on both my Nook HD+ and Galaxy Note II, of course we can't compare build material here. Note II is just on another level in term of hardware wise. But the touch is just way more solid on the Note II.
someone0 said:
Aside from the screen protector, I also notice that the touchscreen itself is very finicky. I means say if something that need to hit and hold like an icon to get menu popup. It's extremely hard to get the popup, even if you hold it pretty steady. I have nova launcher on both my Nook HD+ and Galaxy Note II, of course we can't compare build material here. Note II is just on another level in term of hardware wise. But the touch is just way more solid on the Note II.
Click to expand...
Click to collapse
I noticed it too. I think it is something in stock. My CM10 is much better.
Sent from my Nook HD+ Running CM10
If you decide to remove the screen protector, and it no longer behave like it was processed. Would you go into the Accessories forum and post there, please tell us the brand/where you brought also. So other people don't make that $20 mistake.
leapinlar said:
I noticed it too. I think it is something in stock. My CM10 is much better.
Sent from my Nook HD+ Running CM10
Click to expand...
Click to collapse
Indeed, yes, I noticed it too. I figured it was just the way I was holding/clicking it, but I suppose not. It must be either a problem with the hardware, or as leapinlar stated, probably the stock ROM.
i was using one of the B&N clear protectors...I removed it and it still does it though not as bad....i'm hoping it's just the fingerprints causing it. I was in the B&N store earlier looking around, it started clicking on things on it's own, though not as frantic as when i had the screen protector on. With the protector on it was clicking so fast i couldn't get out of it, had to hold down the shutdown button.
i posted about the protector on the accessories forum.
Hm.. that sounds off krighton. I'm starting to think it could be a software issue. But before we dig into that, I think perhaps you should clean your screen as much as you can. If not, then you could try reinstalling your OS. I'm not too sure, is that possible? If so, or even if you can't, see if you can get anything done under warranty; since reinstalling could be a hassle.
I'm not too sure if warranty is available; I purchased the Nook HD+, and it didn't say anything about warranty, although I'd like to know. If anyone knows anything about warranty, could I please ask for your input? Thank you!
should get a standard 1 year warranty with the device....yeah sounds weird, cleaned the screen i 'll see what happens...would hate to mail it back in after rooting.
Just do 8bootloop b4 sending it back. But you should still at least try getting refund forthe screen protector if it cost you $20.
yeah, i'll check that out...actually bought 2, the non glare and the clear....didn't like the non glare so i'll eat that one but the clear should have worked without problems.
Which screen protector did you buy? I'm considering doing Invisible Shield. I have always had good luck with it on my phone.
I'm probably an odd person, but I never use screen protectors. It seems that the glass is tough enough for finger nails and the occasional contact with whatever else. However, I do believe in cases
Solidsnake726 said:
I'm probably an odd person, but I never use screen protectors. It seems that the glass is tough enough for finger nails and the occasional contact with whatever else. However, I do believe in cases
Click to expand...
Click to collapse
I did it for fingerprints. The bare HD+ was awful. My anti-glare hides them, but I do have to wipe occasionally to prevent that wonky problem.
Solidsnake726 said:
I'm probably an odd person, but I never use screen protectors. It seems that the glass is tough enough for finger nails and the occasional contact with whatever else. However, I do believe in cases
Click to expand...
Click to collapse
I always intend to get a screen protector, but never quite get around to it. That said, my Nook Color's screen is mint after a couple years' use with a case, but without a screen protector. My phone came used with a nick in the screen, but isn't much the worse for wear even bouncing around in my pockets for a year and change.
I haven't had any trouble with the clear B&N screen protector. I'm a believer in screen protectors since I somehow managed to scratch the screen of my first nook while plugging in the usb cable. I find the anti-glare type take away from the sharpness of the screen too much though.
screen is pretty sensitive, just a few fingerprints and it turns pages on its own. Guess i need to find a better screen protector, cleaning the screen several times a day is a bit annoying.
Could rooting have caused any of these problems? When it happens i have to turn off the nook, wipe it down really good and then it works for a while until it starts flipping pages on its own again. Maybe my nook is just hypersensitive to fingerprints.
Related
Does anyone use the screen covers or anything like it? Or does anyone think its pointless? Need some guidance on what to do. Thanks!
professortrev said:
Does anyone use the screen covers or anything like it? Or does anyone think its pointless? Need some guidance on what to do. Thanks!
Click to expand...
Click to collapse
i didn't think i did when i got my first g1 but then my jeans put a few small scratches in the screen so when i got second phone a week ago i ordered the ZAGG invisibleshield for it, i haven't gotten it yet but should tomorrow or the next day, but i would definitely recommend getting one.
The absolute best protector I've ever used is the one made by Seidio. It's a dry install and the film is as smooth as the screen itself. I've also used the Zagg Invisible Shield..it's nearly inpenetrable, but it takes away much of the smoothness of the original screen, so your finger won't glide as smoothly. It's texture is also very much like orange peel. Also, you have to use a wet method to install this...it's not really a big deal, but some are weary of taking the risk.
Right now, I'm using the Clear Protector, which is a lot like Zagg, but smoother in texture. Kind of in between the two. Definitely closer to the Zagg though, and the install is done the same way.
For what it's worth, I've thought about it a lot recently. I'm so anal, that if any part of my phone got beat up i'd be irritated and looking to replace it. So if it falls hard enough to scratch the screen either way, it'll probably be getting replaced shortly thereafter... but I also have a dedicated pocket where I don't put anything in with my phone, so I don't have to worry about things like key scratches.
Cliff's notes: You probably don't need one if you're like me...but if you're not, look at the Seidio or Clear Protector.
@uansari1 completely off topic, but i noticed that i can't get the stock cupcake download off of google's code page, so thank you for uploading it somewhere else
i use the screen protectors from tmobile for the mt3g on my g1. they fit perfect and work really well. 10 bucks for 2 was a little steep i thought, but i got to cover both my g1's so it was worth it!
david1171 said:
i didn't think i did when i got my first g1 but then my jeans put a few small scratches in the screen so when i got second phone a week ago i ordered the ZAGG invisibleshield for it, i haven't gotten it yet but should tomorrow or the next day, but i would definitely recommend getting one.
Click to expand...
Click to collapse
I have the ZAGG full body cover. It's not bad. The protection is great, it ever saved me from cracking my screen a few times butcause of the way it's bonded. The only things I don't care for is the fact that it kinda looks like an orange peel, (you understand when you put it on), and your fingers stick to, rather than glide across the screen.
david1171 said:
@uansari1 completely off topic, but i noticed that i can't get the stock cupcake download off of google's code page, so thank you for uploading it somewhere else
Click to expand...
Click to collapse
You're welcome.
Thanks everyone for their input. I think I'm going to get the Seidio one.
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
s15274n said:
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
Click to expand...
Click to collapse
its o.k. it adds noticeable bulk
s15274n said:
Anyone use their case?
http://www.seidioonline.com/product-p/csr2tmg1-bk.htm
Click to expand...
Click to collapse
Make sure you read the directions... Seidio puts a nice tab on their protectors to make installation a breeze. Just make sure your screen is totally dust-free first.
Hi - I rooted my nook about two days ago, it was working great, but now it seems to have gone all whack.
It is opening apps by itself without me pressing any command, it opens apps, moves the home screen, etc., all by itself, i have to try hard to force a reboot.
Even then after a few seconds it goes off on its own.
It's on 1.1.0 with Auto Nooter 3.0
Not sure what's going on here, any help?
I thought it was due to a app i installed so i uninstalled like the last 5 apps
Thanks
Any help guys - do I just reset to factory and do it again?
Is there a lot of finger prints on the screen? I read about that being an issue... And when I was buying a screen protector last week, even the B&N clerk said finger prints can cause all sorts of weird problems on it.
Hopefully it is something that simple.
Sent from my ADR6300 using XDA App
I'd clean the screen really well. If it's still doing weird things or being unresponsive, try recalibrating the screen.
There are a lot of fingerprints, that might be the issue, i'll power it off and wipe it out down using a lint cloth or microfiber.
What is the method to recalibrate by the way, just in case.
Also, I think I need to find a good screen protector like zagg or bestskinsever (hopefully they release it soon as im waiting for it).
Thanks
I believe Zagg has a shield for the NC already. A lot of folks (including me) use the antiglare shield sold at B&N. Nice for reading and has a nice smooth finish.
Here's the link to recalibrate your screen. Good luck!
http://nookdevs.com/Recalibrate_the_NookColor_touch_screen
I have Nook HD+ running CM10. I have noticed I get problems every time I use it'
. These are screen presses to top or bottom bar when I'm not touchin screen. Happens no matter what I'm doing weather browsing net or on play store. Also happens when running stock nook. Doesn't go away till I lock screen then unlock. Always happens within 30 min of using device.
Some people have said it just dirt or smudges but this happens a lot and is really annoying. Also never had this problem with other devices such as galaxy note phone.
Could it be defective? Any advice?
It can be defective and not. This depends now (if i read your description) at many things.
Yes the main and one possibility can be dirty screen (many fingerprints). Why i think this is main reason? Because you describe that this random presses start after 30 min usage. You press screen within 30 min a lot i think.
Nook HD+ digitizer is not at glass, like most of phones and other stuff. Nook used some type plastic for it. I noticed this when i took apart my test item. Maybe they used some new technical solution on digitizer construction, but i have not seen this type before (wrong, just remembered that Dell uses same on some laptops with touchscreen). And the digitizer itself is rather soft. That is why you never had this with phones.
I know that B&N support is horrible, but try to ask anyway. Just see what they say.
About a month ago, there is one person report random touch occur but he had a screen protector on. If you have one on also, it maybe the cause of your problem.
someone0 said:
About a month ago, there is one person report random touch occur but he had a screen protector on. If you have one on also, it maybe the cause of your problem.
Click to expand...
Click to collapse
This maybe true because these protection films are all very different material. Some may act with digitizer very strangely.
I actually use on all my 12 items Fosmon cheap anti-glare protectors and no problem. But yes, this Fosmon not the best one.
Thanks for replays. No screen protector. B&N support just asked me to reset device and said it def not a screen prob. I'll test it over next few days. Might just have to return it.
arnoldsback said:
These are screen presses to top or bottom bar when I'm not touchin screen. Happens no matter what I'm doing weather browsing net or on play store. Also happens when running stock nook. Doesn't go away till I lock screen then unlock.
Click to expand...
Click to collapse
I have the exact same issue; it seems random when it happens to me.
The random extra "top or bottom" click and the lock/unlock to fix it is the same as me.
I just deal.
curiousmike said:
I have the exact same issue; it seems random when it happens to me.
The random extra "top or bottom" click and the lock/unlock to fix it is the same as me.
I just deal.
Click to expand...
Click to collapse
Thought today it might be caused by faulty sd card so removed it. Was stable for longer but still did it later on - so not sd card. B&M have agreed to replace it but will take up to 3 weeks as apparently I have to send it back to Poland. Better than nothingI guess.
Hopefully next one is more stable. Quite liked CM10 was running great off my 32gb sandisk.
While we are here. Is it normal for device to get warm? I presume it is.
arnoldsback said:
While we are here. Is it normal for device to get warm? I presume it is.
Click to expand...
Click to collapse
Yes, especially on the back near where your left hand is when you hold it in portrait. That is where the microprocessor is.
Sent from my Nook HD+ running CM10 on SD
Glad to see that you got solution.
datas0ft said:
Glad to see that you got solution.
Click to expand...
Click to collapse
Thanks for the help everyone. Nook getting picked up today. Will get a new one in a few weeks. Like I said hopefully that one will be more stable as I think it is a great device. With CM10 on it, it is fantastic value for money.
I have seen a few threads and youtube videos about screen issues on the nook HD+.. so this is a common issue?
I have a nook e-ink reader and the touchscreen is horrible.. it gets crazy with presence of minor dust ... unusable... ghost touches.. inaccurate touches.. horrible
I purchased a Nook HD+ last weekend and I've noticed that on the long dimension the screen curves a bit inward. More so on one side than the other. I carefully placed a straightedge on the surface of the screen and eyeballed it by looking at light that leaked through. Observed light shining through between the surface of the screen and the edge of the straightedge at the middle of the screen. Worst case is about 1mm. If I look down the long edge of the body a slight curve is plainly evident.
I went by the store today and looked at all the display models and a few were much worse than my HD+. Salesperson agreed with me that it was what he was seeing too. Then said, "I have one and I've never noticed that before."
Whatever! Anyone else notice this on the HD+?
I asked about a replacement. Salesperson was not eager to do that. I still have a few days to think about that. Frankly I was a bit peeved. If no one else here has observed a concave screen, I'll insist they replace and make certain to get a straighter / less concave one.
I did a reflection test with my Nook HD+ screen and did not notice any distortion, the screen is flat.
However, if the battery is swelling a bit that might explain the distortion. And if the battery is swelling, I would insist on a replacement!
TonyBigs said:
...if the battery is swelling, I would insist on a replacement!
Click to expand...
Click to collapse
Yeah, something like that is my concern, You said the screen is flat, but do you notice any curve when sighting along the edge of the body?
liasom said:
Yeah, something like that is my concern, You said the screen is flat, but do you notice any curve when sighting along the edge of the body?
Click to expand...
Click to collapse
Mine has no curvature of the screen, but does have a very slight concave curvature on the left side just above the hole. But that is where I put my left thumb when holding the device in my left hand, so it is probably compressed a bit from hours and hours of holding it. And now that I look again the right side has a very slight concave curvature.
I have two devices and just looked at the other one, which is older, and it has just a slight curvature on the screen and distorts reflection just a bit. And both sides bend slightly.
I hope you have not caused me to be distracted by it now. LOL.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I have two devices and just looked at the other one, which is older, and it has just a slight curvature on the screen and distorts reflection just a bit. And both sides bend slightly.
I hope you have not caused me to be distracted by it now. LOL.
Click to expand...
Click to collapse
I'm going to insist on a replacement and hope I get a "newer" one.
FYI this HD+ is also one that doesn't like to boot to sd card easily, so I hope to kill two birds... BTW thanks for your work on the rom etc. and particularly for Extras.zip! :good:
liasom said:
I'm going to insist on a replacement and hope I get a "newer" one.
FYI this HD+ is also one that doesn't like to boot to sd card easily, so I hope to kill two birds... BTW thanks for your work on the rom etc. and particularly for Extras.zip! :good:
Click to expand...
Click to collapse
I don't see any curve in my display (shipped last week from bn.com). I agree, thanks for the mods & extras & warnings about what to backup and what not to do (write to system) :good:
Update
Took the concave HD+ back and got a new one as a replacement. It is "straight" BUT almost every time I tap on the screen near the N button it makes an annoying sound. AND, something else, the bezel that surrounds the screen to the left of the N button makes a snapping/popping sound if you're holding it there and then release it. Like something is not glued or assembled right. At any rate something isn't right.
Yikes, back to the store again before this Thursday and the end of the 14 days.
liasom said:
Took the concave HD+ back and got a new one as a replacement. It is "straight" BUT almost every time I tap on the screen near the N button it makes an annoying sound. AND, something else, the bezel that surrounds the screen to the left of the N button makes a snapping/popping sound if you're holding it there and then release it. Like something is not glued or assembled right. At any rate something isn't right.
Yikes, back to the store again before this Thursday and the end of the 14 days.
Click to expand...
Click to collapse
I have the same problem you are describing. I am not sure if I should get it replaced. I have already sent my NOOK back once, because of a loose bezel and a LCD issue.
Did you have luck with your third NOOK? What would you say - should I get a third one?
JanSpatschek said:
I have the same problem you are describing. I am not sure if I should get it replaced. I have already sent my NOOK back once, because of a loose bezel and a LCD issue.
Did you have luck with your third NOOK? What would you say - should I get a third one?
Click to expand...
Click to collapse
I finally got one on the third try that was satisfactory (relatively non-concave and no popping/cracking noise) and have had no problems since then. I think if you're not happy B&N should take care of that.
liasom said:
I finally got one on the third try that was satisfactory (relatively non-concave and no popping/cracking noise) and have had no problems since then. I think if you're not happy B&N should take care of that.
Click to expand...
Click to collapse
Okay, well then I will give it another try. Can I just go to the store with the receipt and get a new one? (I am still under 14 days).
Sent from my BN NookHD+ using Tapatalk 4
JanSpatschek said:
Okay, well then I will give it another try. Can I just go to the store with the receipt and get a new one? (I am still under 14 days).
Sent from my BN NookHD+ using Tapatalk 4
Click to expand...
Click to collapse
As long as you have registed stock you don't even need a receipt. Just go to the store.
Sent from my SCH-i705 using XDA Premium 4 mobile app
leapinlar said:
As long as you have registed stock you don't even need a receipt. Just go to the store.
Sent from my SCH-i705 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay, I was able to get a new one. It was the last one in stock. I tested it in the store and it wasn't completely flat either. They guy said, he doesn't know why - hasn't happened before. He also said, he isn't sure if BN will produce anymore. They won't get any new ones. So I took the new, bent one.
The device is working fine, just the body is slightely bent again.
Well, I will have to live with it. I don't want to send it away and maybe just get my money back, because they stopped making the HD+.
Sent from my HTC Sensation using Tapatalk 4
Hi, has anybody else experienced that their screen goes blank and doesn't come back on when on a call and what makes it worst is I can't hang up my phone after I'm done with my call. Basically I'm at the mercy of the other person hanging up when the conversation is done, the only way that I have resolved this problem is when I restart my phone. What causes this problem?
Do you have a tempered glass screen protector on?
Look to the left of the top speaker and you will see two sensors (proximity and ambient light). Is there anything covering these, such as a screen protector, skin, or case?
I do have a screen protector on the phone. Should I just remove it? I just find it strange that once I restart the phone that everything works as it should.
mr.pnutt said:
I do have a screen protector on the phone. Should I just remove it? I just find it strange that once I restart the phone that everything works as it should.
Click to expand...
Click to collapse
Because it doesn't check that sensor except when you're on a phone call.
mr.pnutt said:
I do have a screen protector on the phone. Should I just remove it?
Click to expand...
Click to collapse
When I bought my first smartphone, a Galazy S2, I bought an expensive (£10) screen protector. All it did was attract grease and fingerprints, so after a couple of months, after a sudden attack of common sense, I threw it away. The screen was suddenly always clean and smooth, and on every phone I've had since there has never been a single mark on any screen. Admittedly I do look after it - unlike colleagues who seem happy to literally throw their phones on to tables - and keep it always in an empty pocket with no coins or keys.
It seems very odd to me that we have incredibly tough glass on our phones (see the many people on Youtube trying to scratch their phones deliberately) and yet we feel the need to reduce their performance with pointless pieces of plastic...? Bizarre...
mr.pnutt said:
I do have a screen protector on the phone. Should I just remove it? I just find it strange that once I restart the phone that everything works as it should.
Click to expand...
Click to collapse
It sounds like your sensor maybe going. I have always kept a screen protector on my device and never had issues until I used a tempered glass one. The tempered glass was to thick to allow the proper amount of light in which kept the screen from coming on when a call came in or when on a call.
I would run a logcat and try to catch it happening. This will tell you just what is going on.
dahawthorne said:
When I bought my first smartphone, a Galazy S2, I bought an expensive (£10) screen protector. All it did was attract grease and fingerprints, so after a couple of months, after a sudden attack of common sense, I threw it away. The screen was suddenly always clean and smooth, and on every phone I've had since there has never been a single mark on any screen. Admittedly I do look after it - unlike colleagues who seem happy to literally throw their phones on to tables - and keep it always in an empty pocket with no coins or keys.
It seems very odd to me that we have incredibly tough glass on our phones (see the many people on Youtube trying to scratch their phones deliberately) and yet we feel the need to reduce their performance with pointless pieces of plastic...? Bizarre...
Click to expand...
Click to collapse
I just find it to be strange that I have put screen protectors on all of my phone's even some with the sensors but this is the only phone that does this.
dahawthorne said:
When I bought my first smartphone, a Galazy S2, I bought an expensive (£10) screen protector. All it did was attract grease and fingerprints, so after a couple of months, after a sudden attack of common sense, I threw it away. The screen was suddenly always clean and smooth, and on every phone I've had since there has never been a single mark on any screen. Admittedly I do look after it - unlike colleagues who seem happy to literally throw their phones on to tables - and keep it always in an empty pocket with no coins or keys.
It seems very odd to me that we have incredibly tough glass on our phones (see the many people on Youtube trying to scratch their phones deliberately) and yet we feel the need to reduce their performance with pointless pieces of plastic...? Bizarre...
Click to expand...
Click to collapse
I just find it to be strange that I have put screen protectors on all of my phone's even some with the sensors but this is the only phone that does this.
mr.pnutt said:
I just find it to be strange that I have put screen protectors on all of my phone's even some with the sensors but this is the only phone that does this.
Click to expand...
Click to collapse
First before you get ahead of yourself. Find out if it is the screen protector. It is a cheap fix if it works and cheap to replace if it doesnt.
zelendel said:
First before you get ahead of yourself. Find out if it is the screen protector. It is a cheap fix if it works and cheap to replace if it doesnt.
Click to expand...
Click to collapse
How am I about to get ahead of myself? Like I stated, I find it strange that this is the ONLY PHONE that I have ever had this type of problem with.
mr.pnutt said:
How am I about to get ahead of myself? Like I stated, I find it strange that this is the ONLY PHONE that I have ever had this type of problem with.
Click to expand...
Click to collapse
Because you are not sure if that is even the problem. The only time I had this issue was with a tempered glass one. This is a known common issue. I never had this issue with a normal one.
zelendel said:
Because you are not sure if that is even the problem. The only time I had this issue was with a tempered glass one. This is a known common issue. I never had this issue with a normal one.
Click to expand...
Click to collapse
First off, I've never used a tempered glass screen protector. And I have multiple devices with the same sensors but, this is still the ONLY DEVICE that has this problem.
mr.pnutt said:
First off, I've never used a tempered glass screen protector. And I have multiple devices with the same sensors but, this is still the ONLY DEVICE that has this problem.
Click to expand...
Click to collapse
Have you bothered to pull a log at as I advised? This will tell you. Have you tested it without the screen protector as I also advised?
Just because it is the same sensor (which I doubt) doesn't mean it is programmed the same way.
zelendel said:
Have you bothered to pull a log at as I advised? This will tell you. Have you tested it without the screen protector as I also advised?
Just because it is the same sensor (which I doubt) doesn't mean it is programmed the same way.
Click to expand...
Click to collapse
Yes I have. And what I've noticed is that if I erase my call log history or restart my phone, everything goes back to normal.
mr.pnutt said:
Yes I have. And what I've noticed is that if I erase my call log history or restart my phone, everything goes back to normal.
Click to expand...
Click to collapse
Ok then next will be to run the logcat. This will tell you why it is failing.
zelendel said:
Ok then next will be to run the logcat. This will tell you why it is failing.
Click to expand...
Click to collapse
I am running a logcat now and so far I have not experienced the same issue. I'll see what happens this weekend.
I had the same problem some weeks ago WITHOUT a screen protector but it never happened again. Could be the sensor which fails sometimes or a software related error. Are you using the stock phone application and stock kernel?
GioBozza said:
I had the same problem some weeks ago WITHOUT a screen protector but it never happened again. Could be the sensor which fails sometimes or a software related error. Are you using the stock phone application and stock kernel?
Click to expand...
Click to collapse
Yes, everything is stock, not rooted and, my bootloader is still factory locked.
mr.pnutt said:
Yes, everything is stock, not rooted and, my bootloader is still factory locked.
Click to expand...
Click to collapse
If it's a Phone app bug the only thing you can do is deleting its cache and/or reflashing the factory image. If this doesn't solve it, I would say it's an hardware fault, but I'm still prone to think it's software related.